Related
Hi.
So the latest Cyanogenmod (honestly every update out of the CM update that came out on 9th Oct) builds do not work for my device. Whenever I try to boot up the device, the device just gets stuck on the bootup screen, that is the screen where you see the OnePlus logo and there's text in the lower part that says "Powered by Android", except that there is no "powered by Android" text seen.
What should I do in order to get things working?
Sorry to post this in the general thread, I am not yet high enough that I can post in the Android Development Thread.
The latest 2 builds are only compatible with the new Marshmallow Bootloader, AFAIK.
In order to get them working, I would recommend you to flash the full OOS 3.1.3 zip file.
There is the alternative to flash a zip file to get the latest booloader and radio firmware. I haven't tested it, that's why I'm not telling you to do so.
Loureiro said:
The latest 2 builds are only compatible with the new Marshmallow Bootloader, AFAIK.
In order to get them working, I would recommend you to flash the full OOS 3.1.3 zip file.
There is the alternative to flash a zip file to get the latest booloader and radio firmware. I haven't tested it, that's why I'm not telling you to do so.
Click to expand...
Click to collapse
I currently am running the CM 13.0 2016-10-09 build which works like it should. So should I switch to OOS 3.1.3 and then flash the new CM build?
aamodjoshi23 said:
I currently am running the CM 13.0 2016-10-09 build which works like it should. So should I switch to OOS 3.1.3 and then flash the new CM build?
Click to expand...
Click to collapse
Yes. Just like that. But OOS 3.X.X has new Bootloader. So new TWRP should be flashed.
New TWRP : http://forum.xda-developers.com/oneplus-x/development/unofficial-twrp-3-0-2-0-recovery-onyx-t3471584
And flash it as usual.
sundhar88 said:
Yes. Just like that. But OOS 3.X.X has new Bootloader. So new TWRP should be flashed.
New TWRP : http://forum.xda-developers.com/oneplus-x/development/unofficial-twrp-3-0-2-0-recovery-onyx-t3471584
And flash it as usual.
Click to expand...
Click to collapse
Alright thanks! If I face any problems I'll post again!
aamodjoshi23 said:
Alright thanks! If I face any problems I'll post again!
Click to expand...
Click to collapse
Wait dude! If you're on OOS 2.X.X based ROM and TWRP, then you should flash official OxygenOS Recovery and then flash the Marshmallow ROM. And now you can flash TWRP root or flash CM13 or xposed and whatever...
Refer : http://forum.xda-developers.com/oneplus-x/general/guide-update-bootloader-firmware-to-t3478917
sundhar88 said:
Wait dude! If you're on OOS 2.X.X based ROM and TWRP, then you should flash official OxygenOS Recovery and then flash the Marshmallow ROM. And now you can flash TWRP root or flash CM13 or xposed and whatever...
Refer : http://forum.xda-developers.com/oneplus-x/general/guide-update-bootloader-firmware-to-t3478917
Click to expand...
Click to collapse
Yup. You need to first flash the OOS recovery and then you need to flash the OOS 3.1.3 and then again the TWRP and then you need to flash whichever ROM you want to... Been there, done that. Real pain...
aamodjoshi23 said:
I currently am running the CM 13.0 2016-10-09 build which works like it should. So should I switch to OOS 3.1.3 and then flash the new CM build?
Click to expand...
Click to collapse
That's right.
If you don't want to do a complete wipe, you can try this method: http://forum.xda-developers.com/oneplus-x/general/guide-update-bootloader-firmware-to-t3478917
Loureiro said:
That's right.
If you don't want to do a complete wipe, you can try this method: http://forum.xda-developers.com/oneplus-x/general/guide-update-bootloader-firmware-to-t3478917
Click to expand...
Click to collapse
You're a lifesaver dude! Thanks for the link!!
