So, I have an Asus zf 2 ze500cl with cm 14.1 nightly and broken volume up button and the phone is stuck in bootloop so I can't enter recovery through ROM Manager or such. Is there a way to enter recovery without using volume up button, like through adb or something?
xJri17 said:
So, I have an Asus zf 2 ze500cl with cm 14.1 nightly and broken volume up button and the phone is stuck in bootloop so I can't enter recovery through ROM Manager or such. Is there a way to enter recovery without using volume up button, like through adb or something?
Click to expand...
Click to collapse
Connect your Android to PC.
Type, without quotes
"adb devices" then enter
Type,
"adb reboot recovery" then enter.
These commands boot your phone into recovery mode.
but, why adb didn't detect my device?
Have you enable usb debugging enable option in android setting developer option before you flash ROM.
no
Then you can not access adb.
Steps for getting into recovery mode without volume buttons:
1. Take the battery off
2. Plug the phone to a wall charger for at least one or two minutes.
3. Put the battery back on along with the battery door and don't touch any buttons.
- The orange led on the front will light up and stay on for a few seconds before the phone automattically gets into recovery.
I don't know it works or not. Give it a try.
but my phone has planted battery
Related
I got a tablet device (Omega OT107) I've rooted it using
Code:
ro.kernel.qemu
method.
Next I'm triying to flash Custom Recovery and my problems started here.
What I've tried:
1.
Code:
flash_image recovery
- no success process of flashing never ends
2. Install bootmenu to /data/bootmenu
3. Installed 2 different 2Init's
None of this worked or even had an impact on how device works (it always boots in android correctly).
I've tried to boot it to fastboot mode to flash recovery from there but there is a problem that I have.
Volume(up or down) + Power buttons starts device to Android not to bootloader (I've read you need to remove and reinsert battery to make it work, but device has a build in batery and needs to be taken apart to remove it so I did not tryed it)
Code:
adb reboot bootloader
- boots to what I think is a bootloader (screen is black(no light is comming out of it)) when connected to Windows PC it is seen as Android Bootloader Interface (Android-SDK driver).
Code:
fastboot devices
does not discover any devices, clicking volume or power button does nothing.
Code:
adb reboot recovery
- boots devices it what seems to be useless recovery mode. At start there is a standing android dude with fireball on his chest, and imidietly changes to a lying position with his chest oppened and an exclamation mark comming out of it (I've red it is ok and I need to press Volume(down/up) + Power buttons to open recovery menu but it does not happen).
My question is:
Is it normal to some devices bootloader to look like mine? How to make it discoverable to fastboot?
I had this issue and I fixed with "press all the buttons!" and suddenly I sow recovery menu...to factory reset. if it doesn't work repeat with rebooting with pin
Does someone knows a way how to hard reset this thing?? ^^
about firmware
Any idea where find the firmware for this tablet?
Mine is now freeze on recovery logo
hard reset OT107
1.Turn off our tablet.
2 We press the MENU button at the same time + POWER HOUSE click and hold
3.Wait until the Android image.
4.Then VOL + button and the POWER and appears to us to Recovery Mode
5.Navigation is Vol-i + and confirmed by pressing POWER.
basucally flashed a rom and it went bad and my phone wont boot, i can only get it into fastboot but plugging it in and holding volume up and i have no power button, so i cant select boot into recovery, is there any way i can through the cmd?
*edit*
I figured out how to boot to recovery, download a recovery img, and in fastboot cmd you go
Fastboot flash recovery_image_name.IMG
Then
Fastboot boot recovery_image_name.IMG
chansecombs said:
basucally flashed a rom and it went bad and my phone wont boot, i can only get it into fastboot but plugging it in and holding volume up and i have no power button, so i cant select boot into recovery, is there any way i can through the cmd?
Click to expand...
Click to collapse
Depends on which version of the official software/firmware you had installed. You might check out this:
http://forum.xda-developers.com/showthread.php?t=2230106
If you were on a KK set up then that recovery won't work.
es0tericcha0s said:
Depends on which version of the official software/firmware you had installed. You might check out this:
http://forum.xda-developers.com/showthread.php?t=2230106
If you were on a KK set up then that recovery won't work.
Click to expand...
Click to collapse
all i want to know is, when im in fastboot is there some kind of command line or any other way i can select recovery mode besides the power button? my power button is broken, and i cant turn on my phone to reboot into recovery due to me soft bricking it.
chansecombs said:
all i want to know is, when im in fastboot is there some kind of command line or any other way i can select recovery mode besides the power button? my power button is broken, and i cant turn on my phone to reboot into recovery due to me soft bricking it.
Click to expand...
Click to collapse
So when you turn it off, leave it set there for a bit (guess you would have to let it die at this point...), and hold Volume Up and plug in the USB cable to the PC - you don't get into Download Mode? But as far as booting to recovery without the power button and not able to boot into the OS...I can't think of a way. There are no fastboot commands to get to recovery and without it booting to anything but fastboot, there is no way to utilize adb commands either.
