Alright I have a weird problem my fast charge / Quick charge is no longer working anymore it only says charging . I have checked to see if it was the charging adapter and cable and both of them are fine because they were fast charging my Note 4. Only 3 things I can think of that might be the problem well 4
1. The charging port is faulty and needs replaced
2. The battery is faulty
3. The processor is messed up but unlikely because it is working fine
4. Something in the system is keeping it from fast charging/ Quick charge
Does anyone have a idea what might be wrong with it ? My phone will normal charge fine it just will not fast charge anymore
Thanks
Might be the cable. Have you triend a different one?
The Charger needs to communicate with the phone before it switches to fast charging mode. If your cable is broken and communication is not possible it will not fast charge.
This is the reason a charge on cable (without the two data wires) will never work for fast charge.
cyvr1 said:
Might be the cable. Have you triend a different one?
The Charger needs to communicate with the phone before it switches to fast charging mode. If your cable is broken and communication is not possible it will not fast charge.
This is the reason a charge on cable (without the two data wires) will never work for fast charge.
Click to expand...
Click to collapse
like I said in the above post it is not the cable and I have tried multiple ones still does not work but when I use the same lg fast charge adapter and cable on my galaxy note 4 it fast charge and even when in use the Samsung fast charge and adapter on my v10 does not work but does work on the note 4.
This happens to me too...I just unplug charger from wall and back in, after that it's all good. I think in my case problem is because charger stays in wall non-stop.
Makonator said:
This happens to me too...I just unplug charger from wall and back in, after that it's all good. I think in my case problem is because charger stays in wall non-stop.
Click to expand...
Click to collapse
I have tried that still no luck at all I am at a lost as what it could be.
Fast charge
I have had the same problem. At first I replaced the battery didn't help so I ordered a new OEM charger. It worked until tonight. I thought I'll give it a little smack on the table. I plugged it back up and now it fast charges just fine. I'm going to try the same on the other charger.
Jdnjc said:
I have had the same problem. At first I replaced the battery didn't help so I ordered a new OEM charger. It worked until tonight. I thought I'll give it a little smack on the table. I plugged it back up and now it fast charges just fine. I'm going to try the same on the other charger.
Click to expand...
Click to collapse
you can check this:
1. Make sure your device is fresh, not too hot because the thermal sensors inside the phone if detect the battery too hot, the charger dont activate fast charging.
2. Make sure the cable you use is good enough, i mean not so flimsy or thinner, it must be fatter because the current fast charge use.
3. If that i say above is right then plug the fast charge into the socket and plug it to your phone, if with in 10 seconds the round circle of fast charging dont appear on battery icon then unplug the charger and plug it again until it ativate fast charging.
its a common problem i have too,, i use the original charger and cable who came with the phone and even the phone are cooler and so on sometimes fast charge dont ativate at first attemp.
Related
Went to sleep last night with my Atrix plugged in as I normally have had all my phones, was playing with it right before I went to sleep and everything worked just fine, woke up this morning and the phone will not power on!
First tried to power it on unplugged and the green light flashed for 2 seconds, and nothing happened. Okay, weird, but I'll go with it. Plugged it in, and the green light stays on now until I press the power button! Once pressed, it flashes off, flashes on for 2 seconds and stays off. Nice. I thought the green light meant it was fully charged - when I woke up this morning, it had no green light on, but it was plugged in just fine all night - grabbed my Jawbone ERA and plugged it in to the charger I had the Atrix connected to and it started charging right away, so I know it works....
Pulled the battery, tried plugging it in and power it on without the battery. Nothing. Tried putting in the battery and plugging it in again to "jump start it" as I had done yesterday when I first got it - apparently you can't just charge the thing when connected to a laptop if the phone is off, it will power on even if you power it off again! Nothing.
What the hell happened in it's sleep? I KNOW rooting it didn't cause sleep death.... This thing doesn't have a custom ROM or any undervoltage adjustments, so why the hell is it acting up??? Damnit, right when I got EVERYTHING set up the way I wanted it too.... can't bring it in to the store and give it up with all my personal stuff on there now, I need this thing to power on to wipe it first!!! I'm leaving it connected to the laptop with the green light on for a while and will see what happens in an hour or so....
EDIT - just searched for and tried to hard reset the phone from this thread, the phone still won't even power on to get to the recovery screen!!!
UPDATE - see below and use the SUPPLIED Moto AC charger or at least one with over 5.0V - NOT a PC and NOT a USB hub!
use the charger that came with the phone. My old HTC ones won't charge the phone for some reason. I bet your battery is just dead.
