Related
the iOS8 Killer will change your status bar to iOS8 feel
Features:
- Change the position of signal bars to the left
- Change the position of wifi to the left
- Show the carrier
- Custom carrier label
Downloads:
v 1.02 Download
Q&A:
What to do to get the full iOS8 look?
- Active my module of course
- Download and Active Xstana and set it to istyle
What is the use of your module if we still need to install other model?
Well, my module doesnt change the whole status bar, BUT! the module will do:
- move your wifi and the signal bars to the left
- show your carrier
- show a custom carrier label
- the iOS8 battery of course
- if any iOS theme wont work on your samsung, just install the module, especially 4.4 kitkat
Tested on:
Stock TW 4.4.4
Stock TW 4.4.2
Ozcan Rom 4.4.2
CM 11 4.4.4
thanks for @ibocharov for using some of his code
RubbaBand said:
the iOS8 Killer will change your status bar to iOS8 feel
Features:
- Change the position of signal bars to the left
- Change the position of wifi to the left
- Show the carrier
- Custom carrier label
Download
Q&A:
What to do to get the full iOS8 look?
- Active my module of course
- Download and Active Xstana and set it to istyle
What is the use of your module if we still need to install xstana?
Well, my module doesnt change the whole status bar, BUT! the module will do:
- move your wifi and the signal bars to the left
- show your carrier
- show a custom carrier label
- the iOS8 battery of course
- if any iOS theme wont work on your samsung, just install the module, especially 4.4 kitkat
thanks for @ibocharov for using some of his code
Click to expand...
Click to collapse
Compatilbe with what version of android? 4.1.2 will not let me install.
Sorry for my bad English
kios36 said:
Compatilbe with what version of android? 4.1.2 will not let me install.
Sorry for my bad English
Click to expand...
Click to collapse
Ididnt write compatible version because certainly i want to know what versions are supported, unill now its compatible with my 4.4
And your english is not that bad
RubbaBand said:
Ididnt write compatible version because certainly i want to know what versions are supported, unill now its compatible with my 4.4
And your english is not that bad
Click to expand...
Click to collapse
Thanks for the reply, I hope in the future it is compatible, just for information I leave my specifications
Samsung Galaxy Win
Android 4.1.2 stock ( touchwiz )
kios36 said:
Thanks for the reply, I hope in the future it is compatible, just for information I leave my specifications
Samsung Galaxy Win
Android 4.1.2 stock ( touchwiz )
Click to expand...
Click to collapse
I hope that too, you can check this thread at anytime for any updates and maybe ill contact you my self
Where is the download?
ace2k8 said:
Where is the download?
Click to expand...
Click to collapse
Under the features
Nice, waiting for 4.1 too
Scarotrhy said:
Nice, waiting for 4.1 too
Click to expand...
Click to collapse
Thank you, i hope so
Going to try. xt1031 stock lollipop (5.0.2)soak test rooted etc.
Will report back
Sent from my Boost Mobile Moto G (xt1031) using XDA App. Running Android 5.0.2
---------- Post added at 07:43 PM ---------- Previous post was at 07:17 PM ----------
Lollipop: (My experience, doesn't mean it won't work on others) Unfortunately SystemUI has stopped. Put my phone to sleep while I searched for a way to disable xposed on lollipop. When I went back to it, my lock screen was there so i just disabled and uninstalled the module. I didn't even have to reboot; status bar and nav bar automatically appeared.
Sent from my Boost Mobile Moto G (xt1031) using XDA App. Running Android 5.0.2
thank you
this module is amazing
please add an option to remove battery percentage in next version
kralkral said:
thank you
this module is amazing
please add an option to remove battery percentage in next version
Click to expand...
Click to collapse
Thank you , ill try
And please what version of android do you have?
RubbaBand said:
Thank you , ill try
And please what version of android do you have?
Click to expand...
Click to collapse
stock samsung kitkat 4.4.2
kralkral said:
stock samsung kitkat 4.4.2
Click to expand...
