Incremental OTA (Flash over OxygenOS 3.1.0 Only)
https://www.androidfilehost.com/?fid=385035244224407042
Full Flashable ZIP
http://otafsc.h2os.com/patch/amazon...2Oxygen_14_OTA_026_all_1612220228_c351fee.zip
Google Drive Mirror (Full ZIP) (if above link is slow) : https://drive.google.com/file/d/0B-4BEcyjaSsgSmFRWldrOXpKV0E/view
For those who are on H2OS 2.5.1, well, its better to revert to OOS safely and then flash this one
I didn't try flashing over H2OS yet and not sure whether it works
Do you think that this update will fix the IMEI2 "0" problem?
Cryer said:
Do you think that this update will fix the IMEI2 "0" problem?
Click to expand...
Click to collapse
I hope so. Give it a try
Sorry for the dumb question. Should I directly flash the above mentioned flashable zip on the custom rom or should I first go back to OOS?
8bitrebellion said:
Sorry for the dumb question. Should I directly flash the above mentioned flashable zip on the custom rom or should I first go back to OOS?
Click to expand...
Click to collapse
Yes, You must be on OOS 3.1.0 and then clean flash this ROM
evilgenius94 said:
Yes, You must be on OOS 3.1.0 and then clean flash this ROM
Click to expand...
Click to collapse
Thanks. Any guide/steps or link to an existing thread for doing that? I could not find the thread.
Is this VoLTE?
I am on official OS 3.1.0, When I am trying to flash the ROM I am getting installation failed error.
Cryer said:
Do you think that this update will fix the IMEI2 "0" problem?
Click to expand...
Click to collapse
nope
Yes
evilgenius94 said:
For those who are on H2OS 2.5.1, well, its better to revert to OOS safely and then flash this one
I didn't try flashing over H2OS yet and not sure whether it works
Click to expand...
Click to collapse
so how to go back to OOS before installing OOS 3.5.5 ? for users with H2OS 2.5.1 without efs backup ?
I am on Android N, should I go back to oos 310 first?
leonalewis said:
so how to go back to OOS before installing OOS 3.5.5 ? for users with H2OS 2.5.1 without efs backup ?
Click to expand...
Click to collapse
http://forum.xda-developers.com/oneplus-2/general/revert-to-oos-h2o-os-easy-t3522901
---------- Post added at 07:10 PM ---------- Previous post was at 07:09 PM ----------
cloudzhang23 said:
I am on Android N, should I go back to oos 310 first?
Click to expand...
Click to collapse
No need if you download the full zip. Just clean flash it.
thread closed.
please use this one.
http://forum.xda-developers.com/oneplus-2/general/oxygenos-3-5-5-mm-ota-oneplus-2-t3523876
Related
These two zips should help you to switch between old and new firmware
Switch_tOS2xx_CM13: Old Firmware + TWRP 3.0.2-0
Use for CM13 with old Kernel(before 3rd June), OxygenOS 2.X.X, HydrogenOS LP
Link v2: Old Firmware (OOS 2.2.1)
Link v3: Old Firmware (OOS 2.2.1-1)
Link v4:Old Firmware (OOS 2.2.1-2)
Changelog
v2: TWRP error 6 is fixed - new updater-script
v3: recompiled TWRP with english language pack only
v4: newest firmware form OOS 2.2.1-2
Install Steps:
1. Reboot into TWRP
2. Flash Switch_tOS2xx_CM13.zip
3. Reboot into TWRP
4. Install CM13 or OOS2.x.x based ROM
Switch_tOS3_H2OSMM: New Firmware + TWRP Hybrid(v1-v3,v5)/GraraksTWRP(v4)
Use for CM13 with new Kernel(since 3rd June), OxygenOS 3.0.0/3.0.1, HydrogenOS MM
For use with OFFICIAL CyanogenMod 13 NIGHTLY/RR/BlurOS/Beanstalk/AOSP-CAF/AOSPA/H2OS1.4/OOS3.X.X
Link v1: New Firmware(H2OS MM) with Hybrid TWRP v2
Link v2:New Firmware(OOS 3.0.0) with Hybrid TWRP v2
Link v3: New Firmware(OOS 3.0.1) with Hybrid TWRP v2
Link v4: New Firmware(OOS 3.0.1) with Graraks TWRP
Link v5: New Firmware(OOS 3.0.2) with Hybrid TWRP v3
Link v6: New Firmware(OOS 3.0.2) with Hybrid TWRP v3.2
