Related
When i call any1 i can talk to them Flawless But When i put my call on Speaker i can hear them but my voice doesn't goes to them When i put it back on my Ear remove from speaker they can hear me ? Even at Skype i call them on Video call they can't hear my Removed from Speaker they can hear me Help me Experts
More info.
What rom /firmware?
Rooted?
Any mods installed that has caused this?
Did it work before?
andrewwright said:
More info.
What rosecond handmware?
Rooted?
Any mods installed that has caused this?
Did it work before?
Click to expand...
Click to collapse
Android 4.1.2
Non Rooted
No Mods installed in it idk Because i buyed it second hand
might be a minor problem since your saying that regular calls are working..
well there will be a option to disable the mic on speaker may be its enables (i hope it there)
try make a call and check it out
thuva06 said:
might be a minor problem since your saying that regular calls are working..
well there will be a option to disable the mic on speaker may be its enables (i hope it there)
try make a call and check it out
Click to expand...
Click to collapse
Where I the option are you talking about Mute? No it's not mute Please help me
Tell me sum thing Good that make my Speaker mic Work
Go black to stock with Odin. If problem is still there it's hardware
This is a thread for posting your issues/solutions relating to ANY custom ROM for the HAM2. I'll try to format this top post in a somewhat similar way the index is. Below shall be a list of links pointing to issues/confusion/guides/solutions, or just known issues.
If you are posting issues, please check to see it already isn't in this thread.
If you are posting bugs about the OS, please use the original thread. It will be easier for the developers to see your bugs. This is not for requests. If you are trying to modify your phone but are having problems, post here!
PAC ROM by thenameisnigel
Issues
Solutions
CarbonROM by CarbonROM
Issues
Solutions
CM12.1 by u-ra
Issues
Viper4Android not recognizing headphones
ADB not working Fixed! Check solutions list.
Solutions
How to get ADB working
How to install Xposed
Reserved
First lol
Ok so here's a new issue. I plug in headphones and they connect. Then it says Headphones disconnected, but audio still plays through. This causes Viper to not work because it also thinks there are no headphones plugged in.
MikeyLee said:
First lol
Ok so here's a new issue. I plug in headphones and they connect. Then it says Headphones disconnected, but audio still plays through. This causes Viper to not work because it also thinks there are no headphones plugged in.
Click to expand...
Click to collapse
Before you installed Viper, did you try listening to music through headphones long enough to know this didn't exist then?
ScoobSTi said:
Before you installed Viper, did you try listening to music through headphones long enough to know this didn't exist then?
Click to expand...
Click to collapse
Yes. They work fine. But the device thinks they become disconnected. It's headphones with a mic on them that are doing it. Speakers work and headphones without a mic work and Viper works because they don't appear as disconnected.
Unfortunately my best ones are my Sol Republic V10's and they are affected.
MikeyLee said:
Yes. They work fine. But the device thinks they become disconnected. It's headphones with a mic on them that are doing it. Speakers work and headphones without a mic work and Viper works because they don't appear as disconnected.
Unfortunately my best ones are my Sol Republic V10's and they are affected.
Click to expand...
Click to collapse
Do you have any other headphones with mics to try? Seems odd that only that kind is affected.
Sent from my Ascend Mate 2 using XDA Free mobile app
ScoobSTi said:
Do you have any other headphones with mics to try? Seems odd that only that kind is affected.
Sent from my Ascend Mate 2 using XDA Free mobile app
Click to expand...
Click to collapse
3 pairs with mics and after I plug them in the says headphones disconnected. Like I said they still have sound but since the device shows them DC'd then so does Viper. Sol V10's, V8's and Beats Solo 2 all with Mics. JBL earbuds w/o a mic work fine, external speakers work fine. It's got to be a driver issue of some sort. Not with Viper but with the ROM
---------- Post added at 09:43 PM ---------- Previous post was at 09:23 PM ----------
It's when there is a headset control in the live that it does it like on the headphones I have. When I plug in a headphone splitter first and then the headphones, which in turn disables the headset controls, it doesn't do it
Guys, I still can't send adb commands in USB debugging mode. Just before I installed the CM ROM I was using the adb to reboot, push, pull etc.. Now, when I connect the phone, I can't. I checked device manager and saw a yellow icon near 'ascend mate 2'. For some reason, the phone driver had disappeared. That might be the problem. I had the Huawei drivers that come with JB. I installed them to no avail. I have another computer which has Google drivers already installed. I plugged the phone and the result was the same.
@medwatt did you install HiSuite from Huawei website. That's the only way I can get adb to work with Windows 8.1 or 10.
