So after updating my bootloader to the new version so I can run Android Nougat however I wasn't getting any LTE connection and decided to restore the EFS backup I had from android MM.
My phone started having problem more problems (SIM card not being detected) and I decided to run the OPX recovery and switch back to default.
However this resulted in my bootloader getting locked for some reason and whenever I try to reboot my phone the screen is black and the LED indicator turns white.
I can boot into the factory OPX recovery but I'm forced to use the volume and lock buttons because I can't use my touchscreen whilst using this (no idea whether this is normal).
I can still boot into fastboot mode and have tried to sideload a new ROM however this has been to no avail.
Hey, I got that exact same problem. All was fine, did a backup and wiped as every time to try out a new rom. It boot normaly and was tweaking the rom. Then I decided to restore my backup, wiped as every time and restored my backup. Till then my SIM card is not being detected and some strange things happend like I couldn't enter the recovery with advanced reboot. After that I followed the unbrick guide and my bootloader is also locked but could not boot into the rom. After bootscreen the screen is black and the LED turns white. I can also boot into the factory OPX recovery.
What happened here? Anyone some ideas?
I had the same problem, I had to trick oneplus-support to do it on warranty, see http://forum.xda-developers.com/showpost.php?p=70182036&postcount=16 and http://forum.xda-developers.com/showpost.php?p=70184136&postcount=18
Today I got my phone back with a new mainboard.
Hmm, okay thanks for your reply. But is it really a hardware problem? It sounds weird but maybe replacement is a way...
It strange, since I had the problem with my phone there are 3-4 new threads now in this forum were people have exactly this problem, black screen with white led.
I will not flash my phone again in the foreseeable future and just use gravitybox instead.
Mutchatcho said:
Hey, I got that exact same problem. All was fine, did a backup and wiped as every time to try out a new rom. It boot normaly and was tweaking the rom. Then I decided to restore my backup, wiped as every time and restored my backup. Till then my SIM card is not being detected and some strange things happend like I couldn't enter the recovery with advanced reboot. After that I followed the unbrick guide and my bootloader is also locked but could not boot into the rom. After bootscreen the screen is black and the LED turns white. I can also boot into the factory OPX recovery.
What happened here? Anyone some ideas?
Click to expand...
Click to collapse
I did the exact same thing as you and ended up in this situation.
adefigo said:
I had the same problem, I had to trick oneplus-support to do it on warranty, see http://forum.xda-developers.com/showpost.php?p=70182036&postcount=16 and http://forum.xda-developers.com/showpost.php?p=70184136&postcount=18
Today I got my phone back with a new mainboard.
Click to expand...
Click to collapse
How did you unlock the bootloader or even install KingRoot? The problem is that my bootloader is locked, that I have no way to unlock it, no proper recovery and that I can't boot into my ROM.
Also does anyone know whether Simplesurance would cover my phone? Since it does state it covers "incorrect use" (or something along those lines).
Miniheadshot said:
How did you unlock the bootloader or even install KingRoot? The problem is that my bootloader is locked, that I have no way to unlock it, no proper recovery and that I can't boot into my ROM.
Also does anyone know whether Simplesurance would cover my phone? Since it does state it covers "incorrect use" (or something along those lines).
Click to expand...
Click to collapse
With the new mainboard and the new rom build, it is impossible to use twrp or root. I didn't know that when I wrote I would be using gravitybox from now on and not flash custom roms again.
Just a quick update. Got my phone back and they also replaced the mainboard. It's now on the latest OOS but I can do everything as before. So hopefully it will survive longer as before - what ever it was...
Mutchatcho said:
Just a quick update. Got my phone back and they also replaced the mainboard. It's now on the latest OOS but I can do everything as before. So hopefully it will survive longer as before - what ever it was...
Click to expand...
Click to collapse
What is your built number?
adefigo said:
What is your built number?
Click to expand...
Click to collapse
You mean build number of OOS? Honestly don't know cause I directly flashed AOSPExtended + Arsenic. :silly: but was the v3.1.4.
Mutchatcho said:
You mean build number of OOS? Honestly don't know cause I directly flashed AOSPExtended + Arsenic. :silly: but was the v3.1.4.
Click to expand...
Click to collapse
There are two v3.1.4 builds, ONE E1003_14_161107 and E1003_15_161107. My new Mainboard came with the latter and now twrp doesn't find any partition. So no root or custom rom for me any more.
adefigo said:
There are two v3.1.4 builds, ONE E1003_14_161107 and E1003_15_161107. My new Mainboard came with the latter and now twrp doesn't find any partition. So no root or custom rom for me any more.
Click to expand...
Click to collapse
Ah okay, I didn't know that. Obviously then I got maybe the other one.. but not sure if this makes the difference.
What you guys are describing as a common flash of new ROM and wipe to restore backup sounds like something's left out. Did you change twrp versions between flashing and restoring? Was your backup with 3.0.2 twrp and new flash with 3.0.3?
Cause these issues usually occur when recovery versions change
dchrono said:
What you guys are describing as a common flash of new ROM and wipe to restore backup sounds like something's left out. Did you change twrp versions between flashing and restoring? Was your backup with 3.0.2 twrp and new flash with 3.0.3?
Cause these issues usually occur when recovery versions change
Click to expand...
Click to collapse
No, did not change twrp versions during flashing new ROM and wipe to restore backup. Don't know if I remember correctly but I think I was on Bluesparks twrp (was it 3.0.0?) and did not change that during the processes.
i also had same problem
i try to update my twrp recovery with flashify. it was successful but now i cant boot into recovery. i dnt know bootloader is locked or not. i can use many fastboot commands like fastboot reboot-bootloader, fastboot continue. please help me. i try many times to update or remove twrp but nothing happend. rom is working.
Damn, same problem here. I tired to flash a new ROM (the android base for SailfishOS 2) and it failed, was getting late so I decided to restore the backup I just made (the backup had everything selectable in twrp including EFS backed up). After rebooting the sim, sd card and wifi didnt work, so I tried re-restoring EFS, wiping, formatting and wipe+flashing various ROMs all with a still unrecognised sim. Finally I decided I had enough a used the MsmDownloadTool, but it softbricked my phone with the blank screen and white LED if I try to boot into system.
I never changed twrp version during this until it was removed by MsmDownloadTool.
I also noticed that adb sideloading using OOS's old stock recovery with a OOS OTA zip doesnt work, it either gets stuck at logo or loops. Sideloading newer OTA zips kills the phone more because I tried to flash a MM zip and found that recovery no longer works. I've tried redownloading the MsmDownloadTool package and using this other modified MsmDownloadTool here a few replies down https://forum.xda-developers.com/oneplus-x/general/guide-mega-unbrick-guide-hard-bricked-t3272108
Another thing I noticed is that windows detects a bunch of unreadable local drives, with one readable containing only an 'images' folder, with useful-looking stuff like adsp.b00, adsp.b01 all the way to adsp.b12 and also .mbt files. I can provide the full list if it's useful. It's also detected in the device manager as "Marshall London HS-USB Diagnostics 9006 (COM6)" under Ports.
