i've tried to flash many custom roms but i could only sucessfully boot up in roms that were modded versions of oos, other roms were stuck in bootanimation...
unlocked bootloader, rooted, bluspark recovery, did do the bootloader update process too... pls help!
I think it's something your flashing after ROM like SuperSU. Try flashing just the ROM and see if it boots. Side note there was a version of cm14.1 that wouldn't boot unless you flashed custom kernel like Arsenic.
Exodusche said:
I think it's something your flashing after ROM like SuperSU. Try flashing just the ROM and see if it boots. Side note there was a version of cm14.1 that wouldn't boot unless you flashed custom kernel like Arsenic.
Click to expand...
Click to collapse
ive tried aresenic kernel but im still stuck at boot animation... followed so many guides none of them working for me... only problem i can see is im seeing "failed to mount /persist (invalid argument)"
karasmunay said:
ive tried aresenic kernel but im still stuck at boot animation... followed so many guides none of them working for me... only problem i can see is im seeing "failed to mount /persist (invalid argument)"
Click to expand...
Click to collapse
Try updated TWRP like 3.0.2-0 or latest 3.0.3.
Related
So heres the deal, i tried to flash miui and it doesnt work at all, i am the dummy who didnt do a nandroid back up, and now im stuck, evo 3d hboot 1.5, twrp 2.0,try to push adb, but its says device not found. i can boot into hboot and twrp but i cant get a rom to load so.. someone please help
hmm
ok so i figured out if i load into twrp and then do adb commands they work. installed new rom but it gets stuck at boot animation, any help would be great.
baloocifer said:
ok so i figured out if i load into twrp and then do adb commands they work. installed new rom but it gets stuck at boot animation, any help would be great.
Click to expand...
Click to collapse
Did you wiped everything before the flash ?
Sent From My RED 3Dimension
yeah i did wipe everything, and i did get roms to load, but everyrom that i try now gets to the actual rom and keeps giving me errors, like htc.bg process force close
did you follow the instructions on how to flash miui to a phone with hboot 1.5 or did you just do it blindly thinking it will work? if you didnt follow the instructions your kernel did not flash
plus you can always mount your sd-card in recovery to transfer a different ROM, zip, ect.......
I have tried a lot of different things. i have loaded into twrp pushed roms then fastboot load recovery then installing with twrp and i seem to get the same results with every different rom.
baloocifer said:
I have tried a lot of different things. i have loaded into twrp pushed roms then fastboot load recovery then installing with twrp and i seem to get the same results with every different rom.
Click to expand...
Click to collapse
What radios are you on software? You should stick with a rom that is built off the latest updates. I have been waiting on a rom to drop built off the latest software update. Are you on the latest software? If you try running old roms built off 2.3.3 and your kernel and radios are the latest you will have issues no matter what you do.
i think i may have been trying flash it all wrong i dont really know what i did right this time but i got it loaded so making a nandroid back up right now thanks for all your guys help
ok so i had twrp and blisspop rom.. fine and working
wanted to flash s6 ported 4.4.4tw rom
twrp kept saying cannot mount /preload (no such device)
flashed the rom
stuck at bootlogo
/preload mount failed
/preload format failed
tried CWM and twrp 3
no luck
tried to flash 3 different roms still no luck
anyone help???
I9300t isnt the I9300. If you've flashed a rom for an I9300 expect issues.
Flash a stock rom via odin and do more research.
Sent from my HTC One M9 using Tapatalk
Hey,
So i wanted to try installing a custom ROM to my old Samsung Galaxy S3 (GT-9300 international).
I was able to root my phone with Kingo Root, and install TWRP.
When it was time to install ROM and Gapps
I was getting some 'Failed to mount '/preload' (invalid argument)' errors but all where successes to install.
After i had installed rom and gapps, the boot icon of the ROM did just keep on looping and nothing happened even after i waited 15 minutes.
Did try with Bliss and Temasek's UNOFFICIAL CyanogenMod 13 ROMs.
Is this phone a goner?
Moksu said:
Hey,
So i wanted to try installing a custom ROM to my old Samsung Galaxy S3 (GT-9300 international).
