Related
Hello, I have a rooted xperia mini pro SK17i and I'm stuck to the CyanogenMod ROM 7.2.0 which seems to be the only one to work with my device.
I have written to you in the past to ask: "Why the wifi stops working if I try to install the cm-9.0.0, or 9.1.0-cm, or 10 cm-.........? ?? "
but no one has ever found a solution or the solution just did not work ...
I know from what I see in the forums that mine is a very common problem.
Now, years later, I ask again the same thing: "What should I do to install a more recent rom without losing the wifi?"
hello
frenksisco said:
Hello, I have a rooted xperia mini pro SK17i and I'm stuck to the CyanogenMod ROM 7.2.0 which seems to be the only one to work with my device.
I have written to you in the past to ask: "Why the wifi stops working if I try to install the cm-9.0.0, or 9.1.0-cm, or 10 cm-.........? ?? "
but no one has ever found a solution or the solution just did not work ...
I know from what I see in the forums that mine is a very common problem.
Now, years later, I ask again the same thing: "What should I do to install a more recent rom without losing the wifi?"
hello
Click to expand...
Click to collapse
wifi is defend by your kernel install.. try use another kernel like cm10 or cm11 and make full wipe n install your rom again.. or switch to another kernel and rom..
When I installed the cm-9.0.0 I used its kernel and I did the same with the 9.1 and the 10 ... did not work ..
But maybe I did not understand. You say, for example, if I install the 9.1 should I try Kernell of 10? Does it make sense?
Please........ :crying:
Does WiFi work on Stock ICS 0.587 firmware ?
I am ashamed but I do not know what it is ...
I'm no expert, I have not yet figured out a lot of things ... I'm still learning ...
I followed a guide to root my device and install the cyanogen rom.
If I look in the device info read:
Kernel: 2.6.32.9-FXP root @ ubuntu # 6
Android version: 2.3.7
This is all I know ...
Before roottare the phone I upgraded the original operating system of the phone and the wifi stopped working.
Precisely for this reason I decided to install the CyanogenMod ROM: to try to recover the wifi.
The cm 7.2.0 did it. The newer versions like 9, 9.1 did not work ....
My question is .... why??? it is obvious that it is not a hardware problem ...Because if it were so it would not work even with cm 7.2.0 ...
I'd like to update my device to the latest stable CyanogenMod rom for my device which is 9.1 ..
But I can not because the wifi stops working ... Heeeeelp!!
frenksisco said:
I am ashamed but I do not know what it is ...
I'm no expert, I have not yet figured out a lot of things ... I'm still learning ...
I followed a guide to root my device and install the cyanogen rom.
If I look in the device info read:
Kernel: 2.6.32.9-FXP root @ ubuntu # 6
Android version: 2.3.7
This is all I know ...
Before roottare the phone I upgraded the original operating system of the phone and the wifi stopped working.
Precisely for this reason I decided to install the CyanogenMod ROM: to try to recover the wifi.
The cm 7.2.0 did it. The newer versions like 9, 9.1 did not work ....
My question is .... why??? it is obvious that it is not a hardware problem ...Because if it were so it would not work even with cm 7.2.0 ...
I'd like to update my device to the latest stable CyanogenMod rom for my device which is 9.1 ..
But I can not because the wifi stops working ... Heeeeelp!!
Click to expand...
Click to collapse
i think you ALLWAYS forget to flah the needed kernel. (& allways have this old GB kernel) so only wifi works with this.
you should make sure you following the install EXACTLY.
also cm 9.1 is old like hell. this is also no stable release. at least i wouldnt call it like that.
Look for LX (Legacy xperia) which provides cm10.1 , 10.1 (jb) & 11 (kitkat) this is far more stable. also many bugs fixed there.
cm 9(.1) is abdonned long time
First of all .. Thank you so much for your help.
Ok .. I'll try .. I'm just worried because in thr LegacyXperia site I see a lot of bugs in the Working / not working lists..
frenksisco said:
First of all .. Thank you so much for your help.
Ok .. I'll try .. I'm just worried because in thr LegacyXperia site I see a lot of bugs in the Working / not working lists..
