Convert Redmi Note 3 into htc 10 - Xiaomi Redmi Note 3 Themes, Apps, and Mods

Converting Redmi Note 3 into htc 10-
Disclaimer-
Code:
Follow the steps correctly otherwise you may brick your device. We are not responsible for any damage to your phone.
It will erase all your data, so we advise you first to take a complete backup of your phone and then proceed.
Ensure that your phone has at least 50-60% charged to prevent the accidental shutdown in-between the process.
hit thanks if this helpful For You
Whats working-
Everything-
htc camera
htc gallery
htc launcher
htc internet
htc music
htc widget
htc video
htc file manager
hotspot widget
htc location service
weather[not work]
Note- You can install and update all apps from play store, because it detect your Device as htc10 or m9[ according build prop values]
Requirements-
A Rooted Device with cm or cm based Rom installed
custom Recovery
200MB free space in system
always Step by Step Bcz i am a Blogger too-
1. htc apps installation-
First of all Download htc apps From bellow
Put Downloaded Zip into Root of sd card
Reboot Device into recovery[twrp]
Clear catch , dalvik catch
on Recovery Click on install zip from sd card Navigate Downloaded htc apps zip file
Confirm install, wait for success
Go back and reboot System Now,
2. Flashing htc framework, htc Camera, htc gallery-
Download htc Zip file From Bellow and transfer into Device storage/-internal/external
reboot into recovery [twrp]
Clear catch Dalvik catch,
on Recovery Click on install zip from SD card
Navigate Downloaded htc Zip file and Confirm install, wait for success
Go back/ reboot system Now Done,
3. Flashing Boot logo-
Download htc Boot Logo For Redmi Note 3 From below
and paste in adb folder
open cmd on adb folder
Connect your phone to pc via usb with usb debugging enabled
type adb reboot bootloader to boot device into fastboot mod,
then type fastboot flash splash htcsplash.img to flash splash img
Done type fastboot reboot
4. Flashing Bootanimation-
Download htc Bootanimation from Bellow
Run Root explorer and Replace stock boot animation in system/media folder
set permission
Done,
5. Changing build prop values-
Go to system folder and edit build.prop file
replace values like this
For htc 10-
ro.product.model=MSM8996 for arm64
ro.product.brand=htc
ro.product.name=pmewl_00531
ro.product.device=htc_pmewl
ro.product.board=msm8996
ro.product.manufacturer=htc
for htc M9-
ro.product.device=htc_himauhl
ro.product.name=himauhl_htc_europe
ro.product.manufacturer=htc
ro.product.model=HTC One M9
ro.product.brand=htc
6. Changing Imei-
Install xposed framework according your Device
Download install and enable this module [xposed imei changer] from xposed/module
reboot Device
run xposed imei Changer and replace origenal imei by htc m10 imei[we can't offer this]
Done,
7. Changing UI-
Download and Install this Theme[sense ui] From bellow
Run theme manager and apply sense ui theme
Done reboot Phone,
8. Done-
Downloads-
All Files
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

XN Logos said:
Converting Redmi Note 3 into htc 10-
Disclaimer-
Code:
Follow the steps correctly otherwise you may brick your device. We are not responsible for any damage to your phone.
It will erase all your data, so we advise you first to take a complete backup of your phone and then proceed.
Ensure that your phone has at least 50-60% charged to prevent the accidental shutdown in-between the process.
hit thanks if this helpful For You
Whats working-
Everything-
update-
Theme Now Working, You can Use Different Color for Binkfeed up to 30 Color available which is work for all htc app,
Photo Editor Now working, update gallery app from play store,
Weather now Working, update app From play store, Don't update other apps otherwise it cause force Close,
message App working, Direct use From play Store,
Click to expand...
Click to collapse

