Development ClosedMine Device Broke Sorry for letting hopes downLineage Android Distribution is a free, community built, aftermarket firmware distribution of Android 6.0 (Marshmallow), which is designed to increase performance and reliability over stock Android for your device..
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Lineage Android Distribution is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
Join G+ Group
Press Thanks If you like my work
Downloads
-------------------------------------------------
I8552: Click Here
Patch To Fix CPU Freq & LagClick Here(Updated)
Patch To Fix CPU Freq&Lag+Swap EnabledClick Here(Updated)
Note:-If u getting error then install rom by there respective rev1 or rev2 method and then reboot after that flash patch
TWRP 3.0.3:
Guide To Flash TWRP: Click Here
Installation For Rev 1
* Download ROM (ofc)
* Wipe System, Data,Cache, Dalvik Cache
* Install ROM
Optional:
Without Rebooting, just after installing ROM:
* Install G-Apps (Link Below)
* Reboot
Installation For Rev 2
1. Through the Stock recovery wipes are making (data, cache, dalvik-cache, factory-reset) recovery
2. Install TWRP by odin---> TWRP (In TWRP wipe DO NOT NEED !!!!)
3.Install Lineage OS!
Installation Of Patch
1. Download zip file (From Downloads Section)
2.Boot In TWRP and Flash zip
3.Reboot !
Download G-Apps:
Click Here
* Select ARM>>> 6.0 >>> Pico version
ChangeLogs:
Code:
5th Feb:
-Fixed Wifi error in Patch 1 and 2
4th Feb :
-Swap Enabled
3rd Feb:
-Patch added
-Faster Bootup
-Fixed CPU governor issue
-Fixed CPU scaling issue
-Fixed YouTube Videos Lag
14th Jan:
-Initial Release
-Better Battery
-Better Performance
Bugs
- Screen Recording
-Camcorder
-Bluetooth
-Cant change cpu governor[fixed]
- Rest you tell me
Tips:
* On first boot, or after rebooting device,turn your screen off, and left it for 2-3 mins to settle it down. After that use it,for better performance.
* In developer option, change animator,window and transition scale to 0.6 or less than it. (No need to completely disable it).
Contributors
androidlover5842 (Without him LOS13 will not be made for our device)
weritos(without him nothing is possible)
Kabir Kalsi (letting me use urs gcloud)
remittor (for device tree)
[email protected](for testing patch 2)
Source Code
Source: Click Here
Compatibility Patches: Click Here
Version Information
Status: Beta
ROM OS Version: 6.0.x Marshmallow
Created 2017-01-14
FAQ
1.To Install Xposed installer
-Flash LOS13 According to Ur device rev 1 or rev2 (dont flash gapps)
-After LOS13 is flashed then Flash Xpose installer file Download
-wipe cache and dalvik
-reboot (will take 20 min hardly)
-Install Download
-Flash Gapps
2. How to enable root access
-Enable Developer options: Go to Settings » About phone » Tap seven times on Build number
-Go back to Settings main menu and open Developer options from there.
-Look for Root access setting, and set it Apps and ADB
3.How to Increase CPU Min freq
-Download Arubadel (i prefer)or This
typo on date Created 201-01-14
AWESOME Hope I would get great battery life with low sound bug fixed on this ROM [emoji1]
BTW, there is no Rev1, Rev2. But some devices like mine can't wipe in TWRP. Only need to wipe through stock recovery, otherwise it causes bootloop. So how can I flash it? @tejus
Sent from my Micromax P290 using Tapatalk
Error in Twrp when flashing rom!
Does it work on Win Rev2?
Try CM13 rev2 installation guide
SonOfSparda said:
AWESOME Hope I would get great battery life with low sound bug fixed on this ROM [emoji1]
BTW, there is no Rev1, Rev2. But some devices like mine can't wipe in TWRP. Only need to wipe through stock recovery, otherwise it causes bootloop. So how can I flash it? @tejus
Sent from my Micromax P290 using Tapatalk
Click to expand...
Click to collapse
And tell that works for u or not?
Try this and inform
Pedro Henrique 12 said:
Does it work on Win Rev2?
Click to expand...
Click to collapse
1. Through the Stock recovery wipes are making (data, cache, dalvik-cache, factory-reset) recovery
2. Install stock rom --> STOK ROM
3. Install TWRP ---> TWRP (In TWRP wipe DO NOT NEED !!!!)
4. Install Lineage OS!
I did the procedure correctly, and this error occurred
Obs: I was using Cm13
Awesome!! thank you guys!!
:fingers-crossed:
We will receive new updates via OTA??
Erro
Here it was the same Pedro Henrique.
Can someone help?
Use latest TWRP
Pedro Henrique 12 said:
I did the procedure correctly, and this error occurred
Obs: I was using Cm13
Click to expand...
Click to collapse
Link of latest TWRP is in thread so flash TWRP version 3.0.3 and rom will be flashed with no error
Bugs Report
Great Work Tejus.
Bug #1 - In Play store, many apps (esp. WhatsApp) shows error "Your Device isn't compatible with this version" as in attached screenshots, So can't be installed through play store, even in the oldest android 4.x, these apps were able to install via play store.
Bug #2 - Auto Screen-Brightness bar not working., It worked after I disabled "Adaptive Brightness" in "Setting->Display & Lights".
Bug #3 - Physical home button doesn't wake up screen.
Request #1 - Double Tap to sleep on status bar can be enabled, working perfectly, if Double Tap to wake-up feature is added, will be great and appreciable.
Request #2 - Make changes in system, so bigger open-gApps ( like stock or Full ) can be installed via Recovery. I was only able to installed only pico and mini version of GApps.
These all problems were also in the earlier CM 13 Rom for this device.
Waiting eagerly for resolution of play store.
tejus said:
And tell that works for u or not?
Click to expand...
Click to collapse
Yes it worked First boot took very longer than other ROMS but it's okay, it finally booted.
Issues I'm having are:
Can't give root access to only CM File Manager.
Animations are not smooth and fast. Even changing animations scale do not help
what about the battrey life anyone tested.
Agree with bug#1
ravi2106 said:
Great Work Tejus.
Bug #1 - In Play store, many apps (esp. WhatsApp) shows error "Your Device isn't compatible with this version" as in attached screenshots, So can't be installed through play store, even in the oldest android 4.x, these apps were able to install via play store.
Bug #2 - Auto Screen-Brightness bar not working., It worked after I disabled "Adaptive Brightness" in "Setting->Display & Lights".
Bug #3 - Physical home button doesn't wake up screen.
Request #1 - Double Tap to sleep on status bar can be enabled, working perfectly, if Double Tap to wake-up feature is added, will be great and appreciable.
Request #2 - Make changes in system, so bigger open-gApps ( like stock or Full ) can be installed via Recovery. I was only able to installed only pico and mini version of GApps.
These all problems were also in the earlier CM 13 Rom for this device.
Waiting eagerly for resolution of play store.
Click to expand...
