Related
Ok guys this is my first overclocking app, including the following features:
Simple management of Processor Frequencies (Min and max)
Governors management with a gesture (Swipe down)
IO Schedulers management with a gesture (Swipe up) *new
Save as safe feature, wich means you have less chance to make some excesive overclock damage
Run at boot option
Visualization Settings
Requirements:
Android 2.2+
Kernel support for overclocking
Rooted device
Features planned:
-Profiles and notifications
-Voltage control (if kernel supports)
-AutoSet best config *new
Links at second post.
Some screenshots
02/04/2012 - v1.2
Fixed some fc while switching frequences on SeekBar
Fixed wrong sort of frequencies (now always from lesser to greater)
New ICS UI (only for ICS devices)
Almost done time / temperature profiles
Changed write method to command echo "frequency" > /sys/blah...
Current ram usage - 5MB, size 45.9KB
24/01/2012 - v1.1
Profiles implemented
Save as safe feature is better now (long click to show current saved)
Profiles (for now only battery level)
Notification system (also customizable led color settings*)
Independent performance settings submenu (for now just "pi" test, wich means a load test calculating pi number on loops)
Bugfixes and improvements
Current ram usage - 2.3MB, size 45.4KB
*This feature may not work on some devices
20/01/2012 - v1.0
First release
Official List of Current Working Devices:
Samsung Galaxy S / S2 - Fully working
Sony Ericsson Xperia Family - Fully working
Huawei U8800 (IDEOS x5) - Fully working
Milestone 1 - Fully working
LG Optimus One / 2X - Fully working
LG GT540 - Fully working
Which kernel is better for this app??
icerebro said:
Which kernel is better for this app??
Click to expand...
Click to collapse
That doesn't depends on kernel, app will adapt on any kernel if it support overclock (all kernels in mini and mini pro does support oc)
I've tested and works perfectly...!
I used with Naa Kernel and Rom
As soon as I set vlaue 768 and apply phone reboots. I this just me?
hey!! D4.
nice to see u again in this forum. thank you
Banwell13 said:
As soon as I set vlaue 768 and apply phone reboots. I this just me?
Click to expand...
Click to collapse
this happens to me too (not thru the app, i OC using CMsettings) some minipro's can seemingly go only upto 691 MHZ withh one oc module..
for example with nAa kernel i can go only upto 691Mhz but with zombipanic kernel i can go to 800Mhz dunno y...
hey! d4. i saw gpu overclock stuff in ur github sources. any progress??
siddardha21 said:
hey! d4. i saw gpu overclock stuff in ur github sources. any progress??
Click to expand...
Click to collapse
Nope, GPU clocks seems to be complex to mod. And now im not in vacations so my time is not a lot cuz im almost always busy
Good work D4!!
and the app it's really small 33KB!!
just suggestions:
1
it's possible to have the stability test in a single option too?
...not linked to the save as safe feature??
2
..to write somewhere the swipe options
just in case of memory loss
thanks
ciribaski said:
Good work D4!!
and the app it's really small 33KB!!
just suggestions:
1
it's possible to have the stability test in a single option too?
...not linked to the save as safe feature??
2
..to write somewhere the swipe options
just in case of memory loss
thanks
Click to expand...
Click to collapse
I will do your first suggestion, was already planned, the other one i dont know if is so relevant
It seems my kernel doesn't support over clocking
The sliders are not moving, I guess I will have to replace the kernel. which one do you suggest? I have an Arc S.
DeepUnknown said:
It seems my kernel doesn't support over clocking
The sliders are not moving, I guess I will have to replace the kernel. which one do you suggest? I have an Arc S.
Click to expand...
Click to collapse
Could you tell me your Kernel's name (even better upload a screenshot of about phone in settings)?, also 2 more things, is your phone rooted, and did you allow superUser permissions to simple OC ?
Hi,
I cannot choose any IO schedulers - I have only 'noop' in every governor.
HTC Desire Z here and my kernel is 2.6.35.14-Andromadus-Flinny-v1 (from Andromadus ICS v8 rom).
Any suggestion?