Click to collapse
ok, thanks
There's this message popping out saying 'there's a problem parsing the package' when I tried to install the apk
I'm using android 4.2.2
sina1905 said:
There's this message popping out saying 'there's a problem parsing the package' when I tried to install the apk
I'm using android 4.2.2
Click to expand...
Click to collapse
try to download again
sina1905 said:
There's this message popping out saying 'there's a problem parsing the package' when I tried to install the apk
I'm using android 4.2.2
Click to expand...
Click to collapse
Its not compatible with lower than 4.3
Link eror
Sent from my HM 1SW using XDA Premium 4 mobile app
fahrulridwan03 said:
Link eror
Sent from my HM 1SW using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Its working well
I am also getting a link error. Any help?
[Edit] fixed! Opened it via Tapatalk and it worked. Thanks
anyone willing to build up this post on what modules do work on the g3 without putting the phone into a boot loop? yesterday i got xposed alpha 3 installed and had the g3 tweakbox. tried to install a couple other modules that i had on my nexus 4 (kitkat) and that put my device in a boot loop.
here are the list i got:
gmail app attachment size
playstore changelog
wa/wa+ theme
xgpm
xinstaller
youtube background playback
on the nexus, when i installed xposed framework, i got a file that i could flash from twrp in case phone got into a boot loop (it disables the modules or the whole framework i think) but didn't get that on lollipop. anyone knows of a way to get rid of a boot loop other than a factory reset? (had to do that yesterday so asking for future reference).
is it a trial and error to find out if a module will boot loop the phone on lollipop? or is there some other method?
RockyAJ said:
anyone willing to build up this post on what modules do work on the g3 without putting the phone into a boot loop? yesterday i got xposed alpha 3 installed and had the g3 tweakbox. tried to install a couple other modules that i had on my nexus 4 (kitkat) and that put my device in a boot loop.
here are the list i got:
gmail app attachment size
playstore changelog
wa/wa+ theme
xgpm
xinstaller
youtube background playback
on the nexus, when i installed xposed framework, i got a file that i could flash from twrp in case phone got into a boot loop (it disables the modules or the whole framework i think) but didn't get that on lollipop. anyone knows of a way to get rid of a boot loop other than a factory reset? (had to do that yesterday so asking for future reference).
is it a trial and error to find out if a module will boot loop the phone on lollipop? or is there some other method?
Click to expand...
Click to collapse
Yes in twrp you can go into file manager and under apps delete the xposed app that is causing the bootloop wipe the caches and you should be good
Working Lollipop modules:
For the sake of good camera, I'm using stock based CloudyRom. So the results are for stock based ROMS. Will be updating the post after future tests
Working:
Obviously G3 Tweakbox
GravityBox (I have it for the volume button cursor control)
AppSettings (Surpisingly it works great. Just dong go below 540 for stock LG apps)
ChromePie
Greenify
Not Working:
klukiyan said:
For the sake of good camera, I'm using stock based CloudyRom. So the results are for stock based ROMS. Will be updating the post after future tests
Working:
Obviously G3 Tweakbox
GravityBox (I have it for the volume button cursor control)
AppSettings (Surpisingly it works great. Just dong go below 540 for stock LG apps)
ChromePie
Not Working:
Greenify (I don't need it, just know it doesnt work)
Click to expand...
Click to collapse
and here i thought gravitybox works only for nexus devices.hah.i ended up buying tweakbox. don't regret it though. greenify works flawlessly for me. am running stock rom that came with phone. didn't flash any custom ones. i use app ops instead of appsettings though i just looked that one up and has a few more options. also lucky patcher works fine
let's keep the lists coming
klukiyan said:
For the sake of good camera, I'm using stock based CloudyRom. So the results are for stock based ROMS. Will be updating the post after future tests
Working:
Obviously G3 Tweakbox
GravityBox (I have it for the volume button cursor control)
AppSettings (Surpisingly it works great. Just dong go below 540 for stock LG apps)
ChromePie
Not Working:
Greenify (I don't need it, just know it doesnt work)
Click to expand...
