Related
while surfing huawei china forums I found this custom Rom (http://cn.club.vmall.com/thread-2182114-1-1.html)
Did any one tried it .. and if yes what is your feedback about it ?
I haven't tried his newest ROM B008, but I have tried several of his older modded ROM for the X1. Issue I have is that I can't get google play store or google services to work. I've tried varies version of goole play store and google service framework, but never could get it to work. Split view is nice...but it isn't automatic, you have to manually select the windows; not as good as Samsung implementation, but better than nothing.
Ahmed.ragab said:
while surfing huawei china forums I found this custom Rom (http://cn.club.vmall.com/thread-2182114-1-1.html)
Did any one tried it .. and if yes what is your feedback about it ?
Click to expand...
Click to collapse
it is sweet, i m using it, only 2 points to note before flashing it:
1) u need to be already on the official B008 rom (otherwise u will get the write to cust error)
2) the bootloader of your X1 must be already unlocked (if not u cannot flash via ADB)
for those using non china 4G sim, u may also get android.phone.com FC-ing during initial boot, no amt of wiping DATA or Cache (of phone itself or apps e.g. contacts, phone etc the usual sugg when u google the problem) will work, in this instance, simply switch to airplane mode, proceed to connect the X1 to your wifi and go abt dong all the updates via Huawei app store, i m not sure which update cured the problem, but when I switch off airplane mode after that, the FC disappears .. YMMV
---------- Post added at 05:17 AM ---------- Previous post was at 05:07 AM ----------
acuratlsfan said:
I haven't tried his newest ROM B008, but I have tried several of his older modded ROM for the X1. Issue I have is that I can't get google play store or google services to work. I've tried varies version of goole play store and google service framework, but never could get it to work. Split view is nice...but it isn't automatic, you have to manually select the windows; not as good as Samsung implementation, but better than nothing.
Click to expand...
Click to collapse
there is actually a very simple workaround for google services (other than google+, which there is another solution), and it doesnt involve 'hacking' or meddling with system files, rooting is not even needed (although KangVIP rom comes pre-rooted)
because even on china roms, Huawei has actually implemented the google framework within, all we need are the correct apps, simply launch the default Huawei Store (App Centre) and search for Google Play, GoogleCalendarSyncAdapter and GoogleContactsSynAdapter. After installation of Play, just launch it and install other Gapps u need from there.
Hi all,
Small point to note, somehow Google always translates the Chinese word "shua" literally as the verb "brush" but it actually means the verb "flash" in this context.
Note that translations of "shua ROM" will end up being "brush ROM" instead of "flash ROM".
FC ing with non china sim card
potatohead said:
it is sweet, i m using it, only 2 points to note before flashing it:
1) u need to be already on the official B008 rom (otherwise u will get the write to cust error)
2) the bootloader of your X1 must be already unlocked (if not u cannot flash via ADB)
for those using non china 4G sim, u may also get android.phone.com FC-ing during initial boot, no amt of wiping DATA or Cache (of phone itself or apps e.g. contacts, phone etc the usual sugg when u google the problem) will work, in this instance, simply switch to airplane mode, proceed to connect the X1 to your wifi and go abt dong all the updates via Huawei app store, i m not sure which update cured the problem, but when I switch off airplane mode after that, the FC disappears .. YMMV
Click to expand...
Click to collapse
this method is won't work for me.
even updated everything but my phone still get com.android.phone FC.
what can I do??
sampei said:
this method is won't work for me.
even updated everything but my phone still get com.android.phone FC.
what can I do??
Click to expand...
Click to collapse
Sorry, I really have no idea what I had done to result in the FCs disappearing. In fact, I wasnt expecting it to be.
My original intention was to play around with it and conduct some experimental tweaks since I was already on it before reflashing to get rid of the FCs.
One other thing that may have caused the FCs to go away is Xposed framework, you can try installing it.
The attached file below is an old version, install it then update to version 2.5.1 via the Xposed app; I also installed the App Settings module (version 1.8) for per app DPI setting. In fact, this is the tweak I wanted to try on EMUI 3.0 B008, it worked on EMUI 2.3 B010 and I was hoping for the same favorable result on EMUI 3.0. It did.
It was after the above that I re-enabled mobile/data and discovered to my surprise the FCs were gone.
YMMV.
Unfortunately I couldn't make it so I'm back to use EMUI 2.3 B010.
Thank you for suggest me some methods.
ps / I got sme results. with Australian Boost sim is worked but Japan Softbank and Singapore StarHub SIM is won't work.
@potatohead
Today I try fix again then suddenly your method is work for my phone. I carefully follow methods then work.
Thanks.
sampei said:
@potatohead
Today I try fix again then suddenly your method is work for my phone. I carefully follow methods then work.
