Related
When experimenting with restoring a tarred backup of /data on my A43, I found that if you write data too rapidly to mmcblkp0, you get error -110, timeout. This was a nuisance--I had to slow down the file writing. The OS handled this error pretty badly. tar basically hung and I had to reboot.
Maybe I'm the only person backing up with tar, so it's not a big deal. But more seriously, I think this problem is going occurs in more normal usage situations. It's going to occur whenever a large amount of data gets written to /data quickly. A fast backup restore will do it, but the standard backup programs may be slow enough that it's not an issue. There might be other cases.
The Maemo community has had this problem with external SD cards, and the consensus is that the kernel's mmc driver has buggy timeout logic: instead of setting timeout to the maximum value, it tries to set a smaller value when the card calls for it. There is a patch, which simply sets the maximum timeout value and which fixes the issue. The stock gen8 kernel has the same mmc driver and I assume the same fix would work (I don't have a build environment for kernel building set up yet).
I thought I'd post this--maybe this fix should go into people's custom kernels.
arpruss said:
When experimenting with restoring a tarred backup of /data on my A43, I found that if you write data too rapidly to mmcblkp0, you get error -110, timeout. This was a nuisance--I had to slow down the file writing. The OS handled this error pretty badly. tar basically hung and I had to reboot.
Maybe I'm the only person backing up with tar, so it's not a big deal. But more seriously, I think this problem is going occurs in more normal usage situations. It's going to occur whenever a large amount of data gets written to /data quickly. A fast backup restore will do it, but the standard backup programs may be slow enough that it's not an issue. There might be other cases.
The Maemo community has had this problem with external SD cards, and the consensus is that the kernel's mmc driver has buggy timeout logic: instead of setting timeout to the maximum value, it tries to set a smaller value when the card calls for it. There is a patch, which simply sets the maximum timeout value and which fixes the issue. The stock gen8 kernel has the same mmc driver and I assume the same fix would work (I don't have a build environment for kernel building set up yet).
I thought I'd post this--maybe this fix should go into people's custom kernels.
Click to expand...
Click to collapse
Moved to general as not android development
Sorry. I guess I am confused what is general and what is development. I was thinking that suggesting how to modify a kernel for greater stability is development. But maybe it doesn't count as development as I haven't tested whether the suggestion works.
OK, I built a kernel with this mod (I was pleasantly surprised by how easy it was--just git clone the Archos buildroot sources and kernel sources, put the kernel sources in the right directory, cd buildroot, make, and poof, a number of hours later a shiny working kernel plus a bunch of arm-linux tools). I can now consistently untar at full speed into /data without timeout errors, once. But if I try to do a second untar immediately after the first, I get timeout errors. So I think reliability has been improved, and I am happy with my backup solution.
Is omap_hsmmc.c the driver the Archos uses? If not, then of course the improvement is merely illusory.
See http://forum.xda-developers.com/showthread.php?t=1297738
https://wiki.ubuntu.com/ARM/TEGRA/AC100
"Adobe Flash
Dropping this library into ~/.mozilla/plugins allows flash playback. It warns though that it is out of date. http://kotelett.no/ac100/phh/Android2.2/libflashplayer.so"
Sounds great! =)
I did put this new Ubuntu Image on my AC100, however some things don't work:
* ppa ac100 produces error 404, package ac100-settings isn't found
* high background load, virtually unusable
* no shortcuts (old Imgae did support)
* no suspend (crashes), no sound yet
* did not get flash to work with above plugin
Anyone ha dmore success?
The flash plugin (even only playback) of this Ubuntu doesn't work for my Linux
Ubuntu 11.10 x Folio100?
Hi,
On http://cdimage.ubuntu.com/releases/oneiric/beta-2/ there is a "Preinstalled desktop filesystem archive" for Toshiba AC100. Is it possible to use drivers used in http://forum.xda-developers.com/showthread.php?t=907960 to prepare a version for Folio 100?
Thanks.
semonma said:
The flash plugin (even only playback) of this Ubuntu doesn't work for my Linux
Click to expand...
Click to collapse
I found a solution, now I have flash in Chromium. Doesn't work in Firefox (probably because I am running Version 7).
Instructions:
put the libflashplayer.so in the Chromium plugin directory (/usr/lib/chromium-browser/plugins), easiest way is by wget command:
sudo wget -O /usr/lib/chromium-browser/plugins/libflashplayer.so http://kotelett.no/ac100/phh/Android2.2/libflashplayer.so
install nvidea-tegra package
as it is not in the Oneiric repository yet I pulled this .deb and installed it via gdebi:
http://ppa.launchpad.net/ac100/ppa/...dia-tegra_12-0ubuntu1~alpha1monson6_armel.deb
I have no idea whether this is correct or latest, but it works to some extend.
Run chromium with
chromium-browser --allow-outdated-plugins
otherwise you get warning
360p Youtube runs smooth but when fullscreen has some slight lags, above resolutions do stutter.
