Hi I messed up with my LG G5, help needed ?
I want to tell u what i did until now.
I want to root my phone:
1. Unlock Bootloader.
2. Install TWRP
3. Messing around in TWRP becaus i dont finde the SuperSU files cause of encryption usw.
4. Want to Swipe all data and start all over again
5. bootet my device normaly and ther is just the Message "Your device software cant be checked for corruption".
I cant do anything now. I tried to factory reset the phone didnt work. The phone doesnt react to any CMD commands.
I cant enter the TWRP.
I used LG UP to flash the device but LG UP doesnt recognizes my phone correctly, neither in USB Download Mode or in the so calles status, where i just got the blackscreen with the Message"Your device software cant be checked for corruption".
Maybe you guys have a solution.
PS. Sorry for bad english
as long you can start into download mode, your device is not bricked.
this thread should help installing and using LGUP correctly.
https://forum.xda-developers.com/lg-g5/development/uppercut-lgup-loader-g5-variants-t3511295
you have a KDZ for install?
zebulon98 said:
as long you can start into download mode, your device is not bricked.
this thread should help installing and using LGUP correctly.
https://forum.xda-developers.com/lg-g5/development/uppercut-lgup-loader-g5-variants-t3511295
you have a KDZ for install?
Click to expand...
Click to collapse
Thanks i did that and it worked. Thx to you mate problem solved
LG G5 Bricked
Hi guys...
I messed my LG G5 up trying to flash t-mobile nougat kdz via twrp on my rooted 7.0 vodafone branded phone (i wanted to use the WLAN calling feature).
Nothing works, no buttons pushing + power / up / down volume... The ONLY thing, that makes
a sign of life is the windows-sound when connecting the USB cable... there's a device shown
QUSB__BULK (not properly installed) and that's all..
I tried installing USB drivers for the LG G5 and also the Suite / LGUP / LG Mobile Support Tool / Bridge...
nothing works... is there any possible way to to fix it?
Thanks in advance for any kind of help...
mryo said:
Hi guys...
I messed my LG G5 up trying to flash t-mobile nougat kdz via twrp on my rooted 7.0 vodafone branded phone (i wanted to use the WLAN calling feature).
Nothing works, no buttons pushing + power / up / down volume... The ONLY thing, that makes
a sign of life is the windows-sound when connecting the USB cable... there's a device shown
QUSB__BULK (not properly installed) and that's all..
I tried installing USB drivers for the LG G5 and also the Suite / LGUP / LG Mobile Support Tool / Bridge...
nothing works... is there any possible way to to fix it?
Thanks in advance for any kind of help...
Click to expand...
Click to collapse
there is an answer by autoprime to your question
autoprime said:
The unique programmers required for the G5 for BoardDiag to work are not public so forcing your way into 9008 won't get you anywhere.
Click to expand...
Click to collapse
with 9008 he means qhsusb_bulk. The drivers you will need are from Qualcomm, once BoardDiag files for G5 are public.
were the boarddiag files ever made public?
Facing the Same problem
I am now facing the above mentioned problem. My g5 h850 doesn't do anything and the only sign of life there is when i connect it to my PC and it picks up as Qualcom hs- usb Qdloader 9008 other than that no display no sound from the handset whatsoever tried getting it into download mode but it won't show anything. I installed all the drivers and tried connecting with lg up but it doesn't pick the phone on any com ports. Is my phone completely damaged or can I do something to bring it back to life. Please help someone
qfil with firehose or octoplus may solve your problem
Can't find the required files anywhere
sbacham said:
qfil with firehose or octoplus may solve your problem
Click to expand...
Click to collapse
QFIL needs PrimaryGPT_0.bin file through firmware extractor but no matter what stock firmware i extract I get multiple patch files like PrimaryGPT_0.bin, PrimaryGPT_1.bin, PrimaryGPT_2.bin, PrimaryGPT_3.bin .......PrimaryGPT_7.bin and when I try to get them through emmc it won't recognize any of the GPT files. That's the step where I am stuck plus I can't seem to find the mbn file for H850
I have lg v20, I too hardbricked my phone, when I extract any kdz I got 7 gpt files. primarygpt0 to primarygpt06 as you said.
are you sure we only need primargpt0 to flash via qfil? i think we need proper firehose/ programmer file and rawprogram file
Maybe I hard bricked mine:
Flashed with uppercut in download mode but with every KDZ file in UPGRADE mode I tried , after the second lg logo with sound of wellcome, it freeze and reboot over and over, it seems that crushes in infinite bootloop. Is this hard bricked?
no, this is not hardbricked. atleast you can enter into download mode.
trash195 said:
Hi I messed up with my LG G5, help needed ?
I want to tell u what i did until now.
I want to root my phone:
1. Unlock Bootloader.
2. Install TWRP
3. Messing around in TWRP becaus i dont finde the SuperSU files cause of encryption usw.
4. Want to Swipe all data and start all over again
5. bootet my device normaly and ther is just the Message "Your device software cant be checked for corruption".
I cant do anything now. I tried to factory reset the phone didnt work. The phone doesnt react to any CMD commands.
I cant enter the TWRP.
I used LG UP to flash the device but LG UP doesnt recognizes my phone correctly, neither in USB Download Mode or in the so calles status, where i just got the blackscreen with the Message"Your device software cant be checked for corruption".
Maybe you guys have a solution.
PS. Sorry for bad english
Click to expand...
Click to collapse
Hi . I I would like to know did you slove your problem ? If yes then what you did plz let me know I’m having same problem with my lgh850.
hello i have i mi note pro that has been bricked for a while and im trying to fix it.
i think it has 2 problems that has to be solved but im not sure.
first thing that i tried to fix was that the device only started up when i was charging it from an adapter. when i connected it to the computer it just flashed the red dot with second in interval. i searched for a solution in forums and found out that similar problems had been solved by pulling the battery out and putting it in again after some minutes, but it did not fix the problem. and thats when i get to the second problem.