Thanks.
Click to expand...
Click to collapse
can you tell me to do this step by step?
i don't understand chinese
thank u
Well anyone please upload that file on any other websites, I i have tried to download it with many ways but no way succeed
Edit : thank you all, I downloaded it by changing my IP with Psiphon app
1. Install KangVip rom.
2. then switch on airplane mode. (For stop to show phone FC )
3. Install above xposed for Huawei apk.
4. Update xposed to 2.5.1 ( version is very important any other versions are won't work )
5. Install xposed framework then reboot.
6. After rebooted, turn off airplane mode. FC IS GONE ALREADY.
Sent from my X1 7.0 using XDA Free mobile app
hopeless with this, always stop in the middle of download
anyone have another link?
Try it ! hopefully you can install.
http://dl-xda.xposed.info/modules/de.robv.android.xposed.installer_v29_665be7.apk
alexkarimovic21 said:
hopeless with this, always stop in the middle of download
anyone have another link?
Click to expand...
Click to collapse
if you are referring to problematic download of kangvip's mod, try this
http://www.mediafire.com/download/04izc31qkkl4d2q/X1-EMUI3.0-B008_img.rar
potatohead said:
if you are referring to problematic download of kangvip's mod, try this
thanks for the link, and done flashing but for me its feel laggy and the phone become so hot
i try to back to official B008 with flash update.app via sd card but not success, anyone have solution?
Click to expand...
Click to collapse
alexkarimovic21 said:
potatohead said:
if you are referring to problematic download of kangvip's mod, try this
thanks for the link, and done flashing but for me its feel laggy and the phone become so hot
i try to back to official B008 with flash update.app via sd card but not success, anyone have solution?
Click to expand...
Click to collapse
have u tried the 3-buttons method of flashing?
this method shd work for flashing of any full ROM
http://forum.xda-developers.com/showpost.php?p=58123000&postcount=25
Click to expand...
Click to collapse
potatohead said:
alexkarimovic21 said:
have u tried the 3-buttons method of flashing?
this method shd work for flashing of any full ROM
I did that method too but unsusccesfull, but after many reboot my phone start running well, now i use this ROM as a daily (without lockscreen)
thank you very much
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Hi Potoatohead, after I installed the Xposed apk, I couldn't install the framework. I just got a hang (4.4.2 Emui 3.0). Downloading the 2.5.1 update and trying to install that result in install failed. Any clues?
Hi guys. I recently install the LineageOS 15 ( on LG G4 ) and in the settings>securety>Smartlock the TrustedFace option in missing. I tried to install a magisk module and some zip file but never change. Someone have the solution ? Thank you
************************************************************************************************************************************
UPDATE ----> I FIX THE PROBLEM. Follow this steps:
1. Make sure you have the latest version of the Google app. (To get the latest version, go to the Google app page on the Play Store and tap Update).
2. Open the Google app .
3. At the bottom right, tap Menu Settings.
4. Tap Voice "Voice Match".
5. Disable "Voice Match".
6. Now you can see the Trustedface option in the SmartLock :laugh::good: !!!
seannolo24 said:
Hi guys. I recently install the LineageOS 15 ( on LG G4 ).........
Click to expand...
Click to collapse
I don't have this device and, since there's no Official LineageOS released for this device, I can only assume that you had installed an Unofficial one.
Without knowing which one you used, your best bet is to post this question within the following Unofficial LineageOS 15.1 thread that you had installed on your device for support and guidance.
https://forum.xda-developers.com/showthread.php?t=3782722
https://forum.xda-developers.com/showthread.php?t=3806615
https://forum.xda-developers.com/showthread.php?t=3806629
Good Luck!
~~~~~~~~~~~~~~~
UNLESS asked to do so, PLEASE don't PM me regarding support. Sent using The ClaRetoX Forum App on my SM-G900V device.
I've made a Flashable zip that enables the trusted face option inside smart lock, I've linked it here
I tried it on Pie and its working just fine, Feel fry to try it for yourself and PM me if you get any problems.
Also You don't have to be rooted for this to work.
You can try this https://androidfilehost.com/?fid=11410963190603909998 flash it with magisk and simply reboot your device.
its crashing
GreatLifehacker said:
I've created a Flashable Zip that enables the trusted face option inside smart lock, I've linked it here
I've checked it on Pie, Feel fry to try it for yourself and PM me if you get any problems.
Click to expand...
Click to collapse
Just flash this one, you don't need root for this to work.
I flashed the zip, it did unlock the face unlock but it's not working. The camera's infrared lights up but it shuts down quickly and doesn't unlock.
Never mind it works, but it needs a swipe to unlock, I ll see if that's a ROM specific thing, doesn't seem to have an option that toggles it either.