Edit:
Here are some .deb packages of the main developer that seem to be newer. Did not test that. See the Readme: http://people.debian.org/~jak/ac100/README
Edit2:
With Beta 2 image and newest kernel (2.6.38-1000-ac100) the AC100 got quite usable now, sound via headphone works and performance bugs are largely reduced. Still some deadlocks by mmcd. Switching from ext4 to nilfs2 might yield some performance gain? And Debian hf, utilizing the Tegra FPU, also sounds promising.
Thank's a lot pibach, I'll try it this night =)
Brief update:
I added the developer ppa in sources list:
deb http://people.debian.org/~jak/ac100/ unreleased main non-free
and installed the package: xserver-xorg-video-tegra
it pulls in the package tegra-libraries
However I don't see any difference in video performace
nvidia-tegra package is not in there, package is stil unchanged
sudo apt-show-versions nvidia-tegra
nvidia-tegra 12-0ubuntu1~alpha1monson6 installed: No available version in archive
It is from this ppa: https://launchpad.net/~ac100/+archive/ppa
Seemingly this is for natty, does not seamlessly work with oneiric (Error 404 when added to sources.list as ):
"Changelog
nvidia-graphics-drivers-tegra (12-0ubuntu1~alpha1monson6) natty; urgency=low
* sigh, and build for the right release, oneiric doesnt work yet ...
-- Oliver Grawert <email address hidden> Tue, 05 Jul 2011 17:55:42 +0200"
However, it does work. Strange.
When I remove that nvidia-tegra package, I get some screen artefacts. Video then plays but very slow
Moreover, I can't find any xorg.conf file to set bit depth to 16 as mentioned in the Unbuntu Wiki.
So any chance to get better video (>360p) and maybe some HTML rendering boost?
Another hint: I got problems with Unity, Dash, Software Center bugging the CPU into performance problems, seems to be some memory lock with mmcd. Chromium 13 is also a lot faster, especially scrolling speed, than firefox 7 (both on smooth scrolling). But also runs into memory / CPU overload. Switching to lubuntu made all much snappier. It requires just 1 command:
sudo apt-get install lubuntu-desktop
and reboot into that one.
Maximus serves to undecorate the maximized windows -> more screen space
pibach said:
Moreover, I can't find any xorg.conf file to set bit depth to 16 as mentioned in the Unbuntu Wiki.
Click to expand...
Click to collapse
Thats probably because linux uses udev and dbus these days to detect your hardware on the fly when you start x.
Sent from my Folio 100 using xda premium
shidima_101 said:
Thats probably because linux uses udev and dbus these days to detect your hardware on the fly when you start x.
Click to expand...
Click to collapse
Yes, you're right. But that how it is described in the official ubuntu Wikipage. Strange. I have no glue how to do that nvidia tegra configuration.
When I launch Chromium-browser from terminal I get a lot of these errors:
ERROR:gl_surface_glx.cc(121)] glxQueryVersion failed
ERROR:gl_surface_linux.cc(73)] GLSurfaceGLX::InitializeOneOff failed.
So seemingly GLX Tegra hardware acceleration is not right.
BTW, the people at Arch Linux have more recent kernel and are on the status that suspend is working fine. Plus zram support there to come. See this thread. Don't know to what extend this will make the device snappier. Mine runs already quite snappy under LXDE.
I think with Linux on it the AC100 it is currently one of the best devices around. And you can get it quite cheap.
Edit:
On boot I usually get the error: unity support test closed unexpectedly
Probably something with GLX
Tegra shouldn't have any problems running Unity or Compiz.
Anybody got this to work propperly?
Edit2:
Launching Chromium in terminal:
chromium-browser --allow-outdated-plugins --use-gl=egl --ignore-gpu-blacklist
I get:
libEGL warning: GLX/DRI2 is not supported
To give you a brief status update:
I got suspend/resume to work
Flash works now in Firefox 7.0.1 (was already working in Chrome)
There seem to be a lot of work put into Ubuntu Oneiric and it's ARM version currently and it seems to be quite stable now.
On Folio100?
Is it usable on Folio 100?
The difference is only thouchscreen and Linux was already working (http://forum.xda-developers.com/showthread.php?t=907960).
Thanks.
gipposat said:
Is it usable on Folio 100?
The difference is only thouchscreen and Linux was already working (http://forum.xda-developers.com/showthread.php?t=907960).
Thanks.
Click to expand...
Click to collapse
but also Sound, Keyboard, NvEc, USB all might be slightly different. Isn't it?
pibach said:
but also Sound, Keyboard, NvEc, USB all might be slightly different. Isn't it?
Click to expand...
Click to collapse
No, I think everything is the same.
Bye
So, has anyone already tried it on Folio?