Greets & thx for the app!
can i use this to underclock stock kernel?
stemer said:
Hi,
I cannot choose any IO schedulers - I have only 'noop' in every governor.
HTC Desire Z here and my kernel is 2.6.35.14-Andromadus-Flinny-v1 (from Andromadus ICS v8 rom).
Any suggestion?
Greets & thx for the app!
Click to expand...
Click to collapse
Can you upload a screenshot?, that may be because your kernel only supports noop io scheduler.
EDIT: On my stock kernel with no custom io schedulers, the list is reduced, so that does means your kernel only supports Noop scheduler.
romy134 said:
can i use this to underclock stock kernel?
Click to expand...
Click to collapse
Im not sure, but i will try and say you
EDIT: Yes you can, but with the new version, will release soon. Also, sliders cant be moved if your kernel does not support overclock, but you can setup easily a powersave governor, wich will underclock your cpu
universal?
what devices does this app support? all androids running 2.2+ or just xperia? i would assume that with SetCPU mentioned in the op that it is universal, but wanted to make sure. TIA
esthernrob said:
what devices does this app support? all androids running 2.2+ or just xperia? i would assume that with SetCPU mentioned in the op that it is universal, but wanted to make sure. TIA
Click to expand...
Click to collapse
My aim is to make it universal and lightweight as hell! ill need support from all devices owners, for now, it should work on any device, anyway please test it. I will release a "more universal" version soon, im talking about 2 days, almost done now.
ok nice app but its been done alread about the exac same thing with NOFRILLS CPU thats out in the market for free and has been out longer and suports more languages . so dont know why this app got recognition on xda while nofrills cpu didnt and its been out longer... if anyone intrested look up nofrills cpu its the same thing ..... ps. im not tolling or hateing just thought id point it out ...
like in title, u guys know any other app that can change vdd voltage other than setxperia that works?
i've tried pretty much every apps like setcpu, voltage control, nofrills cpu control but none can actually modify vdd voltage value on my live walkman. some only can show but cannot edit, and some even prompt that kernel doesnt support voltage changing.
kernel doesnt support voltage changing
Click to expand...
Click to collapse
nuff said.
what is vdd? try system tuner
i think vdd is like undervolting,
this would depend on the kernel that is installed and need a certain app for chaging the voltage,
with x kernel this is possible with system tuner
dumraden said:
nuff said.
Click to expand...
Click to collapse
Your point is?
Every custom kernel in minis dev subforum do support undervolt by vdd changing. And it cant be change via setxperia. I just dont like setxperia, thats why I ask if other app can do it.
Im not that stupid to use stock kernel and try to change vdd.
Because xperia's are unlocked in a different way than other phones, its different when an app tries to read and change kernel based files.
Thats why i guess only setxperia is able to write and use the vdd levels properly, when other apps written mostly for HTC's and Samsung devices work on those devices but not ours.
Melander hit the sweet spot, system tuner can change voltage and its works! Thanks a bunch
hye im the one saying system tuner first =(
hazard_puppet said:
hye im the one saying system tuner first =(
Click to expand...
Click to collapse
no problem, here's your thanks!
Maya.Kernel.N4
I used most of the kernel options and finally decide to create for me which is exactly fit my needs.
Features,
- Android-eabi gcc 4.6
- init.d support
- Stock MPDecision binary
- Latest 3.4.y patches
- Synced with latest PM patches from CAF
- Latest Ondemand governor
- DT2W
- 50mV undervolted for all bins
- Cpu-boost from CAF to make smoother GUI
- Lower Brightness for saving battery
- A lot of performance tweaks / patches from CAF
Installation
fastboot flash boot boot<ver>.img
power off / on the device (to take effect updated cpu freq table)
Source
https://github.com/hihancioglu/kernel_msm
Downloads
http://forum.xda-developers.com/devdb/project/?id=3920#downloads
Thanks,
XDA:DevDB Information
Maya.Kernel.N4, Kernel for the Google Nexus 4
Contributors
ihancioglu, ihancioglu
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: 0.6.7
Stable Release Date: 2014-05-12
Created 2014-04-30
Last Updated 2014-06-06
Reserved for future use
Hi,
made for CAF or AOSP based ROMs?
