How to solve Softbricked Redmi Note 4. Only fastboot mode working. When i try to flash fastboot rom then it says partition flashing not allowed. My bootloader is locked.
There is no edl mode in redmi note 4
Please help about this
sumitkhkh said:
How to solve Softbricked Redmi Note 4. Only fastboot mode working. When i try to flash fastboot rom then it says partition flashing not allowed. My bootloader is locked.
There is no edl mode in redmi note 4
Please help about this
Click to expand...
Click to collapse
Hi, This is the method for locked bootloader unbricking using a modified deep flash cable:
http://en.miui.com/thread-491655-1-1.html
Sent from my Redmi Note 4 using Tapatalk
Wilderone said:
Hi, This is the method for locked bootloader unbricking using a modified deep flash cable:
http://en.miui.com/thread-491655-1-1.html
Sent from my Redmi Note 4 using Tapatalk
Click to expand...
Click to collapse
i tried many methods dont know which method works for me. i think this method worked for me
Hello friends i´m new her. I hav an recently Note 4 with bootloop. I´m trying this mithod to solve the problem (already tried lots of methods without sucess) and in the step when to connect to pc and try to set adb, imediatly after conect to usb on pc the phone boots and keeps bootlooping after "MI mi.com" white symbol. Any ideas guys? Dont know anything more to do.... please help
zbrix said:
Hello friends i´m new her. I hav an recently Note 4 with bootloop. I´m trying this mithod to solve the problem (already tried lots of methods without sucess) and in the step when to connect to pc and try to set adb, imediatly after conect to usb on pc the phone boots and keeps bootlooping after "MI mi.com" white symbol. Any ideas guys? Dont know anything more to do.... please help
Click to expand...
Click to collapse
Follow this tutorial, make a deep flash cable as shown. This will work on RN4 SD version only. I am the one who got bootloop on RN4 SD first time and i made the new cable and did everything well.
http://en.miui.com/forum.php?mod=viewthread&tid=491655
this diy method not works tried it many time
sumitkhkh said:
How to solve Softbricked Redmi Note 4. Only fastboot mode working. When i try to flash fastboot rom then it says partition flashing not allowed. My bootloader is locked.
There is no edl mode in redmi note 4
Please help about this
Click to expand...
Click to collapse
Even I had this problem. However I fixed this. Try these steps
1.Press power button and volume+ button till you see Phone and USB cable picture.
2.Install lastest version of Chinese Mi Pcsuite (Don't use English version as it has some issues detecting your phone).
3. Now connect your phone to pc via usb cable
4. A popup menu will appear in Chinese. Select the second option which is factory reset.
5. After that the phone reboots and everything will work fine. However you will lose user data.
Yes but mine is MTK version?
Redmi note 4 Snapdragon
Hii friends I am new here .
My redmi note 4 Snapdragon is not starting and directly go into fastboot mode when I press power button phones is vibreat and show fastboot mode ..
Directly enter in fastboot ..plzzz help me...I have no idea how to fix this problem plzzz some one help me..plzzz
Read my post at discussion thread..... I can help..
The link
The link to how to deep flash doesn't work. Is there any other tutorial on making a deep flash cable?
sumitkhkh said:
How to solve Softbricked Redmi Note 4. Only fastboot mode working. When i try to flash fastboot rom then it says partition flashing not allowed. My bootloader is locked.
There is no edl mode in redmi note 4
Please help about this
Click to expand...
Click to collapse
enter fastboot mode
type fastboot oem edl to enter edl mode
use the mi flashing tool (not the flash unlock one) to flash the fastboot rom :good:
hi i was trying to update the framwork yesterday throw twrp evrything was going fine suddendly phone stopped and red light blinking started i searched for the solutions and some ever it was said remove the backpanel and disconnect the battery and reconnec the charger it will take u to fastboot but after doing this iam unable to get anything now the red blinking have also been stopped iam not getting what to do now can any1 help me out
thanks in advance
Anmol108 said:
hi i was trying to update the framwork yesterday throw twrp evrything was going fine suddendly phone stopped and red light blinking started i searched for the solutions and some ever it was said remove the backpanel and disconnect the battery and reconnec the charger it will take u to fastboot but after doing this iam unable to get anything now the red blinking have also been stopped iam not getting what to do now can any1 help me out
thanks in advance
Click to expand...
Click to collapse
Got out of it throw mi flash. Tool
Himanshu.kulkarni3 said:
enter fastboot mode
type fastboot oem edl to enter edl mode
use the mi flashing tool (not the flash unlock one) to flash the fastboot rom :good:
Click to expand...