---------- Post added at 06:33 AM ---------- Previous post was at 06:31 AM ----------
I'll be home around 9 and will plug my phone in to see if it registers on adb. But I had the driver issue before and the only way to resolve it was install HiSuite
superbass311 said:
@medwatt did you install HiSuite from Huawei website. That's the only way I can get adb to work with Windows 8.1 or 10.
---------- Post added at 06:33 AM ---------- Previous post was at 06:31 AM ----------
I'll be home around 9 and will plug my phone in to see if it registers on adb. But I had the driver issue before and the only way to resolve it was install HiSuite
Click to expand...
Click to collapse
That's what I had to do also use HiSuite.
superbass311 said:
@medwatt did you install HiSuite from Huawei website. That's the only way I can get adb to work with Windows 8.1 or 10.
---------- Post added at 06:33 AM ---------- Previous post was at 06:31 AM ----------
I'll be home around 9 and will plug my phone in to see if it registers on adb. But I had the driver issue before and the only way to resolve it was install HiSuite
Click to expand...
Click to collapse
Yes, adb has always been working. It only stopped working after I installed CM. Also, HiSuite is designed to work with the Huawei ROM. So, it won't work on a non Huawei ROM.
medwatt said:
Yes, adb has always been working. It only stopped working after I installed CM. Also, HiSuite is designed to work with the Huawei ROM. So, it won't work on a non Huawei ROM.
Click to expand...
Click to collapse
ADB is working you need to go into settings/developer options/ and enbale root access for apps and adb then enable android debugging after that. Its working for me on Windows 10.
Man, everything is activated. I've been using adb long enough to know what is required to get it working. Check the attached image. Do you have some driver that I need to install. I have always just plugged the phone to the computer and adb was ready to go. The only driver I ever installed was the Huawei driver that came with JB 4.3. Apart from the low speaker volume and this adb issue, the ROM has been very smooth and bug free so far.
MikeyLee said:
3 pairs with mics and after I plug them in the says headphones disconnected. Like I said they still have sound but since the device shows them DC'd then so does Viper. Sol V10's, V8's and Beats Solo 2 all with Mics. JBL earbuds w/o a mic work fine, external speakers work fine. It's got to be a driver issue of some sort. Not with Viper but with the ROM
---------- Post added at 09:43 PM ---------- Previous post was at 09:23 PM ----------
It's when there is a headset control in the live that it does it like on the headphones I have. When I plug in a headphone splitter first and then the headphones, which in turn disables the headset controls, it doesn't do it
Click to expand...
Click to collapse
I honestly don't know. I didn't install Viper and my ear buds w/ mic work. Did you try changing the compatibility mode, or making it system app? Don't know if those will help.
medwatt said:
Man, everything is activated. I've been using adb long enough to know what is required to get it working. Check the attached image. Do you have some driver that I need to install. I have always just plugged the phone to the computer and adb was ready to go. The only driver I ever installed was the Huawei driver that came with JB 4.3. Apart from the low speaker volume and this adb issue, the ROM has been very smooth and bug free so far.
Click to expand...
Click to collapse
Yeah I installed HiSuite too but adb doesn't work for me either on Windows 10. I have those settings enabled too.
Sent from my Ascend Mate 2 using XDA Free mobile app
And you installed 15 second adb with Samsung drivers?
---------- Post added at 10:28 AM ---------- Previous post was at 10:27 AM ----------
Install 15 second adb, install HiSuite and then do a restart. Just tried it on a random windows 8.1 workstation
@xordos has a solution! Added to OP.
superbass311 said:
And you installed 15 second adb with Samsung drivers?
---------- Post added at 10:28 AM ---------- Previous post was at 10:27 AM ----------
Install 15 second adb, install HiSuite and then do a restart. Just tried it on a random windows 8.1 workstation
Click to expand...
Click to collapse
I have Minimal ADB and Fastboot installed.
Everything is working well so far from my short testing.....Only thing I can't seem to get working is transparent nav/status bars on Nova. Anyone got a work around with xposed or anything?
ArkAngel06 said:
Everything is working well so far from my short testing.....Only thing I can't seem to get working is transparent nav/status bars on Nova. Anyone got a work around with xposed or anything?
Click to expand...
Click to collapse
If all else fails. Apex Launcher is working
I don't think it warrants a new thread, so I am posting it here.
How to do volume boost on the new CM12.1 builds (rear speaker)
Since I am fairly sure that Viper is not working on this CM12, and I needed something to boost the unbelievably low speaker volume, I decided to do it the simplest way I know how, by editing the mixer_paths.xml file.