It made for AOSP , especially for Stock rom.
Sent from my Nexus 4 using XDA Premium 4 mobile app
Try sticking to zip format...Most users find it easy and handy :good:
There is no difference between both format for me. If I create a zip version I will include my image file. So you can use flashify or bootloader. It is easier than recovery
Sent from my Nexus 4 using XDA Premium 4 mobile app
Looks promising, keep up your work, always good to see a new kernel here So no colour control atm?
I just focus the performance tweaks to make this kernel smoother. Also I am very pleased with stock colors. I am not a fan of contrasty looks. This very natural for me. Maybe I can add one of the color control patches in the future.
Sent from my Nexus 4 using XDA Premium 4 mobile app
I'd love to see gamma control as well... Fauxsound patch or sound gain from moob or Mirage kernels would be awesome too, kernel feels good, nice job
Sent from my Nexus 4 using Tapatalk
ihancioglu said:
I just focus the performance tweaks to make this kernel smoother. Also I am very pleased with stock colors. I am not a fan of contrasty looks. This very natural for me. Maybe I can add one of the color control patches in the future.
Sent from my Nexus 4 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yeah good point, please keep it clean and simple, there are enough overloaded kernels out there
It is no big deal to fork your repo and add my favorite calibration to build on my own, again thanks the kernel runs great!
ihancioglu said:
Maya.Kernel.N4
Features,
- Lower Brightness for saving battery
Click to expand...
Click to collapse
It's just what I need! Thank you brother.
I installed it yesterday and will rapport my experience.
Quick question, is it possible to make lower brightness?
Verstuurd vanaf mijn Nexus 4 met Tapatalk
Ümit said:
Quick question, is it possible to make lower brightness?
Click to expand...
Click to collapse
Do you mean that make automatic brightness settings to lower thresholds? or wanted to make lower brightness with manual setting?
Because If you set lowest brightness setting manually , you will see that screen darker than automatic setting.
Thanks,
ihancioglu said:
Do you mean that make automatic brightness settings to lower thresholds? or wanted to make lower brightness with manual setting?
Because If you set lowest brightness setting manually , you will see that screen darker than automatic setting.
Thanks,
Click to expand...
Click to collapse
your kernel is darker than normal. It's good for me. But can min brightness be more darker (on auto settings)?
(Yani en düsük ayar daha da düsük/az isikli olabilir mi?)
Ümit said:
your kernel is darker than normal. It's good for me. But can min brightness be more darker (on auto settings)?
(Yani en düsük ayar daha da düsük/az isikli olabilir mi?)
Click to expand...
Click to collapse
A new version is in my tests. That will lower brightness at all auto settings.
ihancioglu said:
- Stock MPDecision binary
Click to expand...
Click to collapse
Finally! Thank you for your kernel.:good::highfive:
A new version is a bit postponed as UKSM is getting a phone bit laggy and battery is drains much than normal usage. Also I could not find any improvement on performance or memory operations. So I have decided to remove UKSM. I am testing a new image , performance is better now. I will upload as soon as I decide it is stable enough.
Thanks,
ihancioglu said:
A new version is a bit postponed as UKSM is getting a phone bit laggy and battery is drains much than normal usage. Also I could not find any improvement on performance or memory operations. So I have decided to remove UKSM. I am testing a new image , performance is better now. I will upload as soon as I decide it is stable enough.
Thanks,
Click to expand...
Click to collapse
Looks tempting with all the CAF tweaks. will give it a shot. thanks for sharing your work.
will_chrome said:
Looks tempting with all the CAF tweaks. will give it a shot. thanks for sharing your work.
Click to expand...
Click to collapse
Yes, also there are a lot of Linux mainline fixes / performance tweaks.
Hopefully you will enjoy my build.
(a New version is looks stable for me, but I will test it at least end of the day. I will share it tomorrow.)
