A cautionary tale for those who have or are looking at the Tetded/TETDED slim leather case on eBay or elsewhere. I have had this case for about a month and it has been great - snug, nice leather and best of all a nice slim fit, similar to the Apple leather case for the iPhone. Today I took the case off to kind of just take a look at the phone and wipe away any schmutz and much to my chagrin, noticed some wear marks on the glass (top of the phone). While faint and kind of hard to notice due to the glass being shiny, it has wear marks nonetheless. I sent a message to the seller on eBay who asked for pictures of the wear, which will be tricky to take, like I said, because they are both faint and the glass is shiny.
I like the case a lot and would easily recommend it to someone looking for this style of case, but after noticing this...I don't think a case should leave marks on your phone.
I have a full skin on my pixel. Front and back. Do you think there is enough give in the case to fit over a skin?
fracman said:
I have a full skin on my pixel. Front and back. Do you think there is enough give in the case to fit over a skin?
Click to expand...
Click to collapse
It would be pretty damn tight.
Could you shield the glass with some carefully-cut-out plastic kitchen wrap before putting it in the case? (There's probably a better kind of plastic film to use, but that's the first one that came to mind.)
UnusualSuspect said:
Could you shield the glass with some carefully-cut-out plastic kitchen wrap before putting it in the case? (There's probably a better kind of plastic film to use, but that's the first one that came to mind.)
Click to expand...
Click to collapse
I have a skin on the glass only
Thanks for the warning. I've been eyeing this case. Guess I should stop.
I had an orange version of this case, cleaned it with leather cleaner and the dye came off! I love a nice premium leather case, but this isn't it in my book.
Just sad we cannot get a high quality slim leather case, that isn't a wallet or folds out into a stupid origami swan or something. If the Pixel is selling as well as we are led to believe, I am surprised more folks aren't making them.
mtoomey79 said:
Just sad we cannot get a high quality slim leather case, that isn't a wallet or folds out into a stupid origami swan or something. If the Pixel is selling as well as we are led to believe, I am surprised more folks aren't making them.
Click to expand...
Click to collapse
More likely is that leather cases are not very popular now and they take a lot more production to make compared to a molded case. Less demand, more production costs means less availability.
I have the exact same case, and have had mine on for about a month as well, maybe slightly longer.
Just checked the back of mine and it's fine - totally scratch free and perfect under the case. I can't see how this case would damage the back of the phone as it's backed with a thin layer of foam.
Maybe some crud got stuck in between the case and the back?
Related
Just ordered it tonight and will post pictures when I finally get it. That was my favorite case, with the standard battery, for my s4 when I had it. Slim, rubber inside, hard shell outside, rubber ribs for grip and anti slide on the back. It never interfered with a tempered glass screen protector, as long as you installed it perfectly centered in accordance with the edges of the frame, not the home button. It's on sale, this weekend, and I'm guessing until cyber Monday, for five dollars off and free shipping via USPS. http://www.speckproducts.com/smartphone-cases/samsung/candyshell-grip-for-samsung-galaxy-note-3.html
Nice find. I like Speck. They make quality stuff.
Sent from my SM-N900P using Tapatalk
Never used a speck case before I like the design ..how does it. Compare to a uag or otterbox commuter in terms of size/protection?
Sent from my SM-N900V using Tapatalk
It's similar to a UAG in terms of protection. One layer silicone inside lining, attached to the plastic exterior.
Different then a commuter with a wrap around silicone lining with a separate exterior hard lining
Sent from my SM-N900V using xda app-developers app
It's smaller than the commuter. When you install or remove it, the case is all one piece. The layers don't come off. Easy to put on or take off. Shouldn't need reaming mod for most headphones. Won't slide when placed on a surface back down. Good amount of lip protecting the screen and camera. The rubber layer is slightly harder density than rubber on otterbox.
Def glad to see it out for the Note3. I plan on ordering this when 12am hits for cyber monday from the Speck website. Just wish they had the white and black version like they usually do.
I had a Speck candyshell (non-grip) for the iPhone 5s and loved it. It was hot pink and white but it was only $5. Not digging the Spigen Neo Hybrid because its way to slippery for a phone this big. The issue I see here is that it's $40.
