Related
I just flashed Project V with Bali 1.2 over Trigger 3.3b2 with Bullet 1.42 and now, when I turn the wi-fi on, it would work for a little bit (maybe an hour or so), and then it would just lose connection so I can't get online, go to market, etc or anything that needs internet connection. As soon as I turn the wifi off and start using 3G connection, my internet starts working again.
While this is happening, my laptop, ps3, etc can still connect to the internet so I know it's not my router or internet connection.
I never had this problem with trigger. I was wondering if anybody else has this issue? And if there is a fix for this?
Thanks in advance.
Ok, I'm guessing nobody else has this issue?
belly1026 said:
Ok, I'm guessing nobody else has this issue?
Click to expand...
Click to collapse
Try doing all three wipes and rebooting, otherwise you'll need to flash again. Mine is working just fine.
try odin back to jfd, then reflash.
Jdom58 said:
Try doing all three wipes and rebooting, otherwise you'll need to flash again. Mine is working just fine.
Click to expand...
Click to collapse
geoffcorey said:
try odin back to jfd, then reflash.
Click to expand...
Click to collapse
I was trying to avoid having to reflash, but it seems like I'm going to have to.
Thanks!
Yes, Project V is awesome and never had Wi-Fi issues. Only thing that bothered ne about it was the lag on the dialer. It took 10-15 seconds to start dialing after I hit a contact. Anyone else experience this?
belly1026 said:
I was trying to avoid having to reflash, but it seems like I'm going to have to.
Thanks!
Click to expand...
Click to collapse
I reflashed (with the three wipes) and then reflashed bali-x 1.2 and the s.gps fix. I still have the same issue with wi fi. Not sure where I'd gone wrong.
ozayas said:
Yes, Project V is awesome and never had Wi-Fi issues. Only thing that bothered ne about it was the lag on the dialer. It took 10-15 seconds to start dialing after I hit a contact. Anyone else experience this?
Click to expand...
Click to collapse
I personally don't have a problem with the dialer. Everything is snappy for me. It's just the wi fi that's giving me a problem.
I apologize in advance if this was addressed before, I couldnt find a thread that answered my issue.
My phone doesn't cannot to data anymore.
I have been flashing different roms pretty frequently, and I am currently on SpeedRom 7.8
For the past month, data hasn't been working on the different roms I have been using. I don't know what is the cause for this issue.
This issue started when i installed SpeedRom 7.5. From there i jumped from one rom to the next, with data not working.
Can you of guys help me with my predicament?
Thank you
ihustle50 said:
I apologize in advance if this was addressed before, I couldnt find a thread that answered my issue.
My phone doesn't cannot to data anymore.
I have been flashing different roms pretty frequently, and I am currently on SpeedRom 7.8
For the past month, data hasn't been working on the different roms I have been using. I don't know what is the cause for this issue.
This issue started when i installed SpeedRom 7.5. From there i jumped from one rom to the next, with data not working.
Can you of guys help me with my predicament?
Thank you
Click to expand...
Click to collapse
Go to Settings - Data Usage and make sure Mobile Data is "On". This gets turned off sometimes when flashing new ROMs or by accident.
bigragu said:
Go to Settings - Data Usage and make sure Mobile Data is "On". This gets turned off sometimes when flashing new ROMs or by accident.
Click to expand...
Click to collapse
I just checked and It's definetely on.
To expand and clarify the issue, when I turn the data on, there is no data icon at the top of the status bar beside the network strength icon.
ihustle50 said:
I just checked and It's definetely on.
To expand and clarify the issue, when I turn the data on, there is no data icon at the top of the status bar beside the network strength icon.
Click to expand...
Click to collapse
This happens to me occasionally, and my fix for this is to turn airplane mode on and off. It works for me, but I don't know if it will for you though.
Keylogger_0 said:
This happens to me occasionally, and my fix for this is to turn airplane mode on and off. It works for me, but I don't know if it will for you though.
Click to expand...
Click to collapse
This just occurred to me but what i decided to do was to restore my phone back to stock using a backup. It seems to be working now.
@ keylogger I'll keep your adivce in mind, if i come accross this issue again.
Thanks for the help you guys
ihustle50 said:
This just occurred to me but what i decided to do was to restore my phone back to stock using a backup. It seems to be working now.