Thanks,
Hi,
I just realized that 3g/2g data connection stopped working after a while. Reboot solves this issue. Do you have anybody experienced this issue? Maybe my rom caused this issue but I want to sure.
Thanks,
ihancioglu said:
Hi,
I just realized that 3g/2g data connection stopped working after a while. Reboot solves this issue. Do you have anybody experienced this issue? Maybe my rom caused this issue but I want to sure.
Thanks,
Click to expand...
Click to collapse
I do not use 3g/2g, I use alwas wifi. Do you have stock drivers?
Hi there, this is the thread to share your rom and kernels setup and if also some mod that you use in your rome such as audio mod. Might be helpful for and the other users to try. Maybe some of you using MiUI Rom either chinese or global or xiaomi.eu or other MiUI based rom and maybe some of you using CM13 and aosp based rom.
Here is also some link for the kernels:
---------------------------------------------
Guyver Kernel
http://forum.xda-developers.com/redmi-note-3/how-to/kernel-test-guyver-kernel-t3494521
Radon Kernel
http://forum.xda-developers.com/redmi-note-3/development/kernel-t3414884
Agni Kernel
http://forum.xda-developers.com/red...nel-24-09-2016-agni-puremiui-mm-v1-4-t3468042
http://forum.xda-developers.com/red...ernel-25-09-2016-agni-purecm-mm-v1-6-t3469874
http://forum.xda-developers.com/red...kernel-02-10-2016-agni-purecm-n-v1-7-t3472640
ElementalX
http://forum.xda-developers.com/red...nel-elementalx-rn3-0-01-miui-android-t3455859
Neon Kernel
http://forum.xda-developers.com/redmi-note-3/development/kernel-neon-kernel-t3439667
Blaze Kernel
http://forum.xda-developers.com/redmi-note-3/development/kernel-blaze-kernel-1-t3424981/page152
------------------------------------------------------------------------------------------------------------------------
Some users like more battery backup on their device, some users like more performance on their device. So, which one is yours?
Share.... :highfive: Also it might be helpful if you share your kernel settings. Screenshot would be great :highfive:
My ultimate Kenzo-combo is:
1. Unofficial CM13 by Umang and DiamondBond. Why this over official CM13? Because I don't have to mess with all the camera fixes, everything is included by default. Plus as a bonus I get lightning-fast boot times and slightly quicker apps installation;
2. Radon V3.0.1 aka the most versatile, feature-rich and stable kernel for this device;
3. GovTuner 3.6 with the Balanced profile. The phone runs super-smooth while giving me solid 7-8 hours of actual use. Sure, I could go with more conservative settings and easily get 10-12 hours of SoT, but watching the phone stutter and lag is not for me.
4. Various little mods and adjustments, like the Goodix patch, build.prop tweaks ( disabling Camera2 API and bringing the LCD density down to 420 ), removing SoundFX libraries, heavily debloating the ROM and cleaning up some more system stuff like libraries and ringtones.
Overall this combo gives me the perfect day-to-day usage with no bullstuff, no crashes, no weird glitches and bugs. Everything is consistent, clean, smooth and stable.
CM14.1 can't come soon enough.
01_april said:
3. GovTuner 3.6 with the Balanced profile. The phone runs super-smooth while giving me solid 7-8 hours of actual use. Sure, I could go with more conservative settings and easily get 10-12 hours of SoT, but watching the phone stutter and lag is not for me.
4. Various little mods and adjustments, like the Goodix patch, build.prop tweaks ( disabling Camera2 API and bringing the LCD density down to 420 ), removing SoundFX libraries, heavily debloating the ROM and cleaning up some more system stuff like libraries and ringtones.
Overall this combo gives me the perfect day-to-day usage with no bullstuff, no crashes, no weird glitches and bugs. Everything is consistent, clean, smooth and stable.
CM14.1 can't come soon enough.
Click to expand...
Click to collapse
Wow, that is a lot work to do. Does the Gov Tuner same like L Speed And HEBF mod?
khairul H said:
Wow, that is a lot work to do. Does the Gov Tuner same like L Speed And HEBF mod?
Click to expand...
