Hello friends,
i patched the bootloader and unlocked by miunlock tool.
but now device id is not platina, now its wayne
fastboot possible but no screen shown.
how can i flash in fastboot mode it always show errors like missmatch and something like that
edl mode need auth
can someone help?
try to flash twrp by fastboot, shows error
C:\Users\TIC\Downloads\minimal_adb_fastboot_1.4.1_portable>fastboot devices
2a2ad4cf fastboot
Downloads\minimal_adb_fastboot_1.4.1_portable>fastboot flash recove
ry recovery.img
target reported max download size of 536870912 bytes
sending 'recovery' (58736 KB)...
OKAY [ 1.484s]
writing 'recovery'...
FAILED (remote: Anti-rollback check failed)
finished. total time: 1.507s
Why did you patch bootloader? You flashed a bootloader for another phone. I don't think you can fix it now. Anyways good luck! I hope you get it fixed.
Wtf why would you flash another phone's bootloader
Probleme solved.
You patch bootloader. Then unlock it by miunlocktool unofficial without account information. Then flash bootloader Original back again. Then you can flash by fastboot
halaxi said:
Probleme solved.
You patch bootloader. Then unlock it by miunlocktool unofficial without account information. Then flash bootloader Original back again. Then you can flash by fastboot
Click to expand...
Click to collapse
I would have found this hard to believe. However, I do believe you because we used a similar method to unlock the Leeco Le Pro 3 X727 version, and it also worked
halaxi said:
Probleme solved.
You patch bootloader. Then unlock it by miunlocktool unofficial without account information. Then flash bootloader Original back again. Then you can flash by fastboot
Click to expand...
Click to collapse
Hello, could you inform me how you carried out this process, it is that I have the same problem, I passed it to Mi6X, but now I cannot return it to Mi8lite. Thank you.
Hi everyone.
Yesterday I unlocked the bootloader of my P20 Lite through DC-Unlocked (paid 4 euro) and I rooted it by flashing a patched ramdisk. It was on android 8 because I had to roll back the version to allow DC-Unlocker to get the bootloader code. Anyways, I wanted to upgrade to android 9.0 again but I ran into a major issue. Like an idiot, I tried flashing the update through the TWRP, and so now the phone is hard bricked.
On boot, I get the ERROR MODE screen which gives
Code:
Func NO: 10(recovery image)
Error No: 2(load failed!)
I tried flashing every single .img possible from the UPDATE.APP, but that doesn't do the trick. One thing that I've noticed is that the RAMDISK partition seems to have vanished, because when I try to flash it through fastboot, it gives me
Code:
FAILED (remote: partition length get error)
So I don't actually know how to flash the boot partitions, which is probably the culprit of the issue. I can only flash KERNEL.img but not RAMDISK.IMG.
Oh, and also, as you may have guessed, I can't even boot in recovery anymore.
Now I'm trying to download a FULLOTA-MF which, they say, should unbrick the phone via forced DLOAD method.
Anyone had this experience? Thanks in advance.
andreasaracino said:
Hi everyone.
Yesterday I unlocked the bootloader of my P20 Lite through DC-Unlocked (paid 4 euro) and I rooted it by flashing a patched ramdisk. It was on android 8 because I had to roll back the version to allow DC-Unlocker to get the bootloader code. Anyways, I wanted to upgrade to android 9.0 again but I ran into a major issue. Like an idiot, I tried flashing the update through the TWRP, and so now the phone is hard bricked.
On boot, I get the ERROR MODE screen which gives
Code:
Func NO: 10(recovery image)
Error No: 2(load failed!)
I tried flashing every single .img possible from the UPDATE.APP, but that doesn't do the trick. One thing that I've noticed is that the RAMDISK partition seems to have vanished, because when I try to flash it through fastboot, it gives me
Code:
FAILED (remote: partition length get error)
So I don't actually know how to flash the boot partitions, which is probably the culprit of the issue. I can only flash KERNEL.img but not RAMDISK.IMG.