I really hope that I don't need to send this phone back to oneplus.
Clae said:
Damn, same problem here. I tired to flash a new ROM (the android base for SailfishOS 2) and it failed, was getting late so I decided to restore the backup I just made (the backup had everything selectable in twrp including EFS backed up). After rebooting the sim, sd card and wifi didnt work, so I tried re-restoring EFS, wiping, formatting and wipe+flashing various ROMs all with a still unrecognised sim. Finally I decided I had enough a used the MsmDownloadTool, but it softbricked my phone with the blank screen and white LED if I try to boot into system.
Click to expand...
Click to collapse
Exactly what I did and what happened to my phone. I had to send it back to repair and got it back with a new mainboard in a state that I cannot use twrp any more.
adefigo said:
There are two v3.1.4 builds, ONE E1003_14_161107 and E1003_15_161107. My new Mainboard came with the latter and now twrp doesn't find any partition. So no root or custom rom for me any more.
Click to expand...
Click to collapse
Did you try to adb sideload flash the 3.1.4 on the 14 version?
Clae said:
Damn, same problem here. I tired to flash a new ROM (the android base for SailfishOS 2) and it failed, was getting late so I decided to restore the backup I just made (the backup had everything selectable in twrp including EFS backed up). After rebooting the sim, sd card and wifi didnt phone back to oneplus.
Click to expand...
Click to collapse
I had flashed a ROM and wanted to restore a backup of MOOS. The back up restored no problem but when I booted it wouldn't detect sim trays and no wifi. When I typed *#06# no iemi's and finally when I checked about phone I had no baseband. I had a back up of efs and persist but wouldnt help. If this sounds like your issue or if anyone's having this problem its actually easy fix. With adb commands had to delete modem1 and modem2 files. I had my doubts but after reboot sims trays detected, wifi and iemi's restored.
Related
I'm trying to get the user files off a phone with corrupted cache. When booted normally, it gets stuck on the white T-Mobile splash screen. When booting into recovery, I get an error about the cache and the phone restarts without loading into recovery. Screenshots attached.
I can get into download mode fine.
Using Odin to flash a custom recovery gives me the PASS message, but when I restart the phone, the stock recovery is still there with the same error message. I've tried TWRP and CWM.
I am hesitant to try flashing a custom ROM because I don't want to lose the data. The phone is not important, but the data is.
firstrival said:
I'm trying to get the user files off a phone with corrupted cache. When booted normally, it gets stuck on the white T-Mobile splash screen. When booting into recovery, I get an error about the cache and the phone restarts without loading into recovery. Screenshots attached.
I can get into download mode fine.
Using Odin to flash a custom recovery gives me the PASS message, but when I restart the phone, the stock recovery is still there with the same error message. I've tried TWRP and CWM.
I am hesitant to try flashing a custom ROM because I don't want to lose the data. The phone is not important, but the data is.
Click to expand...
Click to collapse
Dont try flashing a custom ROM on to the phone. Try flash the stock ROM through the lastest odin with the lastest drivers and let me know how that works out for ya. Unless that wipes the phone ( havent used it in quite some time) then I have no idea man.
I tried flashing the T399UVUAMJ4 ROM throught Odin. It went through the entire process and rebooted, but nothing changed. Does this mean the bootloader is locked?
firstrival said:
I tried flashing the T399UVUAMJ4 ROM throught Odin. It went through the entire process and rebooted, but nothing changed. Does this mean the bootloader is locked?
Click to expand...
Click to collapse
I'm not sure maybe want to ask someone else I'm not as experienced as some people on here. Sorry man goodluck
I hope someone can help you out. I would say your cache partition somehow got renamed but I'm not sure if thats possible and if so how to fix it. Maybe someone with ADB knowledge can help?
Also what TWRP were you trying to install? I've had problems when I tried to flash older versions
okay so here is a site with the original firmware for the phone. It has both the t399 and the t399n for odin. It has them labeled so its not too confusing lol. http://forum.gsmhosting.com/vbb/f200/samsung-t399n-metro-pcs-firmware-here-1899016/
find the one for the t399, flash it with odin. this will fully restore your phone. HOPEFULLY it will be able to save the data. I know you said you did this before but I'm not sure if it was just system or everything like here.
kireflow90 said:
okay so here is a site with the original firmware for the phone. It has both the t399 and the t399n for odin. It has them labeled so its not too confusing lol. http://forum.gsmhosting.com/vbb/f200/samsung-t399n-metro-pcs-firmware-here-1899016/
find the one for the t399, flash it with odin. this will fully restore your phone. HOPEFULLY it will be able to save the data. I know you said you did this before but I'm not sure if it was just system or everything like here.
Click to expand...
Click to collapse
So I tried the T399 files. Flashed with no errors, but when it reboots everything is still the same. I've even tried flashing from another computer. Mind boggling!
firstrival said:
So I tried the T399 files. Flashed with no errors, but when it reboots everything is still the same. I've even tried flashing from another computer. Mind boggling!
Click to expand...
Click to collapse
Thanks for the quick reply. Its a shame to hear that it didn't work
How did you come to this? as to me it seems the partions have be modified hence why giving those errors I seen similar errors to when users change cache sizes which tends to brick device or from using incorrect pit files.
You never be able to recover data from flashing Odin may be slim chance by custom Rom thru recovery if was a bkup of original system and not selecting data your old data may conflict causing either bootloop or basically stuck on splash screen.
If you was ever able to best way to pull data from device would be thru adb may have a chance.
This phone belongs to a friend of a friend. They said they brought it to T-Mo because it hung up during boot. The store worked on it for a few minutes, but couldn't get it to boot up either. When I tried to go into recovery, they said the store already went into that screen too. They have since bought a new phone, but would like to get the photos off it if possible. They never had an SD card so it's still on the device.
At the moment, I can just go into download mode. I was hoping to flash a custom recovery so I might possibly be able to ADB from there since it won't load the stock recovery.
I have a very similar issue but without "cache error messages". The phone (Samsung Galaxy Light with stock ROM and TWRP) just reboots no matter what I try to flash into it.
It does it while "drawing" the Samsung Logo animation (blue ring that gets created revealing the word samsung), so after the white wrintings of the phone name.
My attempts so far:
1. Flashed newer version of TWRP
2. Flashed CWM
3. Flashed two different versions of stock ROM (the original one and the one that T-Mobile released when upgraded to latest jelly Bean)
4. Flashed a custom ROM (Light ROM found here which is based on the stock one).
EVERY TIME the outcome was the same:
Phone reboots right after the phone name (written in white) while the Samsung animation starts. It just stops while the blue oval begins to appear. If I try to boot into recovery (via home/power/volume up combo) it shows the TWRP splash screen but it reboots right after and this happened even after I flashed (successfully according to Odin) CWM.
