guys, i have huge problem… somone tried to install TWRP recovery on my G8800 & now i cant do anything with him…. when i tried to install another recovery [via fastboot mode] i get the following error: FAILED (remote: partition 'recovery' not support flash)… what could i do? [i dont have any rom on the phone either...]
Related
Please Help me.....................
I have IM-A890K, with kitkat 4.4.2 installed, but i flash it with Rom A890VN_VEGA_OS_RC2.zip with TWRP recovery, Rom installed sucessfully but after that I could not boot in recovery, just fastboot comes everytime when i try to flash it again i get the message
downloading boot.img.......
ok
booting....................
failed <remote: dtb not found>
finished
fastboot also failed
FAILED <remote: it is not support in user builed.>
i also tried by PDL Download but failed
MOdel name is also changed like this
Model Name - IM-A890S (but my actual model is IM-A890K)
Firm Ver - S0222208
eMMC revision - 0.3 (0x3)
Please Help me how can I solve this problem?????
I was trying to build a CWM recovery for Celkon Q 500, which is a Broadcom chip based mobile(BCM 23550) by following some guides from internet. After finishing it, I tried to test it without flashing it to recovery(because of fear). I used the command " fastboot boot recovery_cwm6032.img ". It produces a result like this ;;--"downloading 'boot.img'...
Okay [0.312s]
booting...
FAILED<remote : boot command not supported>
finished. total time : 0.328s
What does this mean? Does it mean that my mobile or the OS of my mobile(android 4.4.2) does not support the fastboot command 'fastboot boot xxx.img' or the is something wrong inside the recovery_cwm6032.img?
I had tried to get a CWM recovery at 'builder.clockworkmod.com', but as reported by many I also did not get any result.(a new web page opens after clicking 'continue to build server' that shows "HTTP ERROR 404
Problem accessing /job/recovery/. Reason:
Not Found ".
Please help.
Hi guys,
after flashing original recovery from Rashr, I have a hard bricked Meizu M1 Note. I can only boot into fastboot or VCOM (for SP Tool), no recovery, not normal boot.
Hope you can help me,
Thank you
Same story, even worse! I wanted to downgrade from LP to KK. I followed step by step guide posted in other forum. Everything works, but after 2 or 3 days, phone started to act very strange. Volume keys did not react properly (cant switch in recovery and made an screen shot for example), phone started to loose network coverage . I tried to reset it, but unfortunately no fastboot and recovery modes were present. The only way to switch in recovery was rashr tool. I decided to reflash recovery again and everything went wrong! The result was permanent restart, no recovery and fastboot modes. Maybe this method should be avoided. I know that everything I made is at my own risk, dont blame me.
Need advice to unbrick it. I was thinking to disassemble it and disconnect battery and try to resurrect it with adb?! The bad thing is that it wont turn into fastboot...pfuu.
Have some progress - phone can go into fastboot mode, but when I try to flash stock recovery, it reports error:
C:\adb>fastboot flash recovery recovery.img
sending 'recovery' (16384 KB)
OKAY [ 0.616s]
writing 'recovery'...
FAILED (remote:
Security deny - Err:0x2017 because it is locked
)
finished. total time: 0.665s
Click to expand...
Click to collapse
Will appreciate any help. Thanks!
Any help?
Help
I have the same problem. Could anyone help us?
any help?
I have more or less the same problem but my cellular conects disconects preloader usb driver and don't see nothing in the screen, not logo, not recovery, not fastboot mode, any help?
Hi,
I'm newb in this forum and i'm looking for your advice and help,
my situation is as titled in the thread...my phone stuck on huawei logo...the situation starts when i'd tried to flash TWRP recovery..but it seems that was a wrong one...after then i erased system (stupid i was :crying: ) trying a factory reset (i'd downloaded the original stock)....this is when things gets worst ...now i can't get into recovery mode and the phone stuck on the logo...one last detail when the phone is turned on and usb connected to the PC the Hisuite seems identifying the phone but couldn't connect...
any help would be very appreciated
thank you all for your time,
BoFar said:
Hi,
I'm newb in this forum and i'm looking for your advice and help,
my situation is as titled in the thread...my phone stuck on huawei logo...the situation starts when i'd tried to flash TWRP recovery..but it seems that was a wrong one...after then i erased system (stupid i was :crying: ) trying a factory reset (i'd downloaded the original stock)....this is when things gets worst ...now i can't get into recovery mode and the phone stuck on the logo...one last detail when the phone is turned on and usb connected to the PC the Hisuite seems identifying the phone but couldn't connect...
any help would be very appreciated
thank you all for your time,
Click to expand...
Click to collapse
FYI,
now i can get into bootloader but without a recovery...
with the already downloaded stock rom i'd extracted all IMG files from the UPDATE.APP.
the step where i'm stucking is that flashing system with fastboot gives this :
target reported max download size of 266338304 bytes
erasing 'system'...
OKAY [ 1.094s]
sending sparse 'system' (259466 KB)...
OKAY [ 17.422s]
writing 'system'...
FAILED (remote: size too large)
finished. total time: 18.547s
the system.img is 2.39 Go.
same things and messages happens with recovery & boot files [ FAILED (remote: size too large) ]
I thank you advising how to resolve this
[SOLVED]
Here's steps that I made (after a long search with Dr. GOOGLE ):
1- Download & install the Android Studio and its SDK tools (that include fastboot and adb latest version). when having the famous message of FAILED (....TOO LARGE) use the -S switch and be patient with SYSTEM.IMG since file size is big (first tries gave me the error message but after many try it works),
2- Download the official stock ROM from Huawei webpage,
3- Download Huawei Update extractor,
4- Extract BOOT.IMG & RECOVERY.IMG & SYSTEM.IMG from the UPDATE.APP extracted file,
5- flash sequentially : RECOVERY then BOOT then SYSTEM (Remember the reboot after each flash),
That's all...Folks
Hi all,
my Tab Z2 (LTE) freezed during operation so I turned it off (Power + Vol Up) and it vibrated 3 times
When turning it on I only see the Sony Logo but that´s it
I´m not able to access TWRP (TWRP is flashed and AICP 14) as it won´t boot that far that the LED starts to blink.
So I tried to flash TWRP via fastboot again - no success
I tried to flash boot.img via fastboot again - no success
Tried different files (to exclude a courrpted file) and tried a second laptop (to exclude driver issues)
The error which I get is the following:
FAILED (remote: flash write failure)
Anyone an idea what is causing this issue and how to solve it?
My assumption is that my Tab Z2 flash is broken!?
Regerads
UserX10