OK, I've given it a try and the boot image doesn't work, it definitely needs some porting.
hello pibach, thank you for your time testing stuff so we can make it work at the first time.
i installed drivers to make it work with flash, and its nice but sometimes i get a bug (probably due to graphic drivers making the screen get alot of artifacts, and only solution is a reboot, still a proble,m, probably due to alpha stage driver (nvidia could put something out that works decently....)
also, you say this version uses ext4? that should get it a lower performance comparing to nilfs (which i was using with phh's version) maybe disabling the journal? dont really know, will look into it.
how about changing the governor to performance instead of demand?
also...what about an SD card install? with a class 10 card should be fast? any info? worth buying a card to do it?
@Oinquer:
a) I got artifacts too, but only on Unity. I am on LXDE now and that works fine. Don't know why though.
b) I think you can choose ext4 or nilfs2 as you like. Can you point me to some links regarding performance comparisons and some more background info? I would give it a try then.
c) governor can be changed, sure.
d) the android bootloader cannot load from SD. But there might be some solution to do so, don't know. Meanwhile it should be no problem to have dual boot from internal MMC, for example Linux from partition 6 and android from partition 5 (SOS).
hello,
back to you, im using lxde now and installing the driver, hope artifacts go away.
EXT4 as far as i know has some benefits and some disavantages over ext3 and some other filesystems (checked yesterday after post), so performance might not change enough to notice.
governor , did it yesterday to performance, have to check flash playback now, but im not seeing big change except in boot time, that seems a few seconds less.
SD card, last version from phh's could be installed in SD card...and ubuntu wiki from AC100 says that if theres a blank SD card in slot at installation it will ask if you want to install there...im pretty sure its possible, but my sd card is in the trash bin, and cant buy one now...
here im hoping for the FPU stuff for the ac100...its getting there!!! quite usable, theres also a fix to have sound from internal speakers in ac100DOTgrandouDOTnet
will try it after i got everything sorted.
thank you for taking your time.
Sound is working in Ubuntu Oneiric Kernel that is in the proposed repository, works for me, but sound does not wake up after suspend yet.
SD card/USB boot does not work with Androib bootloader that is also used for Ubuntu Oneiric standard install. So you need to find one that can support that. Ccurrently there isn't any solution for that around, AFAIK. But you can put Linux on partition 6 and Android on Partition 5 and uses Android 2.1 bootloader.
Well, the time has come that I think my kernel is ready for public consumption.
THIS IS ONLY FOR THE USA VERSION OF THE GALAXY PLAYER 5.0 (YP-G70). If you have a mechanical home button instead of capacitive buttons at the bottom, do not flash this (rumirand has a kernel for you)! If you have a 4.0, do not flash this (SteveS has a kernel for you)!
Read the first three posts of this thread COMPLETELY before asking questions - if you ask a question that is answered in the first three posts, you WILL be flamed.
I'm continuing my Daily Driver name, even though it isn't as good of a name as it used to be. It is my daily driver - but what kernel dev doesn't use their own kernel as a daily driver? It made more sense in the Infuse days when I was running my own unreleased kernel for months and a few people asked for it. Oh well, I'm lazy - same name for now.
This is going to be maintained in the same manner and spirit as my other Daily Driver releases for the Samsung Infuse and Samsung SGH-I777 (AT&T Galaxy S II) - http://forum.xda-developers.com/showthread.php?t=1212795 and http://forum.xda-developers.com/showthread.php?t=1289460
It is built from sources at https://github.com/Entropy512/linux_kernel_galaxyplayer and initramfs at https://github.com/Entropy512/initramfs_yp-g70
Current features:
coolbho3k's Samsung Sleep of Death patch - allows stable use of screen-off profiles with limits below 800 MHz in SetCPU
netarchy's conservative governor tuning patch - Reduces the polling interval, allowing conservative to ramp up/down faster. Over in I9100 land they're calling this "lionheart" and it's all the rage. (It makes me sad when people won't accept a governor until it's renamed and hyped up way beyond what it is...) As an example, a GSII would take 0.4 seconds to ramp from 200 to 1200 MHz with the default conservative governor, it can go all the way in 0.1 second with this patch.
conservative set to default governor - use SetCPU or a similar app to change it
jhash3
TinyRCU
CIFS and Tunneling modules included
ext4 partition mounting support in kernel and initramfs thanks to rumirand - ghetto Lagfix baby!
CWM 5.0.2.7 based recovery - Mostly tested, seems working, but may have a few bugs still to work out, rumirand helped a lot on this one
Insecure kernel - gives you automatic root in ADB shells
Per-file fsync() disable capability - see "dangerous features" documentation below
Standard bootanimation (/system/media/bootanimation.zip) support
Charginghacks - faster charging at low battery, slightly slower near the end, overall faster charging while trying to minimize battery stress
CPU core voltage control - use SetCPU or a similar app
CPU overclock to 1.2 GHz - use SetCPU or a similar app
Planned features, short-term:
Pull a few other bugfix commits from my other kernels
Clean up CWM implementation
Planned features, mid-term:
Proper Voodoo Lagfix support (Automatic partition conversion instead of manual)
Planned features, long-term:
Overclock beyond 1.2 if people prove they can handle 1.2 with maturity (Infuse community couldn't handle any OC in a responsible manner...)