Deleted
iDifferent said:
I flashed the zip, it did unlock the face unlock but it's not working. The camera's infrared lights up but it shuts down quickly and doesn't unlock.
Never mind it works, but it needs a swipe to unlock, I ll see if that's a ROM specific thing, doesn't seem to have an option that toggles it either.
Click to expand...
Click to collapse
Where does the setting appear after flashing the zip? It's not under settings, security, smart lock with trusted devices etc.
CessnaBroon said:
Where does the setting appear after flashing the zip? It's not under settings, security, smart lock with trusted devices etc.
Click to expand...
Click to collapse
Just realised the problem. Is there a version of the zip for devices running Nougat?
Edit: disregard, wrong thread lol woops.
Check "change log" in the attachment.
Security patch is still from april.
OTA package V10.2.24.0.PFAEUXM to V10.2.26.0.PFAEUXM
FULL V10.2.26.0.PFAEUXM
Great. But notifications are still not fixed...
Randomly openning of apps while locked not fixed on this update. I wonder when will xiaomi fix it
Alarm dont appear on the lockscreen, you need to unlock your phone and disale it via the notification or by launching the app....
Gokh said:
Alarm dont appear on the lockscreen, you need to unlock your phone and disale it via the notification or by launching the app....
Click to expand...
Click to collapse
No one have this problem?
Try EU 9.6.5
Abaddon said:
Try EU 9.6.5
Click to expand...
Click to collapse
I've tried EU miui from about 3 weeks ago, ROS from 2 weeks ago and since them am on mi-globe 9.5.30.
All ROMs were clean flashes from TWRP.
I formatted the device, made as clean an install as possible, my phone is decrypted, I am rooted with magisk 19.2 and I reinstalled everything from scratch.
Yet I am still having rare, but annoying 'whatsapp keeps crashing' errors,followed by a WhatsApp restart with many messages appearing in delay. I have WhatsApp locked, disabled miui optimization on it, tried all the tricks, and nothing...
This is something that has happened under eu miui and ROS as well and I have no idea why this is happening and how I can fix it.
Are you using Whatsapp with the new eu MIUI you suggested?
crazybill said:
I've tried EU miui from about 3 weeks ago, ROS from 2 weeks ago and since them am on mi-globe 9.5.30.
All ROMs were clean flashes from TWRP.
I formatted the device, made as clean an install as possible, my phone is decrypted, I am rooted with magisk 19.2 and I reinstalled everything from scratch.
Yet I am still having rare, but annoying 'whatsapp keeps crashing' errors,followed by a WhatsApp restart with many messages appearing in delay. I have WhatsApp locked, disabled miui optimization on it, tried all the tricks, and nothing...
This is something that has happened under eu miui and ROS as well and I have no idea why this is happening and how I can fix it.
Are you using Whatsapp with the new eu MIUI you suggested?
Click to expand...
Click to collapse
Have you tried fixing SELinux contexts in TWRP advanced section?
---------- Post added at 04:20 PM ---------- Previous post was at 04:19 PM ----------
raystef66 said:
OTA package V10.2.24.0.PFAEUXM to V10.2.26.0.PFAEUXM
FULL V10.2.26.0.PFAEUXM
Click to expand...
Click to collapse
Thank you SO MUCH for the links. I can't download the ETA since I'm rooted, so flashing the full rom on twrp did update :highfive:
RedWave31 said:
Have you tried fixing SELinux contexts in TWRP advanced section?
---------- Post added at 04:20 PM ---------- Previous post was at 04:19 PM ----------
Click to expand...
Click to collapse
No, I never even knew about SELinux before. Is this something I do for a specific app (in my case WhatsApp) or is it something preventive I should do before/while reflashing and reinstalling everything again?
crazybill said:
No, I never even knew about SELinux before. Is this something I do for a specific app (in my case WhatsApp) or is it something preventive I should do before/while reflashing and reinstalling everything again?
Click to expand...
Click to collapse
I solved the problem. It seems I manually select led a silence.ogg file for silencing the group notifications and it caused some sort of problem. Changing this to thebuilt in None option solved it completely.
