Hello, I'm newbie at smartphones modifications, however I appriciate freedom that gives rooted Android. Hence, I have decided to root my phone Basically, I used Odin 3.10.6 plus SpaceX-Kernel_MM_RC2.1_G920F.tar.md5 plus TWRP-3.0_MM_S6_by_ManhIT.tar.md5 plus SuperSu
The problem is i got stucked at TWRP loop, I have managed to boot the phone with the help of: Minimal ADB and Fastboot with 2 commands: "adb reboot recovery" and "adb reboot bootloader". However, everytime now, when I reset to factory settings or when I try to enter to the TWRP Recovery it loops again and i have again use Minimal ADB and Fastboot. I use Samsung Galaxy s6 SM-G920F with Android 6.0.1.
Could you please help me solving this problem? I will be very gratefull.
You should use Odin to reinstall the original firmware and start over. You should be able to root by just using the appropriate TWRP and the newest SuperSu zip from Chainfire. Make sure to do a nandroid backup in TWRP before rooting so you have an easy way to restore the phone if something else goes wrong.
Thank you very much for the answer. Could you please describe the procedure step by step? I'm not fluent in computing, especially smartphones. I think it will help other users and guests as well, since google shows that many users have similar problems. I m keen to learn Android system.
These steps are all over the place, including the forum for your phone, which is why I didn't bother posting more concrete instructions.
You'll find more info here:
http://forum.xda-developers.com/galaxy-s6/general/stock-firmwares-sm-g920f-k-l-p-s-t-t3317826
If your phone had a newer firmware than posted on that thread, then you might need to find a newer update.
There are plenty of YouTube guides as well. It's the same for any newer Samsung phone with the only differences being which version of Odin or which firmware you need.
Related
So, I've stupidly let my son try and flash a custom rom on his generic chinese tablet (Cambridge Sciences StarPAD 9 SE) and he found a few very similar spec tablet roms on the internet which said they require TWRP to be installed before flashing. So he's installed that, rebooted into recovery but the TWRP doesn't fit the screen in terms of resolution size. Now, that's not the main problem. The main problem is that the touch screen doesn't work at all within TWRP so I can't select any of the options. Whenever I power off the device and power it back up, it reboots to TWRP and doesn't boot to the main ROM. He said that it did originally reboot to the ROM whenever he first installed the TWRP because he said that it was the only way of getting to the recovery. So I thought that I could just use ADB and just force a reboot from there but off course, there is no ADB device driver to be found on the internet.. well not that I can find anyway.
I'll attach a photo for you guys and hopefully someone can help me with this as I've spent the best part of 2 days trying to figure out a fix but am now stuck.
I'm now able to access the device by adb however I don't know what to do from there.
Any help?
Does anyone have any firmware for this device? I can't find anything on the internet at all. If I could get a firmware img then the device will be fixed.
The build number from the firmware is: fiber_evb-eng 4.1.1 master 20130530
the command is "adb reboot" AFAIK
Did he take a nandroid backup before flashing? It looks like a version of twrp that is not compatible with the tablet was installed. Not every device supports touch screen recovery mode. Can you use the volume rocker to navigate?
I can almost guarantee you won't find the firmware for a Chinese tablet. I've just been trying to help someone in a similar situation but the best we could manage was a ROM that had lots of glitches.
Edit how did he flash TWRP if it was incorrectly flashed ie: fastboot flash boot recovery.img instead of fastboot flash recovery recovery.img then that may produce a device that would boot straight into TWRP. I've heard of that happening on a nexus 7
Sent from my C5303 using xda app-developers app
Recently I attempted to root my Nexus 9 (running 6.0.1, latest OTA update) using this guide: phandroid.com/2014/11/05/how-to-root-nexus-9
It didn't go so well and I ended up in a bootloop after completing the steps. I managed to resolve this by following the steps on the Google Developer Factory Images page using the latest Nexus 9 (Wi-Fi only) image (I did not re-lock the bootloader, however).
After this, the device booted fine, however it is not rooted (apps cannot get root access and rootchecker and supersu both state that it is not rooted). I would appreciate some help here, as I am not sure where I went wrong (for example does flashing the factory image de-root?) or how to gain root from here. Most of the guides I have seen are for android 5.0, and I am not sure if the software used/linked is still compatible. I am not planning on moving away from stock android on this device, so a custom recovery is not necessary for me, and most guides include installing CWM or TWRP (I'm not against this, I just figured it's not necessary.)
