Related
Hi everyone,
I am not able to flash a "Middle East" KDZ for H860 over my phone which is H860 but with Taiwan Stock ROM. The phone is new; no rooting, no oem unlock, nothing. The current ROM version is 10e and I want to flash the AME KDZ which is basically 10g.
Using the patched version of LGFlashTool v2.0.1.6, I get an error "(S) Failed to Load". Using LGUP v1.14, the phone is recognized as H860, it restarts into download mode and gets to 9% (which is starting to send the KDZ to phone) and then it give an error msg:
Error: Error Code = 0x81000304
CBasicFlash::_func_LoadGPTF - ErrorCode:8224
I am working on a Windows 10 PC with all the drivers installed and I can access the phone through ADB, Fastboot, LG Bridge, with no issues. The only issue is that I am not able to flash the KDZ although it is for the same model H860.
I have tried a different PC and a re-downloaded the KDZ directly from LG's website. Same issues.
PS: In LGUP, I tried: Refurbish and Upgrade options.
Does anyone have any suggestions?
UPDATE: I tried flashing a Singapore KDZ for H860 as well and it gave the same errors.
This forum is not as useful as it used to be once upon a time. Disappointed.
Try with LG support tool from LG
Please update me with this case. I have twn vrsion also bought from one of the online shop in dubai and i want to flash also the uae kdz. thanks
---------- Post added at 06:49 PM ---------- Previous post was at 06:30 PM ----------
Dr.Alani said:
Hi everyone,
I am not able to flash a "Middle East" KDZ for H860 over my phone which is H860 but with Taiwan Stock ROM. The phone is new; no rooting, no oem unlock, nothing. The current ROM version is 10e and I want to flash the AME KDZ which is basically 10g.
Using the patched version of LGFlashTool v2.0.1.6, I get an error "(S) Failed to Load". Using LGUP v1.14, the phone is recognized as H860, it restarts into download mode and gets to 9% (which is starting to send the KDZ to phone) and then it give an error msg:
Error: Error Code = 0x81000304
CBasicFlash::_func_LoadGPTF - ErrorCode:8224
I am working on a Windows 10 PC with all the drivers installed and I can access the phone through ADB, Fastboot, LG Bridge, with no issues. The only issue is that I am not able to flash the KDZ although it is for the same model H860.
I have tried a different PC and a re-downloaded the KDZ directly from LG's website. Same issues.
PS: In LGUP, I tried: Refurbish and Upgrade options.
Does anyone have any suggestions?
UPDATE: I tried flashing a Singapore KDZ for H860 as well and it gave the same errors.
Click to expand...
Click to collapse
Please try this one:
thebiker said:
I solved the problem. I have just updated all LG file. LG UP, LG Lab, LG 850 DLL. Finally I successfully updated my phone.
Click to expand...
Click to collapse
http://forum.xda-developers.com/lg-g5/help/lg-g5-brick-root-t3411389
Get the updated tools here for H860:
http://www.mylgphones.com/download-lg-g5-stock-kdz-tot-firmware-lg-g5-h860.html
medo18 said:
Try with LG support tool from LG
Click to expand...
Click to collapse
Thanks for the suggestion. The LG support tool does not work with my version of LG G5 (I am not sure if it works with any G5 at all), it says that I need to use LG Bridge instead because LG Support Tools does not support my phone.
However, I tried the "Recovery" option in LG bridge, but it checks the IMEI and decides that my phone needs the latest Taiwan rom instead of what I want (which is UAE).
engineer000 said:
Please update me with this case. I have twn vrsion also bought from one of the online shop in dubai and i want to flash also the uae kdz. thanks
---------- Post added at 06:49 PM ---------- Previous post was at 06:30 PM ----------
Please try this one:
http://forum.xda-developers.com/lg-g5/help/lg-g5-brick-root-t3411389
Get the updated tools here for H860:
http://www.mylgphones.com/download-lg-g5-stock-kdz-tot-firmware-lg-g5-h860.html
Click to expand...
Click to collapse
I already got the the newest version of LG UP. The phone is recognized, but it does not proceed with the upgrade properly.