Hi all,
I’m having the exact same problem. I’ve searched several forums, and have seen different solutions, but I’m unsure what solution to follow. The steps in this thread seem the most logical to me. But just to be clear, are this the steps I have to follow, in the correct order? I don’t want to make any mistakes. I’m currently on OOS 2.2.2 with TWRP 3.0.2.0.
(make backup, I’m wiping the whole thing)
Copy OPX_recovery and OOS 3.1.3 to phone
Flashboot flash OPX_recovery.img (Lollipop version, not MM)
Reboot (to bootloader?)
Flashboot flash OOS 3.1.3 (from pc or from bootloader?)
Wipe Dalvik/cache
Reboot (to bootloader?)
Flash twrp-3.0.2-0-onyx-20161020-085152.img as found in post from sundhar88
Flash latest CM13
Wipe Dalvik/cache
Reboot in normal mode
Should I download and keep the CM13 recovery version too?
Your reply would be massively appreciated!
Cretandus said:
Hi all,
I’m having the exact same problem. I’ve searched several forums, and have seen different solutions, but I’m unsure what solution to follow. The steps in this thread seem the most logical to me. But just to be clear, are this the steps I have to follow, in the correct order? I don’t want to make any mistakes. I’m currently on OOS 2.2.2 with TWRP 3.0.2.0.
(make backup, I’m wiping the whole thing)
Copy OPX_recovery and OOS 3.1.3 to phone
Flashboot flash OPX_recovery.img (Lollipop version, not MM)
Reboot (to bootloader?)
Flashboot flash OOS 3.1.3 (from pc or from bootloader?)
Wipe Dalvik/cache
Reboot (to bootloader?)
Flash twrp-3.0.2-0-onyx-20161020-085152.img as found in post from sundhar88
Flash latest CM13
Wipe Dalvik/cache
Reboot in normal mode
Should I download and keep the CM13 recovery version too?
Your reply would be massively appreciated!
Click to expand...
Click to collapse
No need for you to do this.
Just follow this guide http://forum.xda-developers.com/oneplus-x/general/guide-update-bootloader-firmware-to-t3478917 and then flash latest CM13 nightly.
Adesh15 said:
No need for you to do this.
Just follow this guide http://forum.xda-developers.com/oneplus-x/general/guide-update-bootloader-firmware-to-t3478917 and then flash latest CM13 nightly.
Click to expand...
Click to collapse
Okay, thanks! I'll try this and let you know the outcome. I have to install CM13 before rebooting out of TWRP, right? "Older roms won't boot" meaning my OOS 2.2.2 won't boot. Just checking...
Cretandus said:
Hi all,
I’m having the exact same problem. I’ve searched several forums, and have seen different solutions, but I’m unsure what solution to follow. The steps in this thread seem the most logical to me. But just to be clear, are this the steps I have to follow, in the correct order? I don’t want to make any mistakes. I’m currently on OOS 2.2.2 with TWRP 3.0.2.0.
(make backup, I’m wiping the whole thing)
Copy OPX_recovery and OOS 3.1.3 to phone
Flashboot flash OPX_recovery.img (Lollipop version, not MM)
Reboot (to bootloader?)
Flashboot flash OOS 3.1.3 (from pc or from bootloader?)
Wipe Dalvik/cache
Reboot (to bootloader?)
Flash twrp-3.0.2-0-onyx-20161020-085152.img as found in post from sundhar88
Flash latest CM13
Wipe Dalvik/cache
Reboot in normal mode
Should I download and keep the CM13 recovery version too?
Your reply would be massively appreciated!
Click to expand...
Click to collapse
Install opx_recovery, flash 3.1.3 from recovery. After installed you can fastboot flash Blu sparks latest or Nichets twrp done.
Cretandus said:
Okay, thanks! I'll try this and let you know the outcome. I have to install CM13 before rebooting out of TWRP, right? "Older roms won't boot" meaning my OOS 2.2.2 won't boot. Just checking...
Click to expand...
Click to collapse
After flashing the new TWRP for new BL you should reboot to recovery from reboot tab in TWRP.
