I registered after trying to find my nougat (KDZ file) for about 3 hours. I could only find MM... Can someone help ? please......
What's the model and region of your G5?
For Model go to - Settings > About phone > Common > Hardware info
For Region go to -Settings > About phone > software info > Software version (Eg: V20a-AME-XX), here AME is for the Middle East
hello
my phone is LG-H850 and i updated to firmware V10dx-EUR-XX which is MM and not nougat......
Please i need a link with KDZ nougat...
Hello again, i finally manage to update to V20a-EUR-XX. Is that OK? Or there is a better update?
Yup, you're good to go!
Enjoy your Nougat
thanks mate! Waht about the version a-b-c? Is there any chance we can get Android 7.1.1 without root?
A is the first release of Nougat.
B is the second release with a few fixes, more fluidity and more battery optimization than A.
C is the third release with december security fix for HolyCow.
There's no way to install 7.1.x (CM/LOS/and maybe in the future AOSP) unless you unlock the bootloader and root the phone.
Trudi said:
A is the first release of Nougat.
B is the second release with a few fixes, more fluidity and more battery optimization than A.
C is the third release with december security fix for HolyCow.
There's no way to install 7.1.x (CM/LOS/and maybe in the future AOSP) unless you unlock the bootloader and root the phone.
Click to expand...
Click to collapse
Thanks now i get it! Can you give me a link for a C open version? In the link below i cant find a version C open update.
http://lg-firmwares.com/lg-h850-firmwares/
theunknownvictim said:
Thanks now i get it! Can you give me a link for a C open version? In the link below i cant find a version C open update.
http://lg-firmwares.com/lg-h850-firmwares/
Click to expand...
Click to collapse
http://lg-firmwares.com/download-file/?fileId=4916
It's not open, but it works with any operator, though, that one is not customized by the operator.
Trudi said:
http://lg-firmwares.com/download-file/?fileId=4916
It's not open, but it works with any operator, though, that one is not customized by the operator.
Click to expand...
Click to collapse
OK i will try it then! Do you have the same version in your G5?
Related
Hello every one,
I bought huawei mediapad x1 7.0 from egypt
with build number 7D-501uV100R001C358B002
Baseband 21.526.00.00.000
while surfing the internet yesterday i found a site with developer called [email protected]
http://www.needrom.com/
which i found an update to this mobile 7D-501u V100R001C233B017
http://www.needrom.com/mobile/x1-7d-501u-3/
the question is would be there any problem to flash this update to my phone ???? because they say ( chineses channel )
second if there any problem could i downgrade to another version or the original firmware and how ????????????
with regards
mm3omar said:
Hello every one,
I bought huawei mediapad x1 7.0 from egypt
with build number 7D-501uV100R001C358B002
Baseband 21.526.00.00.000
while surfing the internet yesterday i found a site with developer called [email protected]
http://www.needrom.com/
which i found an update to this mobile 7D-501u V100R001C233B017
http://www.needrom.com/mobile/x1-7d-501u-3/
the question is would be there any problem to flash this update to my phone ???? because they say ( chineses channel )
second if there any problem could i downgrade to another version or the original firmware and how ????????????
with regards
Click to expand...
Click to collapse
Mine is 7D-501u. Flashing B017 is not a problem. When you reboot, it will ask you what language you want to use. I do not see a language listed for Egypt, but there are English/Spanish/French/Italian/Deutsch/Portugue, and Chinese.
I would like to suggest that you download from the official Huawei website:
http://consumer.huawei.com/cn/support/downloads/detail/index.htm?id=21804
It is in Chinese but you will find the download symbol/link on the right side. Extract the zip file, and put the files on an SD card, reboot the phone and you are good to go.
You can downgrade following the same procedure, as long as you have the firmware files on the SD card. Make sure you make a copy of your current/original firmware.
first of all thank you wxppro
second could you please send screen shot, especially can the navigation bar be hidden or auto hide???
at last how could take a copy of my original firmware??
with regards
mm3omar said:
first of all thank you wxppro
second could you please send screen shot, especially can the navigation bar be hidden or auto hide???
at last how could take a copy of my original firmware??
with regards
Click to expand...