This is how it was solved:
I believe that the issue was with the LG UP Store version. This is what I did:
1. Installed LG UP LAB v1.1.
2. Installed the H850DLL msi file.
3. Created a folder named C:\Program Files (x86)\LG Electronics\LGUP\model\H860
4. Copied the H850.DLL file from C:\Program Files (x86)\LG Electronics\LGUP\model\H850 to the new folder
5. Renamed the file LGUP_H850.DLL to LGUP_H860.DLL
6. Everything went on smoothly !!
The only error I get now is at startup "current version is not available for user. can't find matched cust for nt-code mcc/mnc subset" which I have not dug into but it does not bother me.
By the way @engineer000, most of the online stores in UAE suck!!
Dr.Alani said:
This is how it was solved:
I believe that the issue was with the LG UP Store version. This is what I did:
1. Installed LG UP LAB v1.1.
2. Installed the H850DLL msi file.
3. Created a folder named C:\Program Files (x86)\LG Electronics\LGUP\model\H860
4. Copied the H850.DLL file from C:\Program Files (x86)\LG Electronics\LGUP\model\H850 to the new folder
5. Renamed the file LGUP_H850.DLL to LGUP_H860.DLL
6. Everything went on smoothly !!
The only error I get now is at startup "current version is not available for user. can't find matched cust for nt-code mcc/mnc subset" which I have not dug into but it does not bother me.
By the way @engineer000, most of the online stores in UAE suck!!
Click to expand...
Click to collapse
Where did you bought yours? I bought from Yallashop.
Where are you seeing that error? As your phone startup? How about using the proper DLL on the guide and flash it again?
it seems to be related to different customizations. i don't know if flashing tW version will stop it. but this stopped me from flashing a AE fw
engineer000 said:
Where did you bought yours? I bought from Yallashop.
Where are you seeing that error? As your phone startup? How about using the proper DLL on the guide and flash it again?
it seems to be related to different customizations. i don't know if flashing tW version will stop it. but this stopped me from flashing a AE fw
Click to expand...
Click to collapse
I got mine from souq.com.
The error shows only at phone startup. Its not causing any other visible problem.
I couldn't get the H860 DLL msi anywhere on the web.
Sent from my LG-H860 using XDA-Developers mobile app
Dr.Alani said:
I got mine from souq.com.
The error shows only at phone startup. Its not causing any other visible problem.
I couldn't get the H860 DLL msi anywhere on the web.
Sent from my LG-H860 using XDA-Developers mobile app
Click to expand...
Click to collapse
Try it here:
Get the updated tools here for H860:
http://www.mylgphones.com/download-l...g-g5-h860.html
engineer000 said:
Try it here:
Get the updated tools here for H860:
http://www.mylgphones.com/download-l...g-g5-h860.html
Click to expand...
Click to collapse
I think the link is broken.
Dr.Alani said:
I think the link is broken.
Click to expand...
Click to collapse
http://www.mylgphones.com/download-lg-g5-stock-kdz-tot-firmware-lg-g5-h860.html
http://www.mylgphones.com/download-lg-flash-files-dll-for-lg-g5.html
sorry it is broken :/
try this:
http://downloads.codefi.re/autoprime/LG/LG_G5/LGFlash/LGH860_20160316_LGFLASHv216.dll
http://downloads.codefi.re/autoprime/LG/LG_G5
Dr.Alani said:
The only error I get now is at startup "current version is not available for user. can't find matched cust for nt-code mcc/mnc subset" which I have not dug into but it does not bother me.
By the way @engineer000, most of the online stores in UAE suck!!
Click to expand...
Click to collapse
You can eliminate the error by reflash the phone with LG bridge (can download officially from LG). In "Software update" tab, there's "Update error recovery" which will automatically download the official firmware for your G5 and of course, the annoying startup error message will go away.
ted presley said:
You can eliminate the error by reflash the phone with LG bridge (can download officially from LG). In "Software update" tab, there's "Update error recovery" which will automatically download the official firmware for your G5 and of course, the annoying startup error message will go away.
Click to expand...
Click to collapse
I am afraid that it might download the software based on the IMEI and then my phone will be back to Taiwan software instead of the AME currently installed.