@ keylogger I'll keep your adivce in mind, if i come accross this issue again.
Thanks for the help you guys
Click to expand...
Click to collapse
Maybe incorrect apn's were entered, had ones that were not for your carrier?
sent from my
NRGized amaze
powered by Faux
I am running stock rooted 4.3 with the tethering fix from runandhide05. Does anyone else have an issue where the stock app takes like 30seconds to finally allow an attached device to browse. My computer connects very fast but ti says there is no network available for a long period of time. Meanwhile the tethering app doesn;t say a device is connected. I really liked wifi tether for root TrevE mod because its connection was instantaneous. Any suggestions or has someone got the old app to work?
Any suggestions??
Same thing happens with FoxFi...sounds like it's a 4.3 thing...
vortmax said:
Same thing happens with FoxFi...sounds like it's a 4.3 thing...
Click to expand...
Click to collapse
I wonder if the framework hack has some bug in it
drewcam888 said:
I wonder if the framework hack has some bug in it
Click to expand...
Click to collapse
No it doesn't.
And to complain about something taking 30 seconds to authenticate, assign an IP and allow passthru....
Anyways this is the norm. To verify you can restore to stock, purchase tether package and verify that's normal.
sent from::§::
runandhide05 said:
No it doesn't.
And to complain about something taking 30 seconds to authenticate, assign an IP and allow passthru....
Anyways this is the norm. To verify you can restore to stock, purchase tether package and verify that's normal.
sent from::§::
Click to expand...
Click to collapse
Wow is all i have to say about that response
drewcam888 said:
Wow is all i have to say about that response
Click to expand...
Click to collapse
Was not trying to come across bad. It's a proven method that involves changing two lines of code. It gets old when people who don't know how something works try to blame the person who does and their method/code.
My suggestion is a valid and proven way to test something that you may find unacceptable
If you don't want the person who wrote the code then don't mention them in your post. Then others who don't know how it works can continue to speculate on what the "problem" is.
/my2cents
sent from::§::
Ok so i have the tmobile sim in my verizon phone I am using the fast.T-Mobile.com apn settings I'm in a 4g area. My issue is my phone rapidly changes from h+ to 3g, to 4g lte and very seldom edge..... Fyi happens as I'm at work so I'm stationary. Data works but kinda lags at times. Any thoughts as to why or what to do??? And I have tried ipv4/6 and just each respectively. Thanks in advance.
If you are set on global try switching to lte gsm utms only and see if that helps
deron37129 said:
If you are set on global try switching to lte gsm utms only and see if that helps
Click to expand...
Click to collapse
I'll give it a go in the morning. Thanks will let u know if it works.
The stock lollipop Rom has an issue with syncing hangouts and gmail. In order to force sync,IPv6 is manually disabled every 1 minute. When that happens, your data connection resets, and you see your phone go up through the speed technologies.
jfsat said:
The stock lollipop Rom has an issue with syncing hangouts and gmail. In order to force sync,IPv6 is manually disabled every 1 minute. When that happens, your data connection resets, and you see your phone go up through the speed technologies.
Click to expand...
Click to collapse
Well that sucks lol. What would you recommend? I'd just like to stop cycling through the data 4g, 3g ect.
SBAKER24 said:
Well that sucks lol. What would you recommend? I'd just like to stop cycling through the data 4g, 3g ect.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=59514506&postcount=2921
This is probably what you seek, but a word of warning; I haven't tried any of this myself. I don't know whether this will work or break your phone. If I were trying to do this, I would probably just comment out that second line (put a '#' in front), but if you start getting sync problems, this will probably be why.
jfsat said:
The stock lollipop Rom has an issue with syncing hangouts and gmail. In order to force sync,IPv6 is manually disabled every 1 minute. When that happens, your data connection resets, and you see your phone go up through the speed technologies.
Click to expand...
Click to collapse
The thread you posted seems to,only refer to Wi-Fi issues and syncing.... I am not connected to Wi-Fi. I read that when they disconnect Wi-Fi there phones are fine with data..... Not sure I wanna delete anything like that off my phone when I'm not,sure off this will help. Of I went back to stock kk would I still have this issue?
