Related
So i have a stock sprint note 3 that had 4.4.4 on it.
I attempted to install twrp/cwm through odin, but it failed and now i'm stuck in the failed firmware update loop.
I have tried installing older versions of the stock firmware, seems like i'm stuck looking for a 4.4.4 which seems kinda hard to find right now.
What are my other options, my friend is looking for the serial numbers to see if i can just use keis to recover.
k0ncept said:
So i have a stock sprint note 3 that had 4.4.4 on it.
I attempted to install twrp/cwm through odin, but it failed and now i'm stuck in the failed firmware update loop.
I have tried installing older versions of the stock firmware, seems like i'm stuck looking for a 4.4.4 which seems kinda hard to find right now.
What are my other options, my friend is looking for the serial numbers to see if i can just use keis to recover.
Click to expand...
Click to collapse
Although your thread will probably be moved to the Q&A section, you stated you are able to install older versions...... take it back into DL mode and Odin 4.4.4. There are several threads you can download the NK4 Firmware from including the Sammobile site.
SM-N900P Spint (cdma) 2014 December 4.4.4 N900PVPUDNK4 N900PSPTDNK4
shadowcliffs Thread in the General Section
.
k0ncept said:
So i have a stock sprint note 3 that had 4.4.4 on it.
I attempted to install twrp/cwm through odin, but it failed and now i'm stuck in the failed firmware update loop.
I have tried installing older versions of the stock firmware, seems like i'm stuck looking for a 4.4.4 which seems kinda hard to find right now.
What are my other options, my friend is looking for the serial numbers to see if i can just use keis to recover.
Click to expand...
Click to collapse
Honestly it sounds like you're making this more difficult than it really is.
All you need is;
NK4 .tar
SU
&
TWRP
So i'm fairly new to this the last phone i did was my vz s4 (and it went off with less bumps).
I'm stuck in the boot load loop. I can't flash any ROM on it right now, i think i'm trying to find the right 4.4.4 rom. Any place with good rom support would help. sammobile is far too slow on downloads...also there are a few 4.4.4 roms by now.
So the phone was purchased in early Nov 2014, already on a 4.4.4.
I dl'd odin and a TWRP, foolishly didn't make sure 4.4.4 could be flashed in the same way. Odin marked it as failed and when i re-start the phone it runs into the "Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again"
The phone can get into download mode just fine (cannot boot)...tho i have no idea what to flash onto it now.
k0ncept said:
So the phone was purchased in early Nov 2014, already on a 4.4.4.
I dl'd odin and a TWRP, foolishly didn't make sure 4.4.4 could be flashed in the same way. Odin marked it as failed and when i re-start the phone it runs into the "Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again"
The phone can get into download mode just fine (cannot boot)...tho i have no idea what to flash onto it now.
Click to expand...
Click to collapse
As Nickitt stated, don't make it more than it is. If you can get into DL mode then you are not fully bricked which is good. You need to flash an " Official 4.4.4 Firmware " to get you out of this situation, whether it be a slow download or not. I provided a link in my original first response of several uploads of 4.4.4 that you could possibly use that were uploaded by member shadowcliffs in his same thread/post. After you have flashed the official firmware and gone through the initial setup once again with the stock firmware, get the phone back into DL Mode and flash TWRP or Philz CWM recovery via ODIN. Once you have your custom recovery loaded, flash the Custom Rom of your choice.
Hey dark,
thanks for the quick and very very useful response. i wish i hit this up way sooner i did find those links after hours of searching through garbage. i've been downloading a few 4.4.4 images for the last 2hours. Hopefully this will help me! sadly those are the same slow connections i've scene. damn 50kb/sec so sad haha
I'll keep the board posted. but mostly bump that og thread
Damn, fails on the nk4 image and the nh7.
fails on the same spot system.img.ext4
any other suggestions board? please?
make sure your using the hltespr version of either TWRP or philz recovery, if its not working on TWRP switch to philiz. Could also be a bad download - re-download and flash again
Why don't you just use TWRP Manager to install TWRP after you root?
Sent from my GALAXY Note 3 via Tapatalk
not being able to root was the problem
FIXED my issues!!
Never use vmware and Mac to run heimdall or Odin... They should more prominently tell you that.
Thank you board for the concern
problem solved
Thanks for updating that you fixed the problem and what it was. It sounded like you were doing everything correctly. i was getting concerned that it wasn't working. I don't use mac, but if i did i would have been very grateful for that knowledge. thanks for the update. too often someone fixes the problem and just quits posting on the thread.:good:
k0ncept said:
FIXED my issues!!
Never use vmware and Mac to run heimdall or Odin... They should more prominently tell you that.