Features not planned:
Anything that has a high risk of trading off stability for performance, unless it can be completely disabled by default
Alternative governors - They almost always cause wacky behavior in some cases, and they don't offer anything that can't be done with a combo of SetCPU profiles and tuning the conservative governor now that the minimum poll rate has been dropped.
How to flash .tar releases:
Linux/MacOS:
I forgot that Heimdall doesn't like this particular device - you will need to use a Windows virtual machine with USB passthrough support (like VirtualBox) and Odin, or root the device using the zergRush exploit and follow the "rooted device" instructions. (Ambrice has a fixed version of heimdall, but it must be compiled from source. If you know how to do that you don't need tips on how to use it. )
Windows:
Enter download mode - Power off your device completely, hold VolDn, and insert the USB cable
Use Odin - Google it or search these forums for details - try AdamOutler's resurrector thread in this Development forum
Any rooted device:
Extract the zImage from the .tar file of the release. On Linux, it can be the following (which should work in an ADB or Terminal Emulator shell on the Player itself.)
Code:
tar xvf <releasefile>.tar
From a shell with root access (ADB or Terminal Emulator), do the following:
Code:
dd if=zImage of=/dev/block/mmcblk0p11
How to flash .zip releases:
Put it on your sdcard, enter CWM, flash the .zip using CWM
If you do not have CWM, install an older .tar release then flash, or follow the "Any rooted device" instructions above, but extract the zImage from the .zip instead of a .tar
3/5/2012 Release:
Overclocking to 1.2 GHz (use SetCPU or a similar app to enable)
Support for running scripts in /system/etc/init.d
3/3/2012 Release:
Voltage control (no overclock yet, coming next)
1/29/2012 Release:
charginghacks from Infuse: Charging current on a wall adapter raised to 800 mA at lower battery, dropping to 700, then 600 (stock), then 550 (slightly below stock) as battery voltage reaches maximum. This gives overall lower charge times while trying to not stress the battery too much.
Also, final charge termination happens earlier - while this results in slightly less battery capacity per charge, it will help the battery retain capacity over time.
1/23/2012 Release:
Initramfs: Standard bootanimation support. Place a standard bootanimation in /system/media/bootanimation.zip - Note: The "stock" bootup sound still plays.
1/22/2012 Release:
A few bugfixes and power management improvements pulled in from other kernels
Ability to disable per-file fsync() - good for benchmark epeen, potentially dangerous for your data
1/14/2011 Release:
Initial release
FAQ
Q: Why does CWM default to my external SD card for backup/restore/flashing ZIPs?
A: This is the standard for Android devices going forward - internal on /emmc and external on /sdcard
Q: How do I enter CWM?
A: Until ROMs come out that have extended power menu mods: Power off your device, then:
Hold VolUp
Hold Power
Release Power when the SAMSUNG screen appears (continue holding VolUp)
Release VolUp when CWM appears
Q: I'm still not rooted?
As stated in the features, an insecure kernel only provides root in an ADB shell. Either use ADB to push /system/bin/su and /system/app/Superuser.apk and chmod them to the correct permissions, or take the easy way out and flash ChainsDD's Superuser package in CWM - http://androidsu.com/superuser/
Q: I used ROM Manager to do something, and something weird happened/went wrong. Why?
A: ROM Manager has not worked properly on any device I have ever owned. It softbricked any Infuse that had Voodoo Lagfix enabled, and never works properly on the SGH-I777. The only thing I've ever seen it do right was install gapps on CM7 on the I777.
Q: My battery will never charge past 80%, why?
A: The way Samsung estimates state of charge on our devices is extremely primitive and, in general, poor. Instead of a dedicated fuel gauge IC, they have tried to estimate battery directly from voltage with some funky compensation offsets depending on current operating state - the offset for wall charging is so high that it is impossible for the battery to read higher than 80% when on a wall charger unless you're putting the device under heavy load to activate some of the other compensation offsets. Sometimes it seems like the compensation code doesn't "kick in" when plugging in a charger, allowing you to see a higher number, other times it'll get "stuck on" even after removing the charger. The general thing, though, is that any percentage estimates of battery state are WILDLY inaccurate.
Q: Can you implement Voodoo Sound?
A: No - We have the same audio chip as the Galaxy S2 and Galaxy Note (Yamaha MC1N2) - Voodoo Sound requires a Wolfson WM8994.
Documentation on "dangerous" features:
Per-File fsync() disable:
This allows you to disable per-file write forced syncs. (e.g. if an app tries to force a write straight to disk, it'll just go to cache). This achieves the same goal as the modded sqlite hacks seen in tweaks such as USAS, however it can be disabled at runtime.