Edit: Speck has a holiday deal knocking the price down to $35.
Edit 2: The case is now $30 after 25% off.
I love my tech 21 for my note 3, but would be interested in the Speck. I like the candyshell over the Candyshell grip though
Looks like black is out of stock.
Sent from my vzw note 3
Glad I ordered mine before making this post. Hopefully I'll get it before Friday. I'll post pics when I get it. Lots of close ups so you all can see the details.
Previous reply was rejected. I'm not going to type out all that again. My pictures and a video turned out crappy and out of focus. Long story short. This case protects better than just tpu but less than otterbox defender. It's slender and fits snug. The same quality you can expect if you've ever owned a speck case before. Grip ribs help with sliding but won't make it an effort to get out of a pocket like a glossy tpu or silicone case. Quality of build and function I give it five out of five. It's not cheap but you get what you pay for. This case will definitely be my daily driver!
gcforreal said:
Never used a speck case before I like the design ..how does it. Compare to a uag or otterbox commuter in terms of size/protection?
Sent from my SM-N900V using Tapatalk
Click to expand...
Click to collapse
Tight fit!
They are better at excluding dust than any other case in my experience. If they used a plug to cover the USB/earphone jack openings they would be better than anything else out there for this kind of protection.
That's a good thing too as being harder to put on and take off means intrusive dust could potentially grind on the finish, etc.
Bad news for battery swappers though.
Protection is good, you can literally toss it at a brick wall repeatedly and not worry about damage or even the case coming off in between throws. The grip is also far better at not showing wear/scratches from sitting on tables, etc. like the normal version. The high gloss back of the normal version will reveal marring/scuffing of sitting on tables, countertops, etc. in relatively short order.
Bulk-wise they fall in between a minimalistic TPU (Diztronic, Bounce, Tudia, etc.) and UAG with protection on par with UAG.
Its asking price is fair for the quality received.
Just got mine today and fitment, quality, etc. is identical to past Speck products.
The buttons are covered, retain their clicky tactile feel and are no more difficult to depress than the naked phone! Fit is very snug, have not tried to take it off. It feels identical in hand to the candyshell grip that I use on my HTC one. It adds very little thickness, very similar to a TPU with far better drop protection. Even with a TPU I cringe if the phone slips, no worries here. Cutouts are well aligned and very tight. The S-pen cutout is quite tight requiring a fingernail to pull it out.
The camera is recessed sufficiently to prevent issues with setting down/dropping back first on a hard surface. The overall feel is it's well thought out and does not look thrown together like some other cases that were rushed to production. Worth the $$$ and I got another five bucks off ($30 total) by using a CNET coupon code. I always Google for codes when I see it on a website at checkout. Not sure if it's still valid and the black grip is OOS now...
Amazon doesn't even have this case (yet) and to get it for $10 off is a no-brainer!
Its a nice case i love the way the button, might have the best feedback but this case is worthless, within a few hours scratches will start to form and by the 2nd week you already want to replace because of the scratches. The darker the case the faster the scrtches will appear
I didn't notice scratches with my s4 and I had the case for months. Even so, it's better for the case to get scratches than the phone.
oscarthegrouch said:
I didn't notice scratches with my s4 and I had the case for months. Even so, it's better for the case to get scratches than the phone.
Click to expand...
Click to collapse
then you must carry it in a cloth because everyone knows specks cases scratch within like 1 day like they've been in a warzone. they are great cases but they don't keep the look.
$40 for that? Ouch. Looks like it should be $19.99 to me.
Yeah I keep mine in my pocket with nothing else in that pocket.
I never liked the Speck Candyshells. They scratch up like it's no one's business. They do look real good when you take it out of the package though.