Thank you board for the concern
Click to expand...
Click to collapse
Parallels is a better option imo as far as v-machines are concerned but anything after Mountain lion doesn't work well. The newest mac osx doesn't work at all with Heimdall. It won't download the pit file. If your running mavricks you can try using a program called winebottle
How to Run Odin On Mac: http://youtu.be/j7fpouzMSsk also jOdin is another desktop tool to use. jOdin is a early stage online flashing tool with limited capabilities at this time.Beings its a online flashing tool. I would make sure to have a good internet connection or you could run into trouble im guessing. All in all I think its a good idea I just hope this project keeps going.
JOdin - Using Odin on a Mac: http://youtu.be/MiPRXq207Ug
It's only right jag.
Goat, thanks for the additional information. I hope there are improved options for the mac and Linux one day
k0ncept said:
It's only right jag.
Goat, thanks for the additional information. I hope there are improved options for the mac and Linux one day
Click to expand...
Click to collapse
Me too bro, me too!
(FlashKDZ/Root/Recovery/Hiddenmenu/troubleshooting) (noob2noob guide)
Okay, this is my first thread on XDA, the reason I'm making it is there is a lots of problems with progressing to lollipop. All of this is already mentioned in the forum, but this way it is much easier since it is all at one place. If I'm doing something wrong please warn me with explanation how to resolve the issue. If I'm posting in wrong forum section please move my thread where it is supposed to be.
1. Before doing anything check if your phone is ready to get updated:
1.1 Do you have a stock Kitkat rom or at least a rom that is kitkat based, since there can be a problem with partitioning if custom lollipop rom is installed
1.2 Create a backup. Don't be lazy LG backups will not help you since they can't go from kitkat to lollipop, don't try to do it from recovery because you will lose custom recovery. Copy your files from phone including extracted contacts, and back it up online with google or some other backup providers.
1.3 Check if you have a latest touch firmware, because you might have a problems after installing lollipop and it will be hard for you to check for updates since your touch might become useless.
1.3.1 To check it go to hidden service menu by typing 3845#*802# and go under HW Device Test, then Touch Test then touch firmware version and write everything down. After that go to touch firmware upgrade and after 15 seconds compare the touch firmware version values with those you written down.
1.4 In hidden Menu you can also go to wlan test then ota setting to check if it is disabled on your phone. After that check again if there is OTA updates for your phone, and also check if there is PC suite Update.
1.5 Check your phones version if it is D802, D800 or something else, and check which rom you have installed. You can do this in settings about phone or if you are happy about hidden menu found, go there and into settings then version info. This might not be interesting or fun to do, but it will save you the trouble if something goes wrong, because you will know what to ask.
1.6 Last but not the least, before starting to flash fill up your battery, i've read some posts that say there are problems with wrong capacity shown, and a lots of battery drain problems, and only solution till now is to have a full battery on start.
2. You will need LG FlashTool and of course installed drivers for your G2 on your PC.
All of that you can get in the thread by @quangnhut123 .
2.1 Just a bit of precautions, don't forget to always copy a kdz file in to Flashtool folder and then start a tool. All should look the same as in that thread, except you should always use CSE method because with this method you will install kdz from scratch, removing everything from the phone.
2.2 You should find the kdz file which suits for your phone on site . You can check for kdz by typing in imei in check new firmware section or find the one for yourself by searching the site. v30a is lollipop open while v30d is for branded G2's.
(I've read that this site is not allowed by Xda moderators, so if I can't post it please give me info on where should we download kdz's from).
2.3 I think it's all pure logic now but lets say it one more time. You have downloaded kdz file, and put it inside LG Flashtool folder. You should now start Flashtool and get your phone into Download mode. To do this you need to hold volume up button on turned off device and connect usb cable while holding volume up. Now just cse flash.
2/3 This is troubleshooting step, if you have a problem ask and i hope this great community will help you like they did to me, and ofc I will do my best to help.
3. Now we go to rooting.
Here is the thread by @avicohh which worked for my D802.
Just follow his step by step tut and you will have a rooted phone
3.1 The only issue that might happen here is you are stuck with # and adb waiting for your phone. To resolve this just go into download mode manually.
4. Okay rooting done, now let's go to custom recovery install
It's easy as installing an app from google play by @bender_007
4.1 After installing it open the app and follow the on-screen instructions. If it fails for the first time, try it few more times, it will eventually work. (OFC. I didn't install it with only one try).
4.2 To get into custom recovery hold volume down and power button till first LG sign shows up, then release both buttons and quickly press them again. It will ask you do you want to do factory reset, press yes and yes again, and it will get you to custom recovery if you installed it.