Click to expand...
Click to collapse
ok good luck this time all works incl. wifi (should work 100% if doing all right)
i think the best is to test a rom 1st so you can say how it fits your usage . just a few tips:
-use minimal gapps after flashing rom
-LX 10.1 has a release candidatefrom march this year its a pretty stable daily driver. dont use the 10.2 release theres nothing better..
-maybe also you can test cm11 if want, but keep in mind 19/3 is the last PMEM build which is based on old kernel, will probably deliver the stablest experience. IMO the latest release is also very good but this contains some bug like the ANDROID_OS wakeclock (need power on phone on charger to avoid this) & its still in development (so its more for dev users)
for the buglist:
CM10.1:
- maps flickering its true but fixed in CM11
- wifi gets drops sometimes .. but it work at all
- camera is not good quality/buggy bcuz of driver lacks (also no 720p video)
CM11:
- sometimes wifi a lil bit buggy but its minimal. works like a charm for me
- 720p video is working here
BOTH:
-sometimes bluetooth battery drain after using it (need reboot to fix) i not face this is issue when i send something to friend.... (works normal..)
- NO FM radio, HDMI port will not work (if you have one) & ANT+ (no drivers)
good luck for you
Yesterday I installed the CM11 and ... it works!!!!
The wifi works! :good:and I like the rom.:good::good: ... so ... thanks a lot bejunk!!!! thanks thanks a lot!!!!! You are a great!!
frenksisco said:
Yesterday I installed the CM11 and ... it works!!!!
The wifi works! :good:and I like the rom.:good::good: ... so ... thanks a lot bejunk!!!! thanks thanks a lot!!!!! You are a great!!
Click to expand...
Click to collapse
np bro im happy you have now good rom & working wifi
just 1 thing if you use the latest version (02/07) it has a bug that you get android os battery drain. you can solve this by:
-power off phone
-plug in into charger & wait till you see the battery logo
-power on . done
Thanks again! The only problems with this rom are:
- the phone takes a long time to boot. Almost two minutes ... every time ..
- When the device starts up many icons disappear and others are in different positions ... I do not know why ...
Is there a way to fix these problems? Maybe I did something wrong during the installation ...
frenksisco said:
Thanks again! The only problems with this rom are:
- the phone takes a long time to boot. Almost two minutes ... every time ..
- When the device starts up many icons disappear and others are in different positions ... I do not know why ...
Is there a way to fix these problems? Maybe I did something wrong during the installation ...
Click to expand...
Click to collapse
There's a Q&A section for that ROM. Anyway, long boot time should be fixed in the upcoming release. The simplest way to fix disappearing icons problem is to install another launcher. Hope I've helped.
What Is CyanogenMod?
CyanogenMod is an aftermarket firmware for a number of cell phones based on the open-source Android operating system. It offers features not found in the official Android based firmwares of vendors.
SOURCES
Device source : https://github.com/karthick111/android_device_corsica_cm
Kernel source : https://github.com/karthick111/Hyper_CM11
PATCHES:
Patches taken from here and also included in device tree too: https://github.com/xenon92/android_patches/tree/cm-11.0
WHAT WORKS?
Wi-Fi + Tethering
Bluetooth
RIL (Calls, SMS, Mobile Data)
Dual SIM
Sensors (Accelerometer, Compass,)
Camera (photo + Recording)
Video playback
Audio (playback + Recording)
GPS
App2SD
Known Issues:-None
DOWNLOADS
ROM Version 1:
http://www.4shared.com/zip/Gv0uDzziba/CM11-MW_by_karthick_mostwanted.html?
ROM Version 2
Google drive
Google Apps: http://wiki.cyanogenmod.org/w/Gapps
ROM Version 3
https://www.androidfilehost.com/?fid=457095661767119153
CHANGELOGS:
Version 1: Initail build with
Version 2: Camcorder fixed
Version 3: Latest 2016-11-01 b/31618336 security patch
INSTALLATION GUIDE
1. Go to CWM recovery do wipe data/factory reset.
2. Install ROM
3. Install GAPPS
4. Reboot[/B]
========================================================================
================================================================================================
CREDITS:
pawitp
xenon92
Differences ?
