Related
I have had my Omate Truesmart for about two weeks now and I have loved it. When I turned my watch on this morning the bluetooth refuses to turn on. It was working last night but this morning it won't stay on. I have tried from the notification bar and from the settings wireless and networks. Neither approach works. When I slide the toggle to on from settings it immediately jumps back to off.
rschouten said:
I have had my Omate Truesmart for about two weeks now and I have loved it. When I turned my watch on this morning the bluetooth refuses to turn on. It was working last night but this morning it won't stay on. I have tried from the notification bar and from the settings wireless and networks. Neither approach works. When I slide the toggle to on from settings it immediately jumps back to off.
Click to expand...
Click to collapse
Reboot
overground said:
Reboot
Click to expand...
Click to collapse
Tried that already.
rschouten said:
Tried that already.
Click to expand...
Click to collapse
Hmmm. That sucks.
A reboot always fixes it when mine does that.
I'll let you know if I find anything else.
overground said:
Hmmm. That sucks.
A reboot always fixes it when mine does that.
I'll let you know if I find anything else.
Click to expand...
Click to collapse
Ok, let me know if there is any information that I can provide. I am running the stock ROM from 2014120. With the patch from Loki.
rschouten said:
Ok, let me know if there is any information that I can provide. I am running the stock ROM from 2014120. With the patch from Loki.
Click to expand...
Click to collapse
Do you have recovery?
If you have recovery, wipe cache and dalvik cache and then try...
You could have same problems like many other.
If wiping won't to the job, it could be hardware issue, maybe to open it and check connections.
But contact Loki first...maybe he has better idea...
Sent from my C6903 using Tapatalk
rschouten said:
Ok, let me know if there is any information that I can provide. I am running the stock ROM from 2014120. With the patch from Loki.
Click to expand...
Click to collapse
Loki suggested on G+ to try disabling Quick Boot, then rebooting.
It's in Settings>System>Accessibility
Yes, you have to turn off quick boot to recover bluetooth, or pull the battery or let the battery run all the way down. Otherwise it doesn't really reboot, and Bluetooth will still not work.
Sent from my Nexus 5 using Tapatalk
Has anyone had any luck with the Network Access Point service unavailable problem yet? I have never been able to connect via Bluetooth to my TS.
Sent from my GT-I9300 using xda app-developers app
overground said:
Loki suggested on G+ to try disabling Quick Boot, then rebooting.
It's in Settings>System>Accessibility
Click to expand...
Click to collapse
Just for reference. This did solve the problem. I am now back up and running. In regards to network access unavailable I had solved that with mine since I have it paired with Glass I had to enable bluetooth tethering. Then the error went away then the problem is that it always asked to connect and I had to manually disconnect it otherwise it would severely drain my battery.
I have also tried enabling Bluetooth tethering but still cannot connect. I don't seem to be able to connect with my laptop either. I can't send files at all. I might just have to be patient and wait for an update.
I am using the latest cm nightlies and Ubuntu 13.10 if it makes any difference.
Sent from my GT-I9300 using xda app-developers app
sevs3 said:
I have also tried enabling Bluetooth tethering but still cannot connect. I don't seem to be able to connect with my laptop either. I can't send files at all. I might just have to be patient and wait for an update.
I am using the latest cm nightlies and Ubuntu 13.10 if it makes any difference.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Tethering is broken. At this time, with the poor base firmware Omate (and others like SimValley) is being given to work with. we get BT audio and not much else.
Lokifish Marz said:
Tethering is broken. At this time, with the poor base firmware Omate (and others like SimValley) is being given to work with. we get BT audio and not much else.
Click to expand...
Click to collapse
I have had Bluetooth tethering working on my stock omate and with the custom rom. I have it connected to my google glass as just a headset and with bluetooth data connection. I cannot get the my glass app to recognize it but I can get the internet sharing working over bluetooth.
rschouten said:
I have had Bluetooth tethering working on my stock omate and with the custom rom. I have it connected to my google glass as just a headset and with bluetooth data connection. I cannot get the my glass app to recognize it but I can get the internet sharing working over bluetooth.
Click to expand...
Click to collapse
That's the only tethering that works. Can't do it they other way (x201 > phone > internet) so it's still broken really.
Lokifish Marz said:
That's the only tethering that works. Can't do it they other way (x201 > phone > internet) so it's still broken really.
Click to expand...
Click to collapse
I see. So it can provide bluetooth tethering but not consume it.