4.2.1 If you factory reset your phone that means you didn't install recovery correctly and you will lose your data, but again that should be no problem since you have that backup from the start.
Now optional steps:
5. Install system app remover to remove bloatware from your phone. You can do it manually but this way you will have those apps backed up.
6. Next suggestion is to install a few mods if you need them. In my case I had to have a Plug and pop, since it is lost from Lollipop and I loved that feature. Here is a thread on how to install that mod by @p_a_r_s_a7
//That's all, if you have any questions feel free to ask, since there is no dumb questions, but also try to read carefully before//
Thanks to:
@quangnhut123
@avicohh
@p_a_r_s_a7
@bender_007
A lot of others whose names i can't remember. If anyone else needs to be mentioned PM me and i will add you in this section.
I will add pictures and stuff if needed
Thanks, good all-in-one thread, + easiest methods. Ill recommend it‚to others
This forum is such a mess that a thread like this is like a fresh breath of air. Every advice given on other threads references something that you should already know how it's done, or you should already have done to your phone in the past and have a certain version of it, or non-working tools that are only around for a few months until an update makes them unusable.
No wonder that most of the first-page topics, including pinned ones, have the word "brick" in the title. This should signal the forum moderators that something is wrong around here.
My phone is stock international sim-free G2, never rooted or otherwise modified and yet no one was able to offer a coherent solution of how to update to Lollipop, until your post.
So, thanks for this thread.
Thank you, that is exactly why i made the thread. Every one of those threads has everything explained, but you need to search theough 150 pages to understand how something is done. That's why i wanted to make a thread with all explanations made in a single post and to make it noob friendly since the worst thing that happens in other threads is answer like use a search you have it somewhere.
Hi,
Thanks for the thread. It really helps noobs like me, but I still have a couple of questions...
I was running Paranoid Android L rom with root, twrp and kk bootloader on My D802.
I didn't see this thread before I decided to downgrade back to 4.2.2 stock rom, and now I don't really know what steps to take.(I have kernel version 3..4.0 and build number JDQ39B)
I haven't seen an OTA available, so I was thinking of flashing new Lollipop rom kdz file. But I've been seeing stuff about using LG PC suite to upgrade via OTA so i wasn't sure.
So my main question is that do I do an OTA upgrade on my current 4.2.2 stock rom or do I download an official Lollipop rom? Can you give me a brief idea of the steps to take?
Thanks
seyio said:
Hi,
Thanks for the thread. It really helps noobs like me, but I still have a couple of questions...
I was running Paranoid Android L rom with root, twrp and kk bootloader on My D802.
I didn't see this thread before I decided to downgrade back to 4.2.2 stock rom, and now I don't really know what steps to take.(I have kernel version 3..4.0 and build number JDQ39B)
I haven't seen an OTA available, so I was thinking of flashing new Lollipop rom kdz file. But I've been seeing stuff about using LG PC suite to upgrade via OTA so i wasn't sure.
So my main question is that do I do an OTA upgrade on my current 4.2.2 stock rom or do I download an official Lollipop rom? Can you give me a brief idea of the steps to take?
Thanks
Click to expand...
Click to collapse
Updating through pc suite or ota is the best way if it is available to you. Flashing kdz is the same thing but that is doing it manually while through pc auite nad ota is pretty much automatic. Anyways which ever way you decide to use be sure to fully charge your battery and factory reset acter the update. If you need anything else feel free to ask
[email protected]$o said:
Updating through pc suite or ota is the best way if it is available to you. Flashing kdz is the same thing but that is doing it manually while through pc auite nad ota is pretty much automatic. Anyways which ever way you decide to use be sure to fully charge your battery and factory reset acter the update. If you need anything else feel free to ask
Click to expand...
Click to collapse
Do I flash KK bootloader or root before I update through ota?
seyio said:
Do I flash KK bootloader or root before I update through ota?
Click to expand...
Click to collapse
No need to flash bootloader if you didnt flash it for paranoid android. And definitely no need to root since you can root after update.
Problems with flashing KDZ
I have downloaded Spain Lolipop KDZ file for LG G2 D802.
Have backed up everything usint TWRP> ( Presently on Optimus G3 rom v 1.4.1 with dorimanx kernel and TWRP )
I have copied the KDZ file to the flash tool. When i use CSE flash .. it takes me to the next page .. in which I click on Start which then opens up the LG Mobile support tool.
Then it shows detecting ur phone .. unpacking or extracting file .. after that shows software updating .. reaches 2 % and then shows error .. asks me to retry .
Do you know what I am doing wrong ? or the cause of this prob ?
http://i58.tinypic.com/15rk2eo.png
sankeerth24 said:
I have downloaded Spain Lolipop KDZ file for LG G2 D802.