Best thing is that they will replace their cases without any questions asked
Sent from my SM-N900T using Tapatalk
I could not find any reviews of this bumper. I was interested in getting it but I wanted to see if anyone had thoughts about it first.
http://www.casefanatic.com/samsung/luphie-metal-bumper-frame-samsung-galaxy-s7-edge/
http://www.aliexpress.com/item/For-...on-Aluminum-Frame-For-Galaxy/32625294136.html
Not for the S7, but I owned one for my Note5 up until last week, and man was it pretty. I got the Gold bumper to go with my White Note5. I also got a leather skin from DBrand and that phone was so pretty. It was nice quality, and I thought it was worth the cost. I purchased it from a stateside seller from Ebay who imported them from China for half the cost of casefanatic.com. The one thing I will caution is that only the very inside of the Luphie case is protected by a small line of foam, not the inside of the sides (if that makes sense). This means that the actual metal bumper of the phone itself will get scratched, metal on metal, leaving small lines all around the phone bumper. Also, my signal was affected just a little. I suppose that's due to the aluminum covering the antennas.
I don't know that I would buy it again, honestly. It did look very nice for sure. But, I think it takes away from the actual day-to-day function of the phone. I hope this helps!
actually, the brand of that bumper is Ginmic, not Luphie. These are 2 factories, design is the same but different logo.
here is the Luphie one. http://www.ipromarket.com/luphie-ra...er-case-for-samsung-galaxy-s7-edge-g9350.html
Quite expensive but damn, so pretty!
I own a silver aluminium Luphie bumper with the black leather backing for my s7. So far I'm pretty happy with it and it's not given me any hassles as of yet. One thing I was surprised by was the fact that the leather backing was not attached to the aluminium frame and was rather a sticky piece of leather that attaches to the rear glass of the phone. Not what I was initially after but it's been alright so far and it's very adhesive so that's good.
Very difficult to line up the leather backing when you first stick it on so take your time and start from the camera side heading down the phone. The backing makes the phone very grippy on surfaces so it's much safer to leave it on tables and stuff but the aluminium sides are a bit slippery and of course the phone feels slightly heavier. It does look aesthetically pleasing though and I can't fault the built in buttons on the Luphie bumper because they are excellent and haven't hampered the phone in any way.
I ordered them off eBay from a Chinese distributor and with post and packaging they came to $12 each.
Any other questions just ask and I will be happy to help..
zimcommando said:
I own a silver aluminium Luphie bumper with the black leather backing for my s7. So far I'm pretty happy with it and it's not given me any hassles as of yet. One thing I was surprised by was the fact that the leather backing was not attached to the aluminium frame and was rather a sticky piece of leather that attaches to the rear glass of the phone. Not what I was initially after but it's been alright so far and it's very adhesive so that's good.
Very difficult to line up the leather backing when you first stick it on so take your time and start from the camera side heading down the phone. The backing makes the phone very grippy on surfaces so it's much safer to leave it on tables and stuff but the aluminium sides are a bit slippery and of course the phone feels slightly heavier. It does look aesthetically pleasing though and I can't fault the built in buttons on the Luphie bumper because they are excellent and haven't hampered the phone in any way.
I ordered them off eBay from a Chinese distributor and with post and packaging they came to $12 each.
Any other questions just ask and I will be happy to help..
Click to expand...
Click to collapse
How was the signal reception? Has it dropped a bit due to the aluminum?
ejsoliveros said:
How was the signal reception? Has it dropped a bit due to the aluminum?
Click to expand...
Click to collapse
The signal reception seemed to stay normal. However the GPS was affected and would drop out every now and then when using google maps, waze etc.
zimcommando said:
The signal reception seemed to stay normal. However the GPS was affected and would drop out every now and then when using google maps, waze etc.
Click to expand...
Click to collapse
When GPS becomes glitchy, what quick fix do you usually do? Has it all been patience or have you discovered any workarounds aside removing the bumper? I could imagine having to switch cases when travelling I would be using a clear bumper case, all else I'd be using Luphie. Just ordered mjne for OnePlus 5t though.
When I realised that it was the case doing it, I was a bit bummed. Eventually I stopped using the case because it was not really simple to remove it each time. The screws make this a slightly more difficult task to do when you need it done on a regular basus. It's a real pity because it's an amazing looking case and I loved the protection it gave. I'm now using an abs plastic/slicon one instead, made by VRS design. No issues with GPS with this one and does the job of protecting everything well enough.
zimcommando said:
When I realised that it was the case doing it, I was a bit bummed. Eventually I stopped using the case because it was not really simple to remove it each time. The screws make this a slightly more difficult task to do when you need it done on a regular basus. It's a real pity because it's an amazing looking case and I loved the protection it gave. I'm now using an abs plastic/slicon one instead, made by VRS design. No issues with GPS with this one and does the job of protecting everything well enough.