Click to collapse
Unfortunately, I haven't used either of those mods, so I can't compare.
But after installing GovTuner I noticed a signifcant increase in smoothness and fluidity with no real decrease in battery life / SoT.
01_april said:
4. Various little mods and adjustments, like the Goodix patch, build.prop tweaks ( disabling Camera2 API and bringing the LCD density down to 420 ), removing SoundFX libraries, heavily debloating the ROM and cleaning up some more system stuff like libraries and ringtones.
Click to expand...
Click to collapse
Can you explain how it improves? for example disabling Camera2 API? I use Denoisecamera (from this forum) but some options FC.. but the pictures are actually nice in my opinion... Would like to have a full working camera with at least a close enough quality to this app
Barnir said:
Can you explain how it improves? for example disabling Camera2 API? I use Denoisecamera (from this forum) but some options FC.. but the pictures are actually nice in my opinion... Would like to have a full working camera with at least a close enough quality to this app
Click to expand...
Click to collapse
It doesn't improve picture quailty, it improves the speed and responsiveness of the camera app. I don't care about picture quailty at all because I'm a student, so 99% of the pictures I take are textbooks, whiteboards and so on. I don't need any manual controls and denoise features for that. So, it improves the experience for me personally by making taking pictures faster and simpler.
01_april said:
It doesn't improve picture quailty, it improves the speed and responsiveness of the camera app. I don't care about picture quailty at all because I'm a student, so 99% of the pictures I take are textbooks, whiteboards and so on. I don't need any manual controls and denoise features for that. So, it improves the experience for me personally by making taking pictures faster and simpler.
Click to expand...
Click to collapse
I see, but would you use any other app for the purposes i said? i dont even know now how to unnistall that Camera because it is a flashable zip
I'm using AOSCP 7.1 and Agni Kernel 3.2 and i really like this combo
Another great combo is TeslaN 7.0 and Agni kernel
01_april said:
Unfortunately, I haven't used either of those mods, so I can't compare.
But after installing GovTuner I noticed a signifcant increase in smoothness and fluidity with no real decrease in battery life / SoT.
Click to expand...
Click to collapse
What about your Kernel settings? Governor? I/O scheduler, etc?
MurdererFight said:
I'm using AOSCP 7.1 and Agni Kernel 3.2 and i really like this combo
Another great combo is TeslaN 7.0 and Agni kernel
Click to expand...
Click to collapse
What about your Kernel settings? Governor? I/O scheduler, etc?
AICP + Agni with ondemand and noop + xposed with greenify Amplify and power nap 11-12 hour of screen
I use official CM13 + Guyver Kernel.
I prefer to have a better battery backup (2days) but not in lieu of a great decrease in performance. The phone doesn't shutter or lag, smooth and I get about 10h SOT
mehrshad.shafaghi said:
I use official CM13 + Guyver Kernel.
I prefer to have a better battery backup (2days) but not in lieu of a great decrease in performance. The phone doesn't shutter or lag, smooth and I get about 10h SOT
Click to expand...
Click to collapse
What about your kernel settings? do you keep it default or you tune a little bit? 10h seems interesting.
Barnir said:
I see, but would you use any other app for the purposes i said? i dont even know now how to unnistall that Camera because it is a flashable zip
Click to expand...
Click to collapse
Snapdragon Camera and Manual Camera come to mind, you can easily Google both of those.
khairul H said:
What about your Kernel settings? Governor? I/O scheduler, etc?
Click to expand...
Click to collapse
CPU governor - Interactive, GPU governor - Simple Ondemand with Adreno Idler turned off, I/O scheduler - Zen, forced FastCharge, speaker boost of +18, vibration level of 67%, disabled Fsync, TCP agorithm set to Cubic, Low Memory Killer set to Very Light, plus some color-calibration ( personal preference ).
