This may or may not work
Guys this is what I do to get volte on my N roms
what I normally do is flash cm 14 by SantoshM and boots into The ROM(N roms boot very fast, even its first boot) , after that I go to recovery and wipe everything (system,cache,dalvik,data) and install ROM of my choice(data wipe may not be necessary
Tell me if it works for you
Sorry for bad english
Related
Hello guys,
I wanted to flash Cyanogen 13.0 on my OPX. I followed the instructions on the Cyanogen-Downloadsite, but after flashing with TWRP I always stucking at the bootlogo....
I waited more than 30 min, but nothing happens... While flashing I get no errors or warnings.... It seems to be alright...
Then I tried another Marshmallow ROM, but I get always the same issue...
Thank you in adavance!
need more info dude, what rom were you before the issue presented itself ? recovery version ? data, cache & system formatted to which filesystem ? what did you wipe ? what all did you flash with or after the rom ?
hi
asuming u have opened bootloader and have installed twrp this is what i do
1.put the rom and gapps on the root of the phone storage
2. factory/data rest in twrp
3.flash rom via twrp
4.clean chache/delvi
5.flash gaaps
6.clean cache/delvi again
reboot system and im good to go try this do a full flash the way i have mentioned dont do a dirty flash
im sure u will succeed good luck
If you didn't unlock the bootloader then it will not boot anything other than the stock OS.
Hello i tried to isntall cm13 with twrp but when i install it stucks on mi logo. i have some questions.
it needs miui 8 or miui 7?
twrp have problem? or gapsss???
when i try to install without any rom i mean without even miui it shows me again the mi LOGO
please answer me and help me as fast as you can!!!!!
really forgive me for my bad english
it doesn't matter if your on miui 8 or miui 7,... the cm13 rom has complete files,...
may be you have a corrupted download,... download cm13 again,.... and install again
chiragkrishna said:
it doesn't matter if your on miui 8 or miui 7,... the cm13 rom has complete files,...
may be you have a corrupted download,... download cm13 again,.... and install again
Click to expand...
Click to collapse
i tried man i tried it didnt show me the cm13 logo only mi logo should i wait?
first of all backup data and wipe data in twrp if ur coming from miui as default miui is encrypted. hope this helps
yeap me tooo.... I tried everything i could ... wipe cache / delvik cache format all data ... nothing can help me ...
Pffff.... should I wipe and internal storage and then make a clean install of cm13?? Some one tell me step by step how to install? And give me download links? I know there are many posts how to download cm13
georgesalo said:
Pffff.... should I wipe and internal storage and then make a clean install of cm13?? Some one tell me step by step how to install? And give me download links? I know there are many posts how to download cm13
Click to expand...
Click to collapse
Download CM13 from herecm-13.0-20161020-UNOFFICIAL-gemini.zip
Now, Assuming you have Unlocked bootloader & TWRP 3.x installed.
1. Boot into TWRP
2. Go to Wipe section - Select Dalvic, Data, Syatem and Cache. ( If you dont care out your stuffs, select internal also)
3. Transfer the downloaded cm-13.0-20161020-UNOFFICIAL-gemini.zip to your phone. ( Your device will show up in your PC as MTP Device)
4. Goto Install Section
5. Select the cm-13.0-20161020-UNOFFICIAL-gemini.zip and Swipe to Install.
6. Wait for the installation to complete, Reboot.
7. Thats all, Done!
#If you want Google Apps also, flash Gapps from here OpenGapps *Recommended ( ARM64_6.0_Pico)
I'll try one more time thanks for replying
I installed mokee stable multilanguage....its not bad im gonna try now to install cm13
How long did u wait?
The process may take several minutes
No more than 5 min...now all works great...i installed cm13 finaly...it came and automatically update cm13 nightly....
**sorry for my bad english. I guess you understand
Hi,
yesterday i went through the process of flashing custom rom and i just want to share my experience.
My daily driver was the latest MIUI7 because it was very stable and battery life was good (stock global stable, locked bootloader). But i decided to try custom rom mainly because i had strange performance issues every now and then.
