Hello....any1 has it?
i can't s off/change cid due to no rom...i only have bootloader/download access.where do i find the correct ruu for this phone?
and btw?is it the dev edition or att?....it's my first contact with a htc device....
qnrip said:
Hello....any1 has it?
i can't s off/change cid due to no rom...i only have bootloader/download access.where do i find the correct ruu for this phone?
and btw?is it the dev edition or att?....it's my first contact with a htc device....
Click to expand...
Click to collapse
stock and dev stock htc roms are on their website
http://www.htc.com/us/support/rom-downloads.html
i have this problem too.
with my
htc one m9
with|
(bootloader) kernel: lk
(bootloader) product: htc_himaulatt
(bootloader) version: 1.0
(bootloader) imei: 357227061076764
(bootloader) version-main: 3.38.502.31
(bootloader) boot-mode: download
(bootloader) version-baseband: 01.01_U11440801_96.01.51207A_F
(bootloader) version-bootloader: 1.0.0.0000
(bootloader) mid: 0PJA11000
(bootloader) cid: CWS__001
_______________________________________________________________________
UPDATE!!!!!
DEC,20 2017
I HAVE FIXED MY PHONE
From state of
rom status MODIFIED
Unlocked
S-OFF
. Fixed It through.
RUU.
https://forum.xda-developers.com/on...-t3132698/post64299771?nocache=1#post64299771
All from this site.
then. my Software version is. 3.38.502.31
so i use this RUU link.
https://www.androidfilehost.com/?fid=961840155545568681
which s version is 3.38.502.41
It successfully flashed to my phone.
through. RUU
using aruwizard.
Related
Hello XDA Devs,
Would like to know what is the best version of firmware to install? Was trying to figure out why the signal strength is worse after going to ARHD 41.
Phone Info:
ARHD 41 - Android 4.4 (KitKat) - latest official HTC One 4.06.1540.3 (WWE) firmware (4x.x series)
TWRP 2.6.3.3
S-Off
Sku_ID to 7
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.14.3250.13
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.26.502.10
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4002mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
getvar:all FAILED (status read failed (Too many links))
finished. total time: 0.070s
Based on what I read here: http://forum.xda-developers.com/showthread.php?t=2419699
It seems a firmware update is in order. The question is:
Should I update to this firmware version, since ARHD 41 is based on that firmware and just change the CID? (latest) 4.4 KITKAT DEVELOPER EDITION OTA 4.06.1540.3 Custom Firmware (Stock Boot.img & Stock Recovery removed), if yes, how to I properly change the CID, instructions?
or
Should I follow what the thread suggested flash 1st, ATT 4.2.2 OTA 1.26.502.15 Firmware (HBOOT, Recovery, & Boot.img are removed); 2nd, (Credit to @dark2099 for providing the OTApkg.zip)(latest) ATT 4.3 Official OTA 3.17.502.3 Firmware/Not From The RUU (Boot.img & Recovery.img removed); and wait for ATT 4.4 firmware to come out.
or
Any suggestion/options?
Any other things I should look out for or prepare before the firmware update?
Thanks again for all the great help having this awesome forum and all the awesome devs/community. :good:
BCocoPop said:
Hello XDA Devs,
Would like to know what is the best version of firmware to install? Was trying to figure out why the signal strength is worse after going to ARHD 41.
Phone Info:
ARHD 41 - Android 4.4 (KitKat) - latest official HTC One 4.06.1540.3 (WWE) firmware (4x.x series)
TWRP 2.6.3.3
S-Off
Sku_ID to 7
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.14.3250.13
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.26.502.10
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4002mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
getvar:all FAILED (status read failed (Too many links))
finished. total time: 0.070s
Based on what I read here: http://forum.xda-developers.com/showthread.php?t=2419699
It seems a firmware update is in order. The question is:
Should I update to this firmware version, since ARHD 41 is based on that firmware and just change the CID? (latest) 4.4 KITKAT DEVELOPER EDITION OTA 4.06.1540.3 Custom Firmware (Stock Boot.img & Stock Recovery removed), if yes, how to I properly change the CID, instructions?
or
Should I follow what the thread suggested flash 1st, ATT 4.2.2 OTA 1.26.502.15 Firmware (HBOOT, Recovery, & Boot.img are removed); 2nd, (Credit to @dark2099 for providing the OTApkg.zip)(latest) ATT 4.3 Official OTA 3.17.502.3 Firmware/Not From The RUU (Boot.img & Recovery.img removed); and wait for ATT 4.4 firmware to come out.
or
Any suggestion/options?