Click to collapse
Bug#2 is not bug ourdevice dont have light sensor so default is set 50% brightness and u can change brightness by disabling adaptive brightness
Bug#3 check out home to wake up option in settings / buttons but by default is home to wake up is enabled
Will try to do complete ur req1 and flash pico and install gapps what u want if u will install in system that will cause more battery drainage for now
Can try this
SonOfSparda said:
Yes it worked First boot took very longer than other ROMS but it's okay, it finally booted.
Issues I'm having are:
Can't give root access to only CM File Manager.
Animations are not smooth and fast. Even changing animations scale do not help
Click to expand...
Click to collapse
increase min freq when u do multitasking by this app i prefer https://github.com/Arubadel/Arubadel/releases
and m not facing any root issuse with cm file manager .:good:
Try Yourself
[email protected] said:
what about the battrey life anyone tested.
Click to expand...
Click to collapse
This rom has best battery pack then CM13 and PAC13 for now
tejus said:
increase min freq when u do multitasking by this app i prefer https://github.com/Arubadel/Arubadel/releases
and m not facing any root issuse with cm file manager .:good:
Click to expand...
Click to collapse
CM file manager just doesn't ask for root at all
I increased min freq and it's okay for now but it still needs to be improved
Also I saw deep sleep option in Arubadel. What is it and does it affect phone functionality?
Sent from my Micromax P290 using Tapatalk
Its like
SonOfSparda said:
CM file manager just doesn't ask for root at all
I increased min freq and it's okay for now but it still needs to be improved
Also I saw deep sleep option in Arubadel. What is it and does it affect phone functionality?
Sent from my Micromax P290 using Tapatalk
Click to expand...
Click to collapse
For night or long standby when u dont use ur phone then u can enable that option it will turn off 3 cores and will run on 1 core @ 245mhz so will conserves battery and when u wake up ur device u need to manually turn on the cores and In setting /general from there u enabled root user?(in cm file manager) or just check root access setting in developer options
tejus said:
For night or long standby when u dont use ur phone then u can enable that option it will turn off 3 cores and will run on 1 core @ 245mhz so will conserves battery and when u wake up ur device u need to manually turn on the cores and In setting /general from there u enabled root user?
Click to expand...
Click to collapse
When I tried to do that, then nothing happens. No root access prompt appears. But it's not a big problem for me as I use root explorer.
Sent from my Micromax P290 using Tapatalk
Related
FIUI (Future Interactive UI)[highlight]
the Original ROM is made by fiui team and Toss XXL
I have beautified the Rom :angel:
[/highlight]
Code:
*** Disclamer
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
Introduction
ROM Details:
* Android version: 4.4.4
* Current FIUI version: 2.32.0
* Based on: Cyanogenmod 11
* Multilanguage
* The status bar color matches every app you open
* You can choose beetween Dalvik and ART runtime!
* ROM porter: Me
* ROM creator: Toss XXL
* ROM date: 2015/10/27
* Official ROM website: www.fiui.org
Click to expand...
Click to collapse
Images
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Click to expand...
Click to collapse
Installation instructions
Code:
[color=blue]
* Download the ROM *
* Reboot to recovery *
recommend Philz recovery found here (ONLY for dior) [URL="https://www.androidfilehost.com/?w=files&flid=38171"]Updated Recoveries thanks to @haoyangw [/URL]
* Wipe data/factory reset *
* Flash the ROM (no need of Gapps) *
* Reboot your phone *
* Enjoy *
[/color]
Download
ROM -> FIUI beautify v2.32
Dolby Atmos
Changelog
Code:
Current changelog: 27/10/2015 CodeName: Beautify :angel:
-> Base Update to v2.32
-> Removed bloat and bugs, UI is more fluid
-> add Walkman Audio Technology with Clear+
-> included minimal gapps
-> new binaries for faster installation
2015/06/06
2.23.0:
-> Added support external storage device when you install software-selectable mounting position
-> re-optimization wake-up mechanism, the theoretical chance to be more energy-efficient
-> Optimization fantasy status bar color picker mechanism
-> fix the problem later in the hook of notification systemUI FC
-> Repair Gallery left corner of the text display is not exactly a problem
-> update framework for developers, system settings UI and 480p image resources
Click to expand...
Click to collapse
FAQ
Q: Can I convert to ART?
Answer: Yes, on ur own risk (some apps cannot be updated in ART ex: Whatsapp)
Q: Can I install CM11 themes?
Answer: No, for now u cannot, dont try to install any theme, system might get unstable
Q: Where to report a bug?
Answer : Use the report bugs tab I will only see that :angel:
Click to expand...
Click to collapse
Thanks To/Credits
Code:
FIUI.org and team
CyanogenMod
Toss XXL
@ibanez7 for Walkman
XDA:DevDB Information
FIUI, ROM for the Xiaomi Redmi Note
Contributors
Pavan l, Toss XXL
Source Code: http://www.fiui.org
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: MIUI 6
Based On: CyanogenMod
Version Information
Status: Stable
Current Stable Version: 2.32.0
Stable Release Date: 2015-10-27
Created 2015-06-16
Last Updated 2015-10-26
Reserved
Features :-
1 -> Super Fast charging with Amazing battery life (on ART its More amazing )
2 -> Dynamic Fantastic Bar (Better than any xposed module)
3 -> This is the only rom in which LED notifications are working (except in MIUI 6)
4 -> Slim Notification bar... believe me its more than awesome
5 -> Overnight battery drain is almost NIL or 1% if G-services are disabled
6 -> Everything is working absolutely flawless and bug free
7 -> Minimal settings
8 -> Super Fast Boot time
9 -> Call UI is soo smooth
10 -> Battery Life is about 2 days of normal usage (whatsapp , Calls, etc)
11 -> Only thing is u should set frequency to 1.4Ghz while gaming and it heats up a bit in games (Only in heavy games U should set this, in normal games no need )
12 ->Cm11 theme engine is present but not working ( U wont need it! default UI is beautiful enough )
13 -> SONY Walkman with clear+ technology
If u find anymore, or anything, post it, I'll add here
If anyone can post a How to Video and battery life stats it would be help full
2.24.0 is available @@ but I thought the original ROM supported English?
It will be great to collect some experience about this ROM, not in Chinese. How is battery life, how is camera blur and else comparing with MIUI 6.
I tried it some versions before, I think it was 2.12 or 2.16, I dont remember and it was so good. Its smooth and battery is also good. I returned to Miui because camera is better and audio with headphones was a "bit normal", wasn't as good as in Miui.
They now have Viper4android I think and more improvements, so I think it should be ok now.
Installation guide and review after using a day
installation method.
1. flash TWRP Recovery available on download section.( if u want
install TWRP.. download the file and rename it update.zip. and placed
in internal memory and don't put in to inside of any folder the first
letter should be .that means u should be small.. and go to updater app
and choose options and choose reboot in to recovery and in recovery u
will find update options .choose update and it will show the progress
menu.)
cwm or philz recovery doesn't work.
2. create a back up using TWRP for current rom
3. download and extract the folder .. I am used 7z app from playstore.