Instructions(easy):
Using a root explorer, navigate to /system/etc/, find the file "mixer_paths.xml" file. Rename to "mixer_paths.xml.orig".
Place this file in that same directory>>> Modded mixer_paths.xml (make sure the permissions match the original)
Reboot. Done.
Instructions(manual):
Using a root explorer, navigate to /system/etc/, find the file "mixer_paths.xml" file. Create a backup of this file named "mixer_paths.xml.orig".
Open the original 'mixer_paths.xml" file in a text editor, and find the line that says
Code:
<path name="speaker-lite">
Six lines below that, you should find this line
Code:
<ctl name="RX3 Digital Volume" value="84" />
change it to
Code:
<ctl name="RX3 Digital Volume" value="91" />
Reboot. Done.
If it's too loud for your liking, what with speaker crackling and whatnot, you can always change the 91 to something like 90 or lower. I would not go above 95 however.
What volume does it boost? Rear speaker and ear piece?
Hello,
After install LineageOS on a2017g it's not possible to work headphones, even jack/plug in doesnt show on the os, only on audio fx. Do you know any solution for this? The speaker works very well.
Any help...
Thanks,
Bart
smoothsapphire said:
Hello,
After install LineageOS on a2017g it's not possible to work headphones, even jack/plug in doesnt show on the os, only on audio fx. Do you know any solution for this? The speaker works very well.
Any help...
Thanks,
Bart
Click to expand...
Click to collapse
Just to make sure I got this right, there's no sound with headphones plugged in?
Correct!, Even the headphone icon doesn't appear on the system.
smoothsapphire said:
Correct!, Even the headphone icon doesn't appear on the system.
Click to expand...
Click to collapse
By default the icon is hidden, which can be enabled via Settings>Status Bar. As far as the sound go, you might have to do a factory reset or a clean flash.
Ye i did this, even check without google gaps and nothing ;( no sound via headphones on stock work normal.
smoothsapphire said:
Ye i did this, even check without google gaps and nothing ;( no sound via headphones on stock work normal.
Click to expand...
Click to collapse
You might have to get some help from the LOS thread.
---------- Post added at 10:14 AM ---------- Previous post was at 10:13 AM ----------
smoothsapphire said:
Ye i did this, even check without google gaps and nothing ;( no sound via headphones on stock work normal.
Click to expand...
Click to collapse
Go to LOS thread and ask there, they might be able to help you further.
Ok thanks!
Hey guys!
So I wrote up this post over on the XDA Portal on how to increase the headphone jack volume on the OnePlus 6. I then realised when I updated my device that that change had reset. As a result, I spent a couple of minutes putting together a Magisk module to make that change for you. It works for every OOS version released so far. Just download it below, install it in Magisk and you're good to go! It should work on custom ROMs, but I haven't tried that yet.
Google Drive
I have also made a module which enables acervenky's stereo speaker modification too.
Google Drive
Let me know if there are any issues
Works like a charm!
Could you make another one with the value at 95
nill0r said:
Works like a charm!
Could you make another one with the value at 95
Click to expand...
Click to collapse
Sure thing! I'm out at the moment but I'll be sure to do it later. I'll label them in the post
Why dont't you upload it to magisk itself?
Can you make a version that works with the latest stereo speakers mod (v3) ?
sorry
how can i remove OP6-Stereo_Magisk_Headphone_Jack this mod!
iou9999 said:
sorry
how can i remove OP6-Stereo_Magisk_Headphone_Jack this mod!
Click to expand...
Click to collapse
Uninstall it from magisk
Deleted
Harsh Keswani said:
Deleted
Click to expand...
Click to collapse
Okay so it did work for me, but it only works for YouTube, not for the stuff downloaded. Whenever I play downloaded music from my music player, it doesn't sound loud, rather it sounds the same. Is there any way that I can increase the volume from my music player?
Is there anything you could do about the Bluetooth volume? That would be really appreciated mate. Thanks!
Morning, when I try to download the file on my OnePlus 6 it's saying it's an unsupported file type
Regards
Adam_Conway said:
Hey guys!
So I wrote up this post over on the XDA Portal on how to increase the headphone jack volume on the OnePlus 6. I then realised when I updated my device that that change had reset. As a result, I spent a couple of minutes putting together a Magisk module to make that change for you. It works for every OOS version released so far. Just download it below, install it in Magisk and you're good to go! It should work on custom ROMs, but I haven't tried that yet.
Google Drive
I have also made a module which enables acervenky's stereo speaker modification too.
Google Drive
Let me know if there are any issues
Click to expand...