Iconbit Callisto
I've heard that this watch and the TS is pretty much the same watch. I'm having trouble with connecting with BT with my HTC One XL. I tried connecting a BT headset to it and it paired and connected. When I tried my laptop and my phone, they pair, but immediately disconnect; or rather, they don't connect at all in the first place. Has anyone had, and resolved, this issue with the Omate?
The BT issues affect ALL x201 smartwatches. So if it gets fixed on any x201, this forum will go nuts with folks applying the fix.
Lokifish Marz said:
The BT issues affect ALL x201 smartwatches. So if it gets fixed on any x201, this forum will go nuts with folks applying the fix.
Click to expand...
Click to collapse
I saw a video from Cnet with the Omate and that BT icon at the top of the screen showed that it was connected... Can the TS's the people on XDA at least connect to their phones through BT or is that an on & off thing for all of these watches? Ugh.. I wish I was proficient at programming and other things so that I could help out with designing ways to improve on these smartwatches...
htcfan85 said:
I saw a video from Cnet with the Omate and that BT icon at the top of the screen showed that it was connected... Can the TS's the people on XDA at least connect to their phones through BT or is that an on & off thing for all of these watches? Ugh.. I wish I was proficient at programming and other things so that I could help out with designing ways to improve on these smartwatches...
Click to expand...
Click to collapse
Me too! I really don't want to bother with adding a SIM card. The watch is great but I'd really want to use it with internet connectivity. Just curious... if this does work... will it affect my data plan same way as a hot spot? Sorry if its a newbie question.
bluetooch
syounger64 said:
Me too! I really don't want to bother with adding a SIM card. The watch is great but I'd really want to use it with internet connectivity. Just curious... if this does work... will it affect my data plan same way as a hot spot? Sorry if its a newbie question.
Click to expand...
Click to collapse
petite question l icone dans la barre des notifications du bluetooch doit étre bleu quant il est activer ?
Hi guys,
My dad has a C5 Ultra and for some strange reason, the data turns on briefly and shuts down again. Is there a way to stop this. He is charged 0.04 Paise every time this happens. And It happens every half an hour.
. Plz help
Turn location off , strange app uses packet data even if it is off or you are connected to wifi
X0LARIUM said:
Hi guys,
My dad has a C5 Ultra and for some strange reason, the data turns on briefly and shuts down again. Is there a way to stop this. He is charged 0.04 Paise every time this happens. And It happens every half an hour.
. Plz help
Click to expand...
Click to collapse
same with mine, i have this phone 2 weeks ago.. until now i haven't found the solution
i wish i hope here i'll find the solution
alifatic said:
same with mine, i have this phone 2 weeks ago.. until now i haven't found the solution
i wish i hope here i'll find the solution
Click to expand...
Click to collapse
I simply removed all the VPN saved. It helped. But now I won't be able to connect to the internet at all. That's fine with me. You can try what the above user has suggested ...try to shut Location. See if it works.
Thanks.
I had this issue, turns out it was an app from the carrier that forces to connect through mobile data connection to check for status or something.
I just uninstall the app and use their mobile web instead, it's been fine since
Sent from my iPad using Tapatalk
X0LARIUM said:
I simply removed all the VPN saved. It helped. But now I won't be able to connect to the internet at all. That's fine with me. You can try what the above user has suggested ...try to shut Location. See if it works.
Thanks.
Click to expand...
Click to collapse
malih16 said:
I had this issue, turns out it was an app from the carrier that forces to connect through mobile data connection to check for status or something.
I just uninstall the app and use their mobile web instead, it's been fine since
Sent from my iPad using Tapatalk
Click to expand...
Click to collapse
thank u so much all of your suggestion i've done and successfull blocking any mobile data internet from my phone
and i added restriction app background data each running apps that consume internet through mobile data,:victory::victory:
During set up you are asked if you would like to allow apps to access to data even when turned off you need to un-check that option.
I come from Italy and I updated my device on March, as everyone, I think. My device is now perfect except the wifi. The wifi disconnect during the stanby and it connects only using the static mode. I also have this problem even if I changed the wifi option for the stanby in "always". Another strange thing is that the wifi is reported as one of the main cause of consumption, as it is shown in the screeshot
I'm having WiFi issues as well since MM. It's set to Active on Sleep, but whenever I wake my tablet, it's disconnected and having much difficulties to re-connect.
