Related
Hey everyone,
This is my first time posting to the forums. I have been trying to get everything done without having to ask questions since there are so many all over the place and I can see how it can get tiring trying to help everyone when their may be an answer out there already if you look. However, I have ran into an issue that I can't seem to find much information on. I have the HTC Rezound that is S-On (apparently you need a Linux machine to get S-Off which I don't have. Using Windows 7.) and have been using fastboot to get things done. I have unlocked the bootloader and have installed the 'Amon Ra' recovery and setup Superuser and SU. As far as I know, I have to use ROM's that are S-On friendly (right?) and I chose to try out 'EclipticRez' and later 'Talon'.
As I tried to flash the ROM's through fastboot it fails with the following errors every time and I cannot continue:
archive does not contain android-info.txt
archive does not contain android-product.txt
From what I found is that it may be a bad download of the ROM. Maybe.... But it happened consecutively with two different ROM downloads.
I also read that maybe the recovery wasn't setup, which as far as I know it is. Should I use a different recovery? Everyone usually references to using CWM, which I wouldn't mind using but I couldn't figure out how to get SU access.
Can I just create the files myself? They are only txt files after all.
If anyone can help me with this I will be so grateful! I'm pretty new to this and it has definitely been a fun learning experience for me
Much thanks in advance!
Strikerz87 said:
Hey everyone,
This is my first time posting to the forums. I have been trying to get everything done without having to ask questions since there are so many all over the place and I can see how it can get tiring trying to help everyone when their may be an answer out there already if you look. However, I have ran into an issue that I can't seem to find much information on. I have the HTC Rezound that is S-On (apparently you need a Linux machine to get S-Off which I don't have. Using Windows 7.) and have been using fastboot to get things done. I have unlocked the bootloader and have installed the 'Amon Ra' recovery and setup Superuser and SU. As far as I know, I have to use ROM's that are S-On friendly (right?) and I chose to try out 'EclipticRez' and later 'Talon'.
As I tried to flash the ROM's through fastboot it fails with the following errors every time and I cannot continue:
archive does not contain android-info.txt
archive does not contain android-product.txt
From what I found is that it may be a bad download of the ROM. Maybe.... But it happened consecutively with two different ROM downloads.
I also read that maybe the recovery wasn't setup, which as far as I know it is. Should I use a different recovery? Everyone usually references to using CWM, which I wouldn't mind using but I couldn't figure out how to get SU access.
Can I just create the files myself? They are only txt files after all.
If anyone can help me with this I will be so grateful! I'm pretty new to this and it has definitely been a fun learning experience for me
Much thanks in advance!
Click to expand...
Click to collapse
1) Switch to TWRP or CWM for your recovery.
2) You install the rom zip via recovery.
3) You then need to fastboot flash the kernel from the rom zip you downloaded. You don't install the whole rom via fastboot.
To borrow from the CM11 thread.
- Place the boot.img into the platform-tools folder of the Android SDK's install directory.
- Boot to the bootloader.
- Ensure your device is connected to your computer and that your device is now in fastboot mode. This is a white screen and it says fastboot on it.
- Open a Terminal (OSX or Linux) or CMD window (Windows) and cd to the platform-tools directory of the Android SDK's install directory.
- Issue this command to flash the boot.img we placed in the platform-tools folder earlier:
Code:
fastboot flash boot boot.img
- Watch the output of the terminal, it should say something like "sent successfully".
- Finally send this command:
Code:
fastboot reboot
Since you're s-on, you'll need to do this whenever you install a new rom. Using these steps, you can install any rom you want.
Strikerz87 said:
Hey everyone,
This is my first time posting to the forums. I have been trying to get everything done without having to ask questions since there are so many all over the place and I can see how it can get tiring trying to help everyone when their may be an answer out there already if you look. However, I have ran into an issue that I can't seem to find much information on. I have the HTC Rezound that is S-On (apparently you need a Linux machine to get S-Off which I don't have. Using Windows 7.) and have been using fastboot to get things done. I have unlocked the bootloader and have installed the 'Amon Ra' recovery and setup Superuser and SU. As far as I know, I have to use ROM's that are S-On friendly (right?) and I chose to try out 'EclipticRez' and later 'Talon'.
As I tried to flash the ROM's through fastboot it fails with the following errors every time and I cannot continue:
archive does not contain android-info.txt
archive does not contain android-product.txt
From what I found is that it may be a bad download of the ROM. Maybe.... But it happened consecutively with two different ROM downloads.
