I'm told I shouldn't run flashtool to flash stock (ie trying other stock based roms) and should flash a .zip instead.
How do I create a zip or where can I download one for .305?
I'm trying multirom and would like to try another stock-based rom. I can't run flashtool as it would wipe everything including multirom.
Related
Hello,
I am really a beginner with flashing roms and I just flashed my first CWM and CM 10.1 rom.
But the version I chose has a few bugs, so I want to flash a different CM version. should I do it the same way as I changed from the stock ROM to CM 10.1, by moving it to root path and then via recovery choose install zip from sd card? What I also don't know is what will happen with the GAPPS. I flashed it right away the first CM flashing. but will I need to flash GAPPS again?
Also, If I want to change from non-touch CWM to touch-CWM, I do it via Odin in the same way I first flashed the non-touch CWM? Will that over-write the existing CWM?
Sorry I am really a beginner, but at least I flashed the first rom
Thanks to everyone who helps :good:
verynoob said:
Hello,
I am really a beginner with flashing roms and I just flashed my first CWM and CM 10.1 rom.
But the version I chose has a few bugs, so I want to flash a different CM version. should I do it the same way as I changed from the stock ROM to CM 10.1, by moving it to root path and then via recovery choose install zip from sd card? What I also don't know is what will happen with the GAPPS. I flashed it right away the first CM flashing. but will I need to flash GAPPS again?
Also, If I want to change from non-touch CWM to touch-CWM, I do it via Odin in the same way I first flashed the non-touch CWM? Will that over-write the existing CWM?
Sorry I am really a beginner, but at least I flashed the first rom
Thanks to everyone who helps :good:
Click to expand...
Click to collapse
Yes, all you said is the correct way. Its that way itself.
To sum it up, if you want to flash a different CM, reboot into CWM recovery, Wipe Data/Cache/Dalvik cache and flash the zip package and flash the gapps and do a wipe data/cache/dalvik cache again. Yes you need to flash GAPPS each time when you install CM.
For changing recovery, if you have another version installable via Odin, then you can go on with it, and it will replace your existing recovery.
Be sure to check this Table to know which GAPPS should be installed for which CM version.
Happy Flashing!
Would the following work as a way to try out, for example Cyanogenmod 10. I am currently running a 4.1.2 install (pretty much stock just rooted/cwm via Philz as per the tutorial). I have a complete backup made via Philz recovery of this rom along with the kernel (which I believe is still stock from that) and efs.
1) Install a custom kernel (eg. dorimanx 9.x?) via the Philz recovery.
2) Install cm-10.2-20140102-NIGHTLY-i9100.zip.
3) To return to the original rom, reflash the original kernel (with whatever CWM is included in dorimanx) - then reflash the backed up rom via the same recovery?
I hope this is clear enough a question.
I believe you have to flash a stock rom through Odin, to return to complete stock. Just flashing a stock kernel isn't enough, and is surely not going to work (so don't do it).There are also tutorials how to remove the yellow triangle afterwards.
Please correct me if I'm wrong
Donnie Sins said:
I believe you have to flash a stock rom through Odin, to return to complete stock. Just flashing a stock kernel isn't enough, and is surely not going to work (so don't do it).There are also tutorials how to remove the yellow triangle afterwards.
Please correct me if I'm wrong
Click to expand...
Click to collapse
This is the part I'm most unsure of. Ideally I'm trying to figure out the process that lets me go from CM10.2 (and whatever recovery) to the point I am running the backed up rom rooted with PhilZ-cwm6-XWLSW-XEU-5.06.1-signed.zip again. Very confused on how to do so.
TopherBrink said:
This is the part I'm most unsure of. Ideally I'm trying to figure out the process that lets me go from CM10.2 (and whatever recovery) to the point I am running the backed up rom rooted with PhilZ-cwm6-XWLSW-XEU-5.06.1-signed.zip again. Very confused on how to do so.
Click to expand...
Click to collapse
Topher,
If you have rooted and cwm via philz, you already have a modified kernel installed. I believe the philz-cwm6 should be as close to stock kernel with the CWM incorporated. You don't need to add another kernel, because it will be replaced when you install the custom ROM. You should just be able to flash the cm10.2 via philz or via odin. You can then flash the dormanix kernel if you want - can't comment on that kernel - or if it has cwm included.
I would also suggest that you consider backing up you /efs folder (one with you imei information etc) prior to flashing any custom roms. People have been using hcKtool to do the backups and also an actual copy as well.