Sent from my LG-H860 using XDA-Developers mobile app
Can you please write a detailed tutorial of how to flash a kdz on H860 variant? I have the same error and I can't find a way how to solve this. So many informations and nothing works. Thank you very much.
Dr.Alani said:
This is how it was solved:
I believe that the issue was with the LG UP Store version. This is what I did:
1. Installed LG UP LAB v1.1.
2. Installed the H850DLL msi file.
3. Created a folder named C:\Program Files (x86)\LG Electronics\LGUP\model\H860
4. Copied the H850.DLL file from C:\Program Files (x86)\LG Electronics\LGUP\model\H850 to the new folder
5. Renamed the file LGUP_H850.DLL to LGUP_H860.DLL
6. Everything went on smoothly !!
The only error I get now is at startup "current version is not available for user. can't find matched cust for nt-code mcc/mnc subset" which I have not dug into but it does not bother me.
By the way @engineer000, most of the online stores in UAE suck!!
Click to expand...
Click to collapse
After this update is possible to root the H860?
Not working for me
Dr.Alani said:
This is how it was solved:
I believe that the issue was with the LG UP Store version. This is what I did:
1. Installed LG UP LAB v1.1.
2. Installed the H850DLL msi file.
3. Created a folder named C:\Program Files (x86)\LG Electronics\LGUP\model\H860
4. Copied the H850.DLL file from C:\Program Files (x86)\LG Electronics\LGUP\model\H850 to the new folder
5. Renamed the file LGUP_H850.DLL to LGUP_H860.DLL
6. Everything went on smoothly !!
The only error I get now is at startup "current version is not available for user. can't find matched cust for nt-code mcc/mnc subset" which I have not dug into but it does not bother me.
By the way @engineer000, most of the online stores in UAE suck!!
Click to expand...
Click to collapse
I installed required latest drivers.
I did exactly same procedure as mentioned above, but not working for me.
Although it recognizes my device. (attached pic 1).
But when i try to select it gives error. (attached pic 2).
I also followed the procedure in last post by "BaBaK SpY" in following link
http://www.mylgphones.com/download-lg-g5-stock-kdz-tot-firmware-lg-g5-h860.html
But same result as above.
I face the same problem as u did
Dr.Alani said:
Hi everyone,
I am not able to flash a "Middle East" KDZ for H860 over my phone which is H860 but with Taiwan Stock ROM. The phone is new; no rooting, no oem unlock, nothing. The current ROM version is 10e and I want to flash the AME KDZ which is basically 10g.
Using the patched version of LGFlashTool v2.0.1.6, I get an error "(S) Failed to Load". Using LGUP v1.14, the phone is recognized as H860, it restarts into download mode and gets to 9% (which is starting to send the KDZ to phone) and then it give an error msg:
Error: Error Code = 0x81000304
CBasicFlash::_func_LoadGPTF - ErrorCode:8224
I am working on a Windows 10 PC with all the drivers installed and I can access the phone through ADB, Fastboot, LG Bridge, with no issues. The only issue is that I am not able to flash the KDZ although it is for the same model H860.
I have tried a different PC and a re-downloaded the KDZ directly from LG's website. Same issues.
PS: In LGUP, I tried: Refurbish and Upgrade options.
Does anyone have any suggestions?
UPDATE: I tried flashing a Singapore KDZ for H860 as well and it gave the same errors.
Click to expand...
Click to collapse
pLEASE Help me i face the same problem u did . i Tried evry method n facing the same problem :crying::crying::crying::crying:
---------- Post added at 12:13 PM ---------- Previous post was at 11:19 AM ----------
QSR1 said:
I installed required latest drivers.
I did exactly same procedure as mentioned above, but not working for me.
Although it recognizes my device. (attached pic 1).
But when i try to select it gives error. (attached pic 2).
I also followed the procedure in last post by "BaBaK SpY" in following link
http://www.mylgphones.com/download-lg-g5-stock-kdz-tot-firmware-lg-g5-h860.html
But same result as above.
Click to expand...