Have backed up everything usint TWRP> ( Presently on Optimus G3 rom v 1.4.1 with dorimanx kernel and TWRP )
I have copied the KDZ file to the flash tool. When i use CSE flash .. it takes me to the next page .. in which I click on Start which then opens up the LG Mobile support tool.
Then it shows detecting ur phone .. unpacking or extracting file .. after that shows software updating .. reaches 2 % and then shows error .. asks me to retry .
Do you know what I am doing wrong ? or the cause of this prob ?
http://i58.tinypic.com/15rk2eo.png
Click to expand...
Click to collapse
Had the same problem when flashing kitkat kdz. Are you sure that you have pasted kdzfile inside flashtool. If that is not the problem try other kdz. That helped me
Where are you from and more specifically whhere your phone is from so i can maybe help you with finding right kdz. And btw i think you might have a problem when trying to restore that backup so if you still can backup your phone manually or on the cloud.
[email protected]$o said:
Had the same problem when flashing kitkat kdz. Are you sure that you have pasted kdzfile inside flashtool. If that is not the problem try other kdz. That helped me
Where are you from and more specifically whhere your phone is from so i can maybe help you with finding right kdz. And btw i think you might have a problem when trying to restore that backup so if you still can backup your phone manually or on the cloud.
Click to expand...
Click to collapse
I have restored the complete back up using TWRP .... Yes i have already pasted kdz in the same folder of flash tool...still no change .. now downloading D802 20H firmware to flash stock n den again try KDZ
I have seen that some guys who had the same problem resolved it with disconnecting from network
Sent from my LG-D802 using XDA Free mobile app
sankeerth24 said:
I have restored the complete back up using TWRP .... Yes i have already pasted kdz in the same folder of flash tool...still no change .. now downloading D802 20H firmware to flash stock n den again try KDZ
Click to expand...
Click to collapse
http://www.1x1a.com/fixlg-flash-tool-stuck-at-2.html
Or maybe try this. I havent tried it so i cant promise anything but if you want you can try. Hope it helps
[email protected]$o said:
No need to flash bootloader if you didnt flash it for paranoid android. And definitely no need to root since you can root after update.
Click to expand...
Click to collapse
Hi again..
OTA update to Lollipop has failed on my D802, LG PC Suite only upgraded me from Android 4.2.2 to 4.4.2, so can anyone help me out here?
Am I missing something for OTA update? If not, then which lollipop kdz can I download for my phone so that I can flash? I live in UK and i use a 3 UK sim if that helps
but also, In the process of trying to boot into my previously installed TWRP recovery, I discovered that i have been restored to stock recovery. I have rooted the phone, but just wanted to clarify: I flash custom recovery, then bootloader/kernel then lollipop kdz?
Thanks again
seyio said:
Hi again..
OTA update to Lollipop has failed on my D802, LG PC Suite only upgraded me from Android 4.2.2 to 4.4.2, so can anyone help me out here?
Am I missing something for OTA update? If not, then which lollipop kdz can I download for my phone so that I can flash? I live in UK and i use a 3 UK sim if that helps
but also, In the process of trying to boot into my previously installed TWRP recovery, I discovered that i have been restored to stock recovery. I have rooted the phone, but just wanted to clarify: I flash custom recovery, then bootloader/kernel then lollipop kdz?
Thanks again
Click to expand...
Click to collapse
I am not sure but i think that update for the uk didnt come out yet. so you can't update to lollipop yet via pc suite or ota. and you got it all wrong. first you flash lollipop kdz but you will have to try out few of them since official for uk didn't come out yet, after that you root, and then flash custom recovery.
and as previously you will be back to stock recovery after update. you have it all explained step by step in first post. i know it is a bit long but that is the best way, since i didn't want to write stuff like "you should know that" and so on. so just follow the first post and you will be happy, or wait for official uk update over the ota you will be happy too, and i guess it should come out in a month.
[email protected]$o said:
I am not sure but i think that update for the uk didnt come out yet. so you can't update to lollipop yet via pc suite or ota. and you got it all wrong. first you flash lollipop kdz but you will have to try out few of them since official for uk didn't come out yet, after that you root, and then flash custom recovery.
and as previously you will be back to stock recovery after update. you have it all explained step by step in first post. i know it is a bit long but that is the best way, since i didn't want to write stuff like "you should know that" and so on. so just follow the first post and you will be happy, or wait for official uk update over the ota you will be happy too, and i guess it should come out in a month.
Click to expand...
Click to collapse
Thanks for the quick reply.
I'll download all the lollipop kdz's and see which one of them works for me till the UK one comes out then I'll just do a normal flash over it.