Click to collapse
what you mean sir greenify not working? i installed it then activated modules...then no bootloop..but for technicalities you found out why its not working.please explain..so that i will change to servicely
chacho_2me said:
what you mean sir greenify not working? i installed it then activated modules...then no bootloop..but for technicalities you found out why its not working.please explain..so that i will change to servicely
Click to expand...
Click to collapse
I mean the greenify as Xposed module. As the app it works perfect. Sorry for confusion.
klukiyan said:
I mean the greenify as Xposed module. As the app it works perfect. Sorry for confusion.
Click to expand...
Click to collapse
Greenify as a xposed module works perfectly for me on both latest Cloudy and CM
4ndroid99 said:
Greenify as a xposed module works perfectly for me on both latest Cloudy and CM
Click to expand...
Click to collapse
Thank you for the info. I saw it totally red here https://docs.google.com/spreadsheets/d/10vutBHBlPtEFtnqNQBuz-IzStlXNGbVS6K0BRpwz7n0/edit#gid=0, so was afraid to try.
klukiyan said:
Thank you for the info. I saw it totally red here https://docs.google.com/spreadsheets/d/10vutBHBlPtEFtnqNQBuz-IzStlXNGbVS6K0BRpwz7n0/edit#gid=0, so was afraid to try.
Click to expand...
Click to collapse
i can confirm it works fine for me too. module and app.
I personally use and can confirm they all work; Greenify, Amplify, Flat syle bar indicators , G3 Tweaksbox and Gravitybox without any issues.
Hello.
I just need to ask something. Is there any custom ROM based on stock LG firmware (Android 5.0) which allows you to use Xposed modules, but keeping all the functionality of QuickCircle case?
Ćwirek said:
Hello.
I just need to ask something. Is there any custom ROM based on stock LG firmware (Android 5.0) which allows you to use Xposed modules, but keeping all the functionality of QuickCircle case?
Click to expand...
Click to collapse
Not for now... To install Xposed Framework you have to delete/freeze Quickcircle... But, in beggining weather apk was also necessary to freeze... Not anymore. There are some mods to use xposed and weather. Probably, some day, circle case will also be available with xposed
Delgadovsky said:
Not for now... To install Xposed Framework you have to delete/freeze Quickcircle... But, in beggining weather apk was also necessary to freeze... Not anymore. There are some mods to use xposed and weather. Probably, some day, circle case will also be available with xposed
Click to expand...
Click to collapse
Can you elaborate on that? Earlier i got into a bootloop and had to factory reset phone and i lost the backup xposed made for weather and the clock thingie. A guy sent me the apks that the app created for him. Weather and clock, etc. You think it would be safe to just install the weather ones from within the phone(not flash from recovery) and make them system apps to have it working again? If not, can you advise please? Thanks
Sent from my LG-D855 using XDA Free mobile app
Please let me know if someday Xposed and QuickCircle case will work together without freezing anything in Titanium Backup
Ćwirek said:
Please let me know if someday Xposed and QuickCircle case will work together without freezing anything in Titanium Backup
Click to expand...
Click to collapse
as far as I know xposed new version (69) works.
vassagout said:
as far as I know xposed new version (69) works.
Click to expand...
Click to collapse
Yes it does. I'm using it on my D851 now.
Sent from my LG-D851 using Tapatalk
well, THE man himself said it:
So here it is, framework version 69 with support for LG's encrypted apps (LGCover, LGWeather, maybe more). Please make sure to clean your Dalvik cache after flashing the ZIP if you have an LG device and had issues with these apps.
Click to expand...
Click to collapse
good to know our device is still gettin' some love
i'm still on ver68 & attached is a list of my working modules. btw, do we still need the LP mem fix?
