Hi. English isn't my mother language.
but I really need help.
My phone is stuck in boot loop during my trip.
I really want to get back picture what I taken during trip.
I was using Zenfone 3 Laser from asus.
When I turn on my phone, it shows the screen like belows
---------------------------------------------------
Reboot into fast boot
press VOLUME keys
The dm-verity is not started in enforcing mode and may not work properly
To learn more, visit:
g.co/placeholder
---------------------------------------------------
and press volume key with connect via usb to computer.
I can see "asus android bootloader interface" on devices manager in computer.
and then
when I press volume key,
it shows "start, restart bootloader, recovery mode, power off"
and screen shows like below
----------------------------------------------------
Press volume key to select, and press power key to select.
Fastboot mode
Product_name -
Variant -
aboot version -
baseband version -
serial number
secure boot - enabled
device state - locked
prj_name :
prj_stage :
prj_sku :
prj_cpu:
prj_emmc :
prj _ddr:
-----------------------------------------
but only "power off" is working, other thing doesn't work.
and then go back to first step.....
What can i do?
I really get back my pic...
Related
I got a tablet device (Omega OT107) I've rooted it using
Code:
ro.kernel.qemu
method.
Next I'm triying to flash Custom Recovery and my problems started here.
What I've tried:
1.
Code:
flash_image recovery
- no success process of flashing never ends
2. Install bootmenu to /data/bootmenu
3. Installed 2 different 2Init's
None of this worked or even had an impact on how device works (it always boots in android correctly).
I've tried to boot it to fastboot mode to flash recovery from there but there is a problem that I have.
Volume(up or down) + Power buttons starts device to Android not to bootloader (I've read you need to remove and reinsert battery to make it work, but device has a build in batery and needs to be taken apart to remove it so I did not tryed it)
Code:
adb reboot bootloader
- boots to what I think is a bootloader (screen is black(no light is comming out of it)) when connected to Windows PC it is seen as Android Bootloader Interface (Android-SDK driver).
Code:
fastboot devices
does not discover any devices, clicking volume or power button does nothing.
Code:
adb reboot recovery
- boots devices it what seems to be useless recovery mode. At start there is a standing android dude with fireball on his chest, and imidietly changes to a lying position with his chest oppened and an exclamation mark comming out of it (I've red it is ok and I need to press Volume(down/up) + Power buttons to open recovery menu but it does not happen).
My question is:
Is it normal to some devices bootloader to look like mine? How to make it discoverable to fastboot?
I had this issue and I fixed with "press all the buttons!" and suddenly I sow recovery menu...to factory reset. if it doesn't work repeat with rebooting with pin
Does someone knows a way how to hard reset this thing?? ^^
about firmware
Any idea where find the firmware for this tablet?
Mine is now freeze on recovery logo
hard reset OT107
1.Turn off our tablet.
2 We press the MENU button at the same time + POWER HOUSE click and hold
3.Wait until the Android image.
4.Then VOL + button and the POWER and appears to us to Recovery Mode
5.Navigation is Vol-i + and confirmed by pressing POWER.
Hello Guys,
I am trying to boot 8552 into download mode but i am not able to enter.
This is what i did so far.
1: made sure USB Debugging is enabled
2: pressed power + volume down + Home till i enter odin, (never entered)
3: press power button till you get vibration and then press power + vol down + home will you see warning.
Above one actually works better then 2nd step. But as soon as i leave any key to press volume up, the cellphone reboots.
I have entered ODIN mode before, but it looks like i am not able to enter it since last samsung update.
Plus the last update unrooted my device
Same problem
Same problem here . I have tried to flash TWRP and bricked my phone. Whenever I've tried to enter download mode it enter into factory mode :crying:
Same Problem with me VolumDown+HOme+Power Button Turn my phone On not shows any Triangle
Hi,
My grandfather locked his chinese tablet without knowing how.
Each time we start the tablet we arrive on an input field asking for a password we don't have.
I can't found how to reboot in recovery, however I can boot to fastboot mode with power and vol up keys.
The tablet is branded as a Kliver Klipad KL3889, but there is no other information on the vendor website (klipad DOT fr)
The user manual only says A64 Quad Core CPU and Mali 400MP GPU.
The tablet is running Android 8.1 Go edition, and shows up as "Onda (unverified)" with 1f3a:1006 id according to lsusb command.