Click to collapse
That command does not work anymore. Tried it, it says it rebooted it but the phone itself doesn't do anything but stay in fastboot mode
Related
Hello my friend just made an update of his phone which is a redmi 3 pro
His little bro shutdowned the phone while update was in process. The result is that now the phone have a bootloop, can't access the recovery (blackscreen when trying) and have a locked bootloader.
So I am not sur how to unlock the BL if I can't install a dev rom and can't boot. Not sur how to get into the recovery with the 2 same problems.
Could anyone help me for this one? Which is hard to me.
Thanks
PS: I tried to do something with unpacking boot and remove a ",verify" thing in the ramdisk but I guess I'll need the unlockedbootloader to flash the new boot.img?
Kicroy said:
Hello my friend just made an update of his phone which is a redmi 3 pro
His little bro shutdowned the phone while update was in process. The result is that now the phone have a bootloop, can't access the recovery (blackscreen when trying) and have a locked bootloader.
So I am not sur how to unlock the BL if I can't install a dev rom and can't boot. Not sur how to get into the recovery with the 2 same problems.
Could anyone help me for this one? Which is hard to me.
Thanks
PS: I tried to do something with unpacking boot and remove a ",verify" thing in the ramdisk but I guess I'll need the unlockedbootloader to flash the new boot.img?
Click to expand...
Click to collapse
I have the similar problem with my Redmi3. The Fastboot screen is the only screen that I can get now. Let me know if you have answer. Thanks.
If you can acces fastboot then just connect the phone to computer in fastboot and enter fastboot oem edl in cmd (maybe you will need Minimal ADB and fastboot to do it). Then flash official ROM via MiFlash.
ohoh seems interesting then it won't say couldn't verify or smthg? will tell that to my friend asap, thanks
EDL mode allows flashing with locked bootloader. Some models have this mode locked, but I think that is not the case with Redmi 3.
Kicroy said:
ohoh seems interesting then it won't say couldn't verify or smthg? will tell that to my friend asap, thanks
Click to expand...
Click to collapse
to go to edl mode just turn off your phone.plug the cable to your laptop or desktop but not to your phone.now be ready to press both volume up and down button as you plug the usb cable to ur phone.immediately after inserting the usb cable press both volume buttons at the same time.it should vibrate and go to edl mode.edl mode appears in black screen so to know if its in edl mode or not open miflash and click refresh ,your device should be shown as com10,20 or com something like that .once you go to edl mode you know what to do if you have used miflash to flash roms.hope this helps you.
jokerpappu said:
to go to edl mode just turn off your phone.plug the cable to your laptop or desktop but not to your phone.now be ready to press both volume up and down button as you plug the usb cable to ur phone.immediately after inserting the usb cable press both volume buttons at the same time.it should vibrate and go to edl mode.edl mode appears in black screen so to know if its in edl mode or not open miflash and click refresh ,your device should be shown as com10,20 or com something like that .once you go to edl mode you know what to do if you have used miflash to flash roms.hope this helps you.
Click to expand...
Click to collapse
I have a problem with my redmi 3. It makes reboot and it does not charge if its not closed.
Can you help me to fix or do you now where i can find a solution.....
geuthym said:
I have a problem with my redmi 3. It makes reboot and it does not charge if its not closed.
Can you help me to fix or do you now where i can find a solution.....
Click to expand...
Click to collapse
Well about that i dont know.but your best bet to solve it is by changing the software.if that does not helps then you should take your device to a technician for repairing.
jokerpappu said:
Well about that i dont know.but your best bet to solve it is by changing the software.if that does not helps then you should take your device to a technician for repairing.
Click to expand...
Click to collapse
When i bouht it the software it was unnoficial then i put with miflash the china dev. All the problem start when i make updates apps and the android web view.
geuthym said:
When i bouht it the software it was unnoficial then i put with miflash the china dev. All the problem start when i make updates apps and the android web view.
Click to expand...
Click to collapse
try flashing official global rom then see if the problem still persists or not
Hey! I am back with some news of my friend!
He tried to run the EDL mode but when he does that the phone simply goes into the bootloop again... He asked a vendor from Aliexpress to get a french rom, is there a way that the phone doesn't have EDL because of the rom or something like that? I mean is EDL a hardware-thing or a software-thing
same problem
cukru said:
If you can acces fastboot then just connect the phone to computer in fastboot and enter fastboot oem edl in cmd (maybe you will need Minimal ADB and fastboot to do it). Then flash official ROM via MiFlash.
Click to expand...