I assumed it was some Xposed thing I'm running, haven't tested it 'clean'. Also, I'm on AndroPlusKernel v22. Not v22a yet.
presofista said:
I come from Italy and I updated my device on March, as everyone, I think. My device is now perfect except the wifi. The wifi disconnect during the stanby and it connects only using the static mode. I also have this problem even if I changed the wifi option for the stanby in "always". Another strange thing is that the wifi is reported as one of the main cause of consumption, as it is shown in the screeshot
Click to expand...
Click to collapse
Hi,
For the static mode try to change the DHCP client in the setting->developpers option.
Where are the developper options?
presofista said:
Where are the developper options?
Click to expand...
Click to collapse
In setting->about the tablet -> tap 7 or 8 times to the build number and developpers options Will be enabled
presofista said:
The wifi disconnect during the stanby
Click to expand...
Click to collapse
Same problem here
Version .163
Stock kernel
Wifi standby settings to "always"
5Ghz wifi
Sometimes (not always) wifi disconnected after standby
DHCP working here
Maybe it is linked to wifi router problems during standby. I had wifi problems already before MM (! sign at wifi symbol). Maybe the difference now is that it isn't reconnecting in standby anymore after wifi failure. But just a guess...
At least it's not how option "always" should work...
allofmex said:
Same problem here
Version .163
Stock kernel
Wifi standby settings to "always"
5Ghz wifi
Sometimes (not always) wifi disconnected after standby
DHCP working here
Maybe it is linked to wifi router problems during standby. I had wifi problems already before MM (! sign at wifi symbol). Maybe the difference now is that it isn't reconnecting in standby anymore after wifi failure. But just a guess...
At least it's not how option "always" should work...
Click to expand...
Click to collapse
Hi,
Maybe it's related to your router lease time that send a new DHCP address after lease time. Check if the lease time is set to "permanent"
killdozer56 said:
Hi,
Maybe it's related to your router lease time
Click to expand...
Click to collapse
Thanks for reply. It's set to three weeks, so not the reason.
(But even then it must renew the lease and not stop the wifi.)
I'll get new router soon, let's see if something changes...
allofmex said:
Thanks for reply. It's set to three weeks, so not the reason.
(But even then it must renew the lease and not stop the wifi.)
I'll get new router soon, let's see if something changes...
Click to expand...
Click to collapse
I have the same issue but I actually have the turn off wifi in sleep enabled but it still shows up that its being used in sleep when I look at battery
The problem:?*
I connect it to the Wi-Fi and it works fine for about 5 minutes. As I'm watching YouTube videos every 5 minutes the video pauses and starts to buffer until it eventually say connection lost. Meanwhile the tablet still claims that Wi-Fi is still connected and with full connection. This also happens with web pages and apps that require and internet connection.
Temporary fix:
Turning Wi-Fi off and back on again fixes it, but only for a few minutes.
What have I tried to fix it?
I've tried everything from a factory reset to a software repair.
OS: Android 6.0 (Marshmallow)?*
Build Number: 32.1.A.1.185
Any help would be much appreciated. Thanks in advanced.
ElPatron17 said:
The problem:?*
I connect it to the Wi-Fi and it works fine for about 5 minutes. As I'm watching YouTube videos every 5 minutes the video pauses and starts to buffer until it eventually say connection lost. Meanwhile the tablet still claims that Wi-Fi is still connected and with full connection. This also happens with web pages and apps that require and internet connection.
Temporary fix:
Turning Wi-Fi off and back on again fixes it, but only for a few minutes.
What have I tried to fix it?
I've tried everything from a factory reset to a software repair.
OS: Android 6.0 (Marshmallow)?*
Build Number: 32.1.A.1.185
Any help would be much appreciated. Thanks in advanced.
Click to expand...
Click to collapse
You know I had this problem even on lollipop. I sent my tab off for repair and they said nothing was wromg with it.
RJASSI21 said:
You know I had this problem even on lollipop. I sent my tab off for repair and they said nothing was wromg with it.
Click to expand...
Click to collapse
Same I was having it on lollipop too. They told me to send it in for repair but I just ignored them cuz there's no point. It's a software issue not a hardware issue. They're not going to find anything wrong with my tablet. It's in perfect condition.
ElPatron17 said:
Same I was having it on lollipop too. They told me to send it in for repair but I just ignored them cuz there's no point. It's a software issue not a hardware issue. They're not going to find anything wrong with my tablet. It's in perfect condition.