Did you use the provided charger? I tried plugging my Atrix in to the charger I used for my N1, and found that it did not provide enough current. With the old charger, after the phone died, I had similar symptoms where the green light would flash but phone would not come on. Plugged it in with the Moto provided charger, and 5 minutes later all was good...
I had the same problem. Thought I was gonna have to take it back to the store. I don't know what the problem was but I took the battery out for 5 minutes. Then I plugged it into the wall charger(wouldn't work with PC). I didn't turn it on for 30 min, just left it on the charger. Then I hit the volume rocker and it showed the battery charging symbol which it didn't do before. And then I was able to power it on
Same thing here. I purposely drained my battery on the first use. Plugged the usb cable into the PC and nothing. Same blinking green light with no response. I also thought I'd have to return the phone. Then for S & Gs I plugged it into the wall charger and it came to life. Once I got the battery charged a little bit I plugged it into the PC and it started to charge again. Don't know why, but it worked.
Have been running around the house trying to find valid outlets, and that does indeed appear to be the problem. I found it out the hard way though, should have kept an eye on the thread - used a power outlet instead of a PC USB connection and the screen fired right up! Yes, the phone showed the battery with 0% in it, but at least the screen finally came on!
How I have my phone set up normally is connected to my charging valet on my dresser, connected with a 15 foot USB cable that plugs directly into my desktop. Since the extension is good for just one USB connection, I have that connected to a USB hub and then a MicroUSB cable connects my phone from there. The Captivate, and all the other phones I've ever used, not to mention my Zune and Jawbone ERA, all eat that up and have no issues since the USB hub is powered not by the computer (seven USB cables is just too many for a single PC connection) but by the power outlet in the charging valet. I wonder if the hub is distributing the power requirement for each device and the Atrix needs more than others.
I also figured out that the Moto charger has a 5.1V output on it, as does my Jawbone AC charger. Now I need to start making sure that my each one of my chargers in the cars I own has that same type amount of juice too! You go up 29% in battery capacity and so do the requirements to charge it, huh?
Thanks for all the help, marking this SOLVED....
I used the charger in my bedroom that I've used for the Captivate and others before it and it didn't provide enough juice to charge the Atrix. It quickly switched between charging and not charging. I still had 40% battery showing when I woke up though which was nice. It had been off of charge since 10am yesterday.
Plugged it into an HTC charger and it's fine. The one that didn't work is not a modular charger so the power cord is hard wired to the plug.
Alright, a quick update.... Got the phone charged to 100% while it was off and plugged into the AC outlet with the Moto charger. Put my SIM card back in it - couldn't be without a phone all day! - and fired up the Atrix. Went to Battery Info to see what the status is and while plugged into my USB hub, it says
Battery Status: Discharging
Power plug: USB
....
Battery Voltage: 4124 mV (or 4.124V)
Click to expand...
Click to collapse
What the hell? Then I went right after that and plugged it into the Moto AC charger, it says:
Battery Status: Full
Power plug: AC
....
Battery Voltage: 4207 mV (or 4.207V)
Click to expand...
Click to collapse
Why are POWERED USB hubs and PCs not strong enough to charge the phone? I tried ALL my outlets in my vehicles just now and they ALL show full battery status and plugged into AC! Who screwed this up????
GarciaM25 said:
Why are POWERED USB hubs and PCs not strong enough to charge the phone? I tried ALL my outlets in my vehicles just now and they ALL show full battery status and plugged into AC! Who screwed this up????
Click to expand...
Click to collapse
Did you download the PC Charging Drivers that Motorola requires you to have in order to charge via PC and USB cable? If not, look here.
Battleship said:
Did you download the PC Charging Drivers that Motorola requires you to have in order to charge via PC and USB cable? If not, look here.
Click to expand...
Click to collapse
Wait, you have to have specific drivers on the PC so that the phone will allow a power cable (let's not even worry about it being a USB cable for a second) to charge the phone properly? I have the Motorola Media Link software installed, and that has a ton of drivers on it, that wasn't enough? MORE drivers are required to charge a cell phone? This is madness!
Sorry about the necromancy, but had this problem myself but it is NOT due to a lack of voltage. Thought I'd actually solve this, the problem is CURRENT.
USB2 ports will only ever supply 500ma which simply isn't enough to charge the atrix when it's dead. USB2 powered hubs won't supply any more than this either to meet the USB2 spec. The fact that the AC adapter works is because they tend to have a higher output current in the region of 1-2 amps (you may notice the phone, or any other device for that matter, charges faster with AC adapters for this reason).