1. Applied for official unlock - Unlock Page
2. I read many posts and i tought it might be best to upgrade to MIUI8 first. I updated with the official updater app.
3. Unlocking didnt work because you need a Developer Rom of MIUI installed to link the device to you Mi account and successfully unlock. I downloaded latest global dev rom and flashed with official updater app.
4. Unlocked successful with official Mi Unlock Tool.
5. Installing TWRP ZCX - worked and was easy
6. Backup System, Data, Firmware, Modem with TWRP (didnt need it so far)
7. Flash Nitrogen OS
8. Reboot to system - "to start android enter password" - surprised and shocked so i googled and found a hint to "format data" because storage might be encrypted.
9. In TWRP - Wipe i "formated data" so all files were deleted! be sure to backup everything!
10. Nitrogen OS booted (no need for Gapps - everything is built in)
11. Flash fingerprint fix - apparently i have the Goodix and need this fix for fingerprint to work
12. I was confused because there was no caller app (call worked but no UI) so i flashed new and again and tried Psy Firmware but i just had to set the caller app in settings.
13. All is working good so far :fingers-crossed:
Thanks for all the work done by this community. I greatly appreciate all the cool stuff! :highfive:
EDIT: I have FPC sensor not Goodix. The fix is for FPC! Thanks to @Denis:) for pointing that out.
You are wrong on some points ;p
Its so easy to flash roms on all snapdragon devices
Theres a need for gapps, it doesnt come preinstalled on roms, which is a good thing.
If you flashed fpc fix and it works now, it means you have FPC sensor, not goodix (which is good -like me), dev of NOS will make fpc default from now on.
For next time, you need to format data when you come from Miui MM, because it encrypts data by default.
Also I suggest formatting data,cache to F2FS, it actually makes it even faster a bit imo, but ita not a must.
Denis:) said:
For next time, you need to format data when you come from Miui MM, because it encrypts data by default.
Also I suggest formatting data,cache to F2FS, it actually makes it even faster a bit imo, but ita not a must.
Click to expand...
Click to collapse
I have installed LineageOS several times over MIUI but I didn't need to format data. Why does this happen in nitrogen os, any idea?
Denis:) said:
...
Click to expand...
Click to collapse
The level of difficulty may be different for different people
I flashed NitrogenOS and Gapps but then did a wipe and flashed only NiOS but in the end i had all the Google apps... Maybe this part didn't get wiped - Thanks for pointing that out.
Right, FPC sensor - my mistake
The encryption thing was confusing because there is not much info on that topic here - especially the guides. Thanks for confirming this is a thing.
This F2FS format thing is done in TWRP?
If you didnt wipe system aswell, gapps and ROM persisted.-dirty flash (update ROM)
If you want to update ROM + gapps, you must wipe System aswell with dalvik/art, cache
Then flash ROM+gapps , wipe cache and reboot
F2FS is done in twrp but you must have f2fs compatible twrp - I successfuly use rc1 latest by TheStrix, obviously if you choose to format data, cache you will lose data and you will have to clean flash ROM.
P.s By the way, when was your device made? Im just curious
funkymaster said:
The level of difficulty may be different for different people
I flashed NitrogenOS and Gapps but then did a wipe and flashed only NiOS but in the end i had all the Google apps... Maybe this part didn't get wiped - Thanks for pointing that out.
Right, FPC sensor - my mistake
The encryption thing was confusing because there is not much info on that topic here - especially the guides. Thanks for confirming this is a thing.
This F2FS format thing is done in TWRP?
Click to expand...
Click to collapse
If you want to experiment please try to format the partitions using f2fs and tell us your results.
I tried it but was unsuccessful since when I tried it there was no recovery that could support f2fs. Remember only dadii's TWRP works still I recommend you confirm it again.
Im using this one by thestrix and it works perfect;
https://www.androidfilehost.com/?fid=529152257862707658
currently i don't feel like tinkering with my phone any more. So i keep the F2FS in mind for some time in the future
Hm i don't know where to find the build date of my phone i bought it April 2016
Hi,
On mot Pie ROMs, My kate can't pass 1st boot wizard. It stay on "seraching updates"...