But seriously, one month for the UK ota :crying: Right now, I don't even know which is worse: Google that takes forever to release updates with so many bugs, or Apple who generally release better stable updates but make older devices laggy...
Thanks again for all the help.
seyio said:
Thanks for the quick reply.
I'll download all the lollipop kdz's and see which one of them works for me till the UK one comes out then I'll just do a normal flash over it.
But seriously, one month for the UK ota :crying: Right now, I don't even know which is worse: Google that takes forever to release updates with so many bugs, or Apple who generally release better stable updates but make older devices laggy...
Thanks again for all the help.
Click to expand...
Click to collapse
its a good update, not that buggy, and be sure to fully charge your battery before the process. you should try europe open or something like that, but there is no german or uk release yet and some guys suspect it is slowed down because they found out bugs in other versions
After CSE Flashing my d802 with a 30a, it got stock on lg logo screen, then an android screen with "erasing" on bottom, then lg screen. I let it sit for 4 hrs but nothing happened. Im back to stock kitkat atm. A little help please.
fernievidal said:
After CSE Flashing my d802 with a 30a, it got stock on lg logo screen, then an android screen with "erasing" on bottom, then lg screen. I let it sit for 4 hrs but nothing happened. Im back to stock kitkat atm. A little help please.
Click to expand...
Click to collapse
Where from is your phone? Are you sure you flashed right kdz? Did lollipop even turn off? DidCSE flashing finished sucessfully? I would like to help you, but i cant if you dont explainme what is your problem. I am not some pro who faced every error on every phoneso please explain a bit more
And i suppose that erasing screen could have been factory reset on stock recovery
[email protected]$o said:
Where from is your phone? Are you sure you flashed right kdz? Did lollipop even turn off? DidCSE flashing finished sucessfully? I would like to help you, but i cant if you dont explainme what is your problem. I am not some pro who faced every error on every phoneso please explain a bit more
And i suppose that erasing screen could have been factory reset on stock recovery
Click to expand...
Click to collapse
I believe mine is an international version. Where it came from, well, I'm from the Philippines and I got my phone from a local telecom, Globe.
The flash tool said that it was successfully upgraded, but judging from the phone's behavior I think there's something wrong. My phone never started successfully, and I got stuck in the LG logo.
Hi guys...quick question. I have a Huawei P8 that "used" to have Marshmallow Beta Rom installed. Long story short. Since there was no root I tried to revert back to stock with fastboot. Problem is when I tried to flash the B200 stock rom it got stuck on the last "sending" file for about half an hour (which normally takes about 3 minutes for full rom flash). Thought that I just unplug and try to reflash rom again(big mistake it seems but my last 2 phones were nexuses so I thought that it's impossible to actually brick your phone). Anyway...now I'm stuck on a bootloop with no way of entering recovery or the bootloader or fastboot, or anything else for that matter. The Vol+ - and Power combinations don't seem to be working. Any help would be greatly appreciated. Thanks
Check this thread:
http://forum.xda-developers.com/showthread.php?t=3260704
You will find a fix
30adi said:
Check this thread:
http://forum.xda-developers.com/showthread.php?t=3260704
You will find a fix
Click to expand...
Click to collapse
Yeah...already tried that. Eventually this morning, after countless tries I managed to flash the first firmware for our P8 which is a beta B030 version. Now technically the phone works..but I no longer have audio and device isn't getting recognised by the PC (though Fastboot works fine), therefore it must be a software issue. An hour ago I managed to flash B170 and even B200 but the audio issue and usb connection issue is still there. Kinda running on fumes here. Anyone has any other ideea if I should flash anything else. Mind you...I can only update via fastboot...Normal update methods do not work. Thanks
If you had marshmallow beta rom, there is a downgrade package. Have you used it? It's version B300
30adi said:
If you had marshmallow beta rom, there is a downgrade package. Have you used it? It's version B300
Click to expand...
Click to collapse
No...haven't used it. Got a link by any chance? I did a google search but the links were all dead. Thanks
UPDATE: Ok....found it...but I'm gonna need to extract it since local update isn't working. Will update. Bottom line...I messed up because I didn't do the research before trying to rollback to B200. Stupid me
You should go back to marshmallow and do a proper downgrade: B313 -> B300 -> B200
Check the thread, you have to downgrade via 3 button combination for B300, and 2 button combination for B200
B300 is the only proper downgrade package
Good luck!
30adi said:
If you had marshmallow beta rom, there is a downgrade package. Have you used it? It's version B300
Click to expand...