4. after extracting copy the folder which will like 20.06. ... and
paste in to to following path. internal memory/TWRP / backups / paste
here.
5. delete the previous back up or leave it as it is. but u should
select the proper back up during restore.
6. go to updater ,press option and select reboot in to recovery.. else
power off and press power button and volume up button.. release the
power button when MI appears on screen. but u should have to hold the
volume up button until it go to recovery
7. go to format wipe data. system.cache..
8. back to home menu and select restore options . u will find the
backed up file and select it.. it will take approximately 150 second.
Dude it doesn't seem to download, it's just loading the download.....
lampros00b said:
Dude it doesn't seem to download, it's just loading the download.....
Click to expand...
Click to collapse
Try this
https://drive.google.com/uc?export=download&id=0B8Zv1JCeUVQ8SFB1c2J3MmNwaDA
I was busy for few days so I could'nt explain its features in that reserved post... In few mins I'll edit that
Pavan l said:
Try this
https://drive.google.com/uc?export=download&id=0B8Zv1JCeUVQ8SFB1c2J3MmNwaDA
I was busy for few days so I could'nt explain its features in that reserved post... In few mins I'll edit that
Click to expand...
Click to collapse
Still doesn't work.... Am i doing something wrong?
lampros00b said:
Still doesn't work.... Am i doing something wrong?
Click to expand...
Click to collapse
its working all right, maybe u r doing something wrong, try with stock browser and click on "download anyway" it should start :angel:
Pavan l said:
its working all right, maybe u r doing something wrong, try with stock browser and click on "download anyway" it should start :angel:
Click to expand...
Click to collapse
Still doesn't start,anyway forget it,i really wanted to try your work tho..... Would it be too difficult to upload the rom somewhere else like mediafire?
Fixed it!!Sorry for the trouble...
Playstore doesn't work
Tested
IVe downloaded fiui rom and use it for few days, looks good, no bugs at all, better than pac man as pacman got few error sometimes. Playstore works fine after install cm11 based gapps and updated google services. But, i notice my battery drain quite fast, even not using the phone, after i set powersaving in cpu control it become slightly better. And one thing i want to ask, my contact list, i dont hv features to search based on alphabet, hv to scroll down to look for contact, is it just me or others also hv same prob?
Going to try this rom today. Hopefully its screen touch isn't as bad as all the other rom's are !
Would not flash
I downloaded the file , checked the size , put on the root of the SD , named update.zip , have TWRP , boot to recovery , tried to flash , twrp just restarts .. nothing happens .
Redmi Note 4g China.
Wrong
Obanna1 said:
I downloaded the file , checked the size , put on the root of the SD , named update.zip , have TWRP , boot to recovery , tried to flash , twrp just restarts .. nothing happens .
Redmi Note 4g China.
Click to expand...
Click to collapse
I'm afraid u r doing it wrong. please read the instructions carefully :angel:
I need help.
My TWRP recovery is not recognizing restore.
Non recovery build
christythomas said:
I need help.
My TWRP recovery is not recognizing restore.
Click to expand...
Click to collapse
Expect a non recovery build soon
I'm working on changing language in system and add a setup wizard.... till then stay tuned :angel:
can u tell me exactly what error it show?
Pavan l said:
Expect a non recovery build soon
I'm working on changing language in system and add a setup wizard.... till then stay tuned :angel:
can u tell me exactly what error it show?
Click to expand...
Click to collapse
I have no errors. First I moved the backup to the location that you specified, Then I reboot to TWRP recovery and wipe system, data,delvic and cache. Next I went to the restore option. But there was no restore point. I think it didn't detect the restore. Is this correct path : external_Sd/TWRP/BACKUPS/258ebd1e/
Is 4g working?
christythomas said:
I have no errors. First I moved the backup to the location that you specified, Then I reboot to TWRP recovery and wipe system, data,delvic and cache. Next I went to the restore option. But there was no restore point. I think it didn't detect the restore. Is this correct path : external_Sd/TWRP/BACKUPS/258ebd1e/
Click to expand...
Click to collapse
i faced the same problem!!
i hope this helps -> lets assume that u have a backup of your current rom(by TWRP backup)!
When u navigate to sdcard/TWRP/backups/ you'll be having a folder(which has some alphanumeric filename) and another folder inside it.
Just copy the "name"of the those folders correspondingly to the FIUI rom folders!!
Tadaaaaaa....you're done!!
now this restore shows FIUI rom (but in the original rom name)!This worked for me!Let me know if it helped you!!:good:
Slim Lollipop for Samsung Galaxy Star GT-S5280/2
DON'T QUOTE THE WHOLE POST !!!
DON'T SPAM OVER THE TOPIC !!!
DON'T ASK FOR ETA !!!
Click to expand...
Click to collapse
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.*/
What's working
Everything other than those mentioned in 'Not working list'.
What's not working
OpenGL drawing in SystemUI (may never be fixed). -As our GPU only supports OpenEGL es 2.0-.
Video recording
Screenshots
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Installation Instructions
Download and put the ROM zip in your phone.
You must use a SELinux enabled recovery. (CWM 6.0.5.1, TWRP 2.8/3.0). If not install that first and then proceed.
Go to recovery, wipe data/cache. (Yes you will need to do a data wipe even if you are upgrading from SlimLP to incorporate ROM changes).
Flash ROM.
Flash SlimLP update .
Flash file manager .(It wasn't built during building slimlp so I had to provide it separately ) .
(Optional) Flash overclocked kernel if you like .
(Optional) Flash gapps.
Reboot.
Enjoy.
Download
SlimLP - Beta 1
SlimLP update : Here .
Overclocked kernel : Here (DON'T GO OVER 1200MHZ AS SOME MEMBER REPORTED THAT THE PHONE IS FREEZING). .
File Manger
Gapps - opengapps.org
Source
Device Tree
Vendor Tree
Kernel Tree
Credits
@corphish - for tree , instructions and another stuff !
@Dreamstar - For his SELinux enabled recovery .
@psych.half - For his kernel .
@andii_nr - For fixes.
@regalstreak - For his highly compressed CM12.1 sources.
@doesntexits && @ngoquang2708 - For their works for SGV and for their keen interest in helping us.
Open camera team .
Without them all SlimLP wasn't be possible.
XDA:DevDB Information
SlimLP 5.1.1, ROM for the Samsung Galaxy Star
Contributors
LahKeda
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.0.x
Based On: SlimLP
Version Information
Status: Beta
Current Beta Version: 1
Beta Release Date: 2016-08-02
Created 2016-08-02
Last Updated 2017-04-11
F.A.Q
F.A.Q :
Q - Why you mustn't quote the hole post ?
A - As you are killing us dude !
Q - Why mustn't I ask for ETA ?
A - Simply , we are students and colleges so we are busy with our studying and other life problems !
Q - Why mustn't you Spam ?
A -As Organization Is the key to achieve the impossible !
Q - I have faced some issues, which is not mentioned in the 'Not Working' list........?