Thank you for the effort. Could you also elaborate the differences between your rom and Dhinesh77's CM 11 rom ?
Differences
Main difference App2SD
Why does it moves the apps automatically? And the phone memory fills with so fews apps. What should I do? I have facebook, messenger, whatsapp and pou and can't install any more apps. Help.
The video guide is no more exists. can you please upload video for installing this rom.
Thanks!
5310
Hello,
does this ROM work on 5310 without issues?
Thanks in advance...
zhlvf
Can you make App2sd flashable for the stock rom?
Cristiano Lira said:
Why does it moves the apps automatically? And the phone memory fills with so fews apps. What should I do? I have facebook, messenger, whatsapp and pou and can't install any more apps. Help.
Click to expand...
Click to collapse
Download Link2sd (available on Google Play) and in the settings appears an option to define where the apps are going to be installed as default
This is what appears (I have it in Spanish)
Installation aborted
I did the wipe data/factory reset but it doesn't install
well, at least I could install v2
---------- Post added at 11:42 PM ---------- Previous post was at 11:23 PM ----------
any changelog between v1 and v2?
I have being examinating the ROM and I have seen less things in configurations than in Dhinesh´s version, but they are minimun compared to the App2SD. Now I have liberated a lot of memory, THANKS KARTHICK!
Hello iam from indonesian.
I have problem on my samsung s5312. When i flash CM11 i really like it. Simple, fast and many feature added.
But when my samsung turned off and i charge it, battery logo do not run properly. Battery logo stuck and the screen always wake !
But, before i flash CM 11 I never get problem like this in previous stock rom.
Thats all. Sorry for bad english. Hope you understand my problem.
Regard,
Muslosse
muslosse said:
Hello iam from indonesian.
I have problem on my samsung s5312. When i flash CM11 i really like it. Simple, fast and many feature added.
But when my samsung turned off and i charge it, battery logo do not run properly. Battery logo stuck and the screen always wake !
But, before i flash CM 11 I never get problem like this in previous stock rom.
Thats all. Sorry for bad english. Hope you understand my problem.
Regard,
Muslosse
Click to expand...
Click to collapse
Hi, I'm from Chile, the same happens to me but I don't care. I think the problem is with the kernel
muslosse said:
Hello iam from indonesian.
I have problem on my samsung s5312. When i flash CM11 i really like it. Simple, fast and many feature added.
But when my samsung turned off and i charge it, battery logo do not run properly. Battery logo stuck and the screen always wake !
But, before i flash CM 11 I never get problem like this in previous stock rom.
Thats all. Sorry for bad english. Hope you understand my problem.
Regard,
Muslosse
Click to expand...
Click to collapse
Actually, there is no way
Is it compatible with gt-s5312b??
karthick mostwanted said:
What Is CyanogenMod?
CyanogenMod is an aftermarket firmware for a number of cell phones based on the open-source Android operating system. It offers features not found in the official Android based firmwares of vendors.
SOURCES
Device source : https://github.com/karthick111/android_device_corsica_cm
Kernel source : https://github.com/karthick111/Hyper_CM11
PATCHES:
Patches taken from here and also included in device tree too: https://github.com/xenon92/android_patches/tree/cm-11.0
WHAT WORKS?
Wi-Fi + Tethering
Bluetooth
RIL (Calls, SMS, Mobile Data)
Dual SIM
Sensors (Accelerometer, Compass,)
Camera (photo + Recording)
Video playback
Audio (playback + Recording)
GPS
App2SD
Known Issues:-None
DOWNLOADS
ROM Version 1:
http://www.4shared.com/zip/Gv0uDzziba/CM11-MW_by_karthick_mostwanted.html?
ROM Version 2
Google drive
Google Apps: http://wiki.cyanogenmod.org/w/Gapps
INSTALLATION GUIDE
1. Go to CWM recovery do wipe data/factory reset.
2. Install ROM
3. Install GAPPS
4. Reboot[/B]
========================================================================
================================================================================================
CREDITS:
pawitp
xenon92
Click to expand...