Then wipe System ,Data and Cache and then flash CM13
Cretandus said:
Hi all,
I�¢??m having the exact same problem. I�¢??ve searched several forums, and have seen different solutions, but I�¢??m unsure what solution to follow. The steps in this thread seem the most logical to me. But just to be clear, are this the steps I have to follow, in the correct order? I don�¢??t want to make any mistakes. I�¢??m currently on OOS 2.2.2 with TWRP 3.0.2.0.
(make backup, I�¢??m wiping the whole thing)
Copy OPX_recovery and OOS 3.1.3 to phone
Flashboot flash OPX_recovery.img (Lollipop version, not MM)
Reboot (to bootloader?)
Flashboot flash OOS 3.1.3 (from pc or from bootloader?)
Wipe Dalvik/cache
Reboot (to bootloader?)
Flash twrp-3.0.2-0-onyx-20161020-085152.img as found in post from sundhar88
Flash latest CM13
Wipe Dalvik/cache
Reboot in normal mode
Should I download and keep the CM13 recovery version too?
Your reply would be massively appreciated!
Click to expand...
Click to collapse
Hi there.
I tried the way these folks suggested, by updating the BL using the zip file and flashing the updated TWRP recovery, and it worked!
What I did was, first of all, I took the backup using Titanium Backup and took a nandroid backup. Then I already had downloaded the files required, that is the BL zip file, the TWRP recovery, and the latest CM 13.0 build. Then I went to recovery > install and then located the BL and flashed it. Then I tried to flash the TWRP recovery but it didn't. Gave an error saying, "Unsuccessful" or something on those lines.
So I took that TWRP img file and copied it on my laptop. Then I went into the bootloader, which at first I thought was a bad idea since I just flashed the BL zip, then I flashed the new TWRP img file and went to recovery mode. And it had worked. So I flashed the CM 13.0 build too and then booted up the device, and it worked!
I guess that should help
aamodjoshi23 said:
Hi there.
I tried the way these folks suggested, by updating the BL using the zip file and flashing the updated TWRP recovery, and it worked!
Click to expand...
Click to collapse
I'm glad it worked for(don't forget to drop a thanks and a vote would be good too)
Also for next time,please search the forums before creating a thread.:angel:
Adesh15 said:
After flashing the new TWRP for new BL you should reboot to recovery from reboot tab in TWRP.
Then wipe System ,Data and Cache and then flash CM13
Click to expand...
Click to collapse
Adesh15, it worked! Thank you very much!
Cretandus said:
Adesh15, it worked! Thank you very much!
Click to expand...
Click to collapse
Great !
hello,
my current situation: i am on oos 2.2.3, not rooted, twrp 3.0.1-0 running.
i want to install a 3.x.x oos, version, i wanted to install 3.1.2 first, cause oneplus site i can install that directly form 2.2.3 (no such info on 3.1.3 and 3.1.4)
when i try to install with twrp, it says "this package is for "Oneplus" devices, this is a "ONE"
i think i am using the wrong twrp version. tried to install the newest (3.0.3-0), but this one doenst work, can not boot into it.
please help
Best is to fastboot flash old OOS 2 recovery
Then, with it, flash the 2.2.3. Reboot. then Flash 3.1.4. with the recovery
First you need to flash official oxygen os recovery for android 5.1 lollipop https://s3.amazonaws.com/oxygenos.oneplus.net/OPX_recovery.img Now you will be able to boot the phone. Now download and copy oxygen os 3.1.4 to internal memory http://downloads.oneplus.net/devices/oneplus-x/ Reboot into recovery and flash the rom.