If anyone could link any guides that are still valid (or tell me what to do) it would be much appreciated!
That guide is way out of date and links you to wrong files. Flashing factory images will remove root.
Get latest TWRP image .
Boot your device to bootloader mode. Attach to PC issue this comand "fastboot boot <name of twrp.img>".
Have latest supersu.zip on your device before hand. Use the Temporarily booted TWRP to install that zip.
corkiejp said:
That guide is way out of date and links you to wrong files. Flashing factory images will remove root.
Get latest TWRP image .
Boot your device to bootloader mode. Attach to PC issue this comand "fastboot boot <name of twrp.img>".
Have latest supersu.zip on your device before hand. Use the Temporarily booted TWRP to install that zip.
Click to expand...
Click to collapse
Thanks! I've just gotten around to following your instructions, and that was totally painless. Much simpler and faster than anything I found elsewhere, too (Guess all the guides I found were hopelessly outdated).
Will this method work for all current devices (assuming I have the correct TWRP, of course)?
@Sithon
Should work with most nexus devices.
Other devices may have locked bootloaders and need different methods to root. Check the device forum.
Hi all,
So i am no developer and never will be but I do like to understand what i am doing, why i am doing it when I see instructions on the internet. I have just been flashing an unofficial custom LineageOS 15.1 ROM on my Samsung Galaxy A3 2017 and suffice it to say that took hours of working out what i need and I am still not entirely sure I was hoping someone could explain it in simple plain english?
I have seen videos on how to create a custom ROM based on ASOP and read a guide about including hardware drivers before you compile. I guess if the vendor (ex. Samsung) they make their drivers for the hardware open source and you can get them that is a big plus, but i guess those drivers is not everything, i can imagine bootloaders, recovery, root etc etc also plays a role?
So when i wanted to flash my Samsung Galaxy A3 (2017) i go on to XDA and look for my phone and scroll through the forum. Only to find out not that many roms for that model. probaly down to popularity
Anyway i was instantly overwhelmed regarding unlocking the OEM bootloader, installing TWRP recovery and then root the device with SuperSu, installing ODIN etc etc.
So i wonder could anyone explain all this in much simpler steps? I mean the process i read was basically this:
Enable developer options
enable OEM unlock
Install TWRP using ODIN but i also needed something named RMM-State_Bypass.zip ?? not sure what this is this needed to go on SDCARD
reboot phone into download mode and using ODIN to flash TWRP recovery
Boot into TWRP recovery and flash that RMM-State Bypass file
Then i had to root using SuperSU (is Magisk not preferred now?). but for this i was asked to download SuperSU and a "no-verify-opt-encrypt-6.0" file. which I am not sure what is. then put them on SDCARD and boot into TWRP recovery
Then i had to format data reboot into recovery and then flash RMM_State again from above, then flash that "no-verify-opt-encrypt-6.0" file followed by flashing the SuperSU zip file.
Now reboot device and I was root.
Now what the heck did i just do with those files and why is root needed when i shortly after had to copy LineageOS 15.1 to the SD card. boot into recovery and wipe "system, data, dalvik, cache" and then flash custom ROM followed by GAPPS.
When you wipe System, data, cache and dalvik. does that not undo the root we did above? I do not understand
I guess those no-opt-verify file and RMM State bypass probably has something to do with bypassing some Samsung stuff on the device. but really i would love for someone to take the time to write something up in plain simple english, or if this has already been done point to it so that i can read it.
Probably completely crazy but i would love to do a personal CUSTOM ROM for Samgung Galaxy A3 (2017) based on AOSP with GAPPS and thats it. obviously drivers from Samsung so the hardware works. I am fairly certain that following guides on the internet i could create my custom rom, provided that i have the samsung drivers. but i have no idea really what i am doing and why in order to install TWRP and root etc
Feel free to PM me if you feel like that instead
anddd use magisk.
Hi everyone!
I'm using a Samsung gt-n8010. It could be done for due to the age, but maybe there is still hope.