Click to collapse
Is this ROM compatible with the gt-s5312b device?
And if it is, how van I avoid the "status 7" error? This ROM has no updater file for make possible an edition deleting the "assert" part!
Missing Drive uHID suport for joystick bluetooth
Missing uHID drivers for Joystick and Gamepad Bluetooth .. and Bug in Brightness
To fix bug can't adjust brightness on CM11 mw v3..
Download this zip : Fix Brightness
Flash this zip on recovery..
I hope the brightness working properly..
Sorry for my bad english.. :""v
Thanks to @karthick mostwanted and all dev from gts5312/gts5310
Audio not working on S5310
Rom works great on my S5310, I use my phone principally as a modem and for messaging but I recently got a new plan from my provider that gives me 1000 minutes of telephone credit, it was then that I realised that the speaker and microphone are not working, it does vibrate though. Any one know how to fix the audio? or I will just have to wait for a new rom for the S5310. I do use the camera and the CM12/13 versions currently seem to have problems with that.
atomicbob said:
Rom works great on my S5310, I use my phone principally as a modem and for messaging but I recently got a new plan from my provider that gives me 1000 minutes of telephone credit, it was then that I realised that the speaker and microphone are not working, it does vibrate though. Any one know how to fix the audio? or I will just have to wait for a new rom for the S5310. I do use the camera and the CM12/13 versions currently seem to have problems with that.
Click to expand...
Click to collapse
Bro try this one : https://www.androidfilehost.com/?fid=385035244224403140
I think this is the best rom for neo
cm-11-20161202-UNOFFICIAL-corsica.zip
Kristaps(Lv) said:
I think this is the best rom for neo
Click to expand...
Click to collapse
Thanks for the link, it is has the same kind of interface only in this rom everything works perfect for my S5310. Karthick111 has a lot of interesting files over there at androidfilehost. :good:
Hi,
I am learning to build android ROM and trying to build CM-11.0 for Karbonn Titanium S1 Plus (msm8610) a.k.a Phicomm C230WJA. In the last three months after lots of efforts I progressed up to getting working kernel and going past the boot animation.
Now, I am facing the following problems when running the ROM on actual device. Your help would be greatly appreciated.
Note: I am building it from source using CAF kernel, display and media.
1. After flashing, first boot gets past boot animation and only Top status bar appears. No launcher, no icons, no wallpaper nothing only Cyanogenmod's debugging icon, battery icon shows up, rest of the screen remains blank.
2. Second boot (reboot) does not get past boot animation.
3. When screen locks itself, it gets totally white. This also happens when phone is powered off and charger plugged in. I mean screen turn off issue.
4. Lock screen appears as it should be with background image and few icons etc.
Please let me know if you require anything related to above device.
Regards,
SDhi
SOLVED
Thanks.
I resolved all issues by myself.
1. Somehow CM-11.0 forced me to include (not inherit) vendor/cm/config/common_full_phone.mk file to build all CM apps.
2. White screen issue was related to Backlight. Made modification to kernel and problem has been resolved.
Regards,
Sameer Dhiman
Need help
i also want to flash my titanium s1 plus rom. can u provide instruction how to flash using ur method and give link about ur cynogen 11 rom.
suthar7777 said:
i also want to flash my titanium s1 plus rom. can u provide instruction how to flash using ur method and give link about ur cynogen 11 rom.
Click to expand...
Click to collapse
Suthar,
It is still work in progress. I am working hard to make stable kernel. This is an essential foundation part.
Regards,
SDhi
Have you made it ?
adwiit said:
Have you made it ?
Click to expand...
Click to collapse
Yes, an alpha version of CM-11.0 but I am not satisfied with the voice coming out specifically from earpiece during call. I can not understand what the person at other end is saying. He/She can hear me loud and clear. It appears there is some bug in CM-11.0 framework with dual sim phone.