Click to collapse
The navigation bar can be hidden or unhidden by swiping from the bottom.
The easiest thing for you to do seems to be (1) find out the current version of your current firmware through Settings --> Updates --> System Updates, and then (2) search the Internet to find and download the firmware.
wxppro said:
The navigation bar can be hidden or unhidden by swiping from the bottom.
The easiest thing for you to do seems to be (1) find out the current version of your current firmware through Settings --> Updates --> System Updates, and then (2) search the Internet to find and download the firmware.
Click to expand...
Click to collapse
I was wondering if you could check if the Permission Manager is included in this firmware? It should be part of the Phone Manager app.
Unfortunately it is missing from the International one (B003).
Thanks in advance.
You can download 4.4.2 with emotion UI 2.3 at www.emui.com
for 7D-501u
for 7D-503L
mm3omar said:
Hello every one,
I bought huawei mediapad x1 7.0 from egypt
with build number 7D-501uV100R001C358B002
Baseband 21.526.00.00.000
while surfing the internet yesterday i found a site with developer called [email protected]
http://www.needrom.com/
which i found an update to this mobile 7D-501u V100R001C233B017
http://www.needrom.com/mobile/x1-7d-501u-3/
the question is would be there any problem to flash this update to my phone ???? because they say ( chineses channel )
second if there any problem could i downgrade to another version or the original firmware and how ????????????
with regards
Click to expand...
Click to collapse
That ROM link is just a mirror of the official rom from Huawei. Newest ROM for 501U is B007, Yes, the number went from B017 to B007, but B007 is newer.
Read this thread for all answers to your questions.
http://forum.xda-developers.com/hua...rom-official-huawei-mediapad-x1-b007-t2811863
acuratlsfan said:
That ROM link is just a mirror of the official rom from Huawei. Newest ROM for 501U is B007, Yes, the number went from B017 to B007, but B007 is newer.
Read this thread for all answers to your questions.
http://forum.xda-developers.com/hua...rom-official-huawei-mediapad-x1-b007-t2811863
Click to expand...
Click to collapse
Although it's B007 instead of B017, it's R002 instead of R001 - that's how you know it's newer. The B numbers reset when the R number goes up.
However I would warn against the B007 ROM, because it changes the dpi from 320 to 400 which ruins the UI.
Anybody actually got this Honor 5x KIW-L22 Malaysia marshmallow update.app? Please share!! Even if its beta version i'm willing to try! PLEASE HELP! :crying::crying:
GWhich build number arr you in?
If you are in ***B340 Build, you can try this update.
GOOGLE DRIVE LINK
https://drive.google.com/file/d/0B7NLT04ElYa1UlNVVlNYNjV3Y2c/view?usp=drivesdk
Thanks to @venom007...
vsriram92 said:
GWhich build number arr you in?
If you are in ***B340 Build, you can try this update.
GOOGLE DRIVE LINK
https://drive.google.com/file/d/0B7NLT04ElYa1UlNVVlNYNjV3Y2c/view?usp=drivesdk
Thanks to @venom007...
Click to expand...
Click to collapse
So you know, the lollipop versions of the 5x were B1xx and the MM versions are B3xx
So b301 - b310 - b320 - b340 - b350 all = MM
Oh.. Thanks for the Info @clsA
You can update through HiCare app or by manual update.
Update via HiCare app:
1. Install the latest version of HiCare application from Google Play from the following link - http://bit.ly/1sEiY1V
2. Open HiCare application -> select region as Asia Pacific and location as Malaysia -> Click on OS upgrade option.
3. Go through the Version Update details and agree to the terms and conditions -> click on Apply.
4. Click on system update in the Pop-up appeared and then click on check for updates.
5. You will find the New version update (If it is available) -> click on it and update to the latest version.
Manual update via OTA file:
1. First, download Android 6.0 OTA file for Honor 5X from http://download-c.huawei.com/download/downloadCenter?downloadId=83346&version=327474&siteCode=in
2. Now create a folder dload in the root of your internal storage or SD card and place the update.app file in that folder.