WARNING: THIS CAN CAUSE DATA LOSS OR CORRUPTION IN A CRASH
To enable, do the following in a terminal, or add it to an init.d script (look at my ondemand script as an example):
Code:
echo "1" > /sys/module/sync/parameters/fsync_disabled
And to disable (return to the default):
Code:
echo "0" > /sys/module/sync/parameters/fsync_disabled
Good for around 200 points of epeen in the database benchmarks in Antutu or 500-600 points of epeen in Quadrant. Real-world benefit: Probably not worth the data integrity risk, but you've got a choice now.
*reserved for whatever the heck I forgot above*
Thanks a ton Entropy512!! Been waiting for this.
Going to have to buy you a six pack via the Donate button!
Congrats Entropy512. I'm really thankful for your cooperation.
Its finally here!! Thanks so much entropy
Nice job entropy! Good to see that there is at least some development going on for these devices. This makes me wish I got a 5.0 instead..but I'm stuck with a 4.0.
Sent from my YP-G1 using Tapatalk
Thank You
I myself along with others appreciate you developing for the Galaxy Player 5.0 it is a great music player and it falls in the Galaxy family its a good device
Sent from my Galaxy Nexus using Xparent Blue Tapatalk
Says we can use Odin...do see put this in a phone or pda slot
Zei said:
Says we can use Odin...do see put this in a phone or pda slot
Click to expand...
Click to collapse
PDA - only modems go in phone I believe.
Just like flashing any other kernel in Odin.
Edit: CRAP I have Heimdall instructions but Heimdall won't work on the Player... I'm so habitually used to Heimdalling...
Would a factory stock image + root + this be good enough to post if done w/ the backup/restore feature?
Zei said:
Says we can use Odin...do see put this in a phone or pda slot
Click to expand...
Click to collapse
Yes when you use odin you will need to put the rom in PDA slot.If yiu use heimdall you will need to extract and flash the files separatly.
I hope this helps.
---------- Post added at 11:53 AM ---------- Previous post was at 11:53 AM ----------
Entropy512 said:
PDA - only modems go in phone I believe.
Just like flashing any other kernel in Odin.
Edit: CRAP I have Heimdall instructions but Heimdall won't work on the Player... I'm so habitually used to Heimdalling...
Click to expand...
Click to collapse
Heimdall does work on the player. I use it.
Hmm... odd, I tried to use it and it gave me some odd errors I've never seen before (I forget what at the moment) and then put me into forced download mode. I know a pit-dump has some rather odd looking results. Maybe if I just try and flash a kernel it will work.
I'll try again later today, and edit the instructions if it works.
I have my Player shut off for most of today - I've been having strange battery drain problems on my GSII for the past week or so, only when at home - and it seems like it started when I got the Player. So I'm shutting it off to see if it actually is affecting my phone.
Edit: Heimdall still isn't working for me
Code:
Heimdall v1.3.1, Copyright (c) 2010-2011, Benjamin Dobell, Glass Echidna
http://www.glassechidna.com.au
This software is provided free of charge. Copying and redistribution is
encouraged.
If you appreciate this software and you would like to support future
development please consider donating:
http://www.glassechidna.com.au/donate/
Initialising connection...
Detecting device...
Claiming interface...
Attempt failed. Detaching driver...
Claiming interface again...
Setting up interface...
Checking if protocol is initialised...
Protocol is not initialised.
Initialising protocol...
Handshaking with Loke...
Beginning session...
Session begun with device of type: 0
Downloading device's PIT file...
PIT file download sucessful
Uploading KERNEL
100%
ERROR: Failed to confirm end of file transfer sequence!
KERNEL upload failed!
Ending session...
Rebooting device...
Re-attaching kernel driver...
After I flashed your kernel it won't let me connect to the market, my Wi-Fi is turned on and I connect to the browser just fine but not the market, help?
That's strange - no problems with market connections here. (Edit: Just updated BetterBatteryStats...)
Try rebooting?
Or wait a bit - sometimes the Market just goes down.
Entropy512, I've been studying your github and how you enable ext4 support in the kernel. Could you explain how you did it? I know it has to do with editing "/ arch / arm / configs / yp_g70_usa_defconfig" but I can't find that file in samsung's source or on Steve'S github. And after you do that you just edit the mount points in init.rc, right? I'm asking because I'm gonna try to get ext4 (lagifx) for my 4.0!
Thanks.
P.S. sorry if I'm a noob
klin1344 said:
Entropy512, I've been studying your github and how you enable ext4 support in the kernel. Could you explain how you did it? I know it has to do with editing "/ arch / arm / configs / yp_g70_usa_defconfig" but I can't find that file in samsung's source or on Steve'S github. And after you do that you just edit the mount points in init.rc, right? I'm asking because I'm gonna try to get ext4 (lagifx) for my 4.0!