SBAKER24 said:
The thread you posted seems to,only refer to Wi-Fi issues and syncing.... I am not connected to Wi-Fi. I read that when they disconnect Wi-Fi there phones are fine with data..... Not sure I wanna delete anything like that off my phone when I'm not,sure off this will help. Of I went back to stock kk would I still have this issue?
Click to expand...
Click to collapse
Theoretically you won't still have this problem if you go back to KK. I haven't gone back to KK since I took the plunge into LP, so don't quote me on that. In fact, if you just install the stock LP ROM, you won't have this problem any more as well.
OR, you could install Jasmine 5.0, and then upgrade it to something like 5.0.7 or 5.0.8, which ever one was before the IPv6 fix started getting baked into the Rom. That's probably what I would do, but I haven't tried SkyDragon yet, so I don't know what I'm missing.
jfsat said:
Theoretically you won't still have this problem if you go back to KK. I haven't gone back to KK since I took the plunge into LP, so don't quote me on that. In fact, if you just install the stock LP ROM, you won't have this problem any more as well.
OR, you could install Jasmine 5.0, and then upgrade it to something like 5.0.7 or 5.0.8, which ever one was before the IPv6 fix started getting baked into the Rom. That's probably what I would do, but I haven't tried SkyDragon yet, so I don't know what I'm missing.
Click to expand...
Click to collapse
Think I'll give jasmine 5.0 a spin. I noticed there is a 5.0.11 changelog says disable the 10 and 1 minute ipv6 not sure if I should try it out or not :/ http://forum.xda-developers.com/showpost.php?p=59517503&postcount=2929
SBAKER24 said:
Think I'll give jasmine 5.0 a spin. I noticed there is a 5.0.11 changelog says disable the 10 and 1 minute ipv6 not sure if I should try it out or not :/ http://forum.xda-developers.com/showpost.php?p=59517503&postcount=2929
Click to expand...
Click to collapse
If you don't like the Edge > 3G > H+ > LTE, don't use 5.0.11, I'm on that, and it happens to me. I'm also Unlocked and on the T-Mobile network, just like you. It didn't happen to me at all before the IPv6 stuff started going into the Rom. And I also didn't have any sync issues.
jfsat said:
If you don't like the Edge > 3G > H+ > LTE, don't use 5.0.11, I'm on that, and it happens to me. I'm also Unlocked and on the T-Mobile network, just like you. It didn't happen to me at all before the IPv6 stuff started going into the Rom. And I also didn't have any sync issues.
Click to expand...
Click to collapse
Trying to get Jasmine 5.0 installed how didbu go about it? Looks like I can't the normal twrp flash way. I'm looking into it now.
SBAKER24 said:
Trying to get Jasmine 5.0 installed how didbu go about it? Looks like I can't the normal twrp flash way. I'm looking into it now.
Click to expand...
Click to collapse
You'll have to follow the steps from the 5.0 post. Extract the files to /sdcard/ and then do some shell commands in TWRP. Takes you out of your comfort zone a little, but it worked for me.
jfsat said:
You'll have to follow the steps from the 5.0 post. Extract the files to /sdcard/ and then do some shell commands in TWRP. Takes you out of your comfort zone a little, but it worked for me.
Click to expand...
Click to collapse
I just got it installed. It was a bit different but its up and running. Now i need to find the versions you said lol.
SBAKER24 said:
I just got it installed. It was a bit different but its up and running. Now i need to find the versions you said lol.
Click to expand...
Click to collapse
This one might be the one you're looking for. And you can install is in TWRP like any normal file
http://forum.xda-developers.com/showpost.php?p=59469705&postcount=2746
jfsat said:
This one might be the one you're looking for. And you can install is in TWRP like any normal file
http://forum.xda-developers.com/showpost.php?p=59469705&postcount=2746
Click to expand...
Click to collapse
Perfect!!! Thanks. I got it loaded up now i am getting all my data back up on the phone.
I just made a call and my LTE didn't drop and I was able to surf the internet while on the call so I think the official OTA is about to drop and they've activated the advanced calling features.
on prerooted .509 btw
I just gave mine a try on .485 and it dropped my LTE as soon as the call began. Can anyone else confirm that it is working on the alternate lollipop?
You can see the ongoing call in the status bar as well as the active LTE
BladeRunner said:
You can see the ongoing call in the status bar as well as the active LTE
Click to expand...