To till date I have tried the followings
1. CM-11.0 voice call quality issue with earpiece only. Other things works fine except GPS.
2. CAF-4.4.4 GPS module gives kernel panic and crashes. Stock Proprietary blobs are not compatible.
3. Omnirom-4.4 does not support dual sim. Fastest ROM among the others. Trying to port dual sim support in Omni-4.4 chances of success is 1% or 2%.
4. CM-12.1 incompatible stock RIL Proprietary blobs. Same IMEI assigns to both SIM slots and SIM does not get detected.
5. Omnirom-5.1 same as CM-12.1
6. CM-13.0 build does not even start gives /.txt, /5.txt or /6.txt error and stops. CM-13.0 major bug.
7. Omnirom-6.1 unknown reason gives Kernel Panic and crashes.
Currently, giving a try to CAF-4.4.2. Let's hope for the best. I have already invested lot of time (days, nights, weeks and months) but the outcome is only failures but I have not given up. There is still hope remaining inside me.
Regards,
SDhi
Thanks a lot for that. I would like to try that one. Have you posted that on the forum ?
adwiit said:
Thanks a lot for that. I would like to try that one. Have you posted that on the forum ?
Click to expand...
Click to collapse
I did not publicized it because basic function not working properly (Earpiece voice quality issue).
I sent you PM, please check it.
Regards,
SDhi
adwiit said:
Thanks a lot for that. I would like to try that one. Have you posted that on the forum ?
Click to expand...
Click to collapse
Have you downloaded ?
In-Call audio issue has been fixed but I would require some time to polish the ROM before beta release.
CM-11.0 Unofficial ROM for Karbonn Titanium S1 Plus Beta version released.
http://forum.xda-developers.com/and...mm-c230wxx-t3517145/post70034757#post70034757
Time Appropriate Greetings fellas!!!
This is my take on the AOSP 6.0 for Lenovo K3 Note....
AOSP_VIBE is based on the latest VIBEUI Dev edition released for K3 Note by Lenovo and so it has the bugs that will be present in that release. This rom is developed with the idea to have the best of both words which is the simplicity of AOSP and the features of lenovo tied to K3 note, its a learning process for me and those who wish to test it or modify it are welcome to do it but please credit me and people in my credit section and also please comment in the thread what u have done to correct the bug because in the end all we need is Fully functioning ROM and knowledge of how to do it....
AOSP VIBE based on the latest firmware of VIBEUI with latest security updates. It is a cleaned up, no nonsense lighter edition. Face it, whatever rom we port it is not going to be better than VIBEUI compiled with the complete source of K3 note. So have the experience of AOSP in VIBE...have fun...
Known Bugs
Whatever the bugs listed for the latest vibeui.
this is a stable release....rooted, busybox, gapps, xposed but no MultiLanguage i.e only eng and cn...also replaced Maaxwave with DSP + which has Dolby, Beats, Surround, SRS, Clearaudio libs...
WARNING TEST THIS AT UR OWN RISK....BACKUP EVERYTHING U HAVE BEFORE DOING ANYTHING...
Boot into TWRP recovery
Wipe Dalvik Cache, Cache, System and Data
Flash the ROM
Reboot....
POST 1 Intro
POST 2 Changelog
ROM Download - AOSP VIBE Stable 1.3
AOSP VIBE Stable 1.3 Fix
ROM Screenshots
Created : 14/07/2016
Last Release : 18/07/2016
State : STABLE
Credits :
Lenovo for phone and software, hackerpower for the latest firmware, LeiShui, chainfire for supersu, osm0sis for busybox installation finally SuperR for SuperR's Kitchen with which the rom is made.
Stable 1
Initial release based on VibeUI DEV 3.5 1628
Stable 1.1
Updated to 1629, latest kernel, replaced Chrome with Naked Browser, fixed visual artifacts during brightness settings and lockscreen.
Stable 1.2
Fixed SecurityIT background setting issue, fixed random soft reboots during package uninstall changed the base rom from untouched 1629 to LeiShui 1629.
Stable 1.3
Now with preinstalled Gapps, xposed, init.d. Replaced Maaxwave with DSP+ which has Dolby, Beats, Surround, SRS, Clearaudio libs.