Thanks.
P.S. sorry if I'm a noob
Click to expand...
Click to collapse
yp_g70_usa_defconfig was copied from venturi_usa_defconfig prior to modifying it - I decided to start maintaining my own defconfig rather than overwriting the original one.
Galaxy Player 4.0 is palladio instead of venturi. SteveS also uses a renamed defconfig though - something like steves_blahblahblah_defconfig
To change things for a 4.0, it would be something like
Code:
make steves_blahblahblahwhateverthisis_defconfig
make menuconfig (enable ext4 support in the menus here)
cp .config arch/arm/configs/steves_blahblahblahwhateverthisis_defconfig
git add arch/arm/configs/steves_blahblahblahwhateverthisis_defconfig
git commit
Entropy512 said:
yp_g70_usa_defconfig was copied from venturi_usa_defconfig prior to modifying it - I decided to start maintaining my own defconfig rather than overwriting the original one.
Galaxy Player 4.0 is palladio instead of venturi. SteveS also uses a renamed defconfig though - something like steves_blahblahblah_defconfig
To change things for a 4.0, it would be something like
Code:
make steves_blahblahblahwhateverthisis_defconfig
make menuconfig (enable ext4 support in the menus here)
cp .config arch/arm/configs/steves_blahblahblahwhateverthisis_defconfig
git add arch/arm/configs/steves_blahblahblahwhateverthisis_defconfig
git commit
Click to expand...
Click to collapse
Cool thanks! Will definitely try it out.
Hello,
I have installed Android-x86_64-7.1-r2 on my Baytrail tablet and it runs surprisingly well, but of course the usual Baytrail issues are present : No sound, no Bluetooth, Power button shuts down instead of suspend, no screen rotation, etc.
I got the touchscreen working by using the extracted Silead firmware from the Windows driver.
Now I read in another post on xda-developers that youling217's kernels from here
fix some of the issues and provides better compatibility with Baytrail devices, but I could not find any documentation about it. Is my assumption correct that these are Android-X86 kernels with Baytrail patches ?
If it is - Is there any documentation on what is patched in these kernels ? Patch files would be sufficient.
Secondly, how would I install the kernel binaries ? I read I can 'just copy' them onto the Android-X86 partition, but exactly which folders I have to copy where ?
Thanks...
jingjok87 said:
Hello,
I have installed Android-x86_64-7.1-r2 on my Baytrail tablet and it runs surprisingly well, but of course the usual Baytrail issues are present : No sound, no Bluetooth, Power button shuts down instead of suspend, no screen rotation, etc.
I got the touchscreen working by using the extracted Silead firmware from the Windows driver.
Now I read in another post on xda-developers that youling217's kernels from here
fix some of the issues and provides better compatibility with Baytrail devices, but I could not find any documentation about it. Is my assumption correct that these are Android-X86 kernels with Baytrail patches ?
If it is - Is there any documentation on what is patched in these kernels ? Patch files would be sufficient.
Secondly, how would I install the kernel binaries ? I read I can 'just copy' them onto the Android-X86 partition, but exactly which folders I have to copy where ?
Thanks...
Click to expand...
Click to collapse
ive been trying to get 7.1-r2 working on my baytrail (asus t200ta) for a while now. rc2 mostly worked but would hang fairly often. r2 seems to have fixed the hangs but now apps dont run. 100% of games just load the splash and sit there. sound, bluetooth, and power button, and touch all worked fine though. only issue was the rotation was backwards but found a property to correct it. i still cant get any apps to run right. do yours work? or do you even know with everything else dead?
Kirisakura-Kernel for the Sony Xperia 1 IV
Hello everyone,
To keep it short: Here is Kirisakura- GKI - Kernel for the Sony Xperia 1 IV aka Nagara. Nagara is the internal codename for this years development platform of Sony Mark IV devices.
I would appreciate if everybody that flashes the kernel, reads at least once through this opening post and the following ones.
Kirisakura - Kernel is designed to bring a handful of beneficial features to the device, while ensuring excellent performance and smoothness to get you safely through the day!
If you expect a custom kernel to magically improve your devices battery life manifold and this is your only priority then this might not be the right place for you.
There´s also a cpu-battery saver mode that cuts back the CPU max- freqs, but without the disadvantages like delayed notifications from built into the system user-space power-saving modes.
If that got your curious, I welcome you to continue reading if you´re still interested!
Now lets continue with a list of features in the next paragraph!
Main Features:
- Based on kernel/common 5.10.149
- compiled with Clang 12.0.5
- CPU-Battery saver to be able to restrict max cpufreqs on the fly, without enabling powersaving modes that might cause missed notifications (see second post)
- SSG IO scheduler for reduced overhead and less CPU cycles (more lightweight and android optimized)
- Power saving workingqueues enabled by default
- Change various drivers to use power efficient workingqueues. This compliments EAS in general
- implement LRNG (thanks @arter97, see arter kernel OP for more info )
- Enable support for TTL spoofing
- wakelock blocker with the ability to block any wakelocks (dangerous, use with caution)
- please read [URL="https://arstechnica.com/gadgets/2018/08/p-is-for-power-how-google-tests-tracks-and-improves-android-battery-life/"]this for further info
- f2fs improvments for better efficiency
- scheduler improvements
- psi fixes
- Flashing the kernel will keep root!