Click to expand...
Click to collapse
That eventually would happen to me as well I guess. Still holding off order cancellation though haha! I ordered from Aliexpress and the seller has not shipped the product yet. I'm tempted to cancel but there is really no option of enjoying the feel of a skinned phone and a bumper since RhinoShield is too bulky for me I think and they have not released one for the OnePlus 5t yet.
First off, I have ZERO affiliation with this company - I paid full price for the case and waited 2 weeks for it to come from China (I had this case with my V20 and was happy they made it for the S8)
I have bought slim cases from Ringke, Spigen, Caseology for the S8 (all from Slickdeals $$$ off posts) and so far all of them felt a bit too slick and thick(compared to what I've experienced with other phones).
I don't know why more companies don't use the "Salient point" design (what this company calls the textured back)
Makes it extremely easy to hold the phone and a good feel in the hands.
Is it worth $10 when you have other slim case options out there for much less (with promotions)? Since I've experienced the feel of it previously I personally think it's worth it. I do wish they had US stock and didn't ahve to wait so long for it.
Now I will say this thing is THIN, like this is going to offer almost no protection from a drop thin (you get corner and back protection but that's about it). I didn't get it for that, I got it to help with holding the phone. Will a skin accomplish the same- probably and I've considered the Dbrand Dragon skin too.
I will say the case fits SNUG - I had a hard time getting it off to take some pics of it
If you're interested this is the link where I got it on Amazon
https://www.amazon.com/gp/product/B06Y98H8C7
Here is the slimmest case I have ever seen:
https://www.amazon.com/gp/product/B06XHFYJM7/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
I bought this https://www.amazon.com/gp/product/B06XH1PWX9/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1 and really like it. It is slim enough for me and has great phone protection.
I've ordered this one. Clear and thin.
https://www.amazon.com/Trianium-Res...d=1493470061&sr=1-1&keywords=trianium+s8+case
Got this one today and it is sweet. Super thin and I like that it covers the buttons.
http://www.ebay.com/itm/232311855985
the thinnest case would be ones made out of polypropylene. some of them get as thin as PAPER. others get thicker/harder plastic feel, but no real point as any drops will crack your glass...
I always buy TPU thermo polyurethane which is very resilient and i've been surprised a few times on how it protected my phones. the thinnest TPU i found are the CIMO
https://www.amazon.com/Galaxy-Cimo-...011&ie=UTF8&qid=1493474636&sr=8-5&keywords=s8
I have the Spigen which is too thick, back side measuring 1.4mm on my calipers
EasyAcc TPU which i'm rocking right now which is 1.3mm
Cimo which hasn't come in yet, but... I've had them for s6 and s7 and it only measures 1mm
I like to cut a small hole and mod the TPU cases so that it works on my modded magnetic charger.
llaugerm said:
Here is the slimmest case I have ever seen:
https://www.amazon.com/gp/product/B06XHFYJM7/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
Click to expand...
Click to collapse
I have this case. It's really nice. Fits well, and really is the thinnest possible case at just .025" thick. I must say it is a little slippery even after using it for a few days. I'll probably try and find a similar one that has a bit better grip, but I would certainly recommend it.
I'd also like to mention there is a small raised lip around the camera opening make the fingerprint reader easier to find while adding a little extra protection the camera.
llaugerm said:
Here is the slimmest case I have ever seen:
https://www.amazon.com/gp/product/B06XHFYJM7/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
Click to expand...
Click to collapse
AdamIsYou said:
I have this case. It's really nice. Fits well, and really is the thinnest possible case at just .025" thick. I must say it is a little slippery even after using it for a few days. I'll probably try and find a similar one that has a bit better grip, but I would certainly recommend it.
I'd also like to mention there is a small raised lip around the camera opening make the fingerprint reader easier to find while adding a little extra protection the camera.
Click to expand...