Thanks for the ROM
Thanks for the work and will come back after installing.
Thank you！Good work
Thanks! Installation went smoothly, however I did not continue testing due to lack of Playstore. Of course I could have added gapps. I continued with AOSP PURE 1.3 not as a daily driver.
Stable 1.2 with security it and reboot fixes up for download
Is phone correctly deep sleeping on this ROM?
Enviado de meu K3 Note usando Tapatalk
eteles said:
Is phone correctly deep sleeping on this ROM?
Enviado de meu K3 Note usando Tapatalk
Click to expand...
Click to collapse
never had an issue
st 1.3 released
everything is good except some module in xposed not working .
this rom is good!
would be better if dolby is pre-isntalled rather than dsp+ anyway just a minor problem, have removed the dsp and installed dobly. now its perfect!
this rom got some problem.
I think build.prop need to add ro.product.locale.region and ro.product.locale.language.
Because i notice my phone unable to find "dead trigger 2" and "unkilled " and after two line added. These game show in my play store.
And some xposed module unable to use it, wechatunrecalled.
Except this two minor bugs, this is a total good rom ! With good ram management.
Battery Backup and VR Mode?
Is the battery backup good? And is VR Mode present in the ROM?
Please update do dev 1631 cuz it's great rom! Btw I can't flash this version because of error 7 in twrp. Tried multiple times, downloaded twice and with different twrp versions
Wait. If the base is vibe dev.. how is it AOSP?
neocyke said:
Wait. If the base is vibe dev.. how is it AOSP?
Click to expand...
Click to collapse
I think they placed AOSP launcher on top of VIBE base and called it AOSP VIBE
neocyke said:
Wait. If the base is vibe dev.. how is it AOSP?
Click to expand...
Click to collapse
Its the mix of both
Can i flash it on my lenovo a7000-a plus?
ROM seems to work well. All major functions appear to be operational, and it is nice to see AOSP-ness (don't think that is a word, but hey). A few minor issues though:
Firstly, I removed the theme centre because it was frankly, annoying. I don't need themes, but one thing that gets broken during removal is the ability to select ringtones. I can download Zedge and pick something from there, but it's not the same. Is there a way to get the standard ringtone picker back?
Another little issue which does get annoying (I suppose you get used to it) is that scrolling acceleration seems to be exaggerated. I notice this on a lot of MTK ROMs, so I am not sure if this one is fixable.
The last little issue is that there is some Chinese text in the dialer and phone apps. I don't access to my K3 Note at the moment (I'm travelling and my mum uses it), but I was wondering how the Google Phone and Google Contacts app worked on this device:
https://play.google.com/store/apps/details?id=com.google.android.dialer&hl=en
https://play.google.com/store/apps/details?id=com.google.android.contacts&hl=en
If it were possible to replace the stock dialer and contacts app with the Google equivalent that would be awesome. If someone has some feedback that would be great. So far I am finding this the most stable ROM for this device
Edit: There's another issue, which I can't explain, how sometimes my internal storage goes "missing" and the entire contents of my internal storage gets moved to data/media/sdcard/, and the new internal storage becomes /data/media/sdcard/0, where there isn't any data. Really bizarre, and certainly disconcerting for my poor mum who now uses this phone.
I'm not responsible for any damage to your device of any sort.
By flashing this you take responsibility of anything that happens.
Process at your own risk!
If you want to check firmware - please make backup. Better to store all partitions, at least efs and may be modem.