On a similar note, cheap car chargers only output 500ma. I know with my desire I can have it plugged in and it charges, but if I use GPS it actually draws more current than it can charge at resulting in the battery draining (albeit, slowly).
So, make sure you have a higher current AC/Car charger, or alternatively, plug it into a USB3 port to charge as USB3 spec allows 900ma (some mobos output up to 1A) which is enough to charge the Atrix.
Stewge said:
Sorry about the necromancy, but had this problem myself but it is NOT due to a lack of voltage. Thought I'd actually solve this, the problem is CURRENT.
Click to expand...
Click to collapse
Hey, no problem, if there's something I misstated, then please, correct it!
Stewge said:
So, make sure you have a higher current AC/Car charger, or alternatively, plug it into a USB3 port to charge as USB3 spec allows 900ma (some mobos output up to 1A) which is enough to charge the Atrix.
Click to expand...
Click to collapse
Not sure about this..... It's been about a year since I got all my USB3.0 gear, and I was super excited about it because I thought that my phone would charge ridiculously fast because of the added output, but I remember reading that 3.0 uses extra pins and those pins account for the added voltage and bandwidth of the cable - we don't have those extra pins when you step down from 3.0 to 2.0, so we lose the ability to charge devices faster as a result. I don't know if I actually proved that theory, but after I read up enough on it, I thought I just didn't have to with that knowledge..... again, correct me if I'm wrong, I've got a lot of 3.0 gear here!!!
GarciaM25 said:
Not sure about this..... It's been about a year since I got all my USB3.0 gear, and I was super excited about it because I thought that my phone would charge ridiculously fast because of the added output, but I remember reading that 3.0 uses extra pins and those pins account for the added voltage and bandwidth of the cable - we don't have those extra pins when you step down from 3.0 to 2.0, so we lose the ability to charge devices faster as a result. I don't know if I actually proved that theory, but after I read up enough on it, I thought I just didn't have to with that knowledge..... again, correct me if I'm wrong, I've got a lot of 3.0 gear here!!!
Click to expand...
Click to collapse
There are indeed extra pins in the USB3 standard but these are to transmit data only. The original USB2 data pins are only there for legacy support and USB3 transmissions use the extra lines. There's still only the 1 VBUS pin which supplies the +5V power. There's also no harm in offering higher current on the connection as a device will only ever draw as much current as it needs until it tops out the supplier, not the other way round
EDIT: Another solution could be to use a splitter cable (common with 2.5" drives)so you can draw from 2 ports, but with a micro connector. I've never actually seen one with USB micro but a quick look on ebay says they do exist
nsaia said:
Same thing here. I purposely drained my battery on the first use. Plugged the usb cable into the PC and nothing. Same blinking green light with no response. I also thought I'd have to return the phone. Then for S & Gs I plugged it into the wall charger and it came to life. Once I got the battery charged a little bit I plugged it into the PC and it started to charge again. Don't know why, but it worked.
Click to expand...
Click to collapse
Hi, can I know that when you plug it into the wall charger, is there any light on? Mine has no light on when plug to wall charger. But I can get the light green when plug into PC USB. Can you share that?
cscmf99 said:
Hi, can I know that when you plug it into the wall charger, is there any light on? Mine has no light on when plug to wall charger. But I can get the light green when plug into PC USB. Can you share that?
Click to expand...
Click to collapse
This is the exact same issue that I am facing now. Did you ever manage to find a solution for this problem?
atrix 4g not coming on
Is there any real fix to this issue i have search high and low and all i am seeing people talking about the battery id dead ... i have two battery that is fully charger and the phone still not coming up.
Hi all, sorry that im posting after two years ago but i am facing exactly the same problem, but i plugged it in my USB port, wich i think its a usb2, and i got the screen on but the cellphone did not say charging instead of that was connect your charger, and it was lower than 3% then it turned off. What can it be a solution??
None of the avobe solutions worked?
Which rom/kernel are you using?
I too have this same issue. My Atrix won't come on. I have 2 of the same phone. I tried the charger and cable from both phones. Neither work. When I first plug it it, the green light comes on for a few seconds then it goes out. I even opened the phone and removed the battery. Used a voltage tested and found my battery has 3.7 volts. Thats almost 100% charge. So it not a problem of power. I plugged the phone to my computer and same green light for a few seconds then gone. Won't do anything. No battery display or anything. I even did the simulated battery removal procedure. Didn't work. Is there anything else I can try? Can't get to recovery mode without display unless someone has a fix for that?
