{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
* Your warranty is now void.
* I am not responsible for bricked devices, dead SD cards, corrupted partition, nuclear disasters
* Please do some research before using this mod!
* YOU are choosing to make these modifications,
* If you point the finger at me for messing up your device, I will laugh at you.This kernel will overwrite your system modulesThis kernel use Anykernel2 zip for maximum compatibility with all ROMs and your existing ramdisk
Do NOT flash this over other custom kernels! You should only flash Cherry kernel over the kernel that came with your ROM!!!...
VARIANTS SUPPORTED
J510FN
J510GN
J510MN
J510F
KERNEL INFORMATION
Built with: Linaro Toolchain 6.3.1
Kernel Base: J510FNXXU1APJ3
Linux Version: 3.10.94
REQUIREMENTS
Sansung Galaxy J5 2016
Official Touchwiz stock rom 6.0.1
Stock kernel
TWRP
FEATURES
Kcal Color Control
Dynamic Fsync 2.0
Power Suspend 1.7
Quick Wake Up
USB Fast Charge
Disable Software CRC for 30% more performance
iosched (zen, vr, sio, sioplus, fiops, noop, cfq, deadline, row, bfq)
TCP Congestion algorithms
Westwood
Reno
Bic
Cubic
Highspeed
Hybra
Htcp
Vegas
Veno
Scalable
Lp
Yeah
Illinois
Prima Wlan Drivers 3.0.11.68
Frandom
Selinux Switchable
Kernel same-page merging (KSM)
Hotplug ( alucard, intelliplug, bricked hotplug, msmhotplug)
Governors (Alucard, Intelliactive, Barry Allen, interactive, ondemand, conservative, userspace, powersave, performance)
GPU overclocked to 720Mhz
CPU overclocked to 1881Mhz
Sound control 3.6
Intelli Thermal
CREDITS:
@Droidzone @The Sickness @faux123 @savoca@Franciscofranco@anarkia1976@Alucard@Bulgaricus@Lemlis
Click to expand...
Click to collapse
To do list:
Governors
Click to expand...
Click to collapse
DOWNLOAD
1.1.3 | 1.1.4
1.1.5_stock | 1.1.5_over
J510FN Full support
J510FQ Untested
J510GN Verified
J510F Verified
J510G Untested
J510H tested
J510S Untested
J510K Untested
J510MN verified
J510L Untested
J5108 tested
J510Y Untested
XDA:DevDB Information
Cherry Kernel [J5 2016], Kernel for the Samsung Galaxy J5
Contributors
Demicro
Source Code: https://github.com/Demicro/SM-J510FN_KERNEL
Kernel Special Features:
Version Information
Status: Beta
Current Stable Version: 1.1.3
Stable Release Date: 2017-01-26
Current Beta Version: 1.1.5
Beta Release Date: 2017-04-02
Created 2017-02-20
Last Updated 2017-04-02
Changelog
XX/xx/2017 v1.1.6 beta version
Upgrade to linux 3.10.94 ----(*)-----
Wlan driver upgrade to 3.0.11.68 -----(*)-----
J5 2015 FN support -------(*)------
Updated ZRAM driver -----(*)-----
Updated F2FS driver -----(*)-----
08/04/2017 v1.1.5 beta version
Upgrade to linux 3.10.94
Enable triple framebuffer
Adreno Idler 1.1
GPU Bus Vector Optimization
More A53 ARMv8 optimizations
New Adreno Blobs drivers (3D performance)
Wlan driver upgrade to 3.0.11.68
init.d support
CM Live display alongside with kcal thanks to @flar2 ?
remove Knox
Android logger on/off
CPU and GPU overclock 1.4 Ghz 550 Mhz
toggle for wakelooks
Patched cdrom code (DriveDroid support)
zzmove governor
20/02/2017 v1.1.4 beta version
Upgrade to linux 3.10.62
XZ Kernel Compression
-Ofast Optimization
linaro 6.3.1
Governors
lionfish governor
alucard governor (LG G5 import)
intelliactive governor
IO schedule
BFQ
F2FS Support
Call Recording
Dynamic management of dirty page writeback
Asynchronous I/O latency to a solid-state disk greatly increased
Battery charge control
Fsync toggle on/off
Asynchronous Fsync (HTC)
Intelliplug 4.0
Intellithermal
Dynamic Fsync 2.0
CPU overclocked to 1401Mhz
Revert GPU OVERCLOCK to 400 The max frequency cap is ignored and is always 720 (bug)
LCD notify
26/01/2017 v1.1.3
GPU overclocked to 720Mhz
CPU overclocked to 1881Mhz
Sound control
Anykernel installer mod
- Added function to automatically find the boot partition
- Added properties file to modify build.prop
24/01/2017 v1.1.2
Upgrade to 3.10.50
Barry Allen governor
Hotplug (alucard, intelliplug, MSM hotplug, Bricked hotplug)
Demicro said:
??
Click to expand...
Click to collapse
Slow but sure, all J5 variant will get development!
Good job!
vaserbanix said:
Slow but sure, all J5 variant will get development!
Good job!
Click to expand...
Click to collapse
It saddens me a bit to see how this range of Samsung phones has little development. Despite my little knowledge of C and the difficulty I had when I started to build the kernel thanks to the guides of @Droidzone and @The Sickness I was able to compile it and thus to contribute a grain of sand in this section.
Demicro said:
It saddens me a bit to see how this range of Samsung phones has little development. Despite my little knowledge of C and the difficulty I had when I started to build the kernel thanks to the guides of @Droidzone and @The Sickness I was able to compile it and thus to contribute a grain of sand in this section.
Click to expand...
Click to collapse
keep it up and dont give up!
Color OS Galaxy J5
Good to see some love for the 2016 version ? keep it up!
Do this for J510H and J510F!
And I wait for overlock.
Do the fast charge works good?
waiting for j510gn . alrdy flash . all good except wifi ...
Demicro said:
[KERNEL][6.0.1][J510FN][Linaro 4.9] Cherry Kernel
Click to expand...
Click to collapse
Thank you for your work.J510FN-everything works.
(Small bug WI-FI .after turning of wi-fi,or after reboot --need to enter wi-fi password again.)
How to fix look here
wait for Overclock ,Hotplug (alucard, intelliplug, msm hotplug, bricked hotplug) ,Governors :good:
Wifi doesn't work!! Please help!