Click to collapse
my lgup says cannot load my h860 model
. i have h860 and update it with v20a hongkong rom. every thing is good only fast charge disppointing me and take alot of time to charge about 1.30hour to fully charge. i update via lgup and usb .
anybody face to this problem ?
any way or recommend to solve it?
i will attach the graph of battery charge in android 6 and android 7.
slope of line in android 6 battery charge is much higher than 7 .
---------- Post added at 05:02 PM ---------- Previous post was at 04:46 PM ----------
graph of battery charging in android 6 vrs android 7 in my lg h860.
http://s2.picofile.com/file/82827979...7_09_23_58.png
http://s3.picofile.com/file/82827982...6_22_30_00.png
android 7 charging speed very bad and is slow. and its clear in pictures.
why the reason???
Hello everyone, I'm residing in Korea by the moment... my carrier is olleh (KT)... I used to have an LG G pro 2 from the carrier so had no problem at all. recently I switched to a new G5. the problem now it's the model is F700L (from other carrier) and there are some benefits I get with my carrier (KT) that I can't when the phone doesn't match the same carrier ...
I've been reading and researching about changing the rom to the one from the other carrier, and LGUP throws error when saying: Error F700L > F700K ... I know there won't be any problem doing this because the hardware is the same. And as far as I know there's no possible way to root the phone and unlock the bootloader or install a custom one for later on install the other rom from there... :silly::crying::crying: .... so....
after so many days trying got disappointed and annoyed... gotta ask... is there any other way to flash without confirmation? (with Odin or other?... FlashTools doesn't get to communicate with the device in download mode... and LG Flash.. requires a DLL and can't find it anywhere...) ... or getting inside the phone using ssh (i'm linux user) or other with the help of the adb ... and get to edit the model just to change the freaking L by a K??
The other possible way could be editing the actual KDZ to match the info... I've tried WinHex but LGUP says: Invalid KDZ after the edition.... some other way?
will appreciate any idea... thanks!
Need LG-Q710AL FIRMWARE for unbrick phone please cant found
I need it as well a client brought in his stylo 4 will not boot it gets an error "images of verified boot not installed all slots are unbootable" I can only get into download mode. It tries to go to recovery but dies a few seconds beforehand. If I find it I will post a link here.
Please do, I'll do the same!
g0new0rk said:
I need it as well a client brought in his stylo 4 will not boot it gets an error "images of verified boot not installed all slots are unbootable" I can only get into download mode. It tries to go to recovery but dies a few seconds beforehand. If I find it I will post a link here.
Click to expand...
Click to collapse
Hello-Have you had any luck with this yet? I can't even find a boot image to flash with patched lgup, not that I know it would work...I am having the same message.
blodgettmike said:
Hello-Have you had any luck with this yet? I can't even find a boot image to flash with patched lgup, not that I know it would work...I am having the same message.
Click to expand...
Click to collapse
Not yet. I have not been able to dump it with patched LGUP and DLL I have tried DLL from "LMQ710MS" which is a Qualcomm chip, "LMQ710BAW" which is a south America QNote+ but seems to be the same phone on the inside. Also tried "LMQ710FA" a south America Q Stylus Plus seems to be same on the inside. both have the MT6750S
I have gotten it to pretend it dumps the phone. It goes through the motions but open any of the files in hxd and they are either full of 00 00 00 00 or have what looks like GPT repeated info in it. I have not been following LG much and this is just for fun for me. I tried to use the Lg download mode tools in python but cannot seem to get a connection I am guessing since they came out in 2016 LG has switched up their protocol. Seems they encrypted the DLL's as well.
I have tried LG Bridge, LG Mobile Support Tool. The logs show the IMEI check fails. I assume it means it is a sprint/boost phone as I know the IMEI is not blacklisted or stolen. But more of they realize it is a boost/sprint unit and block it. I tried every trick I could find I get as far as it says "downloading software" but it just hangs. I am going to try fresh installs after while just to rule it out. I would like to find out if anyone has used any LG tools to do a firmware update or firmware error recovery on a Sprint or Boost phone that is within 6 months old.