Aftrr successful flash of oos3 boot into fastboot and flash latest twrp from twrp website.. This time it should work.
thanks, it work with the costum recovery.
on 3.1.4 i installed a slightly older twrp form sparkfire (3.0.2 i think), rooting and installing xposed worked fine though.
is it important to have the latest twrp?
and another question. at some point in my hours long struggel with updating my opx i softbricked it. i guess my bootloader was locked and i tried to install another recovery. i expected it to be still unlocked from my first rooting months ago. when does the bootloader lock?
dooglrig said:
thanks, it work with the costum recovery.
on 3.1.4 i installed a slightly older twrp form sparkfire (3.0.2 i think), rooting and installing xposed worked fine though.
is it important to have the latest twrp?
and another question. at some point in my hours long struggel with updating my opx i softbricked it. i guess my bootloader was locked and i tried to install another recovery. i expected it to be still unlocked from my first rooting months ago. when does the bootloader lock?
Click to expand...
Click to collapse
It is always recommended to use latest (bugs free)
You can use this one https://dl.twrp.me/onyx/twrp-3.0.3-0-onyx.img latest as of now. And no u didn't brick ur phone. U flashed a new twrp for old bootloader version. Thts y u got stuck with oneplus logo. Its all oneplus things. Its always preferred to use stock recovery for updating bootloader which is safe. Check your bootloader state by giving this cmds "fastboot oem device-info"
cva_kabil said:
It is always recommended to use latest (bugs free)
You can use this one https://dl.twrp.me/onyx/twrp-3.0.3-0-onyx.img latest as of now. And no u didn't brick ur phone. U flashed a new twrp for old bootloader version. Thts y u got stuck with oneplus logo. Its all oneplus things. Its always preferred to use stock recovery for updating bootloader which is safe. Check your bootloader state by giving this cmds "fastboot oem device-info"
Click to expand...
Click to collapse
Hmm isnt that for new BL as well ?
NielDK said:
Hmm isnt that for new BL as well ?
Click to expand...
Click to collapse
Yes it is. OP said that he's on OOS 3.1.3, so already on the new BL.
Greetings:
I believe I'm having troubles getting into TWRP. I used to have MIUI 10.0.6 in an Unlocked and Rooted device with TWRP installed. Everytime I pressed VolUp+Power, I got into the TWRP. But, after MIUI 10.1.3 installed by itself, I can't get into TWRP and instead, get into MI-RECOVERY 3.0
Did the new update "roll backed" my TWRP recovery and instead installed the MI-RECOVERY 3.0? Do I have to install TWRP again? Help pls!
Seriously, MIUI is the biggest piece of **** ever...no wonder everyone suggest flashing a custom rom...
DarkDeux said:
Greetings:
I believe I'm having troubles getting into TWRP. I used to have MIUI 10.0.6 in an Unlocked and Rooted device with TWRP installed. Everytime I pressed VolUp+Power, I got into the TWRP. But, after MIUI 10.1.3 installed by itself, I can't get into TWRP and instead, get into MI-RECOVERY 3.0
Did the new update "roll backed" my TWRP recovery and instead installed the MI-RECOVERY 3.0? Do I have to install TWRP again? Help pls!
Seriously, MIUI is the biggest piece of **** ever...no wonder everyone suggest flashing a custom rom...
Click to expand...
Click to collapse
This is nothing new or exclusive to Mi. The original stock ROM will always replace the custom recovery. So you have to flash it again.
In future, after the update, don't boot into system. Boot into recovery and you should boot into TWRP. If not, flash TWRP again. Sometimes even that is not sufficient and you will have to flash Magisk also after flashing TWRP. And then boot into system.
tnsmani said:
This is nothing new or exclusive to Mi. The original stock ROM will always replace the custom recovery. So you have to flash it again.
In future, after the update, don't boot into system. Boot into recovery and you should boot into TWRP. If not, flash TWRP again. Sometimes even that is not sufficient and you will have to flash Magisk also after flashing TWRP. And then boot into system.
Click to expand...
Click to collapse
Thank you so much for the info! It's good to know that. Will have to flash it again.
Thank you once again.
DarkDeux said:
Thank you so much for the info! It's good to know that. Will have to flash it again.
Thank you once again.
Click to expand...
