Hello,
I have a Wiko Bloom Android Version 4.4.2 Kernel-Version 3.4.67 MT6582 and an endoscop camera supplier Etron Technology USB 2.0 camera.
Did everyone know a OTG USB Camera App which support chip MT6582 ?
Thanks for your assistance and your support.
Best regards
Thomas
Related
If this is possible then we can port the roms that comeout for android one which runs on mt6582.
As we all know android one runs on mt 6582 . If it is possible then we could port it to our device . Also the cm12 is out for and roid one devices so we can port it.
Good evening guys,
I really need the help of the whole xda community regarding my device Cherry Mobile Magnum S (X130) which gives me a headache finding solutions on how am I going to put cwm in it due to its specs being limited. Also this device I think is just a rebranded phone on which I dont know how to find its original manufacturer, below is the SPECS of the device
Cherry Mobile Magnum S specs:
5-inch HD IPS display, 294ppi
Corning Gorilla Glass 3
1.7GHz MediaTek Octa-Core CPU
Mali-450MPGPU
1GB RAM
16GB internal storage
18 megapixel BSI rear camera w/ dual LED flash
8 megapixel front camera w/ LED flash
Dual-SIM (Micro + Standard Combo)
HSPA+
WiFi, Bluetooth
USB OTG
2,300mAh non-removable battery
Android 4.4 KitKat
7.1mm thin
132g
But then after I used MTK Droid Tools this is the device information
Hardware : MT6592
Model : X130
Build number : CHERRY_MOBILE_X130_V10
Build date UTC : 20140710-080822
Android v : 4.4.2
Baseband v: MOLY.WR8.W1315.MD.WG.MP.V34.P4, 2014/05/04 14:49
Kernel v : 3.4.67 ([email protected]) (gcc version 4.7 (GCC) ) #1 SMP Thu Jul 10 16:06:26 CST 2014
Uboot build v : -----
LCD Driver IC : 1-nt35521_qhd_dsi_vdo_yushun
THE BIGGEST PROBLEM IS THAT THIS DEVICE HAS NO SD CARD SLOT BUT HAS OTG FUNCTION
I have backed up the device using MTK DROID TOOLS but I dont know how am I going to put a CWM using this files since it has no SD Card SLOT..
I have a back up files using the mtk droid tools.
So anyone in there that are very intelligent and very kind please help me regarding this unsolvable problem for me..
Its Prestigio MultiPhone 5508 DUO but still needs help
Guys I already researched the brand I am looking for but I don't know the safest method to use and has no files to be used.
sir do u have a preloader of x130? can o havr a copy?
Hi Geeks,
I have an MT6589 Android phone running Android 4.2.2. And I tried to port a Kitkat rom for it and failed. It seemed that Ithere's some problems on kernel.(The normal kernel version is 3.4.5).The phone is Coolpad 7270_W00.It has 512MB RAM(IN fact 486MB),MT6589 CPU and 4GB emmc.
[email protected]
Thanks for you help!
PS: I tried to port from CM11 of Micromax A116, which was also MT6589
Hello everyone! Gamepad Logitech f310 usb / otg does not respond when I connect it to Xiaomi redmi note 2 (MIUI MultiROM stable 9.2.2.0, android 5.0.2. Kernel ver. 3.10.61, Mediatek Helio X10 MT6795 Cortex-A53 ). Found the information that there is no module in the kernel. "xpad.ko" I think. Where can I find this module? I would be very grateful if you could help me And sorry for bad English.