Click to collapse
I have same problem, but this way is not work, because bootloader is locked. Im forget for replacing recovery.img in update package with twrp.
I had this problem before few monthes
my solution was to "force" putting this device on EDL mode
I clicked on vol up + vol down + power together and got into EDL mode, then miflash it.
google - xiaomi understanding download mode
it will send you into miui forum
then second method, download mode, it is what I've described
Hii Friends,
I am new to xda as i got an problem with my Redmi Note 3.
Specs Before Dead:
Miui 8.2.4
Android 6.0
32 Gb Rom,3 Gb Ram
I was trying to flash Android 8.0 Rom via Twrp {Flashed Through Mi Flash Tool}. Twrp Flashed Successfully and Then I started with flashing with Oreo Rom.It also got flashed successfully but the problem I think is I forgot to flash Lazy Flasher due to which the phone booted but was lock even though i entered the right password It started to reset the phone. Then the phone turned off never revived from there.
As I tried to power up many times and tried almost all the combination Keys like Power+Vol up,Power+Vol down,Power+Vol up+Vol Down,etc.Only Red Light is blinking while connected to charging or PC. In PC the Port shows Qualcomm 900E and cannot be recognized in Mi Flash Tool. As Mi flash tool detects Qualcomm 9008.Even I manually Tried to change the driver to 9008 but didn't help me to flash the ROM.Shown an error: Device attached is not working; in Mi Flash Tool
Even I showed in a repair center near me but he ended up with no solution even. I have been trying to get it in Edl mode so that i can flash Fast boot Rom but no clue for that.
If any clue for this would be really appreciated!!!
Your Believer
R$(Rishabh Sharma)
Thinker Hour =)
Here you go:
https://forum.xda-developers.com/re...mi-note-3-pro-special-edition-mm-rom-t3453470
Say if it was working
Useless Thread Dude
Maximaro said:
Thinker Hour =)
Here you go:
https://forum.xda-developers.com/re...mi-note-3-pro-special-edition-mm-rom-t3453470
Say if it was working
Click to expand...
Click to collapse
As I mentioned all the problem in the thread....there's nothing wrong with bootloader.
Thanks but no thanks
More info required: Official unlock or Unofficial unlock?
After flashing oreo ROM lazy flasher is not required you need to format data ( apart from wiping data ) to boot the device.
when connected to PC when the red light is blinking that means you're in EDL mode, now try holding power + vol down button, keep holding until you get a vibration & get into fastboot mode.
Then you can use fastboot commands to check if the bootloader is still unlocked & can flash TWRP again if erased.
But, if device is unable to enter fastboot mode then you must flash MIUI fastboot ROM through EDL.
The procedure is the same for flashing but you need appropriate drivers en.miui.com/forum.php?mod=attachment&aid=NzU4MzF8ZWU0ZWM1OTR8MTM5ODc1NDUzM3w2NDg1MDkzM3wxOTY5Nw%3D%3D
look like EDL mode
I can buy ur phone if u want to sell it. Reply if u r interested.
Unofficial Unlock
VaibhavKumar07 said:
More info required: Official unlock or Unofficial unlock?
After flashing oreo ROM lazy flasher is not required you need to format data ( apart from wiping data ) to boot the device.
when connected to PC when the red light is blinking that means you're in EDL mode, now try holding power + vol down button, keep holding until you get a vibration & get into fastboot mode.
Then you can use fastboot commands to check if the bootloader is still unlocked & can flash TWRP again if erased.
But, if device is unable to enter fastboot mode then you must flash MIUI fastboot ROM through EDL.
The procedure is the same for flashing but you need appropriate drivers
I have tried holding all the combination keys as mentioned earlier but no results. So without getting in Fastboot mode i cannot flash the rom and I don't think so that my device is in EDL mode because PC device manager shows Qualcomm 900E instead of 9008.
Thanks for replying to the thread and please provide other solution.
Click to expand...
Click to collapse
OK
forever.parv said:
I can buy ur phone if u want to sell it. Reply if u r interested.
Click to expand...
Click to collapse
ok
Hello,
Is there a solution to this problem? I too have the exact issue now.
Thanks
Rahim.
I am ready to buy the phone + also can help you solve the issue.. which one do you want
Test Point Method
bro just go for test point method, it works for me
for that use have open backcover of your phone
Solution please
evansourav said:
I am ready to buy the phone + also can help you solve the issue.. which one do you want
Click to expand...
Click to collapse
It would be great if u provide a solution for this.
Rishabh Sharma_10 said:
It would be great if u provide a solution for this.