Any other things I should look out for or prepare before the firmware update?
Thanks again for all the great help having this awesome forum and all the awesome devs/community. :good:
Click to expand...
Click to collapse
well considering your s-off and AT&T I suggest the 3.17 AT&T Firmware
clsA said:
well considering your s-off and AT&T I suggest the 3.17 AT&T Firmware
Click to expand...
Click to collapse
Thx for the suggestion. Since, I already have custom rom installed, flashing the firmware now, will it change anything? Or do I have to re-flash the rom again? Really don't want to redo all the data inside. lol :silly:
From what I was reading on the forum, I shouldn't have to worry about that, right?
Thx again for the assistance.
BCocoPop said:
Thx for the suggestion. Since, I already have custom rom installed, flashing the firmware now, will it change anything? Or do I have to re-flash the rom again? Really don't want to redo all the data inside. lol :silly:
From what I was reading on the forum, I shouldn't have to worry about that, right?
Thx again for the assistance.
Click to expand...
Click to collapse
just make sure the firmware you dl doesn't say it wipes data
clsA said:
just make sure the firmware you dl doesn't say it wipes data
Click to expand...
Click to collapse
I see, thx, will look out for that. :good:
Hello,
I am going to sell my T-Mobile HTC One, but I would like to return my device back to stock using the RUU method.
Here is what pops up when I issue the command fastboot getvar all:
Code:
(bootloader) version: 0.5
(bootloader) version-bootloader: [B]1.57.0000[/B]
(bootloader) version-baseband: [B]4T.27.3218.14[/B]
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: [B]5.14.531.1[/B]
(bootloader) version-misc: PVT SHIP [B]S-OFF[/B]
(bootloader) serialno: Censored
(bootloader) imei: Censored
(bootloader) meid: 00000000000000
(bootloader) product: [B]m7_ul[/B]
(bootloader) platform: HBOOT-8064
(bootloader) modelid: [B]PN0713000[/B]
(bootloader) cidnum: [B]T-MOB010[/B]
(bootloader) battery-status: good
(bootloader) battery-voltage: 4040mV
(bootloader) partition-layout: Generic
(bootloader) security: [B]off[/B]
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-1f512bb6
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
My HTC One is S-OFF, unlocked bootloader, with TWRP 2.6.3.3 installed. Not sure if it matters but I'm running ARHD 82.0. I already have the 6.10.531.9 RUU file from the official HTC Support website.
So my question is: How do I run this RUU? Do I need to do anything to my phone before running the RUU.exe file? And after flashing the RUU, will I still receive OTA's from T-Mobile?
Thanks.
You have to relock your bootloader. After that, just boot your phone into fastboot and run the RUU.exe
You'll receive the OTA from TMO again. I've done it a few time.
JSing said:
You have to relock your bootloader. After that, just boot your phone into fastboot and run the RUU.exe
You'll receive the OTA from TMO again. I've done it a few time.
Click to expand...
Click to collapse
Even if I'm S-OFF? And will I be able to unlock it again?
uwotm7 said:
Even if I'm S-OFF? And will I be able to unlock it again?
Click to expand...
Click to collapse
Yes you'll retain your S-OFF after it and you can unlock it again if you want.
uwotm7 said:
Even if I'm S-OFF? And will I be able to unlock it again?
Click to expand...
Click to collapse
@JSing
FYI, if you are S-OFF you do not need to relock your bootloader to run a RUU or firmware.