You mean that the version 69 could work with the quickCircle?
Hmm, I will backup and test it, it's very interesting...
Edit: Ok, I confirm that the 69 is ok with the QuickCircle and weather. That's great
(tested on Cloudy 2.5)
Envoyé de mon LG-D855 en utilisant Tapatalk
Introduction
This is a stock-based rom I initially created for myself, now I'm sharing it because it can be handy also to some other people.
I only made some small modifications and added some useful features from our devs
Click to expand...
Click to collapse
Features
based on latest NPN25.137-67 firmware
deodexed
zipaligned
debloated (removed some gapps, you can download them from play store)
rooted with magisk
battery percentage mod (on the left of the battery)
3MinitClock (customisable clock mod in statusbar)
removed ime switcher on navbar
tinted navbar (where the app allows it)
all rotations enabled
@defcomg mods for camera (less aggressive sharpening | noise reduction)
led support (thanks to @vache)
debug usb icon and notification removed
cool navbar icons
Click to expand...
Click to collapse
Installation instructions
Reboot in recovery
Wipe data, cache and dalvik
Install zip
Reboot
To have root you must update magisk app (currently not available in play store)
Click to expand...
Click to collapse
Issues
Moto Action "flip to mute" is not working
MagiskHide and modules not working properly
Click to expand...
Click to collapse
Changelog
Last changlog:
Code:
Stoneware v.67 - 05/06/2017
[NOTE] Initial build
Old changlogs:
Code:
Empty
Click to expand...
Click to collapse
Downloads
Download
Stoneware v.67 [675 MB]
Mods
[VRT]Remove custom battery percentage
[VRT]Remove clock from statusbar
Right stock clock in statusbar + battery percentage
[VRT]Right custom clock in statusbar
[VRT]Left custom clock in statusbar
[VRT]Center custom clock in statusbar
Disable dynamic navbar
Disable led
Click to expand...
Click to collapse
Thanks To/Credits
@vache
@defcomg
@GtrCraft
@SuperR for his kitchen
@gharrington for 3MinitClock
@Erhany for battery %
@Ticklefish
@motomotomotoG
@RXS MoonBreakers
@sharan.nyn
Click to expand...
Click to collapse
XDA:DevDB Information
Stoneware, ROM for the Moto G5 Plus
Contributors
eskamhl
ROM OS Version: 7.x Nougat
Based On: Stock firmware
Version Information
Status: Stable
Created 2017-06-04
Last Updated 2017-06-04
Reserved
Thank you
Sent from my Moto G (5) Plus using Tapatalk
eskamhl said:
Introduction
Features
Installation instructions
Changelog
Downloads
Thanks To/Credits
XDA:DevDB Information
Stoneware, ROM for the Moto G5 Plus
Contributors
eskamhl
ROM OS Version: 7.x Nougat
Based On: Stock firmware
Version Information
Status: Stable
Created 2017-06-04
Last Updated 2017-06-04
Click to expand...
Click to collapse
screenshots please.
can u add dolby atmos by default
and also good camera like google camera or lenovo snap it which has features like blur etc.
and also add substratum theme manager by default
and how is the camera quality
vinay7 said:
screenshots please.
can u add dolby atmos by default
and also good camera like google camera or lenovo snap it which has features like blur etc.
and also add substratum theme manager by default
and how is the camera quality
Click to expand...
Click to collapse
Lots of thread for Atmos installation already .
Including it in rom deprives other users of flexibility .
Not recommended for XT1687 retus correct?
eskamhl said:
Introduction
Features
Installation instructions
Changelog
Downloads
Thanks To/Credits
XDA:DevDB Information
Stoneware, ROM for the Moto G5 Plus
Contributors
eskamhl
ROM OS Version: 7.x Nougat
Based On: Stock firmware
Version Information
Status: Stable
Created 2017-06-04
Last Updated 2017-06-04
Click to expand...