Related

[Q] u8800 pro not booting

Hello to all.
I need help with my friends u8800 pro.
I have an u8800 and successfully rooted and running oxygen till now fine.
I tried the same procedure on u8800pro unfortunately it failed (probably rooting was not done)
Tried also installing other ROMs (now for u8800pro)
Actual status of the u8800pro is now
1. ClockworkMod 5.5.0.4 is in the "Image" folder
2. instalation of 20120107-cm-7.1.0-u8800pro-Geno-en.zip was done (without errors)
3. on normal boot/power on it stuck on huawei logo
4. but: by entering USB it starts in charging mode (battery on the screen) and no problem reaching Image folder or booting in CWM
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Of course I have an backup (used ClockworkMod 5.5.0.4), but when I tried to recover it did not worked =without changes -booting stuck on first screen "huawei"
So pleas, If somebody know how to help me both getting back to recover or go forward to flash something good pleas let me Know.
I will be happy about any idea or procedure.
Jan
FIXED
UFF I fixed it! : )
Happy as little child, than more its not mine phone.
If this happen to anybody.
1. pink screen
2. copy over backedup boot.img or/and recovery.img (if you were using other/modified recovery or boot soft as me)
3. download actual soft from manufacturer for example huawei
4. follow the steps packed inside distributed kernel
5. in this case -create "dload" folder in root of SD. put first uprade file "UPDATE.APP" inside. Boot with all buttons pushed (as pink screen) update will start. In step 2 put the other update to the same folder but rename the second file to "UPDATE_g.APP" and repeat as first step (as pink screen) update will continue.
6. power on normally (I did it WITHOUT SD)
7. should run, by patient, it take some time to sett up fresh soft.
8. there is also step 3 if you want to use chines. Putt step 3 file in the dload folder. Start phone normally. Go to phone settings, sd card, software upgrade and follow the steps asked.
I used for this "U8800Pro V100R001C00B540G001 (Universal) (Gingerbread)"
Jan
noob_jan said:
UFF I fixed it! : )
Happy as little child, than more its not mine phone.
If this happen to anybody.
1. pink screen
2. copy over backedup boot.img or/and recovery.img (if you were using other/modified recovery or boot soft as me)
3. download actual soft from manufacturer for example huawei
4. follow the steps packed inside distributed kernel
5. in this case -create "dload" folder in root of SD. put first uprade file "UPDATE.APP" inside. Boot with all buttons pushed (as pink screen) update will start. In step 2 put the other update to the same folder but rename the second file to "UPDATE_g.APP" and repeat as first step (as pink screen) update will continue.
6. power on normally (I did it WITHOUT SD)
7. should run, by patient, it take some time to sett up fresh soft.
8. there is also step 3 if you want to use chines. Putt step 3 file in the dload folder. Start phone normally. Go to phone settings, sd card, software upgrade and follow the steps asked.
I used for this "U8800Pro V100R001C00B540G001 (Universal) (Gingerbread)"
Jan
Click to expand...
Click to collapse
can you provide the files and the update process in a more easy way brother