######MINE KENZO CONFIGURATION###### ROM: - GLOBE MIUI dev 6.11.3- smiui.net
KERNEL -STOCK SMIUI
XPOSED
VIPER4ANDROID FX
HEBF TWEAKS
MIX THEME
MIUI TWEAKS BY SOLARWAREZ (THANKS FOR HIS AWESOME XMIUI APP
SOTS: -10H
OTHER ONES
1.RR 5.7.4
RADON
XPOSED
VIPER
Camlin3 said:
######MINE KENZO CONFIGURATION###### ROM: - GLOBE MIUI dev 6.11.3- smiui.net
KERNEL -STOCK SMIUI
XPOSED
VIPER4ANDROID FX
HEBF TWEAKS
MIX THEME
MIUI TWEAKS BY SOLARWAREZ (THANKS FOR HIS AWESOME XMIUI APP
SOTS: -10H
OTHER ONES
1.RR 5.7.4
RADON
XPOSED
VIPER
Click to expand...
Click to collapse
I am using Official TWRP 3.0.2-2 and I have officially unlocked my device, can I flash smiui rom with my recovery or should I have to install some other recovery? and I want to keep my recovery so I should check don't overwrite recovery while building my smiui rom?
Thank you,
Rescuremix 5.7.3 (MM) + radon kenzo 2.9.5 is great battery life+Better camera,,,
No bugs!!
Sorry my bad english
NX 10.4 + Radon 3.0.1 + amplify,greenify,powernap
Get around 11h SOT , 85k antutu 2GB model
And totally customisable with kernel adiutor
redminote3 said:
NX 10.4 + Radon 3.0.1 + amplify,greenify,powernap
Get around 11h SOT , 85k antutu 2GB model
And totally customisable with kernel adiutor
Click to expand...
Click to collapse
Stats dont work on m stable stock with onl greentif & gotuner. How to get stats in powernap?
Use BetterBatteryStats
I'm not responsible for any damage to your device. So be advised.
Kernel Features:
-CPU Overclocked (BIG cores to 2.01GHz (experimental, i should reduce and / or disable it if too many users notify instability in F5122 (that is my personal device));
-AdrenoBoost;
-Slimbus (Audio bridge) Overclocking;
-WCD9335 HiFi selector and tunnings louder audio at kernel side;
-WSA8810 tunnings for better and louder audio in speaker;
-CRC disabled;
-DTS Eagle sound integration;
-300 Hz instead 1 kHz for kernel timer (saves power);
-Boeffla Wakelock blocker;
-Quick charge tweaks (2100mA constant charging for QC 2.0 / 3.0 enabled chargers, drawing about 1,6 Amps from wall PSU);
-Tunned voltage regulators for CPU and GPU enabling High Power Mode;
-Kernel general optimizations;
-WIP: add klapse and kcal;
-Enable 160 MHz clock in crypto engine for faster crypto operations.
Special thanks to:
@stefanhh0 github user (idk what is the nick here, please, pm me and i add it if you want) for keeping a source with newer mainline (i guess) patches;
@franciscofranco for many commits that help us improving performance and saving power;
Sony AOSP team;
And others that maybe i forgot to tag here but all them are in the github code below:
https://github.com/LuizPauloDamaceno/kernel
Inside the zip that you can download below, you will find the initial release. You should flash it by fastboot and them reinstall magisk if you have it. Also, have two xml files that is a complementing of the audio tweaks in android side, enabling CLSH_LOHIFI mode in the audio processor and tunning volumes. From mic to headphones and speakers. The thermanager is the one that you should install it for improved thermal handle with this kernel. Dont worry, things shouldn't fry, but is not my fault if them fry. As another complemention, i've done a "userdata" partition for users who have 64 GB variants, like me. The AOSP is compilled for 32 GB i guess and we have only half of our full capacity. Flashing userdata (obviously, will erase your data partition and you will loose everything like is done in the first AOSP flashes if you dont do a back-up...) you will also have more free space
Kernel: fastboot flash boot boot.img
Userdata: fastboot flash userdata userdata.img
To copy the below files i like to use root explorer app, you can also do by adb. I'm open for suggestion of better apps too
mixer_paths.xml: copy it to /system/vendor/etc/mixer_paths.xml and change permissions to 0644 octal or rw-r-r.
thermanager.xml: copy it to /system/vendor/etc/thermanager.xml and change permissions to 0644 octal or rw-r-r.