Hmmm, this is a weird one guys.
I can charge my X10 only if it is plugged in to the USB port via the computer. However, when it is plugged directly into the power socket, it does not charge. Now, I've tried two different chargers, and both work when charging another device (my iPod Touch).
I don't understand. The cord can't be broken, since it works when charging from my computer? Yet, the charger (the thing that plugs into the wall) can't be broken either, since another charger didn't work and also both have the ability to charge my iPod.
What's up? :S
Thanks in advance.
NOTE: Even when charging while off works on the computer, just not when it's plugged in (and I am not using a custom kernel either). I doubt the ROM matters (since it still has the above problem while charging when off), but even so, I'm using v061 of Wolfbreak's 6.1.3 ROM.
Bump bump, bump it up!
Do you use the original SE in-wall charger? If not, thats the problem, if yes I recomend to test with a different wall charger (eg. from another device)
May be the cable it faulty? Because the PC charging uses a less amount of Volts (to my knowledge) and the charging while connected to PC is very slow. Did you try with any other Official cable?
It could possibly be your cable as mine broke a few weeks back (Same Problem), I just replaced the cable now its fine
Guys :-/
Went out and bought a new cable, and still not charging from the power Only from the slower laptop USB port :'(
I think it may be the X10 itself..
I am still suffering from this problem And sometimes when it's connected to the PC and displays 'charging', it instead discharges
Mayazcherquoi said:
I am still suffering from this problem And sometimes when it's connected to the PC and displays 'charging', it instead discharges
Click to expand...
Click to collapse
Maybe the connector in the phone is broken????
Yep your usb port is broken, mine did exactly the same thing. You will have to send it to fonebiz in rockdale, nsw. I just got my phone back, took 6 weeks to repair!
blade828 said:
Yep your usb port is broken, mine did exactly the same thing. You will have to send it to fonebiz in rockdale, nsw. I just got my phone back, took 6 weeks to repair!
Click to expand...
Click to collapse
Rockdale? 6 weeks?! Not going that far. :-/ I can live with just charging from the PC at the moment.
Thanks though Sad news indeed
Is is still under warranty? It will eventually stop charging from the PC too. I was waiting for parts to arrive so maybe they have them in stock now. That was 6 weeks from melbourne and back.
Going through the same thing in the US. I was told repair would be 5-7 days, but I'm sure I'm looking longer. If it comes back within the time frame they gave me I will be pleasantly surprised. I hope you're still under warranty and do your self the favor and send it in or soon you will have a very expensive paper weight. Good Luck!
I went through the exaxt same thing. It stopped charging from the wall but could only charge from computer but eventually stopped charging altogether.
Did you try taking out the battery and plugging in with the original se microusb cabe to the wall. After 5 min. put the battery in. First time didnt work for me but then i took out the battery again and put it back in immediately and then it turned on.
try getting a usb-to-wall charger, and plugging your computer usb cable into wall.
Sent from my X10 TripNMiUI using XDA Premium App
Out of curiosity, how long before each of your X10's stopped charging altogether? :S
Because, for me, it's been longer than two months and throughout that time I've managed to keep charging it via the computer.
Thanks.
Mayazcherquoi said:
Hmmm, this is a weird one guys.
I can charge my X10 only if it is plugged in to the USB port via the computer. However, when it is plugged directly into the power socket, it does not charge. Now, I've tried two different chargers, and both work when charging another device (my iPod Touch).
I don't understand. The cord can't be broken, since it works when charging from my computer? Yet, the charger (the thing that plugs into the wall) can't be broken either, since another charger didn't work and also both have the ability to charge my iPod.
What's up? :S
Thanks in advance.
NOTE: Even when charging while off works on the computer, just not when it's plugged in (and I am not using a custom kernel either). I doubt the ROM matters (since it still has the above problem while charging when off), but even so, I'm using v061 of Wolfbreak's 6.1.3 ROM.
Click to expand...
Click to collapse
I've 3 usb-to- chargers here:
From a MP20 phone, generic charger that can't charge my phone and also can't charge most of other devices, output power and voltage are low.
From an old Ipaq(not ipad) it does charge my x10 for some reason takes longer than the original, it says on it 1000mA and 5V, I don't remember the real amp and voltage on it.
And the original one, always charge really fast(2 hours for a full 0 to 100% when the phone is ON)
Conclusion, buy and original charger if you not using one, which seems to be the case.