Depending on the custom rom, you may have connection problems with your network. So you may want to consider keeping a copy of your modem.bin file from your stock rom handy in case you need to flash onto the custom rom.
If you want to go back to stock, then you just need to flash the stock rom - you can check sammobile website for your stock rom or use the backup that you made.
I should point out that I have yet to do any of the above - I gathered this from reading the forums. Some more experienced forum users can add corrections. I rooted my phone a couple of months ago and now considering installing custom rom in the next couple of months.
Thanks.
if u flash a custom rom (cm10.2 for example), it already included kernel as well. so if u want to try out other custom kernel, i can flash it after you are done flashing a custom rom but make sure it is compatible with your android version. (u cant use custom kernel that not support android 4.3 with a custom rom running android 4.3)
I have Phil Touch 6.0.4.5 CWM installed.
I put this on to try CM11. Didn't like it so re-flashed the the latest official ROM and its been running fine for a while now.
Theres a new official update out I wanted to try but flashing via CWM it says "Installation aborted".
I then tried the older official ROM and this too aborts hower CM11 installs fine.
Any ideas? I am Wiping ROM and clearing Cache.
You cannot flash official updates with custom recovery. You need the stock recovery for it.
A word of caution. The new OTA update most likely has knox. If you plan to try out other custom roms, refrain from flashing. If you are only a stock rom user, flash away.
Silesh.Nair said:
You cannot flash official updates with custom recovery. You need the stock recovery for it.
A word of caution. The new OTA update most likely has knox. If you plan to try out other custom roms, refrain from flashing. If you are only a stock rom user, flash away.
Click to expand...
Click to collapse
Thats odd. I could have sworn I reflashed the official rom using CWM.
Thanks for clearing that up.
Can I still enter standard recovery having CWM on there or do I need to reflash via a standard recovery via odin?
You need to flash one using Odin. If you have a flashable recovery zip file, you can replace the recovery image in the zip file with a stock one.
Sent from my GT-I9205 using Tapatalk
i searched forum but i am unable to find way to install recovery to install Cm12.1 from official link official site have recovery *.img and ROM zip but i find no solution on how to install recovery
In my other phone(htc,xiaomi) i can just reboot to bootloader and fastboot flash recovery but this method is not working on samsung phone
kindly update me or show xda link showing how to install CM12.1 recovery on my SII 9100 T model phone i already downloaded ROM and Recoveyr.img from
https://download.cyanogenmod.org/?device=i9100
Does my i9100 T model support 12.1 ?
KiranP23 said:
i searched forum but i am unable to find way to install recovery to install Cm12.1 from official link official site have recovery *.img and ROM zip but i find no solution on how to install recovery
In my other phone(htc,xiaomi) i can just reboot to bootloader and fastboot flash recovery but this method is not working on samsung phone
kindly update me or show xda link showing how to install CM12.1 recovery on my SII 9100 T model phone i already downloaded ROM and Recoveyr.img from
https://download.cyanogenmod.org/?device=i9100
Does my i9100 T model support 12.1 ?
Click to expand...
Click to collapse
Forget about the recovery.img. I don't know why it is there. On the i9100(and i9100T), there is no seperate recovery partition. It is bundled with the kernel. So if you have a custom recovery that is capable of flashing a lollipop rom, just use that. Once you have flashed CM12.1, the CM recovery(kernel) will overwrite the recovery(kernel) you had anyway. Which is not a good thing(not that you have a choice). Currently the CM recovery is not very functional compared to CWM or TWRP
noppy22 said:
Forget about the recovery.img. I don't know why it is there. On the i9100(and i9100T), there is no seperate recovery partition. It is bundled with the kernel. So if you have a custom recovery that is capable of flashing a lollipop rom, just use that. Once you have flashed CM12.1, the CM recovery(kernel) will overwrite the recovery(kernel) you had anyway. Which is not a good thing(not that you have a choice). Currently the CM recovery is not very functional compared to CWM or TWRP
Click to expand...
Click to collapse
Thank you that answers many things , now can u kindly provide a LINK to recovery which is supported by my S2 I9100 T and flashing method so i can install CM12.1 nighties
KiranP23 said:
Thank you that answers many things , now can u kindly provide a LINK to recovery which is supported by my S2 I9100 T and flashing method so i can install CM12.1 nighties
Click to expand...