I also read that maybe the recovery wasn't setup, which as far as I know it is. Should I use a different recovery? Everyone usually references to using CWM, which I wouldn't mind using but I couldn't figure out how to get SU access.
Can I just create the files myself? They are only txt files after all.
If anyone can help me with this I will be so grateful! I'm pretty new to this and it has definitely been a fun learning experience for me
Much thanks in advance!
Click to expand...
Click to collapse
also to note....you dont have to install linux to get s-off....if you follow my guide you can do it straight from a live disk rather than installing it....so it wont erase or mess up your windows partition at all
Solved!
Thank you, Mjones, I finally got it! I knew it was much easier than I was making it out to be. I was missing the kernel! Yeah, a crucial part in the process, I know
I first ran CWM and flashed the ROM over and ran the .zip through recovery (which I couldn't understand at first as I could never find it in the directory) but the installer would only go 50% and would fail... makes sense why now lol
I later flashed TWRP and backed up again after recovering from the fail. I flashed over the kernel and voila! So simple... Had to slap myself.
Thanks again! Case solved.
REV3NT3CH, that is sweet!! I have been hoping there is a way to gain s-off with Windows. I have 7 at work and 8.1 (which I can't get anything to work on) at home. I actually have to focus on work today haha so I'll look into the method and try it out tomorrow if I can. Thanks for all of the help.
mjones73 said:
1) Switch to TWRP or CWM for your recovery.
2) You install the rom zip via recovery.
3) You then need to fastboot flash the kernel from the rom zip you downloaded. You don't install the whole rom via fastboot.
To borrow from the CM11 thread.
- Place the boot.img into the platform-tools folder of the Android SDK's install directory.
- Boot to the bootloader.
- Ensure your device is connected to your computer and that your device is now in fastboot mode. This is a white screen and it says fastboot on it.
- Open a Terminal (OSX or Linux) or CMD window (Windows) and cd to the platform-tools directory of the Android SDK's install directory.
- Issue this command to flash the boot.img we placed in the platform-tools folder earlier:
Code:
fastboot flash boot boot.img
- Watch the output of the terminal, it should say something like "sent successfully".
- Finally send this command:
Code:
fastboot reboot
Since you're s-on, you'll need to do this whenever you install a new rom. Using these steps, you can install any rom you want.
Click to expand...
Click to collapse
Thank You So much, Mine case also Resolved. I was too frustated sice last 3 days cause my phone was in dead mode. At the end, fastboot flash boot boot.img Worked. ThankYOu
mjones73 said:
1) Switch to TWRP or CWM for your recovery.
2) You install the rom zip via recovery.
3) You then need to fastboot flash the kernel from the rom zip you downloaded. You don't install the whole rom via fastboot.
To borrow from the CM11 thread.
- Place the boot.img into the platform-tools folder of the Android SDK's install directory.
- Boot to the bootloader.
- Ensure your device is connected to your computer and that your device is now in fastboot mode. This is a white screen and it says fastboot on it.
- Open a Terminal (OSX or Linux) or CMD window (Windows) and cd to the platform-tools directory of the Android SDK's install directory.
- Issue this command to flash the boot.img we placed in the platform-tools folder earlier:
Code:
fastboot flash boot boot.img
- Watch the output of the terminal, it should say something like "sent successfully".
- Finally send this command:
Code:
fastboot reboot
Since you're s-on, you'll need to do this whenever you install a new rom. Using these steps, you can install any rom you want.
Click to expand...
Click to collapse
I need to be able to do it via fastboot, as my Motorola Electrify M is stuck in a bootloop and there's no way I could find to boot into recovery. I'm using ./fastboot update name_of_update.zip and it is an official OTA .zip but I still get this error. Any suggestions?
ecols33 said:
I need to be able to do it via fastboot, as my Motorola Electrify M is stuck in a bootloop and there's no way I could find to boot into recovery. I'm using ./fastboot update name_of_update.zip and it is an official OTA .zip but I still get this error. Any suggestions?
Click to expand...
Click to collapse
Sorry, don't know anything about that phone.
ecols33 said:
I need to be able to do it via fastboot, as my Motorola Electrify M is stuck in a bootloop and there's no way I could find to boot into recovery. I'm using ./fastboot update name_of_update.zip and it is an official OTA .zip but I still get this error. Any suggestions?