J5 2016 510FN
lemlis said:
Thank you for your work.J510FN-everything works.
Small bug WI-FI .after turning of wi-fi,or after reboot --need to enter wi-fi password again.
wait for Overclock ,Hotplug (alucard, intelliplug, msm hotplug, bricked hotplug) ,Governors :good:
Click to expand...
Click to collapse
The problem with Wi-Fi is because of the secure storage that makes Wi-Fi forget passwords, that does not happen with open networks
ro.securestorage.support=false
in /system/build.prop
Change the value to false to turn it off
RicardoArantes said:
Wifi doesn't work!! Please help!
J5 2016 510FN
Click to expand...
Click to collapse
Could you give me more information about the problem?
Demicro said:
ro.securestorage.support=false
in /system/build.prop
Change the value to false to turn it off
Click to expand...
Click to collapse
:good: Now wi-fi works great
Ruch06 said:
Do this for J510H and J510F!
And I wait for overlock.
Do the fast charge works good?
Click to expand...
Click to collapse
It is only for the J510FN version
I have not tested the fast charge yet
Demicro said:
Changelog
Version 1.1.2
Upgrade to 3.10.50
Barry Allen governor
Hotplug (alucard, intelliplug, MSM hotplug, Bricked hotplug)
Click to expand...
Click to collapse
:good: Works great
Demicro said:
*USB fast charge
Click to expand...
Click to collapse
Plz explain it . How fast we can charge ?
s10gopal said:
Plz explain it . How fast we can charge ?
Click to expand...
Click to collapse
This option allows some cheap chargers over 500ma to be recognized as AC chargers for faster charging.
itmesepulll01 said:
waiting for j510gn . alrdy flash . all good except wifi ...
Click to expand...
Click to collapse
You flash the kernel in your J510GN?
Demicro said:
You flash the kernel in your J510GN?
Click to expand...
Click to collapse
yup
itmesepulll01 said:
yup
Click to expand...
Click to collapse
Everything works well except Wi-Fi?
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Phoenix Kernel
Phoenix -Kernel For Optimus L7 II (vee7)
P710-P714
Features
Based on the STOCK Source v10a from LG
Toolchain: Built with GCC 4.7 toolchain from SABERMOD
Linux: 3.4.0
Swap
zRam Support: support for zRam memory compression
KSM: Kernel Same-page Merging enable
Dynamic Fsync: Faux123's Dynamic File Sync v1.2
ARM optimizations
Fast Charge: chad0989 fast_charge driver, allowing to set the amperage of the charger or USB port your device is plugged-in to (default disabled)
Lowered swappiness (60 -> 45)
Optimized AES and SHA1 routines for ARM cpu architecture
Optimized SLUB memory allocator
Optimized ARM RWSEM (read/write semaphore)
Fast Random generator (frandom) support
Optimizations: Built with -O2 and many optimization flags
Intelliplug 3.8 thanks faux123 (Ecomode (more battery saving))
Governors:
- SIO (SImple Ondemand)
- Interactive
- Conservative
- Ondemand
- Userspace
- Powersave
- Performance
Additional Governors:
- SmartassV2
- Badass
- Lionheart
- Lagfree
- PegasusQ
- OndemandX
I/O Schedulers:
- Noop
- Deadline
- CFQ
Additional I/O Schedulers:
- SIO (SImple Ondemand)
- Fiops
Click to expand...
Click to collapse
The REQUIREMENTS
A unlocked bootloader
Custom Recovery CWM/PHILZ/TWRP
A brain with the ability to read
The will to recycle your warranty papers
The INSTRUCTIONS
Copy the zip to your sdcard
boot into recovery
flash the zip
reboot
enjoy
What is Intelli_plug and Ecomode? From FAUX123
Intelli_plug. Intelli_plug is a generic ARM SOC cpu hotplug driver. This is a COMPLETE replacement for Qualcomm's proprietary make poor decision. Intelli_plug has built-in Eco Mode support (Eco Mode is a optimized dual core solution for quad-core SOC like the Qualcomm S4-pro. This should allow for Maximum battery life without sacrificing performance). Because intelli_plug is a generic hotplug cpu driver, it will work with ALL CPU governors from conservative, ondemand, interactive and intellidemand and Eco Mode is available for ALL cpu governors as well!!!!
intelli_plug is automatically enabled when mpdecision is disabled.
Click to expand...
Click to collapse
The THANKS
faux123
srfarias
gokhanmoral
markus-oberhumer
ariava
paolo-github
CastagnaIT
tiny4579
flar2
special thanks to Mario Rodriguez Castro for being my tester
Do you like my Kernel? use this buttons for support me
DOWNLOAD
Phoenix-V1
Phoenix-V2
Fanpage: like = future project
https://www.facebook.com/Phoenix-DEV-1719991991571980/
XDA:DevDB Information
Kernel Phoenix, Kernel for the LG Optimus L7 II
Contributors
chijure
Source Code: https://github.com/chijure/android_kernel_lge_vee7
Kernel Special Features: UV, Fast Charge, Swap, Zram, KSM, Dynamic Fsync, F2FS, Frandom, , SIO, VR, FIOPS, Intelliplug, BFQ, ...
Version Information
Status: Stable
Current Stable Version: 02
Stable Release Date: 2015-08-10
Created 2015-07-15
Last Updated 2015-08-10
CHANGELOG
CHANGELOG
2015-07-11 Phoenix v1
Initial relase
USB force fast charging
updated libraries with optimized kernel functions
updated LZO algorithms
ARM unaligned access enabled
FIOPS I/O schedulers added
SIO I/O schedulers added
Enable Deadline
Add /dev/frandom support
Add dynamic sync control
compiled with GCC 4.7
2015-08-10 Phoenix v2
Add governor SmartassV2
Add governor Badass
Add governor Lionheart
Add governor Lagfree
Add governor PegasusQ
Add governor OndemandX
zcache/zram: add support for ARM, MIPS, SUPERH
Squash Intelli_plug 3.8 from faux123
I have Purified v1 ROM, LG P710. Can I install this kernel? Thank you.
krnjinac said:
I have Purified v1 ROM, LG P710. Can I install this kernel? Thank you.
Click to expand...
Click to collapse
Yes [emoji4] It works on all stock-based roms 4.1.2
Enviado desde mi XT1032 mediante Tapatalk
Gonna test it right now
Can I?