My problem is that the tablet boots always to TWRP recovery and I can switch to download mode as well. Everything seems all right, internal storage and sd card shows exactly how they should, BUT... I can't do anything in TWRP. If I have the Keep system partition read only unticked, it still says the storage is read only and /data/media is not accessable. I can see it and access it with TWRP File manager. I tried flashing ROM and Recovery, also stockROM with Odin, but Failed. Clearing Cache, Data, Dalvik... also ends up with error. Format Data works, and also changing the partition types, but when I reboot device, it all comes back the same as before, no changes take effect. In Download mode I tried to use Adb from computer terminal, but it was stuck saying 'Waiting for device'. If Tab is in Recovery my PC shows both internal storage and sd card, but the internal storage is empty when I open it.
For details: I use Lineage OS 18.1 with TWRP 3.6.1_9-0. On my computer I use Linux Mint 20.3, but I tried with a laptop using Win10 as well, no success.
I've read many solutions on 'Unmodified system partition' or some had 0MB internal storage problem, but in my case that is different, as I have them all, but it seems all is read only and not accessable. I even tried to have the last Backup (2 month old) set using Restore of TWRP, but during the process, the tablet reboots and TWRP comes up again. I can't even turn it off, as TWRP comes up after some minutes.
Please help me somehow to be able to use the Tablet. If you need any further details, just tell me.
TWRP is not out yet on android 12, if you have it as of writing it wont be able to unencrypt your device. So all you can do is use it to install roms (YOU MUST FIRST FACTORY RESET THE DEVICE).
I also have never used odin as I have prefered adb
Code:
adb shell
/sbin/recovery --wipe_data
/sbin/recovery --update_package=SDCARD:romname.zip
adb should work in twrp?
I see your point. I intended to change/downgrade LineageOS version, but I was not successful. Now I am not able to do a factory reset either with success from TWRP, but I give a try to your adb codes. Give me some time
leathan said:
TWRP is not out yet on android 12, if you have it as of writing it wont be able to unencrypt your device. So all you can do is use it to install roms (YOU MUST FIRST FACTORY RESET THE DEVICE).
I also have never used odin as I have prefered adb
Code:
adb shell
/sbin/recovery --wipe_data
/sbin/recovery --update_package=SDCARD:romname.zip
adb should work in twrp?
Click to expand...
Click to collapse
Hi, I gave a try to that code both on TWRP and Linux terminal (from PC). But no effect First I did a FactoryWipe (successful) and went back to the Terminal each time. I tried with ROM zip and TWRP img as well, but after rebooting, TWRP 3.6.1 comes back again. I downloaded Lineage OS 17.1 (with GAPPS pico) and TWRP 3.5.0-9. It seems somehow I got stuck with that TWRP 3.6 and all I get on every attempt of flashing or wiping is it can't see '/data/media (No such file or directory)' or 'Unable to make /cache/recovery: Read-only file system'. I hope there would be a solution to get my system out of Read-only state
Nektarin87 said:
Hi, I gave a try to that code both on TWRP and Linux terminal (from PC).
Click to expand...
Click to collapse
Do you have adb installed and do you see your phone when you type "
Code:
adb devices
"
Usually its as simple as just booting into TWRP -> Factory reset then install the rom and done.
Maybe you do need odin but im pretty sure you can use adb instead like I outlined above, I hated using odin but if you find the right file it should also fix your issue.
What is the codename for your tablet? I cant find it on lineageos's site, what guide did you use its an official lineageos im assuming?
leathan said:
Do you have adb installed and do you see your phone when you type "
Code:
adb devices
"
Usually its as simple as just booting into TWRP -> Factory reset then install the rom and done.
Maybe you do need odin but im pretty sure you can use adb instead like I outlined above, I hated using odin but if you find the right file it should also fix your issue.
What is the codename for your tablet? I cant find it on lineageos's site, what guide did you use its an official lineageos im assuming?
Click to expand...
Click to collapse
Well, I have adb installed, but as my Tablet can only load in recovery it says like these:
adb devices
List of devices attached
4107cd04a2b611b5 recovery
When I load Odin or fastload mode (Download mode as tablet says) I can not list it with 'Fastboot device" command. It says 'waiting for device'.