I was able to root my phone with Kingo Root, and install TWRP.
When it was time to install ROM and Gapps
I was getting some 'Failed to mount '/preload' (invalid argument)' errors but all where successes to install.
After i had installed rom and gapps, the boot icon of the ROM did just keep on looping and nothing happened even after i waited 15 minutes.
Did try with Bliss and Temasek's UNOFFICIAL CyanogenMod 13 ROMs.
Is this phone a goner?
Click to expand...
Click to collapse
Try to flash stock 4.3 Rom via ODIN
Hencel said:
Try to flash stock 4.3 Rom via ODIN
Click to expand...
Click to collapse
Hey,
Yeh that seemed to work for me!
Really hard to find download page for original Roms. This forums is a mess.
Moksu said:
Hey,
Yeh that seemed to work for me!
Really hard to find download page for original Roms. This forums is a mess.
Click to expand...
Click to collapse
Sammobile would be ur go to site for stock firmware. Glad ur sorted though.
Root with cfautoroot and use an official cwmr.
Beamed in by telepathy.
Hey,
I got a problem with my S2g. I'm currently on Android 4.1.2, with cwm 6 and blazing v-5 kernel. Both were flashed per odin and work fine. However I can't flash a custom rom. Every time I try it I'll get a Status 7 error. I've already tried 4 different ROMs and I'm really annoyed by now. I also tried to factory reset the phone before I flash the ROM, but it didn't make any difference. I also tried deleting the assert command in the updater-script file but somehow my changes in the file won't be saved.
If anyone could help me I would be really thankful!
http://forum.xda-developers.com/galaxy-s2/help/to-mod-s2-t3189884
I've just tried this, didn't work also. I even had to flash the recovery and the kernel again after trying to flash the file in the link, because the phone wouldn't boot normal or in recovery mode.
mcb25 said:
Hey,
I got a problem with my S2g. I'm currently on Android 4.1.2, with cwm 6 and blazing v-5 kernel. Both were flashed per odin and work fine. However I can't flash a custom rom. Every time I try it I'll get a Status 7 error. I've already tried 4 different ROMs and I'm really annoyed by now. I also tried to factory reset the phone before I flash the ROM, but it didn't make any difference. I also tried deleting the assert command in the updater-script file but somehow my changes in the file won't be saved.
If anyone could help me I would be really thankful!
Click to expand...
Click to collapse
Try using philz recovery on your phone. It should flash most ROMs fine.
gsstudios
gsstudios said:
Try using philz recovery on your phone. It should flash most ROMs fine.
Click to expand...
Click to collapse
I just did, I still get the Status 7 error. I tried to flash the cm 12.1 and the cm 13.0 nightly rom. I also tried deleting the assert command in the updater-script file but it still won't work. There was no Status 7 error but it still said "Installation aborted".
Does anyone else got an idea how to fix this?
http://forum.xda-developers.com/galaxy-s2/development/kernel-blazing-kernel-v16-t2275275
I used this Kernel, I just noticed, that it's only compatible with Android 4.1, 4.2 or 4.3.
I then tried to install the DorimanX Kernel for LP and MM (http://forum.xda-developers.com/galaxy-s2/development-derivatives/kernel-dorimanx-lp-5-x-x-t3145879) but my phone stucks at the boot screen.
mcb25 said:
http://forum.xda-developers.com/galaxy-s2/development/kernel-blazing-kernel-v16-t2275275
I used this Kernel, I just noticed, that it's only compatible with Android 4.1, 4.2 or 4.3.
I then tried to install the DorimanX Kernel for LP and MM (http://forum.xda-developers.com/galaxy-s2/development-derivatives/kernel-dorimanx-lp-5-x-x-t3145879) but my phone stucks at the boot screen.
Click to expand...
Click to collapse
Apologies, I only just noticed you have a i9100g, not a i9100. You can't just flash i9100 kernels as they simply won't work!
