The Phone screen is not turning off (F3212) - Sony Xperia XA Ultra Questions & Answers

So i followed the thread on how to root xperia xa ultra duel in here https://forum.xda-developers.com/xa-ultra/how-to/how-to-root-xperia-xa-ultra-dual-t3439173
but after rooting and doing all steps after booting the device and checking it's functionality I noticed that the front camera is not working and it crashes everytime
so i wanted to flash a new firmware but my flashtool kept saying "no flash script found" and aborted the flashing >>so i waited for a new boot and the creator "rrvuhpg"
made a new boot for the test in here https://forum.xda-developers.com/xa...12-f3216-stock-kernels-built-sources-t3527762
flashed it using adb and rooted the device one more time and booted the phone again now there are 2 problems while the camera problem is fixed
the screen won't turn off completely and after clicking the power button to turn it off it turns into a very dark screen "not noticeable in high light but in low light u can clearly see it's on"
and when i try to click the power button to turn it on again it does this weird TV like static and shows the normal screen afterwards
and the brightness level meter is always at the maximum and can't be changed so my phone battery dies very quick now
I need help because I can't flash anew firmware and i have to stick with "Battery Killer" setup i have right now so i need help with both flashtool and a fix for the boot or just a way to recover my stock firmware

i checked one more time and i found out that the twrp can't wipe cache partition and if i factory reset the phone it doesn't work and all data remain

Related

[Q] Crazy phone behaviour after flashing..

Hi guys, I've installed many CFW without problem, until I installed the latest PACMan build. I didn't like it so I reflashed the Hasa v6, that i've been using for a while, and the phone just got kind of "crazy". I tried to wipe/format/wipe delvik, flash another rom via recovery, flash the stock FW with flashtool, still the problem continue.. I'll try t make a short list of the problems:
- Lockscreen usually hangs the phone, screen goes all black and playing with the power, after a while, it goes back sometimes
- Some force-closes (mainly the system process)
- Sometimes I can't boot to CWM, the "back" and "option" touch-buttons keep lit, and that's it, sometimes I can
- Also the battery status doesn't seem to be working properly, I charge it and it never pass the 30% mark, or get stuck on a number beforr it
How can I do a "brute-force" wipe, or something like that to restore my phone to it's normal state? These issues are driving me mad, and I can't see a solution..
Thank you very much!
The device is a Sk17i Mini Pro
Try flashing a kernel like LuPuS v3 or MESA Hybrid v3.7 via Fastboot and then flash the latest ROM that was working flawlessly.
Thanks, I tried with mesa and Lupus and after that, the same issues seem to occur..
Adding problems:
- I started having the "build prop" error, always when I flash CM-based roms, and I never had this issue before these problems (I do the workaround to install them by editing them with notepad++ and removing first lines..)
- The phone, once in a while, stay with the back and menu buttons lit for ages..
- The phone doens't turn off completely (menu and back and the screen stay lit, the screen is black, but it's ON), the only way to truly turn off is removing the battery..
- When I choose "power off" from the bootloader, the same issue occurs, the screen stay lit in black and phone doesn't turn off..
Please help.. I just don't know what is happening and it is so frustrating.

Touch Screen works but no display or colors just black screen

I have a xperia u After replacing the housing touch doesn't seem to work.... Device turns on device leds blinks but screen is just black lighted without colors.... after booting up (after 2 vibrates thats how XU boots) when i press camera button it opens the camera (flash light turns on) when i touch where camera icon is it just captures the picture(flashes and i can hear the capture sound)
Simply the problem is touch works. its responsive but no colors it just lights up thats it. Digitizer works to (menu, home, back buttons) cuz after booting up when i touch it it vibrates.
(When i keep removing the battery and restarting a single time sony logo came and went)
Please someone help me to solve this issue.....
my xt890 lcd screen and digitizer were broken so i changed them and the phone was working fine for a week, i then wanted to update to kitkat through oem update; everytime i tried it would give me error . i then read that since i unlocked bootloader and rooted my phone and installed cwm recovery i couldnt do an oem update and i had to do a factory reset in order to update through oem, so i did just that ; after the phone finished factory reset and booted i proceeded with oem update while the phone was charging, everything was going fine the file was downloading, i went to the bathroom and came back the display was black, but touch screen was working fine...through more searching i read that this could be from the update, and i should do another reset... since i couldnt see anything even recovery menu. i downloaded moborobo so i can see my screen on pc and proceeded to factory reset ... now i cant even see through moborobo and im stuck. Please help.