3/4/15 NEW HOWTO ROOT & install TWRP on DL701Q/DigiLand 7" Tablet 4.4.2 KitKat

3/4/15 NEW HOWTO ROOT & install TWRP on DL701Q/DigiLand 7" Tablet 4.4.2 KitKat
Ok, So you got your new Super Cheapo MTK8127 quad core Tablet from BestBuy or some other overpriced electronics emporium and want to install root and a custom recovery So it won't suck nearly as bad
Feeling hungry but don't wanna feed yourself??? Open wide......Here comes the airplane requesting permission to land
The Following procedure may "BRICK" your tablet and wipe your porn....You do so at your own risk, Neither Kneee or his lawyer claim to know ANYTHING about android....or anything else for that matter
THIS GUIDE WILL WIPE YOUR PORN!!!
If you've ever seen THIS:http://forum.xda-developers.com/chef-central/android/root-dl701q-install-twrp-touch-recovery-t2980339thread, You know that "iRoot/vRoot no longer works since updating to kitkat. I've BUNGLED my way into a solution, Hope it helps you too.....
THIS GUIDE ASSUMES YOU KNOW HOW TO USE ADB AND FASTBOOT (ENABLE USB DEBUGGING)OR AT LEAST KNOW WHAT THEY ARE AND DON'T SUFFER FROM GOOGLEPHOBIA
#1 Making a backup of this crap software when ADB , FASTBOOT and SP flash tool are working correctly is pointless (IMHO) (inm
Here's Everything you should need:
Stock ROM COURTESY...THIS DUMBASS https://drive.google.com/file/d/0B9DmzLnUt5tuaUtJS1FHcjNyX1U/view?usp=sharing
ADB_&_FASTBOOT_executables, no need to install, just extract the .zip to the directory of your choice and execute openCMD.bat with a right click + run as administrator. it will open a terminal window, you can run all your ADVB & FASTBOOT commands from there:https://drive.google.com/file/d/0B9DmzLnUt5tuM29vOTNHNEZya2s/view?usp=sharing
Driver installer & MTK_SP_FLASH_TOOL for MT8127 use this to install the drivers and flash the stock rom + custom recovery.img https://drive.google.com/file/d/0B9DmzLnUt5tudVlrSEtzSE1tWHc/view?usp=sharing
UBIFS_Modified_CWM FOR FLASHING UPDATE-SuperSU-v2.46.zip COURTESY Vampirefo: https://drive.google.com/file/d/0B9DmzLnUt5tueC04RDFVX3plTVk/view?usp=sharing
UPDATE-SuperSu-v2.46.zipflash this with vampirefo's modified CWM recovery image UBIFSRecovery4SuperSu.img" https://drive.google.com/file/d/0B9DmzLnUt5tuZjlmVm1Wc2tFUTA/view?usp=sharing
TWRP Setup.exe...Used to install TWRP recovery after flashing Stock ROM + Custom recoveryCOURTESY TWRP team & Protocol 9https://drive.google.com/file/d/0B9DmzLnUt5tuTVVJS2d2RERpbVk/view?usp=sharing
STEP 1: INSTALL THE DRIVERS INSIDE THE MT8127 SP_FLASH_TOOL.zip" file you downloaded It will install the mtk usb vCOM driver we need for the mtk8127. if u have questions PM vampirefo. after that, turn your tablet upside down, FIND THE reset hole and jam the nearest tiny object in there until the screen does something different (like go black) release the reset button, hold VOLUME DOWN and plug in the USB cord and the tablet should be reconized as a preloader USB VCOM Port device under "Ports" in Device Manager
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
So, the necessary driver to save this POS is at hand. after it's done installing the tablet will probably reboot and the remaining drivers will install. (EVEN WITHOUT THE OTHER DRIVER YOU CAN ROOT AND FLASH NOW)
Fire up the MT8127 SP flash tool (run as administrator) you downloaded and you should see this:
Click "Scatter-Loading" and select the scatter file located in the stock rom folder you downloaded and unzipped (you DID unzip it right?) and click the "RECOVERY" FIELD LOCATED HERE:
and select the recovery image you downloaded called "UBIFSRecovery4SuperSu.img......yay, you should be all set up and ready to go!
Make sure youve already unplugged the USB cable AND hit the reset button. HIT THE DOWNLOAD BUTTON (the program is now waiting for your device...no rush) HOLD VOLUME DOWN AND PLUG IN THE USB CABLE, the computer will detect the device, the program will proceed to shove a bunch of ones and zeros down the the tablets throat and it will reboot (hopefully to a mediatek logo).
If so, youre not as stupid as everyone says when u leave the room
Toss "UPDATE-SuperSU-2.46.zip" on a microSD, Power off the device, shove the SD in his home and hold POWER + VOLUME UP until you get prompted to select either RECOVERY OR FASTBOOT, we want recovery so make sure it's selected and press VOLUME DOWN to boot into recovery & install your SuperSU.zip and reboot
once the OS is fully running, run TWRP.exe as ADMINISTRATOR in AUTO mode, TWRP recovery should be installed and u should still have root, if not, you'll need to go into advanced, then mount system before re-installing from zip.
NOW learn ADB and fastboot so I can save my breath next time:
PS, all your GAPPS are gone....quit *****ing, I've got em here: htpa_gapps-modular-micro-4.4.2-20140608-signed.zip(pa_gapps-modular-micro-4.4.2-20140608-signed.zip 85.3MB) & HERE: https://drive.google.com/file/d/0B9DmzLnUt5tuSl9lME9VZnFJTU0/view?usp=sharing(pa_gapps-stock-4.4.2-20140608-signed.zip 267MB))
I have requested this thread be removed, you are using my stuff without permission, and even crediting yourself with the firmware, I took the time to download, you yourself have done nothing but take others work including mine without permission.

