So, this is what happened, and I have no idea how to fix this, nor I am going to try something made for other devices unless it's my only choice.
I woke up one day after wanting to revive this phone, and I realise it's bricked, totally. No Charging animation, bootup, not even Fastboot Mode.
If I connect it to Windows just the way I do to activate Fastboot, I get a ton of drives on the main computer folder, which all need formatting. (http://imgur.com/hoxrbaw) Only one can be read, but it has quite some weird files. (http://imgur.com/fAHyaly).
The Device Manager shows me quite a weird driver, called QHSUSB_BULK (http://imgur.com/b9KPIVT).
I did re-flash the Factory ROM using the correct drivers, the correct ROM and Coolpad Download Assistant v1.86.
There is nothing else I know about...
http://imgur.com/a/D4QCo
Is there any way I can recover my phone?
Thanks,
-TheTNTLovers
The Only thing I managed is to do nothing because I don't have an identical phone. Can someone send me an eMMC file of Vodafone Smart 4 Turbo 890N?
-TheTNTLovers
Take out the battery and put it in again. I've got that exact phone model and it happens all the time. It was especially scary as it happened after I first backed up via FlashFire.
Unfortunately, I did this quite a lot of times, for over 20 times, and nothing.
Do you have the same phone and can you provide me a eMMC image from it? so I can re-flash it and make it work again...
Thanks!
I managed to get a red Charging LED for about 5 seconds, then it stopped. I re-plugged it in and nothing.
I took the battery out and re-plugged it in, then I got the same LED, but shorter.
Unfortunately, that is quite all I got.
I can't do much but trying YGDP, but this is all I know for now.
Is there something I am missing?
I believe that I hard bricked by trying to install another OS on it, but the cable got damaged and we got a bit of an error that hard bricked the device.
Can you guys give me any bit of advice on this specific phone?
TheTNTLovers said:
Unfortunately, I did this quite a lot of times, for over 20 times, and nothing.
Do you have the same phone and can you provide me a eMMC image from it? so I can re-flash it and make it work again...
Thanks!
Click to expand...
Click to collapse
I do, but I literally have no idea what an eMMC image is. I CAN provide you with everything else. To my understanding, there are actually no ROMs for this phone, which is disappointing.
It means a backup image made from the phone with a certain flash tool. If you make one, I need both the image AND the flash tool you used.
I already sent the phone to service, and I will have it replaced. If you can supply me with ANY info about this phone I had trouble with, then please do.
Thanks,
TheTNTLovers.
Would a *complete* FlashFire backup work? It backs up literally everything.
Can someone send me an eMMC file of Vodafone Smart 4 Turbo 890N?
Hi, we need proper loader for this device. All other files can be extracted from cpb. I have nck, umt and infinity boxes, but they don't support it. If anybody can share a loader to flash in edl mode it will be great.
Related
I am assuming no one has bricked this device yet but I believe I just did I am rooted and stuck at a welcome screen if anybody has a solution please help! if not I'm going to the store Saturday and telling them a silly lie
Yeah I just did too :/ I installed chainfire 3D and now it stays at the Verizon loading screen. It doesn't shut off, only reboots to this screen. Safe mode doesn't work. I'm hoping there is a way to fastboot, factory restore, etc. via USB. But I think I'm SOL
I just went up to the Verizon store and play dumb I was able to get mine replaced
Sent from my HTCONE using Tapatalk 2
I figured as much. I talked to someone over the phone and they said to bring it in for a replacement. So I'm going in tomorrow for a new one. Lesson learned haha
Sent from my XT907 using Tapatalk
Really hoping someone has came out with a unbrick/really BootLoop of Doom...
So I know a little about android and learn quick and there is very little information on the verizon ellipsis 7. Just so happens I bought one from a side shop and figured out Framaroot will easily root this device. Well you can guess what happen from there. All was going well until i rebooted with rom toolbox pro to change the font format for the second time. Now ever since it hasn't made it past the verizon screen and i cant take it back. Is there any possible way at all of somehow getting a custom recovery on this thing? Or even better a unbrick/bootloop? Oh and I CAN get it to go into stock recovery. Tried the Clear eMMC and Safe Mode but no luck.