Click to collapse
If you want to thank someone, please use the thanks button below the post.
I have a Xiaomi mi5 and I have same problem...
Hi peeps
New Pocophone owner here. I got my bootloader unlocked earlier today and now trying to flash the official TWRP 3.3.0.0 recovery from twrp.me, simply following the fastboot instructions on the device guide.
However every time I reboot the device, the recovery always reverts to the stock MIUI recovery?
What am I doing wrong here?
I just got the phone and have upgraded it to MIUI 10.3.6 as well. I am wanting to flash pixel experience onto it.
Do following, instead of flashing your recovery.
Use this method boot and flash Magisk. Reboot back to your system and install Flashify and install your choosen Recovery with it
jonske said:
Hi peeps
New Pocophone owner here. I got my bootloader unlocked earlier today and now trying to flash the official TWRP 3.3.0.0 recovery from twrp.me, simply following the fastboot instructions on the device guide.
However every time I reboot the device, the recovery always reverts to the stock MIUI recovery?
What am I doing wrong here?
I just got the phone and have upgraded it to MIUI 10.3.6 as well. I am wanting to flash pixel experience onto it.
Click to expand...
Click to collapse
in stock rom you need to flash magisk right after flashing twrp else it will get replaced by stock
jonske said:
Hi peeps
New Pocophone owner here. I got my bootloader unlocked earlier today and now trying to flash the official TWRP 3.3.0.0 recovery from twrp.me, simply following the fastboot instructions on the device guide.
However every time I reboot the device, the recovery always reverts to the stock MIUI recovery?
What am I doing wrong here?
I just got the phone and have upgraded it to MIUI 10.3.6 as well. I am wanting to flash pixel experience onto it.
Click to expand...
Click to collapse
What the post above says is correct. However, if you don't want Magisk, after flashing TWRP, reboot into recovery and then into system. You may retain TWRP. However, this doesn't work for everyone.
Hi all, I fixed the issue by completely wiping my phone via TWRP and clean flashing pixel experience ROM. After rebooting on pixel rom TWRP persists.
It appears that MIUI rom has something that keeps reverting it to stock MI-recovery.
If you are on MIUI and flashing TWRP, once the recovery is up for the first time, you need to head on to reboot>recovery again in order to overwrite MIUI stock recovery. So the whole process would be like this;
i) Fastboot flash recovery twrp.img (or whatever the name of the image)
ii) Fastboot boot recovery
iii) Once TWRP is up, Swipe to allow modification and then go to Reboot>Recovery and reboot into TWRP once more. That's it! You have just overwritten the stock recovery and are now on TWRP!! Now you can reboot to system and TWRP will remain on your device. There's no need to flash Magisk etc if you want just TWRP and nothing else.
Rowdyy Ronnie said:
If you are on MIUI and flashing TWRP, once the recovery is up for the first time, you need to head on to reboot>recovery again in order to overwrite MIUI stock recovery. So the whole process would be like this;
i) Fastboot flash recovery twrp.img (or whatever the name of the image)
ii) Fastboot boot recovery
iii) Once TWRP is up, Swipe to allow modification and then go to Reboot>Recovery and reboot into TWRP again. That's it! You have just overwritten the stock recovery and are now on TWRP!! There's no need to flash Magisk etc if you just want TWRP and nothing else.
Click to expand...
Click to collapse
I did those exact steps and it didn't work. It ALWAYS kept getting overwritten.
jonske said:
I did those exact steps and it didn't work. It ALWAYS kept getting overwritten.
Click to expand...
Click to collapse
Did you follow step 3? You can't boot into system right after twrp is up for the first time. You need to reboot into twrp twice before you boot into system. This is what I do whenever I flash twrp and it never failed me yet.
Rowdyy Ronnie said:
Did you follow step 3? You can't boot into system right after twrp is up for the first time. You need to reboot into twrp twice before you boot into system. This is what I do whenever I flash twrp and it never failed me yet.