Click to expand...
Click to collapse
Did you try this first? (Right from Moto's site)
Perform a factory reset using external keys
1. Power off the phone, press and hold volume down button, press power button
2. Screen will come up with "Fastboot", press Vol down key to cycle through choices until you get "Android Recovery", then press Vol up key
3. Wait for the "triangle ! / Android" screen then go on to step 4
4. Press both Vol up and Vol down key simultaneously. A menu will come up
5. Tap on Vol down key until "wipe data/factory reset" is highlighted, and tap Power key. Another Confirmation screen will come. Tap on Vol down key until coming to Yes and tap Power key
6. After userdata is cleared, the "reboot system now" option will be highlighted by Default. Tap Power key
7. Phone will reboot to initial setup screen.
PLEASE HELP! I have a Huawei P8 and I tried to update to android 6.0 (GRA-L09xxxxxxxxxxxB317 or something) Went to install it and now im stuck in bootloop (a very annoying one, I can rarely get into eRecovery and eRecovery is not able to fix my problem: "Getting package info failed") so I went into fastboot&rescue mode and I did the flash thing via my PC (that Fastboot flash boot boot.img etc.) but I get this error saying: "FAILED (remote: Command not allowed)" for any image im trying to flash. My fastboot/bootloader or whatever it's called is locked my android is unrooted and stock android. I don't know how to unlock it I can't find anything anywhere.. HELP ME
not working
hariom.gupta11 said:
Thank You So much, Mine case also Resolved. I was too frustated sice last 3 days cause my phone was in dead mode. At the end, fastboot flash boot boot.img Worked. ThankYOu
Click to expand...
Click to collapse
not working on my 4c. write successful but when reboot is completed it goes to previous state.
"the user data partition can no longer be used"
zb602kl_x00tdb
L0RDZ3RO said:
PLEASE HELP! I have a Huawei P8 and I tried to update to android 6.0 (GRA-L09xxxxxxxxxxxB317 or something) Went to install it and now im stuck in bootloop (a very annoying one, I can rarely get into eRecovery and eRecovery is not able to fix my problem: "Getting package info failed") so I went into fastboot&rescue mode and I did the flash thing via my PC (that Fastboot flash boot boot.img etc.) but I get this error saying: "FAILED (remote: Command not allowed)" for any image im trying to flash. My fastboot/bootloader or whatever it's called is locked my android is unrooted and stock android. I don't know how to unlock it I can't find anything anywhere.. HELP ME
Click to expand...
Click to collapse
I have same problem on asus zenfone max pro m1 I bought it online said used and now working
can't boot into recovery.
can't boot into system.
Only EDL Mode and Fastboot Mode, but fastboot is Locked whic I cant unlock because I cannot boot into system to toggle USB Debugging and allow OEM unlocking
Qualcomm is harder to flash than MTK that can use SP FlashTool.
on this I use QFIL but keeps "sahara error". I tried searching and try moving firmware file to bin but no Luck. I'm currently trying different version of QFIL Tool.
If it FAILS my only HOPE is to use MUT-QCfire which will Require a "SmartCardReader" Which is a bit pricey and I don't even know if it will work on my device.
So I have been installing this rom http://forum.xda-developers.com/showthread.php?t=2188931 .
I installed just the rom and not the update and now my phone will not boot it turns onto the htc first screen and vibrates a few times.
I have tried going into recovery mode and starting again but recovery does not now boot the phone restarts and the above happens.
I have installed fast boot on my computer but when I run it, it flashes up for a second then closes.
Thanks in advance for your help.
sodamhall said:
So I have been installing this rom http://forum.xda-developers.com/showthread.php?t=2188931 .
I installed just the rom and not the update and now my phone will not boot it turns onto the htc first screen and vibrates a few times.
I have tried going into recovery mode and starting again but recovery does not now boot the phone restarts and the above happens.
I have installed fast boot on my computer but when I run it, it flashes up for a second then closes.
Thanks in advance for your help.
Click to expand...
Click to collapse
Well, without knowing any details about your phone and what update you were on, which recovery you used, whether or not you are S-On / S-Off, then we're just shooting in the dark trying to help.
If fastboot flashes for a sec and closes, then you are not using fastboot right. You have to run it from the Command Prompt. You don't double click on the fastboot.exe .
Can you still get to the bootloader mode?