Im in the same situation, I'm not able to boot into safe mode and clearing the emmc (formatting /data) doesn't seem to help either. I believe /data is just the user saved data, system data remains the same and is still corrupted. I had rooted, installed xposed framework and a few modules, rebooted fine the first time, but when I went to go change a setting within Ultimate Dynamic Navbar to make the stock navbar hide or not to hide, the script it used killed the tablet and now my wife's valentines day present is stuck in a bootloop. I'm going to try and take it back to verizon tomorrow after work, hopefully I can get yet another free tablet from big red... rvajuggalo said he was able to get it replaced right away even though it was rooted, anyone think I'll be fine taking it back as well? Or should I just wait til someone comes out with a fix for this issue?
wonton9224 said:
Im in the same situation, I'm not able to boot into safe mode and clearing the emmc (formatting /data) doesn't seem to help either. I believe /data is just the user saved data, system data remains the same and is still corrupted. I had rooted, installed xposed framework and a few modules, rebooted fine the first time, but when I went to go change a setting within Ultimate Dynamic Navbar to make the stock navbar hide or not to hide, the script it used killed the tablet and now my wife's valentines day present is stuck in a bootloop. I'm going to try and take it back to verizon tomorrow after work, hopefully I can get yet another free tablet from big red... rvajuggalo said he was able to get it replaced right away even though it was rooted, anyone think I'll be fine taking it back as well? Or should I just wait til someone comes out with a fix for this issue?
Click to expand...
Click to collapse
I was able to get a new one and mine was stuck in a boot loop
Sent from my XT907 using Tapatalk
Elipsis Bootloop Help!
rvajuggalo said:
I am assuming no one has bricked this device yet but I believe I just did I am rooted and stuck at a welcome screen if anybody has a solution please help! if not I'm going to the store Saturday and telling them a silly lie
Click to expand...
Click to collapse
If anyone has a clean copy of the system or firmware directories can you please share with me? --- Also if anyone knows how to get into the stock recovery without android debugging please explain? On a final note if anyone has a custom recovery that they could share that would be amazing as well. I'm in a bootloop and have been stuck in it for a couple weeks. Any assistance would be most appreciated.
dduncan55330 said:
I was able to get a new one and mine was stuck in a boot loop
Sent from my XT907 using Tapatalk
Click to expand...
Click to collapse
Thanks, that confirms it for me, I'll definitely take it back tonight, hopefully it's in stock and not back-ordered
wonton9224 said:
Thanks, that confirms it for me, I'll definitely take it back tonight, hopefully it's in stock and not back-ordered
Click to expand...
Click to collapse
VZW made me send my ellipsis to them for the screen issue after update, i unrooted it before sending it. They were able to fix it somehow because they sent mine right back fixed(i wrote down the serial)
mtk_droidroot_backup_Verizonellipses...HERE
Backed up my QMV7B before i Bricked it, now ive got two mtk paperweights pm me ,I'll link you to a backup on my drive. also bookending my desk is a lovely alcatel oone touch fierce 7024n which proudly boasts "ERROR 101 This phone has been flashed with unauthorized firmware and has been locked." niether of these will respond to any flash utility ive been able to conjure
Maybe you can use it. I need some hands on guidance flashing these. way too many tutos,way too many fllashtools, way too many drivers, usb cables, homemade serial cables, linux distros ,windows xp,7,8,8.1, hours, days,weeks,....... you get the picture.
apt-get ME_A_STRAIGHT_JACKET!
I know it can be done, i would like to learn from someone who ddoes it. its taking way to long to teach myself. and i still kinda like my wife but i doubt shell take much more.
#BRICKED --help
dereksilvers said:
Backed up my QMV7B before i Bricked it, now ive got two mtk paperweights pm me ,I'll link you to a backup on my drive. also bookending my desk is a lovely alcatel oone touch fierce 7024n which proudly boasts "ERROR 101 This phone has been flashed with unauthorized firmware and has been locked." niether of these will respond to any flash utility ive been able to conjure
Maybe you can use it. I need some hands on guidance flashing these. way too many tutos,way too many fllashtools, way too many drivers, usb cables, homemade serial cables, linux distros ,windows xp,7,8,8.1, hours, days,weeks,....... you get the picture.
apt-get ME_A_STRAIGHT_JACKET!
I know it can be done, i would like to learn from someone who ddoes it. its taking way to long to teach myself. and i still kinda like my wife but i doubt shell take much more.
#BRICKED --help
Click to expand...
Click to collapse
Do you think I could get a copy of that backup file?
DYI
rvajuggalo said:
I am assuming no one has bricked this device yet but I believe I just did I am rooted and stuck at a welcome screen if anybody has a solution please help! if not I'm going to the store Saturday and telling them a silly lie
Click to expand...
Click to collapse
If you're willing to open the back plate. (Back plate just pulls off. I'd suggest opening the sim/sd card slot and using that to pull it off. You need to disconnect the battery wait a few seconds, reconnect and then boot into recovery.
1. Black plate removal
2. Disconnect battery
3. Wait a few seconds
4. Reconnect battery
5. Press and hold Power and Down volume button until you see "Powered by Android"
6. Release the power button continue to hold down volume
7. Once in Factory recovery mode choose your best option
(I just factory reset it)
:good:
-love
A new development, possibly.
dereksilvers said:
Backed up my QMV7B before i Bricked it, now ive got two mtk paperweights pm me ,I'll link you to a backup on my drive. also bookending my desk is a lovely alcatel oone touch fierce 7024n which proudly boasts "ERROR 101 This phone has been flashed with unauthorized firmware and has been locked." niether of these will respond to any flash utility ive been able to conjure
Maybe you can use it. I need some hands on guidance flashing these. way too many tutos,way too many fllashtools, way too many drivers, usb cables, homemade serial cables, linux distros ,windows xp,7,8,8.1, hours, days,weeks,....... you get the picture.
apt-get ME_A_STRAIGHT_JACKET!