My tablet is Samsung gt-n8010 (10.1) and I follow this thread to make changes:
LineageOS 16.0 Android 9 for GT-N8000 GT-N8010 GT-N8013 GT-N8020 FINAL VERSION EOL
/* * Your warranty is now void. * * I am not responsible for bricked devices, dead SD cards, * thermonuclear war, or you getting fired because the alarm app failed. Please * do some research if you have any concerns about features included in...
forum.xda-developers.com
I had Lineage OS 18.1 installed and maybe what caused the issue is that I did not update the TWRP, or we do not have a TWRP ready for it yet, but currently I have TWRP 3.6.1_9-0 installed and stuck with. As I mentioned, on rebooting tablet always starts with TWRP, asking if I want system read only or not with an Unmodified system partition heading. I can not boot OS at all, I can go to Download mode, but Odin always failed indicating my system is read-only.
Ok yes your device is listed as recovery because it has not booted anything. I'm not sure if the commands I gave work without the system actually booting however.
After you entered adb commands there was no error text?
Also if you cant get odin to recognize your phone (RUN IT AS ADMINISTRATOR) you should figure out that first as thats a last resort fix when you really mess things up which I dont think you have yet. I think you must have something off in your configuration if its not reading anything make sure u can access another phone to rule out your pc, but get this working asap.
Usually if your device boot loops you can wipe the cache, and now days remove magisk modules.
If your device still boots straight to recovery It should be as easy as I outlined above, try not isntalling the apps/plugins after the initial rom, and again make sure you wipe cache/data before hand.
If your device boots straight to the bootloader then your left with Odin.
Man I hate video guides. But it looks good (unless he forgot to wipe) should have been as simple as that. He does not however provide you with the firmware (not rom) file that I believe you are going to need if you improperly downgraded the android a full version number. Post on his youtube and find that firmware file and fix your odin connection and flash it. If odin is also dead I have no idea but I have never in nearly 20 years had a phone fully brick even when I try to brick them. But I know it can be possible but your most likely going to recover from this.
If he doesn't respond just read more and learn, you may need some specific large file though to flash over what I believe may now be missing partitions entirely.
Maybe someone else here can help too. Good luck!
leathan said:
Man I hate video guides. But it looks good (unless he forgot to wipe) should have been as simple as that. He does not however provide you with the firmware (not rom) file that I believe you are going to need if you improperly downgraded the android a full version number. Post on his youtube and find that firmware file and fix your odin connection and flash it. If odin is also dead I have no idea but I have never in nearly 20 years had a phone fully brick even when I try to brick them. But I know it can be possible but your most likely going to recover from this.
If he doesn't respond just read more and learn, you may need some specific large file though to flash over what I believe may now be missing partitions entirely.
Maybe someone else here can help too. Good luck!
Click to expand...
Click to collapse
Hi there, I actually find some videos or instructions useful and some helped me out a lot. But as always, things can only be proper if anyone is qualified to do it or when you have the exact same issue on the device. Now back to my case...
I tried many ways, many aspects, but none helped me out. There was this good and working Samsung 10.1 gt-n8010 and one afternoon I found it turned off. When I charged it for a while I turned it on and all it could load is TWRP and I could not do anything. It seems to be working, but I could not see internal storage, while it showed all the 12 GB amount I had, so the issue is not that it shows 0 GB like in many videos. I tried to wipe cache, data, system, even change partition types, all ended with a fail saying my 'system is read only'. I also tried to use Odin and Heimdall to flash new recovery and ROM, also gave a chance to stockRom with android 4.1 or 4.4, but in all cases it said FAILED. To conclude all: I think it could be a hardware issue and as the machine is more the 10 yrs of age, it would not be a surprise, but it's a same it can't be flashed.
If anyone had a similar issue or may have suggestions I'm all ears and the thread remaines, but I am out of ideas at the moment and put my Samsung tab on the shelves.
Hi, I've just bought a Cubot P50, it's a Chinese brand and seems more than decent for the price, I've rooted it with Magisk and I want to install TWRP on it but can't find anything for that brand. Has anyone came across a TWRP that might work on it?
Marko Lyno said:
Hi, I've just bought a Cubot P50, it's a Chinese brand and seems more than decent for the price, I've rooted it with Magisk and I want to install TWRP on it but can't find anything for that brand. Has anyone came across a TWRP that might work on it?
Click to expand...