Oh, and also, as you may have guessed, I can't even boot in recovery anymore.
Now I'm trying to download a FULLOTA-MF which, they say, should unbrick the phone via forced DLOAD method.
Anyone had this experience? Thanks in advance.
Click to expand...
Click to collapse
Hello,
- In fastboot mode run commands:
fastboot oem get-build-number
fastboot oem get-product-model
fastboot getvar vendorcountry
fastboot oem oeminforead-CUSTOM_VERSION
fastboot oem oeminforead-SYSTEM_VERSION
and post the results.
-Alf- said:
Hello,
- In fastboot mode run commands:
fastboot oem get-build-number
fastboot oem get-product-model
fastboot getvar vendorcountry
fastboot oem oeminforead-CUSTOM_VERSION
fastboot oem oeminforead-SYSTEM_VERSION
and post the results.
Click to expand...
Click to collapse
Hi, thanks for your fast answer!
fastboot oem get-build-number
Code:
(bootloader) :System 8.0.0.046(09B8)
OKAY [ 0.012s]
finished. total time: 0.012s
fastboot oem get-product-model
Code:
(bootloader) ANE-LX1
OKAY [ 0.011s]
finished. total time: 0.011s
fastboot getvar vendorcountry
Code:
vendorcountry: ti/it
finished. total time: 0.012s
fastboot oem oeminforead-CUSTOM_VERSION
Code:
FAILED (remote: Read oeminfo failed!)
finished. total time: 0.019s
fastboot oem oeminforead-SYSTEM_VERSION
Code:
(bootloader) :ANE-LX1 8.0.0.151(C55)
OKAY [ 0.013s]
finished. total time: 0.014s
I don't know why but the CUSTOM_VERSION reading failed...
according to the results from the fastboot you have a branded phone, maybe a single sim?
Good news is that you are still on A8, bad news is "ti/it ".
Try this :
- Download and flash stock recovery_ramdisk for Oreo
recovery_ramdisk
Use command
fastboot flash recovery_ramdisk (file_name).img
Then try boot into recovery and let me know, thanks.
What is (was) your region in your phone build number ? (for example C432, C10, C185...)
-Alf- said:
What is (was) your region in your phone build number ? (for example C432, C10, C185...)
Click to expand...
Click to collapse
I think it's C55 , correct me if I'm wrong...
-Alf- said:
according to the results from the fastboot you have a branded phone, maybe a single sim?
Good news is that you are still on A8, bad news is "ti/it ".
Try this :
- Download and flash stock recovery_ramdisk for Oreo
recovery_ramdisk
Use command
fastboot flash recovery_ramdisk (file_name).img
Then try boot into recovery and let me know, thanks.
Click to expand...
Click to collapse
I tried, but doesn't work at all...
-Alf- said:
I think it's C55 , correct me if I'm wrong...
Click to expand...
Click to collapse
Yeah, it is C55. I don't know what to do anymore
andreasaracino said:
I tried, but doesn't work at all...
Yeah, it is C55. I don't know what to do anymore
Click to expand...
Click to collapse
recovery_ramdisk installing using command fastboot flash recovery_ramdisk etc.
was unsuccessful?
Have you tried boot into eRecovery? There's an option in eRecovery "Download latest ....."
andreasaracino said:
Hi everyone.
Yesterday I unlocked the bootloader of my P20 Lite through DC-Unlocked (paid 4 euro) and I rooted it by flashing a patched ramdisk. It was on android 8 because I had to roll back the version to allow DC-Unlocker to get the bootloader code. Anyways, I wanted to upgrade to android 9.0 again but I ran into a major issue. Like an idiot, I tried flashing the update through the TWRP, and so now the phone is hard bricked.
On boot, I get the ERROR MODE screen which gives
Code:
Func NO: 10(recovery image)
Error No: 2(load failed!)