- Flashable via EXKM, FKM or TWRP (if available) on a rooted system!
Flashing Guide, Download and Changelog
Requirements:
- unlocked Bootloader
- USB-Debugging in developer options enabled
- latest adb and fastboot binaries
- working adb and fastboot environment
- magisk root
- a backup of stock boot.img or your magisk patched boot.img in case you want to go back to stock.
How to flash the Kernel:
1. Download the latest kernel.zip and make sure you have properly updated to the latest matching Firmware (check the feature list for the current firmware the source is based on). When there´s an OTA update for the Sony Xperia 1 IV it takes Sony a while to release the source code for the new OS and me a while to build a new kernel. If you don´t want to face any issues, wait until I either release an updated kernel or give green light because there were no kernel changes.
If you want to be sure there are no issues, always make sure to run the firmware the kernel is built for!
If you feel adventurous and try in advance, make sure you have a backup ready!
2. Flash the kernel.zip via latest TWRP (if available), EXKM or FKM app and do a full reboot.
3. Reboot and profit.
DOWNLOAD:
Download is located always in this folder, or attached to the release posts in case AFH is wonky.
https://www.androidfilehost.com/?w=files&flid=335705
Important: Read after Download
Please take a look at the second post after flashing the kernel!
Changelog:
Android 12
1.0.0 Initial Release
Android 13
1.0.0 https://forum.xda-developers.com/t/...-xperia-1-iv-aka-nagara.4480653/post-87711541
1.0.1 https://forum.xda-developers.com/t/...-xperia-1-iv-aka-nagara.4480653/post-87945391
1.0.3 https://forum.xda-developers.com/t/...-xperia-1-iv-aka-nagara.4480653/post-88241223
Donations:
Donations are not mandatory but very welcome if you want to support development or just buy me a coffee/tea
If you like my work: http://paypal.me/freak07
Credits:
Sony for the development device, giving me the opportunity to create this project!
@osm0sis for all his work, including the ak3 installer!
@tbalden for being the best HTC, Pixel, OnePlus and now Asus wingman!
@LeeDroid and @mwilky for their awesome roms and work I used on multiple devices!
@Captain_Throwback for all the mentoring and guidance!
@Eliminater74 for bringing me into the game and the Inspiration
@nathanchance for his upstream guidance and assistance
@RenderBroken for helping me out
@flar2 for all his work
@joshuous for all the help he provided to me in the past!
@arter97 for giving me advice
@kdrag0n for his help and advices!
@topjohnwu for magisk!
Source Code: https://github.com/freak07/Kirisakura_GKI_Nagara
F.A.Q:
Question: Is root preserved when flashing this kernel?
Answer: Yes, the AnyKernel.zip will detect root and keep it.
Question: Safetynet does not pass on my phone since I unlocked the phone, why is this so?
Answer: Google introduced hardware backed attestation recently. Unfortunately the old kernel tricks to still get safetynet passing won´t work. Instead you will have to rely on some magisk modules. Short guide in post #4 below.
Question: How do I return back to stock or another kernel.
Answer: Extract boot.img from the matching firmware you are on (you can do so by using this tool or similar ones found on XDA and when googling around) and flash via fastboot. If you want to keep root flash back the magisk_patched_boot.img. Or dirty flash your rom and re-root.
Question: Why is having Magisk installed mandatory for this kernel?
Answer: The kernel uses a ramdisk overlay to apply some settings after boot. If you are not rooted these settings will not get applied and you miss some of the optimizations.
Question: How to report bugs properly?
Answer: Have a look at post #3 in the linked thread. The linked guide is a pretty good starting point.
Before reporting any bug make sure you´re running on a stock configuration. That´s means you´re not using any mods, tweaks in kernel managers or other root tweaks , magisk modules, scripts or other modifications that alter various functions like sound mods, data traffic, sleeping behaviour, scheduler, magical battery tweaks etc.
Try to describe the issue as detailed as possible! Give your exact setup, like rom, magisk version, kernel version.
Is the issue reproducible? Does it happen frequently?
Provide logs, otherwise debugging is a lot harder. If you can already reproduce the issue and provide logs it greatly limits the amount of time I have to spent until I figure out how to reproduce it.
Feature Documentation:
Here´s a brief documentation about some of the features included in the kernel that can be changed as the user desires.
They can be accessed via either terminal, scripts or for example EXKM manager ( tools -> user settings).