And I have to ask, but you're sure you got the right rom from the right forum as there are quite a few different variants of the Desire...?
es0tericcha0s said:
Well, without knowing any details about your phone and what update you were on, which recovery you used, whether or not you are S-On / S-Off, then we're just shooting in the dark trying to help.
If fastboot flashes for a sec and closes, then you are not using fastboot right. You have to run it from the Command Prompt. You don't double click on the fastboot.exe .
Can you still get to the bootloader mode?
And I have to ask, but you're sure you got the right rom from the right forum as there are quite a few different variants of the Desire...?
Click to expand...
Click to collapse
How do I open fastboot from a command prompt I just need to know what to type.
I can still get into bootloader fine on the phone and my pc knows its contected via usb.
I know the phone was running a different recovery mode than standard but I don't know witch one. I think it may have been xloader or something with a x.
Its a standard desire. Regards Wayne
I have manged to load bootloader with command prompt and I want to remove the rom I have installed how do I go about this? Regards again, Wayne
O.K so I have loaded up bootloader and thought -w would be the command I am looking for, all I get from bootload on my computer is: waiting for device. I have attached a screen shot. Regards Wayne
You'll have to find an appropriate recovery.img and use fastboot to install. Make sure the img file is in the fastboot directory and while connected in bootloader/fastboot mode:
fastboot flash recovery recovery.img (where recovery.img is the name of your file - it can be whatever.img and you can rename it to whatever you want as long as you don't change the extension .img)
and see if you can boot to recovery at that point. If not, then you will probably have to use an RUU to return to stock and start over.
If you can get into the custom recovery, then you can reinstall another rom. Keep in mind, if S-On, then you will probably need to use fastboot to install the boot.img like so:
fastboot flash boot boot.img (here boot.img should remain named that)
OK, so I was rolling along just fine...
Got Fastboot up and running, got myself an unlocked bootloader, got myself the latest TWRP image, and no matter WHAT I DO, I can not get TWRP to flash to my device, and it is driving me absolutely INSANE. Below is what i am getting from command prompt. Any help is GREATLY appreciated.
Code:
C:\Users\saltam\Downloads\TWRP>fastboot flash recovery recovery.img
sending 'recovery' (13186 KB)...
FAILED (command write failed (Invalid argument))
finished. total time: 0.000s
I am pulling what little hair I have out over here, and I am no beginner when it comes to this stuff. Please help if you can.
Only a couple of things I can think, which I'm sure you've already done. Have you re-downloaded the image file and you have renamed it recovery.img?
Edit, is your bootloader unlocked?
Sent from my Nexus 5 using XDA Free mobile app
Boot loader is unlocked, tried everything besides a different computer. Tried different cord, different USB port, everything. It's like once I unlocked the boot loader the tablet stopped communicating with fast boot. Anything I try to do hangs until I hit reboot fast boot then it fails. Irritating the hell out of me...
have you tired using the wugs Nexus root toolkit? http://forum.xda-developers.com/nexus-9/development/toolkit-wugs-nexus-root-toolkit-v1-9-8-t2945451
I was having some trouble TWRP installing as well., and it was able to install TWRP just fine
Close any other running programs, especially Chrome. Then if still not doing it, install CWM Recovery instead, and if you still want TWRP flash it from CWM Recovery.
My N5 won't let me have TWRP, so if you just want the functions of a recovery, try a different one.
blakeslee14 said:
have you tired using the wugs Nexus root toolkit? http://forum.xda-developers.com/nexus-9/development/toolkit-wugs-nexus-root-toolkit-v1-9-8-t2945451
I was having some trouble TWRP installing as well., and it was able to install TWRP just fine
Click to expand...
Click to collapse
Tried Wug's, and got the same result when I got to it sending the fast boot commands. Prompt just hangs until I select reboot fast boot.
craig.buckie said:
Close any other running programs, especially Chrome. Then if still not doing it, install CWM Recovery instead, and if you still want TWRP flash it from CWM Recovery.
My N5 won't let me have TWRP, so if you just want the functions of a recovery, try a different one.
Click to expand...
Click to collapse
I'm at my end right now, because I want to remove all this dumb Google bloatware so badly. Was thinking about trying to flash stock image, or relock and unlock boot loader again to see if that does anything, but I'm very nervous that those options might not work because of the fact that fast boot commands aren't working. Certainly don't want to end up with a $400 paperweight...
