Moto Z Low Light Camera Lag - Moto Z Questions & Answers

When I use auto mode on the Motorola camera app to take a picture, it tends to lag in low-light conditions, but as soon as it's exposed to light, it moves smoothly. Only when using Professional Mode, and altering the ISO to say about 800/1600 it moves smoothly (I understand that it's in picture mode and not video mode, but isn't it supposed move as smooth as if you were in video mode? Another example is when I use Snapchat, when I try to snap a video in low-light conditions (as it combines the camera and video into one format) it lags. Is there a work around this?

I think the pro mode is the workaround.

Related

X10 Camera questions/problems.

Hi,
I'v noticed some potential problems with my camera, and I have a few other questions too to help make me get the best out of the camera. This is all using 2.1 ROM and SE camera app.
1.When my camera autofocuses, sometimes it emits a light 'clicking' noise from the inside. I'm not sure if this is only me, and I want to make sure it's not an oddity.
And about the autofocus, it's terrible sometimes. The autofocus bracket turns red quite a lot, meaning it's not got a lock on focus and sometimes it shoots with the red bracket meaning it's not focused (this happens on touch to shoot mode). Sometimes, it says its focused on something when it isn't. This usually happens when close up, like 15-20 cm away from the object.
2.Image stabilization- is it good or bad? I've noticed camera shots are a bit more grainy with image stabilization on and it takes a bit of time to process the shots too. Does image stabilization make any noticable impact on quality of photos?
3. Metering:Center, spot vs average. Which is the best?
4.How exactly does Macro mode work? I've not seen any noticable difference of pictures using it and normal mode.
5.Is there a way to remove the jpeg compression, or at least reduce it? I think photos could be MUCH better if sony hadn't implemented that.
So those are my questions. Thanks for any help on shedding light to the issue(s)
1. I noticed that click on K750 also, and I think that autofocusing mechanism. And yeah x10 has terrible autofocus, especcialy on macros
2. Image stabilisation is used mostly in night/low light images and it compesates hands shaking when holding camera. It does not do wonders, but it is much easier to take night photo with stabilisation on. Also when its on, pictures are not sharp as they are without stabiliastion.
3. generaly:
average - for landscapes and well lit shots
centre - portaits
spot - macros
4. you cannont autofocus on macro distance(10cm or so) if macro or auto mode isnt turned on
5. only way to reduce JPEG compression is to use vignette aplication with super fine quality (check Camera 360 app also)
one major tip, play with EV always and youll get much better results
cheers mate
hibiskus said:
1. I noticed that click on K750 also, and I think that autofocusing mechanism. And yeah x10 has terrible autofocus, especcialy on macros
2. Image stabilisation is used mostly in night/low light images and it compesates hands shaking when holding camera. It does not do wonders, but it is much easier to take night photo with stabilisation on. Also when its on, pictures are not sharp as they are without stabiliastion.
3. generaly:
average - for landscapes and well lit shots
centre - portaits
spot - macros
4. you cannont autofocus on macro distance(10cm or so) if macro or auto mode isnt turned on
5. only way to reduce JPEG compression is to use vignette aplication with super fine quality (check Camera 360 app also)
one major tip, play with EV always and youll get much better results
cheers mate
Click to expand...
Click to collapse
Thanks a lot, your post was informative . Cheers
5.Is there a way to remove the jpeg compression, or at least reduce it? I think photos could be MUCH better if sony hadn't implemented that.
Click to expand...
Click to collapse
5. only way to reduce JPEG compression is to use vignette aplication with super fine quality (check Camera 360 app also)
Click to expand...
Click to collapse
28spawn's modded stock camera for 2.1 has somewhat less compressed jpegs and some other improvements. It's in the Themes & Apps section.
I have had a couple of autofocus camera phones now and they have all done the clicking noise during the focusing, so I am guessing that is completely normal. Image stabilization does make the pictures turn out a lot worse, try to avoid using that. And as hibiskus said, the EV controls make a world of difference! Check out this link http://www.digital-photo-secrets.com...xposure-value/ It has some useful information on the EV controls.

[Q] Camera Focus possibilities

Hi!
I've been trying to create photos and videos about objects that are close to the camera, but the phone always focuses on the background.
Are there any way to get manual focus? (Set lenses manually) - maybe from another device/rom?
I know, there is a touch to focus in photo mode, can be usefull sometimes but not perfect.
If no chance to manual focus, how can I use the Touch To Focus option while video recording? - That can't be hardware limitation, as we can use it in photo mode.
Thanks.
I use single auto focus while shooting video, works quite well for me...

Low fps in the photo camera preview, high fps in the video camera preview!