Hey you guys ! thanks! great job ! , I have a question, can I install it if I'm using the amigakitkat rom? Pls Help me!
Read carefully before asking. The title of the thread itself says 4.1.2 which is JellyBean. Amiga KitKat is... well... KitKat(4.4.x) obviously. This kernel is for 4.1.2 JellyBean only.
Good job man
I have some buttons fails sometimes when I use any app, here a log bellow:
gohaz0331 said:
I have some buttons fails sometimes when I use any app, here a log bellow:
Click to expand...
Click to collapse
that variant of the L7 II has ?? example p710
chijure said:
that variant of the L7 II has ?? example p710
Click to expand...
Click to collapse
I have the p714 (single sim version without nfc).
gohaz0331 said:
I have the p714 (single sim version without nfc).
Click to expand...
Click to collapse
I have the p714 also and I have no errors
Hello everyone. What's the difference in stability and performance with this kernel and this one by Airidosas? Can't test right now,but interested =)
Thanks for you work and time.
I have a question, how to enable zRAM? I tried with Kernel Adiutor but i can't enable this option.
Greetings from Mexico and sorry for my bad English.
DS_katauri said:
Hello everyone. What's the difference in stability and performance with this kernel and this one by Airidosas? Can't test right now,but interested =)
Click to expand...
Click to collapse
This kernel already has all the of Airidosas but with more features
raffles496 said:
Thanks for you work and time.
I have a question, how to enable zRAM? I tried with Kernel Adiutor but i can't enable this option.
Greetings from Mexico and sorry for my bad English.
Click to expand...
Click to collapse
Sorry my mistake is in v1 that is already fixed in V2 thanks
chijure said:
This kernel already has all the of Airidosas but with more features
Click to expand...
Click to collapse
Well,v1 was discharging a bit faster,gonna try v2 today. A noob question,will it support dual sim revision of LG L7 ll? As i noticed there actually arent modern optimised kernels for dual sim. And a second one,overclock is still impossible?
DS_katauri said:
Well,v1 was discharging a bit faster,gonna try v2 today. A noob question,will it support dual sim revision of LG L7 ll? As i noticed there actually arent modern optimised kernels for dual sim. And a second one,overclock is still impossible?
Click to expand...
Click to collapse
The support for dual version of L7 II (P715) will do for v3, whether it is possible to overclock mmm .. it is a bit tricky to find no information processor using L7 II MSM8625 (Snapdragon 200) on how I'm testing it stable with changes kernels with HTC DESIRE X but I can not promise anything to reward the overclock I'm adding the best features for better device performance
chijure said:
Sorry my mistake is in v1 that is already fixed in V2 thanks
Click to expand...
Click to collapse
Thanks for you support.
Now used v2 but again ZRam no work, i tried with ZRam Settings and Kernerl Adiutor apps from Play Store. I need app in specific for ZRam enable?
Also only i see available some governors.
Sorry for the troubles and bad English, greetings from Mexico.
Enviado desde mi LG-P714 mediante Tapatalk
chijure said:
The support for dual version of L7 II (P715) will do for v3, whether it is possible to overclock mmm .. it is a bit tricky to find no information processor using L7 II MSM8625 (Snapdragon 200) on how I'm testing it stable with changes kernels with HTC DESIRE X but I can not promise anything to reward the overclock I'm adding the best features for better device performance
Click to expand...
Click to collapse
Actually Lg l7 II is using MSM8225 aka Snapdragon S4 Play
Code:
[COLOR="green"][B]/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards, dead cats,
* thermonuclear war, or you getting fired because the alarm app failed.
* YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will go
* #Berserk :D:D
*/[/B][/COLOR]
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
FEATURES:
Unlocked CPU frequency to 1.4GHz
Unlocked GPU frequency to 465MHz
Available CPU governors: adaptive, darkness, smartmax, elementalXv2, zzmoove, impulse, despair, lionfish, barry_allen, ondemand, bioshock, interactive and performance
Available I/O Schedulers: noop, deadline, row, sio, sioplus, vr, tripndroid, cfq, bfq, fiops, and zen
Available CPU hotplugs: mpdecision, zen decision, msm, mako, state helper and msm sleeper
Vibration intensity control
Faux sound control 3.6
Dt2w support
DriveDroid support
Multirom support
KCAL advanced color control
Fsync on/off support
Advanced TCP congestion algorithms: cubic, reno, bic, westwood, highspeed, hybla, htcp, vegas, veno, scalable, lp, yeah and illinois
Exfat 1.2.9 support
NTFS R/W support
State notifier
Adreno idler
HID USB Keyboard & Mouse support (Download this app )
USB fast charge
Optimized KSM
Frandom
for more check my github commits
INSTALLATION INSTRUCTIONS:
Download the zip file and save it into the root directory of internal/external storage
Reboot into recovery
Mount system, data and cache
Flash the zip and reboot(NO NEED TO WIPE CACHE AND DALVIK)
OPTIMAL SETTINGS:
Optimal settings for balanced performance and battery life:
CPU frequency:- 200MHz to 1.2GHz
GPU frequency:- 100MHz to 310MHz
CPU governor:- impulse/interactive anyone you wish
Hotplug:- zen decision
TCP:- Westwood
Vibration intensity:- 50%
KSM:- enabled
Screen:- set preset to DeepBlack Colorful[This is optional but it makes screen color crispy]
Optimal settings for performance during gaming:-
CPU frequency:- 400MHz to 1.4GHz
GPU frequency:- 100MHz to 465MHz
FAQs:
Q. what is the difference between your normal and jerrica builds?
A. normal build is based on official CM source and jerrica is based on premaca's official xiaomi source
Q. why CPU frequencies are not changing even after setting min and max values in kernel adiutor?
A. simple go to hotplugs, disable mpdecision and enable some other hotplug
Q. why is charging so slow?
A. sorry can't help I never faced this issue, even with stock cm13 kernel my device gets charged within 2hrs
one thing I can suggest is stick to a ROM for a week
by sticking to a ROM I mean don't even flash nightlies
Q. what is drivedroid?
A. DriveDroid is an Android application that allows you to boot your PC from ISO/IMG files stored on your phone.
more info here: http://softwarebakery.com/projects/drivedroid
Q. okay you have given us a balanced profile what about a battery oriented profile?
A. sorry, with the settings I have given above I already get 5-6hrs of SOT which is optimal for a 2200mAh battery, so if you are asking about a profile which will give about 7-8hrs of SOT stop dreaming.