Click to collapse
I just received this case and it's super slippery.
thinking to try the one that OP bought https://www.amazon.com/gp/product/B06Y98H8C7
or
this eBay one http://www.ebay.com/itm/232311855985
arampapaz said:
Got this one today and it is sweet. Super thin and I like that it covers the buttons.
http://www.ebay.com/itm/232311855985
Click to expand...
Click to collapse
How do you like the case so far? is it slippery at all? what is it made out of?
Thanks
SptMogul said:
I just received this case and it's super slippery.
thinking to try the one that OP bought https://www.amazon.com/gp/product/B06Y98H8C7
or
this eBay one http://www.ebay.com/itm/232311855985
How do you like the case so far? is it slippery at all? what is it made out of?
Thanks
Click to expand...
Click to collapse
Loving it so far. It is a bit slippery though, not like other TPU cases I have which provide more grip. The separation between the camera and fingerprint scanner is a nice touch too. I'm guessing it is made from some sort of TPU., it is soft and flexible but not silicone. Be aware this is very light protection. I just wanted something to prevent scratches caused by everyday use. I was going to go naked, but this is pretty close and gives some protection.
I'm loving the new spidgen neo hybrid case
Not sure what spidgen case(s) you've tried this far but I absolutely love the neo hybrid case...
Highly recommend this one...
Check this out: Spigen Neo Hybrid Galaxy S8 Case Herringbone with Flexible Inner Pr... https://www.amazon.com/dp/B06XP521V1/ref=cm_sw_r_sms_awdb_thRbzbWYMDS0A
For under 15bux hell, I bought 2 (different colors)!
Look, this case is meant to be a minimalist case so I'm not messaging any claims about what would happen if you dropped it face (screen) first onto gravel or an uneven surface but face first on a flat surface the screen is protected and any other basic drop on a corner, back or side I'm fairly certain it would be fine... I'm even able to charge on a Samsung qi wireless charger with the case on...
The textured back is perfect for holding it and gives the phone a nice secure fit to your hand...
I'd give it a 9/10 as it could use a little motmore stand out protection at top and bottom to better protect The screen - but that said, this case is soo thin you won't even notice it on your front jeans our slacks pocket... its seriously svelte...
I picked up spidgen's screen protector 2pk and it's just ok not a fan of The clarity but it's staying put without issue in this case and will have to do until zagg remedies their issues with Their tempered glass for the s8 which is virtually useless and not very case friendly... (if anyone has found a good tempered glass protector for the s8 please tag me or pm me -ty)
Chris
ElBeaner said:
First off, I have ZERO affiliation with this company - I paid full price for the case and waited 2 weeks for it to come from China (I had this case with my V20 and was happy they made it for the S8)
I have bought slim cases from Ringke, Spigen, Caseology for the S8 (all from Slickdeals $$$ off posts) and so far all of them felt a bit too slick and thick(compared to what I've experienced with other phones).
I don't know why more companies don't use the "Salient point" design (what this company calls the textured back)
Makes it extremely easy to hold the phone and a good feel in the hands.
Is it worth $10 when you have other slim case options out there for much less (with promotions)? Since I've experienced the feel of it previously I personally think it's worth it. I do wish they had US stock and didn't ahve to wait so long for it.
Now I will say this thing is THIN, like this is going to offer almost no protection from a drop thin (you get corner and back protection but that's about it). I didn't get it for that, I got it to help with holding the phone. Will a skin accomplish the same- probably and I've considered the Dbrand Dragon skin too.
I will say the case fits SNUG - I had a hard time getting it off to take some pics of it
If you're interested this is the link where I got it on Amazon
https://www.amazon.com/gp/product/B06Y98H8C7
Click to expand...
Click to collapse
I also have the Nillkin PC Ultra thin case and have also found it to be to best compromise between offering decent protection and staying pretty slim. There also a tiny lip on the screen side so that it won't rest the glass on surfaces. Looking at it from the front, you can hardly tell that the case is on. The Nature TPU case by Nillkin is also very nice, but you can only get it from China at the moment.
hejay said:
I also have the Nillkin PC Ultra thin case and have also found it to be to best compromise between offering decent protection and staying pretty slim. There also a tiny lip on the screen side so that it won't rest the glass on surfaces. Looking at it from the front, you can hardly tell that the case is on. The Nature TPU case by Nillkin is also very nice, but you can only get it from China at the moment.