Hi,
I own galaxy s3 i9000, currently on custom rom. My phone automatically rebooted and got stuck on bootloop. If I am able to enter in recovery mode, i can wipe cache(which may can help to get out of bootloop). But the problem is I am unable to enter into recovery mode because phone's volume up button is not working and my phone auto reboots every time after power off or reinserting battery. Is there any other way to clear cache or enter into recovery mode?
I dont want to flash my stock rom via odin (because i didnt backup my some important apps and msgs), this will be my last option.
sorry for my bad english
The normal way I get my phone into recovery mode from the PC is using ADB and the command: "adb reboot recovery". However, I bet this won't work in your case for one of several possible reasons: depending on when the bootloop occurs in the boot process, the phone may never reach a point where ADB is able to see your phone in the first place; if this is happening after a flashing a new custom ROM, then also it's unlikely that USB debugging is turned and the PC is not yet authorized to connect with it over ADB.
Another thought, could your power button be stuck down? I had a GS3 SCH-I535 several years ago and the power switch went bad on it, it would keep rebooting, shutting down randomly, or I'd be unable to turn on the screen. I had a switch replaced and it was fine after that. I don't think it's normal for the phone to automatically boot up when you reinsert the battery, that's why I bring that up. Maybe you can wiggle the power button a bit and try to unstick it if that's the case.
I tried to remove and stick back the power button again, but still it didnt worked. By the way fixing power button will not help me to get into recovery mode as my phone's volume up button is also not working, and recently I found out that I cant enter into download mode too because when I press respective buttons (volume down + home + power) for download mode, it gives warning msg to click 'volume up' buttton to enter into download mode or 'volume down' to reboot. Therefore again volume up button is required to enter into download mode too. So the only option remained for me is to visit service center and fix the volume up button.
I accidently flashed the lineage 16 recovery instead of lineage 17.1 recovery. I tried to install the 17.1 update through updater but my phone stuck into recovery mode. Neither I can boot into bootloader nor to android. I can''t flash anything. Power + volume down and connect the cable also not working to go into bootloader. Even bootloader option within the recovery also brings me back to recovery mode. ...adb devices command is also showing "device offline". Any help will be appreciated.
you should start from the beginning
is your bootloader still unlocked?
stukka2006 said:
you should start from the beginning
is your bootloader still unlocked?
Click to expand...
Click to collapse
I can't go into fastboot mode. Is there any other way to check it?
Thank you @stukka2006 for replying me. I guess I saved my phone. So here what I did-
1. Extracted the stock firmware (Luckily I had one but can be found in the forum) and copied the dload folder to sdcard (as I was not able to access internal storage). (@stukka2006 your hint to start from the beginning)
2. Power off the phone and pressed Both volume buttons + power button simultaneously. After the vibration I left the power button while still holding both vol buttons till software update screen appears. But software update failed. So I just touched the reboot now option. The phone rebooted to fastboot mode.
3. I installed TWRP but was not able to reboot to recovery through commands and system reboot command brings me back to fastboot mode. So I again power off the device with cable connected and pressed both vol buttons. This time phone showed recovery screen (Should have worked with normal button shortcuts also, I guess) and I flashed the rom and rebooted normally.
Everything is working fine now except that I lost the data.
Happy you got all clear my friend !!!
[email protected]@wk said:
Thank you @stukka2006 for replying me. I guess I saved my phone. So here what I did-
1. Extracted the stock firmware (Luckily I had one but can be found in the forum) and copied the dload folder to sdcard (as I was not able to access internal storage). (@stukka2006 your hint to start from the beginning)
2. Power off the phone and pressed Both volume buttons + power button simultaneously. After the vibration I left the power button while still holding both vol buttons till software update screen appears. But software update failed. So I just touched the reboot now option. The phone rebooted to fastboot mode.
3. I installed TWRP but was not able to reboot to recovery through commands and system reboot command brings me back to fastboot mode. So I again power off the device with cable connected and pressed both vol buttons. This time phone showed recovery screen (Should have worked with normal button shortcuts also, I guess) and I flashed the rom and rebooted normally.
Everything is working fine now except that I lost the data.
Click to expand...
Click to collapse
You are quite lucky to have the stock ROM.
methuselah said:
You are quite lucky to have the stock ROM.
Click to expand...
Click to collapse
Yeah...who knows when you need it.
I tried going through recovery to bootloader, but that does not put me in download mode. Any other tips except Adb. Just thinking about what I can do in a boot loop or brick except wipe.
Arealhooman said:
I tried going through recovery to bootloader, but that does not put me in download mode. Any other tips except Adb. Just thinking about what I can do in a boot loop or brick except wipe.
Click to expand...
Click to collapse
If you're in recovery mode, you can use ADB to command a reboot to bootloader, which for most Samsung devices opens download mode as well - the screen is just black instead of green.
Getting into bootloader mode via the buttons depends on the device, but the universal method seems to be this:
Power device completely off, wait a minute or two
Hold both Volume + and - buttons, do NOT press Power
While holding Volume buttons, plug in USB cable connected to your PC
Device should start in download mode.
If you press Power, or connect the USB cable before holding the buttons, your device will just power on.
Going into bootloader does not put me into download. I ahead to use Adb reboot download and you can’t use Adb in stock recovery