3. Now go to the phone settings–>update and press the menu button.
4. Now select choose Local update.
5. It will detect the update.app and installation process will start.
6. Wait until the installation process is complete and then reboot your device.
The manual update file belongs to indian version (KIW-L22). Since you said the same version, hoping so there wont be any difference.
Try manual ota update, far better than hicare
hicare app may do the job, just update to latest hicare app version from the play store, open it and select ur region and click on 'OS UPDATE EARLY ADOPTERS'
Im on this build : KIW-L22 c636b130
The ones you posted above :
GWhich build number arr you in?
If you are in ***B340 Build, you can try this update.
GOOGLE DRIVE LINK
https://drive.google.com/file/d/0B7N...w?usp=drivesdk
Thanks to @venom007...
&
the rest of the stock recovery forums with KIW L22
ARE all India variant. It doesnt work on KIW L22 Malaysia variant. I have tried ALL of it and all met with disappointment.
I have also tried with Hi-care application(old and new). I tried check updates and change location to Malaysia and checked as well. And as usual met with disappointment.. Nothing pops out.
I'm just hoping if there's anyone that have KIW L22 Malaysia variant ones(not the India variant ones).. Update.app ; Please share it here. Thank you very much.
triple1c86 said:
Im on this build : KIW-L22 c636b130
The ones you posted above :
GWhich build number arr you in?
If you are in ***B340 Build, you can try this update.
GOOGLE DRIVE LINK
https://drive.google.com/file/d/0B7N...w?usp=drivesdk
Thanks to @venom007...
&
the rest of the stock recovery forums with KIW L22
ARE all India variant. It doesnt work on KIW L22 Malaysia variant. I have tried ALL of it and all met with disappointment.
I have also tried with Hi-care application(old and new). I tried check updates and change location to Malaysia and checked as well. And as usual met with disappointment.. Nothing pops out.
I'm just hoping if there's anyone that have KIW L22 Malaysia variant ones(not the India variant ones).. Update.app ; Please share it here. Thank you very much.
Click to expand...
Click to collapse
so unlucky, maybe someone with malaysia varient shares the file.
I looked through on every forum in any thread that mentions Malaysian 5x, no recovery yet
PalakMi said:
I looked through on every forum in any thread that mentions Malaysian 5x, no recovery yet
Click to expand...
Click to collapse
some variants like the middle eastern and malaysian are sadly left out
venom007 said:
some variants like the middle eastern and malaysian are sadly left out
Click to expand...
Click to collapse
At least middle east got the update
PalakMi said:
At least middle east got the update
Click to expand...
Click to collapse
bt its kinda slow rollout compared to other regions, maybe they should consider every region with equal priority!!!
venom007 said:
bt its kinda slow compared to other regions, maybe they should consider every region with equal priority!!!
Click to expand...
Click to collapse
That's what we hope, but they always give priority to US and EU regions
PalakMi said:
That's what we hope, but they always give priority to US and EU regions
Click to expand...
Click to collapse
also indian version, update rolloyt faster, even with the latest voLTE and call recorder update.
venom007 said:
also indian version, update rolloyt faster, even with the latest voLTE and call recorder update.
Click to expand...
Click to collapse
India is one of the biggest markets, especially in mid-range, that's why they give priority, but again it's not good to see regions treated unfairly
PalakMi said:
India is one of the biggest markets, especially in mid-range, that's why they give priority, but again it's not good to see regions treated unfairly
Click to expand...
Click to collapse
hope they improve it with time.
PalakMi said:
India is one of the biggest markets, especially in mid-range, that's why they give priority, but again it's not good to see regions treated unfairly
Click to expand...
Click to collapse
Why should they use their resources on the region which doesn't asks update? That's the reason. May be.
As of my knowledge from the forums, people using India, UK and US variant are only asking for update. So they provide only for them.
Providing update for the need of only 10 persons will be cost inefficient for the region that doesn't requires update.
Malaysian users do want the latest update, malaysia is the biggest consumer of smartphone.
maybe because of some weird reasons, they are just being avoided.