Instructions
1. Install custom recovery - use my twrp
2. Download the zip(s) - firmware and Magisk\SuperSu additional packages (optional)
3. Backup all partitions (it least efs) and store somewhere - it need to do - because you can loose imei
4. Full wipe all
5. Flash firmware and Magisk\SuperSu
Information
My port based on:
firmware: A320FXXU3CRD4 (Galaxy A3 SM-A320F 2017) Android 8.0
kernel: J600GDXU1ARE2 (Galaxy J6 SM-J600F 2018) 3.18.14
Removed only knox and few features (nfc, fingerprint, radio)
Fixed touchwiz home app to allow rotate
Work
- ril (calls + mobile data)
- wifi (current fix is workaround, need to review) - it's working, but need wait to turn-on, on wizard it can take a lot of time, after boot it will turn-on more or less fast (20-30 secs after boot), once it turned-on - it will work correct till reboot
- sound\mic, vibra, hardware keys
- gps
- both sdcards
- flashlight
Known Issues
- bluetooth
- wifi issues (it's working, but need review, see comment above for wifi)
- camera (working only flashlight)
- keyboard (it's working, but working in phone mode, you can change firmware to tablet in build.prop, but in this case should be issues with download languages)
Links
LTE version:
1. 20180519: https://drive.google.com/file/d/1_z0Fk8PfkXhXucGd0EoXYpWM_GyHOD38/view?usp=sharing
WiFi version:
1. 20180519: https://drive.google.com/file/d/1n2ovJ27JhmeMY8w7Zk00eXCbzxjPjrG6/view?usp=sharing
TWRP
Use my twrp from https://forum.xda-developers.com/ga...-lineageos-14-1-android-7-1-2-nougat-t3706002
Sources
Kernel: https://github.com/Valera1978/android_kernel_samsung_exynos7870/
Thanks
Thanks to Samsung
Valera1978 said:
I'm not responsible for any damage to your device of any sort.
By flashing this you take responsibility of anything that happens.
Process at your own risk!
If you want to check firmware - please make backup. Better to store all partitions, at least efs and may be modem.
Instructions
1. Install custom recovery - use my twrp
2. Download the zip(s) - firmware and Magisk\SuperSu additional packages (optional)
3. Backup all partitions (it least efs) and store somewhere - it need to do - because you can loose imei
4. Full wipe all
5. Flash firmware and Magisk\SuperSu
Information
My port based on:
firmware: A320FXXU3CRD4 (Galaxy A3 SM-A320F 2017) Android 8.0
kernel: J600GDXU1ARE2 (Galaxy J6 SM-J600F 2018) 3.18.14
Removed only knox and few features (nfc, fingerprint, radio)
Fixed touchwiz home app to allow rotate
Work
- ril (calls + mobile data)
- wifi (current fix is workaround, need to review) - it's working, but need wait to turn-on, on wizard it can take a lot of time, after boot it will turn-on more or less fast (20-30 secs after boot), once it turned-on - it will work correct till reboot
- sound\mic, vibra, hardware keys
- gps
- both sdcards
- flashlight
Known Issues
- bluetooth
- wifi issues (it's working, but need review, see comment above for wifi)
- camera (working only flashlight)
- keyboard (it's working, but working in phone mode, you can change firmware to tablet in build.prop, but in this case should be issues with download languages)
Links
1. 20180519: https://drive.google.com/file/d/1_z0Fk8PfkXhXucGd0EoXYpWM_GyHOD38/view?usp=sharing
TWRP
Use my twrp from https://forum.xda-developers.com/ga...-lineageos-14-1-android-7-1-2-nougat-t3706002
Sources
Kernel: https://github.com/Valera1978/android_kernel_samsung_exynos7870/
Thanks
Thanks to Samsung
Click to expand...
Click to collapse
Thanks for job! Please some screenshots.
Hello.
Can i use your rom in sm-t580.
Gesendet von meinem SM-T580 mit Tapatalk
wp82 said:
Hello.
Can i use your rom in sm-t580.
Gesendet von meinem SM-T580 mit Tapatalk
Click to expand...
Click to collapse
I can build kernel for t580 for test
Valera1978 said:
I can build kernel for t580 for test
Click to expand...
Click to collapse
I have a t580 and i can test :RE
work in p585m?
Thanks for t580 version! I already did the test and it works very smooth and fast. I love it and much more than android nougat. I hope you can make the camera work, since that is the only thing that makes me come back nougat!
Thank you very much for this great project!
Hi when I want to add a Google Account, I constantly get 'settings stopped' popup. Also, I can't add my Samsung account
Hi! Does someone know how I can get Ctrl functionality back?