The first versions i will not do the automated flashing because are the initial and testing releases, but if my plans goes ok for the next 15 days or in the worst case next month, i can do a twrp flasheable style to make our lives easier. For me, no random reboots, no overheating for normal use and battery stills ok. Report it your experience, i will appreciate to know! =D
https://androidfilehost.com/?fid=4349826312261806431
Hope you all enjoy this, guys!
Luiz
Download link edited.
LuizPauloDamaceno said:
Download link edited.
Click to expand...
Click to collapse
It's awesome that you still keep these kernels up to date. Really appreciate the work.
I've been switching between v14 and v33 of your extreme kernels today for GPU testing. Didn't expect to see a kernel for Pie. I hope you'll update the one for Oreo as well, it's always great to see new changes. Thanks again!
Could this one be used with LineageOS 16 Custom Rom by chippa?
LOLisLIFE said:
It's awesome that you still keep these kernels up to date. Really appreciate the work.
I've been switching between v14 and v33 of your extreme kernels today for GPU testing. Didn't expect to see a kernel for Pie. I hope you'll update the one for Oreo as well, it's always great to see new changes. Thanks again!
Click to expand...
Click to collapse
I've stopped oreo because I didn't see any advantages to me to keep it updating, i do this for fun and based in my use. Now i'm using pie, so, i think is fare to start a Pie project...
justfun598 said:
Could this one be used with LineageOS 16 Custom Rom by chippa?
Click to expand...
Click to collapse
I dont know, i dont have sure if could be used because maybe the drivers are different. If the LiOs uses 3.10 kernel then dont, you cant, because the drivers of 4.9 kernel is quite different.
justfun598 said:
Could this one be used with LineageOS 16 Custom Rom by chippa?
Click to expand...
Click to collapse
LineageOS 16 by chippa uses 3.10 so no, I'll not boot.
@LuizPauloDamaceno i'll test it on the we with aosp 10 instead (already built against 4.9 kernel) and see how it behaves) thanks for your work.
ParanoidNemo said:
LineageOS 16 by chippa uses 3.10 so no, I'll not boot.
@LuizPauloDamaceno i'll test it on the we with aosp 10 instead (already built against 4.9 kernel) and see how it behaves) thanks for your work.
Click to expand...
Click to collapse
Thank you for the test! I will stay in AOSP Pie for a while since i've built mine one following the sony's tutorial for now. Wainting for the results
So, who tested it the first release? Any observations? soon i will post the second release with some improvements.
I tested the first release on AOSP pie. The battery life is quite good but i needed to set big cores frequency back to 1.8, because the phone heats up a little bit. I also noticed a bug but i don't know if it's due to the rom or to the kernel: sometimes (not too frequently) the system ui force closes without any message. The screen becomes black and after a few seconds it turns on with lockscreen.
Anyway, as wel as in other roms, Whatsapp voice notes are very quiet; can this be solved with mixer path?
Thank you for your effort
Lihxor said:
I tested the first release on AOSP pie. The battery life is quite good but i needed to set big cores frequency back to 1.8, because the phone heats up a little bit. I also noticed a bug but i don't know if it's due to the rom or to the kernel: sometimes (not too frequently) the system ui force closes without any message. The screen becomes black and after a few seconds it turns on with lockscreen.
Anyway, as wel as in other roms, Whatsapp voice notes are very quiet; can this be solved with mixer path?
Thank you for your effort
Click to expand...
Click to collapse
When you say voice notes are not very quiet you say about noise or too loud?
About the frequency, yes, the higher frequencies is intended to who wants to play certain games with higher performance or just perform better other applications, but everything has the "dark side". In some AOSP roms (i think all) you have random reboots because the 1.95 GHz is enabled without any overvoltage, so, the clock cannot be sustained by the system and the CPU crashes. I recommend if you want to use these clocks to have a fan in a joystick for example... And if you use is only the daily, use the stock frequencies. =D
About the lockscreen and sysui stop answering, i've also observed this without kernel modifications. So i think can be something from ROM or kernel that isn't related to hardware changes. Can be investigated. For 3 days now that this problem not showing here...