Click to collapse
Man...you're a life saver. That was totally it. Everything back in order now.. Hai sa traiesti
Doamne ajuta!!! Well done
YOU CAN FIND THE FULL G930AUCU8CSA3 FIRMWARE HERE:
https://forum.xda-developers.com/att-galaxy-s7/how-to/g930a-oreo-8-0-stock-att-odin-files-t3869871
G930AUCU4CRE4 to G930AUCS4CRG5:
Download link: https://drive.google.com/file/d/1MoJ0be2exLMoji2ZURR6tbEiHCqWSszG/view
G930AUCS4CRG5 to G930AUCU4CRI2:
Download link: https://drive.google.com/file/d/1Fdrcy4m49Qtl-__dUE0Etuqmyn8UhYbe/view
G930AUCU4CRI2 to G930AUCS8CRJ2
Download link: https://drive.google.com/file/d/1bhVx5Rt_CTXmG5YQrY5azS10RO3lWj1r/view
G930AUCS8CRJ2 to G930AUCS8CRK1
Download link: https://drive.google.com/file/d/1lepPXVZIiZM4i_VMOUOvDvVHvGY4ifwv/view
G930AUCS8CRK1 to G930AUCS8CRL1
Download link: https://drive.google.com/file/d/1CUJOVWnDsk3LL378vxLO0vp8y3AdQjmr/view
If i helped you don't forget to hit thanks button
G930aucu4cri2
friend you have the security patch of August 1 the new update its version is G930AUCU4CRI2 weighs between 456MB or 472MB
Juliowwwe said:
friend you have the security patch of August 1 the new update its version is G930AUCU4CRI2 weighs between 456MB or 472MB
Click to expand...
Click to collapse
Link is UP
thank you very much
thank you very much
New October update is UP
Hello,
How to install these updates ?
I've succeed to install the 8.0 update with ODIN and with 4 files : AP & BL & CP & CSC.
But here there is no such files into the updates you uploaded.
lahlah said:
Hello,
How to install these updates ?
I've succeed to install the 8.0 update with ODIN and with 4 files : AP & BL & CP & CSC.
But here there is no such files into the updates you uploaded.
Click to expand...
Click to collapse
1.) Turn off the phone. Hold down Volume Up + Home + Power until you see a little Android guy. It will say Applying System Update or something like that possibly, and just let it do it's thing until a menu comes up.
2.) Select "Apply update from ADB". You can scroll using the volume buttons and select using the power button.
3.) Make sure you have ADB and the proper drivers installed on your PC:
http://dl.adbdriver.com/upload/adbdriver.zip
4.)Put the firmware in the ADB folder. You can rename it to anything easy to remember like "FIRMWARE".
5.) In the ADB folder, hold SHIFT + right mouse click and choose "Open command window here". Then type the command "adb sideload FIRMWARE" (where FIRMWARE is how you named your file).
6.) Wait patiently.
7.) The phone will reboot and will hang at AT&T logo. This can take another 10 minutes, just wait until it's done
Ok, so I'm a novice at best on flashing with Odin... just flashed my AT&T S7 for the second time today, loading the SM-G930U version of Oreo (G930UUEU8CRJ2).
My understanding is that the 8 in the firmware version (G930UUEU8CRJ2) indicates that it is bootloader v. 8. I also understand that once you update the bootloader, it is impossible to downgrade it... So when I realized I couldnt enable Wifi calling on SM-G930U firmwares I thought I would flash back to the AT&T firmware, and then debloat it to improve the performance. But i cant find an SM-G930A Oreo Rom with BL v. 8.
I thought this one might be, but the 3 files seem to be independant of each other, and the 3rd file that lloked like it might be BL8, is less than 50MB...
So Im hoping you can provide some guidance, and im hoping i didnt shoot myself in the foot with this SM-G930U firmware.
Thank you
Sam
samhnky said:
Ok, so I'm a novice at best on flashing with Odin... just flashed my AT&T S7 for the second time today, loading the SM-G930U version of Oreo (G930UUEU8CRJ2).
My understanding is that the 8 in the firmware version (G930UUEU8CRJ2) indicates that it is bootloader v. 8. I also understand that once you update the bootloader, it is impossible to downgrade it... So when I realized I couldnt enable Wifi calling on SM-G930U firmwares I thought I would flash back to the AT&T firmware, and then debloat it to improve the performance. But i cant find an SM-G930A Oreo Rom with BL v. 8.
I thought this one might be, but the 3 files seem to be independant of each other, and the 3rd file that lloked like it might be BL8, is less than 50MB...
So Im hoping you can provide some guidance, and im hoping i didnt shoot myself in the foot with this SM-G930U firmware.
Thank you
Sam
Click to expand...
Click to collapse
The bootloader binary was updated to 8. After you flash this you'll be stuck on Oreo.