I tried flashing every single .img possible from the UPDATE.APP, but that doesn't do the trick. One thing that I've noticed is that the RAMDISK partition seems to have vanished, because when I try to flash it through fastboot, it gives me
Code:
FAILED (remote: partition length get error)
So I don't actually know how to flash the boot partitions, which is probably the culprit of the issue. I can only flash KERNEL.img but not RAMDISK.IMG.
Oh, and also, as you may have guessed, I can't even boot in recovery anymore.
Now I'm trying to download a FULLOTA-MF which, they say, should unbrick the phone via forced DLOAD method.
Anyone had this experience? Thanks in advance.
Click to expand...
Click to collapse
I did this once to my kiwi (5x) then it went totally blank when i tried flashing an Huawei related system flashing tool. Do not try that.
-Alf- said:
recovery_ramdisk installing using command fastboot flash recovery_ramdisk etc.
was unsuccessful?
Have you tried boot into eRecovery? There's an option in eRecovery "Download latest ....."
Click to expand...
Click to collapse
I can't manage to boot in eRecovery, I always get the Func No error...
But the flashing was successful, only it doesn't fix the issue with the recovery.
andreasaracino said:
I can't manage to boot in eRecovery, I always get the Func No error...
But the flashing was successful, only it doesn't fix the issue with the recovery.
Click to expand...
Click to collapse
Okay, try this way out...
- download Service ROM
- unpack, extract from UPDATE.APP files:
CUST.img, RAMDISK.img, SYSTEM.img , RECOVERY_RAMDISK.img using Huawei update extractor, and flash .img files through fastboot. (CUST.img can be found in second UPDATE.APP (update_sd_ANE-L01_hw......zip) folder.
-Alf- said:
Okay, try this way out...
- download Service ROM
- unpack, extract from UPDATE.APP files:
CUST.img, RAMDISK.img, SYSTEM.img , RECOVERY_RAMDISK.img using Huawei update extractor, and flash .img files through fastboot. (CUST.img can be found in second UPDATE.APP (update_sd_ANE-L01_hw......zip) folder.
Click to expand...
Click to collapse
Thank you very much Alf for your time, but I finally managed to unbrick the phone by dloading the FULLOTA-MF of which I wrote about in OP.
andreasaracino said:
Now I'm trying to download a FULLOTA-MF which, they say, should unbrick the phone via forced DLOAD method.
Click to expand...
Click to collapse
andreasaracino said:
Thank you very much Alf for your time, but I finally managed to unbrick the phone by dloading the FULLOTA-MF of which I wrote about in OP.
Click to expand...
Click to collapse
then it is not FULLOTA-MF but Service ROM, bro ...okay, it doesn't matter now.
Current status of my phone:
I unlocked my bootloader via @huaweihax method (SLOCK). I couldn't install the 4pda zip thingy that unlocks your bootloader permanently and prevents EMUI 9 from locking your bootloader. Is there any alternatives for that?
I want to install Android 11 on my phone.
My phone is ANE-LX1 (vendor: hw, region: eu).
How can I install LineageOS 18 without losing my unlocked bootloader and my root?
Currently I have EMUI 8 installed with May 2018 security patch.
I have Magisk installed (that app gives me root access).
With the help of ROM Manager I booted into 3.2.1-0 Catuva21 TWRP recovery and finally, I could flash that 4pda zip file! ROM Manager is not neeeded but it makes things easier.
Hmmm, apperantly it was supposed to factory reset my device but I think I selected the wrong thing on my device. I guess what you choose is highlighted in white and not red. Here's the output of fastboot:
Code:
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot oem unlock TishSerg_For4pda
...
(bootloader) The device will reboot and do factory reset...
FAILED (status read failed (Unknown error))
finished. total time: 38.370s
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot oem unlock TishSerg_For4pda
...
FAILED (remote: already fastboot unlocked)
finished. total time: 0.012s
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot reboot
rebooting...
finished. total time: 0.027s
Should I be worried about this?
If you have flashed theTishSerg_For4pda zip you should be able to do
fastboot oem unlock TishSerg_For4pda
which should give you the warning screen with the red and white yes/no options.
