Related
Just bought PAP 5044. Fantastic phone. Anyone have any ideas for rooting this phone, installing cwm???
Use Framaroot 1.6 (Boromir exploit) for rooting. It's pretty much "one click" stuff and works like a charm. Now, as for cwm, I still haven't found the solution. I just managed to boot to the stock recovery but none of the commands are working so no use there.
arsenique said:
Use Framaroot 1.6 ...stock recovery ...
Click to expand...
Click to collapse
Yeah framaroot works awesome. Stock recovery works too. Commands are little funny. Entering everything ith volume up, volume down is for down
Finally got CWM working. The procedure of installing is fairly simple but I had to browse through few czech and russian forums to get the recovery.img.
This procedure doesn't need PC at all. Everything is done on your phone. Just follow these few simple steps.
1. First of all, you should be rooted. If not, use Framaroot to do that (fairly simple to do and pretty much "one click" stuff)
2. Next, install MobileUncle MTK Tools (available here )
3. Now, download the attached recovery.img and transfer it to the root of your SD card.
4. Open MobileUncle and grant root permission if asked.
5. Once it is open, choose "recovery update" on the main screen.
6. You should be able to see your recovery.img first on the list. Below are some other recovery images found online but DO NOT chose those.
7. When tapped your recovery.img it will ask "use recovery file: recovery.img (5620Kb)?" - tap Yes.
8. Within seconds, it is flashed and it will ask if you want to reboot to recovery... choose Yes.
9. That's it. You have fully functional CWM
Now, if you want to backup your device in CWM please note that the backup folder may grow pretty large if you are using SD Ext (which is pretty much a must with this device) so make sure that you have enough space on your SD card before you perform backup.
P.S. browsing through the czech and russian forums, I've found couple of pretty functional ROMs (there are few MIUI ports and one Xperia C port). I'm going to test those in the next couple of days and if it works, I'll share it here.
Cheers.
Disclaimer: I am NOT a developer! I am NOT responsible if you brick your device or if anything goes wrong!
Any new custom roms for this device? Cant find anything out there about custom roms for this phone...
Puritanicall said:
Any new custom roms for this device? Cant find anything out there about custom roms for this phone...
Click to expand...
Click to collapse
Okay so i found this xperia ported miui rom for Prestigio 5044 and it works great . I would send a link but it's my first post here and I can't post outside links, just search google for "COLLECTION OF MIUI PORTED ROMS FOR VARIOUS DEVICES" and the first one should be it.
Then scroll down until you see prestigio 5044 and download.
I would like to know if anyone has got some other roms for this device.
unusualphone said:
Okay so i found this xperia ported miui rom for Prestigio 5044 and it works great . I would send a link but it's my first post here and I can't post outside links, just search google for "COLLECTION OF MIUI PORTED ROMS FOR VARIOUS DEVICES" and the first one should be it.
Then scroll down until you see prestigio 5044 and download.
I would like to know if anyone has got some other roms for this device.
Click to expand...
Click to collapse
Dont wanna risk with flashin' roms for now. I installed xPosed framework and changed everything i could
any custom rom for prestigio 5044 great phine
Sent from my PAP5044DUO using xda app-developers app
Check thread about Lava Iris 504q development, its a same phone..
Prestigio 5044DUO Development
Prestigio 5044DUO Development ( many roms )
androidpro.info/main/androidinsertion/prestigio5044/
pizzonia said:
Check thread about Lava Iris 504q development, its a same phone..
Click to expand...
Click to collapse
Too bad we can't flash their roms.. Prestigio done something to the bootloader so we can't boot their kernel properly. Probably by flashing Lava's uboot, we could do it. Effort oz for otg support that prestigio disabled
Sent from my PAP5044DUO using Tapatalk
Dear
Can you help me find original recovery image for Prestigio 5044 DUO? I would like to go back to original ROM but I can’t because I have CWM recovery instaled.
THX, BR
lolerpro8 said:
Too bad we can't flash their roms.. Prestigio done something to the bootloader so we can't boot their kernel properly. Probably by flashing Lava's uboot, we could do it. Effort oz for otg support that prestigio disabled
Sent from my PAP5044DUO using Tapatalk
Click to expand...
Click to collapse
hi to all,
i just fuond this thread and i hope that someone can help me.. Pleasee!
My first post and it's already a mess.
I explain my situation shortly:
I download framaroot and installed the boromir expansion, by the way everything until i made a mess. I deliberately deleted the browser that is a core application. The result is that the phone is blocked. I didn't done anything else. Now my pc won't recognize the phone, or to be more specific is still recognized but only in recovery mode, and activating "install from adb". The pc recognizes it like an htc dream.. Thanks to adb, i've tried to install the firmware version, in hoping to come back to the stock version and undo, but the installlation is completed but the phone still not workin.
When i turn on the device it starts with boot animation logos and then SOME it's not working and the phone is blocked.
Can someone save me?
thanks to all for reading me, and losing your time. I made a mess.
villo88 said:
hi to all,
i just fuond this thread and i hope that someone can help me.. Pleasee!
My first post and it's already a mess.