I think their main focus is on US, EU and India
Hi everyone,
I need a stock rom for my phone. Before update OTA firmware 450MB (camera improvement) I have stock rom version v10a-222-10. After update, my stock rom version v10b-222-10. Where can I find this version of rom v10a-222-10? I check this site... //lg-firmwares.com/lg-h840-firmwares/
Hi !
You can find stock rom on the link you provided. Then, you have to use LG Up with Uppercut :
https://forum.xda-developers.com/lg-g5/development/uppercut-lgup-loader-g5-variants-t3511295
I manage to downgrade from 7.0 to 6.0 (even if it was a bit difficult). Btw, may i ask you a question : why do you want to downgrade ? This update seemed to be good, plus it bring february security patch and camera improvement.
I bought the lg g5 se one week ago and i also get this update !
I always think that the new update stock firmware more demanding than the old stock firmware... Correct me if I'm wrong? Phone works well, but it's the only reason why I want to do this...
Which version you download and installed? Can I install other stock rom from list? Can i install this version H84010b_00_OPEN_EU_OP_0222.kdz? Does not exist this version H84010a_00_OPEN_EU_OP_0222.kdz?
s4m3m4n said:
I always think that the new update stock firmware more demanding than the old stock firmware... Correct me if I'm wrong? Phone works well, but it's the only reason why I want to do this...
Which version you download and installed? Can I install other stock rom from list? Can i install this version H84010b_00_OPEN_EU_OP_0222.kdz? Does not exist this version H84010a_00_OPEN_EU_OP_0222.kdz?
Click to expand...
Click to collapse
Hello, I would suggest you to download the newest version from v10, i mean the following versions of v10a( v10b and so on) so if v10b is the most recent version of v10 then go for it. If you have the chance to download v10c for example, go for that one
Have you tried any of these versions? Which version do you use?
s4m3m4n said:
Have you tried any of these versions? Which version do you use?
Click to expand...
Click to collapse
Not with these roms, but with my previuos lg bello i tried to update, and i searched and figured out that the following letters are better versions than previous ones (less bugs for example)
Flash with TWRP
So, I've following problem:
1.played with busybox
2.messed everything up (bootloop)
3.no rom backup (and no rom at all, just the recovery, no os)
I really need your help:
Is there a possibility to get a stock rom (h840, bought in austria so german version)?
and not in KDZ, i dont know how to flash that.
Either as a flash-zip or img
I really appreciate your help.
Thanks,
The guy with a useless phone
metalgod666 said:
Is there a possibility to get a stock rom (h840, bought in austria so german version)?
and not in KDZ, i dont know how to flash that.
Click to expand...
Click to collapse
you need LGUP + uppercut to able to flash H840
and a firmware from https://lg-firmwares.com/lg-h840-firmwares/ in KDZ, which is official format from LG
it's no Austrian firmware there (my phone from Drei), while exist from other EU countries(my last update was from 2017-03-08 - and it's Italian, UK there)
also exist a Android 7(H84020xxx) for EU/SouthAmerica
upd: ROM is the same for all EU, but it's include additional software from mobile operators, which is different
ayaromenok said:
you need LGUP + uppercut to able to flash H840
and a firmware from https://lg-firmwares.com/lg-h840-firmwares/ in KDZ, which is official format from LG
it's no Austrian firmware there (my phone from Drei), while exist from other EU countries(my last update was from 2017-03-08 - and it's Italian, UK there)
also exist a Android 7(H84020xxx) for EU/SouthAmerica
upd: ROM is the same for all EU, but it's include additional software from mobile operators, which is different
Click to expand...
Click to collapse
Dude, I've just have to say how I f***ing love this community.
PLEASE!!!!! telll me if and when u r in austria (vienna), I will invite u for some beers!!
Really, big thank you and I really hope I can also help you once!
I'm 19 and pretty poor so u can imagine how I jump of joy!
So don't forget to write me when ur in the near!
Thanks,
Viktor
metalgod666 said:
Dude, I've just have to say how I f***ing love this community.
PLEASE!!!!! telll me if and when u r in austria (vienna), I will invite u for some beers!!
Click to expand...
Click to collapse
it's more important, that get you H840 back from almost a brick
been in Vienna in two month, beer is mine for you story about using busybox
Hi. Can flash LG G5 H848 with LG G5 H840 ROM?