Click to expand...
Click to collapse
ill be honest i genuinley thought that my hardware was playing up lol thanks for clarifying this haha.
RJASSI21 said:
ill be honest i genuinley thought that my hardware was playing up lol thanks for clarifying this haha.
Click to expand...
Click to collapse
???? Na bro you're hardware is most likely perfectly fine. Sony just needs to fix the software and we're good.
Anyone having trouble with their bluetooth staying on? Mine continuously shuts off on its own, even while in use (streaming audio etc). I added the exception to the battery optimization just in case, but no change. Just wondering if any others are having that problem or have a possible solution? Possibly a hardware problem with my phone?
I set up a tasker profile to log each time it shuts off and turn it back on, and its almost exactly every 20 minutes. Sometimes it will stay on for a couple hours, but then it starts on the 20 minute cycle again.
Getting frustrated when streaming audio in the car and I also use Tile which needs bluetooth on to track. I have a Verizon G5 if that matters
Hum that is weird do you have an android wear device connected to the phone? If so add the ignore optimizations with that app and if you don't the maybe a factory reset might help and if that doesn't then idk what will.
Sent from my LG-H820 using XDA-Developers mobile app
Got the solution from a user on Reddit, it was the Tile app setting to "auto-repair connection issues", turned that off and Bluetooth works fine.
I got mine yesterday and didn't face your problem. Maybe you should also check the Bluetooth device.
rdesai84 said:
Got the solution from a user on Reddit, it was the Tile app setting to "auto-repair connection issues", turned that off and Bluetooth works fine.
Click to expand...
Click to collapse
Where does one find this for other people to see?
I am having constant dropping of my phone audio with my car BT. It will cut out for several seconds, the radio audio will come back, and then the phone will come back. I do not have the Tile app. I am wondering if the VoLTE (voice over LTE) might have something to do with it but that is pure uninformed speculation. I just disabled VoLTE so I can try it later in my car.
Looks like my hunch may have been right. There seems to be a problem on Marshmallow with Bluetooth:
http://www.androidpolice.com/2015/1...ed-on-all-four-nexus-phones-with-marshmallow/
http://forums.androidcentral.com/samsung-galaxy-s6-edge/516860-dropped-call-issues.html
rdesai84 said:
Got the solution from a user on Reddit, it was the Tile app setting to "auto-repair connection issues", turned that off and Bluetooth works fine.
Click to expand...
Click to collapse
Really?!! Trying that now.
If that is is the case, it didn't do it before the Marshmallow upgrade.
Thanks, I'll let you know if it works.
Just to update- disabling VoLTE seems to have completely resovled my problem of phone audio constantly dropping off and on.
Sent from my K00C using Tapatalk
[SOLVED] Bluetooth won't stay on
rdesai84 said:
Got the solution from a user on Reddit, it was the Tile app setting to "auto-repair connection issues", turned that off and Bluetooth works fine.
Click to expand...
Click to collapse
This fixed my issue. I complained to Tile that they had not alerted Tile users that the Tile App is not compatible with Marshmallow v6.0 and that the auto-repair connection would effect the Bluetooth connections on the phone.
I nearly replaced my phone because I could not find what was causing the issue.
Thanks you rdesai84!:good:
---------- Post added at 10:05 PM ---------- Previous post was at 10:01 PM ----------
bolillo said:
Where does one find this for other people to see?
Click to expand...
Click to collapse
https://www.reddit.com/r/lgg4/comments/4gf8er/psa_if_your_g4s_bluetooth_has_been_randomly/
It is my understanding that the Zen2 using only a wifi connection can send texts, do "OK Google", and perform other data related functions even if not connected to a phone (i.e. if phone has both bluetooth and wifi off, or is not in proximity to the watch nor on the same wifi network). Is that the case? Does the phone need to at least be connected to cellular data, or can the watch still communicate over wifi even if the phone has no data connection (or is completely off)?
Regarding the speaker: I know that the Zen2 can play music stored on the phone. But, is there any way (or app) to stream music (or video such as youtube) on the watches speaker without being connected to the phone (watch is only connected to a wifi network)?
Lastly, what about phone calls? Is there any way for the watch to receive/make a phone call "independently" of the phone if the watch is only connected to wifi? If not, what about receiving or making a "data only" call (such as using Hangouts)?
TIA!