The story I heard is Sprint thinks their OTA updates should fix everything there is no reason to release firmware. I sure hope T-Mobile is buying Sprint. It seems is trying very hard to drive down there sell price... I talked to LG, of course, they cannot do anything until one of there techs puts hands on it. I am thinking of just trading it in it is only 4 months old. I just hate to give up or fail. But there is some type of issue with them I highly doubt the person above and myself are the only ones that have had this issue. I know there is at least 1 more person seen them on Lg forums.
If I make any headway or happen across a fix I will update within this thread.
g0new0rk said:
Not yet. I have not been able to dump it with patched LGUP and DLL I have tried DLL from "LMQ710MS" which is a Qualcomm chip, "LMQ710BAW" which is a south America QNote+ but seems to be the same phone on the inside. Also tried "LMQ710FA" a south America Q Stylus Plus seems to be same on the inside. both have the MT6750S
I have gotten it to pretend it dumps the phone. It goes through the motions but open any of the files in hxd and they are either full of 00 00 00 00 or have what looks like GPT repeated info in it. I have not been following LG much and this is just for fun for me. I tried to use the Lg download mode tools in python but cannot seem to get a connection I am guessing since they came out in 2016 LG has switched up their protocol. Seems they encrypted the DLL's as well.
I have tried LG Bridge, LG Mobile Support Tool. The logs show the IMEI check fails. I assume it means it is a sprint/boost phone as I know the IMEI is not blacklisted or stolen. But more of they realize it is a boost/sprint unit and block it. I tried every trick I could find I get as far as it says "downloading software" but it just hangs. I am going to try fresh installs after while just to rule it out. I would like to find out if anyone has used any LG tools to do a firmware update or firmware error recovery on a Sprint or Boost phone that is within 6 months old.
The story I heard is Sprint thinks their OTA updates should fix everything there is no reason to release firmware. I sure hope T-Mobile is buying Sprint. It seems is trying very hard to drive down there sell price... I talked to LG, of course, they cannot do anything until one of there techs puts hands on it. I am thinking of just trading it in it is only 4 months old. I just hate to give up or fail. But there is some type of issue with them I highly doubt the person above and myself are the only ones that have had this issue. I know there is at least 1 more person seen them on Lg forums.
If I make any headway or happen across a fix I will update within this thread.
Click to expand...
Click to collapse
Thanks for the update, very much appreciated!
blodgettmike said:
Thanks for the update, very much appreciated!
Click to expand...
Click to collapse
Check your "private messages" .
I had the same problem. I just bought a new one from Walmart and returned the busted phone in its stead. Not exactly on the up-and-up, but boost will eat that cost. Is there a way I can extract the KDZ from my phone now? It's the same phone, just with all the bootable slots!
g0new0rk said:
Not yet. I have not been able to dump it with patched LGUP and DLL I have tried DLL from "LMQ710MS" which is a Qualcomm chip, "LMQ710BAW" which is a south America QNote+ but seems to be the same phone on the inside. Also tried "LMQ710FA" a south America Q Stylus Plus seems to be same on the inside. both have the MT6750S
I have gotten it to pretend it dumps the phone. It goes through the motions but open any of the files in hxd and they are either full of 00 00 00 00 or have what looks like GPT repeated info in it. I have not been following LG much and this is just for fun for me. I tried to use the Lg download mode tools in python but cannot seem to get a connection I am guessing since they came out in 2016 LG has switched up their protocol. Seems they encrypted the DLL's as well.
I have tried LG Bridge, LG Mobile Support Tool. The logs show the IMEI check fails. I assume it means it is a sprint/boost phone as I know the IMEI is not blacklisted or stolen. But more of they realize it is a boost/sprint unit and block it. I tried every trick I could find I get as far as it says "downloading software" but it just hangs. I am going to try fresh installs after while just to rule it out. I would like to find out if anyone has used any LG tools to do a firmware update or firmware error recovery on a Sprint or Boost phone that is within 6 months old.
The story I heard is Sprint thinks their OTA updates should fix everything there is no reason to release firmware. I sure hope T-Mobile is buying Sprint. It seems is trying very hard to drive down there sell price... I talked to LG, of course, they cannot do anything until one of there techs puts hands on it. I am thinking of just trading it in it is only 4 months old. I just hate to give up or fail. But there is some type of issue with them I highly doubt the person above and myself are the only ones that have had this issue. I know there is at least 1 more person seen them on Lg forums.