When booted in fastboot mode, it shows up with a different id on lsusb :
1f3a:1010 Onda (unverified)
I can not reach the tablet using adb, and when I tried a fastboot
reset using the following commands :
Code:
fastboot -i 0x1f3a erase cache
fastboot -i 0x1f3a erase data
fastboot -i 0x1f3a erase userdata
all I get is the following error :
FAILED (remote: :secure mode,fastboot limited used)
Click to expand...
Click to collapse
What are my options ? Is there a way to fully reset this device ?
perhaps web search: JTAG + tablet details. Some disassembly required. SuperUser has previously recommended Ort JTag.
Factory reset from recovery mode
AnierinB said:
Factory reset from recovery mode
Click to expand...
Click to collapse
As I previously said, I can't access recovery mode. I've tried all keys combinations I could find, and the only one working (Vol Up + power) boot into fastboot mode, not recovery mode.
yodazz said:
As I previously said, I can't access recovery mode. I've tried all keys combinations I could find, and the only one working (Vol Up + power) boot into fastboot mode, not recovery mode.
Click to expand...
Click to collapse
Hi , try this :
1) Turn off the tablet
2) Hold "Volume +" and turn on the tablet
3) Once you see KLIPAD logo on your display, release the "ON" button (or power) while holding "Volume +"
4) You must arrive on the Android logo, and you will probably get the message "No command"
5) You can let go of "Volume +"
And that's where it becomes interesting:
6) Press "ON" (or power), and while holding the button, a pulse on "Volume +"
7) You finally arrive at the menu of restoration
You navigate through the menu by means of the volume keys, and the "ON" (or power) button acts as validation.
Choose "data / factory reset", confirm
Then "reboot system now" and you're done, if that doesn't work try the same process just with VOl- , also what you can try is :
1. Turn off your device
2. Press and hold Vol - and power button , and once you see Logo , fast release both buttons and see if you are into Recovery mode.
Teddy Lo said:
Hi , try this :
1) Turn off the tablet
2) Hold "Volume +" and turn on the tablet
3) Once you see KLIPAD logo on your display, release the "ON" button (or power) while holding "Volume +"
4) You must arrive on the Android logo, and you will probably get the message "No command"
5) You can let go of "Volume +"
And that's where it becomes interesting:
6) Press "ON" (or power), and while holding the button, a pulse on "Volume +"
7) You finally arrive at the menu of restoration
You navigate through the menu by means of the volume keys, and the "ON" (or power) button acts as validation.
Choose "data / factory reset", confirm
Then "reboot system now" and you're done, if that doesn't work try the same process just with VOl- , also what you can try is :
1. Turn off your device
2. Press and hold Vol - and power button , and once you see Logo , fast release both buttons and see if you are into Recovery mode.
Click to expand...
Click to collapse
Thanks.
It works like you said until step 4 where I get the android logo, but no "No command" message.
Then when I hold ON button while pressing VOL+ it doesn't do anything.
Hello! i don't know how but my rooted Mi A3 last night decided on its own to update to Android 10. So i woke up with all of mine Magisk magic all gone. I tried to root again but my phone is stuck on the 'Mi' boot screen.
So here's the situation:
if i press volume up + power button, instead of entering recovery mode the "no Command" screen shows up;
if i try to fastboot, my pc doesn't recognize anymore my device;
There is any another way to enter recovery mode? Can i flash a boot image on a sd card? Do i have to throw away my beloved xiaomi?
You have most probably incompatible Magisk module which prevents phone from booting Android 10. Flash stock boot image to get phone working (fastboot should work, double check your drivers etc.).
Or perform factory reset from stock recovery:
"If presented with an image of a broken Android with "No Command" shown on the screen, do the following:
- Press and hold the Power button.
- While holding the Power button press the Volume Up button then release the Volume Up button then the Power button."
Guys, I'm in need of assistance, I've tried everything, even unlocked the OEM, and the USB debugging is on, but when I try to flash the TWRP recovery on Odin, the procedure fails and it shows a message on the phone saying, "CUSTOM BINARY (RECOVERY) BLOCKED BY OEM LOCK'.
Please, if anybody has a solution, it will really be appreciated.
1-Turn off the device.
2-press Volume Down + Volume UP + Connect the USB cable.
3-You will see a warning and under it three options (Volume up: Continue / Volume up long press: Device unlock mode / Volume down: Cancel restart phone.
4-Will choose Volume up long press: Device unlock mode.
5-Unlock bootloader page will appear, Under it are two options (Volume up: Yes / Volume down: No).
6-Press the volume up key.
The device will reboot and a message will appear telling you that the boot loader has been unlocked, Then press the power switch to continue.
7-Then press the power switch to continue.
8-The bootloader is unlocked, Done.