This was the error log from which I realized the source of the error:
java.lang.SecurityException: UID 10139 does not have permission to content://com.android.fileexplorer.myprovider/external_files/Download/Silence.ogg [user 0]
at android.os.Parcel.createException(Unknown Source:36)
at android.os.Parcel.readException(Unknown Source:11)
at android.os.Parcel.readException(Unknown Source:10)
at android.app.INotificationManager$Stub$Proxy.enqueueNotificationWithTag(Unknown Source:48)
at android.app.NotificationManager.notifyAsUser(Unknown Source:167)
at android.app.NotificationManager.notify(Unknown Source:6)
at c.f.a.v.a15358)
at d.f.r.l.a139977)
at d.f.W.ca.a103901)
at d.f.W.ca.run104313)
at android.os.Handler.handleCallback(Unknown Source:2)
at android.os.Handler.dispatchMessage(Unknown Source:4)
at android.os.Looper.loop(Unknown Source:208)
at android.os.HandlerThread.run(Unknown Source:28)
Caused by: android.os.RemoteException: Remote stack trace:
at com.android.server.am.ActivityManagerService.checkGrantUriPermissionLocked(Unknown Source:549)
at com.android.server.am.ActivityManagerService.checkGrantUriPermission(Unknown Source:20)
at com.android.server.notification.NotificationRecord.visitGrantableUri(Unknown Source:49)
at com.android.server.notification.NotificationRecord.calculateGrantableUris(Unknown Source:39)
at com.android.server.notification.NotificationRecord.<init>(Unknown Source:134)
FULL V10.2.27.0
OTA V10.2.26.0 -> V10.2.27.0
Details on 27 attached. June patch.
nupi said:
Details on 27 attached. June patch.
Click to expand...
Click to collapse
I hope this fixes the lost data bug I've been experiencing, where you lose signal and when you regain it no data passes until you reboot or toggle data.
The software of this phone is terrible, i will never buy Xiaomi phone again ! From the beginning and even after updates i still have theses problems :
- No notifications on status bar, i must check notifications every time manually.
- When battery is low, i don't receive notifications, i checked and disabled all the power saving options but no luck.
- When phone switch from wifi to data, there's no internet i must switch data on/off every time.
- I must take the phone on my hand to get fingerprint detected.
What the hell are you doing Xiaomi !
ama212 said:
The software of this phone is terrible, i will never buy Xiaomi phone again ! From the beginning and even after updates i still have theses problems :
- No notifications on status bar, i must check notifications every time manually.
- When battery is low, i don't receive notifications, i checked and disabled all the power saving options but no luck.
- When phone switch from wifi to data, there's no internet i must switch data on/off every time.
- I must take the phone on my hand to get fingerprint detected.
What the hell are you doing Xiaomi !
Click to expand...
Click to collapse
Why are your even complaining here like if Xiaomi will come and read your comment.
PriPhaze said:
Why are your even complaining here like if Xiaomi will come and read your comment.
Click to expand...
Click to collapse
I did find the disappearing notifications EXTREMELY annoying myself.
I only don't have that issue now because I unlocked bootloader and installed a custom ROM. Something I shouldn't have to do.
Also, they really should have built in a sort of pocket mode for the fingerprint sensor. That's how they did it with the Mate 20 Pro (how it should be!!)
switch to global beta. it's as stable as it gets. no issues with notifications and whatnot. im on 9.6.27 and super happy with the experience. no bootloader unlock needed either
kennycoder said:
switch to global beta. it's as stable as it gets. no issues with notifications and whatnot. im on 9.6.27 and super happy with the experience. no bootloader unlock needed either
Click to expand...
Click to collapse
I thought bootloader had to be unlocked for that... so how do I install the global beta again?
I couldn't find it...maybe I just overlooked it...
ama212 said:
The software of this phone is terrible, i will never buy Xiaomi phone again ! From the beginning and even after updates i still have theses problems :
- No notifications on status bar, i must check notifications every time manually.
- When battery is low, i don't receive notifications, i checked and disabled all the power saving options but no luck.
- When phone switch from wifi to data, there's no internet i must switch data on/off every time.
- I must take the phone on my hand to get fingerprint detected.
What the hell are you doing Xiaomi !
Click to expand...
Click to collapse
Flash Global Developer 9.6.27 for a better experience on Mi9, if you want to remain on an official rom, or choose ROS, xiaomi eu, PE.
---------- Post added at 08:02 AM ---------- Previous post was at 08:00 AM ----------
MasterThiefGarrett said:
I thought bootloader had to be unlocked for that... so how do I install the global beta again?
I couldn't find it...maybe I just overlooked it...
Click to expand...
Click to collapse
If you come from EEA you have to install Global Stable for first using xiaomitool v2 (search it in Google), then you can install Global Beta through updater, directly on phone. No bootloader unlock needed in this way
Hello Xda and K20 Pro-ians.
Just wanted to share with you what I did after accidentally selected “ clean all and lock” options during the process of putting in K20 Pro India ROM (raphaelin) 10.3.3 into my K20 Pro which was running on China (raphael) 10.3.14.
Started reading the forum and somehow TEST POINT Reset was my last option as I can’t boot into the ROM and was at the Recovery screen, Tried EDL as well still no go
I read through some post, and one of the members mentioned about using an older version of Unlocking application. Immediately, I tried all possible version that I could find and so far version “miflash_unlock-en-2.2.406.5” did the unlocking and straight went into the newly installed India ROM(raphaelin).