Click to collapse
I have the same phone how did you root it ? If there a guide that is safe to use ? Thank you
Unlock the bootloader first, this step will factory reset your phone https://romprovider.com/unlock-bootloader-android/
On your PC:
1. Install Fastboot driver
2. Install MediaTek_Preloader_USB_VCOM_Drivers_Setup_Signed
3. Extract platform-tools
4. On your phone, Enable Developer Options, USB debugging and OEM Unlocking
5. Unlock bootloader (this step will factory reset your phone): Phone in fastboot mode, open command prompt on PC > fastboot devices > fastboot flashing unlock. Note this will cause the phone to show the "Orange State" warning on boot up. You can ignore this or remove it later.
(If device is unauthorised in ADB or Fastboot, go to Developer Options on phone, revoke USB debugging authorisation, disable then enable USB debugging. You should now get an authorisation confirmation dialogue when you try to connect with ADB/Fastboot. If not, type "adb kill-server", then "adb devices" or "adb start-server" in the command prompt).
6. Place boot.img on phone with USB file transfer (either from stock ROM, or read from phone using SP_Flash_Tool_v5.1924_Win) and patch it with Magisk v5.2. NO need to patch vbmeta.img
7. Transfer patched boot.img back to PC
8. Flash the patched boot.img to phone either with SP Flash Tool or Fastboot command in ADB (fastboot flash boot boot.img). Take care here, make sure it's the right image going to the right location and that ALL other files are de-selected, especially the preloader file, always de-select this when flashing any firmware unless you know what you're doing!
Phone is now rooted.
How to remove orange state warning on this device:
How to remove Orange, Yellow & Red state warnings on MTK
This guide will explain how to hide or remove Yellow, Red and Orange state warnings on a Mediatek Android device. Its ideal for those who feel irritated by constantly seeing these warnings on reboot.
www.hovatek.com
Edit: If you need a stock ROM for the phone it's here https://www.cubot.net/Support/id/78/cid/19.html#hh
Good evening, I would like to know if in the future it is possible to install a twrp with a custom rom?
Thank you have a nice day.
Good evening, I would like to know if in the future it is possible to install a twrp with a custom rom on the Cubot p50?
Thank you have a nice day.
Mark8:9 said:
Good evening, I would like to know if in the future it is possible to install a twrp with a custom rom on the Cubot p50?
Thank you have a nice day.
Click to expand...
Click to collapse
It is possible that in the future, developers may create custom ROMs and TWRP recoveries for the device, especially if it becomes popular among the Android community.
If a custom ROM and TWRP recovery becomes available for your device in the future, you will be able to flash it by following the instructions provided by the developer. Keep in mind that installing custom ROMs and recoveries comes with some risks, and it is important to backup your data and follow the instructions carefully to avoid damaging your device.
Good evening, can you tell me the correct procedure for how to Root the Cubot p50 smartphone? Thank you.
Mark8:9 said:
Good evening, can you tell me the correct procedure for how to Root the Cubot p50 smartphone? Thank you.
Click to expand...
Click to collapse
Well if you really want to know that, surely you would have read the entire thread? It's not that long. I gave complete instructions 5 posts up
Marko Lyno said:
Well if you really want to know that, surely you would have read the entire thread? It's not that long. I gave complete instructions 5 posts up
Click to expand...
Click to collapse
Good evening, be patient ... but where do I find Magisk 5.2 to download and how do I install it? Thanks good evening.
Download Magisk Manager Latest Version 26.1 For Android 2023
Magisk Manager is an app which helps users to root their phone. With the help of Magisk you can run banking apps and also pass SafetyNet tests.
magiskmanager.com
Just get the latest version and follow the instructions I posted.
Thanks for your work on the Cubot phone .Im a fan of them also. I found that twrp recovery 3.40 works on the Note 20/20Pro you just have to flash vbmeta BEFORE and AFTER you flash twrp to the device. Im also seeing separate websites claiming twrp 3.40 is also used with the Cubot P40 model. I dont see why it wouldnt work with the P50. Its worth a shot. Also theres alot more "familiars" with Mediatek phones like these in Hovatek forum. Since you already have information on how to root maybe consider starting your own P50 thread over there.