It really looks like I did nothing so far but I can assure it's not the first time I use Odin (4 different versions) to flash a custom recovery or a ROM. I did it successfully on other 4 different phones (all samsung).
On this same phone I did it the first time when flashed TWRP in order to root it via recovery.
I have no idea what to do next. I was thinking about using adb in order to wipe all the caches (dalvik included) but it looks like the phone can't be recognized unless I boot it into recovery mode (adb get-state returns "unknown") and I don't think I can do anything in Download mode which is the only mode I can enter apparently.
I was hoping someone here can help me to spare some money buying a new phone for my wife and tossing this one which is the best for its small size imho.
Thank you in advance to anyone interested in at least shading some light on what could have happened. This started to happen out of the blue and the last time I actively modified something (updating the recovery) was almost one year ago... It always worked like a charm until 4 days ago...
EDIT: To clarify: the reason why I posted here is because this looked like a problem the most similar to mine (boot loop or stuck at boot and can't enter either regular or recovery mode). I cannot create new posts due to my low "rank" yet... Please feel free to move this if you think it belongs to a separate thread.
fulgorevinnie said:
I have a very similar issue but without "cache error messages". The phone (Samsung Galaxy Light with stock ROM and TWRP) just reboots no matter what I try to flash into it.
It does it while "drawing" the Samsung Logo animation (blue ring that gets created revealing the word samsung), so after the white wrintings of the phone name.
My attempts so far:
1. Flashed newer version of TWRP
2. Flashed CWM
3. Flashed two different versions of stock ROM (the original one and the one that T-Mobile released when upgraded to latest jelly Bean)
4. Flashed a custom ROM (Light ROM found here which is based on the stock one).
EVERY TIME the outcome was the same:
Phone reboots right after the phone name (written in white) while the Samsung animation starts. It just stops while the blue oval begins to appear. If I try to boot into recovery (via home/power/volume up combo) it shows the TWRP splash screen but it reboots right after and this happened even after I flashed (successfully according to Odin) CWM.
It really looks like I did nothing so far but I can assure it's not the first time I use Odin (4 different versions) to flash a custom recovery or a ROM. I did it successfully on other 4 different phones (all samsung).
On this same phone I did it the first time when flashed TWRP in order to root it via recovery.
I have no idea what to do next. I was thinking about using adb in order to wipe all the caches (dalvik included) but it looks like the phone can't be recognized unless I boot it into recovery mode (adb get-state returns "unknown") and I don't think I can do anything in Download mode which is the only mode I can enter apparently.
I was hoping someone here can help me to spare some money buying a new phone for my wife and tossing this one which is the best for its small size imho.
Thank you in advance to anyone interested in at least shading some light on what could have happened. This started to happen out of the blue and the last time I actively modified something (updating the recovery) was almost one year ago... It always worked like a charm until 4 days ago...
EDIT: To clarify: the reason why I posted here is because this looked like a problem the most similar to mine (boot loop or stuck at boot and can't enter either regular or recovery mode). I cannot create new posts due to my low "rank" yet... Please feel free to move this if you think it belongs to a separate thread.
Click to expand...
Click to collapse
ok so i read all that you have done which is basically everything i would of suggested to you other then could it be the battery may be faulty just random thought noticed you never mentioned trying kies you may have a chance with it beening detected as i see you can enter download mode so that help with odin also kies also have you tried firmware from here sam mobile here T399 or T399N OH2 lastest for tmo and OH3 for metro.
Try to only flash that thru odin i use 3.07 or 3.09 only difference is the pda button changes to AP .works perfect for me so i suggest it then returning back to stock recovery/firmware if it boots then awesome. then return to TWRP 2.8.4.0 beening lastest for this device also needed for CM12 also my projects for device current and future.
when using odin make sure that only “Auto Reboot” and “F. Reset Time” options are selected.
also just note when going into twrp release buttons as soon as you see logo otherwise it will continue to boot thru well happens to me when daydreaming lol.
also if your seeing this adb get-state returns "unknown" i believe installing kies may install the drivers for detection im not postive on that but im sure it something to do with missing the adb driver for device maybe another dev can confirm this ?
hopefully this may be of some help i keep on thread to see how the outcome goes
Thanks for the reply DJBoxer!
Regarding the battery it's a new one and I can confirm it's not a battery problem considering that the phone can stay in download mode and unplugged from any power source for very long times without turning off/rebooting and it never failed to keep the charge so far. I also tried with the old battery and the phone behaves exactly the same way.
I used 3 different versions of Odin (1.87, 3.07 and 3.09) with only “Auto Reboot” and “F. Reset Time” options selected and every time I got the PASS message even though the phone keeps rebooting after the first reboot once the procedure is terminated.
To clarify one thing : when I said "it shows the TWRP splash screen but it reboots right after and this happened even after I flashed CWM" I meant to point out that it looks odd to see the TWRP splash screen (even for just a few seconds) after I just flashed CWM and that makes me think that I'm really not flashing anything here...
Thank you very much for taking the time of posting the links and I actually didn't try with that latest OH2 version.
I am downloading it right now (it takes a while from sammobile) and I will keep you posted on the outcome.
I will try to flash it via Odin and I'll also try the latest version mentioned on sammobile (Odin3_v3.10.7).
Regarding Kies I wasn't able to have it recognize the phone. I may be missing something but I tried updating drivers and going through all the guided procedures with no luck... If you say it should recognize the phone right away while in download mode then something is amiss.
Could you please confirm that I should also be able to use adb commands with the phone connected via USB in download mode? Cause that doesn't look like the case either...
Thank you again and I'll give updates here about my last attempts.
Sorry for the late reply...
Nothing changed by the way...
I am about to send the phone back to the seller who told me they'll try to fix it. Let's see how it goes.
Hey All,
I've upgraded my 925F to Official MM 6.0.1. Rooted it through kernel Xspace and then installed recovery TWRP_3.0_MM_S6_by_ManhIT
My only concern is when I'm in TWRP I can't reboot, it just freezes.
I can nandroid backup no problem just the reboot part freezes TWRP.
Anyone else had this problem? is there another TWRP to be used?
nb : I tried clearing cache + dalvik, freezes still happen before rebooting.
thanks for ur help.
kaemon said:
Hey All,
I've upgraded my 925F to Official MM 6.0.1. Rooted it through kernel Xspace and then installed recovery TWRP_3.0_MM_S6_by_ManhIT
My only concern is when I'm in TWRP I can't reboot, it just freezes.
I can nandroid backup no problem just the reboot part freezes TWRP.
Anyone else had this problem? is there another TWRP to be used?
nb : I tried clearing cache + dalvik, freezes still happen before rebooting.
thanks for ur help.
Click to expand...
Click to collapse
Try this TWRP form arter... this is the only TWRP being use by many of us here.. you flash it through odin or recovery...