A - For bug reports, the least we can expect from you is a logcat taken during the issue. Or atleast, you could tell us how and when did you face the bug, how can we reproduce the bug to fix it. Reports without any of these will be ignored.
Q - Can I use your ROM/any part of ROM and modify it and release it separately?
A - Yes you can. But please mention proper credits.
Q - I flashed this ROM, but I dont find any Google App, where can I find it?
A - gapps will be mentioned later in OP but you can get them from any where and flash it !
Bug reporting
How to report a bug?
First off all, check the 'not working' list and see if the bug you are facing is already mentioned or not. If it is, stop right away because the concerned people working on the ROM are aware of the issue.
If the bug/issue is not mentioned in 'not working' list, check the Frequently Asked Question (F.A.Q) and see if issue is resolved already.
If the issue you face is not in FAQ either, you would probably post a reply in this forum, and not PM anyone, about the bug.
Attach a logcat.
If not possible, mention a proper way how you encountered the bug.
Also mention any 3rd party stuff you installed. (Like mods, themes, kernels etc)
Following things WILL NOT be considered as bugs. So please do not post such bug reports, they will be ignored.
Low benchmark scores. Even if Stock results better.
Poor performance in gaming. Even if Stock results better.
High RAM usage/low RAM available.
Various kernel control app crashes.
Crashes of various UI elements when a custom theme/mod is applied.
Random reboots, and other issues caused by flashing custom kernel.
Change Log
Change Log
Code:
[SIZE="3"]
[U][B]Update - 2017 January 25 :P [/B][/U]
-Fix Email,DeskClock and Calculator .
-Provide OverClocked kernel to 1300MHZ .
-Update post : [URL="https://forum.xda-developers.com/showpost.php?p=70715113&postcount=45"]here[/URL].
[U][B]Beta 1 - 2016 August 2[/B][/U]
-Initial release.
[/SIZE]
another reserved one for free
- File manager is missing
Edit: Now present in download links.
Is the animation bug (like in cm12.1) present? or is it fixed like cm13?
nagato said:
File manager is missing
Click to expand...
Click to collapse
Sorry , during building this rom file manger wasn't built and I forgot to mention that .
You will need to install third party one . you can flash this one Here .
LuciusRJ said:
Is the animation bug (like in cm12.1) present? or is it fixed like cm13?
Click to expand...
Click to collapse
For recent app panel it's solved by using slim recent app panel but for notification and brightness slider it wasn't .
LahKeda said:
Sorry , during building this rom file manger wasn't built and I forgot to mention that .
You will need to install third party one . you can flash this one Here .
Click to expand...
Click to collapse
Things maybe worth consideration:
- i once installed zapdos kernel long time ago, but the of zapdos is still there, hope you can do something about it
- launcher settings not showing, also not working like wallpaper scroll
- status bar and quick settings panel glitches, i.e, status bar got lost while trying to modify 'interface' settings
- soft reboot option seems to be missing after enabling advanced boot (if reboot to bootloader is not soft reboot)
- recent app list by long pressing home button is not coming
- notification glitches - notifications are not being updated, like while downloading app from play store, installing apk files.
- Try this:- open app drawer and press settings button. Settings would appear in background but drawer won't exit automatically.
nagato said:
Things maybe worth consideration:
- i once installed zapdos kernel long time ago, but the of zapdos is still there, hope you can do something about it
- launcher settings not showing, also not working like wallpaper scroll
- status bar and quick settings panel glitches, i.e, status bar got lost while trying to modify 'interface' settings
- soft reboot option seems to be missing after enabling advanced boot (if reboot to bootloader is not soft reboot)
- recent app list by long pressing home button is not coming
- notification glitches - notifications are not being updated, like while downloading app from play store, installing apk files.
- Try this:- open app drawer and press settings button. Settings would appear in background but drawer won't exit automatically.
Click to expand...
Click to collapse
I didn't understand first and third ones .
for recent app menu you should go activate it by navigation->hardware buttons -> enable custom actions -> home key -> long press-> recent .
for soft reboot it's because of slim it self not me .
for launcher thing like settings , scrollable wallpaper , etc you can try using different launcher .
for notification bar glitch like not updating , brightness bar ,etc those glitches weren't even fixed in CM12.1 so we may not get it fixed here .
anyway this is not the last build and there will be another builds so we should get more fixes .
waaw ..
nice broo
LahKeda said:
I didn't understand first and third ones .
for recent app menu you should go activate it by navigation->hardware buttons -> enable custom actions -> home key -> long press-> recent .
for soft reboot it's because of slim it self not me .
for launcher thing like settings , scrollable wallpaper , etc you can try using different launcher .
for notification bar glitch like not updating , brightness bar ,etc those glitches weren't even fixed in CM12.1 so we may not get it fixed here .
anyway this is not the last build and there will be another builds so we should get more fixes .
Click to expand...
Click to collapse
First - Whenever i restart my phone, zapdos image that came with the zapdos kernel by corphish pops up (since i installed long ago).
Third - In settings -> interface, i was messing with quick settings which crashed status bar. (Although seem to work fine after restart, but hangs sometimes)
Can i increase LCD density? Would it increase display quality?
- Mobile data not working on sim slot 1 (m.p).
- Brightness slider crashes the status bar.
One more thing - In app settings (setting in any app), scrolling has some serious display issues. The content where we scroll to is not being displayed.
#edited delete
So finally you have uploded it!
Good job @LahKeda
You fulfilled my wish also.
Sent from my SM-G935F using XDA-Developers mobile app
w8ng for slim MM,. .THANKS FOR THIS ROM DEVS,.
nagato said:
First - Whenever i restart my phone, zapdos image that came with the zapdos kernel by corphish pops up (since i installed long ago).
Third - In settings -> interface, i was messing with quick settings which crashed status bar. (Although seem to work fine after restart, but hangs sometimes)
Can i increase LCD density? Would it increase display quality?
- Mobile data not working on sim slot 1 (m.p).
- Brightness slider crashes the status bar.
One more thing - In app settings (setting in any app), scrolling has some serious display issues. The content where we scroll to is not being displayed.
Click to expand...
Click to collapse
-It was a boot logo corphish has made for his kernel and you can change it by another one there are some boot logos in theme and mod section you can install whatever you want or you can follow cophish's tutorial he has made .
-status bar maybe just was restarting to apply new changes .
-When I changed the density it made things smaller and bigger so I don't think that it has things to do with quality .
-Will check mobile data problem soon .
-Brightness slider and scrolling are glitches in this ROM and cm12.1 and I'm doing my best to fix them .
@LahKeda bro
i tested this rom it works same as cm12.1 but little smoother than that one
filemanager zip is not working due to, you sign the apk to system/apps please change the directory to system/app and reupload it.
reduce the glitches as possible
please tell me how to use swap file as RAM
n.s.sivashankar said:
@LahKeda bro
i tested this rom it works same as cm12.1 but little smoother than that one
filemanager zip is not working due to, you sign the apk to system/apps please change the directory to system/app and reupload it.
reduce the glitches as possible
please tell me how to use swap file as RAM
Click to expand...