OR, update your baseband if possible, as battery issues are normally related to baseband are normally the cause of this errors.
To make sure you can always try to do a SEUS repair.
Neo said:
May be the cable it faulty? Because the PC charging uses a less amount of Volts (to my knowledge) and the charging while connected to PC is very slow. Did you try with any other Official cable?
Click to expand...
Click to collapse
Sorry to say this, but your are wrong man.
My charger says 5.0V which is exact the same voltage as any USB ports(exception for some internal USB ports used commonly for bluetooth and other low consumption devices that use 3.0 to 3.3V).
The difference is mainly on the amount of power amp it can supply, the original usb cable + wall charger provides 700mA, while in the PC USB 2.0 ports provide 500mA, 1.0 USB provide 100mA and 1.1 I don't remember now, generic usb wall chargers say sometimes they provide 500mA but they mostly provide 30l0mA and sometimes they do not provide on 5.0V they oscillate between 4.6 to 5.2V a good usb port have to provide 4.95V to 5.1V any difference from this may even burn a phone if higher and not charge or reduce a battery life if too lower.
Everytime a battery is not charged up the end of 100% they battery life gets a bit reduce as next time even if you leave it to charge up to 100% it won't really be at 100%, this can only be seen by measuring the battery voltage after the charge, fully charge it must reach up to 4.7V
on the battery or something like this.
Mayazcherquoi said:
Guys :-/
Went out and bought a new cable, and still not charging from the power Only from the slower laptop USB port :'(
I think it may be the X10 itself..
Click to expand...
Click to collapse
If the cable is too thin(like 1.0 usb cables they can't handle 500mA if connected to an already extended usb port it may not get recognized and also not even charge.
Laptops usb ports may not allow 500mA it different for every laptop, some work, some doesn't and others your have to set that on bios.
Mayazcherquoi said:
I am still suffering from this problem And sometimes when it's connected to the PC and displays 'charging', it instead discharges
Click to expand...
Click to collapse
Always when connected to the PC it should say charging, if it did say discharging at some point then there was something wrong.
But charging on the pc is very slow and not good.
denenatse said:
try getting a usb-to-wall charger, and plugging your computer usb cable into wall.
Sent from my X10 TripNMiUI using XDA Premium App
Click to expand...
Click to collapse
Is there any other model of charger than a usb-to-wall? Sorry my lack of knowledge on this, but i never saw a wall direct charger for x10.
Thanks button is appreciated, rsrsrs
The phone holds its battery well under regular use, however when I connect it to the charger, the phone takes long to charge. I have to turn off the phone and let it charge over night so that the battery charges from 30% to 80%. Again under regular usage, the phone does hold the battery well its just the charging that is ridiculously slow. I have wiped the phone and cleared the cache and still find it to charge slowly.
Is this a battery issue or a bad connection?
Are you using the oem charger?
Is it connected to the wall, or a pc?
Charging from a pc causes it to "trickle charge" which using a non oem charger will cause the data pins are active, you'll need to hack the cable and short the middle data pins to get it to fast charge like an oem charger.
studacris said:
Are you using the oem charger?
Is it connected to the wall, or a pc?
Charging from a pc causes it to "trickle charge" which using a non oem charger will cause the data pins are active, you'll need to hack the cable and short the middle data pins to get it to fast charge like an oem charger.
Click to expand...
Click to collapse
Using the OEM charger, and connected to both wall and PC results in the same slow charge. When connected to my PC this morning, it kept making the sound as if connecting and disconnecting every second even though it remained plugged in.
Ah that sounds like a bad cable then.
Or, worse case scenario, a bad usb port on your phone.
studacris said:
Ah that sounds like a bad cable then.
Or, worse case scenario, a bad usb port on your phone.
Click to expand...
Click to collapse
+1111111
definitely a ****ty USB cable
I had that happen to me. I found out it was a bad USB cable after swapping out the cable with another one. Try swapping both the cable and the charger to see what changes your charge time the most and you'll have your culprit.
I have exaclty same symptoms, tried different cables and chargers but no luck. Any clue?
ahnaguib said:
I have exaclty same symptoms, tried different cables and chargers but no luck. Any clue?
Click to expand...