CREDITS:
Thanks a lot to these super awesome developers from whom I kanged the features:
DespairFactor
neobuddy89
faux123
franciscofranco
ak
savoca
premaca
dorimanx
jcadduono
arter97
psndna88
myfluxi
osm0sis
pelya
flar2
zanezam
placiano
sultanqasim
jamison904
javilonas
Cl3Kener
bbedward
andip71
varunchitre15
imoseyon
FrozenCow
Thanks a lot to my awesome testers:
@Salahxda6805
@Zeus™
@shah2007
@Shubhamfame
@sumitkolhe37
@parvejsolkar
@HRS24X7
XDA:DevDB Information
Berserk Kernel, Kernel for the Xiaomi Redmi 2
Contributors
Ashish94, ketut.kumajaya
Source Code: https://github.com/AshishM94/android_kernel_wingtech_msm8916
Kernel Special Features:
Version Information
Status: Stable
Stable Release Date: 2016-07-18
Created 2016-02-28
Last Updated 2016-07-18
Review.
Here is my review after testing it for 3 days :
Selinux - Permissive (Doesn't break ViPER4Android /Sound mods)
All sensors work fine (Including Yas sensor)
Great Multitasking (Heavy Games like Asphalt8, MC-Blackout run smooth)
Overclocked to 1.4 Ghz.
Lots of Cpu Governers, Hotplugs & I/O schedulers to choose from.
Good Battery life (After all these features)
Undervolted, Powersuspend.
Can be used as Usb keyboard/mouse.
No Lag, No Overheating.
Latest Linux Version.
Overall this is the best kernel till date for all the marshmallow RoMs of Xiaomi Redmi 2.
With a these variety of governers and a lot other things, this kernel also provides good battery life(You cant expect more than this from a 2200 mAh device)
I would suggest this kernel to all the redmi 2 users who haven't tried it yet....
and at last its a great work from @Ashish94 (Considering its his first kernel, then its awesome! )
Zeus™ said:
Dowload Link ??
Click to expand...
Click to collapse
Download tab. Open link through chrome.
Sent from my 2014818 using Tapatalk
Gud kernel without lag and better battery and gud features nice work done bro @Ashish94 :thumbup::thumbup::thumbup::thumbup::thumbup:
---------- Post added at 04:47 PM ---------- Previous post was at 04:46 PM ----------
[/COLOR [MENTION=6952478 [user=6952478]@Ashish94[/user][/MENTION] it will be easy if ull add download link in description
Ashish94 said:
This is my "berserk kernel" for Redmi 2. It consists of all the latest changes from kumajaya's kernel sources and upstreamed linux kernel sources from kernel.org along with cherry-picks from some of the greatest xda kernel developers sources.....
Click to expand...
Click to collapse
finally a new kernel >>
>> the existing ones (GK, RR) break my favorite sound mod (EXTREMEMusic), so I got stuck with ImmortalKernel; which is good but lacks a lot of the features you included :good:
eager to test it!
(bliss 6.1; MM 6.0.1)
any redommended/suggested settings?
crullick said:
finally a new kernel >>
>> the existing ones (GK, RR) break my favorite sound mod (EXTREMEMusic), so I got stuck with ImmortalKernel; which is good but lacks a lot of the features you included :good:
eager to test it!
(bliss 6.1; MM 6.0.1)
any redommended/suggested settings?
Click to expand...
Click to collapse
These are my personal settings -
Cpu: 200mhz-1.2ghz
Governor: impulse
Hotplug: Intelliplug
Fsyncn
Dynamic fsync: on
Test and give your feedback.
Happy flashing [emoji1] [emoji1]
Sent from my 2014818 using Tapatalk
Charging slow or battery going from 15% to 0% in one second?
JoaoMarcos said:
Charging slow or battery going from 15% to 0% in one second?
Click to expand...
Click to collapse
Slow charging fast charging varies from user to user some are getting 1000mA and some are getting 500mA(including me). No such bug as going from 15-1% in 1sec.
Sent from my 2014818 using Tapatalk
Ashish94 said:
Slow charging fast charging varies from user to user some are getting 1000mA and some are getting 500mA(including me). No such bug as going from 15-1% in 1sec.
Sent from my 2014818 using Tapatalk
Click to expand...
Click to collapse
Okay. I'm asking because in Temasek CM13 with his kernel, I got these two annoying bugs. I was getting 50 mA in idle, with no CPU load :/
nice and good kernel with lots of features
Best kernel in Redmi 2
But i got stability issues, little lag when pulling notification qs and opening new app.
maybe because the sabermod toolchain
My setup
Gov : elementalx
boost interval : 10ms
input boost interval : 10ms
hotplug : intelliplug
io internal : fiops 128kb
io external : fiops 1024kb
ichihara.rifa said:
Best kernel in Redmi 2
But i got stability issues, little lag when pulling notification qs and opening new app.
maybe because the sabermod toolchain
My setup
Gov : elementalx
boost interval : 10ms
input boost interval : 10ms
hotplug : intelliplug
io internal : fiops 128kb
io external : fiops 1024kb
Click to expand...
Click to collapse
Okkk bro will tell the dev to look into it:thumbup:
ichihara.rifa said:
Best kernel in Redmi 2
But i got stability issues, little lag when pulling notification qs and opening new app.
maybe because the sabermod toolchain
My setup
Gov : elementalx
boost interval : 10ms
input boost interval : 10ms
hotplug : intelliplug
io internal : fiops 128kb
io external : fiops 1024kb
Click to expand...
Click to collapse
A little lag jitter will always be there irrespective of any kernel any rom you use. Try more tinkering with kernel settings and use the setting that suits you.
Thanks for your feedback. [emoji106] [emoji106]
Sent from my 2014818 using Tapatalk
The download link cannot be opened
Sent from my 2014817 using Tapatalk
Great Kernel works with aosp roms too.
are bhai @Ashish94 Download Kaise Karu ?? Where Link ?
omkarsnehal said:
are bhai @Ashish94 Download Kaise Karu ?? Where Link ?
Click to expand...
Click to collapse
Open thread with chrome or any other browser and go to downloads tab. Also no hindi please.
Sent from my 2014818 using Tapatalk
Wow cool!
Btw, how to restore stock kernel?
