Plz help... Phone asking password after flashing radios nx kenzo..... I was on resurrectin remix 5.8 with zcx recovery.... Working fine.... Nw i cant go to recovery... fast boot is working
Go to fastboot mode and flash twrp via adb commands! After u have done this successfully reply here and I will give you further instructions to delete password! ? ! Thank me if it's helpful and I would be happy! ?
ajeshmanu said:
Plz help... Phone asking password after flashing radios nx kenzo..... I was on resurrectin remix 5.8 with zcx recovery.... Working fine.... Nw i cant go to recovery... fast boot is working
Click to expand...
Click to collapse
asking password where..?
c_/\/\_k said:
asking password where..?
Click to expand...
Click to collapse
at the start up screen
ajeshmanu said:
at the start up screen
Click to expand...
Click to collapse
Search AGNI here in xda, there is a zip called AGNI toolbox, flash that zip and in aroma choose: remove security or something like that, I don't remember exactly the option, then boot into system.
ckflash09 said:
Go to fastboot mode and flash twrp via adb commands! After u have done this successfully reply here and I will give you further instructions to delete password! ? ! Thank me if it's helpful and I would be happy! ?
Click to expand...
Click to collapse
i tried to flash miui fastboot rom thru edl..bt edl didnt work....system showed "null" ..anyway flashed twrp 3.0.2 unofficial....zcx was not working,it was showing only red screen with some picture..then i factory reset then flashed RR again...success
Cool buddy! Congo!
ajeshmanu said:
i tried to flash miui fastboot rom thru edl..bt edl didnt work....system showed "null" ..anyway flashed twrp 3.0.2 unofficial....zcx was not working,it was showing only red screen with some picture..then i factory reset then flashed RR again...success
Click to expand...
Click to collapse
Congo! ??
Related
Hi,
I just bricked my OPX and I can't flash a new recovery because of "remote: dtb not found".
It won't boot normally either so there's nothing I can do.
Btw, I have unlocked my bootloader and fastboot is working.
Would appreciate advice!
Refer to this guide http://http://forum.xda-developers.com/oneplus-x/general/guide-mega-unbrick-guide-hard-bricked-t3272108
jesse4444 said:
Hi,
I just bricked my OPX and I can't flash a new recovery because of "remote: dtb not found".
It won't boot normally either so there's nothing I can do.
Btw, I have unlocked my bootloader and fastboot is working.
Would appreciate advice!
Click to expand...
Click to collapse
Flash blue spark twrp v41 or stock recovery of marshmellow... They ll work, if u need link, let me know.
cva_kabil said:
Flash blue spark twrp v41 or stock recovery of marshmellow... They ll work, if u need link, let me know.
Click to expand...
Click to collapse
You don't ask on what OOS Version he is before advising that?
Kéno40 said:
You don't ask on what OOS Version he is before advising that?
Click to expand...
Click to collapse
Which ver r u in
Guys i flashed official twrp 3.0.2.2 in my redmi note 3 sd using flashify when i reboot to recovery it is asking for password to decrypt data
I tried with my lockscreen password but dint worked anyone please help me
ROM?
Sent from my Redmi Note 3 using Tapatalk
itsmboyaj said:
Guys i flashed official twrp 3.0.2.2 in my redmi note 3 sd using flashify when i reboot to recovery it is asking for password to decrypt data
I tried with my lockscreen password but dint worked anyone please help me
Click to expand...
Click to collapse
Flash zcx twrp or format data
auliamaster74 said:
ROM?
Click to expand...
Click to collapse
I am using rr 5.7.4
marko94 said:
Flash zcx twrp or format data
Click to expand...
Click to collapse
I was having pblms with zcx thats why i flashed official nd now having this pblm wht can i do now
itsmboyaj said:
I was having pblms with zcx thats why i flashed official nd now having this pblm wht can i do now
Click to expand...
Click to collapse
Did u activate "Require PIN before turn on the phone"?
Sent from my Redmi Note 3 using Tapatalk
auliamaster74 said:
Did u activate "Require PIN before turn on the phone"?
Click to expand...
Click to collapse
No bro i clicked on no thanks when it asked me to do so
itsmboyaj said:
No bro i clicked on no thanks when it asked me to do so
Click to expand...
Click to collapse
Try "default_password" without quotation mark
And apparently you posted on the wrong section, just saying.
Sent from my Redmi Note 3 using Tapatalk
auliamaster74 said:
Try "default_password" without quotation mark
And apparently you posted on the wrong section, just saying.
Click to expand...
Click to collapse
Sorry i am a newbie dont knw much abt rules here
I tried default_password dint worked for me bro
itsmboyaj said:
Sorry i am a newbie dont knw much abt rules here
I tried default_password dint worked for me bro
Click to expand...