I explain my situation shortly:
I download framaroot and installed the boromir expansion, by the way everything until i made a mess. I deliberately deleted the browser that is a core application. The result is that the phone is blocked. I didn't done anything else. Now my pc won't recognize the phone, or to be more specific is still recognized but only in recovery mode, and activating "install from adb". The pc recognizes it like an htc dream.. Thanks to adb, i've tried to install the firmware version, in hoping to come back to the stock version and undo, but the installlation is completed but the phone still not workin.
When i turn on the device it starts with boot animation logos and then SOME it's not working and the phone is blocked.
Can someone save me?
thanks to all for reading me, and losing your time. I made a mess.
Click to expand...
Click to collapse
Flash custom recovery trough spft then flash some modified rom
lolerpro8 said:
Flash custom recovery trough spft then flash some modified rom
Click to expand...
Click to collapse
where i can find custom recovery and custom firmware?
can u please suggest me somenthing?
I also found driver so that spft can recognize my phone, but i don't know which one is correct and working properly.
By experience, the driver is called "mtk usb vcom port" or "usb preloader 65xx"???
Then i don't know how to use spft, it's my first time, and custom rom don't know what to choose
villo88 said:
where i can find custom recovery and custom firmware?
can u please suggest me somenthing?
I also found driver so that spft can recognize my phone, but i don't know which one is correct and working properly.
By experience, the driver is called "mtk usb vcom port" or "usb preloader 65xx"???
Then i don't know how to use spft, it's my first time, and custom rom don't know what to choose
Click to expand...
Click to collapse
Everything you need can be found here http://androidpro.info/main/androidinsertion/prestigio5044/ . To get to meta mode you need to compliantly turn off your device and connect it to the computer( with battery still inside)
lolerpro8 said:
Everything you need can be found here . To get to meta mode you need to compliantly turn off your device and connect it to the computer( with battery still inside)
Click to expand...
Click to collapse
I tried different version without flashing them, only by installing the zip, and i would like to install the last prestigio version, or a clean version with just root..
Is it possibile?
By the way everything seems to work with these custom roms, but not the phone itself, i have the broadband and imei, but it doesn't recognize the sim cards, to be more specific the IMSI number.
villo88 said:
I tried different version without flashing them, only by installing the zip, and i would like to install the last prestigio version, or a clean version with just root..
Is it possibile?
By the way everything seems to work with these custom roms, but not the phone itself, i have the broadband and imei, but it doesn't recognize the sim cards, to be more specific the IMSI number.
Click to expand...
Click to collapse
All the stock versions from the site are down. You need to get some othernrom. I prefer either miui or coloros. As for the other thing, if it doesnt work after flash its hardware related
lolerpro8 said:
All the stock versions from the site are down. You need to get some othernrom. I prefer either miui or coloros. As for the other thing, if it doesnt work after flash its hardware related
Click to expand...
Click to collapse
Yep indeed, infact i put again imei and now it's working, but the only thing i don't know which value to set in at for second sim. It's always hard! To me is a factory problem.
I've installed the bean version instead. It's working, i love it but i don't know exactly how to install\update xposed framework and gravity box tools. When u install, it magically appears on ur sd card a folder called "xposed disabled". It's still not working.
I would like to change columns in UI system.
villo88 said:
Yep indeed, infact i put again imei and now it's working, but the only thing i don't know which value to set in at for second sim. It's always hard! To me is a factory problem.
I've installed the bean version instead. It's working, i love it but i don't know exactly how to install\update xposed framework and gravity box tools. When u install, it magically appears on ur sd card a folder called "xposed disabled". It's still not working.
I would like to change columns in UI system.
Click to expand...
Click to collapse
Dude i cant help you with everything search before posting.
Greetings, I have a Archos 101b platinum tablet running kitkat and I have been searching around the internet but I just can't seem to find anything about rooting for my tablet.
I would really love to root it and make it possible for apps/games being installed on the SDcard and if possible get an adblock on it. but to do such things I seem to need root access but the amount of information on how to do it for this tablet is so minimal(None) it's driving me crazy.
If anybody is able to help me with this I would really appreciate it.
Extra info:
Android version: 4.2.2
Firmware version: 4.6
Kernel version: 3.3.0
Need Root
Really need helpon this topic guys!
I'm also trying to gain root (even if just temporary) on a 101b platinum, just to remove the google system/app guff.
I assume this is a Generation 10 tablet since it follows "GEN10 TABLETS" in the drop down list for documentation on archos's website.
What I found so far is;
To get to USB debugging you have to press Settings > About > Build, several times to get Developer options, which seems paranoid since ADB alone is nightmare to install and use.
adb root, throws an error about not allowed in production builds.
tried installing the SDE, but it seems the recovery firmware update only accepts ZIP files, so I tried zipping up the AOS file, but the update just errors with "wrong footer".
Tried the Paul/Modoco Gen9 root, but the /data/local folder is locked from user access afaics.
I'm thinking either forcing the SDE on somehow or a firmware mod is the direct solution to root, but I'd ideally like a less destructive version of modding.
Update:
Tried iRoot (formerly vRoot) and Kingo ROOT without any success.