[GUIDE] Install Xposed on HTC 610 (S-on, Root)

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
DISCLAIMER: I’m not responsible for bricked devices, all you do is on your own responsibility.
This method should* also work for other HTC phones that have S-on.​
Xposed is a framework for modules that can change the behavior of the system and apps without touching any APKs. That's great because it means that modules can work for different versions and even ROMs without any changes (as long as the original code was not changed too much). It's also easy to undo. As all changes are done in the memory, you just need to deactivate the module and reboot to get your original system back. There are many other advantages, but here is just one more: Multiple modules can do changes to the same part of the system or app. With modified APKs, you to decide for one. No way to combine them, unless the author builds multiple APKs with different combinations.
Rooted HTC 610
'Unknown sources' allowed in the settings.
BusyBox
Go to the Xposed website and download what version you want (I recommend Stable since your flashing Xposed) or download them from the official links down below.
Latest Stable - 2.6.1 - recommended
Latest Experimental - 2.7 experimental1
Install the Xposed Installer and launch it, after that open the 'Framework' tab and tap on the 'Install/Update' button, if it asks you for Superuser permissions, tap the Grant button. The phone should restart automatically, if not tap on the Soft Reboot button.
After rebooting open Xposed Installer again and open the Settings tab, tap on 'Installation mode' and select 'Recovery (write zip to SD card, flash manually)', then go back to the Framework tab and tap again on the 'Install/Update' button. A pop-up will appear onscreen and it'll ask you to Reboot into recovery, hit ok and remember the zip file location (/storage/emulated/0/Android/data/de.robv.android.xposed.installer/files).
When you boot into recovery tap on the 'Install' button and go to Android/data/de.robv.android.xposed.installer/files and select the Xposed-Installer-Recovery.zip. Flash it and it should say it was successful, only thing left is to tap on the 'Reboot System' button. Your phone should reboot and now you have Xposed installed on your HTC 610.
Glad to see more action on this devise
I have followed your instructions, however I do not find the Xposed-Installer-Recovery.zip file. I have just the uninstaller... Did I make a mistake ? Thanks for your work.:good:
I don't know what happened, because I found it just fine, did u select flash manually through recovery in the xposed app itself?
Sent from my HTC Desire 610 using XDA Free mobile app
MGfusion said:
I don't know what happened, because I found it just fine, did u select flash manually through recovery in the xposed app itself?
Sent from my HTC Desire 610 using XDA Free mobile app
Click to expand...
Click to collapse
Thanks for your answer.
I do not flash manually the file yet; I do not find the file Android/Data/de.robv.android.xposed.installer/Xposed-Installer-Recovery.zip with my file explorer.
[email protected] said:
Thanks for your answer.
I do not flash manually the file yet; I do not find the file Android/Data/de.robv.android.xposed.installer/Xposed-Installer-Recovery.zip with my file explorer.
Click to expand...
Click to collapse
It could be possible that it's on sdcard or even on the ext_sd, but I would recommend installing this kernel mod and it will turn off system protection and you'll be able to install xposed with the install to system option if you didn't already s-off your phone.
Is this module compatible with the kernel version 3.4.40-Jmz-A3 ? Thankx !
[email protected] said:
Is this module compatible with the kernel version 3.4.40-Jmz-A3 ? Thankx !
Click to expand...
Click to collapse
It isn't important which kernel it is, so yes it's compatible.
Welcome. Does it work XinternalSD?
Yes
Sent from my HTC Desire 610 using XDA Free mobile app
You can give a description?Because somehow did not work . Thank You
Some already did it, edited the file platform.xml