If I make any headway or happen across a fix I will update within this thread.
Click to expand...
Click to collapse
thank a lot for the update.
Cross firmware
same problem
Cross firmware success
I croossed firmware with several q stylo Alpha , the problem id no baseband, wifi dont work, using lgup modded 1.14 option partición dll
djcal1985 said:
I croossed firmware with several q stylo Alpha , the problem id no baseband, wifi dont work, using lgup modded 1.14 option partición dll
Click to expand...
Click to collapse
Update
working 2G and H+ an data,
no working
3g,LTE
WIFI and bluetooth
need help for edit nvdata, dont know parameters for lte
the solution you have to get dump system from lgup DUMP option and edit like system.img and flash on la option -partition dl
djcal1985 said:
I Cross firmware with lgup modded but you Lost baseband , wifi and bluetooth nota working
Click to expand...
Click to collapse
I tried to , but it give me some kind of error like 0X.... succes cmd sign
the phone q710al q710pl got root, please upload backup from system please
bump
does any one fixed no data/4g/Lte issue ? i have phone with no data / apn issues.
djcal1985 said:
I croossed firmware with several q stylo Alpha , the problem id no baseband, wifi dont work, using lgup modded 1.14 option partición dll
Click to expand...
Click to collapse
i try to crossed firmware on my q710al with q710hs Q stylo Alpha ... but now my phone turn on/off .
no firmware for Q710al to fix this ... can anyone suggest me Q710Hs firmware which fix this issue ?
I can get y'all the dump file but I need a patched version of LGUP DEV to do it. All other versions give a timed out error.
Jackspsychosis said:
I can get y'all the dump file but I need a patched version of LGUP DEV to do it. All other versions give a timed out error.
Click to expand...
Click to collapse
hi! i found this on hovatek. pls do try it
waayo69 said:
hi! i found this on hovatek. pls do try it
Click to expand...
Click to collapse
Right on. I try here in a bit. Since my post I've been trying patch LGUP myself. The only is that lack knowledge or brain cells. Its difficult to say the least. The eggheads that know how to do it are not very forthcoming.
LG V10 H90121j bricked after update which was successfully completed but phone does not turned on after that. I manage to unbrick through H90020w qfil and get access to update firmware screen. Now again every H901 kdz updated 100% but phone again bricks and not turning on. Please help me to restore my phone. I think I should unbrick with H901 qfil instead of H90020w. Please support.
Shan1122 said:
LG V10 H90121j bricked after update which was successfully completed but phone does not turned on after that. I manage to unbrick through H90020w qfil and get access to update firmware screen. Now again every H901 kdz updated 100% but phone again bricks and not turning on. Please help me to restore my phone. I think I should unbrick with H901 qfil instead of H90020w. Please support.
Click to expand...
Click to collapse
Dear shan, sould have read these forums before updating, I had the same misfortune when i updated my v10 through LG bridge, chances are you have a refurbished phone like me, where the motherboard is of a different version/country/carrier than the software, I have a korean f600l which i came to know after bricking my phone, the only ,method to revive it is to use the h90020w method but it will convert your tmobile to AT&t with fingerprint , vpn issues, unable to uninstall apps and in extreme cases like mine no radio, but atleast it works that fine for me, but if you want to make calls then dont go for it, first identify your board then ask for help from other senior members ,or others who have the same model . andn please do update if you are successful so that others may benefit from your method.
last gspian said:
Dear shan, sould have read these forums before updating, I had the same misfortune when i updated my v10 through LG bridge, chances are you have a refurbished phone like me, where the motherboard is of a different version/country/carrier than the software, I have a korean f600l which i came to know after bricking my phone, the only ,method to revive it is to use the h90020w method but it will convert your tmobile to AT&t with fingerprint , vpn issues, unable to uninstall apps and in extreme cases like mine no radio, but atleast it works that fine for me, but if you want to make calls then dont go for it, first identify your board then ask for help from other senior members ,or others who have the same model . andn please do update if you are successful so that others may benefit from your method.
Click to expand...