Click to collapse
sorry about that the zip has been updated and thank you for reporting link
@LahKeda
If possible, please increase the sound. I like to play songs but the volume is very less.
You never stop work very good job :fingers-crossed:
Sent from my Samsung GT-S5282 using XDA Labs
---------- Post added at 08:59 PM ---------- Previous post was at 08:56 PM ----------
Place test reboot to recovery coz I don't have PC and well you no bootloob
Sent from my Samsung GT-S5282 using XDA Labs
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Havoc-OS is an all new ROM based on LineageOS.
So many features that you probably won't find in any ROM.
Just flash and enjoy...
General:
System-wide Rounded UI
Spectrum support
Razer Phone lock/unlock sounds
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
We'll not support users and answer questions from users which:
are running a custom kernel
have flashed mods
modified system files
didn't follow our intructions word by word
are unfriendly
And most important: DON'T READ THE OP
BUGS:
Same as Lineage OS 15.1
Turning on AutoBrightness disables the adjustment of brightness manually, even when turned back off; To fix this, download this app from here and play with the brightness adjustments for about a minute then reboot, you can uninstall the app once brightness adjustment is fixed in statusbar (CONFIRMED FIX)
Another fix is Settings-> Havoc Settings-> Status bar then enable Brightness Control then in Settings-> Havoc Settings-> Quick Settings change Brightness slider to "Hide" option, then you will be able to slide your finger across the status bar to adjust the brightness. (CONFIRMED FIX)
Changing system font in Settings -> Havoc Settings -> Interface causes bootloop
LineageOS Team (https://www.lineageos.org)
AICP (https://www.aicp-rom.com)
MSM-Xtended Team (https://forum.xda-developers.com/on...nt/cardinal-aosp-5-0-android-8-0-pre-t3693585)
Crdroid (https://crdroid.net)
Omnirom (https://omnirom.org)
And all the other Developers, Testers, Donators and Users.
[NOTE]:
If you couldn't take screenshots, go to /system/vendor/lib/hw, make a backup of [email protected] somewhere else, then delete it from this folder
The camera preview will freeze and you can't capture or record after this. To restore original camera function (but will derp screenshot again), restore the backed up [email protected] again to /system/vendor/lib/hw
First time installing Havoc OS to your Galaxy Grand Prime, or coming from another ROM?
Install latest TWRP Recovery MUST USE VERSION 3.2.2-0 OR ASSERT ERROR OCCURS
Reboot into Recovery using 3-button-combo (Vol-up+Home+Power)
Do a Nandroid backup! (Optional and only if you weren't running TouchWiz before)
WIPE (wipe data/factory reset + wipe cache partition + format /system partition)*
Install the ROM from sdcard using TWRP Recovery
Optionally install the Google Apps ( get it here: https://opengapps.org ) (pico GAPPS recommended) (*)
[NOTE]:
If you're about going to install GAPPS with ROM, install it right after you've installed the ROM, else you have to do a factory reset if you've booted the ROM first
DOWNLOAD
ALPHA-1: Link
Donate to me:
XDA:DevDB Information
Havoc OS, ROM for the Samsung Galaxy Grand Prime
Contributors
Alando123, remilia15
Source Code: https://www.github.com/Havoc-OS
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Stock Lollipop 5.1.1
Based On: Lineage OS
Version Information
Status: Alpha
Created 2018-08-13
Last Updated 2018-08-13
FAQ
Q: ETAs?
A: See here: Link
Q: Anymore models supported?
A: Just SM-G531BT and SM-G531H
Q: Is init.d supported on this ROM?
A: Every LineageOS/CyanogenMod ROMs support init.d, so be free at scriptings
Q: Can you include ABCXYZ feature / Samsung Apps here?
A: NO!
Q: Can I use your ROM as a base for portings?
A: Yes, and mention this thread
Q: Server error in Google Play Store?
A: Install latest Google Play Services manually first (might take long time, due to Lollipop's nature), then you can install apps from GG Play as usual
Q: How to use adoptable storage feature? I see it's new in Marshmallow
A: Go to Settings >> Storage & USB >> Tap on the SD card label (not the eject icon) >> 3 dots menu on the top right >> Settings >> Format as internal and done!
Q: Where's the MTP option? I don't see it in Storage settings
A: This feature has been moved to Developer settings, and will reset to default (Charging) after every reboots. Enable developer options first by tapping 7 times on Build number in About phone section >> Go to Developer settings >> Select USB configuration. The fastest way to do this is plug in your USB with your PC, scroll down notification bar and tap on "USB for Charging"
Q: Where's the "running" section in Apps settings?
A: It has been cut off separately to Memory setting and "Running services" in Developer settings. You can see the memory used by apps for a period of time and closing apps too, but they won't disappear in the menu, and in "Running services", still same as old-fashioned running apps section
Q: Can't install GAPPS or ROM?
A: Install latest TWRP
CHANGELOG
(DD-MM-YYYY)
13-08-2018
ALPHA-1: Initial release of Havoc OS
Some screenshots
thank you for porting havocOS.
Any solution for camera running on WhatsApp footage
volume slide android P stayle only for ring volume not work on g531h after some hours .solution?
Thank you very much for this rom im downloading it right now
can't install apks and take screenshots
when i try to take a screenshot o screen recorder a notification say " the app o your organization doesn't allow screenshots".
After rooted with magisk, i can't install apks from anywhere.
christianrr94 said:
when i try to take a screenshot o screen recorder a notification say " the app o your organization doesn't allow screenshots".
After rooted with magisk, i can't install apks from anywhere.
Click to expand...
Click to collapse
Use SuperSU to bypass app installation error. For screenshot [emoji58], Read the OP again & again.
Stable rom ?
When you guys will release the stable version of havoc os based on oreo for galaxy grand prime(sm-g531h)?
problems with net signal each day,i have to reboot after that everyday. and i can take photos but cant record.
I have a problem, install Havoc Rom, but it does not recognize my microSD, that is if it appears but when I try to manage nothing appears, I thought it was something of the rom so I changed to the Xenon Rom but I did not recognize it either, before I used one of 32gb now I use a 64 gb one no longer recognizes me, someone knows how to fix it?
Sent from my SM-G531H using XDA Labs
OMG!
Thank you very much for this IMPRESSIVE rom! Indeed I tried way a lot but found this one by far better and almost perfect. Though I have only two issues. 1. Video recording doesn't working alt all. 2. As you know, screenshot. By the way, my device(grand prime g531h)shows kernel isn't seandroid enforcing, but it functions properly, is it normal?THNX
The rom support extsd 64 gb?!:crying:
Sent from my SM-G531H using XDA Labs
Great Rom but have an issue
Video recording doesn't working, It says "Could not start media recorder. Can't start video recording", With the Stock camera and with App's like WhatsApp, I Already try clean the cache and anothers solutions on the web. Device rooted with Magisk.
sorry for the stupid question but, can I flash this on G530H specifically the XCU model?