How to Upgrade/Roll Back on Stock ROM (Officially)

Many people here don't know how to roll back or update their phones' firmware, and that's why I'm making this guide. I hope that it's easy to understand for everyone.
HOW TO UPGRADE/DOWNGRADE STOCK OFFICIALLY
To do this process you do NOT need an unlocked bootloader, and it will NOT void your warranty. If you have an unlocked bootloader, it will also not lock it.
What you need:
-Your phone model (NOT THE MODEL LISTED ON THE FIRMWARE). Flip the phone and look where the ZTE logo is at, it should say either A2017, A2017U or A2017G.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
-Stock recovery. If you didn't tamper with the device you'll most likely have this. If you have TWRP, you can use a flashable zip to get the stock recovery back. There are some for the A2017G, don't know about the others. You can find them at the Download Center. I recommend you to use the same recovery that your firmware version should have, for instance if you are on B04 use the one for B04 or maybe B03. But usually you shouldn' have trouble if you use an older one.
-The firmware that you'll install on the phone. You can either download it on a PC or on the phone itself, but you'll probably need to unzip it.
I recommend trying to download ot on the phone first. If it fails to download, the safe bet is using a PC though.
-RAR if you'll download the system on your phone, or an unzipper on your PC if you're gonna do it from there (7zip, winrar)
IF YOU ROLL BACK, ALL OF YOUR DATA (INTERNAL STORAGE INCLUDED) WILL BE WIPED. BACK UP EVERYTHING YOU CONSIDER IMPORTANT!
If you update, this usually does not happen, but always back everything up just in case.
Regardless that you download it via PC or phone, you'll need the system zip. Knowing the HARDWARE MODEL of the phone, download it either from the official ZTE pages, or via unofficial sites. If you download it from unofficial sites though, check that the zip is ~2.3 GB and that, if you open it with RAR or some zip manager, it has an update.zip inside and a PDF. If it has, follow the instructions; if not, just move it to the root of the sd card (/storage/emulated/0/) and go to Settings - Updates, and update. The A2017G has a list of previously unzipped system zips on the Guides section (Download Center by @raystef66, check it out)
If you know how to use an IDM, it can be very good on the phone. Just sayin'
For the A2017: http://www.zte.com.cn/china/sitecor...rt/detail?id=B4C0ACE418834F588FED0C72D6046C78
For the A2017G:
http://www.ztedevice.com/support/detail?id=98CEB24F9FFD433EA99EC424163149A6
For the A2017U: 'Tis a little bit more fuzzy, there's many different carrier ROMs and there's only one zip from the unlocked model page. Either find a package here on XDA or, if you solely want to update to Nougat, go to the official page and download the zip available for your carrier:
https://www.zteusa.com/support_page/
Select 'Smart phones', the carrier, and ZTE Axon 7 (Not 'ZTE Axon' nor 'ZTE Axon 7 Mini'!)
So, process:
a. If you'll use the Phone:
Once you have the system zip, install RAR from the Play store or an apk, and find the Downloads folder, and the zip you downloaded. The screenshots here are just emulating how one of the official files will look, the numbers of the zip are just random and the sizes are not realistic (I just took some files and renamed them ).
Open the zip, find the update.zip inside, select it with the checkmark, and unzip it.
RAR will ask you where to extract this. Just remove everything after /0/, like on the screenshot. Press OK.
Go to System Update on the Settings, and there should appear the zip, with an sd card icon. Press Update and you're done!
b. If you'll use the PC:
1. Download the zip on your PC.
2. Open your zip manager of choice and open the zip. Throw the update.zip on your desktop.
3. Connect your phone, open the internal storage and throw the update.zip inside.
4. Go to Settings, Updates, and the zip should pop up, with an sd-card thumbnail (even though it's not on an SD card, disregard that). Install, and you're done.