I had the same problem and i solved changing my kernel
Inviato dal mio SM-G925F utilizzando Tapatalk
fabiok81 said:
I had the same problem and i solved changing my kernel
Inviato dal mio SM-G925F utilizzando Tapatalk
Click to expand...
Click to collapse
The issue is not the kernel... its the recovery that doesn't work when reboot to system is touch and is freezing..
Go to advance then terminal
Write reboot
Easy!
Yes i know the iusse is about the recovery but it seems because there is not compatibility between some recovery and some kernel. I tried various recovery 3.0 and i have always a kind of freeze. The TWRP... by Manhit for example gave me freeze with xspace kernel but not with hacker kernel. I don't no the reason....
Inviato dal mio SM-G925F utilizzando Tapatalk
same but different
Hi All,
I'm experiencing a freeze in TWRP after about a few seconds, the whole recovery stands still and this happens every time.
I flashed the Xspace kernel which hasn't help.
The TWRP from arter97 works great, except it doesn't allow me to copy files to my PC using MTP, message says unexpected error.
yet, the ManhIT and Original TWRP allow me to copy data but both of them freeze up after a few seconds which causing the copying to fail.
Reasons I'm doing this is because my SM-G925F start looping and I've tried flashing stock so many times to no avail.
I'm sure all i need to do is data/ factory wipe and my phone will boot fine, I just really need some data before I do that.
Is there perhaps a different kernel I can try?
or if anyone has any suggestions that would be very much appreciated.
Regards
wahwahward said:
Hi All,
I'm experiencing a freeze in TWRP after about a few seconds, the whole recovery stands still and this happens every time.
I flashed the Xspace kernel which hasn't help.
The TWRP from arter97 works great, except it doesn't allow me to copy files to my PC using MTP, message says unexpected error.
yet, the ManhIT and Original TWRP allow me to copy data but both of them freeze up after a few seconds which causing the copying to fail.
Reasons I'm doing this is because my SM-G925F start looping and I've tried flashing stock so many times to no avail.
I'm sure all i need to do is data/ factory wipe and my phone will boot fine, I just really need some data before I do that.
Is there perhaps a different kernel I can try?
or if anyone has any suggestions that would be very much appreciated.
Regards
Click to expand...
Click to collapse
Try with hacker kernel. Wipe cache but not data
callumbr1 said:
Try with hacker kernel. Wipe cache but not data
Click to expand...
Click to collapse
Thanks for your response callumbr1.
I've attempted two different kernels:
g925-hacker-echoe-kernel-V14.zip
hacker-kernel-S6-Universal-V12.zip
Above mentioned problems persist.
Since arter97 TWRP is not freezing on me, if I run a back up on the Data only. Then perform the wipe, the backup should still be there, correct?
and lets say I flash the stock ROM again if necessary and I'm able to boot the device.
Would it be possible to restore that data back up at all ?
or perhaps copy that back up to my PC and access/extract the files with a separate application?
Many Thanks
wahwahward said:
Thanks for your response callumbr1.
I've attempted two different kernels:
g925-hacker-echoe-kernel-V14.zip
hacker-kernel-S6-Universal-V12.zip
Above mentioned problems persist.
Since arter97 TWRP is not freezing on me, if I run a back up on the Data only. Then perform the wipe, the backup should still be there, correct?
and lets say I flash the stock ROM again if necessary and I'm able to boot the device.
Would it be possible to restore that data back up at all ?
or perhaps copy that back up to my PC and access/extract the files with a separate application?
Many Thanks
Click to expand...
Click to collapse
I think best thing to do is get an otg storage adapter that plugs direct to phone. They are cheap.
Then run the backup of data and store on otg storage. Then you have it safe and it can be restored at a later time with restore option in twrp.
Or you can always do a full nandroid backup.
Can you get onto the phone now? Does it boot up?
Is there anything specific you need off the phone? To be backed up?
callumbr1 said:
I think best thing to do is get an otg storage adapter that plugs direct to phone. They are cheap.
Then run the backup of data and store on otg storage. Then you have it safe and it can be restored at a later time with restore option in twrp.
Or you can always do a full nandroid backup.
Can you get onto the phone now? Does it boot up?
Is there anything specific you need off the phone? To be backed up?
Click to expand...
Click to collapse
I plan on getting one of those, they seem extremely useful. A colleague has one which I plan to use tomorrow if they remember to bring it, I will then do as you suggest.
Never done a full nandroid back up before but will do some searching on that.
Phone still hangs at the Samsung splash screen.
And its really only pictures and some videos that I want, contacts would be nice too.
PS, this happened when I plugged my device into the PC to charge it was at about 5%, and I was making use of side sync to control the device when it just shutdown. I thought maybe the battery died so left it to charge a bit, it eventually tried to boot up by itself and its been looping ever since. Was really strange cause it gave me no issues prior to this. When I tried to get to the recovery it would hang at the "installing updates" section once I flashed the stock ROM I was able to get to recovery to wipe the cache but no luck.
Thanks for your suggestions much appreciated.
wahwahward said:
I plan on getting one of those, they seem extremely useful. A colleague has one which I plan to use tomorrow if they remember to bring it, I will then do as you suggest.
Never done a full nandroid back up before but will do some searching on that.
Phone still hangs at the Samsung splash screen.
And its really only pictures and some videos that I want, contacts would be nice too.
PS, this happened when I plugged my device into the PC to charge it was at about 5%, and I was making use of side sync to control the device when it just shutdown. I thought maybe the battery died so left it to charge a bit, it eventually tried to boot up by itself and its been looping ever since. Was really strange cause it gave me no issues prior to this. When I tried to get to the recovery it would hang at the "installing updates" section once I flashed the stock ROM I was able to get to recovery to wipe the cache but no luck.
Thanks for your suggestions much appreciated.
Click to expand...
Click to collapse
They are really useful, one of the best things ive ever bought regarding my phone. I use it daily now.
As for nandroid backup, it basically backs up absolutely everything including the firmware and data and all partitions. I always do it before flashing or modifying anything. Then if anything goes wrong, you just flash back your nandroid backup.
Can i ask before this happened did you use google photos? If so and sync was on they will all be saved. If you dont use it i reccomend you to use it from now on incase this ever happens in future.
See how you go making the backup when you can then if you need help regarding flashing the stock and getting the phone working ill help
callumbr1 said:
They are really useful, one of the best things ive ever bought regarding my phone. I use it daily now.
As for nandroid backup, it basically backs up absolutely everything including the firmware and data and all partitions. I always do it before flashing or modifying anything. Then if anything goes wrong, you just flash back your nandroid backup.
Can i ask before this happened did you use google photos? If so and sync was on they will all be saved. If you dont use it i reccomend you to use it from now on incase this ever happens in future.
See how you go making the backup when you can then if you need help regarding flashing the stock and getting the phone working ill help
Click to expand...