Click to expand...
Click to collapse
Can you turn off the device?
Yudhz® said:
look like EDL mode
Click to expand...
Click to collapse
Yeah his phone in EDL mode. I went through this problem. Now everything is working fine.
---------- Post added at 05:19 PM ---------- Previous post was at 05:15 PM ----------
You're already in EDL mode. So start from edl part. Try this... http://en.miui.com/thread-235865-1-1.html
evansourav said:
Can you turn off the device?
Click to expand...
Click to collapse
The device is already dead.
What happens when you plug charger? What about Qualcomm QHSUSB BULK? Is it showing up in EDL? Vibration Works? LCD Backlight Turns On?
santoshbodake said:
bro just go for test point method, it works for me
for that use have open backcover of your phone
Click to expand...
Click to collapse
Once happened to me this method worked for me
same issue here have you got any solution
This happens to me once...but i got it solved. This is really an edl mode of the phone. Keep trying connecting it to pc and try pressing those volume and power buttons if there is any voice connecting to pc means your phone is not dead. So, keep trying.
https://forum.xda-developers.com/redmi-note-3/how-to/unlock-unofficially-install-zcx-twrp-t3586778
Here, this helped me. If you follow the instructions correctly, you will be able to unlock bootloader, boot into twrp and then flash your custom rom. Skip to the part when you will have the red led blinking.
Hope it helps.
Hi all I'm new to this forum. I'm using a Xiaomi Redmi Note 3(SD) for about two years. I had rooted the device by official method and was using Lineage OS 14.1 almost 1.5 years . Yesterday I went through a xda thread which saying miui rom for rooted Redmi Note 3. I flashed that ROM and after that my device is not staring. When I'm powering the device it is vibrating and showing mi logo and then turning off. I'm not able to go to TWRP by volume up and power key as it is shutting down after switch on. But I'm able to go fastboot mode by volume down and power key combo. And also the notification led is blinking red when I'm charging the device. I've tried to flash TWRP recovery via fastboot but it's saying "failed remote device is locked" Tried to flash miui fastboot ROM via Miflash tool but it also failing with same remote device locked statement.
Now my question is that does my device got bricked? Will I be able to bring it back to working state? Anyone please help :crying:
linuxuser02 said:
Hi all I'm new to this forum. I'm using a Xiaomi Redmi Note 3(SD) for about two years. I had rooted the device by official method and was using Lineage OS 14.1 almost 1.5 years . Yesterday I went through a xda thread which saying miui rom for rooted Redmi Note 3. I flashed that ROM and after that my device is not staring. When I'm powering the device it is vibrating and showing mi logo and then turning off. I'm not able to go to TWRP by volume up and power key as it is shutting down after switch on. But I'm able to go fastboot mode by volume down and power key combo. And also the notification led is blinking red when I'm charging the device. I've tried to flash TWRP recovery via fastboot but it's saying "failed remote device is locked" Tried to flash miui fastboot ROM via Miflash tool but it also failing with same remote device locked statement.
Now my question is that does my device got bricked? Will I be able to bring it back to working state? Anyone please help :crying:
Click to expand...
Click to collapse
Your device's bootloader got locked as a result of flashing MIUI. Just unlock it again using official Mi Unlock tool and flash TWRP.
jayaram95 said:
Your device's bootloader got locked as a result of flashing MIUI. Just unlock it again using official Mi Unlock tool and flash TWRP.
Click to expand...
Click to collapse
Thanks for replying. But when I'm trying to flashing using MIflash tool it's saying remote device locked. And MI tool is also not recognising the device as USB debugging is not turned on. What to do next?
linuxuser02 said:
Thanks for replying. But when I'm trying to flashing using MIflash tool it's saying remote device locked. And MI tool is also not recognising the device as USB debugging is not turned on. What to do next?
Click to expand...
Click to collapse
Miflash won't work with fastboot mode if your device's bootloader is locked. You'll have to go to EDL mode and then flash using Miflash.
jayaram95 said:
Miflash won't work with fastboot mode if your device's bootloader is locked. You'll have to go to EDL mode and then flash using Miflash.
Click to expand...
Click to collapse
Thanks man. It worked like charm. But still I can't understand how this device got locked even after flashing a pre-rooted ROM with lazy flasher. Anyway thank you again :good:
linuxuser02 said:
Thanks man. It worked like charm. But still I can't understand how this device got locked even after flashing a pre-rooted ROM with lazy flasher. Anyway thank you again :good:
Click to expand...