Seems Kingo ROOT goes through known exploits to, I'm suspecting it's been locked down in newer Kitkat.
I doubt a patched firmware will be around until Archos issue a stock one (it's currently missing from the list)
Quick post;
I've noticed a few other people have had the Kingo ROOT crash the boot process on the Archos, and think it's bricked. It's not, if your tablet (or nearly any new consumer electronics) refuses to shutdown for any reason, press and hold the power button until the device powers off. I thought it was common knowledge, but it seems not.
qUE
I have the issue from KingoRoot that everytime I boot up the tablet starts from initial setup so I have to set it up every single time it is switched off.
Rom Archos 101b platinum
Hi guys,
I used king root on this tablet and it completely ruined it, everytime it boots it goes through the initial setup.
Basically i have the file here on my computer that will fix it but i cant find a site to upload it to. If someone can help me out with this i can provide the rom to fix what king root broke .
Regards
Rom Archos 101b platinum
I have the issue from KingoRoot that everytime I boot up the tablet starts from initial setup.
Could you help me?
Thanks.
Stock firmware restored
I restored original firmware of tablet and now it WORKS!
I can provide link to forum solution.
If there is solution to root this tablet, I appreciate it.
Thanks.
Bye,
Gianluca.
hi mate. How did you restore stock firmware? I am desperate to find the rom but there is nowere i can find it on the web. can you please help me??
smasher220 said:
hi mate. How did you restore stock firmware? I am desperate to find the rom but there is nowere i can find it on the web. can you please help me??
Click to expand...
Click to collapse
I send link to forum in PM.
Bye.
unfortunately when i try it it says "footer is wrong" and then "signature verification failed, installation aborted". Any suggestion??
noneid said:
I send link to forum in PM.
Bye.
Click to expand...
Click to collapse
Can you possible send the link to the stock rom to myself please as I just wish to get an ex display model back to factory default
Thanks
Recovery
xanadude said:
Can you possible send the link to the stock rom to myself please as I just wish to get an ex display model back to factory default
Thanks
Click to expand...
Click to collapse
Hi,
I am also trying to reset an ex display model, unable to get any settings options. Have followed instruction on Archos site to flash with stock rom but unable to get to work.
Could u send me link you have and any instructions to assist.
Archos 101b Recovery
Hi,
this is (french language).
archoslounge.net/forum/showthread.php?33555-ARCHOS-101b-PLATINIUM-Pb-au-démarrage[/url].
Bye.
noneid said:
I restored original firmware of tablet and now it WORKS!
I can provide link to forum solution.
If there is solution to root this tablet, I appreciate it.
Thanks.
Bye,
Gianluca.
Click to expand...
Click to collapse
Do you still have link to original load thanks
Link
xanadude said:
Do you still have link to original load thanks
Click to expand...
Click to collapse
This in the link to sw download:
update.archos.com/AFMv1/storage//files/full/ac101bpl/20140812.191729/update-allwinner.zip
Bye.
Error
noneid said:
This in the link to sw download:
update.archos.com/AFMv1/storage//files/full/ac101bpl/20140812.191729/update-allwinner.zip
Bye.
Click to expand...
Click to collapse
Hi,
I try to install via internal or external storage and get an error
"failed to verify, installation failed"
Can anyone help
update-allwinner
karl_1976 said:
Hi,
I try to install via internal or external storage and get an error
"failed to verify, installation failed"
Can anyone help
Click to expand...
Click to collapse
Same result for me too.. Any idea? Thanks
Error
rikk80 said:
Same result for me too.. Any idea? Thanks
Click to expand...
Click to collapse
Went and got a refund. Couldn't be bothered.
Hi, do you know where can I find complete ROM for Prestigio 4055?
Phone is probably bricked, only 1st screen after power-on.
CWM is installed and works properly.
Do you think, will be installation of complete ROM from SD card enough, or will I need to use "Smart Phone Flash Tool" software? In this case, what files need I to use?
Can you help me please?
Thanks
Zdendakr said:
Hi, do you know where can I find complete ROM for Prestigio 4055?
Phone is probably bricked, only 1st screen after power-on.
CWM is installed and works properly.
Do you think, will be installation of complete ROM from SD card enough, or will I need to use "Smart Phone Flash Tool" software? In this case, what files need I to use?
Can you help me please?
Thanks
Click to expand...
Click to collapse
If you haven't solved your issue yet, try this. It should work.
I was in the process of removing kingroot and installing supersu when my phone decided to reboot and now will not boot past the very first screen no matter how long I let it sit. I tried factory resetting it but that didn't change anything. I've searched high and low for firmware but have come up empty. Does anyone have stock firmware for the Alcatel Streak? Thanks.
archmagusdg said:
I was in the process of removing kingroot and installing supersu when my phone decided to reboot and now will not boot past the very first screen no matter how long I let it sit. I tried factory resetting it but that didn't change anything. I've searched high and low for firmware but have come up empty. Does anyone have stock firmware for the Alcatel Streak? Thanks.
Click to expand...
Click to collapse
Concur.
I had exactly the same problem. Alcatel Streak (40600) would not boot after I did KingRoot and superSu replacement.