Thanks for your hard works, sir!
my573r10us said:
Wow cool!
Btw, how to restore stock kernel?
Thanks for your hard works, sir!
Click to expand...
Click to collapse
Did you make a backup of the old kernel?? If not open the zip package of your rom with winrar or any other compression software and extract boot.img from it. Now flash this boot.img with flashify or twrp. Done you are back to your old kernel.
Sent from my 2014818 using Tapatalk
some one plz upload link coz im not understand what he saying
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Disclaimer
Code:
/*
* Your Warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards, dead dogs, or cats,
* but i'm very interest in thermonuclear war, so if you point the finger
* at me for messing up your device just because this kernel, I will
* send you to the mars with Nuclear Rocket. Act accordingly.
* I know this paragraph is conspiracy-included, so
* dont ask about it. Welcome.
*/
this kernel is based on kernel source by kumajaya, branch cm-13.0-wt88047So it just for Marshmallow ROM ONLY
About
Undine-X is my customized Kernel for Wingtech wt88047 a.k.a Xiaomi Redmi 2 with lots of new features.
I started learning about compiling android kernel in mid-March, inspired by some of modified kernel in this device.
Now I'm using kumajaya's kernel source with cherrypicks from some of the greatest XDA kernel developers sources.
Cross-compile
Compiled with HyperLinaro 5.1 Toolchain
Using -Ofast Optimization Flags
Features
MSM Limiter
Power Suspend Mode
Overclock CPU to 1.4GHz
Adreno Idler
MSM Hotplug, Mako Hotplug, and Intelliplug
New CPU Governor : impulse, lionfish, bluactive, darkness, elementalx, nightmare, zzmoove, yankactive
New I/O Scheduler :tripndroid, zen, sioplus, fiops
Advanced TCP Congestion Algorithm
USB Fast Charging (no more slow charging when charging in computer)
Double Tap 2 Wake
Vibration Control
Asynchronous Fsync
KCAL Display Color Control
and moar .....
Installation
Download the zip file
Reboot to your recovery (I'm suggested yo to INSTALL TWRP 3.0.0 to make sure aroma running properly)
BACKUP your BOOT partition (to make it safe so your can easely restore if found any critical problem)
Install the zip file
Choose your preferred options (cpu min/max, governor, selinux mode, etc)
Reboot to system
Preferred Kernel Tweaker App
ReModded Singularity Kernel Adiutor, Download it at my GDrive
NOTE
If you getting some problem,
Send me your log files or I can't help you. Thanks.
/sys/fs/pstore/console-ramoops
/sys/fs/pstore/dmesg-ramoops
Doubletap2wake & Sweep2wake Preview
XDA:DevDB Information
Undine-X Kernel, Kernel for the Xiaomi Redmi 2
Contributors
ichihara.rifa
Source Code: https://github.com/harukachan/UndineX_XR2
Kernel Special Features: Overclock, Aroma Installer, Double Tap 2 Wake, Sweep 2 Wake, Power Suspend, MSM Limiter
Version Information
Status: Stable
Current Stable Version: 1.3.0
Stable Release Date: 2016-04-16
Created 2016-03-27
Last Updated 2016-09-20
Reserved
Download Links
codeharuka-UndineX-1.3.0.zip
ReModded-SKA-20160417.apk
Changelogs
v1.3.0
[new] MSM Limiter v4.0
[changed] Turn down charger rate to 1100 mAh (Avoid hardware issue)
[changed] Some Improvement in UKSM
[changed] Revert Max CPUFreq to 1.4GHz
[removed] Intelliactive Governor (Still not worth for msm8916)
[removed] FauxSound Sound Control (because very buggy)
[changed] Some Improvement in Aroma Installer Themes
[changed] Some Improvement From Cyanogenmod
v1.2.1
[changed] Fix CPU Frequencies Table
[changed] Unlock GPU Frequencies to 720MHz
[changed] Improving I/O latency
[changed] Implement powersuspend to doubletap2wake and sweep2wake
v1.2.02-sid
[new] Unlock GPU Frequencies up to 720MHz
[changed] Fixed Initscript, CPU Frequencies Table, and more, to fix random reboot problem.
v1.2.01-sid
[new] UKSM v1.2.3 (Ultra-Kernel Samepage Merging From http://kerneldedup.org/) This feature make your ram more efficient and more fluid.
[new] Sweep2wake Feature (From Bricked-Mako Kernel by @show-p1984)
[new] Implement Cryptography for LZ4 from berserk @Ashish94
[new] Implement Frandom from berserk @Ashish94
[new] Enable/Disable CRC Scanning (from https://github.com/boype/kernel_tuna_kk44)
[changed] Unlocked CPU Frequencies up-to 1.6 GHz
[changed] Now hwkeys are not active when in suspend mode. Patch from TeslaROM Kernel Source @premaca
X1.1-6-H2O
[new] MDSS Color Control (Formerly KCAL)
[changed] Fix CPU Frequencies tables that can't ramp up to 1.4GHz
[changed] Fix touchscreen random not responding when doubletap2wake activated.
X1.1-4-H2O
[changed] fauxsound: removing all mic tuner to fix low output from microphone during calls (thanks @akash akya)
[changed] touchscreen: add resume when doze (thanks @pirej @zwliew)
[new] installer : add Balanced Preset for new user (when still confuse about setup)
X1.1-2-H2O
[changed] now config restoration placed in ramdisk instead of init.d, to make it still working if the rom not support init.d
[new] Mako hotplug and Intelliplug
[changed] Now the kernel compiled with Hyper Linaro Toolchain GCC 5.1
[new] Add Asynchronous Fsync
X1.1-0-H2O :
Initial publish on XDA
Can i test this with Tesla OS?
Just tried Elix1r, flashed zip and tried fastboot flashing, rom 100% clean and it didn't work.
hardsonic said:
Can i test this with Tesla OS?
Just tried Elix1r, flashed zip and tried fastboot flashing, rom 100% clean and it didn't work.
Click to expand...
Click to collapse
I'm just test on cm13 and aokp only. but you can try it.
don't forget to backup boot partition before flash it.
YACK
Finally made it through xda .. can i request more hotplug .. hehe
please add mako hotplug pleasee.
inpamcoxie said:
YACK
Finally made it through xda .. can i request more hotplug .. hehe
please add mako hotplug pleasee.
Click to expand...