SwoRNLeaDejZ said:
Tried Wug's, and got the same result when I got to it sending the fast boot commands. Prompt just hangs until I select reboot fast boot.
I'm at my end right now, because I want to remove all this dumb Google bloatware so badly. Was thinking about trying to flash stock image, or relock and unlock boot loader again to see if that does anything, but I'm very nervous that those options might not work because of the fact that fast boot commands aren't working. Certainly don't want to end up with a $400 paperweight...
Click to expand...
Click to collapse
I assume you're on 5.0.1. Flash the boot or recovery image from the factory image in fastboot. See if that works. That might rule out a fastboot issue. If it flashed it won't do anything negative to your device
Sent from my Nexus 9 using XDA Free mobile app
jd1639 said:
I assume you're on 5.0.1. Flash the boot or recovery image from the factory image in fastboot. See if that works. That might rule out a fastboot issue. If it flashed it won't do anything negative to your device
Sent from my Nexus 9 using XDA Free mobile app
Click to expand...
Click to collapse
Going to give this a shot now..
Worth mentioning, I ran an OEM Lock command, and successfully relocked the bootloader, so it appears fastboot is at least partially working. Going to attempt to flash the bootloader in the image from Google, because that is all there is. Just bootloader and image, no recovery image. I will post results here. I don't know why fastboot commands are broken after unlocking bootloader, but there is one thing that seems odd to me:
When I run fastboot devices, it returns the following (has been like this from the beginning):
Code:
C:\Users\saltam\Downloads\TWRP>fastboot devices
???????????? fastboot
Thoughts?
Something's not right. Do you have the newest fastboot?
di11igaf said:
Something's not right. Do you have the newest fastboot?
Click to expand...
Click to collapse
Yes, recently updated it via the minimalist fastboot/adb tool. This is REALLY irritating the hell out of me at this point... Been trying to get recovery on this stupid tablet all damn day...
I am starting to think this is a read/write error.. It is getting the error whenever it tries to write to the tablet... (sending boot.img results in the error every time)... Anyone know of fastboot/adb commands to check/fix read and write errors
**EDIT**
So, much to my chagrin, it appears to just be my computer... Tried on a different laptop, and was able to get it rooted.. For some odd reason though, I don't think TWRP is installing correctly ??
I am going to try and boot into recovery, but every time i try to flash it with fastboot flash recovery recovery.img it says it was successful, but a boot into recovery mode comes up as the dreaded NO COMMAND laying down Android icon. Super frustrating..
**EDIT 2**
So after much trying of different methods, I was able to successfully flash TWRP with Flashify. Not sure why I couldn't do it manually through fastboot but I'm good now. Thanks for all the replies and suggestions. This can be marked as closed or solved. Thanks!
SwoRNLeaDejZ said:
I am starting to think this is a read/write error.. It is getting the error whenever it tries to write to the tablet... (sending boot.img results in the error every time)... Anyone know of fastboot/adb commands to check/fix read and write errors
**EDIT**
So, much to my chagrin, it appears to just be my computer... Tried on a different laptop, and was able to get it rooted.. For some odd reason though, I don't think TWRP is installing correctly ??
I am going to try and boot into recovery, but every time i try to flash it with fastboot flash recovery recovery.img it says it was successful, but a boot into recovery mode comes up as the dreaded NO COMMAND laying down Android icon. Super frustrating..
**EDIT 2**
So after much trying of different methods, I was able to successfully flash TWRP with Flashify. Not sure why I couldn't do it manually through fastboot but I'm good now. Thanks for all the replies and suggestions. This can be marked as closed or solved. Thanks!
Click to expand...
Click to collapse
To your first edit, twrp is probably working correctly. Lollipop forces the stock recovery. There are two files, one in /system and one in /system/bin that force the stock recovery upon boot. You can remove those files or first
fastboot boot twrp.img
Then flash supersu in twrp, then
fastboot flash recovery twrp.img
Sent from my Nexus 9 using XDA Free mobile app
Got the right USB driver
Dirty Unicorns /Uber / Beanstalk Yuga adm.
xtcdk said:
Got the right USB driver
Dirty Unicorns /Uber / Beanstalk Yuga adm.
Click to expand...
Click to collapse
Kind of mystified with your response... Had nothing to do with the USB drivers. Found out afterward that the problem was the security that my company had setup on my laptop (was using my company thinkpad). Switching laptops solved the problem.