There has been no activity on this or other Alcatel STREAK threads for some time, but for any members needing, I have a full stock ROM for the Cricket Alcatel STREAK (4060o), Android 6.0.1 Marshmallow. Any interested members please leave a comment and I will upload the ROM and post a download link.
i need the file for the streak 4060o
@Viva La Android
Viva La Android said:
There has been no activity on this or other Alcatel STREAK threads for some time, but for any members needing, I have a full stock ROM for the Cricket Alcatel STREAK (4060o), Android 6.0.1 Marshmallow. Any interested members please leave a comment and I will upload the ROM and post a download link.[/QUOT
Ive been able to aquire a stock firmware as well...the problem is after i flash with qfil it wont boot??? Qualcom qfil says download complete with no sahara errors..ive got the emmc programmer file if anyone needs... i just dont know what to do next to get it to boot
Click to expand...
Click to collapse
KtownJeff said:
@Viva La Android
Viva La Android said:
There has been no activity on this or other Alcatel STREAK threads for some time, but for any members needing, I have a full stock ROM for the Cricket Alcatel STREAK (4060o), Android 6.0.1 Marshmallow. Any interested members please leave a comment and I will upload the ROM and post a download link.[/QUOT
Ive been able to aquire a stock firmware as well...the problem is after i flash with qfil it wont boot??? Qualcom qfil says download complete with no sahara errors..ive got the emmc programmer file if anyone needs... i just dont know what to do next to get it to boot
Click to expand...
Click to collapse
I understand your dilemma. My stock ROM and firmware are installable via TWRP, which I have ported over from the Alcatel IDEAL (4060a). Flashing a firmware to this device without using a custom recovery is problematic to say the least. QFIL/QPST does not seem to work, and true to their typical protocol, TCL seems to have disabled fastboot mode on the 4060o. I will research this matter some more to see if I can help. There are reports of forcing the device into a hard brick by corrupting the /sbl1 bootloader partition. As such, Qualcomm's EDL (9008) mode is enabled which will allow for an emergency firmware installation per firehose protocol via QPST. But again, I'll try and research this more. Also, if you don't mind, could you share the firmware you have please? It sounds like you have an official package which I have not been able to locate. My ROM and firmware are both self compiled. Thank you.
Click to expand...
Click to collapse
awesome
Viva La Android said:
KtownJeff;80315069 [user=10059830 said:
@Viva La Android[/user]
I understand your dilemma. My stock ROM and firmware are installable via TWRP, which I have ported over from the Alcatel IDEAL (4060a). Flashing a firmware to this device without using a custom recovery is problematic to say the least. QFIL/QPST does not seem to work, and true to their typical protocol, TCL seems to have disabled fastboot mode on the 4060o. I will research this matter some more to see if I can help. There are reports of forcing the device into a hard brick by corrupting the /sbl1 bootloader partition. As such, Qualcomm's EDL (9008) mode is enabled which will allow for an emergency firmware installation per firehose protocol via QPST. But again, I'll try and research this more. Also, if you don't mind, could you share the firmware you have please? It sounds like you have an official package which I have not been able to locate. My ROM and firmware are both self compiled. Thank you.
Click to expand...
Click to collapse
https://mega.nz/#!BGwGFAgK!gW3ik2f_-oyI9MtER-PCrfSTQCio4CFzVWR6JVmSw_0
stock cricket Rom mm 6.0.1
@Viva La Android
...now let me tell you how this started to give you more info....I rooted with kingroot installed twrp for the 4060a with flashify and directly installed magisk 18 with twrp...somewhere in there i deleted king root...everything worked great..made a full back up through twrp..I had titanium backup installed deleated all the bloat and started on magisk mods..installed xposed as well...flashed viper4...well I got greedy and started trying to dirty flash pixie4 roms to get a higher os like oreo...fail fail fail...I had read in the forum not to tick fix permissions in TWRP but i did it anyway...never ending bootloop after that...i side loaded a custom rom for the 4060a ....hard brick...i guess thats when i was EDL mode because of the wrong bootloader...i tried to flash the cricket rom with qset\qfil and it would not work...then i flashed the stock 4060a and it worked...wouldn't boot past the splash screen...kinda weird though because the splash screen was split in half and reversed with a gap in the middle....ill figure out a way to screen shot later....but i was able to hook back into the pc and I have adb but unauthorized because the OS got factory wiped so no usb debugging...I do have fastboot access now...which is strange but since my oem unlock is not ticked in the OS every boot img recovery img or system img i try to flash acts all good then fail in fastboot....my realization is that I wiped my modem somewhere in there and it replaced it with a downgrade which forced the EDL mode...well I flashed wrong with the 4060a firmware so Im stuck is all I can figure...I cant get adb shell access either haven't tried
shell with ubuntu/python maybe i can get shell access to force feed super user and tick oem unlock for the bootloader...other than that Im stumped...Maybe DD commands and a good dump file to see where I stand...and as far as my TWRP backup goes..I got careless and deleated it when I formated my PC to remove all the crap Ive picked up trying to fix this mess off the MTK and GSM sites...
My main objective right now is to get my adb key authorized there has to be a way
Click to expand...