I upgraded from stock 8.0 to stock 9.1 (dload method) and was able to unlock my bootloader again using the same command. I could then flash LOS 17.
Edit: if I remember correctly, I flashed the zip with a TWRP-oreo-smart.img recovery.
An3skmbi said:
If you have flashed theTishSerg_For4pda zip you should be able to do
fastboot oem unlock TishSerg_For4pda
which should give you the warning screen with the red and white yes/no options.
I upgraded from stock 8.0 to stock 9.1 (dload method) and was able to unlock my bootloader again using the same command. I could then flash LOS 17.
Edit: if I remember correctly, I flashed the zip with a TWRP-oreo-smart.img recovery.
Click to expand...
Click to collapse
Thanks!
Yap, I figured this out eventually. If anyone else is looking to do this, follow this!
I am new here and this was my first time actually trying any of this. I have my bootloader code, if that helps.
Phone turns on to erecovery mode if powered on normally. Running erecovery downloaded and installed RNE-L21 8.0.0.355(C185). It then asked me to Factory reset, after which it booted back in to erecovery. I can put phone in FASTBOOT&RESCUE MODE by plugging it in to PC and holding power + vol. down.
About Phone
-code
DC-unlocker:
manufacturer - Huawei phones
model - Huawei phone in fastboot mode
Found Phone : RNE-L21
Model : Huawei phone in fastboot mode
IMEI : 868859036054492
Serial NR. : FFY5T18224032295
Firmware : RNE-L21 8.0.0.355(C185
IMEI1:868859036074508
FB LockState: LOCKED
I wanted to downgrade from Oreo to Nougat.
To unlock bootloader, I used Potatonv:
GitHub - mashed-potatoes/PotatoNV: Unlock bootloader of Huawei devices on Kirin 960/95х/65x/620
Unlock bootloader of Huawei devices on Kirin 960/95х/65x/620 - GitHub - mashed-potatoes/PotatoNV: Unlock bootloader of Huawei devices on Kirin 960/95х/65x/620
github.com
I installed the TWRP in this post:
TWRP For Mate 10 lite 8.0 Oreo Version For RNE-L21C185
Here is twrp for HUAWEI MATE 10 LITE. Who want? Comment Here. :p
forum.xda-developers.com
I booted in to TWRP with
-code
adb reboot recovery
I made a backup using TWRP but I lost it and couldn't make another one because of some error in TWRP.
I then installed magisk .zip file through TWRP.
The phone would boot in TWRP no matter which option I chose in the Reboot menu of TWRP. Being really impatient, I decided to flash another version of TWRP on recovery partition, with SD card, through TWRP itself. I got this 2nd TWRP from:
How to Install TWRP Recovery and Root Huawei Mate 10 Lite
In this article, we will guide you on how to root Huawei Mate 10 Lite and Install TWRP Recovery.
clickitornot.com
The new TWRP doesn't work and phone does not show bootloader unlocked warning anymore. Upon rebooting after new TWRP, phone showed this error first few times.
I'm not really sure what to do but I figured I'd run some commands that might help someone figure out what I should do.
fastbootoem get-product-model:
(bootloader) RNE-L21
OKAY [ 0.025s]
finished. total time: 0.026s
fastboot getvar vendorcountry:
vendorcountry: hw/meafnaf
finished. total time: 0.025s
fastboot oem get-build-number:
(bootloader) :RNE-L21 8.0.0.355(C185)
OKAY [ 0.026s]
finished. total time: 0.027s
fastboot getvar rescue_enter_recovery:
getvar:rescue_enter_recovery FAILED (remote: FAIL:need all image flashed!)
finished. total time: 0.063s
fastboot oem oeminforead-SYSTEM_VERSION:
(bootloader) :RNE-L21 8.0.0.348(C185CUSTC185D1)
OKAY [ 0.031s]
finished. total time: 0.031s
I believe the rom for my phone is
RNE-L21 8.0.0.348(C185CUSTC185D1)I have downloaded it from https://gsmfreehelperteam.blogspot.com/2020/04/rne-l21-800348c185custc185d1-file-by.html but I really don't know what to do with it and I don't want to mess it up any further. Sorry for the long read, any help would be great.
brokenpotato said:
Upon rebooting after new TWRP, phone showed this error first few times.