**XT2041-4**
hey folks,
i have the gpower/g8power (XT2041-4) and i was able to unlock the bootloader and i have been able to do the fastboot commands but it fails when i do the fastboot system, product, vbmeta commands for the crdroid, lineage and havok. i got into twrp and tried installing the zips for those roms but those failed too.
i got to the android OS start screen but the touchscreen is unresponsive. i have looked through a lot of the threads for this device and can't find anything that works.
any help will be much appreciated because this is my daily driver.
edit: title should be XT2041-4
your best option would be to connect an otg cable, ( best is to make sure you can have a double connection, one for mouse , on connected to the pc) then get into the phone with the non-touchscreen booted rom, connect it to LMSA , and extract the boot.img image that comes with the rom LMSA downloads. you should have a working touchscreen with the version LMSA downloads .
Reason you need a double connection: you need to accept the connection to your pc from the phone
you could also browse to the settings --> about this phone and take a look at the exact ROM that is installed, and find that image on lollinet , then extract and boot the boot.img from that rom.
Hey, I'm having the same problem but I found a workaround.
you can either go in fastboot mode and enter
fastboot set_active b
or go in TWRP and change the active slot to B then proceed to boot up the phone.
In my case, it showed warning saying "cannot boot into system......file maybe corrupted" etc etc, just choose "factory reset" on that screen and your phone should boot into slot B with stock ROM.
That way you can have a functional phone while waiting for the developers to figure out the kernel problem
Cheers
hey thanks guys for taking the time to respond much appreciated.
somehow, no idea, i magically got the phone back to stock and the touchscreen is working. the bootloader is still unlocked so i am not messing with it. that scared the crap out of me lol
Chosimise said:
waiting for the developers to figure out the kernel problem
Cheers
Click to expand...
Click to collapse
this bugged me out. so are you saying if i did everything right, those ROMs i downloaded still wouldn't technically work? even if i do the slot B thing?
uglyaf said:
hey thanks guys for taking the time to respond much appreciated.
somehow, no idea, i magically got the phone back to stock and the touchscreen is working. the bootloader is still unlocked so i am not messing with it. that scared the crap out of me lol
this bugged me out. so are you saying if i did everything right, those ROMs i downloaded still wouldn't technically work? even if i do the slot B thing?
Click to expand...
Click to collapse
I had a completely different issue with the exact same model. I made a post here asking if anyone had an easy fix, but my guess is that these are just growing pains. Give it a couple months and the roms will likely be much more stable. One of the reasons I bought this phone in the first place is because it usually gets official Lineage OS support at some point. With time, I'm sure things will work great. If you use Windows, going back to stock everything is pretty dead simple with the Lenovo Rescue and Recovery tool, so you can kind of experiment safely if you back everything up.
uglyaf said:
hey thanks guys for taking the time to respond much appreciated.
somehow, no idea, i magically got the phone back to stock and the touchscreen is working. the bootloader is still unlocked so i am not messing with it. that scared the crap out of me lol
this bugged me out. so are you saying if i did everything right, those ROMs i downloaded still wouldn't technically work? even if i do the slot B thing?
Click to expand...
Click to collapse
After some tinkering, I actually figured out my problem. There's a big difference between "fastboot mode" (the one you enter by pressing power and vol-) and "Fastbootd" mode.
I did all my flashing in "fastboot mode" and I got no touch screen afterward.
Then there's another hiccup for me (which is why I didn't go in "fastbootd" mode in the first place): When I type in the command in regular "fastboot mode"
Code:
fastboot reboot fastboot
I got an error message saying "reboot fastboot" is not a valid destination or something down those lines.
The problem being, they only added that option in fastboot version r30, so I had to update my ADB and fastboot environment.
And I ran into yet another problem, no matter what I do, the fastboot command is still run with the older version. I guess I messed up the previous installation and the pathing got messy. I ended up using my work laptop for a clean installation of all drivers and it finally solved my problem. I guess I'm saying you need to clean up previous adb and fastboot drivers before using the new ones, especailly if you installed it systemwise.
Anyways, after I booted into "fastbootd" mode and flashed everything with the latest version of fastboot driver, the phone worked flawlessly.
Hope it helps!
hey thanks again for the responses people!
i have managed to get root on stock but still cant get cutsom roms installed at all. they always fail with these 2 methods
a) twrp
unmounting system....invalid zip file format! error installing zip file '/external_sd/....zip' updating partition details....done'
b)using command line
writing 'system'...