Link v7: New Firmware(OOS 3.0.2) with Hybrid TWRP v3.3
Changelog
v1: TWRP has all language packs
v2: TWRP has only english language pack
v3: newest firmware from OOS 3.0.1
v4: Graraks Recovery with OTG support
v5: OOS 3.0.2 firmware, Hybrid TWRP v3
v6: Hybrid TWRP v3.2
v7: Hybrid TWRP v3.3, changed automatic reboot delay to 3 seconds
Install Steps:
1. Reboot into TWRP
2. Flash Switch_tOS3_H2OSMM.zip
3. Reboot into TWRP
4. Install H2OS MM or OOS3 based ROM
Fastboot Version V4:
Download
Thanks to @WhyOrean for the TWRP Hybrid
flo071 said:
Hi,
these two zips should help you to switch between old and new firmware
Switch_tOS2xx_CM13: Old Firmware + TWRP 3.0.2-0
Link: https://www.dropbox.com/s/i5jusu831huxpuv/Switch_tOS2xx_CM13.zip?dl=0
Switch_tOS3_H2OSMM: New Firmware + TWRP Hybrid
Link: https://www.dropbox.com/s/bk1dev25xo5ebej/Switch_tOS3_H2OSMM.zip?dl=0
Thanks to @WhyOrean for the TWRP Hybrid
Click to expand...
Click to collapse
Similar to @JustArchi's Helper zips to switch between OOS 3.0 and OOS 2.2.1 firmware then?
Spannaa said:
Similar to @JustArchi's Helper zips to switch between OOS 3.0 and OOS 2.2.1 firmware then?
Click to expand...
Click to collapse
little bit.... but mine has twrp included...
i did not copy it... if u wanted to say that...
flo071 said:
little bit.... but mine has twrp included...
i did not copy it... if u wanted to say that...
Click to expand...
Click to collapse
No, that's not what I meant - I just wondered what the difference was.
JustArchi's includes TWRP too but it's not flashed directly via the updater-script as this sometimes fails.
To use in twrp?
I'm on OOS3.0. and can't flash SWITCH_TO_OOS2.0.ZIP
vergilbt said:
To use in twrp?
I'm on OOS3.0. and can't flash SWITCH_TO_OOS2.0.ZIP
Click to expand...
Click to collapse
Same issue here. Had been running OOS3 beta and have struggled to install anything else since.
EDIT: Looks like JustArchi zip gives the same error... currently no way to go back to 2.XX short of using the Quallcomm tool?
vergilbt said:
To use in twrp?
I'm on OOS3.0. and can't flash SWITCH_TO_OOS2.0.ZIP
Click to expand...
Click to collapse
boboskins said:
Same issue here. Had been running OOS3 beta and have struggled to install anything else since.
EDIT: Looks like JustArchi zip gives the same error... currently no way to go back to 2.XX short of using the Quallcomm tool?
Click to expand...
Click to collapse
hmmm.... strange...
i ll try to fix this...
thanks for the Screenshot
vergilbt said:
To use in twrp?
I'm on OOS3.0. and can't flash SWITCH_TO_OOS2.0.ZIP
Click to expand...
Click to collapse
boboskins said:
Same issue here. Had been running OOS3 beta and have struggled to install anything else since.
EDIT: Looks like JustArchi zip gives the same error... currently no way to go back to 2.XX short of using the Quallcomm tool?
Click to expand...
Click to collapse
new one is here with new updater-script
https://www.dropbox.com/s/xl8ny63m6u27tbr/Switch_tOS2xx_CM13v2.zip?dl=0
flo071 said:
new one is here with new updater-script
https://www.dropbox.com/s/xl8ny63m6u27tbr/Switch_tOS2xx_CM13v2.zip?dl=0
Click to expand...
Click to collapse
tested and works fine. :good:
Thanks. Very useful. May I only ask for an english based twrp in switch to oos2?
Inviato dal mio iPhone utilizzando Tapatalk
fmotta said:
Thanks. Very useful. May I only ask for an english based twrp in switch to oos2?
Inviato dal mio iPhone utilizzando Tapatalk
Click to expand...
Click to collapse
you can change the language in the settings
flo071 said:
new one is here with new updater-script
https://www.dropbox.com/s/xl8ny63m6u27tbr/Switch_to_OOS2xx_CM13v2.zip?dl=0
Click to expand...