Click to collapse
Yeah I agree totally. If there was a way to enable the OEM Unlocking option from a shell environment, you would likely have total control of the device via fastboot protocol. Like you, I concur that there has to be a way. You have me perplexed enough to dig in and help find an answer. I have a working device and a bricked device, so I am free to experiment around on my brick using QFIL/QPST. I am impressed that you have been able to access fastboot. This is more progress than most people make, so congrats there. Nice work.
By the way @KtownJeff, if you need any partition dumps from my device, for example, /sbl1, /aboot, /rpm, /tz, etc., just let me know. Just a thought, but if you could push my /persist partition image to your device (my OEM Unlocking is enabled), I think your OEM Unlocking would tick enabled. I recall a Moto device where OEM Unlocking was enabled in a similar manner. @KtownJeff, if possible, please share a download link of the official firmware package to which you referred. I will be glad to share my self compiled firmware package and stock ROM. Thank you friend.
Viva La Android said:
Yeah I agree totally. If there was a way to enable the OEM Unlocking option from a shell environment, you would likely have total control of the device via fastboot protocol. Like you, I concur that there has to be a way. You have me perplexed enough to dig in and help find an answer. I have a working device and a bricked device, so I am free to experiment around on my brick using QFIL/QPST. I am impressed that you have been able to access fastboot. This is more progress than most people make, so congrats there. Nice work.
By the way @KtownJeff, if you need any partition dumps from my device, for example, /sbl1, /aboot, /rpm, /tz, etc., just let me know. Just a thought, but if you could push my /persist partition image to your device (my OEM Unlocking is enabled), I think your OEM Unlocking would tick enabled. I recall a Moto device where OEM Unlocking was enabled in a similar manner. @KtownJeff, if possible, please share a download link of the official firmware package to which you referred. I will be glad to share my self compiled firmware package and stock ROM. Thank you friend.
Click to expand...
Click to collapse
I actually stumbled on the fastboot accidentally!!...After I flashed the Stock 4060A firmware with the split up splash image I checked my driver to see if I was in qloader 9008 mode still and I saw the holy grail "Android Bootloader"...The phone screen didnt have anything showing on it like any moto mfastboot mode or like a samsung when hooked up to odin...just the frozen "half splash" Alcatel Logo..I had minimal adb/fastboot installed...I switched to the Android platform tools latest version and had better results...I had a lot of failures when it come down to recovery partition and system partition...I had some successes tho...Fastboot erase works but I dont know if thats standard and the OS reinstalls what I erased because of the lock..prob so just like no superuser access in ADB...I tried to re flash TWRP for like three days and gave up...I forgot to mention I have no stock recovery access.......Yes please I need a full phone dump of whatever you got... all the better..I might try shorting my board to get back to EDL so I can try flash the cricket 6.0.1 again...but I don't want to lose my fastboot access either....the 6040O aboot partion does not have fastboot... The Stock crickit 4060O rom link was posted earlier...I'm in the process of uploading to MEGA as we speak so here in a few I will post all my stuff for this phone...And please share yours as well...
stock Rom's and tools for Alcatel 4060A/O
@Viva La Android
TWRP Recovery https://mega.nz/#!QTwlESgJ!YSu6T5r93AonRiSxh6QQtov_ZDsxz95YW1RXYSuPJRQ
QSET/QSIL Qualcom all in one https://mega.nz/#!xSoSQCTK!MPQJytxtVUl4aHBXQp7wYbZb9o6ZpXX5wpTy3dqX7xA
Firehose Programmer file for QFIL/QSET https://mega.nz/#!EGQAXKBC!LfyE2zJzhXB15XeAgxB3H2HcL0OiXNa38V74ZodJf5I
Acatel Ideal 4060A AT&T Stock Firmware L 5.1.1
https://mega.nz/#!8ewAxCZS!sGURkuzmzcgbh6_AYOMyokzkx3VA74g50gYfZPFZOAA
Alcatel Streak 4060O Cricket Stock Firmware MM 6.0.1 https://mega.nz/#!BGwGFAgK!gW3ik2f_-oyI9MtER-PCrfSTQCio4CFzVWR6JVmSw_0
Fix BootLoop Alcatel Ideal
there´s any stock rom flashable for the alcatel ideal? i need unbrick my device because when i make a flashable stock rom the device boots and shows the screen for a second and after still bootlooping, i tried with QFIL but i have problems connecting the device, any way to fix? porting a rom with same chipset? or using another methods. PLZ i need unbrick my phone :crying:
KV2_URSS said:
there´s any stock rom flashable for the alcatel ideal? i need unbrick my device because when i make a flashable stock rom the device boots and shows the screen for a second and after still bootlooping, i tried with QFIL but i have problems connecting the device, any way to fix? porting a rom with same chipset? or using another methods. PLZ i need unbrick my phone :crying:
Click to expand...
Click to collapse
There was one here on XDA. It was a TWRP flashable Android 5.1.1 stock ROM I believe. The OP of the ROM is no longer on XDA and it appears that the download links are dead. I'll try to find you a copy of the ROM though.