(bootloader) Preflash validation failed
FAILED (remote failure)
i type fastboot devices and it finds my phone. it lists it there but i type fastboot reboot fastboot and it just spams a huge list of commands and nothing changes on the phone. ive seen videos and fastbootd looks just like the old school recovery from droid1 days but idk if thats the same skin look on all devices. i was able to switch the slot from a to b in twrp but that didnt help. i cant figure out how to get into fastboot'D' mode.
im really trying here and im sorry im dumb. as always, any suggestions would be much appreciated. thanks again!
uglyaf said:
hey thanks again for the responses people!
i have managed to get root on stock but still cant get cutsom roms installed at all. they always fail with these 2 methods
a) twrp
unmounting system....invalid zip file format! error installing zip file '/external_sd/....zip' updating partition details....done'
b)using command line
writing 'system'...
(bootloader) Preflash validation failed
FAILED (remote failure)
i type fastboot devices and it finds my phone. it lists it there but i type fastboot reboot fastboot and it just spams a huge list of commands and nothing changes on the phone. ive seen videos and fastbootd looks just like the old school recovery from droid1 days but idk if thats the same skin look on all devices. i was able to switch the slot from a to b in twrp but that didnt help. i cant figure out how to get into fastboot'D' mode.
im really trying here and im sorry im dumb. as always, any suggestions would be much appreciated. thanks again!
Click to expand...
Click to collapse
You have no stock recovery, so no fastbootd.
Reflash stock recovery to get fastbootd back
Beetle84 said:
You have no stock recovery, so no fastbootd.
Reflash stock recovery to get fastbootd back
Click to expand...
Click to collapse
thank you,
i downloaded "XT2041-4_SOFIA_RETUS_10_QPMS30.80-51-5_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip"
is must be the wrong one?
i used the recovery.img from that and did fastboot devices and it showed up so i did "fastboot flash recovery recovery.img" and it had no errors, it worked just fine so i tried fastboot reboot fastboot but i still got that long list of commands (((
i dont get it, what am i doing wrong?
uglyaf said:
thank you,
i downloaded "XT2041-4_SOFIA_RETUS_10_QPMS30.80-51-5_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip"
is must be the wrong one?
i used the recovery.img from that and did fastboot devices and it showed up so i did "fastboot flash recovery recovery.img" and it had no errors, it worked just fine so i tried fastboot reboot fastboot but i still got that long list of commands (((
i dont get it, what am i doing wrong?
Click to expand...
Click to collapse
Like the other user did a couple of posts up, you probably have to update your adb/fastboot version.
Beetle84 said:
Like the other user did a couple of posts up, you probably have to update your adb/fastboot version.
Click to expand...
Click to collapse
ok thanks i did that and got version 1.4.3 it sees my device but when i did the fastboot reboot fastboot i got
fastboot: usage: unknown reboot target fastboot
and nothing happened. does anyone know what that means?
ok yes indeed im a huge idiot. i finally got into fastbootd because i downloaded ADB version R30. THATS the most recent adb version and that did the trick! now i got the fastbootd recovery screen!
regardless, thank you all SOOOOO much for taking the time to respond. much appreciated.
im so excited to get flashing!
peace and love
Boot twrp,( no need to flash) -fastboot boot (whatever you named the recovery img).img- then -adb reboot fastboot-
Should go to fastbootd. future reference
brucedroid031 said:
Boot twrp,( no need to flash) -fastboot boot (whatever you named the recovery img).img- then -adb reboot fastboot-
Should go to fastbootd. future reference
Click to expand...
Click to collapse
good look thank you
I recently bought an unlocked Moto G Play 2021 with the intent of learning how to flash custom rom's etc. The steps I've done so far are below.
Went to Motorola's site and got the code to unlock the bootloader
Waited for the "OEM Unlock" button to be available in the Developer Options menu.
Followed the directions Here to try to get an unofficial version of TWRP installed.
when I type fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img Using the vbmeta.img from the link above, I get some kind of anti-rollback error and can't boot to recovery.img
So far, what I've found says I need to be on Android 10 for this to work but I can't find a stock rom of Android 10 for this device. Electimon posts AOSP builds for this phone Here so I assume there's a way to get this to work, I just don't know what it is and I've gone through these threads a few times now and can't piece it together. Any assistance would be greatly appreciated.
Additionally, thanks Electimon for doing those AOSP builds.