Click to collapse
This really sucks because I have the same problem. I'm using a systemless root with Magisk and I can't directly edit the mixer path file without it reverting. Likewise, I'm unable to load this .zip file in Magisk because it says unsupported file. Any idea how I'm supposed to get this working? I'd really like to see if adjusting this to 90 would help drive my B&O H6 headphones!
marriusf81 said:
Is there anything you could do about the Bluetooth volume? That would be really appreciated mate. Thanks!
Click to expand...
Click to collapse
This would be great, Bluetooth headphone users don't get the flar2 gain control so we can only alter volume with v4a, which doesn't output enough imo
Thank you brooooooo this world great! :highfive:
Why don't just use V4A FX? it will loud all system volume, you can choose between headphones and speaker and can perform every changes or just loud up the volume...just a suggestion
Guy's, just rename name of the file, for example boost.zip and everything is fine, flashing on magisk work like a charm.
Doesn't work on havoc rom latest version 13/11 bootloop
NeroNext said:
Why don't just use V4A FX? it will loud all system volume, you can choose between headphones and speaker and can perform every changes or just loud up the volume...just a suggestion
Click to expand...
Click to collapse
Because v4a isnt systemwide. It breaks on notifications without another magisk module to patch that, and the gain is limited, and the effects arent reliable, they tend to randomly do "Processing: No"
---------- Post added at 04:31 AM ---------- Previous post was at 04:30 AM ----------
Jeewee77 said:
Doesn't work on havoc rom latest version 13/11 bootloop
Click to expand...
Click to collapse
Works good on 14/11 build
efinityy said:
Because v4a isnt systemwide. It breaks on notifications without another magisk module to patch that, and the gain is limited, and the effects arent reliable, they tend to randomly do "Processing: No"
---------- Post added at 04:31 AM ---------- Previous post was at 04:30 AM ----------
Latest version is systemwide, and yes is limited butquite loud in my opinion, never have any issue, but i was just wandering why, don't wanna start a discussion about this OT
Click to expand...
Click to collapse
NeroNext said:
efinityy said:
Because v4a isnt systemwide. It breaks on notifications without another magisk module to patch that, and the gain is limited, and the effects arent reliable, they tend to randomly do "Processing: No"
---------- Post added at 04:31 AM ---------- Previous post was at 04:30 AM ----------
Latest version is systemwide, and yes is limited butquite loud in my opinion, never have any issue, but i was just wandering why, don't wanna start a discussion about this OT
Click to expand...
Click to collapse
Its systemwide in a Sense, but not really, There is audio ducking on notifications, hence the module "notification_helper remover"
And v4a hasnt Been updated in years, only some People modded the ui and Called it new, unfortunatley There hasnt Been anything touched in v4a's processing in years
Click to expand...
Click to collapse
Hello All,
I have recently purchased my device from Flipkart.
I had not noticed this problem when it was on Oreo as it was recently bought and I updated but after the update to Pie when I am on voice call and go on speaker I face crazy distortion and echoing.
This does not happen on Video Calls on speakers but only on voice calls on speakers.
I am currently on PEJMIXM build. Has anyone faced this problem?
I have checked many forums but not much assistance from it.
Hard reset has been done but with no change.
Please advice what can be done. I have contacted Mi care but that was not helpful either.
Any help is appreciated.
Thanks.
I havebthe same problem. I have distortion while in call on any rom. About echo i have no problem with latest stable build.
Sent from my POCOPHONE F1 using Tapatalk
What are you doing about it? It seems to me that it is a software problem. Because if it would have been a hardware problem it would have done the same with video calls on speaker.
After this 10.3.5 update i too have the same problem. The call automatically goes to speaker whether its an incoming or an outgoing
same here
Ironicfreak said:
After this 10.3.5 update i too have the same problem. The call automatically goes to speaker whether its an incoming or an outgoing
Click to expand...
Click to collapse
i too have the same problem any solution ??
---------- Post added at 04:03 PM ---------- Previous post was at 03:55 PM ----------
King_huzi52 said:
Hello All,
I have recently purchased my device from Flipkart.
I had not noticed this problem when it was on Oreo as it was recently bought and I updated but after the update to Pie when I am on voice call and go on speaker I face crazy distortion and echoing.
This does not happen on Video Calls on speakers but only on voice calls on speakers.
I am currently on PEJMIXM build. Has anyone faced this problem?
I have checked many forums but not much assistance from it.
Hard reset has been done but with no change.
Please advice what can be done. I have contacted Mi care but that was not helpful either.
Any help is appreciated.
Thanks.
Click to expand...
Click to collapse
actually google chrome is making the issue try removing it using adb or tool that xiaomi has
i have removed the chrome from my device after that restart the device and tadaaaaaaa phone is working like a charm again