Click to expand...
Click to collapse
- Flash stock Recovery from fastboot using command
fastboot flash recovery_ramdisk (....).img
- enter stock recovery and do factory reset
- Running OREO use this TWRP
brokenpotato said:
I wanted to downgrade from Oreo to Nougat
Click to expand...
Click to collapse
You can downgrade to Nougat using two methods :
1. Via HiSuite
2. Using HuRupdater tool & TWRP. Unfortunately, this method needs Firmware Finder and Huawei servers are offline. So via HiSuite only.
Don't try downgrade to the lower android version via dload method flashing service ROM (aka full stock firmware), it may brick your phone.
-Alf- said:
- Flash stock Recovery from fastboot using command
fastboot flash recovery_ramdisk (....).img
- enter stock recovery and do factory reset
- Running OREO use this TWRP
You can downgrade to Nougat using two methods :
1. Via HiSuite
2. Using HuRupdater tool & TWRP. Unfortunately, this method needs Firmware Finder and Huawei servers are offline. So via HiSuite only.
Don't try downgrade to the lower android version via dload method flashing service ROM (aka full stock firmware), it may brick your phone.
Click to expand...
Click to collapse
"fastboot flash recovery RECOVERY_RAMDISK330.img" gives:
target reported max download size of 471859200 bytes
sending 'recovery' (32768 KB)...
OKAY [ 1.055s]
writing 'recovery'...
FAILED (remote: Command not allowed)
finished. total time: 1.067s
brokenpotato said:
Command not allowed
Click to expand...
Click to collapse
= Locked bootloader or FRP lock
-Alf- said:
= Locked bootloader or FRP lock
Click to expand...
Click to collapse
IT does say "FRP Unlock" in red on fastboot&rescue screen. Should i try fastboot oem unlock?
brokenpotato said:
Should i try fastboot oem unlock?
Click to expand...
Click to collapse
Why not?
Fastboot oem unlock *************** worked, the phone booted up in to android and is working normally. Thank you so much!!
brokenpotato said:
Fastboot oem unlock *************** worked, the phone booted up in to android and is working normally. Thank you so much!!
Click to expand...
Click to collapse
No problem.
-Alf- said:
- Flash stock Recovery from fastboot using command
fastboot flash recovery_ramdisk (....).img
- enter stock recovery and do factory reset
- Running OREO use this TWRP
You can downgrade to Nougat using two methods :
1. Via HiSuite
2. Using HuRupdater tool & TWRP. Unfortunately, this method needs Firmware Finder and Huawei servers are offline. So via HiSuite only.
Don't try downgrade to the lower android version via dload method flashing service ROM (aka full stock firmware), it may brick your phone.
Click to expand...
Click to collapse
When trying to flash the TWRP, I get:
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot flash recovery TWRP-oreo-smart.img
target reported max download size of 471859200 bytes
sending 'recovery' (24790 KB)...
OKAY [ 0.794s]
writing 'recovery'...
FAILED (remote: partition length get error)
finished. total time: 0.809s
brokenpotato said:
fastboot flash recovery TWRP-oreo-smart.img
Click to expand...
Click to collapse
Read carefully.
brokenpotato said:
When trying to flash the TWRP, I get:
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot flash recovery TWRP-oreo-smart.img
target reported max download size of 471859200 bytes
sending 'recovery' (24790 KB)...
OKAY [ 0.794s]
writing 'recovery'...
FAILED (remote: partition length get error)
finished. total time: 0.809s
Click to expand...
Click to collapse
Just realized I had to flash twrp on recovery_ramdisk and not on recovery. It works like a charm