Click to collapse
Thx...
Is working in both directions
[emoji106]
flo071 said:
you can change the language in the settings
Click to expand...
Click to collapse
I am stupid [emoji23] [emoji23] [emoji23]
sorry but, what happens of i install cm13 with oxygenos3.0 firmware?
flo071 said:
Hi,
these two zips should help you to switch between old and new firmware
Switch_tOS2xx_CM13: Old Firmware + TWRP 3.0.2-0
Link v1: [url]https://www.dropbox.com/s/i5jusu831huxpuv/Switch_tOS2xx_CM13.zip?dl=0[/URL]
Link v2: https://www.androidfilehost.com/?fid=24533103863138111
v2: TWRP error 6 is fixed - new updater-script
Switch_tOS3_H2OSMM: New Firmware + TWRP Hybrid
Link: https://www.androidfilehost.com/?fid=24533103863138121
Thanks to @WhyOrean for the TWRP Hybrid
Click to expand...
Click to collapse
Hi, please write Aldo how To use them..so, if i'm on hydrogenos i nees To flash "Switch_tOS2xx_CM13: Old Firmware + TWRP 3.0.2-0", reboot in twrp and flash cyabogenmod 13?or not?just flash it AMD suddendly cyanogenmod?
Maxximo88 said:
Hi, please write Aldo how To use them..so, if i'm on hydrogenos i nees To flash "Switch_tOS2xx_CM13: Old Firmware + TWRP 3.0.2-0", reboot in twrp and flash cyabogenmod 13?or not?just flash it AMD suddendly cyanogenmod?
Click to expand...
Click to collapse
hi,
for cm13/oos2x:
1. reboot into TWRP
2. flash the switch_to_cm13_oss2.zip
3. reboot into TWRP
4. flash a cm13 or oos2 based rom
flo071 said:
hi,
for cm13/oos2x:
1. reboot into TWRP
2. flash the switch_to_cm13_oss2.zip
3. reboot into TWRP
4. flash a cm13 or oos2 based rom
Click to expand...
Click to collapse
Thanks, so reboot required between flashing thr zip amd the ROM!this info could be useful in the first topic
Maxximo88 said:
Thanks, so reboot required between flashing thr zip amd the ROM!this info could be useful in the first topic
Click to expand...
Click to collapse
yes because it needs to load the new installed twrp
flo071 said:
yes because it needs to load the new installed twrp
Click to expand...
Click to collapse
I saw you've added this pocket guide in the first topic, thanks!
it´s working! now testing CM13 from Oxygen OS3 =)
[PORT][OFFICIAL][ROM][8.1][Pixel Experience][07/06/18]
Thanks to @sooti
Original thread
Download link Mi5X:
Google Drive
How to install:
- Unlock your bootloader
- [Optional] Flash A1 Oreo Firmware
- Flash Oreo TWRP modded
- Wipe Data/Cache/Dalvik/System
- Flash ROM zip through TWRP
- Reboot to recovery using TWRP Recovery (In TWRP go to Reboot -> recovery)
- In TWRP go to Advanced -> Terminal -> Write "a1to5x" -> press Enter
- Reboot to System
Known issues:
- Please don't install OTA package. It won't work.
- You tell me.
Contributors
Alex12, sooti
ROM OS Version: 8.x Oreo
ROM Kernel: "Sooti"
ROM Firmware Required: TWRP oreo by Alex12
Version Information
Status: Stable
Thanks to a good job
How to flash a1 oreo firmware?
---------- Post added at 01:23 PM ---------- Previous post was at 12:54 PM ----------
I noticed that this rom is originally ported from mi a1 and a lot of awesome rom like RR is on the mi a1 thread, question can i flash the other rom straight and flashed it with the same procedure?
mCdroid09 said:
How to flash a1 oreo firmware?
---------- Post added at 01:23 PM ---------- Previous post was at 12:54 PM ----------
I noticed that this rom is originally ported from mi a1 and a lot of awesome rom like RR is on the mi a1 thread, question can i flash the other rom straight and flashed it with the same procedure?
Click to expand...
Click to collapse
For A1 Oreo firmware: here
What will happpen if i dont flash the a1 firmware? It said "optional"?
a1 firmware and ‘a1to5x’ is not necessary ,just flash rom does work
A custom rom or maybe something remarkable?
