Hi guys.
im trying to flash G530H with odin and i have this error mesage:
<ID:0/008> Odin engine v(ID:3.1100)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Set PIT file..
<ID:0/008> DO NOT TURN OFF TARGET!!
<ID:0/008> FAIL!
<ID:0/008>
<ID:0/008> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
what can i do? i tried with an pit file, but its not works
Please check that repartition is not ticked in odin
Related
iam tryin to load my stock rom bt i am not able to update it... i tried to root my phone .. when i tried to load the insecure kernal the yellow exclamation came up nd den it neva booted .. now i am tryin to load the stock rom bt it failed .. can any1 help me
<ID:0/008> Added!!
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> boot.bin
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
rom : xwkf3
India
I think its because you did something with the PIT or the re-partiton section in Odin. Check if these areas are untouched. The box next to PIT should be left blank, and the re-partition checkbox should be left unchecked.
Of course, I may be wrong, I'm a newbie myself. :/
crobat said:
I think its because you did something with the PIT or the re-partiton section in Odin. Check if these areas are untouched. The box next to PIT should be left blank, and the re-partition checkbox should be left unchecked.
Of course, I may be wrong, I'm a newbie myself. :/
Click to expand...
Click to collapse
the pit and the repartition was untouched
Its common to see this if u tried to shift between a CM7 based ROM and the stock ROM. U will need to put your phone in download, add pit and other files, tick re-partition and flash the stock ROM. Then u will be able to boot normally.
I think there is a problem with the rom, maybe download problem, or it's not suitable for your mobile.
Questions or Problems Should Not Be Posted in the Development Forum
Please Post in the Correct Forums and Read THIS
Moving to Q&A
Same issue with me, have you got any solution to this? I have tried all resorts but getting stuck at below -
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> boot.bin
<ID:0/008> NAND Write Start!!
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
i din get any solution
please close this thread
hey,
iam tryin to load my stock rom bt i am not able to update it... i tried to root my phone .. when i tried to load the insecure kernal the yellow exclamation came up nd den it neva booted .. now i am tryin to load the stock rom bt it failed .. can any1 help me
<ID:0/008> Added!!
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> boot.bin
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
rom : xwkf3
India
neerajganga said:
hey,
iam tryin to load my stock rom bt i am not able to update it... i tried to root my phone .. when i tried to load the insecure kernal the yellow exclamation came up nd den it neva booted .. now i am tryin to load the stock rom bt it failed .. can any1 help me
<ID:0/008> Added!!
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> boot.bin
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
rom : xwkf3
India
Click to expand...
Click to collapse
Ok, please try the following (if not tried already):
1. Use another USB connection.
2. Use another USB cable.
3. Restart Odin.
4. Restart your computer.
5. Re-install drivers for your phone - e.g. using KIES.
6. Re-download the ROM or just use another (stock) ROM for your phone and region.
Good luck !
Please close this thread
Hi,
I am trying to install a custom ROM on my phone. I have the i9300 version and I am following this guide:
http://forum.xda-developers.com/gal...covery-clockworkmod-touch-6-0-3-2-gt-t1719744
I am using the version attached, even though it looks a little old. I have done nothing to the phone before this so it is a stock OS.
I have booted in to download mode and flashed using odin, Odin says everything went ok and does a restart:
<ID:0/008> Added!!
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> recovery.img
<ID:0/008> NAND Write Start!!
<ID:0/008> RQT_CLOSE !!
<ID:0/008> RES OK !!
<ID:0/008> Completed..
<ID:0/008> Added!!
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/008> Removed!!
<ID:0/009> Added!!
After this I try to boot in to recovery mode and it is not the version I see on the video and there is no touch. The Rom I choose will then not install correctly. I guess that its not the clockwork mod, any idea on what I am doing wrong?
Thanks
-Howard
In the end of the guide there is:
"Stock Recovery being reflashed after a reboot?..."
May be You have stock recovery after reboot?
And have You tried Samsung toolkit? http://forum.xda-developers.com/galaxy-s3/orig-development/samsung-galaxy-s3-unified-toolkit-v8-0-t1703488
Hi,
Just tried that, same issue. It's like it can't get root. No errors thrown and odin seems happy and reports it's "passed"
guys please help ??? when i try to flash stock rom on my device (samsung GT-S7582) odin stuck at Initialzation and i get this message :
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
i tried to set pit file but still get the same error !! what should i do
Hi friends
My phone dropped from hand and got black screen now Iam trying to flash samsung s5 using odin.. and getting error message.
<ID:0/008> Removed!!
<ID:0/008> Added!!
<ID:0/008> Odin engine v(ID:3.1205)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> SingleDownload.
<ID:0/008> aboot.mbn
<ID:0/008> sbl1.mbn
<ID:0/008> rpm.mbn
<ID:0/008> FAIL! (Auth)
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
thanks
ufoall said:
Hi friends
My phone dropped from hand and got black screen now Iam trying to flash samsung s5 using odin.. and getting error message.
<ID:0/008> Removed!!
<ID:0/008> Added!!
<ID:0/008> Odin engine v(ID:3.1205)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> SingleDownload.
<ID:0/008> aboot.mbn
<ID:0/008> sbl1.mbn
<ID:0/008> rpm.mbn
<ID:0/008> FAIL! (Auth)
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
thanks
Click to expand...
Click to collapse
What's your intention? Do you have a custom rom and want to flash stock rom to get the device to repair center?