Click to expand...
Click to collapse
Yes, I even flashed the recovery image from within TWRP and rebooted to recovery again. Still didn't work.
Note this was on the new 10.3.6 stable MIUI release that got rolled out recently. Not sure if it has new detection or anything that rolls it back.
Anyway I have resolved my issue now all is good.
jonske said:
Yes, I even flashed the recovery image from within TWRP and rebooted to recovery again. Still didn't work.
Note this was on the new 10.3.6 stable MIUI release that got rolled out recently. Not sure if it has new detection or anything that rolls it back.
Anyway I have resolved my issue now all is good.
Click to expand...
Click to collapse
How did you fix it?
I was running stock MIUI with root and TWRP recovery. After flashing the Pixel Experience Android 11 ROM, I didn't flash TWRP again. I tried many attempts (I haven't mentioned everything here to keep the post shorter) to install TWRP again, and I managed to do it successfully once. However, now when I boot into TWRP and select the A partition, it can't decrypt with my password and reboots the system, always opening the bootloader. When selecting the B partition, if I format the data and flash Magisk, it opens up the system (it opens the bootloader without flashing Magisk). But after booting into the system, if I boot TWRP again and reboot into the system without doing anything, my settings app and Bluetooth stop working. Then I have to boot into TWRP again, format the data, and flash Magisk again to boot the system normally. I can't install any Magisk modules either. However, the root is working.
Do you have any suggestions on what I can do?"
AhmedRadowan25 said:
Do you have any suggestions on what I can do?
Click to expand...
Click to collapse
flash stock miui according to your region with mi flash (don't lock the bootloader!)
this generally solves any problem and you can go back to custom roms after booting into miui.
Anyway , i recommend you to use the recovery provided with the rom itself as twrp can give issues sometimes.
AhmedRadowan25 said:
I was running stock MIUI with root and TWRP recovery. After flashing the Pixel Experience Android 11 ROM, I didn't flash TWRP again. I tried many attempts (I haven't mentioned everything here to keep the post shorter) to install TWRP again, and I managed to do it successfully once. However, now when I boot into TWRP and select the A partition, it can't decrypt with my password and reboots the system, always opening the bootloader. When selecting the B partition, if I format the data and flash Magisk, it opens up the system (it opens the bootloader without flashing Magisk). But after booting into the system, if I boot TWRP again and reboot into the system without doing anything, my settings app and Bluetooth stop working. Then I have to boot into TWRP again, format the data, and flash Magisk again to boot the system normally. I can't install any Magisk modules either. However, the root is working.
Do you have any suggestions on what I can do?"
Click to expand...
Click to collapse
Here's a complete explanation what I have done:
Initially, I was running stock MIUI with root access and TWRP recovery. However, I decided to switch to the Pixel Experience ROM. I downloaded the Pixel Experience Android 11 version and flashed it directly from TWRP since I didn't have access to a PC at that time. I only flashed the ROM file and didn't install the Pixel Experience recovery image, assuming that my TWRP would remain intact. But when I rebooted into recovery after the ROM installation, it booted into the Pixel Experience recovery instead. I couldn't find an option to flash the recovery image, only an option to apply an update through ADB sideload.
Fortunately, I managed to use a friend's computer and installed all the necessary ADB and Fastboot drivers. The computer could detect my phone in ADB sideload mode, but when I tried to boot into the bootloader, the PC couldn't detect my phone. Despite multiple attempts of booting into the Pixel Experience recovery and enabling ADB sideload, the PC couldn't recognize the fastboot mode. Strangely, every time I booted into the bootloader, my phone automatically powered off after displaying the Redmi logo. Holding the power button didn't help as it consistently powered off after showing the logo, without accessing the bootloader or recovery mode. I was afraid my phone had become completely unresponsive.