Is that the truth if I understand that a terminal with android stock needs that something else that provides a custom rom, but I see that there are not many differences between them.
Is this more advisable?
Thanks
lslvxy said:
a1 firmware and ‘a1to5x’ is not necessary ,just flash rom does work
Click to expand...
Click to collapse
Really? I don't think it can boot if you do not convert kernel with "a1to5x"
bragon01 said:
Really? I don't think it can boot if you do not convert kernel with "a1to5x"
Click to expand...
Click to collapse
i just flash rom without Firmware and a1to5x ，has no problem ，work well
Does stock mi camera apps with background blur work?
mCdroid09 said:
Does stock mi camera apps with background blur work?
Click to expand...
Click to collapse
Yep working like brilliant even ar stacker.
mi stock camera app not included !! how to solve ?
xdamami said:
Yep working like brilliant even ar stacker.
Click to expand...
Click to collapse
mi stock camera app not included !! how to solve ?
riddle1992 said:
mi stock camera app not included !! how to solve ?
Click to expand...
Click to collapse
https://forum.xda-developers.com/mi-a1/themes/oreo-mia1-stock-rom-camera-app-custom-t3758543
Best custom rom sonfar ????
bragon01 said:
[PORT][OFFICIAL][ROM][8.1][Pixel Experience][07/06/18]
How to install? I followed every thing and flashed A1 Firmware... When i tried the Oreo Modded TWRP to flash the Rom zip, It says Zip Error... I cannot flash any rom or kernel of A1, when i try to flash zip it detects my device is not A1 so it shows device error... How to fix that?
Click to expand...
Click to collapse
Ritwik Rahman said:
bragon01 said:
[PORT][OFFICIAL][ROM][8.1][Pixel Experience][07/06/18]
How to install? I followed every thing and flashed A1 Firmware... When i tried the Oreo Modded TWRP to flash the Rom zip, It says Zip Error... I cannot flash any rom or kernel of A1, when i try to flash zip it detects my device is not A1 so it shows device error... How to fix that?
Click to expand...
Click to collapse
Maybe you should format your system partition and flash rom immediately
Click to expand...
Click to collapse
bragon01 said:
Ritwik Rahman said:
Maybe you should format your system partition and flash rom immediately
Click to expand...
Click to collapse
I flashed A1 firmware, Wiped Every Partition from recovery (Except Internal Memory), And flashed the rom but it shows Device Error
Click to expand...
Click to collapse
Ritwik Rahman said:
bragon01 said:
I flashed A1 firmware, Wiped Every Partition from recovery (Except Internal Memory), And flashed the rom but it shows Device Error
Click to expand...
Click to collapse
You shoud check system partition because wiping makes it blank and 0 MB.
Check and re-format system partition with ext4
Click to expand...
Click to collapse
Awesome ROM & super clear instruction. Thank you!
This rom is amazing anyone who has boot issues make sure you run that command in twrp
- In TWRP go to Advanced -> Terminal -> Write "a1to5x" -> press Enter
*Update to new TWRP build 3.2.3-1 or later!*H918 Oreo Stock rom.Stock Oreo zip with rootSteps:
Formate by going to advance wiping everything except SD card
Flash Rom
Flash Magisk
Boot
*20g Read before flashing 20g*
https://forum.xda-developers.com/v20/development/rom-h91820f-oreo-root-t3848854/post77987795
Downloads:
Android File Host
Mega
20g provided by @Phoenix591
Donate:Cash App
https://cash.me/$hmerz
PayPal
https://www.paypal.me/HassaanM
Was there some post about someone releasing updated TWRP that is Oreo compatible around 9/23?
@dudeawsome do we need to update our base to Oreo or can we stay on nougat and install your rom? Thanks for this.
BadToThePhone said:
@dudeawsome do we need to update our base to Oreo or can we stay on nougat and install your rom? Thanks for this.
Click to expand...
Click to collapse
It will do everything for you just follow the instructions
dudeawsome said:
*Will need an updated TWRP will update links once I get confirmation on the TWRP release*
H918 Oreo Stock rom.
Stock Oreo zip with root
Steps:
Formate by going to advance wiping everything except SD card
Flash Rom
Flash Magisk
Boot
Downloads:
Android File Host
Click to expand...
Click to collapse
So to be clear, I have to wipe system, data ect? I can't install over 7.0?
Sent from my LG-H918 using XDA Labs
Edit
Reading over and over what you put, the answer is clear.