Which RUU are you using, by chance. I am doing the same thing and trying to figure out which one I need. North American, unlocked. 32 GB. T Mobile.
knightsmarian said:
Which RUU are you using, by chance. I am doing the same thing and trying to figure out which one I need. North American, unlocked. 32 GB. T Mobile.
Click to expand...
Click to collapse
Try this one 6.10.531.9.
Currently I am running CM12 and here is my firmware info:
M8_UL_CA PVT SHIP S-ON
HBOOT-3.19.0.0000
RADIO-1.21.213311491.A04G
OpenDSP-v47.2.2-00564-M8974_FO.1024
OS-
eMMC-boot 2048MB
Dec 2 2014,22:40:49.0
I have been trying all day to downgrade to 4.4.4 using RUU and zip files but no luck so far.
I have decided to finally go for sunshine. BUT sunshine wants me to use a stock or near stock rom. What rom would you suggest me to install? Or what other options do I have at this point?
devbro said:
I have been trying all day to downgrade to 4.4.4 using RUU and zip files but no luck so far.
Click to expand...
Click to collapse
You are only "downgrading" the ROM, not the firmware. RUU should work fine, as long as its the AT&T 4.4.4 RUU. Did you relock the bootloader? Any error messages for the RUU?
No idea what "zip files" you are trying to flash (stock ROM, firmware, zip full of porn?) as you are the opposite of specific.
devbro said:
I have decided to finally go for sunshine. BUT sunshine wants me to use a stock or near stock rom. What rom would you suggest me to install? Or what other options do I have at this point?
Click to expand...
Click to collapse
Its pretty self explanatory, a stock AT&T ROM is your best best.
redpoint73 said:
You are only "downgrading" the ROM, not the firmware. RUU should work fine, as long as its the AT&T 4.4.4 RUU. Did you relock the bootloader? Any error messages for the RUU?
No idea what "zip files" you are trying to flash (stock ROM, firmware, zip full of porn?) as you are the opposite of specific.
Its pretty self explanatory, a stock AT&T ROM is your best best.
Click to expand...
Click to collapse
I keep on getting error 155 from RUU. and attempting to lock bootloader gives me SPMI write failure.
I have tried this file last:
http://dl3.htc.com/application/RUU_...40.45.C33065.00_F_release_426617_signed_2.exe
still no go
To confirm, your bootloader currently says UNLOCKED?
What is your current CID?
redpoint73 said:
To confirm, your bootloader currently says UNLOCKED?
What is your current CID?
Click to expand...
Click to collapse
My bootloader is unlocked.
cid: CWS__001
here is a fastboot getvar all:
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.21.213311491.A04G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: FA45AWM06131
(bootloader) imei: AAAAAAAAAA
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul_ca
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B12000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: c88f4560
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.073s
Everything on the phone looks okay to run an AT&T RUU. It sounds like you tried more than one, so that pretty much eliminates the possibility the RUU file was damaged/corrupt, etc.
Did you by change convert to GPE (black bootloader screen)?
I have an AT&T M8 which has an old version of the GPE SkyDragon ROM installed.
Bootloader is unlocked, S-ON is still ON.
Android version: 5.0.1
Baseband version: [email protected]_40.34.C35006.02_F
Kernel version: 3.4.0-SkyDragon-V3.0.7 from Jan 2014.
Build number: SkyDragon - LRX22C.H5
I want to send this phone to another country, and for that I need to get it sim-unlocked. I got the unlock code from AT&T, but it doesn't work - I am assuming the ROM is at fault, so I am trying to get the phone back to full stock by flashing an official RUU.
I downloaded the latest official RUU from http://www.htc.com/us/support/htc-one-m8-att/news/, but I cannot get it to flash!
When trying and the phone is booted to regular android, it tells me about error 170, which, as I gather, means it cannot find the phone.
I installed HTC Sync, and that can't find the phone either.
If I reboot to bootloader, the RUU installer finds the phone, but after the HTC logo (silver with black background) shows up on the phone, it throws error 171.
It feels like I need to relock the bootloader but I am afraid to mess it up now.
Please help with some guidance..
Here is the bootloader screen:
Edit: Found an old RUU on my hard drive, version 3.42.502.1 - same as OS version in the screenshot.