2nd prob is that, when i get my device started ( by having it connected to the adapter) it only flashes the mi logo. And i realized that i could start fastboot, and then quickly while fastboot is on connect to my computer. when i write sudo command "fastboot devices" i can see that it recognizes the device. (fastboot is unlocked also if that is to any importance.)
When i last used the phone i had a twrp and an unofficial ROM installed and it got bricked because i tried to install a new twrp or ROM, i cant remember.
I have a feeling that i tried install either a twrp or rom that wasnt compatible with what i had. i had marshmallow 6.x on the device and i think i tried installing something older or probably newer like nougat 7.x
i was wondering if i could some how install a new clean TWRP and ROM on my device trough fastboot so i can continue using this device again.
i would be grateful for any response or help
Hi read this post maybe can helo you
http://en.miui.com/thread-242767-1-1.html
Teddy Lo said:
Hi read this post maybe can helo you
http://en.miui.com/thread-242767-1-1.html
Click to expand...
Click to collapse
hey, thanks for the reply! i did try that tutorial on unbricking my phone. but i only have an laptop with linux on it and, 2 of the steps are not possible for me to do (install MiFlash and finding any Qualcomm HS-USB QDLoader 9008 drivers for linux).
i've tried to install a new rom through an unofficial tool that i found here on XDA - https://forum.xda-developers.com/android/software/tool-miflash-linux-t3708847 . But i haven't had any success with it yet.
maybe if you would know how i can force install a new ROM on my phone through the terminal on my computer the problem might get fixed?
Hey guys suddenly from 2-3 days wifi and bluetooth are not workning in my kenzo..
need help to fix the same..
thanks
More info...
Rom?
Are you install something?
Your phone fall to the floor?
Your wifi have normal MAC? And your Bluetooth?
Daljit Kalsi said:
Admin Note: This is a special Q&A-formatted thread. Please follow this link to view it in your browser: http://xda.tv/post77410044
Click to expand...
Click to collapse
I have miui 9.5 stable installed with unlocked bootloader and ZCX TWRP installed.
I had AEX ROM and i flashed an update on 19th , since then I am facing this problem
No I didn't dropped my phone
Wifi Mac address is 02.00.00.00..00 so.ething like that
Bluetooth address is unavailable
I have miui 9.5 stable installed with unlocked bootloader and ZCX TWRP installed.
I had AEX ROM and i flashed an update on 19th , since then I am facing this problem
No I didn't dropped my phone
Wifi Mac address is 02.00.00.00..00 so.ething like that
Bluetooth address is unavailable
http://en.miui.com/thread-260943-1-1.html
QPST 2.7.472: https://depositfiles.org/files/su8jrd3ai
if doesnt work for you try to update your driver... the tutorial is very good guide!!!
ps: if your MAC is bad after this try to reinstall the rom
about your bluetooth problem... i dont known.
im facing this problem with WIFI after install official miui (miui 9... april date i think) and i fix it with this tutorial.
THIS TUTORIAL CAN BROKE YOUR IMEI... if you fail in something.
is risky but i dont find other usefull mode.
will give it a try today. yeah i broke my imei before, while trying to fix wifi ..
lets hope this may solve the problem.
thanks
nothing happened at all
still wifi mac is 02:00:00:00:00:00
Flash rom with fastboot (MIUI 9 version i recommend) in my case...
If i reinstall with recovery or fastboot... No fix
If i repair imei/wifi with qpst... No fix
After use QPST i reinstall system... Work perfect (i dont remember if i use recovery or fastboot.... Work!
I've updatet my sm-g935f on Oreo 8.1 and downloaded a game in play store.
My phone was freezing but restarts the app continue installing an this was the moment software was bricked. When i want to flash twrp i did the noobstyle failure when i flashed it on BL.......
At this moment odin flashing was bad every time.
I tried but then phone shows connect to smart switch when it was in download mode Smart switch did not recognize phone so i flashed twrp again in this case for installing the newest version of superman rom but it is on oreo 8.0 with some tries i get Bootloader installed i think this downgrading was bad too. Lineage os with 8.1 still dont recognize sim card so i went back on superman rom problems dtill the same i can not do phone calls but Bluetooth and wlan are working.
So my problem is i can not get the stock image 8.1
Cause even pit file installing won't work with 8.0
May i solve this with octoplus please help me
Odin download mode shows error with
Device:4 binary:2
Even repacking bootimage due to magisk 18.1 via aroma installer is not working so i dont get su permissions for delete files from sda5
And yeah im not a pro on this pls guide me.
Is there a chanc maybe via adb?
Is it possible flashing 8.0 if i disable "proof apps via usb" in Developer settings(is this secure download?) ???
I've problem with fastboot and I can't using it. And any version rom can't install always gives an error "failed to update! Cause: corrupted".
There are those who have solved this problem, please guide me
x829 (was?) and win10 comp
jkbohra said:
i'm now in dev rom (5.6.219d ) how can i install another rom, fastboot now not working , oem unlock not found. I'm using x829
plz hale me anyone
Click to expand...
Click to collapse
Fixed, if someone has a similar problem, then just take 2 computers or ask or something else, I have not seen the phone in any with the fastboot turned off, as I did not install the driver ...
No solution found with MTP ...
Heyyo, after QFIL I would always recommend updating to latest EUI ROM 30s the CrisBalGreece edition which can be found on Telegram x2 groups or to switch to custom ROMs after doing device firmware update.