Click to expand...
Click to collapse
They're now available on Amazon with prime shipping
Still rocking this case and love it
kz121 said:
Not sure what spidgen case(s) you've tried this far but I absolutely love the neo hybrid case...
Highly recommend this one...
Check this out: Spigen Neo Hybrid Galaxy S8 Case Herringbone with Flexible Inner Pr... https://www.amazon.com/dp/B06XP521V1/ref=cm_sw_r_sms_awdb_thRbzbWYMDS0A
For under 15bux hell, I bought 2 (different colors)!
Look, this case is meant to be a minimalist case so I'm not messaging any claims about what would happen if you dropped it face (screen) first onto gravel or an uneven surface but face first on a flat surface the screen is protected and any other basic drop on a corner, back or side I'm fairly certain it would be fine... I'm even able to charge on a Samsung qi wireless charger with the case on...
The textured back is perfect for holding it and gives the phone a nice secure fit to your hand...
I'd give it a 9/10 as it could use a little motmore stand out protection at top and bottom to better protect The screen - but that said, this case is soo thin you won't even notice it on your front jeans our slacks pocket... its seriously svelte...
I picked up spidgen's screen protector 2pk and it's just ok not a fan of The clarity but it's staying put without issue in this case and will have to do until zagg remedies their issues with Their tempered glass for the s8 which is virtually useless and not very case friendly... (if anyone has found a good tempered glass protector for the s8 please tag me or pm me -ty)
Chris
Click to expand...
Click to collapse
Could you tell me how much it weighs? Amazon lists 1.4 ounces for both item and shipping weight. That's way to heavy for me.
ElBeaner said:
They're now available on Amazon with prime shipping
Still rocking this case and love it
Click to expand...
Click to collapse
Really? The only nature cases that I've found are shipping from China on Amazon at the moment.
i bought this
https://kase.com/collections/s8
hejay said:
Really? The only nature cases that I've found are shipping from China on Amazon at the moment.
Click to expand...
Click to collapse
https://www.amazon.com/Samsung-prot...TF8&qid=1493729049&sr=8-1&keywords=nillkin+s8
There is the S8 model
S8Plus model
https://www.amazon.com/Samsung-prot...id=1493729085&sr=8-5&keywords=nillkin+s8+plus
llaugerm said:
Here is the slimmest case I have ever seen:
https://www.amazon.com/gp/product/B06XHFYJM7/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
Click to expand...
Click to collapse
Looks nice. It has a small lip at front to protect the screen?
Vogal said:
Looks nice. It has a small lip at front to protect the screen?
Click to expand...
Click to collapse
No Protection with this case. It clearly says in description only for scratch. If you want full protection I would suggest that you get this one from Samsung is very slim:
https://www.amazon.com/gp/product/B06XHWHYLV/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
Bets case I ever had
Spigen Thin Fit Galaxy S8: https://www.amazon.com/gp/product/B...54BCW&linkId=325db0677b883d6c92a8d1a83ac09792
Spigen Thin Fit Galaxy S8 Plus : https://www.amazon.com/gp/product/B...4LGHJ&linkId=22db5b6f758a85f0a88aaa7787bd29bb
ElBeaner said:
https://www.amazon.com/Samsung-prot...TF8&qid=1493729049&sr=8-1&keywords=nillkin+s8
There is the S8 model
S8Plus model
https://www.amazon.com/Samsung-prot...id=1493729085&sr=8-5&keywords=nillkin+s8+plus
Click to expand...
Click to collapse
How is the grip
---------- Post added at 05:05 AM ---------- Previous post was at 04:49 AM ----------
Does the olixar flexishield actually have something special for grip? They say it's a non slip coating but is it any different than regular tpu
I have been using Samsung's official leather case for many years. Every year they are a little different but always amazing. This time is not exception.
I added the same case for the Galaxy S10+ for comparison. The S10+ case completely fits inside the Ultra's case with space to spare, I just thought it was interesting.