I attempted to flash it (using the official exe). It failed on "updating signature" with error 155.
Edit2: Made sure CID and MID match original - they do.
Attempted 'fastboot oem lock'. Now trying to flash the old RUU again.
Edit3: Looks like it's working! RUU is progressing further than ever before.
Edit4: It worked! Booting to Sense now.
Edit5: SIM unlocked worked too, phone is ready to go.
I'll leave this post up in case someone else faces a similar situation.
To run the Marshmallow RUU, try to flash the MM firmware first. See the red font note under the RUU section of my Index thread: http://forum.xda-developers.com/showthread.php?t=2751432
I was actually able to just flash the latest official RUU over 3.42.502.1 without the need for commandline.
Back to Stock
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: [email protected]
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.20.502.5
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT45SWM06618
(bootloader) imei: XXXXXXXXXXXXXXX ( Deleted)
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul_ca
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B12000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 205bdca3
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.125s
Bootloader - Unlocked
Recovery - TWRP
Rooted - Yes
Custom ROM - Resurrection Remis 5.8.5 Final
if want to go back to stock what is procedure
i have below RUU
RUU_M8_UL_M60_SENSE70_ATT_MR_Cingular_US_6.20.502. 5_combined.exe
can i run this exe after relock the bootloader?
Appreciate any help. I'm considering all options. My phone got stuck on the boot screen after taking a security update and I was wondering if it's possible to just flash the Marshmallow RUU , i don't mind losing the data its already backed up.
Unlocked bootloader, S-OFF
Variant - M8_UL_CA
CID - BS_US001
OS - 4.16.1540.8
You'll need to flash the MM firmware first (this is a peculiarity with the MM RUU - if you don't the RUU will fail with Error 155), then flashing the RUU is fine.
Also, in the current configuration, you'll need to flash the Developer's Edition RUU (not sure if that is what you meant).
But otherwise, if you are fine with losing your data, I don't seen an issue with running the RUU.
Back to stock
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: [email protected]
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.20.502.5
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT45SWM06618
(bootloader) imei: XXXXXXXXXXXXXXX ( Deleted)
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul_ca
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B12000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 205bdca3
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.125s
Bootloader - Unlocked
Recovery - TWRP
Rooted - Yes
Custom ROM - Resurrection Remis 5.8.5 Final
if want to go back to stock what is procedure
i have below RUU
RUU_M8_UL_M60_SENSE70_ATT_MR_Cingular_US_6.20.502. 5_combined.exe
can i run this exe after relock the bootloader?
safrassm said:
Bootloader - Unlocked
Recovery - TWRP
Rooted - Yes
Custom ROM - Resurrection Remis 5.8.5 Final
if want to go back to stock what is procedure
i have below RUU
RUU_M8_UL_M60_SENSE70_ATT_MR_Cingular_US_6.20.502. 5_combined.exe
can i run this exe after relock the bootloader?
Click to expand...
Click to collapse
Yes.
Need Ruu .zip for HTC M8 for this variant
< waiting for device >
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.09.20.1112
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: FA46DSF03997
(bootloader) imei: 990004992158356
(bootloader) imei2: Not Support
(bootloader) meid: 99000499215835
(bootloader) product: m8_whl
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B70000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 205bdca3
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.019s
Bootloader - Unlocked
Recovery - TWRP
Rooted - yes
Custom ROM - lenage 14.1
shihab94rs said:
74616699(bootloader) product: m8_whl
(bootloader) modelid: 0P6B70000
Click to expand...
Click to collapse
The info above indicates you have the Sprint version. This forum section is specific to the AT&T version M8.
The RUU zips you are looking for, are here: https://forum.xda-developers.com/showthread.php?t=2729173
Also, you should delete your IMEI, serial number, and MEID from the getvar data. Those are personal info, that should never be posted in open forums.
help
Good evening,
I currently have an HTC one M8 under:
version Android: 5.0.2
version sense: 6.0
version ROM 4.28.502.2
I would like to update my Android phone Marshmallow. I am a little lost on the forums.