After numerous attempts, my phone unexpectedly booted into the bootloader again. This time, I connected my phone to another device using BugJagger, which successfully detected my phone. I used the command "fastboot flash recovery twrp.img" followed by "fastboot boot twrp.img" to open TWRP. However, I couldn't decrypt it using my password. I then flashed TWRP again and tried to boot into the system, but it always reverted back to the bootloader. I went back into recovery, selected partitions A to B, and flashed Magisk ZIP, DM variety ZIP, and LazyFlasher ZIP (without fully understanding their purpose).
Finally, my phone successfully booted into the system. However, upon rebooting into TWRP and then rebooting the system without any changes, my settings app and bluetooth stoped working. To resolve this, I had to boot into TWRP once again, format the data, and flash Magisk to restore normal operation.
alonsoj636MW said:
flash stock miui according to your region with mi flash (don't lock the bootloader!)
this generally solves any problem and you can go back to custom roms after booting into miui.
Anyway , i recommend you to use the recovery provided with the rom itself as twrp can give issues sometimes.
Click to expand...
Click to collapse
yes i am also thinking that it is the only solution.But I have tampered almost everything of my phone.Will flash stock miui rom can solve all problem?I have writen everything what i have done details in reply.you can read it if you want.
AhmedRadowan25 said:
yes i am also thinking that it is the only solution.But I have tampered almost everything of my phone.Will flash stock miui rom can solve all problem?I have writen everything what i have done details in reply.you can read it if you want.
Click to expand...
Click to collapse
yes i think you messed up with your phone for real. there was a lot of things that was incorrect.
don't mess with the slots and don't flash things you don't know about... you can ask here if you have doubts...
follow my advice and reflash stock miui with miflash to start from 0
and don't do all those things again... once you are done with miui... just tell what do you want to do and we'll guide you properly
alonsoj636MW said:
yes i think you messed up with your phone for real. there was a lot of things that was incorrect.
don't mess with the slots and don't flash things you don't know about... you can ask here if you have doubts...
follow my advice and reflash stock miui with miflash to start from 0
and don't do all those things again... once you are done with miui... just tell what do you want to do and we'll guide you properly
Click to expand...
Click to collapse
alonsoj636MW said:
yes i think you messed up with your phone for real. there was a lot of things that was incorrect.
don't mess with the slots and don't flash things you don't know about... you can ask here if you have doubts...
follow my advice and reflash stock miui with to start from 0
and don't do all those things again... once you are done with miui... just tell what do you want to do and we'll guide you properly
Click to expand...
Click to collapse
Thank you very much.Flashing miui will solve all probem?what do you think?
AhmedRadowan25 said:
what do you think?
Click to expand...
Click to collapse
it should
at least when i mess up with my phone flashing stock fixes all problems
Hi mate! Did you resoved the problem? What about the rom? All good?
gabsvm1 said:
Hi mate! Did you resoved the problem? What about the rom? All good?
Click to expand...
Click to collapse
No.I am running pixel experience 11 rom with these problems.No problem will appear untill i boot into recovery.Sorry i can't check and tell you that if 13 rom's recovery can flash 11 rom.
AhmedRadowan25 said:
No.I am running pixel experience 11 rom with these problems.No problem will appear untill i boot into recovery.Sorry i can't check and tell you that if 13 rom's recovery can flash 11 rom.
Click to expand...
Click to collapse
No problem mate, besides that everything is working good? You have tried a13 roms before?
gabsvm1 said:
No problem mate, besides that everything is working good? You have tried a13 roms before?
Click to expand...
Click to collapse
No
Who told you to flash DM Verity and Lazy Flasher
We don't need these things in our device
Don't mess up with Active Slot
If you try to change your Active slot into Inactive slot, once you Reboot to system, you will go straight to fastboot
You need Android Bootloader Interface to detect your phone in bootloader and ADB Composite to detect your phone in ADB, such as : Google USB Driver r13
Why you don't ask before doing anything, we have global community chat in telegram, for sure, we will help you in possible way
I assume you need back to stock rom to fix this issue
hit me on tele t.me/super_img