I thought the leather case was absolute crap! It didn't feel like leather at all.. just plastic with a leather like texture. It was slippery to beat all hell! It went back immediately!!
xraytedjim said:
I thought the leather case was absolute crap! It didn't feel like leather at all.. just plastic with a leather like texture. It was slippery to beat all hell! It went back immediately!!
Click to expand...
Click to collapse
I did not feel that way. I felt it is a solid case. Its very stylish and I think that is what they were going for when they made it. You want strong protection then use the appropriate case. For me the leather case from Samsung is incredible. I could not have designed a better case myself. Well maybe a card slot on the back or even inside the case but oh well.
Curious about the camera lip protection with the leather case. I keep hearing varying reports about whether or not it's flush or there is a slight lip to protect camera when the phone is laying on its back. Specifically on the Ultra.
Minimal protection for the camera glass. It's just about flush. If you lay it on a table screen up and spin it around the glass isn't going to be touching the table. If there's any dirt on the table with particle size larger than beach sand it could possibly touch the glass. So it's close. But it doesn't rock and it keeps the thin profile much like the Apple leather case. Unfortunately it's got the Apple price too. Aside from that, it's nice and the buttons preserve perfect tactile feel and are good quality.
mine just arrived from my preorder credit.
Solid case and yep its basically flush with the camera. Personally its my case to have around the house (which is all the time these days ), but if i'm jogging or doing outdoor stuff, I go for a more heavy duty case.
pinoymutt said:
Curious about the camera lip protection with the leather case. I keep hearing varying reports about whether or not it's flush or there is a slight lip to protect camera when the phone is laying on its back. Specifically on the Ultra.
Click to expand...
Click to collapse
No lip on the camera bump. It seats flush or the lip is so small, I can't notice it
I never should of used $50 of my credit for it. It looks like plastic and doesnt even hide camera bump. No protection. Lesson learned.
Sent from my SM-G988U1 using Tapatalk
johnwayne27 said:
I never should of used $50 of my credit for it. It looks like plastic and doesnt even hide camera bump. No protection. Lesson learned.
Click to expand...
Click to collapse
I have the leather case and think it's great. Mine extends past the camera bump so if you lay it down flat the camera's protected. Mine came from the EU but I can't imagine the U.S. version is any different. Mine looks leathery enough for what I paid. Different strokes.
johnwayne27 said:
I never should of used $50 of my credit for it. It looks like plastic and doesnt even hide camera bump. No protection. Lesson learned.
Sent from my SM-G988U1 using Tapatalk
Click to expand...
Click to collapse
umm idk what leather case your talking about because it cant be the same leather case i got because mines fits perfectly and feels good to hold like leather should.
I got the leather black case and I like it. It is not protecting well the camera i.e. ideally the case should stick out a tiny bit but is hiding the bump well. On the front it does better job. The feel is very good and leather.
I have the plastic rubbery blue case too and it protects better the camera module but may be a bit worse job in the front.
I got the OtterBox Defender Pro with Holster. $60 after 10 bucks off promo. Probably best protection out there. First day I got phone it was knocked off table at work and fell 3 feet to a concrete floor. Not a scratch, ding or crack. Even the case was perfect. Bet those leather cases Samsung sells won't save your phone under similar circumstances.
I got the leather case with my pre-order and immediately returned it. It was a plastic piece of crap! Didn't feel like leather at all! Felt like plastic with a leather pattern. Was super slippery and not what i was looking for at all! The even crappier thing is the case was $50 worth of credit, but when I returned it, they only gave me $15. WTF!!
While it's really a matter of personal opinion about these matters, my biggest gripe about the case (as with the Apple leather case) is the price. If it were a more reasonable $29, I'd say it's great. It's not really a protective case at all as these go. Black is the only one that will look good over time as the lighter colors will garnish a patina appearance that some may be OK with, like leather gloves as they break in.
This phone has a large, protruding camera bump unlike any other device and presents a challenge to design a case that can adequately protect it and not feel like a brick! Imagine if they made the entire phone thick enough to house (the camera hardware) and have the camera aperture window assembly perfectly flush? 8000mAh battery anyone?
Of course the "anti thicc" crowd would be quite vocal about it.