Shiro39 said:
sorry for the stupid question but, can I flash this on G530H specifically the XCU model?
Click to expand...
Click to collapse
No, only compatible for the G531H model.
SsIyMrOiNa said:
Thank you very much for this IMPRESSIVE rom! Indeed I tried way a lot but found this one by far better and almost perfect. Though I have only two issues. 1. Video recording doesn't working alt all. 2. As you know, screenshot. By the way, my device(grand prime g531h)shows kernel isn't seandroid enforcing, but it functions properly, is it normal?THNX
Click to expand...
Click to collapse
Well, I cant answer your first question but as for your second one, Thats pretty normal. Usually happens to me after installing a custom recovery.
Emm first i have to say good job, great rom but there is another way to able the screeshoots or could explain more specific how do a right backup, for this ROM in this device sm g531h. Im new and dont want brick issues...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Galaxy A3 2016 | a3xelte | SM-A310xx
OFFICIAL | Android 9.0
Download
Changelog:
Code:
[COLOR="Teal"]2019-07-07[/COLOR]
- More SELinux fixes (Stricted)
- Remove old implementation of Keydisabler and use Lineage Touch HAL instead (Stricted)
- dotOS 3.1 with many UI improvements and new features
- June 5 Security Patch
- Camera deadlocks are gone now (at least when using default Snap Camera) by fixes in the camera wrapper (danwood76)
- Updated stock vendor blobs (danwood76)
- Improve WiFi battery consumption by enabling the capability of the WiFi firmware to scan efficiently in the background in the framework-res overlays (danwood76)
- Add missing magnetometer config file in vendor/etc/yas_set.cfg (danwood76)
[COLOR="Teal"]2019-05-16[/COLOR]
- Update vendor security from 2018-07-30 to 2019-02-01
- Switching to NFC force download mode in libnfc-sec-hal.conf to improve reliability although turning on can take longer (danwood76)
- More SELinux fixes (danwood76)
- Fixed kernel issue from stock that the device was not charging sometimes (danwood76)
- May 05 2019 security patch (danwood76)
[COLOR="Teal"]2019-04-10[/COLOR]
- Fixed Tethering and Hotspot by enabling CONFIG_NETFILTER_XT_TARGET_CT in the kernel defconfig (danwood76)
- Much more kernel improvements (danwood76)
- Cleaned up ramdisk
- April 05 2019 security patch
[COLOR="Teal"]2019-03-29[/COLOR]
- More SELinux fixes (danwood76)
- Touchkeys are now also disabled when the display is turned off (danwood76)
[COLOR="Teal"]2019-03-26[/COLOR]
- Initial Release
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
Click to expand...
Click to collapse
Installation instructions:
1. Make sure you have TWRP installed on your device to be able to flash the rom.
2. Download the latest build from the link above and copy it to a place where you can find it later.
3. Optionally download GApps for using the Play Store and other Google related services from here: https://opengapps.org. Choose ARM as architecture and 9.0 as the OS version. The size of the GApps package is upon to you how much apps you want to have preinstalled. Copy this zip aswell to a place where you can find it easy later. If you download it with Chrome or with the Google Drive App it should be by default in the Download folder.
4. Turn your phone off and press Volume UP + Home Button + Power button at the same time until the splash screen appears. Then your device should boot into the recovery. There you wipe following partitions: Data, System, Cache, Dalvik if this is your first install. All of your installed applications get lost by this. Your photos, videos etc. won't get deleted if you haven't ticked the box for internal storage. As the kernel also supports F2FS i would change the filesystem for the cache partition from ext4 to f2fs for a better system performance. Now go to the main TWRP menu, click on install and go to the place where you have placed your zips and first select the rom and then click on the left button if you have downloaded the optional GApps package to add another zip to the queue. Now swipe the slider at the bottom to install and reboot the phone to the system. The first boot can take a while and after booting you could experience some lags because of the GApps initialization but they should disappear after some time.
4. Now you have successfully installed the rom and you're ready to use dotOS on your device. Congratulations!
Bugs:
- VoLTE (isn't working on samsung devices and won't work anytime in the future too)
- HWC isn't enabled yet (could lead to a bit performance decrease in apps with alot of layers)
XDA:DevDB Information
dotOS 3.1 for the Galaxy A3 2016, ROM for the Samsung Galaxy A Series
Contributors
dariotr
Credits
@danwood76
@Stricted
@alexax66
Source Code:
https://gitlab.com/dariotrombello
https://gitlab.com/Exynos7580
https://github.com/DotOS
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.10.x
Based On: dotOS
Version Information
Status: Stable
Stable Release Date: 2019-03-22
Created 2019-03-22
Last Updated 2019-07-11
Discord
I've created a new Exynos 7580 Discord because the old one from the Lineage 15.1 project got deleted. I regularly share testing builds here. Join if you want . If you have any questions or problems with the ROM, write them also there.
https://discord.gg/TEfC5hA
Building
You can find a guide for building dotOS for the Galaxy A3 2016 here: https://github.com/dariotrombello/local_manifests
Wow! Very great!
fix hwc
to enable hwc use this commit
https://github.com/SamsungGalaxyJ5-...mmit/8017ccdab7aa8d31c5de755a98717877551046e1
Jullian_Ms said:
to enable hwc use this commit
https://github.com/SamsungGalaxyJ5-...mmit/8017ccdab7aa8d31c5de755a98717877551046e1
Click to expand...
Click to collapse
Are you sure that this is working? I think it has to do with something else
The ROM is now out official with working OTA Updater. Changelog from the last unofficial build:
- Widevine L1 is working now for a better quality when streaming movies etc. via Amazon Prime or Netflix (thanks to danwood76)
- A few more SELinux fixes
Borduni said:
The ROM is now out official with working OTA Updater. Changelog from the last unofficial build:
- Widevine L1 is working now for a better quality when streaming movies etc. via Amazon Prime or Netflix (thanks to danwood76)
- A few more SELinux fixes
Click to expand...
Click to collapse
Although we now have Windevine L1 our phone is not supported on Netflix or Amazon Prime (it is not on stock either).
There are some hacked versions of Netflix floating about but I don't think you really need HD on our tiny screen .
danwood76 said:
Although we now have Windevine L1 our phone is not supported on Netflix or Amazon Prime (it is not on stock either).
There are some hacked versions of Netflix floating about but I don't think you really need HD on our tiny screen .
Click to expand...
Click to collapse
Widevine L1 is even supporting 4K, isn't it?
Borduni said:
Widevine L1 is even supporting 4K, isn't it?
Click to expand...
Click to collapse
L1 just enables a more protected version of DRM, it is carried out in a secure area of the CPU (mobicore). So yes it supports higher resolutions but neither Netflix nor Amazon support non certified phones, you may be able to get round it by changing the build fingerprint. I've not tested it because I have no need for HD video on a 4.7" screen .
Bug, or Problem?