Click to collapse
Interesting. I have rooted .485, and want to keep root to get the same firmware as you. Is it a simple upgrade to the new software through TWRP recovery to jump from .485 to yours?
mpeclipse03 said:
Interesting. I have rooted .485, and want to keep root to get the same firmware as you. Is it a simple upgrade to the new software through TWRP recovery to jump from .485 to yours?
Click to expand...
Click to collapse
yes, you should be able to dirty flash it
BladeRunner said:
yes, you should be able to dirty flash it
Click to expand...
Click to collapse
By dirty flash you mean simply download the software zip onto the SD card similar to the first update?
mpeclipse03 said:
By dirty flash you mean simply download the software zip onto the SD card similar to the first update?
Click to expand...
Click to collapse
yes, just download the pre-rooted flashable and flash with recovery.
BladeRunner said:
yes, just download the pre-rooted flashable and flash with recovery.
Click to expand...
Click to collapse
Is there a link to the .509 download? I know it used to be on the Dev section, but I think the thread disappeared.
mpeclipse03 said:
Is there a link to the .509 download? I know it used to be on the Dev section, but I think the thread disappeared.
Click to expand...
Click to collapse
http://forum.xda-developers.com/z3/...ment/5-0-2-sony-xperia-z3v-prerooted-t3214182
I am on .509 and Advanced Calling is not activated. Been trying all morning to get it to work with no success.
dachao said:
I am on .509 and Advanced Calling is not activated. Been trying all morning to get it to work with no success.
Click to expand...
Click to collapse
was it active on your line before with another device? Mine was, and I suppose it could be location specific. Who knows for sure, but it is definitely working for me. Simultaneous voice/data and HD calling.
BladeRunner said:
was it active on your line before with another device? Mine was, and I suppose it could be location specific. Who knows for sure, but it is definitely working for me. Simultaneous voice/data and HD calling.
Click to expand...
Click to collapse
No, it wasn't active on my line before but we have over 40 phones on the business account and there is no way to activate it on our side of the account management.
Coworkers with the GS5/6 iPhones have advanced calling.
I can't seem to get it working either. Hmmm, I wonder if it is a regional thing or why one person can the feature over the others.
mpeclipse03 said:
I can't seem to get it working either. Hmmm, I wonder if it is a regional thing or why one person can the feature over the others.
Click to expand...
Click to collapse
I think unless you had it active already on a different device it won't work. I suspect they have activated it for testing prior to the lollipop update.
Again it's possible they've only activated it for testing it in limited areas.
BladeRunner said:
I think unless you had it active already on a different device it won't work. I suspect they have activated it for testing prior to the lollipop update.
Again it's possible they've only activated it for testing it in limited areas.
Click to expand...
Click to collapse
I have a note5 with it active on my current line and it the interesting thing, is that it shows up when you go into my MyVerizon account as an active feature. Could it be a SIM card issue that only certain ones are supported?
mpeclipse03 said:
I have a note5 with it active on my current line and it the interesting thing, is that it shows up when you go into my MyVerizon account as an active feature. Could it be a SIM card issue that only certain ones are supported?
Click to expand...
Click to collapse
I know it was showing as active for me on the .485 firmware last week, but wasn't working, so I don't think it is a SIM issue.
BladeRunner said:
I know it was showing as active for me on the .485 firmware last week, but wasn't working, so I don't think it is a SIM issue.
Click to expand...
Click to collapse
did this just start working for you or did you get it to activate. On my girlfriends druid turbo after you activate advanced calling it has a menu below where you can check video and voice do you have these options.
Tigerhoods said:
did this just start working for you or did you get it to activate. On my girlfriends druid turbo after you activate advanced calling it has a menu below where you can check video and voice do you have these options.
Click to expand...
Click to collapse
I flashed the. 509 firmware last night and tried the advanced calling this morning and it was just working. I have the advanced calling, HD and video toggles.
BladeRunner said:
I flashed the. 509 firmware last night and tried the advanced calling this morning and it was just working. I have the advanced calling, HD and video toggles.
Click to expand...
Click to collapse
Still nothing on .485. I have the option for advanced calling and when I hit it, it says to restart my phone in 5 minutes, but when I restart, there is no options available and it says I have to activate it again.