Click to collapse
Added to the my plan
Thanks for suggestion
Great work!
It's raining Kernels for our little precious...
Kudos to all devs ?
more in our phone's development... great news
everything seems good ..but cpu cannot reach 1.4ghz even when the governor was set to performance..other than that its good..pls keep up the effort..
btw i m using tesla rom
ibal97 said:
everything seems good ..but cpu cannot reach 1.4ghz even when the governor was set to performance..other than that its good..pls keep up the effort..
btw i m using tesla rom
Click to expand...
Click to collapse
Thanks for review
imo it's not really "cant reach",
but it optimized so cpu load is still under 1.4ghz.
Performance governor ramp up your CPU at the highest value, it doesn't matter were you are in game or just playing music.
ichihara.rifa said:
Thanks for review
imo it's not really "cant reach",
but it optimized so cpu load is still under 1.4ghz.
Performance governor ramp up your CPU at the highest value, it doesn't matter were you are in game or just playing music.
Click to expand...
Click to collapse
ohh...now i understand.. thanks for the kernel
Thanks イチハラ リファ(Katakana lol) for implementing dt2w. I find it interesting on how you implementing fastcharging in your kernel and wonder does the charging stay at a consistent rate of 1500mA ? Can anyone test it out?
nick37332001 said:
Thanks イチハラ リファ(Katakana lol) for implementing dt2w. I find it interesting on how you implementing fastcharging in your kernel and wonder does the charging stay at a consistent rate of 1500mA ? Can anyone test it out?
Click to expand...
Click to collapse
it depend on hardware, i mean i'm just trying to combine usb fstchg patch with more value at max volt.
well i'm still not tried about it because i dont have tc adaptor that larger than 1000mA :laugh:
lol my english is very bad :laugh:
Good to see the development of redmi 2 now.
Kernels are coming like rain!
Development like this seems unbelievable!
Cheers
-Sourav_8434
nick37332001 said:
Thanks イチハラ リファ(Katakana lol) for implementing dt2w. I find it interesting on how you implementing fastcharging in your kernel and wonder does the charging stay at a consistent rate of 1500mA ? Can anyone test it out?
Click to expand...
Click to collapse
Well I used the Ampere app, the max.amount of current I got was 1010mAh , with constant values revolving around 700-800mAh. Others can also check. I'm using the stock charger.
After install the kernel I can't unlock my phone, I'm using pattern unlock. Everytime that I try to unlock a black screen appears and go back to unlock screen.
I had the same problem with latest version of octopus kenel and I have to use and old version.
Any idea how to fix this problem?
Enviado desde mi Mi-4c mediante Tapatalk
siba01 said:
After install the kernel I can't unlock my phone, I'm using pattern unlock. Everytime that I try to unlock a black screen appears and go back to unlock screen.
I had the same problem with latest version of octopus kenel and I have to use and old version.
Any idea how to fix this problem?
Enviado desde mi Mi-4c mediante Tapatalk
Click to expand...
Click to collapse
I will look into that,
temporary, you can disable dt2w.
ichihara.rifa said:
I will look into that,
temporary, you can disable dt2w.
Click to expand...
Click to collapse
Yup... dt2w is the one causing this problem... the touchscreen doesnt seem to wakeup from touch inputs
Update X1.1-2-H20 [new compiler and hotplug]
Changelogs at first page :laugh:
Ayy my minus is now increased, lmao
no kernel-bugs-related so far....
[i'm more than a noob when it comes to kernel]
this is the only one that made my 紅米2 react properly on dt2w
(feature i missed the most, and coming back big style) {still waiting for a stable berserk to be honest}
8 stars (out of 5) for the looks/user/aroma approach - specially for people not using kernel managers (i'm not 1 of those, but solidarity is important)
has every other "crowd pleasers" working except for control freaks (just kidding) + screen/color profiles << this is not a plea
++ having an option for color-profile would imho make it more than awsome......
great work, even greater kernel, thank you
tipsy by @premaca
recommended settings more than appreciated
[KERNEL][G900F][STOCK][TW6.0.1] 🌟Neox🌟 Kernel UBERTC 7.0.0 Zram Zswap Zcache
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Kernel Based on [Samsung Stock M/LP] Boeffla-Kernel (14-07-2016)
For Setup kernel: kernel-adiutor-0-9-9-4-android-apk-download
or :
This version use part of RamDisk of the Boeffla-Kernel and use Boeffla-Config V2 app
Kernel Version 1.4:
Kernel works on :
STOCK ROM TW 6.0.1 (tested on G900FXXU1CPEM)
PhoeniX ROM V12.0 MM 6.0.1[Aroma Installer]
xXx No Limits 5.0
v1.3
Based on [Samsung Stock M/LP] Boeffla-Kernel (14-07-2016)
New Toolchain...
UBERTC gcc version 7.0.0 20160421 (experimental)
Optimize Graphite options FULL -03
SOUND:
Remove Boeffla Sound
Add fauxsound codec
Fix speaker gain store (use Kernel Adiutor in Sound)
for WCD9320 sound control module Copyright 2013 Paul Reioux
HOTPLUG:
HOTPLUG_CPU=y
ALUCARD_HOTPLUG MSM_LIMITER
INTELLI_PLUG ZEN_DECISION ASMP
MSM_SLEEPER BRICKED_HOTPLUG
Governors optimized BADASS (with GPU_CONTROL) and ELEMENTALX
Add in kernel LZ4
How to use new ZRAM goto here here
ZRAM setting default is 4 device (size 64MB * 4) total 256MB
ZSWAP in LZ4
Swap in ZCACHE Parameters in: sys/kernel/mm/zcache
KSM is not set
CONFIG_HZ_300
Compression KERNEL XZ
KERNEL MODE NEON
SuperSUATCH:276 in Ramdisk not necessary to reflash SuperSU
( but I flashed SuperSU v2.67 build 57 Beta [Marshmallow Fixed] )
Add IO Schedulers NOOP DEADLINE ROW CFQ SIO FIOPS BFQ BFQIO ZEN TRIPNDROID SIOPLUS VR
Add NEW Governors for CPU:
PERFORMANCE POWERSAVE USERSPACE ONDEMAND SLIM INTERACTIVE CONSERVATIVE
ZZMOOVE INTELLIDEMAND INTELLIACTIVE WHEATLEY SMARTMAX SMARTMAX_EPS
INTELLIMM LIONHEART NIGHTMARE PEGASUSQ IMPULSE ONDEMANDPLUS
YANKACTIVE ADAPTIVE ABYSSPLUG CYAN INTERACTIVE_S5MINI ARTERACTIVE
DANCEDANCE DARKNESS HYPER LAZY OPTIMAX TRIPNDROID UBERDEMAND
BADASS (with GPU_CONTROL) ELEMENTALX HELLSACTIVE SAVAGEDZEN YANKDEMAND
New Power management options:
POWERSUSPEND
WAKELOCKS
WQ_POWER_EFFICIENT_DEFAULT
QUICK_WAKEUP
PM_SYNC_BEFORE_SUSPEND
CPU VOLTAGE TABLE up OC 2800Mhz
BOEFFLA_TOUCH_KEY_CONTROL
BOEFFLA mod LEDS AN30259A
CRYPTO LZ4, CRYPTO SHA1 ARM, CRYPTO AES, CRYPTO AES ARM, CRYPTO AES ARM BS, CRYPTO ABLK HELPER
v1.4
Fix a little bug... in QUICK_WAKEUP
zram vs zswap vs zcache Ultimate guide: when to use which one
Click to expand...