1. Watch must be connected to phone.
2. No.
3. No.
Sent from my Nexus 6 using Tapatalk
You can play YouTube videos (there is an app in the store). But I can't remember if it works on Bluetooth only. The downside is it seems to buffer the whole video before it starts, which took a while with my slow connection.
Sent from my SM-G935F using XDA-Developers mobile app
So what is the point of having wifi on the watch if it still needs to be connected to the phone? I don't get it.
CentralVAHere said:
So what is the point of having wifi on the watch if it still needs to be connected to the phone? I don't get it.
Click to expand...
Click to collapse
I still get notifications via wifi if my phone isnt in bluetooth range.
ok google seems to work half the time for me, but only on 2.4ghz networks. They have to be public (w/o a portal that makes you accept terms of use) or ones youve used on your phone (the watch gets the wifi password from your phone)
slothdabski said:
I still get notifications via wifi if my phone isnt in bluetooth range.
ok google seems to work half the time for me, but only on 2.4ghz networks. They have to be public (w/o a portal that makes you accept terms of use) or ones youve used on your phone (the watch gets the wifi password from your phone)
Click to expand...
Click to collapse
Hmmm, I am connected to my wifi router, with phone off. I sent myself an email but no notification. I try "okay google" but nothing but the watch saying I'm disconnected.
CentralVAHere said:
Hmmm, I am connected to my wifi router, with phone off. I sent myself an email but no notification. I try "okay google" but nothing but the watch saying I'm disconnected.
Click to expand...
Click to collapse
Make your WiFi is set to automatic (on watch/wear) and you have cloud sync turned on
Sent from my Nexus 6 using Tapatalk
slothdabski said:
Make your WiFi is set to automatic (on watch/wear) and you have cloud sync turned on
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
Okay I have both cloudsync enabled (on phone's Wear app) and wifi set to automatic but still nothing. No email notifications and I have the crossed-out cloud icon on my phone. Perhaps the wear server is not working for me?
Did you just enable those settings now? If so, it probably takes some time to transmit the new info and WiFi password via slow Bluetooth. Leave you watch connected via Bluetooth and try again later.
I haven't tried to observe and test myself, but I would imagine there is some lag with getting the notifications since the watch connects and disconnects from WiFi periodically to save battery, as opposed to staying on WiFi constantly
Sent from my Nexus 6 using Tapatalk
slothdabski said:
Did you just enable those settings now? If so, it probably takes some time to transmit the new info and WiFi password via slow Bluetooth. Leave you watch connected via Bluetooth and try again later
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
No it's been setup for a while like that. I just now turned off sync, and unpaired my watch. I'm going to start from scratch, pair the watch and then turn on cloud sync and see where it gets me. Thanks for your help!
CentralVAHere said:
No it's been setup for a while like that. I just now turned off sync, and unpaired my watch. I'm going to start from scratch, pair the watch and then turn on cloud sync and see where it gets me. Thanks for your help!
Click to expand...
Click to collapse
OK, also check my previous post edit about lag due to battery saving on watch
Sent from my Nexus 6 using Tapatalk
Additionally, when you turn wifi on automatic on the watch, stay on that screen until the wifi connects. Once it does, you can adjust the wifi sleep preferences from the advanced menu.
Sent from my SM-N910P using Tapatalk
zenwatch 2 issues
hamagc said:
Additionally, when you turn wifi on automatic on the watch, stay on that screen until the wifi connects. Once it does, you can adjust the wifi sleep preferences from the advanced menu.
Sent from my SM-N910P using Tapatalk
Click to expand...
Click to collapse
I really would like to see an accurate list of what the Zenwatch 2
is capable of doing if I were to disable bluetooth on my phone &
only use the wifi feature in the phone and the watch.
I know I will not be able to make or receive phone calls if I do that.
But what about all the other functions of the watch?
Will wifi stay enabled in the watch if the bluetooth on my phone is disabled?
-----
Also I still have not found a way to sync/pair my watch to my phone without having to "unpair" after flashing
or restoring a different rom in my phone and setting up all the wear apps, android wear app and all the other
apps and settings which needs to be setup in the phone. (even after I reboot the watch and the phone)
The only solution I found was to "unpair" (factory reset the watch)
and after doing that the phone pairs just fine with anderoid wear
and starts the very long syncing process.
There must be some way of pairing and syncing the watch to the
phone without having to "unpair" it and start from scratch.
Thanks!