Man, help me. I installed the Dot OS 3.0 (Pie) version, until I was able to use it for about 5 - 8 hours, but suddenly he started to stop the interface making me unable to use the phone, first I formatted it thinking it was just a bug , but it remained, I went back to version 2.5 of DotOS (Oreo) but still still giving the same problem ...: /
Kyukazai said:
Man, help me. I installed the Dot OS 3.0 (Pie) version, until I was able to use it for about 5 - 8 hours, but suddenly he started to stop the interface making me unable to use the phone, first I formatted it thinking it was just a bug , but it remained, I went back to version 2.5 of DotOS (Oreo) but still still giving the same problem ...: /
Click to expand...
Click to collapse
What exactly is the issue?
Did you wipe /data /system and erase the cache before installing?
Can you provide a logcat of the error?
danwood76 said:
What exactly is the issue?
Did you wipe /data /system and erase the cache before installing?
Can you provide a logcat of the error?
Click to expand...
Click to collapse
The issue is the same, the UI interface always stops running and the phone stuck for 45 seconds, after I stop the UI and restart it, the phone stay normal, after aproximately 1 - 2 minutes the problem return and permance in a loop
Yes, I did have a full wipe, data, system, cache, internal storage, etc...
Where I can get the logcat?
Kyukazai said:
The issue is the same, the UI interface always stops running and the phone stuck for 45 seconds, after I stop the UI and restart it, the phone stay normal, after aproximately 1 - 2 minutes the problem return and permance in a loop
Yes, I did have a full wipe, data, system, cache, internal storage, etc...
Where I can get the logcat?
Click to expand...
Click to collapse
You can produce a logcat using this guide: https://forum.xda-developers.com/showthread.php?t=1726238
Did you install gapps?
If so try a full clean flash but without installing gapps.
danwood76 said:
You can produce a logcat using this guide: https://forum.xda-developers.com/showthread.php?t=1726238
Did you install gapps?
If so try a full clean flash but without installing gapps.
Click to expand...
Click to collapse
Ok man, I'll try a full clean flash without Gapps and I will relate for you the situation, thanks for the response
Kyukazai said:
Ok man, I'll try a full clean flash without Gapps and I will relate for you the situation, thanks for the response
Click to expand...
Click to collapse
Yeah, I tried this and works! The phone back to work perfectly. So much thanks :victory:
But, it's possible to install the xposed with this ROM?
Kyukazai said:
Yeah, I tried this and works! The phone back to work perfectly. So much thanks :victory:
But, it's possible to install the xposed with this ROM?
Click to expand...
Click to collapse
You should be able to install the latest opengapps with DotOS without issue.
I don't think there is official Xposed for Pie, and I have heard that the unofficial is very unstable.
Why do you need xposed?
danwood76 said:
You should be able to install the latest opengapps with DotOS without issue.
I don't think there is official Xposed for Pie, and I have heard that the unofficial is very unstable.
Why do you need xposed?
Click to expand...
Click to collapse
Yeah, I see the unofficial, I will stay in Oreo, but thanks for the answer
I need the xposed for the modules: LTweaks, Gravity Box, Xposed Edge.
XD
Found a little bug
When you drop down the notification panel whilst in landscape and try to close it by tapping in the blank space below the "no notifications" text or around it, the menu bugs out, showing the tiles for a split second and then closing all together.
keep going..
Hello. I have been following dot OS for a long time. I've noticed that during both the trial of both stable and android pie .. The location is wifi hidden. I enter the user name and password manually, but does not recognize it. Although it appears to be a registered wifi network, the connection happens. everything is ok when wifi is removed from the modem interface. We wish to have a small share ..
Router bug
I noticed a bug when I try to connect the router along with the mobile data, it just does not turn on.
Good Job man, and thanks so much for this great ROM . You're the best.
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today.
We're mainly based on LineageOS so use custom kernels compatible with them!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Features
Click for feature list
What's working:
* WIFI
* NFC
* Bluetooth
* Fingerprint
* Camera
* Sensor
* Edge sense
* Call & SMS
* APN
* Wireless Charging
...........
Not woking:
* plz report me
First time installation or check latest build instructions:
Make sure your pc has adb environment and you have backed up the necessary data！！！
unlock the BootLoader
Flash the boot image file
Reboot recovery
adb sideload magisk or gapps
Wipe data, cache and format data
Boot crDroid and E N J O Y !
Download
Click here !
Maintainer's github
Lb9457
Thanks：
crDroid ROMs
Lineage OS
AOSP
ROM OS Version: 12L
ROM Kernel: android_kernel_google_msm-4.9
Status: Stable
OTA:not support(UNOFFICIAL)
Sec. Patches : 2022.03.05
Created : 2022.2.10
Last Updated : 2022.3.30
-----------------------------------------------------------------------------------------------
optional
-----------------------------------------------------------------------------------------------
Donwnload ➢GMS
Donwnload ➢Root
Donwnload ➢MicroG
Thanks for the ROM, gonna try it.
Downloading now.
So, I flashed with the above instructions and the phone is stuck on the crDroid animated boot logo.
Restarted a couple of times, did the same.
Then I again entered the recovery and did factory reset.
Worked like a charm.
I think you should add this to the flashing instructions too.
Setting up now.
Also @LB9457
What is this GMS is for and how to use it, I tried sideloading, it did not work.
33HdA said:
So, I flashed with the above instructions and the phone is stuck on the crDroid animated boot logo.
Click to expand...
Click to collapse
33HdA said:
So, I flashed with the above instructions and the phone is stuck on the crDroid animated boot logo.
Restarted a couple of times, did the same.
Then I again entered the recovery and did factory reset.
Worked like a charm.
I think you should add this to the flashing instructions too.
Setting up now.
Click to expand...
Click to collapse
sorry about this , But I've added instructions before.
33HdA said:
Also @LB9457
What is this GMS is for and how to use it, I tried sideloading, it did not work.
Click to expand...
Click to collapse
its magisk module ，dude
LB9457 said:
its magisk module ，dude
Click to expand...
Click to collapse
Yeah thanks, figured it out later.
Can you also share which Gapps should be installed. I have tried NikGapps, and MindTheGapps but both of them complain to have low storage and were not flashed.
33HdA said:
Yeah thanks, figured it out later.
Can you also share which Gapps should be installed. I have tried NikGapps, and MindTheGapps but both of them complain to have low storage and were not flashed.
Click to expand...
Click to collapse
Later updates will consider other gapps, and now the partition space is a problem and will be actively resolved later.
LB9457 said:
Later updates will consider other gapps, and now the partition space is a problem and will be actively resolved later.
Click to expand...
Click to collapse
Oh great thanks for the update, I would keep it using without the GApps.
I also noticed that the crDroid settings crash on Buttons and other options as well. Is there a fix ?
I already tried re-flashing.
33HdA said:
Oh great thanks for the update, I would keep it using without the GApps.
I also noticed that the crDroid settings crash on Buttons and other options as well. Is there a fix ?
I already tried re-flashing.
Click to expand...
Click to collapse
I uploaded a new version,you can try it.I only have crosshatch equipment and many blueline problems cannot be tested. This may be an official issue. The official version 8.2 has just been updated. Please be patient and wait for the update to resolve the issue.