Full firmware for G930A G930AUCS8CRJ2 will be uploaded later today.
stek-kravari said:
The bootloader binary was updated to 8. After you flash this you'll be stuck on Oreo.
Full firmware for G930A G930AUCS8CRJ2 will be uploaded later today.
Click to expand...
Click to collapse
Awesome! Thank you, thank you!
I actually really like Oreo, just trying to get Oreo and WiFi calling working on my phone (My Office at work fights all day for 1 bar of cell signal), I had hoped that WiFi calling worked in the SM-G930U variant since everyone talked about it running so much better, but alas, it still doesn't support WiFi Calling (Stupid me for thinking it might have had support added recently).
Thank you again
(My Wife is sure to get upset with me once again working on my phone again today... whoops)
Thanks , G930AUCS8CRJ2 is working fine so far. Do you mind sharing how you go about 'converting' a set of ODIN files to a flashable adb zip? Do you just unextract every single archive in the .md5 files? and then zip it all up? And would rooting to G930AUCU4CRI2 brick my phone now that I am on CRJ2? My bad for all of the questions.
bnn0 said:
Thanks , G930AUCS8CRJ2 is working fine so far. Do you mind sharing how you go about 'converting' a set of ODIN files to a flashable adb zip? Do you just unextract every single archive in the .md5 files? and then zip it all up? And would rooting to G930AUCU4CRI2 brick my phone now that I am on CRJ2? My bad for all of the questions.
Click to expand...
Click to collapse
You mean about G930AUCS8CRJ2 sideload with adb? Im just pulling the update from AT&T servers and uploading it here. I don't know how to make sideload zip. And for the rooting part I don't know if its possible now because the bootloader binary was updated to 8, try to search here on xda and see if you can find root methods for this firmware
new update, check first post
----
I can ask you a question? please. My baseband is SMG930AUCU4CRE4 can i update to G930AUCS8CRK1? :/
Maury Yarik said:
I can ask you a question? please. My baseband is SMG930AUCU4CRE4 can i update to G930AUCS8CRK1? :/
Click to expand...
Click to collapse
First you need to install this:
https://forum.xda-developers.com/att-galaxy-s7/how-to/g930a-oreo-8-0-stock-att-odin-files-t3869871 (G930AUCS8CRJ2)
Then you need to go from G930AUCS8CRJ2 to G930AUCS8CRK1, G930AUCS8CRK1 to G930AUCS8CRL1 and you will have the latest update.
I actually have a S7 G930A. Rooted before, not rooted now.. Is there a way to do any of these updates without hooking up to a PC? I actually have no charge port functions and can only use wireless charger to charge the phone till i get the port fixed someday to do these features. I am on Android 8.0 oreo that i installed to sd card and updated from there like a year ago? Is that possible to do? Use SD card update.. Or. Would love to root the phone again, but cent seem to find a one click root app that will work with this phone..
Josh
Josh13400 said:
I actually have a S7 G930A. Rooted before, not rooted now.. Is there a way to do any of these updates without hooking up to a PC? I actually have no charge port functions and can only use wireless charger to charge the phone till i get the port fixed someday to do these features. I am on Android 8.0 oreo that i installed to sd card and updated from there like a year ago? Is that possible to do? Use SD card update.. Or. Would love to root the phone again, but cent seem to find a one click root app that will work with this phone..
Josh
Click to expand...
Click to collapse
Yes, you can update your phone without pc, just download the update you need from your phone, put the update in your sd card, go to recovery and select the option "Apply update from SD card"
stek-kravari said:
Yes, you can update your phone without pc, just download the update you need from your phone, put the update in your sd card, go to recovery and select the option "Apply update from SD card"
Click to expand...
Click to collapse
I was thinking something like that was possible. I have baseband version G930AUCU4CRB5 Android 8.0.0 on the AT&T Gal S7 as mentioned, I never saw any updates from this version to go up to a newer version or get into regular updates from OTA. 2 issues I would like to also fixed, that came with the manual update to 8.0 oreo on my phone was the HR heart rate sensor on the back by your flash(red LED) always goes off.. And have tried to go to Samsung health and do some settings to turn it off, but seems to show back up eventually. Also, the issue of not having a working LED indicator, works fine when the phone is POWERED off. and charges. But in OS, it won't work, screen off or on bc of the update. If anyone knows how those issues could be fixed and if there is a possible newer update from my baseband mentioned below. And thanks for the response.
HI, Help needed
Hi,
I wanted to check if it is possible to flash the latest Oreo firmware you have here for downloading dirrectly to my samsung s7 that is currently running on 7.0? Current BaseBand is G930AUCU4BQK2
Basically what happened was that i lost all my contacts on my phone, I ended up download Dr.Phone to my laptop, which i used to try and recover my numbers. What i didnt know was that dr.phone rooted my device which has caused me nothing but headaches.