I use non treble ROMs and I've already tried to wipe or format system data...
Any idea ?
https://forum.xda-developers.com/redmi-note-3/development/rom-pixel-experience-t3835648
this Pie rom have gapps include, not need to flash zip with gapps.
Thanks I know this ROM.
But I'd like to try some others to compare
So i am now on pixel experience Rom. and in the future i would like to try other roms what to do and how to install them using TWRP ?
like should i wipe data like when i installed my first rom only ? or data and system ?
and should i install vendor ROM and Disaple force encryption again after i wipe ?
or just delete data and install the new rom ?
i will really appreciate the help !
Thanks in advance !
TheVow said:
So i am now on pixel experience Rom. and in the future i would like to try other roms what to do and how to install them using TWRP ?
like should i wipe data like when i installed my first rom only ? or data and system ?
and should i install vendor ROM and Disaple force encryption again after i wipe ?
or just delete data and install the new rom ?
i will really appreciate the help !
Thanks in advance !
Click to expand...
Click to collapse
Remove your password pin pattern then wipe data system cache if you don't clean flash then you will get alot of force crashes. You can dirty flash on top of the same rom though if it's just a incremental update.
1. Remove pattern and pin. If you don't do this step then you will have to factory reset your phone with stock MIUI.
2. Wipe all except internal storage and external storage.
3. Flash vendor and rom.
4. Flash disableforceencryption with magisk 18.0.
5. Flash your twrp again so it isn't replaced by stock.
pingufanpoy said:
Remove your password pin pattern then wipe data system cache if you don't clean flash then you will get alot of force crashes. You can dirty flash on top of the same rom though if it's just a incremental update.
1. Remove pattern and pin. If you don't do this step then you will have to factory reset your phone with stock MIUI.
2. Wipe all except internal storage and external storage.
3. Flash vendor and rom.
4. Flash disableforceencryption with magisk 18.0.
5. Flash your twrp again so it isn't replaced by stock.
Click to expand...
Click to collapse
Thank you! I understood every step except for 5.
I am installing roms using twrp how is it gonna be replaced?
I thought replacing happens when i install miui.
Am i missing something?
TheVow said:
Thank you! I understood every step except for 5.
I am installing roms using twrp how is it gonna be replaced?
I thought replacing happens when i install miui.
Am i missing something?
Click to expand...
Click to collapse
hey bro
search for MULTIROM thread
you can flash multiple roms and your primary one won't be touched or affected as long as you follow the instructions.
for me ,i always use one of miui roms as a primary ( some bugs occur if miui used as secondary )
& AOSip/ pixel experience/ ..... as secondary roms.. add as much as you want.
learn the procedure carefully then you are ready to go.
ahmd gom3aa said:
hey bro
search for MULTIROM thread
you can flash multiple roms and your primary one won't be touched or affected as long as you follow the instructions.
for me ,i always use one of miui roms as a primary ( some bugs occur if miui used as secondary )
& AOSip/ pixel experience/ ..... as secondary roms.. add as much as you want.
learn the procedure carefully then you are ready to go.
Click to expand...
Click to collapse
Mbrt74 l 7war el multi roms dh :"D
TheVow said:
Mbrt74 l 7war el multi roms dh :"D
Click to expand...
Click to collapse
???? welcome ya kbeer
elfekra en 3ndk primary untouched in case u dont like 2ry.
Yes, Multirom is the way to go
https://forum.xda-developers.com/poco-f1/development/multirommiui-custom-roms-gsi-t3868734
TheVow said:
Thank you! I understood every step except for 5.
I am installing roms using twrp how is it gonna be replaced?
I thought replacing happens when i install miui.
Am i missing something?
Click to expand...
Click to collapse
No, you are right. Only OEM ROMs which have recovery built in will replace TWRP. None of the custom ROMs to my knowledge have recovery built in. So no need to flash TWRP again unless you are flashing OEM ROMs.
Even when flashing OEM ROMs, if you flash Magisk immediately after the ROM before booting, TWRP will remain.