CPU-Frequency Limiting:
Another option is CPU-Freq Limiting. You can now limit the CPU frequency to a few different levels with a sysfs interface. Original implementation is from @tbalden, I only changed it to be accessible via traditional root methods.
Main Switch:
sys/module/cpufreq/parameters/batterysaver
Set this option to "1" to enable the feature
Max-Frequency Selection (Input boosts, such as scrolling boost or app launching boosts will still apply, if touch boost restriction is not set to 1)
sys/module/cpufreq/parameters/batterysaver_level
Set this to "1" to restrict the max CPU-Freqs to 1,6GHZ/1,9GHZ/2,22GHZ (Little Cluster/Big Cluster/Prime Core)
Set this to "2" to restrict the max CPU-Freqs to 1,4GHZ/1,6GHZ/1,8GHZ (Little Cluster/Big Cluster/Prime Core)
Set this to "3" to restrict the max CPU-Freqs to 1,1GHZ/1,1GHZ/1,1GHZ (Little Cluster/Big Cluster/Prime Core)
Touch-Boost Restriction
sys/module/cpufreq/parameters/batterysaver_touch limiting
Set this to "1" to restrict the powerhal from boosting over the limit defined in batterysaver_level
Set this to "0" to allow the powerhal to boost above the values defined in batterysaver_level, but only during interaction with the Phone!
Screenshots:
View attachment 5309899View attachment 5309901View attachment 5309903
This is for example very useful during gaming to prevent additional heat, if not the highest performance from the CPU is required. Check if the game is running fine on level 1 or 2, and you´ll notice much less heat. Powerdraw will be reduced as well.
Another very useful trick while doing video calls or long extended navigation sessions with google maps to preserve battery or keep the phone from heating. Especially during summer if the ambient temperatures are high.
This is a very easy way to preserve battery or reduce heat without toggling the battery save mode in settings as that restricts background data usage, which can lead to delayed notifications.
How to pass Safetynet after unlocking the bootloader
With the introduction of hardware backed safetynet attestation, passing safetynet has become a lot more complicated.
Some probably remember a while ago, flashing a kernel that forced some flags was enough to pass it. However these days are gone.
Below is a short guide how to pass safetynet on phones that are flagged to use HW attestation (such as the ROG 5).
1. Make sure you´re running latest magisk canary.
2. In Magisk Manager enable both zygisk and deny list.
4. Download the latest Universal Safety Net Fix from @kdrag0n ´s github for zygisk cand flash it in Magisk Manager. Reboot.
5. Profit
Oh, my God! thank you so much for making the IV kernel
am I right to assume that CPU frequency limiting can help the phone not overheat when taking photos?
You are Awesome
tomatoketchup said:
am I right to assume that CPU frequency limiting can help the phone not overheat when taking photos?
Click to expand...
Click to collapse
yes. it should at least slow down the heat buildup. that´s the main goal behind it.
please note that 4k 120fps recording or other demanding tasks might not work without stutters if CPU gets restricted too much.
Apart from app loading times, if the usage is not super demanding level 3 works without major stutters in the UI on 120fps refresh rate.
htcmage said:
Oh, my God! thank you so much for making the IV kernel
Click to expand...
Click to collapse
Thaiban said:
You are Awesome
Click to expand...
Click to collapse
Freak07 said:
yes. it should at least slow down the heat buildup. that´s the main goal behind it.
please note that 4k 120fps recording or other demanding tasks might not work without stutters if CPU gets restricted too much.
Apart from app loading times, if the usage is not super demanding level 3 works without major stutters in the UI on 120fps refresh rate.
Click to expand...
Click to collapse
excellent <3, I don't need 4K 120fps recording I actually only do 1080p 24 because I like stabilization. so going to flash 64.0.A.8.25 and this kernel after that. million thanks!
It's a small amount, but I donated it, thank you always
htcmage said:
It's a small amount, but I donated it, thank you always
Click to expand...
Click to collapse
Thank you very much! I greatly appreciate it.
Hahaha... Hello my good friend @Freak07. Didn't know you were into Sony as well.
@Freak07 can you port it to xperia pro i ?
Developer, I have a question
If I use my work profile (shelter or island apk) I can't get into the settings menu I get a popup stating that the system UI is shutting down, maybe it's kernel related?
Should I uninstall Uperf before flashing?
Also thanks for this excellent work.
great work!Thx
to those who flashed, how is battery live ?
ist compüatible with latest sony update?
Would be interested to know, if it supports the old android kernels feature to emulate CD and DVD. Its a feature that DriveDroid needs to emulate a bootable DVD drive from an *.ISO hosted from an android device over USB. it was present in my older devices until XZ1 Compact and i was able to boot my pc off from a iso file hosted on my android device. It was much convinient than using silly PXE boot over eth0
No more update ?
Mrxyzl said:
No more update ?
Click to expand...
Click to collapse
OP will update when new Kernel sources are released and he has time. Mentioned in the first post.