Thank you for your help.
***Software status: Official ***
***RELOCKED ***
M8_UL PVT SUIP S-OFF
CI-11111111
HBOOT-3.19.0.0000
[email protected]
OpenDNP-v47.2.2-00564-M8974_FO.1024
OS-4.28.502.2
eMMC-boot 2048MB
info tel:
fastboot getvar all
INFOversion: 0.5
INFOversion-bootloader: 3.19.0.0000
INFOversion-baseband: [email protected]
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 4.28.502.2
INFOversion-misc: PVT SHIP S-OFF
INFOserialno: SH43XXXXXXXX
INFOimei: 35XXXXXXXXXXXXX
INFOimei2: Not Support
INFOmeid: 00000000000000
INFOproduct: m8_ul
INFOplatform: hTCBmsm8974
INFOmodelid: 0P6B10000
INFOcidnum: 11111111
INFObattery-status: good
INFObattery-voltage: 0mV
INFOpartition-layout: Generic
INFOsecurity: off
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: 7f8e91a3
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
-----------------------
Hombalala said:
Good evening,
I currently have an HTC one M8 under:
version Android: 5.0.2
version sense: 6.0
version ROM 4.28.502.2
Click to expand...
Click to collapse
Look in my Index thread under "RUU" and you will find a link for the Marshmallow RUU 6.20.502.5 as well as a note (in red font) on flashing the firmware.zip before installing the RUU.
So flash the firmware.zip in fastbootRUU mode, than install the RUU (with phone connected to PC). That is all you need to do.
Did you relock the bootloader to run an RUU, or was it already relocked when you got the phone?
redpoint73 said:
Look in my Index thread under "RUU" and you will find a link for the Marshmallow RUU 6.20.502.5 as well as a note (in red font) on flashing the firmware.zip before installing the RUU.
So flash the firmware.zip in fastbootRUU mode, than install the RUU (with phone connected to PC). That is all you need to do.
Did you relock the bootloader to run an RUU, or was it already relocked when you got the phone?
Click to expand...
Click to collapse
it already unlocked when you got the phone
Hombalala said:
it already unlocked when you got the phone
Click to expand...
Click to collapse
I think you mean to say: the phone was already bootloader relocked when I got the phone.
In any case, you can do as I stated in the previous post. Backup any personal data you want to keep, before you install the RUU. The RUU will wipe the phone.
redpoint73 said:
I think you mean to say: the phone was already bootloader relocked when I got the phone.
In any case, you can do as I stated in the previous post. Backup any personal data you want to keep, before you install the RUU. The RUU will wipe the phone.
Click to expand...
Click to collapse
So do i need my bootloader locked before trying to install MM Firmware then MM Ruu? I am on the same version as of Android 5.0.2, Software 4.28.502.1 and Sense 6.0 as Homblala up above. Mine HTC One M8 is an ATT Version
ELEVO said:
So do i need my bootloader locked before trying to install MM Firmware then MM Ruu?
Click to expand...
Click to collapse
Correct. Bootloader must be locked or relocked to flash firmware and/or RUU. Unlocked bootloader will not allow firmware/RUU to install. Exception is if you have s-off (which bypasses the requirement to relock the bootloader).
Unbricked )
redpoint73 said:
Correct. Bootloader must be locked or relocked to flash firmware and/or RUU. Unlocked bootloader will not allow firmware/RUU to install. Exception is if you have s-off (which bypasses the requirement to relock the bootloader).
Click to expand...
Click to collapse
Thanks for the help. I soft bricked my phone while trying to flash MM firmware so I can install Lineage 15.1 along with Gapps 8.1
All running well now, Thanks all for your help :good:
ELEVO said:
Thanks for the help. I soft bricked my phone while trying to flash MM firmware so I can install Lineage 15.1 along with Gapps 8.1
Click to expand...
Click to collapse
I know what you did. I just don't think you do.
Read my responses to your other threads/posts for a more detailed explanation. No boot after flashing firmware is completely normal and expected. I told you to flash firmware and RUU. You only did firmware.