Click to collapse
Good day callumbr1
I never made use of google photos, not the biggest fan of cloud storage to be completely honest but I do see its benefits when it comes to times like these. lol
as for the device, last night I flashed a custom recovery (arter97) and made use of the SkipSoft Android ToolKit to pull my photos, videos and documents through the adb protocol. That being said, I have the data I wanted so all is well there.
However, after wiping the cache and doing a data / factory reset. I reflashed the stock ROM, it all goes swell until the android pops up with a message displaying " installing system updates". It gets to 32% changes to erasing then restarts , and this happens constantly no matter how many times I flash it or restart the device.
I read on another forum that my devices is probably dead and it could be the mother board. Any thoughts?
You think maybe a custom ROM would bring it up?
wahwahward said:
Good day callumbr1
I never made use of google photos, not the biggest fan of cloud storage to be completely honest but I do see its benefits when it comes to times like these. lol
as for the device, last night I flashed a custom recovery (arter97) and made use of the SkipSoft Android ToolKit to pull my photos, videos and documents through the adb protocol. That being said, I have the data I wanted so all is well there.
However, after wiping the cache and doing a data / factory reset. I reflashed the stock ROM, it all goes swell until the android pops up with a message displaying " installing system updates". It gets to 32% changes to erasing then restarts , and this happens constantly no matter how many times I flash it or restart the device.
I read on another forum that my devices is probably dead and it could be the mother board. Any thoughts?
You think maybe a custom ROM would bring it up?
Click to expand...
Click to collapse
Thats good about your data :good:
As for the little android guy and the installing updates then erasing, this normally happens. It happens every single time i restore and normally boots fine just after its not normally an issue. After yours says erasing does it then just reboot and restart the process of erasing constantly?
What i would suggest first is to flash a different stock ROM, preferably one with newest bootloader.
After flashing, boot to recovery and wipe dalvik cache. If it gets as far as the samsung logo just leave it as the first boot can take a while... like 30 minutes.
If that doesnt work try to flash a custom ROM. I reccomend CarHD ROM. I uave used it for quite some time and no issues.
It deffinately does not sound like motherboard issue. Normally you would have many issues and errors on boot prior to having main board issues.
See how you get on and keep me updated.
callumbr1 said:
Thats good about your data :good:
As for the little android guy and the installing updates then erasing, this normally happens. It happens every single time i restore and normally boots fine just after its not normally an issue. After yours says erasing does it then just reboot and restart the process of erasing constantly?
What i would suggest first is to flash a different stock ROM, preferably one with newest bootloader.
After flashing, boot to recovery and wipe dalvik cache. If it gets as far as the samsung logo just leave it as the first boot can take a while... like 30 minutes.
If that doesnt work try to flash a custom ROM. I reccomend CarHD ROM. I uave used it for quite some time and no issues.
It deffinately does not sound like motherboard issue. Normally you would have many issues and errors on boot prior to having main board issues.
See how you get on and keep me updated.
Click to expand...
Click to collapse
It doesn't say erasing after the first time. Right after the flash it will reboot to the blue screen with the android, it displays Installing update with a percentage bar which gets to 32% then that disappears and shows erasing, then again it shows installing update with no percentage bar. The android guy has a two arrows on his chest spinning which eventually stops. The device then reboots. It goes back to the Android guy but this time it shows "installing system update" without the percentage bar, it will then freeze again then reboot. That will continue forever until the battery dies.
After flashing though I can't seem to get to recovery to wipe the cache, I hit the buttons as I always do, but the blue screen and android always appears.
This is the stock ROM I'm currently using:
https://www.sammobile.com/firmwares/download/105085/G925FXXU4DPJB_G925FXFV4DPJ2_XFV/
Do you perhaps have a link to that custom ROM? would it work fine with the service provider here in SA (Vodacom) ?
And well at least that is some good news, I'm not too keen on having to take this into a shop and pay for parts.
wahwahward said:
It doesn't say erasing after the first time. Right after the flash it will reboot to the blue screen with the android, it displays Installing update with a percentage bar which gets to 32% then that disappears and shows erasing, then again it shows installing update with no percentage bar. The android guy has a two arrows on his chest spinning which eventually stops. The device then reboots. It goes back to the Android guy but this time it shows "installing system update" without the percentage bar, it will then freeze again then reboot. That will continue forever until the battery dies.
After flashing though I can't seem to get to recovery to wipe the cache, I hit the buttons as I always do, but the blue screen and android always appears.
This is the stock ROM I'm currently using:
https://www.sammobile.com/firmwares/download/105085/G925FXXU4DPJB_G925FXFV4DPJ2_XFV/
Do you perhaps have a link to that custom ROM? would it work fine with the service provider here in SA (Vodacom) ?
And well at least that is some good news, I'm not too keen on having to take this into a shop and pay for parts.
Click to expand...
Click to collapse
Thats pretty much exactly what happens to mine after restoring or flashing but mine boots up.
Flash the firmware again but in odin options uncheck auto reboot. This time after flashing, the phone should stay off. Then you can boot to recovery.
If that doesnt work, whilst it is on the blue screen with android guy hold only vol down and power, phone will reboot, as soon as the screen goes off switch to recovery combo and this should force it to recovery.
https://forum.xda-developers.com/galaxy-s6-edge/development/rom-carhdrom-1-t3111519/page1427
Here is the link to custom ROM, it will work fine on your phone. You need to flash this through TWRP. If you need steps on how to do this please tell me.
callumbr1 said:
Thats pretty much exactly what happens to mine after restoring or flashing but mine boots up.
Flash the firmware again but in odin options uncheck auto reboot. This time after flashing, the phone should stay off. Then you can boot to recovery.
If that doesnt work, whilst it is on the blue screen with android guy hold only vol down and power, phone will reboot, as soon as the screen goes off switch to recovery combo and this should force it to recovery.
https://forum.xda-developers.com/galaxy-s6-edge/development/rom-carhdrom-1-t3111519/page1427
Here is the link to custom ROM, it will work fine on your phone. You need to flash this through TWRP. If you need steps on how to do this please tell me.
Click to expand...
Click to collapse
Man I think I'm just going to try the custom to see if it works.
Would I need to flash a custom kernel or can it be stock?
After flashing the kernel with twrp I'm going to assume I would follow the same step.
1. flash TWRP custom recovery
2. copy .zip file to sdcard
3. go to recovery, install , select the .zip
Is that it or am I missing anything else when it comes to flashing ROMs through the recovery?
wahwahward said:
Man I think I'm just going to try the custom to see if it works.
Would I need to flash a custom kernel or can it be stock?
After flashing the kernel with twrp I'm going to assume I would follow the same step.
1. flash TWRP custom recovery
2. copy .zip file to sdcard
3. go to recovery, install , select the .zip
Is that it or am I missing anything else when it comes to flashing ROMs through the recovery?
Click to expand...
Click to collapse
Thats it.