Stuck "IN LOGO SCREEN"

Hello guys,
Today suddenly the phone was turn off without any warring.
The next step I did is to turn it on, the phone is boot and working fine, and then turn off without any warring.
In the third time the phone going to the logo screen and turn off and in the fourth time again going to logo screen and turn off and, and etc.
After all this phenomenons I deiced to flash to backup I got, insert to recovery mode and I do "restore" action - the phone says "missing m5 files". Then I find your guide to flash a stock rom with Odin and it to be ended successfully. Now the phone turn on into the setting page of Samsung's stock and the screen stuck (any touch on the screen doesn't do anything). I turn off the phone and try to turn it on and again the phone is going to Samsung logo screen and turn off.
It is important to note that the phone insert to "download" and "recovery" mode.
I think that the phone infected with virus.
guys need yours help! :good::good:
Best regards,
Moshe
Try again with odin but with a diferent stock rom. Make sure you have stock according to your phone version. I9100, i9100g etc.
Hope this soslves your problem
Moshe125 said:
Hello guys,
Today suddenly the phone was turn off without any warring.
The next step I did is to turn it on, the phone is boot and working fine, and then turn off without any warring.
In the third time the phone going to the logo screen and turn off and in the fourth time again going to logo screen and turn off and, and etc.
After all this phenomenons I deiced to flash to backup I got, insert to recovery mode and I do "restore" action - the phone says "missing m5 files". Then I find your guide to flash a stock rom with Odin and it to be ended successfully. Now the phone turn on into the setting page of Samsung's stock and the screen stuck (any touch on the screen doesn't do anything). I turn off the phone and try to turn it on and again the phone is going to Samsung logo screen and turn off.
It is important to note that the phone insert to "download" and "recovery" mode.
I think that the phone infected with virus.
guys need yours help! :good::good:
Best regards,
Moshe
Click to expand...
Click to collapse
Did you factory reset and wipe partition and dalvik cache?
gsstudios said:
Did you factory reset and wipe partition and dalvik cache?
Click to expand...
Click to collapse
+1
try to do it after and before flashing
and please verify you phone model if it i9100 or i9100g
1. I try to flash with anther stock rom - not helped.
2. I did all the wipes and factory reset.
3. My model is i9100.
ty again guys
EDIT: The problem was the battery...

Screen failure after flash update of ROM

I made a nandroid backup and the reflashed my ROM (Jasmine 9.0 and 9.1) and the debloat script on TWRP 2.8.7.0. Wiped cache. Reboot system.
Now the screen doesn't come on. LG logo doesn't appear. Don't know what I'm doing now.
The ROM boots which I can tell by the LED cycle and it optimized apps, made the phone plugged in sound on boot. If I double tap the digitizer, the LED lights up to pretend the screen came on. Seems like the display is dead but the phone is working and booting. Is this even possible by software? I want to get into recovery and flash a KDZ, but Verizon made that difficult and I can't see at all what I'm doing.
Fixed by powering off and holding up while connecting usb to enter download mode and using a kdz for 10b.
Worst flashing error I've ever encountered, no idea how it went so badly.

Completely bricked Xperia C5 Ultra (E5533)

Hello All,
I've got big issue with E5533 device. As I was told device had just turned off suddenly some time ago. I've read something about "sudden death" of Xperia smartphones - after that I've tried to use the 'yellow' reset switch I've found nearby SIM card slot - this does not really help at all. I've tried to power up the phone, it was connected to charger over 12h - after that the icon of low battery still show up, the icon of battery and 'flash' as well. After double-click of power button device showed 'Sony' and 'xperia' logo and after that the black screen appears.
What's more interesting after connecting device to PC - it's available you can see the folders etc, etc.
After that I used Sony Pc Companion and used 'repair' option - same situation - logo and black screen...
I used Flashtool, downloaded the latest 5.1 version of firmware, at first received some issues with BOOT to load - searched on forum and set minimum 128 value of speed.
Firmware flashed successfully - happy to see the results I've started the device using power button - and guess what - logo and black screen again...
I've noticed that phone is starting up after few secs in low light - but seems to reboot after the phase of updating android apps it goes from 0 to 190 and then the screen goes black again... then shows some error I'm unable to read.
Have you got any E5533 stock firmware maybe lower that 5.1 for me to try flash it?
OR have you got an idea what can I do next with this device?
I used this firmware: E5533_29.1.B.0.87_1301-8214_R1A
Also tried this one E5533_29.1.B.0.87_R3A_Customized MAA.ftf - please find logs from last trial attached

Categories

Resources