Click to collapse
include supersu. works fine with me
vinay7 said:
screenshots please.
can u add dolby atmos by default
and also good camera like google camera or lenovo snap it which has features like blur etc.
and also add substratum theme manager by default
and how is the camera quality
Click to expand...
Click to collapse
You can find some screenshots in "Screenshots" menu, as always at the top of a devdb thread.
Everyone has his hown preference about audio mods and in addition I'm not using any of them so I don't think I'll include one of those
The same is valid for substratum ( not everyone is using it, and I'm not ) and camera.
The camera quality is a little bit better than stock firmware thanks to defcomg and his modified libs.
aki_007 said:
Lots of thread for Atmos installation already .
Including it in rom deprives other users of flexibility .
Click to expand...
Click to collapse
I agree
atrac17 said:
Not recommended for XT1687 retus correct?
Click to expand...
Click to collapse
Honestly I don't know, but since it's from retin firmware and I'm using it on a xt1685 device I would give it a try.
Make a nandroid backup before doing anything, in particular oem partition ( the installer touches /system /boot and /oem partitions, nothing more )
eswarvf said:
include supersu. works fine with me
Click to expand...
Click to collapse
There's Magisk already, it has more options than supersu at this moment
eskamhl said:
Honestly I don't know, but since it's from retin firmware and I'm using it on a xt1685 device I would give it a try.
Make a nandroid backup before doing anything, in particular oem partition ( the installer touches /system /boot and /oem partitions, nothing more )
Click to expand...
Click to collapse
I already did a nandroid and have it up and running ?. Few questions, how do I disable the battery percentage mod and center clock mod? I already disabled 3MinitClock.
These are just features I don't use and disable the icons with ui tuner. Also, the LED support is for notifications when the screen is off only? Is there anyway to enable it while the screen is on?
I checked your thread for the mods to see if there was a way to remove them as well. Are they built into the system ui?
Thanks for this!
Does Moto Display work with this rom? I've been waiting very patiently for a debloated stock rom!
atrac17 said:
I already did a nandroid and have it up and running . Few questions, how do I disable the battery percentage mod and center clock mod? I already disabled 3MinitClock.
These are just features I don't use and disable the icons with ui tuner. Also, the LED support is for notifications when the screen is off only? Is there anyway to enable it while the screen is on?
I checked your thread for the mods to see if there was a way to remove them as well. Are they built into the system ui?
Thanks for this!
Click to expand...
Click to collapse
For the battery percentage mod I have to make at least a VRTheme, will do it tomorrow.
About the clock you can put a "space" in 3MinitClock app and it should be fine
Edit: I just noticed there's an option to hide clock inside 3MinitClock app, it's just a matter of fixing the bug described here below.
roygbiv859 said:
Does Moto Display work with this rom? I've been waiting very patiently for a debloated stock rom!
Click to expand...
Click to collapse
Works as in stock rom :good:
Hello and thanks for the stock rom! Looks like this is going to become my daily!
Only problem I've noticed so far is the 3minit clock mod.. After changing it to right align, it is fine until you pull down the status bar and snap it back, then you have two clocks! One in the middle, one on the right
Justin933 said:
Hello and thanks for the stock rom! Looks like this is going to become my daily!
Only problem I've noticed so far is the 3minit clock mod.. After changing it to right align, it is fine until you pull down the status bar and snap it back, then you have two clocks! One in the middle, one on the right
Click to expand...
Click to collapse
Temp fix I just set the clock to center align and I only have one clock now.
Justin933 said:
Temp fix I just set the clock to center align and I only have one clock now.
Click to expand...
Click to collapse
You're definitely right [emoji15]
There are some problems with the clock positioned at the center, this evening I'll look at the code ( I'm using the centered clock, I just checked it was moving correctly and nothing more ).
In addition I have to admit there are some issues with magisk, I'm not even passing basic integrity.
It seems like magisk is mounted in ro mode, uninstalling a reinstalling did not fix the problem so I think we must wait a patched/custom kernel.