---------- Post added at 09:43 PM ---------- Previous post was at 09:40 PM ----------
KtownJeff said:
@Viva La Android
TWRP Recoveryhttps://mega.nz/#!QTwlESgJ!YSu6T5r93AonRiSxh6QQtov_ZDsxz95YW1RXYSuPJRQ
QSET/QSIL Qualcom all in onehttps://mega.nz/#!xSoSQCTK!MPQJytxtVUl4aHBXQp7wYbZb9o6ZpXX5wpTy3dqX7xA
Firehose Programmer file for QFIL/QSET https://mega.nz/#!EGQAXKBC!LfyE2zJzhXB15XeAgxB3H2HcL0OiXNa38V74ZodJf5I
Acatel Ideal 4060A AT&T Stock Firmware L 5.1.1
https://mega.nz/#!8ewAxCZS!sGURkuzmzcgbh6_AYOMyokzkx3VA74g50gYfZPFZOAA
Alcatel Streak 4060O Cricket Stock Firmware MM 6.0.1https://mega.nz/#!BGwGFAgK!gW3ik2f_-oyI9MtER-PCrfSTQCio4CFzVWR6JVmSw_0
Click to expand...
Click to collapse
Oh thank you very much. I was in need of the 4060o official firmware package. I'm in debt to you. Thanks for all the extras as well! Nice. I will upload my stock partition dump of my 4060o and get that posted ASAP. Have you tried using an insecure boot image for ADB superuser (ADBD) access? If you want I can set my stock boot image insecure with ADBD and upload that as well.
I'm found a copy of a stock 5.1.1 ROM for the 4060a that is TWRP flashable. I'm uploading it to Mega File now. I'll post the link when completed. I fixed the installer on this ROM and rewrote the Edify script.
4060a Stock ROM
TWRP Flashable Zip
Android 5.1.1 Lollipop
Build No. M5RUAR4
Root: SuperSU v2.82-SR5
Link: https://mega.nz/#!VEVUwaxB!sCsdYXPE-_ytsqKnXRJHhFLVLnn3jxCDY8bG7FP89nM
@KV2_URSS, if you have TWRP installed, this may unbrick your device.
Update: I dissected that ROM and discovered some syntax errors in the Edify script. I've rewritten the installer and fixed some bugs with the updater-script. I also just tested the ROM on my own 4060a and confirmed that it does work. I'll post the updated link to replace the other link in a few minutes.
Viva La Android said:
Update: I dissected that ROM and discovered some syntax errors in the Edify script. I've rewritten the installer and fixed some bugs with the updater-script. I also just tested the ROM on my own 4060a and confirmed that it does work. I'll post the updated link to replace the other link in a few minutes.
Click to expand...
Click to collapse
Thanks, this is a posibility for unbrick my phone, you now fixed the rom link? :good:
KV2_URSS said:
Thanks, this is a posibility for unbrick my phone, you now fixed the rom link? :good:
Click to expand...
Click to collapse
flashed but still bootlooping, i think my phone its broken Anyway: thanks for help!
KV2_URSS said:
flashed but still bootlooping, i think my phone its broken Anyway: thanks for help!
Click to expand...
Click to collapse
Did you download from the updated link? The ROM from the old link was bootlooping my 4060a also. I fixed the installer script and when I tried it again it worked. On the new one, I added my username to the installer script and removed the original dev's name. Is this the one you tried? Also, did you do a full wipe before installing? (/system, /cache, Dalvik, format /data)
---------- Post added at 01:22 PM ---------- Previous post was at 01:17 PM ----------
@KtownJeff I'll try to have the 4060o stock 6.0.1 ROM posted later today, and I'll post the dump files from my device. Thank you again for the official firmware.
Viva La Android said:
Did you download from the updated link? The ROM from the old link was bootlooping my 4060a also. I fixed the installer script and when I tried it again it worked. On the new one, I added my username to the installer script and removed the original dev's name. Is this the one you tried? Also, did you do a full wipe before installing? (/system, /cache, Dalvik, format /data)
Click to expand...
Click to collapse
i flashed the updated rom with your name in updater script and still bootlooping
KV2_URSS said:
i flashed the updated rom with your name in updater script and still bootlooping
Click to expand...
Click to collapse
Ok. My guess is your boot chain may be corrupt. I'll write you an installer to try and fix it. I'm fixing some things on the 4060o ROM, so I'll write you an installer for your 4060a when I get ready to upload the other ROM. In the installer, I'll place some of the bootloader partitions from the firmware package to be installed on your device.
Viva La Android said:
Did you download from the updated link? The ROM from the old link was bootlooping my 4060a also. I fixed the installer script and when I tried it again it worked. On the new one, I added my username to the installer script and removed the original dev's name. Is this the one you tried? Also, did you do a full wipe before installing? (/system, /cache, Dalvik, format /data)
---------- Post added at 01:22 PM ---------- Previous post was at 01:17 PM ----------
@KtownJeff I'll try to have the 4060o stock 6.0.1 ROM posted later today, and I'll post the dump files from my device. Thank you again for the official firmware.
Click to expand...