Click to collapse
Download: Kernel-Neox-G900F-TW-601-v1.4-boeffla-u700-zram.zip
Download: Kernel-Neox-G900F-TW-601-v1.4-boeffla-u700-zswap.zip
Download: Kernel-Neox-G900F-TW-601-v1.4-boeffla-u700-zcache.zip
For Setup kernel: kernel-adiutor-0-9-9-4-android-apk-download
This version use part of RamDisk of the Boeffla-Kernel and use Boeffla-Config V2 app
Yeah go on folks donate for this great Dev By ZaneZam !! Thanks
Thanks to Lord Boeffla
How to use new ZRAM goto here here
sources github boeffla-kernel-samsung-s5_m
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Can use in xXx rom...??
SM G900F xXx 5.0 Odex Boeffla 2.1 beta2 Twrp 3.0.2-0
Kamal363 said:
Can use in xXx rom...??
SM G900F xXx 5.0 Odex Boeffla 2.1 beta2 Twrp 3.0.2-0
Click to expand...
Click to collapse
If ram disk is compatible yes.
Otherwise you have to decompile the two kernel and recompile
with Android.Image.Kitchen.
Update v1.4
Fix a little bug... in QUICK_WAKEUP
Superb Job
Use speaker gain store:
Start Google Play Music and play a song (only speaker)
Now start Kernel Adiutor goto in Sound and move slide Speaker Gain
nafyy said:
Superb Job
Click to expand...
Click to collapse
Enjoy bro!
What is the difference of this and boeffla kernel?
And the difference of Zeam Zswap and Zcache?
Sorry ignorance and bad English
Rodri96 said:
What is the difference of this and boeffla kernel?
And the difference of Zeam Zswap and Zcache?
Sorry ignorance and bad English
Click to expand...
Click to collapse
Another kernel...
Click on zram vs zswap vs zcache Ultimate guide: when to use which one in first post.
The descriptions between the kernels is a little bit difficult to understand for inexperienced users like us. Which kernel version do you recommend to use for best performance and battery life?
Sent from my SM-G900F using XDA-Developers mobile app
Kernel works on :
PhoeniX ROM V12.0 MM 6.0.1[Aroma Installer]
xXx No Limits 5.0
tested
Renix63 said:
Kernel works on :
PhoeniX ROM V12.0 MM 6.0.1[Aroma Installer]
xXx No Limits 5.0
tested
Click to expand...
Click to collapse
Phoenix Rom v12.6 work without problem
PHP:
I used zram with this settings:
Cpu max : 1728 Mhz
Governor : pegasus
Cpu Hotplug : IntelliPlug
GPU : default
Scheduler I/O : tripnoid 1024K
Misc : default
the remainder to default
If you want to set MSM_LIMITER the parameters are in:
/sys/kernel/msm_limiter
if you wont enable it set limiter_enabler=1
When i start my phone and open boeffla app.
It says dummy error load
[email protected] said:
When i start my phone and open boeffla app.
It says dummy error load
Click to expand...
Click to collapse
I know I go ahead and click on default profile.
I prefered use Kernel Adiutor but for led and other settigs we have to use boeffla app.
Kernel works on :
STOCK ROM TW 6.0.1 (tested on G900FXXU1CPEM)
Can you make a kernel running with this rom: http://forum.xda-developers.com/galaxy-s5/development/rom-darklord-ux-grace-port-t3423249 ???
radekg7 said:
Can you make a kernel running with this rom: http://forum.xda-developers.com/galaxy-s5/development/rom-darklord-ux-grace-port-t3423249 ???
Click to expand...
Click to collapse
It should work the rom is MM 6.0.1
Fantastic app for kernel control:
Kernel Adiutor-Mod [V15] [18JUL2016]
Renix63 said:
It should work the rom is MM 6.0.1
Click to expand...
Click to collapse
Don't work developer change something. Similar situation: http://forum.xda-developers.com/galaxy-s5/development/official-pure-note-7-port-t3426048 .
WarningI will not be responsible for anything that happens to your Redmi 2 after flashing this kernel. If you don't know how to unbrick your phone please don't make any modifications and stay with stock MIUI.
What is HexaTurbo?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
HexaTurbo kernel is meant to be the best gaming kernel with awesome Zetsubou features added on top of CAF/CM kernel. Kernel source will always be kept in sync with new caf(LA.BR.1.2.9_rbx.xx) and mainstream linux(3.10.y) updates. For now the kernel dosn't include features like Undervolt and other features.
Zetsubou
This kernel is 100% based on Zetsubou kernel, that is the best performance/stability balance for redmi 2! So all new Zetsubou features will be added and optimized much as possible to deliver the best performance for Root and Non-Root users, what? non-root users? yes! this kernel was made to be used without root! so you can get the max performance in your games without using Kernel adiutor or EX kernel manager!! (cof... cof.... Pokemon GO)
Features:
NEON optimization
linux version 3.10.105
compiled with UBER GCC 4.9
GPU TurboClock support upto 620MHz
based on caf branch LA.BR.1.2.9_rbx.xx
General optimizations
True 1.2ghz clock
wake gestures: doubletap2wake, sweep2wake (up,down,left,right)
sound control for root users (not tested)
sweep2sleep support!