OMG! I didn't have any hope about this. Regarding the camera, what do you exactly mean by working flashlight? Does it mean there is no functional camera and only the flashlight works?
Thanks for your great work.
Enviado desde mi SM-T585 mediante Tapatalk
My only issue with this rom on sm-t580 is that my samsung account don't work. It shows Processing failed.
Gesendet von meinem SM-A320F mit Tapatalk
For these days I have returned to the stock rom. But in the next few days I will test this rom with more time and I will give my point of view. But in summary everything works very fast much better than in nougat and it is more pleasant, at least the little I could try. All tested in a tab to t580 wifi version
Things that do not work and others that have worked well (including those already mentioned by the OP)
- Bluetooth
-Camera (Only the flash works to use the flashlight)
- Always on display this feature does not work. Maybe it will not be compatible, I do not know.
- Wifi worked very well, no problems.
- Samsung themes seems to work (a feature that we do not have present factory and thanks to it is a port of a cell phone we can enjoy it)
- I did not have lags for the short time I used it
At the moment this is what I can comment. Thank you very much OP for this magnificent port! He's a genius!
@Valera1978
This is quite interesting port and ROM. Fact that, most of Tab A Series tablet may not see official Oreo (8.0), your ROM may come quite handy.
good job!
Hell yeah Valera!!! You read my mind right now! Right before I logged on I was like man I wonder how stock Oreo that's like on my Galaxy s8 would look on here! Thanks!
I installed the wifi version on T580 and it’s stuck on bootscreen, is it not the correct version?
BTslo said:
I installed the wifi version on T580 and it’s stuck on bootscreen, is it not the correct version?
Click to expand...
Click to collapse
did you do a full wipe before the flash? And the twrp used by the creator.
Gesendet von meinem HTC U11 mit Tapatalk
wp82 said:
did you do a full wipe before the flash? And the twrp used by the creator.
Gesendet von meinem HTC U11 mit Tapatalk
Click to expand...
Click to collapse
Yes, full wipe and even format data since it showed 0mn internal storage after the first flash. I used the official twrp since the modded one was only for t585
BTslo said:
Yes, full wipe and even format data since it showed 0mn internal storage after the first flash. I used the official twrp since the modded one was only for t585
Click to expand...
Click to collapse
Boot to twrp. Make a factory reset, than wipe data. Go back and wipe all, than install Rom. I hope this work for you.
Gesendet von meinem HTC U11 mit Tapatalk
alanloax said:
For these days I have returned to the stock rom. But in the next few days I will test this rom with more time and I will give my point of view. But in summary everything works very fast much better than in nougat and it is more pleasant, at least the little I could try. All tested in a tab to t580 wifi version
Things that do not work and others that have worked well (including those already mentioned by the OP)
- Bluetooth
-Camera (Only the flash works to use the flashlight)
- Always on display this feature does not work. Maybe it will not be compatible, I do not know.
- Wifi worked very well, no problems.
- Samsung themes seems to work (a feature that we do not have present factory and thanks to it is a port of a cell phone we can enjoy it)
- I did not have lags for the short time I used it
At the moment this is what I can comment. Thank you very much OP for this magnificent port! He's a genius!
Click to expand...
Click to collapse
In my spare time, try a little more. The account of samsung gives error in processing therefore the subjects can not be installed for example in addition to the synchronizations that this service offers you. In my case it is not of great importance, although it will be for other users.
I keep insisting that the system is very fast compared to nougat.
There are some problems due to the fact that it is an adaptation of a rom from a smartphone to a tablet. The keyboard is one, which is solved as the OP said by modifying the build.prop.
When applying a wallpaper, it does not look good in the horizontal format, it remains vertical. It is solved using other galleries / launchers. It's not a serious problem, it's just a detail I could observe.
Loading screen when the device is off, also presents problems of image resolution.
At the moment this is what I remember, I will detail more as soon as I can.
I repeat, I used the rom for wifi version in my t580 installed with the official twrp last version, after doing all the wipes and format data.
I congratulate the author of the rom, this is incredible! Thanks thanks!!!
Is there anyway to have the data partition decrypted? I've tried and it's still encrypted it.