Thanks a lot for this rom its my daily driver, however I wanted to know whether its possible to remove the battery percentage besides the battery icon ? http://cloud.tapatalk.com/s/59354a69e4f20/_20170605_174058.JPG
Sent from my Moto G (5) Plus using Tapatalk
pls check the wifi and cmera
eswarvf said:
include supersu. works fine with me
Click to expand...
Click to collapse
pls check the camera and wifi..
eskamhl said:
You're definitely right [emoji15]
There are some problems with the clock positioned at the center, this evening I'll look at the code ( I'm using the centered clock, I just checked it was moving correctly and nothing more ).
In addition I have to admit there are some issues with magisk, I'm not even passing basic integrity.
It seems like magisk is mounted in ro mode, uninstalling a reinstalling did not fix the problem so I think we must wait a patched/custom kernel.
Click to expand...
Click to collapse
I gave this a try since I really like debloated stock ROMs. Couldn't get the status bar clock to stay how I'd set it, then tried hiding it but it would reappear anyway, and same after disabling it as though some part of it was burned-in to the set up. Also the fonts couldn't match the bolder font style of the status bar and it looked too dim/faint.
Magisk, as you're saying too now, was the real game-stopper because even though it said I'm rooted I was still getting ads despite using AdAway. Tried another fresh install (wiped, reinstalled ROM) this time not updating Magisk Manager (uninstalled it) then trying SU 2.82 which seemed to work much better rooting-wise, but then had the camera & wifi issues because the .67 kernel isn't modified yet.
So I had to go back to my .33 backup but hope you'll keep at this when we get a patched kernel for the upgraded versions. I love the boot animation which really fits the ROM name and perfectly matches the black Moto boot logo I'm using. Could you possibly please extract that so we can use it on our old set ups, or if available separately provide a link? Again, many thanks for your efforts on this.
Dahenjo said:
I gave this a try since I really like debloated stock ROMs. Couldn't get the status bar clock to stay how I'd set it, then tried hiding it but it would reappear anyway, and same after disabling it as though some part of it was burned-in to the set up. Also the fonts couldn't match the bolder font style of the status bar and it looked too dim/faint.
Magisk, as you're saying too now, was the real game-stopper because even though it said I'm rooted I was still getting ads despite using AdAway. Tried another fresh install (wiped, reinstalled ROM) this time not updating Magisk Manager (uninstalled it) then trying SU 2.82 which seemed to work much better rooting-wise, but then had the camera & wifi issues because the .67 kernel isn't modified yet.
So I had to go back to my .33 backup but hope you'll keep at this when we get a patched kernel for the upgraded versions. I love the boot animation which really fits the ROM name and perfectly matches the black Moto boot logo I'm using. Could you possibly please extract that so we can use it on our old set ups, or if available separately provide a link? Again, many thanks for your efforts on this.
Click to expand...
Click to collapse
Just extract it from the ROM zip. Which u have downloaded from /system/media. There will be boot animation.zip. Copy this and paste it in your current ROM. Set correct permissions.(644). That's it!
sharan.nyn said:
Just extract it from the ROM zip. Which u have downloaded from /system/media. There will be boot animation.zip. Copy this and paste it in your current ROM. Set correct permissions.(644). That's it!
Click to expand...
Click to collapse
Thanks, I wasn't sure if it needed other file(s) than just the bootanimation.zip, but it worked fine. I guess this new one is called 'PiTwistedGeometry'.
@eskamhl I've switched over to .35 temporarily. For Magisk, it isn't working properly for several features. This ROM is really sweet. I also noticed the clock issue, but since I'm removing it, the "space" feature did work. I also had double battery % on lockscreen.
Hi all,
I just modified the module from @snowwolf725 to have a newer template so it can run on oreo rom
If you need to use nfc-sim on oneplus 3/3t you could try this module.