My post is more like a WTF!!! This sucks lol
BROKEN1981 said:
So to be clear, I have to wipe system, data ect? I can't install over 7.0?
Sent from my LG-H918 using XDA Labs
Edit
Reading over and over what you put, the answer is clear.
My post is more like a WTF!!! This sucks lol
Click to expand...
Click to collapse
Lol you could try but I would recommend clean flash
dudeawsome said:
Lol you could try but I would recommend clean flash
Click to expand...
Click to collapse
Ahhh ok I see.
Sent from my LG-H918 using XDA Labs
Links are up! update TWRP first!
dudeawsome said:
Links are up! update TWRP first!
Click to expand...
Click to collapse
Thank you for your work on this! Anything removed from this ROM (i.e. RCTD, Triton, CCMD) or is it completely stock?
dleclair said:
Thank you for your work on this! Anything removed from this ROM (i.e. RCTD, Triton, CCMD) or is it completely stock?
Click to expand...
Click to collapse
Bone stock. Flash MK Oreo to remove the reset I want to work on Super Oreo builds to edit it more.
dudeawsome said:
*
Stock Oreo zip with root
Click to expand...
Click to collapse
Thanks a lot for putting together the zip. Can't wait to flash it (but need to backup stuffs first)!
dudeawsome said:
Bone stock. Flash MK Oreo to remove the reset I want to work on Super Oreo builds to edit it more.
Click to expand...
Click to collapse
what's removing the reset?
eigen said:
what's removing the reset?
Click to expand...
Click to collapse
Like rctd and stuff
so, is it just me or is it encrypting the data partition, cause im pretty sure it is...
Here is my steps on how I installed
Updated to the new twrp
Advance wipe data.system cache( I didn't format)
Flash Rom
Flash kernel
Flash magisk
Reboot took like 3mins
Restored my apps via TB
Everything is working good..
ki11aprime said:
Here is my steps on how I installed
Updated to the new twrp
Advance wipe data.system cache( I didn't format)
Flash Rom
Flash kernel
Flash magisk
Reboot took like 3mins
Restored my apps via TB
Everything is work good..
Click to expand...
Click to collapse
coming from stock rom or RR, LOS?
sinkoo1979 said:
coming from stock rom or RR, LOS?
Click to expand...
Click to collapse
RR
ki11aprime said:
RR
Click to expand...
Click to collapse
Stuck on LG logo for like 5 minutes.
sinkoo1979 said:
Stuck on LG logo for like 5 minutes.
Click to expand...
Click to collapse
Formate data in twrp and type yes
sinkoo1979 said:
Stuck on LG logo for like 5 minutes.
Click to expand...
Click to collapse
Strange mines booted under 5mins by following the steps I listed..
Hi, I heard there was some issue regarding the Oxygen OS GSI port and the developer had to close the telegram chat and disable access to all the ROM links. However I just wanted to try it out. So if anyone has the latest Beta build (23rd April) could they please upload it to cloud and provide me with the link.
Thanks in advance
Uploaded to my gdrive, both stable and beta + stock thermals. Tell me if it's working.
https://drive.google.com/drive/folders/1QRHTt79uiN2-MsXbZr-Z4vatN8mx0Qw-
Oxygen Image
Files for Oxygen Image
Regards
https://we.tl/t-b3KjxKA8Io
https://we.tl/t-Fcq9i1ZX9u
https://we.tl/t-ZxdxDn7W6O
muskeltier said:
Files for Oxygen Image
Regards
https://we.tl/t-b3KjxKA8Io
https://we.tl/t-Fcq9i1ZX9u
https://we.tl/t-ZxdxDn7W6O
Click to expand...
Click to collapse
Aren't these older than what the dev already had working on Poco f1?
stewykam said:
Aren't these older than what the dev already had working on Poco f1?
Click to expand...
Click to collapse
The latest Oxygen Port Files for Poco:good:
saintjimmy1984 said:
Uploaded to my gdrive, both stable and beta + stock thermals. Tell me if it's working.
https://drive.google.com/drive/folders/1QRHTt79uiN2-MsXbZr-Z4vatN8mx0Qw-
Click to expand...
Click to collapse
Yes, it's working
muskeltier said:
Files for Oxygen Image
Regards
https://we.tl/t-b3KjxKA8Io
https://we.tl/t-Fcq9i1ZX9u
https://we.tl/t-ZxdxDn7W6O
Click to expand...