I now want to flash my phone and get updated to oreo and have my phone working normally again. Since dr.phone did whatever it did to my phone I lost use of my finger print scanner, had to disable samsung health as it kept trying to open on its own, my phone is lagging and freezing constantly..
I just want my phone to be normal again and unrooted and updated.
Lastly my phone is an AT&T device, that i bought second hand in Dubai, if i flash stock firmware is it going to carrier lock my device to AT&T again?
Any advice and help with this matter would be greatly appreciated.
Hey guys.
I'm trying to update my F1 but since it's rooted, OTA is not happening (it caused my phone to TWRP bootloop) and other's have reported that they had a better working version flashing the update via the SP Flash Tool. So last time I tried using the Flash Tool was a mess getting it to work (because drives and all) so I was hoping someone might have an image of this update that I could flash via TWRP or is there's a way to convert the extracted RAR folder. Thanks for any help.
David C.
mantarkus said:
Hey guys.
I'm trying to update my F1 but since it's rooted, OTA is not happening (it caused my phone to TWRP bootloop) and other's have reported that they had a better working version flashing the update via the SP Flash Tool. So last time I tried using the Flash Tool was a mess getting it to work (because drives and all) so I was hoping someone might have an image of this update that I could flash via TWRP or is there's a way to convert the extracted RAR folder. Thanks for any help.
David C.
Click to expand...
Click to collapse
The OTA update may be used in Twrp, with some edits, depending on what all has been changed on phone .
I do not have time this weekend to look at it. But can in few days
***UPDATE***
This can update from version 20190316 only
If you open the update.zip you have from the OTA and replace the 'updater-script' with the one attached here. It should perform the update. Remove the ".txt" from the file name first
I say should , because if you have done significant modifications then that may effect its effectiveness.
@mantarkus
I put together an OTA style zip, that has the same images as sp flash install, with only exception being the preloader. The preloader from stock OTA update is different format to the preloader used in flash tool. ( Assume it has to do with the way it gets intalled ) So I have the preloader from OTA in the zip.
I have not uploaded the zip, or tested it out. Before i use the data to upload it. Let me know if you are interested.
mrmazak said:
@mantarkus
I put together an OTA style zip, that has the same images as sp flash install, with only exception being the preloader. The preloader from stock OTA update is different format to the preloader used in flash tool. ( Assume it has to do with the way it gets intalled ) So I have the preloader from OTA in the zip.
I have not uploaded the zip, or tested it out. Before i use the data to upload it. Let me know if you are interested.
Click to expand...
Click to collapse
Hey, thanks a lot. Yes, I am interested. Is this flashable via TWRP?
David C.
mantarkus said:
Hey, thanks a lot. Yes, I am interested. Is this flashable via TWRP?
David C.
Click to expand...
Click to collapse
It should be. Have not tested it. So busy lately.
Best option is to use the flash tool, but after I test this, I will uploaded it. But who knows , rumor us, there had been updated every 2 months so far. Maybe new update is out soon anyway
Anyone know if this is working on the normal F1 (Non-play) version? With the minimal differences including same SoC shouldnt it work? Anyone tested?
wtf rip, i refreshed and i landed here somehow (by my own fault probably). Mean't for: https://forum.xda-developers.com/android/development/twrp-twrp-3-3-0-0-umidigi-f1-play-t3933829
flashing this recovery on my non-play if anyone knows. Soz '
Nexus Radical said:
Anyone know if this is working on the normal F1 (Non-play) version? With the minimal differences including same SoC shouldnt it work? Anyone tested?
wtf rip, i refreshed and i landed here somehow (by my own fault probably). Mean't for: https://forum.xda-developers.com/android/development/twrp-twrp-3-3-0-0-umidigi-f1-play-t3933829
flashing this recovery on my non-play if anyone knows. Soz '
Click to expand...
Click to collapse
Yes, I have been told it does work for both play and not play. I am using the ported version of that official build , done by "ghost"
Oh right. I did a bit of searching before asking for a link but I did find this
ghost45 said:
New Umidigi f1 recovery 3.3.1 test2 is pubblished.
Test this one if all is corrected...
http://www.mediafire.com/file/1emy4tk1gvnkj96/recovery-twrp-3.3.1_Umidigi_F1_test_2.rar/file
Click to expand...
Click to collapse
Will this work fine? I know it's a test version. As long as flashing works properly, decryption and mtp works I guess that's all I need?
Otherwise what would you say is the best available twrp version right now? ?