Hello
I rk3188 mtcb radio one day I was wrong to flashrlo with firmware MTCD after only black screen restart and intra ni not even so Recovero but with the sd program firmware tool managed to flash a picture of fabrica4.4.4 doppo who wrote pull away sd card not only black screen riavia, deadlift and Fitting current polsante aacensione you turn: on-vehicle multimedia NVIGATION System and after Android logo and then the screen goes black
help mi please
thanks in advance
https://youtu.be/ZLKVHXeRClY
satjoker said:
Hello
I rk3188 mtcb radio one day I was wrong to flashrlo with firmware MTCD after only black screen restart and intra ni not even so Recovero but with the sd program firmware tool managed to flash a picture of fabrica4.4.4 doppo who wrote pull away sd card not only black screen riavia, deadlift and Fitting current polsante aacensione you turn: on-vehicle multimedia NVIGATION System and after Android logo and then the screen goes black
help mi please
thanks in advance
https://youtu.be/ZLKVHXeRClY
Click to expand...
Click to collapse
https://forum.xda-developers.com/showpost.php?p=67184851&postcount=50
Goose247 said:
https://forum.xda-developers.com/showpost.php?p=67184851&postcount=50
Click to expand...
Click to collapse
hi thanks for the reply
I run everything as vole there, managed to install firmawre fabrica pero says when I pull off the sd card do not riavia m remain only black screen.
but after I have to do?
x excuse the poor translation
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
it means no command? and how to solve this problem? thanks again
Related
Hi Guys and thanks for you attention.
I will try to make this as simple as possible. The phone of my friend was soft bricked
he was on 2.3 and tried to install a firmware that was not for that phone and he did not manage to install it
when he tried latter the motorola thinghy told him to Update the firmware and transform his 2.3 to a 4.04
HOWEVER his phone was not booting normally he would need to enter to bootloader and select NORMAL POWER UP
tried to find out the origin of the phone and was difficult to understand his firmware is somenthing like
672.180.41.xt910.02.en.DE
so i followed the guide
http://forum.xda-developers.com/showthread.php?t=1883640
and everything when fine until i tried to install the EU OTA
obviously this is not a EU phone....
is it german for the DE at the end?
some guy in another forum is mentioning that maybe this is the razr developer edition (????)
at any rate what i need to do is to install the original OTA but i have no idea which oe can be ..
funny enough if the phone is powered off would automaticly turn on and boot and stay in motorola logo.
any help would be very much appreciated
here you can guys look at some photos that can help
http://imgur.com/a/EQjrq
Hi guys after looking i found a nice collection of firmwares
http://sbf.droid-developers.org/umts_spyder/list.php
my main problem was that i did not know the firmware but now following this image
i assume is the 6.7.2.-180_SPU-19-TA-11.6
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
now after download i try to flash that and i got a error
SIGNATURE verificacion failed
I don't understand what OTA would be "allowed " to install
any help is very much apreciated
Thanks
After some doubts (on rds lite the phone details apear as N/A)
i used the ota 672.180.41.xt910.02.en.DE
And phone is working perfectly
Thanks
Hi all,
i ave one question.
I have this tablet:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
http://dl.xda-developers.com/attach...124/1/9/6/7/4/2/6/IMG_20130516_193023_747.jpg
http://dl.xda-developers.com/attach...169/1/9/6/7/4/2/5/IMG_20130516_193211_332.jpg
...and i search firmware for this.
All what i know is:
Processor Allwinner A10
Ram 1GB
Board WITS-A119
Display 9.7"
On box is
Cloud Series
9.7 Excellent Pad
Tablet is now dead - only android animated logo
Please help with this crap
no help ???
Just take any A10 firmware and flash it this one should work
http://forum.xda-developers.com/showthread.php?t=2104764
too can not find a firmware
really need, thanks
alibom said:
too can not find a firmware
really need, thanks
Click to expand...
Click to collapse
it must ust some programe like recovery firmware
i have this tablet and i need help for me i want firmware
if u can help
Nick14 said:
Just take any A10 firmware and flash it this one should work
http://forum.xda-developers.com/showthread.php?t=2104764
Click to expand...