Click to collapse
Sometimes the emmc.appsboot file in MIUI ROMs messes up this way. I always remove that file from the ROM zip before flashing just to be on the safer side, while flashing MIUI ROMs through TWRP. And, always make sure USB debugging is turned ON, as it helps during such situations.
any solution to this? mine shut off after showing mi.com logo.. flashing in edl mode with official rom still the same.. please help
Oreol said:
any solution to this? mine shut off after showing mi.com logo.. flashing in edl mode with official rom still the same.. please help
Click to expand...
Click to collapse
i have same problem , did you fix i?
linuxuser02 said:
Thanks man. It worked like charm. But still I can't understand how this device got locked even after flashing a pre-rooted ROM with lazy flasher. Anyway thank you again :good:
Click to expand...
Click to collapse
What is EDL mode. how to flash using edl mode ?
jayaram95 said:
Miflash won't work with fastboot mode if your device's bootloader is locked. You'll have to go to EDL mode and then flash using Miflash.
Click to expand...
Click to collapse
What is EDL mode ?
how to flash using edl mode ?
After updating my redmi note 5 it works normal for one day and after that i restart my phone and it turns to bootloop .It start shows mi logo and then again starts .The whole continuous till battery is dead
My phone bootloader is locked so try to install twrp via unofficial method that is replacing original recovery.img to twrp(renaming it to recovery.img).But nothing happens after flashing when i go to recovery mode the whole screen truns balck and phone connected to pc via 900E port.
I am trying to recover it but nothing happens
This problem happens in past but i recover it because in that time twrp is install and the only thing is to mount some partition(not in memory which partition).
but this time no twrp plz help plz....
thanks in advance.
If you can get into Fastboot download fastboot Rom for your model and install with MiFlash.
Sent from my Nokia 7 plus using Tapatalk
Stransky said:
If you can get into Fastboot download fastboot Rom for your model and install with MiFlash.
Sent from my Nokia 7 plus using Tapatalk
Click to expand...
Click to collapse
I get in fastboot mode but my phone bootloader is locked . I have flash my phone via test point method to its base ver rom but problem exist till now:crying:.
Anyone plz give the way to install twrp on this bricked phone and after that i can handel it.
Hi everyone,
I have Xiaomi Redmi Note 4, and when I using him, hes gone. Nothing work, no fastboot, no twrp, only Red led when i charge battery.
And i want to flash miui global in MiFlash and... I have error PING TARGET VIA FIREHOSE.
Guys please help me, I tried in 6 miui globals, china, any MiFlash version(Beta,2014,2015,2016) and dont work
Have a nice day.
P.S I have Qualcomm HS-USB QDLoader 9008 (COM3)
Try to flash in edl mode... For this you have an authorized mi account
I got same issue some time before just remove the battery connector after that connect the phone with pc (WITHOUT BATTERY CONNECT) flash again using miflash tool
ismail.ahmed84 said:
I got same issue some time before just remove the battery connector after that connect the phone with pc (WITHOUT BATTERY CONNECT) flash again using miflash tool
Click to expand...
Click to collapse
I tried IT and dont work
anil5462 said:
Try to flash in edl mode... For this you have an authorized mi account
Click to expand...
Click to collapse
I flashed on edl and dont work
i experienced same issue before and nobody in XDA cant fix this (or wont bother to reply,, idk)
try test point method. if it doesn't work, i'm afraid that you have broken hardware. you have to replace it
anil5462 said:
Try to flash in edl mode... For this you have an authorized mi account
Click to expand...
Click to collapse
rs168 said:
i experienced same issue before and nobody in XDA cant fix this (or wont bother to reply,, idk)
try test point method. if it doesn't work, i'm afraid that you have broken hardware. you have to replace it
Click to expand...
Click to collapse
I tried testpoint and always have error writing on Device in miflash
Snajper322 said:
I tried testpoint and always have error writing on Device in miflash
Click to expand...
Click to collapse
okay .. too bad you should replace your device, or you can find a good mechanic to replace some broken parts. it usually works
did you drop it?
or it happened during installing rom or something?
How does it happened please tell us.
Charge it overnight
Hold the power button 20-30 seconds the next day
Boot the device in fast boot mode by holding volume down+power button. Then go to MiFlash and flash fastboot redmi note 4 rom in edl mode(Unlock bootloader by running the last script file and then proceed to do the following steps). Download stock fastboot rom for redmi note 4 from official mi website(Note: The stock fastboot rom is different from stock recovery rom). While flashing the rom, below you have the option to choose three modes, click clean all and lock. Flash this rom and you're device will be working in no time. Make sure your device has adequate battery