I purchased an Xperia XZ1 in May, 2018. After use of couple of days, i noticed that i am unable to get latest updates (even my android security patch is of August 5, 2017 which should be of May/June'18 as per official XZ1 updates). Thereafter, I enquired on official Sony Mobile forum where i got to know that my unit is not a retail unit but meant for "commercial and journalism" purpose . Now after gathering such knowledge which is still not confirmed and i am worried about future updates, could anyone here help me regarding this issue so that I would get the official updates on my phone which is still showing that my phone has the latest software.
aadirizvi said:
I purchased an Xperia XZ1 in May, 2018. After use of couple of days, i noticed that i am unable to get latest updates (even my android security patch is of August 5, 2017 which should be of May/June'18 as per official XZ1 updates). Thereafter, I enquired on official Sony Mobile forum where i got to know that my unit is not a retail unit but meant for "commercial and journalism" purpose . Now after gathering such knowledge which is still not confirmed and i am worried about future updates, could anyone here help me regarding this issue so that I would get the official updates on my phone which is still showing that my phone has the latest software.
Click to expand...
Click to collapse
You should be able to flash the latest through flashtool if it does not help to connect it to Sony companion
Sent from my [device_name] using XDA-Developers Legacy app
Actually, I first tried PC Companion and it is showing that my phone has the latest software. Same is shown in the phone's System Update. What to do now...
Download firmware through Xperifirm and flash through Flashtool
What's your device model?
is your bootloader unlocked?
TurkO546 said:
Download firmware through Xperifirm and flash through Flashtool
What's your device model?
is your bootloader unlocked?
Click to expand...
Click to collapse
Model No. is G8342 and the Bootloader is locked.
Could you please guide me through the whole process of flashing the right firmware as I am new to all this and I think I have to do this.
Happened with me too, apparently some sellers online/local markets are selling storefront/demo devices after repackaging them and these do not get updates from sony officially but function fine, to confirm this you can check customization version of your phone and match it at https://xpericheck.com/device/G8342
If it's 1309-7037 (Commercial and Journalists) or 1311-2293 (StoreFront) then it is definitely demo unit :/
To check customization version:
Open the dialer
Enter *#*#7378423#*#* and press dial
Tap on Service info
Tap on Software info
Look for Customization Version
I'd suggest to try returning device if possible..
jawadamin3 said:
Happened with me too, apparently some sellers online/local markets are selling storefront/demo devices after repackaging them and these do not get updates from sony officially but function fine, to confirm this you can check customization version of your phone and match it at https://xpericheck.com/device/G8342
If it's 1309-7037 (Commercial and Journalists) or 1311-2293 (StoreFront) then it is definitely demo unit :/
To check customization version:
Open the dialer
Enter *#*#7378423#*#* and press dial
Tap on Service info
Tap on Software info
Look for Customization Version
I'd suggest to try returning device if possible..
Click to expand...
Click to collapse
Its the Commercial & Journalists' unit. Im afraid returning the device is not possibe now. I just want to confirm if I flash any other stock rom, would that make my phone have latest official updates as and when available?
Kindly my phone was the same when i have got it last month but I have flashed the mea ftf file through Xperia flashtool and now I am getting new update which is not shown at any website yet I think it is july security patch.
Update: New software version 47.1.A.12.235 now installed with july security patch.
I have a Galaxy s21 olympic edition with number SM-G991Q and i am not receiving montly updates. The last update was the August 2021 patch and was installed on August 30th.
Also smart switch on Windows is not detecting Any new updates.
I tried to reset the device without luck getting new updates.
Does anybody has the same problems with the Galaxy s21 SM-G991Q not receiving updates?
I have this phone too, I also only got the August security update.
Don't worry, they probably lost their update schedule before switching to Android 12. I got updates yesterday for SM-G9910.
I have the same phone and find it odd that it doesn't show up on sammobile or anywhere else.
Does anyone know where to find original firmwares for it?
I have too G991Q and I need flash to XAA because I need BAND 20 LTE my country help me pls or altwrnative stock ROM?