Click to collapse
Can you provide flashing instructions for these three files? Are there any problems with the ROM?
BentMetal said:
Can you provide flashing instructions for these three files? Are there any problems with the ROM?
Click to expand...
Click to collapse
Clean Flash
1) Reboot to Recovery (TWRP)
2) Wipe System, Data, Cache, Dalvik Cache.
3) Flash - Vendor OOS + Oxygen Image
4) Once done, wipe cache.
5) Reboot to System.
Vendor Patch if you come from other Vendor!!!!
Dont flash Gapps!
muskeltier said:
Clean Flash
1) Reboot to Recovery (TWRP)
2) Wipe System, Data, Cache, Dalvik Cache.
3) Flash - Vendor OOS + Oxygen Image
4) Once done, wipe cache.
5) Reboot to System.
Vendor Patch if you come from other Vendor!!!!
Dont flash Gapps!
Click to expand...
Click to collapse
Thanks! Flashed them and am running it now. No issues. Runs smoothly, looks good!
muskeltier said:
The latest Oxygen Port Files for Poco:good:
Click to expand...
Click to collapse
So it's the same as the port rom posted "elsewhere"?
muskeltier said:
Clean Flash
1) Reboot to Recovery (TWRP)
2) Wipe System, Data, Cache, Dalvik Cache.
3) Flash - Vendor OOS + Oxygen Image
4) Once done, wipe cache.
5) Reboot to System.
Vendor Patch if you come from other Vendor!!!!
Dont flash Gapps!
Click to expand...
Click to collapse
muskeltier said:
Files for Oxygen Image
Regards
https://we.tl/t-b3KjxKA8Io
https://we.tl/t-Fcq9i1ZX9u
https://we.tl/t-ZxdxDn7W6O
Click to expand...
Click to collapse
Where did you get these anyway? Is someone updating them regularly?
I am enjoying this Oos port. It's stable, but there are a few menu items that don't work. Not a deal breaker.
The fingerprint reaction time is quick like MIUI, very fast. And I like the battery usage notification (in the picture).
saintjimmy1984 said:
Uploaded to my gdrive, both stable and beta + stock thermals. Tell me if it's working.
https://drive.google.com/drive/folders/1QRHTt79uiN2-MsXbZr-Z4vatN8mx0Qw-
Click to expand...
Click to collapse
Would you have the V4A_Fix.zip by any chance?
rakeshb4r said:
Would you have the V4A_Fix.zip by any chance?
Click to expand...
Click to collapse
Yes, just uploaded
saintjimmy1984 said:
Yes, just uploaded
Click to expand...
Click to collapse
Thanks a lot
muskeltier said:
Files for Oxygen Image
Regards
https://we.tl/t-b3KjxKA8Io
https://we.tl/t-Fcq9i1ZX9u
https://we.tl/t-ZxdxDn7W6O
Click to expand...
Click to collapse
These file is no longer available for download. Pls help, also where to get the vendor patch? And which thermal to flash and when to flash?. Thank you
Anyone got an idea what vendor fw this rom (beta10) comes with?
MadScientist001 said:
Anyone got an idea what vendor fw this rom (beta10) comes with?
Click to expand...
Click to collapse
Flash it and check /vendor/build.prop's first few lines with a root explorer or in TWRP.
---------- Post added at 03:06 PM ---------- Previous post was at 03:03 PM ----------
ythamil said:
These file is no longer available for download. Pls help, also where to get the vendor patch? And which thermal to flash and when to flash?. Thank you
Click to expand...
Click to collapse
I have it mirrored for my use here - http://dl.vj.lc/Poco-OOS/
Only flash OOS zip and see if that runs good for you, it includes little older stable vendor. If you flash new vendor, follow that by flashing vendor_patch.zip
By default it has OOS stock thermals, if you get temperature too high messages on phone, flash MIUI thermals, otherwise don't touch thermals in my opinion. OOS thermal zip is to get back to defaults after you flash MIUI thermals.
there's so many, not sure which one I should choose
Pitchblack recovery. Imo
Mcha01 said:
Pitchblack recovery. Imo
Click to expand...
Click to collapse
can u please share the link?
Sky hawk recovery project is nice imo https://forum.xda-developers.com/poco-f1/development/recovery-skyhawk-recovery-project-t3905564
Ashiq.makkar said:
there's so many, not sure which one I should choose
Click to expand...