Ok, I wrote also in other threads but haven't been asnwered at all. I have a Snapdragon 435 device from Xiaomi and a high end sensor of the front camera! An OV5675 Omnivision 5 mpx. My problem is devided into two parts. The main part is that I can take extremely high quality pictures with Google Camera, even if the preview image is a very bad one even with camera2api activated, blury and low on framerate ( abou10-12 if high brighness and smoother if I lower the lights of the sensor when simply opening the camera app and not taking pics ) . When it comes to make a video call, in any app like Duo, Whatsapp etc .... The quality of the preview AND of the call is awful! It is vey blury and low fps, just like in the cheap stock camera viewfinder ( preview mode) . I want to understand, is this limited by the software or it is because the hardware is low end?
I will tell you why I am so concerned of this question - When I open the camera app and switch to the video, I get a very cool FPS on the preview ( not when recording, just the preview viewfinder ) and the image is very clear, not blury. When I switch back to the photo camera, the fps of the preview goes down and the image becomes blury and awful ( even in the Google Camera, even in the stock camera) but when I take a picture in any of these, I get clear images in both.
So! Let's go to the point - The quality of the video call in any of the apps, is the same as in the camera preview mode of the photo mode ( in the viewfinder ). How do I comunicate to these 3rd party apps to use the camera mode/ sensor of the video preview mode? How to make the image durinng a video call be clear and not blury like in the photo preview state? The app code should be edited or the rom?

What driver is used by apps to access device camera?

What I mean is ... let's say I am using Skype for a video call. At the moment of connecting to the camera, what is the way it does this? What code is used? What part of the camera is accessed? When I open the camera app of the device, and trigger between photo/video - I get 2 absolutely different images of the preview ( the viewfinder ). The photo preview is on a low fps, if there is enough light, if I reduce the brighness, the preview fps gets smoother.
But when I swicth to video , I get a very clear image, with a high fps, little noisy and clear. Though, the preview of the photo camera is blury ( noise reducted ) and low on frame rate.
So, the calls in Skype has the exactly same image type like the photo preview, blury and fps low.
Is there any way to drive Skype using the camera type of the video viewfinder? It is a very huge difference in quality, and it is very weird, video calling apps use the worst part of the camera, when there's actually obvious the sensor is a high end one, showing it actually can offer a good quality of the image ( while in video mode ).
Please help, I want to try to develope something related to this. How does an app choose how to use phone's camera?

What is best video options for different recording types

I want to ask something about some different video recording situations
What is best video recording options for wide angle video output (quality, stabilisation fps etc...)
What is best video recording options for normal angle video output (quality, stabilisation fps etc...)
What is best video recording options for X3 zoom video output (quality, stabilisation fps etc...)
I see not so many video options but you know what I mean, it's resolution.
Resolution changes the field of view output of video.
What are your settings and why are you using that for different situations.
Shine my dark road with your light of wisdom
I use :
- 1080p 30fps : when I film in a regular way such as filming landscapes, or filming things I don't intend to put an emphasis on
- 1080 60fps : I use this more when I have "living" subject on my frame, such as filming my friends laughing or doing whatever they are up to. The idea is to be able to apply a little slow motion in post to emphasize some moments.
- 120fps : that option is on the slo-mo options. I only use that feature in great lighting and if I intend to create a more dramatic look to the moving subject I wish to apply a slow mo on. But I rarely use that feature since I don't have much opportunity to capture fast moving subject.
I recommend using the Pro mode for video since you can control the focus. (Manual focus, autofocus, focus lock)
Your camera settings depends on what you want to shoot. You will have to play around with all of them and well switch from a mode to another depending on the situation.
30fps provide better image quality
60fps is smoother but somehow less sharp in some situation
120fps don't use it if you don't have enough light otherwise you'll end up with a blurry not sharp not good looking slo-mo.
There are 3rd app such as FilmicPro that gives you more freedom with the camera settings. But I don't use them since I haven't found one that take advantage of the 3 lenses that comes with the Mate 20 Pro. So now I deal with the stock camera in Pro mode.
Hope it helps
This helps a lot. Thanks for posting details.
Mini Jay said:
I use :
- 1080p 30fps : when I film in a regular way such as filming landscapes, or filming things I don't intend to put an emphasis on
- 1080 60fps : I use this more when I have "living" subject on my frame, such as filming my friends laughing or doing whatever they are up to. The idea is to be able to apply a little slow motion in post to emphasize some moments.
- 120fps : that option is on the slo-mo options. I only use that feature in great lighting and if I intend to create a more dramatic look to the moving subject I wish to apply a slow mo on. But I rarely use that feature since I don't have much opportunity to capture fast moving subject.
I recommend using the Pro mode for video since you can control the focus. (Manual focus, autofocus, focus lock)
Your camera settings depends on what you want to shoot. You will have to play around with all of them and well switch from a mode to another depending on the situation.
30fps provide better image quality
60fps is smoother but somehow less sharp in some situation
120fps don't use it if you don't have enough light otherwise you'll end up with a blurry not sharp not good looking slo-mo.
There are 3rd app such as FilmicPro that gives you more freedom with the camera settings. But I don't use them since I haven't found one that take advantage of the 3 lenses that comes with the Mate 20 Pro. So now I deal with the stock camera in Pro mode.
Hope it helps
Click to expand...
Click to collapse
Sure it helps. Thanks for your effort :good:

Categories

Resources