Click to collapse
@Viva La Android....no problem for the files my friend...please post the ROM and dump files...i went as far as test point into EDL mode and I cant get anything to download for some reason...Im gonna play around with QSET and see if there is a way to just wipe and manual install partitions that way
KtownJeff said:
@Viva La Android....no problem for the files my friend...please post the ROM and dump files...i went as far as test point into EDL mode and I cant get anything to download for some reason...Im gonna play around with QSET and see if there is a way to just wipe and manual install partitions that way
Click to expand...
Click to collapse
Ok friend. I'll expedite and get that done now. To clarify, you want a full partition dump of my 4060o, correct?
The partition dump files and MM stock ROM for 4060o are uploading now. @KtownJeff, I don't have the best signal tonight in terms of fast upload/download data speed, but the ROM and files you need are uploading and links will be posted here ASAP. For informational purposes, my partition dump is taken from a stock Android 6.0.1 Alcatel STREAK, Build No. A45UC50, Build Date: June 24, 2016; Security Patch Level June 1, 2016, Kernel Version: 3.10.49, and Baseband Version: MSM8909.12110.15W46. My ROM has been built from this firmware version as well.
Update: Link will be posted within the hour.
The phone allows you to enable bootloader unlocking in the developer options. So, I was wondering what command is needed to enable it?
I have no clue, I've been searching high and low, trying to figure out a way to root this device and I've hit a wall at every turn. Any help would be appreciated
Zte firmware needed
If someone can find the zte firmware/stock rom i can install magisk into it untill someone can build a twrp recovery for it
---------- Post added at 01:50 AM ---------- Previous post was at 01:49 AM ----------
If someone finds the firmware i can root it untill someone can build twrp for it
uni-android unlock tool will unlock bootloader so you can root the n9137 and many other devices... it cost 50 bucks and its good for a year of unlimited unlocking. GOOD LUCK!
Any progress on this front? I have a ZTE Tempo X N9137 HW1.0 from Assurance Wireless (Free Gov't phone).
I Just want to root this phone, so I can run rooted apps. I am not interested in installing other ROMs (I am not sure, but my feeling is that I have to leave the original ROM alone in order for this phone to continue to work w Assurance Wireless under the gov't lifeline free cell program - someone correct me if I am wrong and it is confirmed that I can actually ROM better ROMs into this ZTE and continue to work normally with Assurance Wireless.)
Do I need to install TWRP or CWM in order to root the ZTE, or can I use ADB and Fastboot to unlock the bootloader and install Magisk or SuperSU to allow root?
I googled around, but I can't find TWRP or CWM for the ZTE N9137.
Any help or link to guides specifically for the ZTE Tempo X N9137 is greatly welcomed and needed,
Thanks
What is needed?
I have this phone as well. You still need the firmware? DO you need the version or the actual firmware file?
SP6RK said:
If someone can find the zte firmware/stock rom i can install magisk into it untill someone can build a twrp recovery for it
---------- Post added at 01:50 AM ---------- Previous post was at 01:49 AM ----------
If someone finds the firmware i can root it untill someone can build twrp for it
Click to expand...
Click to collapse
Root ZTE Tempo X N9137 Assurance Phone
sketchscarz said:
I have this phone as well. You still need the firmware? DO you need the version or the actual firmware file?
Click to expand...
Click to collapse
Any luck rooting this phone using KingRoot?
Has the Bootloader been unlocked yet?
If I ever get this phone rooted,. will I be able to replace the ROM?what will happen to the Assurance portion of it? WIll it still work as a free gov't phone, or does it need to have the Assurance software to work as the free government phone?
I need to root this phone so I can run rooted app to expand the very limited built in storage space. I cannot install any new app because there is no more storage space. The solution is to allow App2SD or other app that install apps into the SD card, but this requires root access.'
any help greatly appreciated
Hey guys - I good news to report. I successfully rooted my ZTE X N9137. Running Android 7.1.1 build version N9137V1.0.0B08 which is the most current. My phone came with a Sprint SIM and the phone service is Q-Link I have screenshots of the installed root apps I used and also all the bloatware removed gone from the Apps Drawer. I rooted using KingRoot but not via the apk. I am working on a guide and also going to recreate to verify the steps. I used the combo of scripts that I found from site that I linked below. The requires an account to download but it's free. A couple of things I discovered
Start with the phone in EDL Mode:
The phone needs to be in EDL mode (blank screen but is still powered on).
from adb run this command
adb reboot edl
Or run the edl.bat from the /root/ folder
Root / Unlock
Script used was : Unlock ZTE-N9137_1_DEVICE.bat
The script requires many reboots and it was after UNLOCKING PHONE STEP 3 is when Kingroot was installed.
This is when I debloated . During this step my wifi was inaccessible (firmware mismatch I suspect)
The script then performed another reboot and I lost root and recovery is non accessible
Mirror of the script package:
https://www.filehosting.org/file/de...ucion de Desbloqueo 100% TESTED Halabtech.rar
Original script package:
https://support.halabtech.com/index.php?a=downloads&b=folder&id=33472
Stock Firmware Site:
https://combinefile.com/index.php?a=downloads&b=folder&id=15471
I was able to download one from their site before having to pay money. YMMV
https://drive.google.com/drive/folders/1GhQof56lwMZvAsk25J-ONo-DEesXliQ3
This guy has an older version: N9137V1.0.0B04
How to flash ZTE roms:
https://www.leakite.com/how-to-flash-zte-stock-rom-firmware-via/
Service Mode - Enter this dial:
*983*0#
Here are screenshots of my ZTE N9137 without all the bloat! "Kingroot - Remove Bloatware" removed
40 pre-installed apps which most were installed as a service which requires to root to remove.