[Install]
1. Get Magisk
2. In the download area search for "OnePlus 3/t NFC Sim Enabler"
3. Reboot
4. If your manage app require permission you can give it at settings-apps-app permissions-additional permissions, toggle smartcardservice for it
I only test it on OOS Oreo ROM, it may not work on custom rom due to different framework built in.
You can report here so I'll check what other MOD have to add to make other ROM work.
the smartcardservice is modified from SEEK for Android by Johnzweng
Repo link
crazymika said:
Hi all,
I just modified the module from @snowwolf725 to have a newer template so it can run on oreo rom
If you need to use nfc-sim on oneplus 3/3t you could try this module.
[Install]
1. Get Magisk
2. In the download area search for "OnePlus 3/t NFC Sim Enabler"
3. Reboot
4. If your manage app require permission you can give it at settings-apps-app permissions-additional permissions, toggle smartcardservice for it
I only test it on OOS Oreo ROM, it may not work on custom rom due to different framework built in.
You can report here so I'll check what other MOD have to add to make other ROM work.
the smartcardservice is modified from SEEK for Android by Johnzweng
Repo link
Click to expand...
Click to collapse
Any chance that this mod used on htc m9 with aicp 13.1, rooted with magisk?
tombbb said:
Any chance that this mod used on htc m9 with aicp 13.1, rooted with magisk?
Click to expand...
Click to collapse
I don't think so, it's NFC chip specified so if you have a different device it's xml config would be different.
For m9 you could look through it's stock rom to adjust configuration, I believe the M9 stock ROM support NFC-SIM card.
What does nfc sim means?
prasant737 said:
What does nfc sim means?
Click to expand...
Click to collapse
In some places we have our payment/transportation card integrated in SIM card.
so we can use our phone to pay/take public transportation.
hi sir able to update it for oneplus 6t android pie?
laocheebye said:
hi sir able to update it for oneplus 6t android pie?
Click to expand...
Click to collapse
according your ID I assume you are Taiwanese, there is modification for oneplus 6 on mobile01, i think that will also work for 6t
I didn't have 6t so I can't test on it.
crazymika said:
according your ID I assume you are Taiwanese, there is modification for oneplus 6 on mobile01, i think that will also work for 6t
I didn't have 6t so I can't test on it.
Click to expand...
Click to collapse
i am singaporean actually. can u link me the thread? i can read chinese so its fine. thank you deep deep.
---------- Post added at 02:27 PM ---------- Previous post was at 02:12 PM ----------
i found the thread and the download link if anyone is interested to try for oneplus 6 or 6t.
forum link in chinese
flashable zip
i havent tried cos there is no decrypt twrp for 6t yet so at your own risk people.
I had asked about it to the author directly on github since since my test are not successful. No update since then...
https://github.com/Magisk-Modules-Repo/oneplus3simnfc/issues/2
NoobZik said:
I had asked about it to the author directly on github since since my test are not successful. No update since then...
https://github.com/Magisk-Modules-Repo/oneplus3simnfc/issues/2
Click to expand...
Click to collapse
I'll update this to pie compatible when oos pie released
crazymika said:
I'll update this to pie compatible when oos pie released
Click to expand...
Click to collapse
Hello, any news ?
Hi, just tried the latest v1.2.1, but it seems HamiPay detects root even MagiskHide enabled for it. Would you please share how to prevent HamiPay from detecting root? Thank you.
jekyll530 said:
Hi, just tried the latest v1.2.1, but it seems HamiPay detects root even MagiskHide enabled for it. Would you please share how to prevent HamiPay from detecting root? Thank you.
Click to expand...
Click to collapse
I think they changed the root detection, now it's can only use with iPASS, EasyCard or icash.
Creditcard function have been lock with rooted devices.
crazymika said:
I think they changed the root detection, now it's can only use with iPASS, EasyCard or icash.
Creditcard function have been lock with rooted devices.
Click to expand...