Click to collapse
Did you set Password/PIN/Pattern for your device? Try to put it
I don't really know about this since I don't have any issue like this now
Well, I had when I was running MIUI 6.10.13 (Marshmallow), then I flashed ZCX TWRP and it fixed my issue
Sent from my Redmi Note 3 using Tapatalk
Reflash ZCX Twrp!
Can i flash recovery alka?
Will it solve decrypt pass pblm?
As i have pblm while flashing in zcx i dont want to flash it again
Flash MIUI 8 Global STABLE.Then flash the twrp. It worked for me.!
I dont want to go back to miui
Any other solution please
Format storage in TWRP
When you switch from MIUI to other roms, the stoge is automatically encrypted so you have to format it to decrypt.
Thanks all
I flashed alka twrp and my pblm solved
Once again thanks to all
Select factory reset
i flashed zcx-twrp and it solved it
just enter ur password or pin which u kept on ur lock screen
SOLUTION for TWRP LOCKED
#1. Reset the factory settings, it's okay if it's not allowing.
#2. Boot into the rom and remove all passwords and uncheck the "require password on startup".
#3. Boot to Unlocked recovery successfully.
Worked for me!!
I had twrp installed and then i flashed cm13
A fews days later i flashed xposed using twrp and after flashing, it said that stock recovery was trying to replace twrp and asked to swipe to disable it.
i swiped it.
now when i try to boot to recovery, its stuck at mi logo
everything else working fine
just i cant boot into recovery now.
i flashed twrp again using fastboot
but still i m unable to boot to recovery.
Any help would be appreciated
Thanks in advanvce
Flash it using miflash tool.
You have tried flashing using miflash before , haven't you?
Then the procedure is the same, only this time you have to rename twrp file into recovery.img then overwrite original recovery.img in the target miflash folder. Don't forget to remove other files you don't want to be flashed to your device I.e system , data , etc , just keep .XML files or other text files .
Then after you think ready just go flash it
Good luck sir
Yokohart said:
Flash it using miflash tool.
You have tried flashing using miflash before , haven't you?
Then the procedure is the same, only this time you have to rename twrp file into recovery.img then overwrite original recovery.img in the target miflash folder. Don't forget to remove other files you don't want to be flashed to your device I.e system , data , etc , just keep .XML files or other text files .
Then after you think ready just go flash it
Good luck sir
Click to expand...
Click to collapse
Thanks for the reply
will try that
hope it works
yashthakur797 said:
Thanks for the reply
will try that
hope it works
Click to expand...
Click to collapse
You're welcome and good luck
Now I realised that there is no problem with twrp
Actually booting to recovery is taking too long
Whenever I boot to recovery, it shows the mi logo for 5-10 mins and then twrp boots up
Any idea what is the reason for it??
yashthakur797 said:
Now I realised that there is no problem with twrp
Actually booting to recovery is taking too long
Whenever I boot to recovery, it shows the mi logo for 5-10 mins and then twrp boots up
Any idea what is the reason for it??
Click to expand...
Click to collapse
Because you're still on stock firmware , maybe?
Yokohart said:
Because you're still on stock firmware , maybe?
Click to expand...
Click to collapse
i have installed the cm13 firmware
that might not be the reason
yashthakur797 said:
i have installed the cm13 firmware
that might not be the reason
Click to expand...
Click to collapse
which cm13 firmware by who?
actually if you have cm13 firmware the boot logo should change to cm13 logo.
cm13 firmware provided by thestrix
in my case i get the mi logo and then cm13 boot animation
the normal boot speed is fine
but when i boot to recovery, it takes a long time
Hi Guys,
I've got a SGP511 WiFi only (castor_windy), with root access and an unlocked bootloader. but to install AOSP 7.1 I need to update my version of TWRP to 3.0.0.
I installed TWRP via TabZ2-lockeddualrecovery2.8.26 batch file and can access recovery but every time i select install look at my SD card and change to images and select the castor_winsy 3.0.0 image i dont get an option to install to recovery i only get kernel how do i resolve this ?
I have re flashed FW (KitKat) via flashtool loads of times
rooted
installed TabZ2-lockeddualrecovery2.8.26 batch file
and every time i get the same option.... cant flash to recovery or boot only kernel
i have attached a screenshot so that nobody thinks i am going mad
can you please help me thanks :fingers-crossed:
It's been a while since I used TWRP 2.8.XX...so no idea what's the issue there but I'd just flash TWRP recovery via fastboot. Worked for me without any problems :good:
T4ke5 said:
It's been a while since I used TWRP 2.8.XX...so no idea what's the issue there but I'd just flash TWRP recovery via fastboot. Worked for me without any problems :good:
Click to expand...
Click to collapse
Hi ... Is that using the ADB fastboot recovery TWRP.img?
I am on KitKat just wondering if that's why it won't work have you got to be on 6.01 ?