LB9457 said:
I uploaded a new version,you can try it.I only have crosshatch equipment and many blueline problems cannot be tested. This may be an official issue. The official version 8.2 has just been updated. Please be patient and wait for the update to resolve the issue.
Click to expand...
Click to collapse
Thanks, I am trying to share as much as possible as this ROM has potential. I tested the new one, I have blueline and I can help test the ROM for you.
LB9457 said:
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today.
We're mainly based on LineageOS so use custom kernels compatible with them!
Features
Click for feature list
What's working:
* WIFI
* NFC
* Bluetooth
* Fingerprint
* Camera
* Sensor
* Edge sense
* Call & SMS
* APN
* Wireless Charging
...........
Not woking:
* plz report me
First time installation or check latest build instructions:
Make sure your pc has adb environment and you have backed up the necessary data！！！
unlock the BootLoader
Flash the boot image file
Reboot recovery
adb sideload
The magisk fix is already included in the boot image file, if you want to use root, please flash the boot image file again.
Wipe data, cache and format data.
Boot crDroid and E N J O Y !
Download
Click here !
GMS
(Magisk moudle)
Click here !
Contributors
Lb9457
Source Code: https://github.com/crdroidandroid/android/tree/12.0
ROM OS Version: 12.0
ROM Kernel: Linux 4.9.279
Status: Stable
OTA:not support(UNOFFICIAL)
Sec. Patches : 2022.02.05
Created : 2022.2.10
Last Updated : 2022.2.13
Click to expand...
Click to collapse
I've got a little testing done but no logs yet(I'll work on that later).
Active Edge works on every option, first try. Unfortunately, wifi breaks after flashing the magisk module. Also, settings crash in the crdroid menu but only Buttons, User Interface and Notifications.
Factory reset did not solve any problems, except the wifi issue but also removed the module so...
I'll see about getting the logs for you soon though and by the way, this is still awesome work. If it means anything, I would upgrade my 4a to this rom if I could. I've been holding off on flashing A12 because I wasn't blown away by it but this rom has changed my mind.
It's been a while since I've done this but I took two logs.
1 - Without gapps, checking the 'Notifications' and 'Buttons' in crDroid settings.
2 - After flashing provided boot image and installing magisk: attempted to connect to wifi. Tile said connected and SB icon showed connection but Chrome said there was no internet. Also, tried the crDroid settings again in 'User Interface'
Let me know if these logs are wrong or don't show anything and I'll try again. Like I said, it's been a while.
EDIT: It's not letting me attach both files but hopefully the second one gives you enough for the crDroid settings bug
Trying the no gapps one again.
EDIT: won't let me for some reason...
AlexKarimov said:
I've got a little testing done but no logs yet(I'll work on that later).
Active Edge works on every option, first try. Unfortunately, wifi breaks after flashing the magisk module. Also, settings crash in the crdroid menu but only Buttons, User Interface and Notifications.
Factory reset did not solve any problems, except the wifi issue but also removed the module so...
I'll see about getting the logs for you soon though and by the way, this is still awesome work. If it means anyth
Click to expand...
Click to collapse
LB9457 said:
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today.
We're mainly based on LineageOS so use custom kernels compatible with them!
Features
Click for feature list
What's working:
* WIFI
* NFC
* Bluetooth
* Fingerprint
* Camera
* Sensor
* Edge sense
* Call & SMS
* APN
* Wireless Charging
...........
Not woking:
* plz report me
First time installation or check latest build instructions:
Make sure your pc has adb environment and you have backed up the necessary data！！！
unlock the BootLoader
Flash the boot image file
Reboot recovery
adb sideload
The magisk fix is already included in the boot image file, if you want to use root, please flash the boot image file again.
Wipe data, cache and format data.
Boot crDroid and E N J O Y !
Download
Click here !
GMS
(Magisk moudle)
Click here !
Contributors
Lb9457
Thanks：
crDroid ROMs
Lineage OS
ROM OS Version: 12.0
ROM Kernel: android_kernel_google_msm-4.9
Status: Stable
OTA:not support(UNOFFICIAL)
Sec. Patches : 2022.02.05
Created : 2022.2.10
Last Updated : 2022.2.19
Click to expand...
Click to collapse
crDroidSetting force stop issue has been fixed！！！Plz try new version.
LB9457 said:
crDroidSetting force stop issue has been fixed！！！Plz try new version.
Click to expand...
Click to collapse
Amazing support. Will download and try.
Thanks for this.
LB9457 said:
crDroidSetting force stop issue has been fixed！！！Plz try new version.
Click to expand...
Click to collapse
Clean flashed android 12 then flashed latest build. The crDroid settings issue is fixed, both before rooting/gapps and after. Unfortunately, the wifi problem still persists. Wifi works perfectly before and after rooting but once gapps module is flashed, the wifi breaks. Phone says it's connected(status bar and tiles) but internet isn't available for Chrome or Play Store. Would it work to sideload gapps when first flashing ROM?
AlexKarimov said:
Clean flashed android 12 then flashed latest build. The crDroid settings issue is fixed, both before rooting/gapps and after. Unfortunately, the wifi problem still persists. Wifi works perfectly before and after rooting but once gapps module is flashed, the wifi breaks. Phone says it's connected(status bar and tiles) but internet isn't available for Chrome or Play Store. Would it work to sideload gapps when first flashing ROM?
Click to expand...
Click to collapse
the same happens with me and also with another member in the telegram group of pixel 3/xl. and he said about nikgapps having the same problem. he managed to flash in magisk using core litegapps, I'm still going to test...
"a goose:
Got network not working on any google apps after install gms module.. seems it's module issue since it based on nikgapps and the have that issue too"
AlexKarimov said:
Clean flashed android 12 then flashed latest build. The crDroid settings issue is fixed, both before rooting/gapps and after. Unfortunately, the wifi problem still persists. Wifi works perfectly before and after rooting but once gapps module is flashed, the wifi breaks. Phone says it's connected(status bar and tiles) but internet isn't available for Chrome or Play Store. Would it work to sideload gapps when first flashing ROM?
Click to expand...
Click to collapse
Its google captive portal. This issue has nothing to do with Rom and Gms, please go to the captive portal first.Please don't report this bug again and it's not a bug.
alexaandreb said:
the same happens with me and also with another member in the telegram group of pixel 3/xl. and he said about nikgapps having the same problem. he managed to flash in magisk using core litegapps, I'm still going to test...
"a goose:
Got network not working on any google apps after install gms module.. seems it's module issue since it based on nikgapps and the have that issue too"
Click to expand...
Click to collapse
I used litegapps in magisk, the configuration for the account appeared but when it comes to the network part, it does not continue the configuration, even using wifi/4g. I set it offline and entered the play store, put my account and got the play store logo and don't get out of it. I downloaded a newer version and it opened normally. I was going to try again from scratch if the configuration continues, I removed the lite module and restarted, it bootlooped.