Click to collapse
I'm assuming you have stock unrooted firmware? The easiest way is to install philz kernel from stock(3e) recovery, then reboot to recovery and flash a newer recovery that is capable of flashing the newer versions of android. If you just want to install CM12.1 straight away just back up your efs then:
1. Download the DVLSH kernel .zip from HERE
2. Download the philz 6.48.4 from HERE
3. Reboot into stock recovery, flash the DVLSH kernel(if your firmware build is DVL**, you could probably reboot into system no problem)
4. Reboot to recovery(not system), flash the philz 6.48.4
5. Reboot to recovery(not system), follow the steps for installing in the CM12.1 thread after backing up etc
Keep the DVLSH kernel. Once you install CM, you will have CM recovery, which only allows you to flash signed .zips(which this one is)
EDIT - The philz 6.48.4 is also signed and is probably the more useful one to keep, being compatible with the newer roms
noppy22 said:
I'm assuming you have stock unrooted firmware? The easiest way is to install philz kernel from stock(3e) recovery, then reboot to recovery and flash a newer recovery that is capable of flashing the newer versions of android. If you just want to install CM12.1 straight away just back up your efs then:
1. Download the DVLSH kernel .zip from HERE
2. Download the philz 6.48.4 from HERE
3. Reboot into stock recovery, flash the DVLSH kernel(if your firmware build is DVL**, you could probably reboot into system no problem)
4. Reboot to recovery(not system), flash the philz 6.48.4
5. Reboot to recovery(not system), follow the steps for installing in the CM12.1 thread after backing up etc
Keep the DVLSH kernel. Once you install CM, you will have CM recovery, which only allows you to flash signed .zips(which this one is)
EDIT - The philz 6.48.4 is also signed and is probably the more useful one to keep, being compatible with the newer roms
Click to expand...
Click to collapse
thankyou i will backup efs with efs backup application form playstore then follow the procedure
thankyou , like you installed flashed recovery i installed from official LInk , flashed nano gapps = boots ,keyboard FC , after sometime frequent random reboots heavily
installed again after full formating ,wipe,dav cache etc flash only cm12.1 nighties =still FC keyboard and random reboots
help me pls
kbxdauser2011 said:
Kiran, i'm in the same stage as you for installing cm 12.1.1 on my SGS2 (GT-I9100) Stock 4.1.2 Rom (Non rooted). Can you please share the steps (step by step) you took to took to install the same . Also how good or Bad is it to be used as a daily regular rom compared to the Samsung Stock rom for the SGS2 (GT-I9100)?
Click to expand...
Click to collapse
noppy22 said:
I'm assuming you have stock unrooted firmware? The easiest way is to install philz kernel from stock(3e) recovery, then reboot to recovery and flash a newer recovery that is capable of flashing the newer versions of android. If you just want to install CM12.1 straight away just back up your efs then:
1. Download the DVLSH kernel .zip from HERE
2. Download the philz 6.48.4 from HERE
3. Reboot into stock recovery, flash the DVLSH kernel(if your firmware build is DVL**, you could probably reboot into system no problem)
4. Reboot to recovery(not system), flash the philz 6.48.4
5. Reboot to recovery(not system), follow the steps for installing in the CM12.1 thread after backing up etc
Keep the DVLSH kernel. Once you install CM, you will have CM recovery, which only allows you to flash signed .zips(which this one is)
EDIT - The philz 6.48.4 is also signed and is probably the more useful one to keep, being compatible with the newer roms
Click to expand...
Click to collapse
please look at above steps
[SOLVED]
Recently I've installed Oreo AOSP, I wanted to return flashing from TWRP but stucks on bootanimation, I tried with XGen but the problem persists
Also I tried through flashhtool but the program it doesn't detect my phone, also I tried with Emma, the process was completed correctly but when I boot up the phone the custom ROM is there
Im going to try flashing the Loire kernel through TWRP, at least I want to move to LineageOS
Flash a stock based custom rom (XGEN or Persian Rom) - dirty or clean /system is your choice. If you want extra then flash the clean patched kernel in the rooting thread (we actually don't need this)
Note that the phone won't boot properly and will bootloop, but now the phone will be recognize as F5121/22 in flashtool so you can flash the rom as normal.
n0k0m3 said:
Flash a stock based custom rom (XGEN or Persian Rom) - dirty or clean /system is your choice. If you want extra then flash the clean patched kernel in the rooting thread (we actually don't need this)
Note that the phone won't boot properly and will bootloop, but now the phone will be recognize as F5121/22 in flashtool so you can flash the rom as normal.
Click to expand...
Click to collapse
Already I solved the problem, i flashed the AOSP kernel in Existenz N, then I can boot as usual, however thanks for your answer