Misterjunky said:
I really would like to see an accurate list of what the Zenwatch 2
is capable of doing if I were to disable bluetooth on my phone &
only use the wifi feature in the phone and the watch.
I know I will not be able to make or receive phone calls if I do that.
But what about all the other functions of the watch?
Will wifi stay enabled in the watch if the bluetooth on my phone is disabled?
-----
Also I still have not found a way to sync/pair my watch to my phone without having to "unpair" after flashing
or restoring a different rom in my phone and setting up all the wear apps, android wear app and all the other
apps and settings which needs to be setup in the phone. (even after I reboot the watch and the phone)
The only solution I found was to "unpair" (factory reset the watch)
and after doing that the phone pairs just fine with anderoid wear
and starts the very long syncing process.
There must be some way of pairing and syncing the watch to the
phone without having to "unpair" it and start from scratch.
Thanks!
Click to expand...
Click to collapse
Look for "reset wear client" apk here on XDA. It allows you to re-pair watch to different devices or different ROMs on same device without factory resetting
Sent from my Nexus 6 using Tapatalk
re: will try OK.
slothdabski said:
Look for "reset wear client" apk here on XDA. It allows you to re-pair watch to different devices or different ROMs on same device without factory resetting
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
Thanks,, that sounds great but can you please tell me the exact name of that
app in the play store, I did a play store search for "Reset wear client" but I
could not find anything even similar to that name.
Thanks again!
Misterjunky said:
Thanks,, that sounds great but can you please tell me the exact name of that
app in the play store, I did a play store search for "Reset wear client" but I
could not find anything even similar to that name.
Thanks again!
Click to expand...
Click to collapse
Its not in play store
http://forum.xda-developers.com/and.../app-reset-wear-client-switch-phones-t3058962
Sent from my Nexus 6 using Tapatalk
slothdabski said:
Its not in play store
http://forum.xda-developers.com/and.../app-reset-wear-client-switch-phones-t3058962
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
The ADB commands don't work at all, and after much reading in that thread you
posted I finally found out why it's not working for me.
I have upgraded my zenwatch 2 to Marshmallow 6.0 a few weeks ago and I got another
small ota update a few days ago which upgraded the OS version from v1.4 to v1.5 ...
So I am back at square one.
I am not interested in using more than one phone (S7 Edge) with my watch.
The only thing I need is a way to pair and sync my watch without needing to do a
"unpair-device" each time I use twrp to restore a different nandroid backup of my
phone's custom rom or simply restore the same custom rom both of which has
already been fully paired and synced with the watch.
Misterjunky said:
The ADB commands don't work at all, and after much reading in that thread you
posted I finally found out why it's not working for me.
I have upgraded my zenwatch 2 to Marshmallow 6.0 and a few weeks ago and I
got another small ota update which upgraded the OS version from v1.4 to v1.5 ...
So I am back at square one.
I am not interested in using more than one phone (S7 Edge) with my watch.
The only thing I need is a way to pair and sync my watch without needing to do a
"unpair-device" each time I use twrp to restore a different nandroid backup of my
phone's custom rom or simply restore the same custom rom both of which has
already been fully paired and synced with the watch.
Click to expand...
Click to collapse
Your watch should stay paired after an update unless you wipe the data partition, or unlock the bootloader which wipes the data partition
Sent from my Nexus 6 using Tapatalk
slothdabski said:
Your watch should stay paired after an update unless you wipe the data partition, or unlock the bootloader which wipes the data partition
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
My problem has nothing to do with any updates.
Please read my original post a couple of posts back.
Thanks.
Sent from my SM-G935F using Tapatalk
Misterjunky said:
My problem has nothing to do with any updates.
Please read my original post a couple of posts back.
Thanks.
Sent from my SM-G935F using Tapatalk
Click to expand...
Click to collapse
I think that apk I linked to addresses the issue in your original post. Install the apk on your phone and it will load the app on to your watch. Once you need to setup your watch with a new phone or ROM, open the reset wear client on your watch. Click the "reset gms" button (root required). This will reboot your watch. Now your watch is ready to be paired to a new ROM or device without a factory reset or re-syncing of apps. Open the reset wear client app on your watch and click make BT discoverable. Then click yes. Now you can open android wear app on your phone and click on your watch. It will say pairing complete and updating. At this point you will reboot both your phone and watch. Then they should both connect fine and function without having to reset or re-sync your watch apps
Sent from my Nexus 6 using Tapatalk