Well, actually it shouldn't matter on which Android version you are, but to have the latest boot.img and radio.img installed I'd flash the latest stock ROM available here on XDA which means by the way having TWRP 3.0.2.0 as well and after that you might be ready for AOSP 7.1
Just have look at kulvertti's thread in the "General" subforum. Since you have already intalled a custom recovery there shouldn't be any problems.
Lockeddual recovery is not compatible with any custom rom
Please follow the instructions in the thread
rcstar6696 said:
Lockeddual recovery is not compatible with any custom rom
Please follow the instructions in the thread
Click to expand...
Click to collapse
Hi @rcstar696 have you got a link to the instructions please as I can't seem to find it ... thanks
nickbaker66 said:
Hi @rcstar696 have you got a link to the instructions please as I can't seem to find it ... thanks
Click to expand...
Click to collapse
http://forum.xda-developers.com/xpe.../aosp-6-0-marshmallow-sony-xperia-z2-t3235935
first two steps of instruction
rcstar6696 said:
http://forum.xda-developers.com/xpe.../aosp-6-0-marshmallow-sony-xperia-z2-t3235935
first two steps of instruction
Click to expand...
Click to collapse
Hi @rcstar6696,
i had no problem flashing the boot.img that part was ok but when i went to flash the recovery it never seemed to work for me, in the terminal window in the SDK programme tools folder which is the same folder as the image i downloaded from your thread is in (Twrp-3.0.0-0-castor-windy.img and twrp_castor_windy.img) it said something about sizes but said it went ok tried to boot into recovery and it never worked
in the terminal window whilst my SGP511 was in fastboot mode i typed fastboot recovery Twrp-3.0.0-0-castor-windy.img is this is correct script or have i got this wrong ?
i am currently on Kitkat does this matter
thansk
nickbaker66 said:
in the terminal window whilst my SGP511 was in fastboot mode i typed fastboot recovery Twrp-3.0.0-0-castor-windy.img is this is correct script or have i got this wrong ?
thansk
Click to expand...
Click to collapse
The right command is
fastboot flash recovery PathToRecovery*
Click to expand...
Click to collapse
*C:\stuff\more_stuff\TWRP_castor-windy.img for instance
T4ke5 said:
The right command is
*C:\stuff\more_stuff\TWRP_castor-windy.img for instance
Click to expand...
Click to collapse
Cheers guys I'll give that a go
T4ke5 said:
The right command is
*C:\stuff\more_stuff\TWRP_castor-windy.img for instance
Click to expand...
Click to collapse
rcstar6696 said:
http://forum.xda-developers.com/xpe.../aosp-6-0-marshmallow-sony-xperia-z2-t3235935
first two steps of instruction
Click to expand...
Click to collapse
hi guys i tried what you said and still could get it to work, please see screenshot and check if i have entered something wrong, i dont thinki have but i might be wrong
is it because i have not done the boot image first via fastboot ?
Looks quite good. Did you already try to enter the recovery?
T4ke5 said:
Looks quite good. Did you already try to enter the recovery?
Click to expand...
Click to collapse
i tried to access recovery via the down volume button when the tablet starts up but no green light appears and it just starts normally ...... i ve not flashed the boot.img first then flashed recovery as ive seen it can be done via recovery the only option left now is to try flashing the boot.img first .... i have no option but to try that tonight and see if that can do it that way
@T4ke5 @rcstar6696 thanks very much guys for your help TWRP on 3.0.0 now and AOSP 7.1 installed now
Sweet! :good:
T4ke5 said:
Sweet! :good:
Click to expand...
Click to collapse
Don't laugh but I can't put my WiFi code in because there's no keyboard just tap to speak how can I have the keyboard back lol
T4ke5 said:
The right command is
*C:\stuff\more_stuff\TWRP_castor-windy.img for instance
Click to expand...
Click to collapse
Cheers mate worked a treat
Hi guys,
Before you say again a topic on a non bricked One Plus X, I would like to let you know that I've checked and try almost all of the tutorial I've seen on xda and one plus forum.
I was on CM14.1 with this ROM : https://forum.xda-developers.com/oneplus-x/orig-development/rom-cyanogenmod-14-onyx-t3452150
Unfortunately, I made the 25-12-2016 update and it totally broke up the phone..
I download the OnePlus X OxygenOS 3.1.4 on the One Plus website. So I flash it on the stock recovery, it tells me "Install success" then I reboot and it stays on the bootlogo.
For information, I can't access the oem unlock menu if needed, but when I ask the oem device info it says unlocked. The phone is detected by the computer sometimes with unknown device and sometimes correctly with the qualcomm drivers..
I have a back up made from TWRP, I can access the device by the fastboot mode, it seems that all the operations written here worked but it doesn't install or even boot on TWRP..
Thanks for your help guys.
Are you using latest TWRP from website think version 3.0.3?