My references: https://www.hovatek.com/forum/thread-44810-post-233457.html#pid233457
elimoviebuff said:
Thanks for your work on the Cubot phone .Im a fan of them also. I found that twrp recovery 3.40 works on the Note 20/20Pro you just have to flash vbmeta BEFORE and AFTER you flash twrp to the device. Im also seeing separate websites claiming twrp 3.40 is also used with the Cubot P40 model. I dont see why it wouldnt work with the P50. Its worth a shot. Also theres alot more "familiars" with Mediatek phones like these in Hovatek forum. Since you already have information on how to root maybe consider starting your own P50 thread over there.
My references: https://www.hovatek.com/forum/thread-44810-post-233457.html#pid233457
Click to expand...
Click to collapse
Thanks for that. Is there a specific vbmeta to patch it with?
Good evening, can you give me the link to download a compatible cust recovery for the cubot p50? Thank you
The link is on the page just posted above. Here's the direct link to the file:
Hovatek
Download files
www.hovatek.com
Let us know if it works please, and what steps you took.
Good evening, how will I flash the lk file? Thanks.
Hi, you will have, or should have, downloaded a zip file containing a recovery.img. The recovery.img is the file you need to flash. Then follow the instructions here:
How to Install TWRP Recovery on Any Android 2022 [100% Working]
In this article, I will be showing you how you can install TWRP recovery on any Android smartphone. By following this guide you will be able to install
magiskapp.com
The TWRP Recovery file it refers to is the one you (hopefully) downloaded from this link:
Hovatek
Download files
www.hovatek.com
BUT, you also need to flash a vbmeta file BEFORE and AFTER the recovery.img, and I'm still unsure which vbmeta file it is, as elimoviebuff hasn't replied to my question regarding that.
Marko Lyno said:
Hi, you will have, or should have, downloaded a zip file containing a recovery.img. The recovery.img is the file you need to flash. Then follow the instructions here:
How to Install TWRP Recovery on Any Android 2022 [100% Working]
In this article, I will be showing you how you can install TWRP recovery on any Android smartphone. By following this guide you will be able to install
magiskapp.com
The TWRP Recovery file it refers to is the one you (hopefully) downloaded from this link:
Hovatek
Download files
www.hovatek.com
BUT, you also need to flash a vbmeta file BEFORE and AFTER the recovery.img, and I'm still unsure which vbmeta file it is, as elimoviebuff hasn't replied to my question regarding that.
Click to expand...
Click to collapse
I get it, but I have to flash the .bin to remove the yellow/red state on boot. I don't know how to install the lk.bin file. If you can help me. Thank you.
Ah I see, you're rooting the phone first. Ok I've just checked my own notes on this, so, if you have edited the lk.img file as described in that Hovatek thread, then do as follows:
When flashing with SP Flash Tool, make sure the correct lk.img file is chosen as SP Flash Tool chooses lk-verified.img by default (click along to the right of the file list under "Location" and choose your edited lk.img file here).
OR, flash with ADB (fastboot flash lk lk.img).
Then install Magisk on your phone if you haven't already.
boot.img is for rooting the phone, lk.img is only to remove the orange state message and the 5 second delay when the phone boots, it does not actually remove it's orange state and is not needed for the phone to be rooted.
To un-root, you should just flash the original boot.img and lk-verified.img from the stock firmware ROM file.
Marko Lyno said:
Ah I see, you're rooting the phone first. Ok I've just checked my own notes on this, so, if you have edited the lk.img file as described in that Hovatek thread, then do as follows:
When flashing with SP Flash Tool, make sure the correct lk.img file is chosen as SP Flash Tool chooses lk-verified.img by default (click along to the right of the file list under "Location" and choose your edited lk.img file here).
OR, flash with ADB (fastboot flash lk lk.img).
Then install Magisk on your phone if you haven't already.
boot.img is for rooting the phone, lk.img is only to remove the orange state message and the 5 second delay when the phone boots, it does not actually remove it's orange state and is not needed for the phone to be rooted.
To un-root, you should just flash the original boot.img and lk-verified.img from the stock firmware ROM file.
Click to expand...
Click to collapse
Good morning. Thank you for the information given.
I wanted to ask: is it necessary or useful to install an antivirus on your smartphone now that it's been rooted? Thank you.
I haven't but that's just down to personal choice really. It's certainly useful if you like to try stuff from unknown sources, although personally I've rarely encountered viruses on Android. I'm not saying they don't exist though.
Have you successfully rooted your phone then? What about TWRP, have you tried that yet?