Everything runs some much smoother now.
Based on the overwhelming response with my previous posts, I am continuing ahead. I was again successful at getting root. Attached a couple of pics.
Since I have been unable to unlock the bootloader, the process is only temp
Unlock hotspot, add to APN internet.. APN type default,dun,mms,hipri. Use by4 setting editor to unlock hotspot
Link to mirror of the script is broken. Anyone have a copy? I have found a copy of the script. I can confirm it works. If anyone needs it let me know
I have ordered one of these phones, in the meantime here is the N9137 Firehose and support files (rawprogram0.xml and patch0.xml)
https://www.androidfilehost.com/?fid=1395089523397897020
QFIL flashable V1.0.0B23 Sprint/Boost Firmware
https://www.androidfilehost.com/?fid=1395089523397897018
A guide to flash the firmware (Replace the firmware in the guide with the one above) and individual images.
https://forum.xda-developers.com/maven-3/how-to/how-to-return-to-stock-flash-images-qpst-t3901510
Nice to see things advancing. Any progress with TWRP yet? Looks like you've been working on it based on your GitHub deadman...
Help Rooting ZTE N9137
Hi! I'm kind of a newb at the rooting process so I was hoping someone had a guide on how to root this phone. My version of this phone is from Qlink Wireless with a Sprint SIM installed. Thank you in advance!
Flashing always faults out with a read error once it gets to carrier.img. Any ideas?
CivicObligation said:
Flashing always faults out with a read error once it gets to carrier.img. Any ideas?
Click to expand...
Click to collapse
That happens when the img is 0 bytes, remove any of the imgs that are 0bytes from the rawprogram0.xml. Then restart your device to edl again and restart your flashing program and try again.
deadman96385 said:
That happens when the img is 0 bytes, remove any of the imgs that are 0bytes from the rawprogram0.xml. Then restart your device to edl again and restart your flashing program and try again.
Click to expand...
Click to collapse
Thank you! Seems so obvious after you explained. Any suggestions or advice on FH loader errors? The log says my device is not on the current port once it tries to actually write to the device.
deadman96385 said:
I have ordered one of these phones, in the meantime here is the N9137 Firehose and support files (rawprogram0.xml and patch0.xml)
https://www.androidfilehost.com/?fid=1395089523397897020
QFIL flashable V1.0.0B23 Sprint/Boost Firmware
https://www.androidfilehost.com/?fid=1395089523397897018
A guide to flash the firmware (Replace the firmware in the guide with the one above) and individual images.
https://forum.xda-developers.com/maven-3/how-to/how-to-return-to-stock-flash-images-qpst-t3901510
Click to expand...
Click to collapse
Can you confirm if this technique will network-unlock an N9137 linked to Assurance Wireless? Or is this not possible yet?
Thank you
---------- Post added at 11:46 PM ---------- Previous post was at 11:10 PM ----------
n2locarz said:
Root / Unlock
Script used was : Unlock ZTE-N9137_1_DEVICE.bat
The script requires many reboots and it was after UNLOCKING PHONE STEP 3 is when Kingroot was installed.
This is when I debloated . During this step my wifi was inaccessible (firmware mismatch I suspect)
The script then performed another reboot and I lost root and recovery is non accessible
Mirror of the script package:
filehosting.org link
Original script package:
hablatech.com link
Click to expand...
Click to collapse
Both of the above links don't work. The filehosting.org link is broken or dead and the hablatech.com download is behind a paywall, even if you create a free account on their site.
Does anyone have a link to this script? Also if successful, will this approach network-unlock my phone?
PS. I'm not allowed to post links with a new account so I had to edit them out of the above quote. However you can find them in the original post.
Hello again,
I've proceeded to try Deadman's strategy to install the stock rom he provided. I've implemented the fix to remove references to empty '.img' files in the rawprogram0.xml. The helper files and the rom have been unzipped to the same folder, such that Deadman's rawprogram0.xml and patch0.xml have overwritten those provided in the firmware image folder, which I believe is the correct method.
When I reboot my phone into EDL mode using adb, the QFIL application recognizes the phone as "Qualcomm HS-USB QDLoader 9008 (COM6)" and I can begin the flash.
However, the flashing hangs or stops when it reaches the following stage:
Code:
2019-04-15 12:42:34.015 12:42:33: INFO: {percent files transferred 2.78%}
2019-04-15 12:42:34.016 12:42:33: INFO: In handleProgram('recovery.img')
2019-04-15 12:42:34.016 12:42:33: INFO: Looking for file 'recovery.img'
2019-04-15 12:42:34.017 12:42:33: INFO: =======================================================
So it appears that there is an issue with the recovery.img file. However this file is both present in the same folder and non-empty. What could be the issue here?
Cheers.