FYI. the latest version of MiUNlock doesn’t permit you to unlock bootloader process for another 30days (Mi Policies)
Steps Taken
1. Got my New Phone ( China Rom ) updated to version 10.3.14
2. Read through the post in XDA and begin ripping off my warranty -> Downloaded India Rom 10.3.3
3. Unlock Bootloader (waited for three days) -> starts flashing -> With Clean all and Lock option being checked! - FML!
4. Tried to unlock again with Miflash version 3~ no go
5. Install MiFlash unlock 2.2.4
6. Booth into Fastboot. Run the app and waited for 6 to 8 minute for the unlocking process.
7. Phone restarted
8. Happy days!
If the post help, just buy me a beer
bitcoin = 38s3pyXL4yS47JNZRxRYiRZkGypUwrjusz
Ether = 0xB2e0f140b8d1704Db8BEdaB2D812D07bC33Bf5c5
to download MiFlash Unlock version 2.2.4 simply google it
Thank you, I am sure this will help many people.
Here is the download link for miflash 2.2.406.5: https://androidfilehost.com/?fid=889764386195901972
Thanks !
Legend! I tried putting the link in however due to the infancy of my user account, I am not allowed to do so
thank you again!
After installing 10.3.3 indian rom to your chinese K20 pro, does it automatically change to L1 security policy and your able to watch netflix in HDR?
Jumundz said:
Hello Xda and K20 Pro-ians.
Just wanted to share with you what I did after accidentally selected “ clean all and lock” options during the process of putting in K20 Pro India ROM (raphaelin) 10.3.3 into my K20 Pro which was running on China (raphael) 10.3.14.
Started reading the forum and somehow TEST POINT Reset was my last option as I can’t boot into the ROM and was at the Recovery screen, Tried EDL as well still no go
I read through some post, and one of the members mentioned about using an older version of Unlocking application. Immediately, I tried all possible version that I could find and so far version “miflash_unlock-en-2.2.406.5” did the unlocking and straight went into the newly installed India ROM(raphaelin).
FYI. the latest version of MiUNlock doesn’t permit you to unlock bootloader process for another 30days (Mi Policies)
Steps Taken
1. Got my New Phone ( China Rom ) updated to version 10.3.14
2. Read through the post in XDA and begin ripping off my warranty -> Downloaded India Rom 10.3.3
3. Unlock Bootloader (waited for three days) -> starts flashing -> With Clean all and Lock option being checked! - FML!
4. Tried to unlock again with Miflash version 3~ no go
5. Install MiFlash unlock 2.2.4
6. Booth into Fastboot. Run the app and waited for 6 to 8 minute for the unlocking process.
7. Phone restarted
8. Happy days!
If the post help, just buy me a beer
bitcoin = 38s3pyXL4yS47JNZRxRYiRZkGypUwrjusz
Ether = 0xB2e0f140b8d1704Db8BEdaB2D812D07bC33Bf5c5
to download MiFlash Unlock version 2.2.4 simply google it
Click to expand...
Click to collapse
So with this version no need to use test point?
overcustom said:
So with this version no need to use test point?
Click to expand...
Click to collapse
Apparently that's the claim. I don't imagine there's going to be many volunteers to deliberately brick their phone just to try this out.
We'll have to wait for the next person whose too impatient to fully read the guides and accidentally bricks the phone, before we can get any validation.
Robbo.5000 said:
Apparently that's the claim. I don't imagine there's going to be many volunteers to deliberately brick their phone just to try this out.
We'll have to wait for the next person whose too impatient to fully read the guides and accidentally bricks the phone, before we can get any validation.
Click to expand...
Click to collapse
Hi Zadjalixx, unfortunately, is still L3, xiao mi need to up their game for this ~ I didn't root or load any custom recovery like TWARP into this phone YET. My initial Idea is the review the phone so I can use it for my daily drive. Also I can't see Netflix in PLaystore, ( so is a bummer for sure ). you have any alternative that could suggest? thanks mate.
overcustom said:
So with this version no need to use test point?
Click to expand...
Click to collapse
Yeah , so far that works for me , I have given up at 1st and ready to make use of the hairdryer to remove the back cover to perform the test point reset.
I read through some treads which I am having issues to trace back, by using an older version of miflash unlock we can unlock the phone without the wait for another 30days.
Like Robo says we need to wait for the next victim to do so ~ I should have recorded a video during that process. Cheers ~
Jumundz said:
Hello Xda and K20 Pro-ians.
Just wanted to share with you what I did after accidentally selected “ clean all and lock” options during the process of putting in K20 Pro India ROM (raphaelin) 10.3.3 into my K20 Pro which was running on China (raphael) 10.3.14.