Exodusche said:
Are you using latest TWRP from website think version 3.0.3?
Click to expand...
Click to collapse
I'm not even using TWRP, since I can't boot on it.. But I tried to flash the twrp-3.0.2-2 from blue spark v41, after the installation via Flashboot, it doesn't boot up on the recovery..
So after flashing TWRP you use fastboot boot recovery.img and nothing happens?
Exodusche said:
So after flashing TWRP you use fastboot boot recovery.img and nothing happens?
Click to expand...
Click to collapse
Exactly, the phone is stuck on the one plus logo..
defqon_1 said:
Exactly, the phone is stuck on the one plus logo..
Click to expand...
Click to collapse
If you did not unlocked bootloader properly then also you might face the problem...
to unlock bootloader: https://forum.xda-developers.com/oneplus-x/general/discussion-how-to-root-oneplus-x-t3242830
make sure you follow all the step. (If you didn't followed these steps then lock bootloader {fastboot oem lock} and unlock using this mathod, worked for me.)
Falsh this kernal after flashing rom and gapps, https://forum.xda-developers.com/oneplus-x/development/kernel-arsenic-kernel-r2-t3422020
Don't forget to hit :good:
Divyesh49 said:
If you did not unlocked bootloader properly then also you might face the problem...
to unlock bootloader: https://forum.xda-developers.com/oneplus-x/general/discussion-how-to-root-oneplus-x-t3242830
make sure you follow all the step. (If you didn't followed these steps then lock bootloader {fastboot oem lock} and unlock using this mathod, worked for me.)
Falsh this kernal after flashing rom and gapps, https://forum.xda-developers.com/oneplus-x/development/kernel-arsenic-kernel-r2-t3422020
Don't forget to hit :good:
Click to expand...
Click to collapse
Didn't work. I tried to lock and then unlock to be sure but not is stay in false for tempered AND unlocked.
So I don't have any idea on how make android back on my phone.
I just have access to Fastboot mode. No recovery, nothing else..
EDIT : phone is not starting anymore. I try to charge it hoping it just a low battery problem..
You should send it to RMA
Trimis de pe al meu Redmi 3S folosind Tapatalk
Finally, I resolved the problem I don't know how but for the moment I have stock recovery and stock rom ! :laugh:
I will wait for a stable rom for Nougat. Thanks for the help guys !
PS : how do I close or write resolved at the top of the subject ?
Help Pls
defqon_1 said:
Finally, I resolved the problem I don't know how but for the moment I have stock recovery and stock rom ! :laugh:
I will wait for a stable rom for Nougat. Thanks for the help guys !
PS : how do I close or write resolved at the top of the subject ?
Click to expand...
Click to collapse
I have the same problem, access to fastboot but no to recovery. How do you resolved it?
UBCM said:
I have the same problem, access to fastboot but no to recovery. How do you resolved it?
Click to expand...
Click to collapse
Start by seeing if you can fastboot flash stock recovery from any 2.X.X OOS. Then fastboot flash twrp 3.0.2. If your on new bootloader meaning latest ROMs or OOS3 then you need to boot into 3.0.2 and from there you can flash IMG of twrp 3.0.3. Make sure you boot right back into recovery after flashing any twrp or it won't stick. This worked for me when I lost my recovery twice but always remember at your own risk. Not responsible if you make your phone into a paper weight.
Fix It!
Exodusche said:
Start by seeing if you can fastboot flash stock recovery from any 2.X.X OOS. Then fastboot flash twrp 3.0.2. If your on new bootloader meaning latest ROMs or OOS3 then you need to boot into 3.0.2 and from there you can flash IMG of twrp 3.0.3. Make sure you boot right back into recovery after flashing any twrp or it won't stick. This worked for me when I lost my recovery twice but always remember at your own risk. Not responsible if you make your phone into a paper weight.
Click to expand...
Click to collapse
Done! finally i can reinstall stock rom and recovery with drivers by usb.
UBCM said:
I have the same problem, access to fastboot but no to recovery. How do you resolved it?
Click to expand...
Click to collapse
I have tried multiple tools that I find on XDA. I put all the zip files like bootloader update and rom on my sdcard. And by a great night, the OOS 3.1.4 finally booted up ! So I don't have a miracle solutions that can help you..
Done
defqon_1 said:
I have tried multiple tools that I find on XDA. I put all the zip files like bootloader update and rom on my sdcard. And by a great night, the OOS 3.1.4 finally booted up ! So I don't have a miracle solutions that can help you..
Click to expand...
Click to collapse
Don't worry i have restored my OPX 5 days ago. I used the method of this video: https://youtu.be/R4SVSovw4Jo and files from this thread: https://forum.xda-developers.com/oneplus-x/general/guide-mega-unbrick-guide-hard-bricked-t3272108 , if it can help someone.