Click to collapse
I always stick to the TWRP as many other build's are twrp driven!
twrp3.3.0 official is out but it has some touch issues to there has been twrp3.3.0-fixed-unofficial, which i am using NOW and its working perfect
please see this
https://forum.xda-developers.com/showpost.php?p=80122987&postcount=305
---------- Post added at 08:31 PM ---------- Previous post was at 08:16 PM ----------
Ashiq.makkar said:
can u please share the link?
Click to expand...
Click to collapse
https://sourceforge.net/projects/pitchblack-twrp/files/beryllium/
5july19 is the latest
YasuHamed said:
I always stick to the TWRP as many other build's are twrp driven!
twrp3.3.0 official is out but it has some touch issues to there has been twrp3.3.0-fixed-unofficial, which i am using NOW and its working perfect
please see this
https://forum.xda-developers.com/showpost.php?p=80122987&postcount=305
---------- Post added at 08:31 PM ---------- Previous post was at 08:16 PM ----------
https://sourceforge.net/projects/pitchblack-twrp/files/beryllium/
5july19 is the latest
Click to expand...
Click to collapse
is there any bugs with the unofficial twrp??
Ashiq.makkar said:
is there any bugs with the unofficial twrp??
Click to expand...
Click to collapse
I Believe they only changed the touch drivers! i never found so far any bugs (according to the level / command i execute) flashing custom roms & magisk.
YasuHamed said:
I Believe they only changed the touch drivers! i never found so far any bugs (according to the level / command i execute) flashing custom roms & magisk.
Click to expand...
Click to collapse
Having trouble flashing TWRP trough fastboot, keep getting a small white line at the top left corner. Any idea how to avoid this, and have TWRP installed as recovery?
I use the one which is on crDroid's sourceforge page. Its called TWRP 3.3.0 beryllium fixed. It works fine for me, decrypts and touch seems fine. I tried that 3.3.1 unofficial, but that couldnt decrypt for me, it wouldnt recognise my pattern.
https://sourceforge.net/projects/crdroid/files/beryllium/TWRP/
donk165 said:
I use the one which is on crDroid's sourceforge page. Its called TWRP 3.3.0 beryllium fixed. It works fine for me, decrypts and touch seems fine. I tried that 3.3.1 unofficial, but that couldnt decrypt for me, it wouldnt recognise my pattern.
https://sourceforge.net/projects/crdroid/files/beryllium/TWRP/
Click to expand...
Click to collapse
how about Twrp3.3.0-unofficial
this one
https://mega.nz/#F!bdwQVIyK!OWNLH72HNT-ecmC-vAVmPw
reference
https://forum.xda-developers.com/showpost.php?p=80122987&postcount=305
YasuHamed said:
how about Twrp3.3.0-unofficial
this one
https://mega.nz/#F!bdwQVIyK!OWNLH72HNT-ecmC-vAVmPw
reference
https://forum.xda-developers.com/showpost.php?p=80122987&postcount=305
Click to expand...
Click to collapse
do i need to flash DFE after flashing the recovery?
Ashiq.makkar said:
do i need to flash DFE after flashing the recovery?
Click to expand...
Click to collapse
I flash DFE after ROM & Kernel (i used different kernel(s)) and before Magisk
should i flash DFE and Magisk everytime after flashing a new kernel ? even if i have flashed magisk and DFE already
YasuHamed said:
how about Twrp3.3.0-unofficial
this one
https://mega.nz/#F!bdwQVIyK!OWNLH72HNT-ecmC-vAVmPw
reference
https://forum.xda-developers.com/showpost.php?p=80122987&postcount=305
Click to expand...
Click to collapse
i flashed it via fastboot and it's showing decrypt data
Ashiq.makkar said:
i flashed it via fastboot and it's showing decrypt data
Click to expand...
Click to collapse
try flashing DFE please!
and also please tell what rom was previously installed?
YasuHamed said:
try flashing DFE please!
and also please tell what rom was previously installed?
Click to expand...
Click to collapse
I've been on global stable miui.couldn't flash DFE because Data decrypted and couldn't access storage
orangefox by far the best recovery
pitt93 said:
orangefox by far the best recovery
Click to expand...
Click to collapse
tried it.having data decrypt problem
Always use latest TWRP.
UltraSphinx said:
Always use latest TWRP.
Click to expand...
Click to collapse
having touch issues