Click to collapse
hey, sorry for late reply. Thank you for your answer. I got solution but as you said, with no Radio, I cannot make calls. my imei shows only 0-17. I think my imei totally erased. my methode was to debrick with file H90021w and then flash with H90021w.dz file. I convert kdz file to dz file by using LG_Firmware_Extract_v1.2.6.1. these files are available on internet. I got my phone back to life but without network. Phone is booting with AT&T logo and working fine other then network issue.
can anyone help me with network issue now?
I had a ntt docomo v60, then i flashed a eu rom and my imei is null, serial gone, unknown baseband, and many problems, network not working says permantly blocked. Solution will be much helpful i can pay if all gets working. Waiting for reply. Help from devs needed.
Can you tell me how you updated it to eu rom?
I know it's impossible without Medusa. Could you tell me if there is any other way?
Cover the modem extract from the docomo genuine modem file QPST that fits the Android version
As far as I know, softbank a001lg has experienced the same network problem after cross-flashing. As far as I know, it was solved by putting a pure modem in QPST.
I updated using lgup. I dont have other rom but i have asked a friend who was lg v60 with working network for backup. Will it work ?? I need options. But i am not able to use qfil also as it doesnt show anything.
lg up, are you done? Can you tell me what the article you mentioned?
andamiro00 said:
lg up, are you done? Can you tell me what the article you mentioned ?
Click to expand...
Click to collapse
Need a lg v60 rom. I exactly need my phone in working condition, what shall i query ?
your imei is gone, no network anymore, no fix method in the current.
about kdz rom you want, you can easy find " V60 Tmobile kdz download" in google search.
dangtoi1993 said:
your imei is gone, no network anymore, no fix method in the current.
about kdz rom you want, you can easy find " V60 Tmobile kdz download" in google search.
Click to expand...
Click to collapse
Cant any efs backup workout ?
tusharj2003 said:
Cant any efs backup workout ?
Click to expand...
Click to collapse
no work,
you can findout many thread in this V60 section about imei, qcn, efs, modemst,...etc..
tusharj2003 said:
Need a lg v60 rom. I exactly need my phone in working condition, what shall i query ?
Click to expand...
Click to collapse
QFIL backs up modem_a, modem_b on genuine docomolg v60
Cover your device with modem_a, modem_b If the hidden menu - SVC - MIN informatin has an IMPL of 0, the imei cereal may be modified.
Another way is to find a way to modify the imi, s/n in FTM in QFIL
Please help me if you can help me.
I understood that it was cross-flashed with LG UP.
I also tried cross-flashing Japanese printing equipment, but it failed. The softbank device has no more updates, so I'm going to cross-flash with T-Mobile.
If you referred to any article, please link it.
andamiro00 said:
QFIL backs up modem_a, modem_b on genuine docomolg v60
Cover your device with modem_a, modem_b If the hidden menu - SVC - MIN informatin has an IMPL of 0, the imei cereal may be modified.
Another way is to find a way to modify the imi, s/n in FTM in QFIL
Please help me if you can help me.
I understood that it was cross-flashed with LG UP.
I also tried cross-flashing Japanese printing equipment, but it failed. The softbank device has no more updates, so I'm going to cross-flash with T-Mobile.
If you referred to any article, please link it.
Click to expand...
Click to collapse
How to Flash Stock Firmware on LG Smartphone ? - LG-Firmwares.com
Tutorial how to flashing LG device. Change or update Firmware on LG phones.
lg-firmwares.com
I done from this and also post from xda.
andamiro00 said:
QFIL backs up modem_a, modem_b on genuine docomolg v60
Cover your device with modem_a, modem_b If the hidden menu - SVC - MIN informatin has an IMPL of 0, the imei cereal may be modified.
Another way is to find a way to modify the imi, s/n in FTM in QFIL
Please help me if you can help me.
I understood that it was cross-flashed with LG UP.
I also tried cross-flashing Japanese printing equipment, but it failed. The softbank device has no more updates, so I'm going to cross-flash with T-Mobile.
If you referred to any article, please link it.
Click to expand...
Click to collapse
Hi I have a v60 l-51a docomo variant
Did you successfully crossflashed
I want to enable volte
Please help me as well