Click to collapse
Thank you for replying. The above seems work fine. Can this module be ported for OP5/T, 6/T (OOS 9.0) or even 7/Pro?
Cuvillier said:
Hello, any news ?
Click to expand...
Click to collapse
I've update to Pie rom, and confirm that we still can use sim NFC at it, just need some path adjustments, use the attached zip file replace your system/vendor/etc/libnfc-nxp.conf, put the SmartcardService folder in system/priv-app folder
add this line "persist.nfc.smartcard.config=SIM1,eSE1" in system/build.prop file, and should work as before.
I forgot how to make it into proper Magisk Module~the module i made tonight can't not be installed.... so strange. I'll update once i get it to work.
P.S.
I tried custom ROMs, they have many differences about NFC config, I can not get it to work even replace the framework and permission file, tried everything I know but still failed, maybe they missed something at more lower level.
updated for OOS Pie
I just found what's wrong.
Here's the updated Module for OOS Pie.
Later i'll update to Modules-Repo
jekyll530 said:
Thank you for replying. The above seems work fine. Can this module be ported for OP5/T, 6/T (OOS 9.0) or even 7/Pro?
Click to expand...
Click to collapse
@snowwolf725 have created the OP5 module, 6/6t have other method to make it working,but I need check some of it's file to make sure, op7 should work in theory, but it still depend on some rom configuration. I only have a op3t, do don't know how other models work.
Currently OOS have proper components (driver, config, frameworks...) installed, so it easier to enable them, for custom rom or future builds(which OP3 won't have)
I believe that require more adjustments to have this feature working.
crazymika said:
@snowwolf725 have created the OP5 module, 6/6t have other method to make it working,but I need check some of it's file to make sure, op7 should work in theory, but it still depend on some rom configuration. I only have a op3t, do don't know how other models work.
Currently OOS have proper components (driver, config, frameworks...) installed, so it easier to enable them, for custom rom or future builds(which OP3 won't have)
I believe that require more adjustments to have this feature working.
Click to expand...
Click to collapse
The OP5/T module is not available via Magisk download now. I'm currently using OP5 and will buy a 7 Pro. If you need, I can help testing.
crazymika said:
@snowwolf725 have created the OP5 module, 6/6t have other method to make it working,but I need check some of it's file to make sure, op7 should work in theory, but it still depend on some rom configuration. I only have a op3t, do don't know how other models work.
Currently OOS have proper components (driver, config, frameworks...) installed, so it easier to enable them, for custom rom or future builds(which OP3 won't have)
I believe that require more adjustments to have this feature working.
Click to expand...
Click to collapse
thanks but it doesn't work on lineage os 16. in logcat i get keymaster operation failed and unsupported digest on km1 hal issue. i hope you can fix it
regards
This module disables the ripple effect (flashing circles) when entering PIN code on the lock screen. I consider this a bad design, since anyone standing somewhere nearby could notice your PIN - these "special effects" make reading so easy. Google is not fixing this since Lollipop, so here's the Xposed module.
Download:
http://repo.xposed.info/module/ru.timjosten.disablepinripple
Donate:
Yandex.Money: 4100144375295
PayPal: [email protected]
Had anyone tested if this works on Oreo and OOS 5.1.11+?
Rajiv Patki said:
Had anyone tested if this works on Oreo and OOS 5.1.11+?
Click to expand...
Click to collapse
Works for me on Oreo 8.1
I still use this thing on 9 and 10.
Hello,
Do somebody have a copy of this one ? The xposed repo do not works anymore.
Thanks
maxdroid20 said:
Hello,
Do somebody have a copy of this one ? The xposed repo do not works anymore.
Thanks
Click to expand...
Click to collapse
Hi, please refer to my answer where I linked one APK that may be the one that you're looking for. Link: https://github.com/timjosten/XposedDisablePINRipple/blob/master/app/release/app-release.apk
Hi,
Got it and it's doing it's job
I replied to your other post
Thanks