Before installing rom go to wipe in TWRP, wipe data, dalvik, cache and system.
You dont need to flash a kernel though.
However when flashing carhd rom aroma installer will go through some choices, from there you can choose to install arter kernel. I reccomend doing this rather than keeping stock kernel.
Remember once installer complete and rom is installed leave it a while if it hangs on samsung logo screen. It can take a while to boot.
callumbr1 said:
Thats it.
Before installing rom go to wipe in TWRP, wipe data, dalvik, cache and system.
You dont need to flash a kernel though.
However when flashing carhd rom aroma installer will go through some choices, from there you can choose to install arter kernel. I reccomend doing this rather than keeping stock kernel.
Remember once installer complete and rom is installed leave it a while if it hangs on samsung logo screen. It can take a while to boot.
Click to expand...
Click to collapse
Currently waiting on the custom to download, don't have the quickest internet connection.
while I've been waiting, I've tried the stock ROM again.
something I forgot to mention before, which has happened a few times:
During the blue screen with the droid stating installing updates.
it switches to a screen with a big yellow triangle two dots below it and a dead droid.
After this I get to recovery, I wiped the cache and its getting to the samsung logo but freezes and then restarts all over again.
I'm just curious if you know what the yellow triangle thing means?
wahwahward said:
Currently waiting on the custom to download, don't have the quickest internet connection.
while I've been waiting, I've tried the stock ROM again.
something I forgot to mention before, which has happened a few times:
During the blue screen with the droid stating installing updates.
it switches to a screen with a big yellow triangle two dots below it and a dead droid.
After this I get to recovery, I wiped the cache and its getting to the samsung logo but freezes and then restarts all over again.
I'm just curious if you know what the yellow triangle thing means?
Click to expand...
Click to collapse
I think it normally means a failed update. Sometimes there are instructions to use smart switch other times it just means the update failed.
Try with the custom ROM and keep me updated.
tl;dr - Can't seem to find my way out of a software brick. Have sideloaded the stock OS from 1+ but still forever getting the spinning dots or fastboot screen, depending on which mode i boot into.
Hi all. Signed up to make this thread, but i've been lurking for years.
I have a OnePlus X that is about the least modded smartphone i've ever owned. I've never been pleased enough with a retail product that i didn't feel compelled to strip out the bloat and start over, until this phone. Other than stock, i've just got a gallery app, some apps for manipulating text files or compiling code, couple games, and social media apps.
Anyway, a few days ago i got a notification about a software update. Downloaded. Installed. Updated. No problem.
Maybe yesterday or the day before, it showed up again. This morning i downloaded, installed, and suddenly i have apps closing. It's been over 12 hours so i'm hazy on how it all started, but i was getting something like "package installer" errors when attempting to open some apps. Same deal when i went to adjust permissions of those affected apps. Every time i unfocused a box that had pulled up swype, i would get an error message saying swype crashed or closed or something.
So i started uninstalling third party apps (i don't keep many, and most i've had for years so i think they're probably trustworthy). Same deal. Started uninstalling updates to google apps. Same deal. Went to uninstall and reinstall some non stock apps that i'd kept previously. Nothing.
I went to cook breakfast while an app was reinstalling, and i came back to a red dot on my screen with two white dots chasing each other around it. From what i'm reading that's a sign of a bootloop or software brick. I've taken all steps i could find, including wiping cache and sideloading a fresh stock OS, but to no avail.
Is it that i've ruined my google apps somehow and need to restore them? How would i even go about figuring out what the problem is? Any advice or guidance is appreciated
Hi,
As your device is in bootloop state, try flashing the stock rom. Make sure you wipe data and cache. As far as after update problems, i faced it few times. After updating many app crashed and phone hangs. So i prefer clean flash over dirty flashing, to make sure everything is hazel free. For the time being i upgraded from 3.1.2 to 3.1.3 without wiping data or cache and facing no problem( of course since it was an OTA). But sometimes situation comes when after update phone act weird, so tbe option which i prefer then is clean flashing the stock rom. Hope this helps.
"A09" said:
Hi,
As your device is in bootloop state, try flashing the stock rom. Make sure you wipe data and cache. As far as after update problems, i faced it few times. After updating many app crashed and phone hangs. So i prefer clean flash over dirty flashing, to make sure everything is hazel free. For the time being i upgraded from 3.1.2 to 3.1.3 without wiping data or cache and facing no problem( of course since it was an OTA). But sometimes situation comes when after update phone act weird, so tbe option which i prefer then is clean flashing the stock rom. Hope this helps.
Click to expand...
Click to collapse
I have wiped cache, deleted data, tried a factory reset in the stock bootloader, and i have used ADB to sideload a full stock rom (not upgrade package) that i downloaded from OnePlus.
Flash old stock recovery then 2.2.3. From there you can flash any MM stock firmware.
Exodusche said:
Flash old stock recovery then 2.2.3. From there you can flash any MM stock firmware.
Click to expand...
Click to collapse
Pardon me for being nooby, but how do i do this? Do i just sideload in ADB like i did the ROM? Most instructions i'm finding assume access to the OS either normally or through fastboot. I'm just stuck in the default recovery.
Thanks for the tip, though. Looking for a copy of the old stock recovery now. Did OnePlus alter their stock recovery recently? In some threads i've seen people say that a recent update made them unable to load a non-stock ROM. Is that the new recovery blocking access to non-1+ operating systems?
jtg1984 said:
Pardon me for being nooby, but how do i do this? Do i just sideload in ADB like i did the ROM? Most instructions i'm finding assume access to the OS either normally or through fastboot. I'm just stuck in the default recovery.
Thanks for the tip, though. Looking for a copy of the old stock recovery now. Did OnePlus alter their stock recovery recently? In some threads i've seen people say that a recent update made them unable to load a non-stock ROM. Is that the new recovery blocking access to non-1+ operating systems?
Click to expand...
Click to collapse
Fastboot flash easiest way. Make sure it's the old recovery from 2.2.2. Not the new mm stock recovery.
Yes, but how do i install the old stock recovery? I dug around on the forums and found the file, but the phone rejects it when sideloading and doesn't show the .img in the filesystem when inserted on a SD card.
Have to send it off to 1+ maybe? Literally all i can access right now is the (new) stock recovery. I never modded, rooted, etc before the software update sent me into the chasing dots
jtg1984 said:
Yes, but how do i install the old stock recovery? I dug around on the forums and found the file, but the phone rejects it when sideloading and doesn't show the .img in the filesystem when inserted on a SD card.
Have to send it off to 1+ maybe? Literally all i can access right now is the (new) stock recovery. I never modded, rooted, etc before the software update sent me into the chasing dots
Click to expand...
Click to collapse
I m not a dev, i m a newbie like you. i hv done a lot of experiments with my oneplus-x, as for u the first update u got few days back should be oos 3.1.2 and the one u got 2 days before should be 3.1.3. When u upgrade from lollipop to marshmellow, even your stock recovery got upgraded to latest version, which is something different from old lollipop recovery.