You can follow the guide in the CM13 OP here:
http://forum.xda-developers.com/galaxy-s2/development/rom-cyanogenmod-13-0-t3381511
gsstudios
1) cm-14.0-20160914-UNOFFICIAL-onyx.zip, 2) cm-14.0-20160917-UNOFFICIAL-onyx.zip
These are the 2 cm14 zips that I tried to flash multiple times (using twrp 3.0.2.0). The flash was successful everytime. But no matter how hard I try, it just won't boot. Just stays stuck on the OnePlus logo for eternity. I just recovered my phone from a soft-brick (no OS, no Recovery) and still continuously trying since days to use cm14.
Please, if anyone can then PLEASE HELP!
amritanshu.sikdar said:
1) cm-14.0-20160914-UNOFFICIAL-onyx.zip, 2) cm-14.0-20160917-UNOFFICIAL-onyx.zip
These are the 2 cm14 zips that I tried to flash multiple times (using twrp 3.0.2.0). The flash was successful everytime. But no matter how hard I try, it just won't boot. Just stays stuck on the OnePlus logo for eternity. I just recovered my phone from a soft-brick (no OS, no Recovery) and still continuously trying since days to use cm14.
Please, if anyone can then PLEASE HELP!
Click to expand...
Click to collapse
Check the bootloader compatibilty of these roms, if they r for the mm bootloader it ll not boot untill u upgrade ur bootloader, check the threads from wer u hv downloaded this...
amritanshu.sikdar said:
1) cm-14.0-20160914-UNOFFICIAL-onyx.zip, 2) cm-14.0-20160917-UNOFFICIAL-onyx.zip
These are the 2 cm14 zips that I tried to flash multiple times (using twrp 3.0.2.0). The flash was successful everytime. But no matter how hard I try, it just won't boot. Just stays stuck on the OnePlus logo for eternity. I just recovered my phone from a soft-brick (no OS, no Recovery) and still continuously trying since days to use cm14.
Please, if anyone can then PLEASE HELP!
Click to expand...
Click to collapse
Most Roms now require you too flash OOS 3.1.3 first. Like mentioned above bootloader issue.
Exodusche said:
Most Roms now require you too flash OOS 3.1.3 first. Like mentioned above bootloader issue.
Click to expand...
Click to collapse
I already flash the OOS 3, but still this problem continues.
File name: OnePlusXOxygen_14_OTA_015_all_201608181615_e03d2112e8ad4bff
Is there any other way how I can manually upgrade my bootloader? That would really help.
amritanshu.sikdar said:
I already flash the OOS 3, but still this problem continues.
File name: OnePlusXOxygen_14_OTA_015_all_201608181615_e03d2112e8ad4bff
Is there any other way how I can manually upgrade my bootloader? That would really help.
Click to expand...
Click to collapse
check out this thread http://forum.xda-developers.com/oneplus-x/general/guide-update-bootloader-firmware-to-t3478917
amritanshu.sikdar said:
I already flash the OOS 3, but still this problem continues.
File name: OnePlusXOxygen_14_OTA_015_all_201608181615_e03d2112e8ad4bff
Is there any other way how I can manually upgrade my bootloader? That would really help.
Click to expand...
Click to collapse
I use Oxygen_14_OTA_18_all but there's a couple files posted on the bootloader upgrade threads that allow you not too flash the whole firmware just the partions you need to upgrade.
i am having same issue i was on oxygenos 3.1.3 firmware when i started to flash nogut roms every nogut rom works except cm. i flashed official cynogenmod 14.1 thinking that problem must have been solved but it wont boot it just shows oneplus logo. i have waited for 30 minutes but nothing happened if something worked out for you please tell me.
Well I've looked around XDA for soultion and this is it.
CM 14 has some Kernel problems, so only what you have to do is just install new kernel as Arsenic or Black Reactor kernel
I was running the new bootloader on cm13 nightlies and couldn't get it to boot either.
Even after a full wipe and reflash with v7 gapps
Gave up in the end and went back to the last cm13 Nightly
flash arsenic kernel after flashing rom and gapps it will boot. Read the posts in ashwin's official cm 14.1 thread.
Flash Black Reactor (recommended) or Arsenic Kernel.
The zip files that you have for CM are the unofficial ones. So I guess they're from Sarthak Narang. Or at least one of them. Those ROMs require the older bootloader to function. So if you have the newer bootloader, it won't work.