LuizPauloDamaceno said:
When you say voice notes are not very quiet you say about noise or too loud?
About the frequency, yes, the higher frequencies is intended to who wants to play certain games with higher performance or just perform better other applications, but everything has the "dark side". In some AOSP roms (i think all) you have random reboots because the 1.95 GHz is enabled without any overvoltage, so, the clock cannot be sustained by the system and the CPU crashes. I recommend if you want to use these clocks to have a fan in a joystick for example... And if you use is only the daily, use the stock frequencies. =D
About the lockscreen and sysui stop answering, i've also observed this without kernel modifications. So i think can be something from ROM or kernel that isn't related to hardware changes. Can be investigated. For 3 days now that this problem not showing here...
Click to expand...
Click to collapse
Thanks for the answer. Btw, i meant that voice notes are quiet, so their volume is too low to be heard
Can anyone do a benchmark using antutu and stock 4.9 kernel (not this one) just to compare it? Following screen from next version that I should post soon. With 4.9.224 Linux and many more features.
LuizPauloDamaceno said:
Can anyone do a benchmark using antutu and stock 4.9 kernel (not this one) just to compare it? Following screen from next version that I should post soon. With 4.9.224 Linux and many more features.
Click to expand...
Click to collapse
I took this one a year ago with Omni and 4.9 kernel, I recall performance was terrible on all 4.9 ROMs back then.
On your run I noticed that CPU scores is still lower than stock 8.0 with 3.10 kernel (that one got 46k on CPU and 17k on GPU), but I think it's better than anything we have currently.
By the way @ParanoidNemo how was the kernel running on AOSP 10?
iH8Ecchi said:
By the way @ParanoidNemo how was the kernel running on AOSP 10?
Click to expand...
Click to collapse
Been stuck with a lot of work and not tried yet. Will report as soon as I've time to try it.
iH8Ecchi said:
I took this one a year ago with Omni and 4.9 kernel, I recall performance was terrible on all 4.9 ROMs back then.
On your run I noticed that CPU scores is still lower than stock 8.0 with 3.10 kernel (that one got 46k on CPU and 17k on GPU), but I think it's better than anything we have currently.
By the way @ParanoidNemo how was the kernel running on AOSP 10?
Click to expand...
Click to collapse
Interesting, thank you for feedback. Yes... CPU score in 4.9 kernels is lower than 3.10. I think is something related to KPTI mitigations or something else... Concerning you're using OMINI rom... Is the wifi thetering working well? I have troubles with AOSP related with that and i thinks is not related to kernel. Thank you.
LuizPauloDamaceno said:
Interesting, thank you for feedback. Yes... CPU score in 4.9 kernels is lower than 3.10. I think is something related to KPTI mitigations or something else... Concerning you're using OMINI rom... Is the wifi thetering working well? I have troubles with AOSP related with that and i thinks is not related to kernel. Thank you.
Click to expand...
Click to collapse
I did this run a year ago, haven't tested that yet. I've since switched to Lineage GSI (with Sjll's modified 4.9 kernel), and tethering/hotspot works fine.
Just flashed on latest AOSP pie by vknecht and it's work like a charm. No major bugs by far, rom is stable and fast, phone doesn't get really hot even without underclock. Im staying on it because ViPER4Android working with this setup unlike on LOS 16.
adi_adi said:
Just flashed on latest AOSP pie by vknecht and it's work like a charm. No major bugs by far, rom is stable and fast, phone doesn't get really hot even without underclock. Im staying on it because ViPER4Android working with this setup unlike on LOS 16.
Click to expand...
Click to collapse
Have you some random reboot or not with the aosp9 by vknecht?
ParanoidNemo said:
Have you some random reboot or not with the aosp9 by vknecht?
Click to expand...
Click to collapse
Well, random reebots still occur unfortunately, but most on demanding tasks. I'm not an expert, but I don't think this is a kernel issue.