Started reading the forum and somehow TEST POINT Reset was my last option as I can’t boot into the ROM and was at the Recovery screen, Tried EDL as well still no go
I read through some post, and one of the members mentioned about using an older version of Unlocking application. Immediately, I tried all possible version that I could find and so far version “miflash_unlock-en-2.2.406.5” did the unlocking and straight went into the newly installed India ROM(raphaelin).
FYI. the latest version of MiUNlock doesn’t permit you to unlock bootloader process for another 30days (Mi Policies)
Steps Taken
1. Got my New Phone ( China Rom ) updated to version 10.3.14
2. Read through the post in XDA and begin ripping off my warranty -> Downloaded India Rom 10.3.3
3. Unlock Bootloader (waited for three days) -> starts flashing -> With Clean all and Lock option being checked! - FML!
4. Tried to unlock again with Miflash version 3~ no go
5. Install MiFlash unlock 2.2.4
6. Booth into Fastboot. Run the app and waited for 6 to 8 minute for the unlocking process.
7. Phone restarted
8. Happy days!
If the post help, just buy me a beer
bitcoin = 38s3pyXL4yS47JNZRxRYiRZkGypUwrjusz
Ether = 0xB2e0f140b8d1704Db8BEdaB2D812D07bC33Bf5c5
to download MiFlash Unlock version 2.2.4 simply google it
Click to expand...
Click to collapse
Same scenario here! But different method...
I did waited days to change month then re apply unlocking bootloader using updated miunlock tool.
'Twas successfull!:laugh:
Running now on 10.3.3 raphaelin for 2 weeks!
Cheers!
About Netflix, you can download the APK on apkmirror: https://www.apkmirror.com/apk/netfl...oid-tv-6-2-5-build-2789-android-apk-download/
DontDamnMe said:
About Netflix, you can download the APK on apkmirror: https://www.apkmirror.com/apk/netfl...oid-tv-6-2-5-build-2789-android-apk-download/
Click to expand...
Click to collapse
I don't think this will work . due to teh security level , It needs to have L1 rather then L3 to use Netflix service.
I also made the same mistake. I tried to unlock with newest and older unlock tool, but it failed. It is showing to go and check unlock status from the developer option. My device can't boot then how can to developer option?? Please suggest me what should I do. Thanks in advance
Nachiketa.jstu said:
I also made the same mistake. I tried to unlock with newest and older unlock tool, but it failed. It is showing to go and check unlock status from the developer option. My device can't boot then how can to developer option?? Please suggest me what should I do. Thanks in advance
Click to expand...
Click to collapse
you need to download the chinese or indian fastboot rom and install it trough mi flash tool, then once the rom is installed again, you can go into the menu to enable bootloader unlock. Then you probably have to wait a week until you can unlock it using the xiaomi unlock tool.
---------- Post added at 02:23 PM ---------- Previous post was at 01:44 PM ----------
Everytime I use the latest unlocker tool my phone won't boot to OS anymore and the stock recovery boots up. I have to do a factory reset and then i have to apply for the bootloader to unlock again.
Is there an option to see the unlock time without needing to reset the phone?
dev-DaT said:
you need to download the chinese or indian fastboot rom and install it trough mi flash tool, then once the rom is installed again, you can go into the menu to enable bootloader unlock. Then you probably have to wait a week until you can unlock it using the xiaomi unlock tool.
---------- Post added at 02:23 PM ---------- Previous post was at 01:44 PM ----------
Everytime I use the latest unlocker tool my phone won't boot to OS anymore and the stock recovery boots up. I have to do a factory reset and then i have to apply for the bootloader to unlock again.
Is there an option to see the unlock time without needing to reset the phone?
Click to expand...
Click to collapse
Yeap I MR Dev-T is right did the same ~ it should get your phone runnign in no time. Good luck
Jumundz said:
Yeap I MR Dev-T is right did the same ~ it should get your phone runnign in no time. Good luck
Click to expand...
Click to collapse
How is this correct? While Installing India rom, the bootoader got locked and you’re stuck at the Recovery menu. How Can you Enable Developer Options to bind the ID again when the device doesn’t boot?
Are you saying post the lockout, you booted immediately into fastboot and used the Mi Unlock?
dev-DaT said:
you need to download the chinese or indian fastboot rom and install it trough mi flash tool, then once the rom is installed again, you can go into the menu to enable bootloader unlock. Then you probably have to wait a week until you can unlock it using the xiaomi unlock tool.
---------- Post added at 02:23 PM ---------- Previous post was at 01:44 PM ----------
Everytime I use the latest unlocker tool my phone won't boot to OS anymore and the stock recovery boots up. I have to do a factory reset and then i have to apply for the bootloader to unlock again.