You said you have access to recovery mode. thts pretty much gud, what u can do is that wipe data and cache through stock recovery and do a clean install of oos 3.1.3. I ll be providing all the necessary links down below. If you need assistance with fastboot cmds and anything feel free to ask.
Thanks to original link provider @Sachin7843
Useful Links: -
1. Stock Lollipop Recovery - https://s3.amazonaws.com/oxygenos.oneplus.net/OPX_recovery.img
2. Official TWRP Recovery - https://dl.twrp.me/onyx/
3. Blu Spark Recovery - http://forum.xda-developers.com/devdb/project/dl/?id=20236
4. SuperSU for OOS 3.x.x - https://drive.google.com/file/d/0B4K5cvm1zdldcmZpc3RuVnRjUUE/view
5. Unbrick Guide - http://forum.xda-developers.com/oneplus-x/general/guide-mega-unbrick-guide-hard-bricked-t3272108
6. Official Oxygen OS 3.1.3 link - https://s3.amazonaws.com/oxygenos.o...OTA_018_all_201609291837_741146bcf28e4587.zip
7. SD Card Writable fix in MM - http://forum.xda-developers.com/android/software/fix-extsd-fix-v1-0b-2016-01-18-t3296266
8. For Stock MM Recovery - http://forum.xda-developers.com/oneplus-x/general/oxygenos-3-1-0-marshmallow-community-t3445043
Sorry for my bad english
jtg1984 said:
Yes, but how do i install the old stock recovery? I dug around on the forums and found the file, but the phone rejects it when sideloading and doesn't show the .img in the filesystem when inserted on a SD card.
Have to send it off to 1+ maybe? Literally all i can access right now is the (new) stock recovery. I never modded, rooted, etc before the software update sent me into the chasing dots
Click to expand...
Click to collapse
Don't sideload it, use fastboot to flash it. "Fastboot flash recovery name.img" - without he quotes and the image name.
Sorry for vanishing. Had a busy week.
Not sure what happened the first time i tried to put the 2.2.3 image on the SD card, because the file didn't show up in my recovery, but i tried again later (after giving up on flashing the old recovery, since i couldn't figure out how to do that in recovery) and managed to do a clean install of the older OOS version.
That did the trick, and after booting up, my phone proceeded to update again - this time without any crashes or errors with my apps afterward. The phone still does the red dot with the white dots chasing around it when it boots up, which must be the new boot screen. It also seems to stay on that screen for much longer than it stayed on the old morphing shape boot screen, but it still boots up reliably now after 30-60 seconds rather than freezing in boot forever.
I've since enabled dev mode on my phone. Is that going to be enough to enable ADB commands from recovery? I kind of like that i've kept my phone stock, so i'll leave it that way if i can, but it would have been much easier to fix this problem if i'd had access to most of my debug commands. As it was, without dev mode and in the standard recovery, it seemed that sideload was the only command i was able to use, and only when the phone was requesting a sideload over usb
Help
so i just got the lg g5, used. unlocked the bootloader, flashed twrp/rooted it, and tried to install linage os, which worked pretty good but the battery draw was insane.
i then proceeded to install fulmics rom. now i'm stuck on a bootloop which starts the recoverymode everytime.
does anyone know what to do? i'm not smart enough to get behind the kdz/tot flashing whatever it is called. i didn't came to any conclusion, tried flashing the boot.img and bootloader.img, a new kernel and other roms, also the flashable original firmware through sdcard, fixed permissions, repaired the directories but it still didn't change a thing. i always land into the recovery mode.
i really hope there is someone out there who can tell me what is going on maybe
so i got it working again.
what i did? i forced myself into recovery via holding power button and then doin the click which asked me the yes, yes again.. and all of sudden it works like nothing happened lol. had to reinstall the rom though
Anymore info on this and what you did exactly to come out of the "recovery bootloop" as I also have the same issue and suspect others may also run into this
What I did to get recovery loop:
ReRoot and flashed latest TWRP
Flashed Nougat Firmware via TWRP
Flashed Fulmics1
Reboot and then recovery loops
-
FYI for anyone else having this issue
Looking at other threads and noticed mention of this command a few times
dd if=/dev/zero of=/dev/block/platform/624000.ufshc/by-name/misc
dd if=/dev/zero of=/dev/block/platform/624000.ufshc/by-name/fota
the path on my G5 (H850) was instead /dev/block/platform/SOC/624000.ufshc and once run corrupted the device
Guess I'll reflash KDZ and try again.
This worked for me
Cuerex said:
so i got it working again.
what i did? i forced myself into recovery via holding power button and then doin the click which asked me the yes, yes again.. and all of sudden it works like nothing happened lol. had to reinstall the rom though
Click to expand...
Click to collapse
I just wanted to draw attention to this thread, because I searched for a bit and there seems to be dangerous advice (dd zero) out there and flashing. This trick worked for me right away. Thanks.
Running H850, might also work for other people stuck in TWRP bootloop with other models.
Hi, guys
my phone is Huawei p10 Lite (WAS-LX2)
Note: if you have a bricked huawei p10 lite of any kind (incl WAS-LX2) (or a NZ model)
and you want to know how i finally fixed mine, jump down to the end where it says
GOOD NEWS
quick synopsis: unlocked bootloader, flashed twrp, now i get an error (255) when trying to create backup using twrp..
you can read the rest if you want but the above basically covers it please help
so i have unlocked my bootloader and flashed twrp, before i did this i did a factory reset through androids settings, the phone is also only two months old.. but i cannot create a backup using twrp, it always fails in the same place when backing up data, does this mean my stock rom that has never been altered in anyway ect is somehow corrupt? wtf? i havnt even rooted it yet, i was going to make a backup first (of a known good rom.. lol)
i am assuming the data files are part of the rom? not something you can ignore.. they were one of the few things selected by default.. i have tried rebooting phone a few times, formatting sd card etc (64gb) so there is plenty of space...
any help would be much appreciated
the tutorial i was following is here: https://forum.xda-developers.com/p10/how-to/twrp-how-to-root-p10-lite-t3617418
my phones full build (or do i mean firmware number?..) number: WAS-LX2C706B170
android version 7.0
emui 5.1
any more info, just ask..
also, ive heard that once you have installed twrp/ unlocked bootloader you cannot use system update or androids factory reset without bricking your phone? is that true? otherwise i want to try that, i just want to root my damn phone already... or... its been a long time since i last rooted a phone... you dont need root to make a twrp rom backup do you? nah, surely not..?