Click to collapse
I change android for tablet imobily SG007 with stock room as they write but when iam done tablet is dead wont open again and cant change android because computer don't feel him as normal as Preloader and iam new here cant make a post so can u help plz :crying:
i've problem with touche screne and i found the need to downgrade it to fix the problem
what i driving me crazy is thet on download mode there is no (SERIAL or USB)
and i made a Y cable by my self and i made a gold card but when try to update i get "NOT ALLOW"
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
llcoolr said:
i've problem with touche screne and i found the need to downgrade it to fix the problem
what i driving me crazy is thet on download mode there is no (SERIAL or USB)
and i made a Y cable by my self and i made a gold card but when try to update i get "NOT ALLOW"
Click to expand...
Click to collapse
Firstly you have to downgrade your SPL, using f.e. this instructions
HTML:
http://forum.xda-developers.com/showthread.php?t=10023912
After unlocking your phone you can install your touch driver using this thread
HTML:
http://forum.xda-developers.com/showthread.php?t=2035030
It worked for me. I did it yesterday.
If you have any question, pls ask
ricaard said:
Firstly you have to downgrade your SPL, using f.e. this instructions
HTML:
http://forum.xda-developers.com/showthread.php?t=10023912
After unlocking your phone you can install your touch driver using this thread
HTML:
http://forum.xda-developers.com/showthread.php?t=2035030
It worked for me. I did it yesterday.
If you have any question, pls ask
Click to expand...
Click to collapse
thnx for replay but already fixed it but other tools
thank you again
Can you tell in brief how its fixed plz.
Me to same problem.
Hi guys
Sorry of this is in the wrong place, i need to retrieve files of my s3, basically the phone is on a loop at the samsung logo, i have tried all the resets found on the forum to no success.
Is it possible to purchase a working s3 then remove the hdd from mine and transplant it into the new one?
Any help appreciated guys
Anyone?
Zu11y said:
Hi guys
Sorry of this is in the wrong place, i need to retrieve files of my s3, basically the phone is on a loop at the samsung logo, i have tried all the resets found on the forum to no success.
Is it possible to purchase a working s3 then remove the hdd from mine and transplant it into the new one?
Any help appreciated guys
Click to expand...
Click to collapse
Well I wish this was the case for you but it's not... If it was a PC it would be. But Android phones use like solid state chips called EMMC which stands for "Embedded Multi-Media Card" This chip is partitioned with the Phone's OS, Bootloader, Recovery, Internal Storage ((Where Your Documents Go)). And etc. So if you take that chip out and solder it to the other phone it would still be stuck in boot loop. You may need to consider Jtaging your device's flash memory if possible. Look up how to Jtag a hardbricked S3 and see what you can find. If that don't work than I don't know what to do to be honest. If this was helpful at all please hit the thanks button below. Wish you the best.
Here's a picture of the EMMC Chip for your device.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hey all,
I hope you are doing well.
I switched off my brother's Galaxy Mega Plus (gt-19158p) and it won't turn on again !!
________________________________________________________________
I was about to update its rom, I started trying to flash "twrp-2.8.5.0-f2fs-crater" on it and I got an error message
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
then I went to download recovery app from this site https://twrp.me/devices/samsunggalaxymega58.html, I granted it a SuperUser permission and then installed blackbox, all of that when it was working on
I got the command to restart the phone from the app, but when I press yes nothing happens!! so I SWITCHED IT OFF !
It won't switch on, regardless of removing the battery or putting it in the charger ! no signs of life
ANY HELP pleeeeeeeeese !
Best solve i do in such cases : Factory Flash to stock firmware but then you should wait for a expert opinion here
kunalsaddar said:
Best solve i do in such cases : Factory Flash to stock firmware but then you should wait for a expert opinion here
Click to expand...
Click to collapse
how can I do a factory reset without it opening
it acts like it doesn't respond to power button, so no recovery mode!!
UP
Up
Please help
is this resolved?
AMDsn said:
Up
Please help
Click to expand...
Click to collapse
Try to put the phone into download mode and flash the stock firmware through odin
Sent from my GT-I9505 using XDA Free mobile app