Is there an option to see the unlock time without needing to reset the phone?
Click to expand...
Click to collapse
Nachiketa.jstu said:
I also made the same mistake. I tried to unlock with newest and older unlock tool, but it failed. It is showing to go and check unlock status from the developer option. My device can't boot then how can to developer option?? Please suggest me what should I do. Thanks in advance
Click to expand...
Click to collapse
Hi Mate, you tired using MiFlash unlock 2.2.4 as well ? Does it work. Basically once i Login to using my MI account and I leave the application run for few minutes and then I am able unlock the bootloader.
Most important step is that you need to put your phone to fastboot then unlock using older version -> then you should be able to boot into your ROM then from there you can enter the developer mode. But initially you should have your phone unlock(boot loader 1st right)
hope it works.
You need to boot your phone into fastboot. in order for the application to work.
Recovery menu ( Original Recovery from Mi / I have yet to load custom recovery like TWRP )
you could restart the phone and boot into fastboot even you are in the original recovery menu. Not sure if that makes sense.
thanks
My problem
Jumundz said:
You need to boot your phone into fastboot. in order for the application to work.
Recovery menu ( Original Recovery from Mi / I have yet to load custom recovery like TWRP )
you could restart the phone and boot into fastboot even you are in the original recovery menu. Not sure if that makes sense.
thanks
Click to expand...
Click to collapse
This is a problem, when trying to pass the Chinese rom with the bootloader unlocked, the phone neither turns on nor fastboot mode and is only recognized via edl, have any idea what I can do?
I can't post external link. If you search on YouTube K20Pro EDL recovery you will get the video , that that is what you looking for.
The application only works if you are in fastboot mode. Thx and good luck
Sent from my Redmi K20 Pro using Tapatalk
kinraraland said:
I can't post external link. If you search on YouTube K20Pro EDL recovery you will get the video , that that is what you looking for.
The application only works if you are in fastboot mode. Thx and good luck
Sent from my Redmi K20 Pro using Tapatalk
Click to expand...
Click to collapse
thank you very much, do you know which channel talks about this?
Jumundz said:
Hello Xda and K20 Pro-ians.
Just wanted to share with you what I did after accidentally selected “ clean all and lock” options during the process of putting in K20 Pro India ROM (raphaelin) 10.3.3 into my K20 Pro which was running on China (raphael) 10.3.14.
Started reading the forum and somehow TEST POINT Reset was my last option as I can’t boot into the ROM and was at the Recovery screen, Tried EDL as well still no go
I read through some post, and one of the members mentioned about using an older version of Unlocking application. Immediately, I tried all possible version that I could find and so far version “miflash_unlock-en-2.2.406.5” did the unlocking and straight went into the newly installed India ROM(raphaelin).
FYI. the latest version of MiUNlock doesn’t permit you to unlock bootloader process for another 30days (Mi Policies)
Steps Taken
1. Got my New Phone ( China Rom ) updated to version 10.3.14
2. Read through the post in XDA and begin ripping off my warranty -> Downloaded India Rom 10.3.3
3. Unlock Bootloader (waited for three days) -> starts flashing -> With Clean all and Lock option being checked! - FML!
4. Tried to unlock again with Miflash version 3~ no go
5. Install MiFlash unlock 2.2.4
6. Booth into Fastboot. Run the app and waited for 6 to 8 minute for the unlocking process.
7. Phone restarted
8. Happy days!
If the post help, just buy me a beer
bitcoin = 38s3pyXL4yS47JNZRxRYiRZkGypUwrjusz
Ether = 0xB2e0f140b8d1704Db8BEdaB2D812D07bC33Bf5c5
to download MiFlash Unlock version 2.2.4 simply google it
Click to expand...
Click to collapse
Hello, thanks for providing good information.
I am planning to flash my MI 9T PRO tonight to the latest India Rom.
Are you receiving the regular official updates after flashing ?
Does this mean that , i cannot use Clean All and Lock option while flashing ? What if i want to lock the phone after flashing because i will not doing this kind of stuff again after flashing.
Thanks
Dear All , this method maybe already here somewhere ,
i have tried to root this specific device and i ran into many issues !
but successfully i have done it .
i'll upload the patched file here and i'll mention what method i have done ! ..
unlock boot loader is a must . ( Please read about it in google , All Samsung devices is the same method )
u might repeat the process to times until it successfully unlocked and greyed-out !
Next download this firmware only to be able to run the patched AP .
un-tick Auto-reboot before flashing .
once flash done , power + Volume down to restart , then volume up with power until u boot into the recovery
wipe data . restart . done
to make sure u have done every thing correctly u'll see RED massage once u boot you're device
Firmware ( This is UAE Firmware " T725XXS1ATC5_T725OJM1ASJ3_XSG " ) All Languages included . Link
Patched AP File Link
Please Note that i'm not responsible if u break your Tablet ! .