OK I solved writing on Mobile S21 G991Q 4G LTE Slovakia Band 20 ALLOWED
DirgiEx said:
OK I solved writing on Mobile S21 G991Q 4G LTE Slovakia Band 20 ALLOWED
Click to expand...
Click to collapse
how did you solve the problem? I need band 20 too
TZS03 said:
how did you solve the problem? I need band 20 too
Click to expand...
Click to collapse
[Guide] Service Mode and CSC Guide/Enable LTE/5G Bands and Services/5G Low Band on U1
Hello All, Many people have asked about service mode and CSC related questions and I thought we should get a discussion going that is all in one place. *DISCLAIMER* I do not take any responsibility for any issues that may occur from changing...
forum.xda-developers.com
DirgiEx said:
[Guide] Service Mode and CSC Guide/Enable LTE/5G Bands and Services/5G Low Band on U1
Hello All, Many people have asked about service mode and CSC related questions and I thought we should get a discussion going that is all in one place. *DISCLAIMER* I do not take any responsibility for any issues that may occur from changing...
forum.xda-developers.com
Click to expand...
Click to collapse
Thank You! finaly works
TZS03 said:
Thank You! finaly works
Click to expand...
Click to collapse
Well on november 8th i finally got the october 2021 update. Hopefully the android 12 update will follow zoon
I have a question about the G991Q, did any of you get the ESIM to work yet? It is currently software locked - in theory it should have it because it is a Snapdragon chip
Do you have Android 12 on G991Q already? Im checking every day but still no luck Should I install non olympic rom? Will that work? Thanks
@Corbik
This particular variant has yet to receive the stable One UI 4/Android 12 update.
@jussy
See here; the model number of this variant is SM-G991Q and the CSC is SJP. At the time of posting this, the latest available firmware version is G991QOPU1AUJ2.
my version is g9910 and still no update to android 12.
last version a11 octuber security update....
whats happend....
What standard version would be closest to G991Q? I tried to flash U1 ROM but no luck
Friends i'm also with the SM-G991Q olympic version.. I really need to switch to CSC from ZTO, to try to use VOLTE and WIFI CALLING from my operator in my country, Brazil!
Can someone please help me change CSC to ZTO ? I tried the tutorial above, but it doesn't open anything when typing the codes, were you able to change? I saw that it only works on android 10. but we are on android 11.
I saw that you have the option to change CSC ANDROID 11 via Samkey, but I believe it still doesn't have support for our SM-G991Q device.
@TZS03 @DirgiEx @SkandaH
Corbik said:
What standard version would be closest to G991Q? I tried to flash U1 ROM but no luck
Click to expand...
Click to collapse
Have you tried switching to another S21 variant's ROM with Snapdragon 888? it worked out ?
If it doesn't work, I think I found our ROM to perform restoration via ODIN, in brink event:
https://samfrew.com/pt/download/Galaxy__S21__5G__/zq1d/SJP/G991QOPU1AUJ2/G991QQOP1AUJ2/
jominguta said:
Have you tried switching to another S21 variant's ROM with Snapdragon 888? it worked out ?
If it doesn't work, I think I found our ROM to perform restoration via ODIN, in brink event:
https://samfrew.com/pt/download/Galaxy__S21__5G__/zq1d/SJP/G991QOPU1AUJ2/G991QQOP1AUJ2/
Click to expand...
Click to collapse
Yes I tried the U1 version since it should be US version with Snapdragon888.
That ROM you found, based on the numbers is exactly what is in my phone now.
I think I will just wait some more time to get official Android 12 update, hopefully our special version wont be forgotten
But If somebody know which ROM would also work for SM-G991Q and ideally would also support all languages and features (esim for example) please share
Corbik said:
Yes I tried the U1 version since it should be US version with Snapdragon888.
That ROM you found, based on the numbers is exactly what is in my phone now.
I think I will just wait some more time to get official Android 12 update, hopefully our special version wont be forgotten
But If somebody know which ROM would also work for SM-G991Q and ideally would also support all languages and features (esim for example) please share
Click to expand...
Click to collapse
True, I hope we don't forget... friend know how I can change CSC to ZTO ?