or could my twrp install be corrupt? the tutorial said to drag and drop the downloaded file into cmd, but that wasnt working so i entered the location manually, it still appeared to install fine that way though so surely thats not it. i dont know
ok, i just bricked my phone... i did a factory reset in twrp, thinking it was... a factory reset... i googled whether it was safe first and everything came up clean... but it is not it wiped the os or something and now i just get a boot loop... what the hell? how could i be so stupid?! and how could twrp not warn me.. it was just a factory reset? and i havnt even rooted it yet, at this point i would probably prefer it was rooted in the hope their would be more options available to me to un brick it.. ok now i really need someones help.. why am i drinking and trying to watch tv while doing this, i am so stupid, this is the best and most expensive phone ive ever owned, what have i done?! sorry sorry ill calm down...
so if my firmware number is: WAS-LX2C706B170 then can i use one of these (also for huawei p10 lite) and if so what would be the difference? why are the numbers slightly different? same phone model, different firmware/ slightly...
here they are:
WAS-LX2C706B120
WAS-LX2C185B121
and they each had a OTA and a full firmware version too.
here is the link: https://romfirmware.com/2017/08/04/huawei-p10-lite-was-lx2/
but before i try these things, is there any saving my current stock rom? i dont understand how a factory reset could prevent it from booting properly..? its not actually bootlooping, it either gets stuck on logo, or goes to black screen but you can still see the volume slider when pressing volume buttons, see the home and back buttons (which do nothing) and hear the lock sound when you press the power button... still always a black screen though.. i guess its possible i knocked the format data button in twrp but im 95% sure i didnt. if i remove twrp and install stock recovery would i be able to get the stock rom working that way? or is there any way to do an OTA update/ fix as i havnt rooted it yet so it should be capable (except i cant boot to rom..) if i hold down all buttons it seems to try to do something... it says emui then goes to 4% then says software install failed: the update package does not exsist. please download the package again... reboot system now..? whats that all about?
ok, so i have found a possible solution but would like confirmation from someone who knows these things first...
i found this tool: Huawei Firmware Finder (Team MT)
link: https://forum.xda-developers.com/tools/general/huawei-firmware-finder-team-mt-t3469146
and using this i have found my exact firmware, apparently straight from the official huawei update servers. the firmware number matches exactly, but there is no mention of it being for a huawei p10 lite so not 100% sure its a good idea, but if the whole firmware number matches perfectly and its the only one of its kind it must be the right one surely? and the size is the same as other huawei p10 lite firmwares..
here is the direct link:http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1514/g104/v89953/f2/full/update.zip
please someone else chime in to give me some advice...
is there any risk with flashing roms, or can i always still access twrp recovery to flash a new rom if i brick the phone?
cheers all
ok UPDATE:
i tried the repair file system option in twrp on the data partition just for fun (wrong word, im not having fun..) because i thought this rom was a lost cause..
upon reboot a huawei warning pops up saying the data partition has some serious damage and offers to try a low level format, it finishes successfully then restarts.
no change, still broken, but it offers to do a full format of data due to serious damage.
after restart phone boots fine, and enters setup wizard for first boot etc... perfect.
problem is, i still cant backup the data partition in twrp, still get same error:
createTarFork() process ended with ERROR: 255
bacjup failed..??
did i somehow get a brand new phone with a bad flash of a stock rom straight from the manuafacturer? with a slightly corrupted data partition... is there anyway to fix this? or can i assume the rom i downloaded from huaweis servers for my exact firmware is correct and i can use that as a backup in case i need it?
or in case my data is corrupt should i try to install that rom now?
or should i try to reflash twrp first and see if i can get a successful backup?
or should i just forget all this crap now my phone works and go straight to rooting it?
i really need some professional advice here.. lol
clearly i aint no expert
ok, so i noticed the frp was still locked for some reason so using adb, i relocked and unlocked bootloader, now frp is unlocked too, reflashed twrp, wiped dalvik cach/ cache, tried backup again...
no change, still fails on data partition, same error 255...?!
im lost,
close to trying to flash that rom i found...
or at least just rooting already..
OK UPDATE: first the bad news, then the good news:
so i gave up on backing up my data partition, as it was clearly somehow corrupt?...
so i went ahead and rooted my phone, everything was more or less working untill i used apps2sd...
that required several reboots and partitioning my sd card etc, then it said something about needing systemless root and a reboot, i went ahead with that and then my phone started bootlooping again, this time there was no fixing it, i of course tried removing sd card too.. nothing..
so i tried restoring to the rom i found using huawei firmware finder tool, that didnt work, using twrp to install zip, i got error -9? (couldnt find that one on the net..)
tried unzipping and putting update.app in dload folder on root of sd card, then booting to erecovery pressing vol- vol+ and power button, that also failed. now i was stressed near tears, this was the third day of research and trying to fix this... so i searche dhigh and wide, and gave up on stock roms, i figured that a custom rom designed for my chipset (hi6250)
and said to work on a huawei p10 lite then it should at least semi work on my phone, i did more research and the rom creator said to only use his version of TWRP to flash their ROM, so i reflashed to theirs... BIG mistake, if the custom recovery is the only thing you can boot into and the only way to access boot loader, do NOT risk losing it.. i did.. i lost my recovery..
so there for i lost my bootloader, so therefore i lost my ability to use ADB, or connect to pc in any way. i wanted to step in front of a bus at this point... but then there was:
GOOD news:
so i resorted to trying the official recovery roms on XDA for p10 lites, only i had been avoiding them as none of the build/ firmware numbers matched mine at all.. but i went ahead and clicked on the first download, (here is the link to post: https://forum.xda-developers.com/p10-lite/help/original-service-rom-huawei-p10-lite-t3688097) - you might find a few comments from me near the end there, lol..
anyway , once downloaded i unzipped and just pasted the dload folder straight to sd card and rebooted phone with all three buttons depressed. to my amazement when the huaei erecovery came up it started installing!!!? wow, i tried not to get my hopes up though..
first boot restarted after blue huawei splash logo, second boot went back to erecovery, offered factory reset and wipe cache(so i did), now it boots up perfectly every time like new, everything works! even gave me NZ language options etc, even though my build number didnt match any of those above, its still worked and even better it still shows all the correct information under about phone.
my build number was: WAS-LX2C706B170
so i can confirm it works for nz huawei p10 lites with 4gb ram and dual sim and WAS-LX2 builds
hope this helps someone else out there like me
tags: all official huawei rom,stock rom,twrp.stock,backup,official,rom finder,nandroid,back up, save,solution,fix,help,stuck,advice,simple,easy,guide,tutorial,root,huawei,p10,p10 lite,huawei p10 lite,was-lx1,was-lx2,firmware,iso,image,zip,file,download,error 255,255,error,createTarFork(),
Hey, just wanted to say thank you for posting this!
I'm from New Zealand, and have the exact same phone and the exact same issue.
Your "good news" section was exactly what I was looking for, and helped me fix my phone.
Cheers, George
update copy
Hi was wondering if you have a copy of the update you used as it is near impossible to get from the link on the other thread. Another Kiwi with a bricked phone.
All good, after 4 hours it finally downloaded. I will keep a copy in case anyone needs it. WAS-LX2