Proof ( IMG )
GD day :angel:
after rooting is it possible to update firmware to a new one?
moresat said:
after rooting is it possible to update firmware to a new one?
Click to expand...
Click to collapse
No ! ..
Hi
Do I just need to use odin to flash the Firmware you mentioned then use ODIN again to flash the patched ap
I can just add that with this specific fw version and patched ap everything worked on LTE version but I might add my little deviations ...
1st original firmware flash (BL,AP,CP,CSC-non-home one) instantly followed by wipe data in recovery mode.
2nd After the initial setup + wifi connection I installed and updated magisk.
3rd "adb restart bootloader" (here i am not sure if it mattered but anyway) and flush again with the provided Patched AP File (BL,the_patched_AP,CSC - the home one this time ... using CP failed with modem err with me so I just skipped it here)
4th get trough the init setup again with wifi on and open magisk which will install more stuff.
The prerequisites still apply oem unlocked bootloader before you start and keep your battery at least 60-70% since the process drained mine a lot.
You know you are on the right track when you have warning with tablet bootloader is unlocked (at startup yellow) and tablet not running Samsung's official software (red after the first one)
Ive just bought this SM-T725 model android 11. There is no sign of OEM Unlock Bootloader under development. Does anyone know how I can unlock this.
chadandchew said:
Ive just bought this SM-T725 model android 11. There is no sign of OEM Unlock Bootloader under development. Does anyone know how I can unlock this.
Click to expand...
Click to collapse
The option only shows up when you are connected to the internet.
Thanks for reply mate, I got it figured. I also manage to get root and twrp recovery but not both at the same time. After flashing and using twrp recovery I then lose root after reboot and have to flash a patched magisk bundle over odin again. Bit inconvenient but I only intend using twrp now and then for backup/recovery.
Can you recommend a stable rom for this device - far too much google bloat on it for my liking. I tried latest lineage but found it unstable.
chadandchew said:
Thanks for reply mate, I got it figured. I also manage to get root and twrp recovery but not both at the same time. After flashing and using twrp recovery I then lose root after reboot and have to flash a patched magisk bundle over odin again. Bit inconvenient but I only intend using twrp now and then for backup/recovery.
Can you recommend a stable rom for this device - far too much google bloat on it for my liking. I tried latest lineage but found it unstable.
Click to expand...
Click to collapse
Just install LineageOS. Clean, no Bloat, everything smooth and you can have TWRP and Root/Magisk at the same time.
Depending on how much Google you want to have on your device, you might rather choose LOS+MG ( https://lineage.microg.org/) I can highly recommend it. You get rid of Google which debloats it even more and is a plus for your privacy but almost everything works (at leat for me. But migh depend on your needs)
If you like Google, just use normal LineageOS (https://lineageos.org) + GAPPS
Thanks for reply. Will try the LOS ROM later. Wish Google crap would disappear totally. I hate it enormously.
By the way which folder am I looking for on that LOS ROM download page
Ah gts4lv I presume
chadandchew said:
Wish Google crap would disappear totally. I hate it enormously.
Click to expand...
Click to collapse
then go for LOS+MG: https://download.lineage.microg.org/gts4lv/
topaza said:
then go for LOS+MG: https://download.lineage.microg.org/gts4lv/
Click to expand...
Click to collapse
Recently switched to using MicroG Lineage. Timely enough, MicroG passes the SafetyNet now as per the instructions mentioned below and indicated in the attached screenshot. For the fingerprint, I had selected the T720 from the list.
https://www.reddit.com/r/MicroG/comments/shmpng
Along with Aurora store installed as a service, I think you don't need Google anymore.
topaza said:
Just install LineageOS. Clean, no Bloat, everything smooth and you can have TWRP and Root/Magisk at the same time.
Depending on how much Google you want to have on your device, you might rather choose LOS+MG ( https://lineage.microg.org/) I can highly recommend it. You get rid of Google which debloats it even more and is a plus for your privacy but almost everything works (at leat for me. But migh depend on your needs)
If you like Google, just use normal LineageOS (https://lineageos.org) + GAPPS
Click to expand...
Click to collapse
I'm having some problem here:
I can install LineageOS, I can root/Magisk, I can have TWRP, but not all together at once.
Can you help me on how to do this?
Working on a SM-T725 of course, actually rooted, lineage and TWRP installed, but my Magisk can't install modules, it seems it doens't have root privileges.
Thanks in advance for your answer
anybody have an updated one, the file has been archived on the said link... thanks in advance