[GUIDE] Bootloader unlock and root without TWRP - ZE554KL, Z01KD*

Hello,
As I had a somehow hard time to find a comprehensive guide on how to unlock the bootloader and root the Zenfone 4, here is a quick guide on how to do so. The method below was successfully used on a Z01KDA.
As usual: this guide will be used at your own risk. I won't accept any responsibility in any way if it results in a damage of any sort on your device.
Click to expand...
Click to collapse
PREREQUISITES
Zenfone 4 (that... should be obvious, but who am I to judge)
A computer with:
Windows (at least Windows 7, I guess)
Fastboot ready to use (I recommend using the file from this link as it is the most straightforward, but if you prefer the SDK tools, well, you do you) and being able to use it (though on a basic level)
A USB-C cable capable of transferring data
Time to read all the annoying stuff below, and patience.
1. Bootloader unlock (from this thread // thanks to OP @shakalaca)​
Whichever method you use to unlock your bootloader, all your personal data and settings will be erased and your phone will be restored to factory default. So, backup everything before going forward.
As this method was used on a rather old version of the Zenfone 4 firmware, I suggest that you use the official downgrade method from Android P to Android O. To do so :
Download the file here on your computer (the main page is located here, under Drivers & Tools), and put it at the root of the phone, do not change the name of the file
After unplugging your phone, it will prompt a software update, proceed with it
If it doesn't work for any reason, use this method instead:
Put the file on a SD card (...inside the phone)
Reboot the phone to recovery (via ADB, or Power button + Volume down)
Install the update from recovery
Wait for the phone to reboot.
After the downgrade, you can proceed to the bootloader unlock:
Download the method of @shakalaca located here
Unzip all the files to the same folder
Get into fastboot on the phone (reboot with Power button + Volume up)
Make sure that your phone is detected with
Code:
fastboot devices
Run the file "ze554kl_unlock.bat" as administrator
Let it do its magic
Your phone will reboot, congrats, the bootloader is unlocked.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2. Install the latest firmware available on your Zenfone 4​
Follow the same steps as in the previous guide (1.), but with this file (the main page is located here, under BIOS & FIRMWARE ==> you have to click on EXPAND ALL to see all files)
3. Root​
On your phone:
Download the Magisk Manager apk from this link on your phone
Install it
On your computer:
Download the file from step 2. above
Extract it to any location
Locate the file boot.img and put it your phone.
On your phone:
Open Magisk
Click on Install
On the next screen, select
Preserve AVB 2.0/dm-verity
Preserve force encryption
Click NEXT
Under Method, click Select and Patch a File
Select the boot.img file
Let Magisk patch the file
Locate and put the modified boot.img file on your computer (in the same folder as the one with fastboot if you did not install it system wide)
Get into fastboot mode (reboot with Power button + Volume up)
On your computer
Open a cmd window
cd to the folder where the modified boot.img is located
Check if your phone is detected with the following command:
Code:
fastboot devices
Input the following command and press Enter:
Code:
fastboot flash boot name_of_the_modified_boot.img
Reboot your phone with the following command:
Code:
fastboot reboot
Your phone will reboot, congrats, it is rooted.
Feel free to ask any question if this guide is not clear, but it should be easy to follow!
I'm not getting past step 1 because my computer doesn't recognize the cell phone when it's in csc mode, it doesn't appear even when I do the fastboot devices command, could you help me?
JãoFrango said:
I'm not getting past step 1 because my computer doesn't recognize the cell phone when it's in csc mode, it doesn't appear even when I do the fastboot devices command, could you help me?
Click to expand...
Click to collapse
install adb drivers

Categories

Resources