Try to download Miracle Thunder Modified (Withouth Box) like there are other tools, but if not, just try to root. kind of for you to root, download the TWRP app and install or use Flashify to flash img using root
Luiz Vinicius said:
Try to download Miracle Thunder Modified (Withouth Box) like there are other tools, but if not, just try to root. kind of for you to root, download the TWRP app and install or use Flashify to flash img using root
Click to expand...
Click to collapse
I'm not sure entirely what happened, but after I used the TWRP app my phone bricked and I had to use the Lenovo rescue app on my pc to factory reset it.
First update your phone
Then download twrp from
https://forum.xda-developers.com/t/...st-port-but-everything-works-amazing.4330775/
Then adb reboot bootloader
Then fastboot flash recovery MotoGuamnaFixed2.img
then you have twrp installed then you can go thru the steps at
https://forum.xda-developers.com/t/rom-12-0-guamna-aosp-12-0-monthly-builds.4392303/#post-86610039
to get Android 12 couatom rom
svoc said:
First update your phone
Then download twrp from
https://forum.xda-developers.com/t/...st-port-but-everything-works-amazing.4330775/
Then adb reboot bootloader
Then fastboot flash recovery MotoGuamnaFixed2.img
then you have twrp installed then you can go thru the steps at
https://forum.xda-developers.com/t/rom-12-0-guamna-aosp-12-0-monthly-builds.4392303/#post-86610039
to get Android 12 couatom rom
Click to expand...
Click to collapse
Thank you for the response!
I made sure my phone was on wi-fi and checked for updates. I then rebooted to fastboot and flashed recovery to the MotoGuamnaFixed2.img. I still got a blank screen when I tried to reboot to recovery. I then rebooted to fastboot manually and did
fastboot flash recovery_a MotoGuamnaFixed2.img
fastboot flash recovery_b MotoGuamnaFixed2.img
It said ok both times, and when I try to reboot to recovery, I get a blank screen that I can't interact with. Pressing the power and volume buttons does nothing. Rebooting and letting the phone go through the boot process, to include waiting for the warning about the unlocked bootloader to go away results in a blank screen.
I also tried booting to fastboot and selecting "Recovery Mode" from the fastboot menu. Same result. That being said, I followed the instructions in the second link anyway, which are
fastboot -w
fastboot update (filename).zip
Now my phone has a blank screen I cannot interact with, but when I type "adb devices" I see the phone. Typing "adb shell ls -l" shows there is definitely a file structure there.
Just download the rom for the version that your device is unzip it and manual flash each one to the correct spot except recovery flash the twrp and then reboot and let me know look at flash file.xml to see where to flash each IMG and bin to make shur you download your rom and not another one for the same device but different carrier what it sounds like to me is happening is you downloaded the wrong ROM when you tried to do a force update
Send me a screenshot of your about device screen please I might need to make a change to a few things to get it working
I'm stuck in a boot loop right now. WIll the output from fastboot getvar work?
What carrier do you have
Download your rom first then follow my last post to get it back out of a bootloop
svoc said:
What carrier do you have
Click to expand...
Click to collapse
It's an unlocked phone, no carrier, no SIM. I did the factory reset with the Lenovo rescue tool and sent you the screen shot of the device info page.
Update - svoc has spent a crap ton of his personal time trying to help me with this. I've learned a bunch and wanted to publicly acknowledge his willingness to go way above and beyond trying to get this working.
I don't understand why I can't get twrp to boot I'm not for shut what the problem is if any one has any idea please let me and I will try
Big thanks to svoc for all the phone calls and troubleshooting my device, that is apparently possessed by at least 3 demons and a donkey. There are two links below. The first is the link to the intstructions that worked.
The second is to the compressed file that gave me a degoogled android. It's really, really basic and you'll have to side load the app store of your choice onto the device but it works.
*NOTE* I have not used a sim card or tested the cellular capability. If you do the things below and it doesn't work, reboot to bootloader and flash the radio.img with the one from your stock rom, which can be obtained from lolinet.
Any custom ROMs out there for Moto g play 2021 (guamna)?
Can't find any custom ROMs for this device. I guess it is too early. I'll probably have to get another phone. Can't even find a twrp for it. New to this. Any suggestions?
forum.xda-developers.com
https://github.com/phhusson/treble_experimentations/releases/download/v412/system-squeak-arm64-ab-vanilla.img.xz