I/O schedulers: sio, deadline, fiops, noop, bfq, cfq, fifo, sioplus, vr, tripndroid and zen
governors: interactive, ondemand, conservative, performance, chill, relaxed, impulse, bioshock and despair
hotplug: lazyplug
KCAL advanced color control
adreno idler
DriveDroid support
advanced TCP congestion algorithms
force fast charge support
disabled crc check
FS: exfat, NTFS & sdcardfs support
f2fs updated upto v4.10-rc1-3.10
frandom support
reduced load average
fsync on/off support
Check my and Ahish source for other features
-- Download Now --
-- 2017 NewGen Logo Download --
Use EX KERNEL MANAGER or KERNEL ADIUTOR to control all features
Installation:
-Download the zip file and save it into the root directory of external storage
-Reboot to recovery mode and flash the zip file
-Reboot device
It's recommended to flash HexaTurbo only over stock kernel
I recomend using Custom installation for better choices, since you are a gamer!
Kernel will boot with max CPU/GPU frequencies that you select, ex: 1.21GHz/620MHz
Credits:
-ketut.kumajaya hats off to this man for all the work he did for Redmi 2
-osm0sis for his amazing AnyKernel script
-flar2 for his awesome features
-Ashish94 for helping me in almost everything!
-iamsubhranil for also helping me out!
XDA:DevDB Information
[Kernel][N-M][UBER-GCC][NewGen] HexaTurbo 2017, Kernel for the Xiaomi Redmi 2
Contributors
TecnoTailsPlays, Ashish94, iamsubhranil, All devs from kernel guides and mods
Source Code: https://github.com/TecnoAquaPlays/android_kernel_wingtech_HexaTurbo/tree/master
Kernel Special Features: This kernel is optimized for gaming, make your redmi 2 better and cooler!
Version Information
Status: Stable
Current Stable Version: 20170312
Stable Release Date: 2017-03-13
Created 2017-02-09
Last Updated 2017-03-24
Changelog 20170313 NewGen
-Fix random reboots on 2014819
-Stock CPU clock 1.21ghz (1.8ghz or 2.1ghz are fake overclock)
-Add KSM
-Sync Zetsubou sources
-Add F2FS & SDCARDFS support <---| Check Zetsubou thread for how to format to thease file system's
-LineageOS source
-Many other optimizations
Changelog 20170212 Equalizer
-Remove Fake CPU clocks
-Remove fake overclock to 2.11ghz and go back to "Supported 1.3ghz"
-Optimized aroma installer
-Minor things
GPU overclock is Real, and all clocks too, so I din't change anything for now
Changelog 20170210-something
-Totally new freequency table for GPU/CPU, you will get way smoother UI and games
-Minor fixes
Changelog 20170210-Fix
-Switch back to UBER gcc 4.9 becouse some issues with CPU
-Optimize aroma installer a little bit
-Testing new CPU overclock code
-Other minor stuff
Changelog 20170210
-Switch to UBER gcc 6.0
-Enable -O3 optimization
Changelog 20170209:
-Initial build
Can I flash with custom rom like AOSP?
Can i flash it on Validus?
Sent from my 2014813 using Tapatalk
Yousef Algadri said:
Can i flash it on Validus?
Sent from my 2014813 using Tapatalk
Click to expand...
Click to collapse
Sure, if it din't work, sent me dmesg and logcat
zmanz79 said:
Can I flash with custom rom like AOSP?
Click to expand...
Click to collapse
I'm not sure, since this kernel is for cm based roms, you can give it a try....
Good job, my Redmi 2 is fast. Amazing! I'm using mokee 7.1 nitghly 20170207
no sim cards detected after flashing the kernel but on dirty flashing the rom it gets detected.the rom is RR N latest .
Yeah techno is doing awesome work
AOSPExtended..
Custom installation not work for CPU and Color Control. I have to manually adjust all the setting on each reboot. Especially for CPU control, it need time to get 2112 , it keep lock down to 800 on each reboot. Anyway good performance .
bro 2.11 ghz for cpu...... wtf... cool man... installing it right away
Could you add another Hotplug? AutoSMP would be nice
taalojarvi said:
Could you add another Hotplug? AutoSMP would be nice
Click to expand...
Click to collapse
I will try
New build is out!
-Switch to UBER GCC 6.0
-Enable -O3 optimization
New features will be added in future builds, becouse I need time to test other -unstable- features
DOWNLOAD
TecnoTailsPlays said:
New build is out!
-Switch to UBER GCC 6.0
-Enable -O3 optimization
New features will be added in future builds, becouse I need time to test other -unstable- features
DOWNLOAD
Click to expand...
Click to collapse
Work in AOSP EX ?
andreymixmax said:
Work in AOSP EX ?
Click to expand...
Click to collapse
Look, I only use LineageOS, so I can't test in others roms, you will have to try by yourself
LOL, if someone is using the kernel, please open CPU-Z and kernel adiutor and sent me a screenshot of the freequencyes, I think the UBER 6.0 glitched the kernel
New build online!!
-Fix weird stuff on CPU-Z and other apps
-Switch back to UBER gcc 4.9 becouse CPU problems
-Edit aroma installer picture time
-Optimize CPU overclock code (Report if you had random reboots only with this kernel in LineageOS)
--DOWNLOAD--
@TecnoTailsPlays
Whilst testing your new update, I realized that the UI was really laggy. So I checked my frequencies and governor via KA and found out that the max frequency was capped at 800 mhz.
I tried changing frequencies and the frequencies wouldn't stick. If I tried raising it to 1209, it would bounce back to 800.
I tried changing governors too. Unfortunately issue didn't have a workaround so I Reverted to Zetsubou
My modem is 2014818 and I have the 1Gb Variant. I run AiCP 12.1
taalojarvi said:
@TecnoTailsPlays
Whilst testing your new update, I realized that the UI was really laggy. So I checked my frequencies and governor via KA and found out that the max frequency was capped at 800 mhz.
I tried changing frequencies and the frequencies wouldn't stick. If I tried raising it to 1209, it would bounce back to 800.
I tried changing governors too. Unfortunately issue didn't have a workaround so I Reverted to Zetsubou
My modem is 2014818 and I have the 1Gb Variant. I run AiCP 12.1
Click to expand...
Click to collapse
Did you try the latest build? this was fixed