Click to collapse
yes....
buy a "new" samsung cable and charger for the galaxy note....nothing else....
and charge from the wall, not PC.....g
So I pay £45 a month for my Samsung galaxy mega 6.3 I've had it for a month and a half now and its a lovely phone, works well and everything, however all of a sudden I plug my charger in and it constantly flicks between charging and not charging (the little lightning bolt symbol appears and disappears constantly) whilst the cable is firmly plugged into the phone, this is when the screen started to flash at me and click on things I haven't touched , the most common thing it does is switch on driver mode , the back and options button flash at me and the screen switches on and off rapidly, I've reset the phone and tried a different battery and still the same result, its not as bad now, when I put the charger in this time the screen doesn't go weird it's fine its just my phone will charge but after 5-10 minutes it will stop charging again and I have to go and unplug it and plug it in again, this is seriously annoying so is it a malfunction with the phone? Is It something I've done? Is there an easy way to fix it? I need help please!
Is that the same when you charge your Mega through USB cable from PC? If yes, then it is phone's hardware problem, but if NOT, I would suggest to change charger.
Charging from PC is also possible, but the charging current is about 1/4 th of current from dedicated wall socket charger - the phone is charged although much less intensively.
Nominal charging current from wall socket charger is approx. 1.9 amp so if you need to find new one, choose wisely and accept only charger with 5V 2A specs.
Hi
It has been a few days that i have faced a weird problem with my phone.
My phone suddenly stopped charging with fast chargers and only works with super fast chargers.
When connected to any charger other than super fast charger, the charge drops instead of rising. When i connect a super fast charger, it charges fine. But sometimes gets 95% and some times gets 100%. If i reconnect the superfast charger, the phone wont even show charging. Must switch to normal charger or wireless charger and switch back to super fast charger in order for it to work.
Being on or off does not affect the results.
Wireless charging works fine.
Due to the conflicting results, I can not guess the cause of the problem.
Whether the problem is from the battery, Main board, charging socket, or software or malware, i cant figure it out.
Any suggestions?
Best I can suggest is clean your type c port with a sewing needle. These ports get trash in them everyday very easily then packed in.
The bottoms of these ports are metal not plastic. Shiny silver metal. If it's dark black or anything other. Its dirty and your cord is not being inserted all the way due to the trash compacted in. I have seen this on a regular basis and 9 out of 10 times this is the cause
alijj88 said:
Hi
It has been a few days that i have faced a weird problem with my phone.
My phone suddenly stopped charging with fast chargers and only works with super fast chargers.
When connected to any charger other than super fast charger, the charge drops instead of rising. When i connect a super fast charger, it charges fine. But sometimes gets 95% and some times gets 100%. If i reconnect the superfast charger, the phone wont even show charging. Must switch to normal charger or wireless charger and switch back to super fast charger in order for it to work.
Being on or off does not affect the results.
Wireless charging works fine.
Due to the conflicting results, I can not guess the cause of the problem.
Whether the problem is from the battery, Main board, charging socket, or software or malware, i cant figure it out.
Any suggestions?
Click to expand...
Click to collapse
Hi, did you find a resolution to this?
My Samsung Note 20 is doing the exact same thing.
It will not charge with the normal charger.. I have to first charge it a bit with the wireless charger and then with the normal charger. As of this morning, the wireless charging is also intermittent.
Thanks.
msb111 said:
Hi, did you find a resolution to this?
My Samsung Note 20 is doing the exact same thing.
It will not charge with the normal charger.. I have to first charge it a bit with the wireless charger and then with the normal charger. As of this morning, the wireless charging is also intermittent.
Thanks.
Click to expand...
Click to collapse
Hello
Unfortunately, I have found no solution for this. I have sent the phone to service center. Since they have not said anything yet, i guess it is not a software or even a known problem. It is definitely a serious hardware problem.
I am having the exact same issue here as well. I plug it into a normal charger and the battery continues to drain. A lightening charger is the only thing giving it juice.
Solissfiend said:
I am having the exact same issue here as well. I plug it into a normal charger and the battery continues to drain. A lightening charger is the only thing giving it juice.
Click to expand...
Click to collapse
Will it recognize the super fast charger when you immediately disconnect and reconnect it?
alijj88 said:
Will it recognize the super fast charger when you immediately disconnect and reconnect it?
Click to expand...
Click to collapse
Yes superfast charging is not the problem at all. Its when I plug in a normal charger, it will say its charging but it doesnt.
Solissfiend said:
Yes superfast charging is not the problem at all. Its when I plug in a normal charger, it will say its charging but it doesnt.
Click to expand...
Click to collapse
Well if factory resetting does not solve the problem, don't waste your time for a solution. It is a faulty hardware. Go to Samsung service center instead. The will probably replace the motherboard or the phone.