I know it can be done, i would like to learn from someone who ddoes it. its taking way to long to teach myself. and i still kinda like my wife but i doubt shell take much more.
#BRICKED --help
Click to expand...
Click to collapse
After making edits in system files I broke my QMV7B. Hangs on powered by android logo. In a panic, I wiped emmc from factory more (Chinese).. This reset ADB keys, and complicated matters further. After some digging I may have caught a break... I have figured out a way to stop and suspend the tablet in it's pre boot, or preloader, state. While suspended, it maintains COM3 connection with SPFT, and does not power cycle on and off. It also successfully installs it's onboard Preloader driver without error. Problem is that I need help attempting flash (for best chances)...
needing stock 4.4.4 fit the qmv7, or possibly advice on stock recover if possible.. I have successfully flased devices with Odin before, and have rooted almost every I have had.. I just want the best chance for success, and not to full brick the tab.. this could also be a solution for newer devices as well, but would like to for a good developer to speak with me before I post my findings. I will also post if I get the stock room compatible for flashing with SP Flash tool.. thanks guys..
Help
Please post specifics on how you achieved suspending in Preloader mode. That would help me alot.
I really need the un-rooted qmv7a stock rom, if any one could provide, that would be fan-freaking-tabulous lol...
no, for real i need the stock rom. I'd really appreciate it.
BTW
if you wanna get clean root on this device, i suggest this- http://forum.xda-developers.com/showthread.php?t=2748169
(has nothing to do with my need for a clean start, that was my own carelessness...)
Bondaddict said:
Please post specifics on how you achieved suspending in Preloader mode. That would help me alot.
Click to expand...
Click to collapse
Needle point method at USB port
ellipsis 7
I root my ellipsis 7 and install clockworkmod recovery after reboot in recovery struck on boot loop and not even access on recovery mode plz help
anybody still own one of these? lol
---------- Post added at 04:59 AM ---------- Previous post was at 04:41 AM ----------
LoveAboveAll said:
If you're willing to open the back plate. (Back plate just pulls off. I'd suggest opening the sim/sd card slot and using that to pull it off. You need to disconnect the battery wait a few seconds, reconnect and then boot into recovery.
1. Black plate removal
2. Disconnect battery
3. Wait a few seconds
4. Reconnect battery
5. Press and hold Power and Down volume button until you see "Powered by Android"
6. Release the power button continue to hold down volume
7. Once in Factory recovery mode choose your best option
(I just factory reset it)
:good:
-love
Click to expand...
Click to collapse
Hey man it's been 5years & I just wanna say thank you for posting this as I just managed to get into factory mode thanks to your comment xD. factory mode didn't help me a bit but maybe when I get to a PC I can use mtk tools to get a shell or something from there. Thanks again and if anybody has anything more than what's on here about this tablet please contact me as I feel like the last human on Earth with one ????
Yeh
I have one??
And Reading all topics about rooting this tablet...i'm afraid to do that?
Alright. I need some advice one last time, I swear... after this I'm not going to try to do anything.
Phone worked quite well for 2 days. I was enjoying this rom quite a bit. I decided to change the DPI down to 560. I saw that some others in this thread had done so quite easily... so I used this app to change it. Made the change to 560, granted supersu permission and rebooted. Only problem is that... the phone has yet to turn back on. At the moment the only thing I can get it to do is give me a screen that shows a large white empty battery with a cable leading up to it and a hazard exclamation mark in the bottom right when I am trying to put it in download mode. I have tried on multiple computers to restore back to stock following these directions. The best that happens is my computer recognizes an unrecognized device. No luck.
I would love to change the buildprop back or anything, but not even adb recognizes the device.
Otherwise, nothing. I can't get into recovery. I can't get the phone to start at all. All black screen. I can't get any reaction out of it. Any advice would be helpful, I'm on hour two of this. I realize that this is most likely not a problem with the rom, but wanted to see if anyone else had an issue and has advice/let anyone else who's thinking of changing the DPI and shared my troubles reconsider.
Thanks again!
The empty the battery logo is because the phone is dead try charging it for like 30 mins. Also it seems that app you used is 3 years old so it does not support lollipop or even kitkat. After charging it try get it into recovery and restore a backup. If you don't have a backup try wiping your data and cache.
1619415 said:
The empty the battery logo is because the phone is dead try charging it for like 30 mins. Also it seems that app you used is 3 years old so it does not support lollipop or even kitkat. After charging it try get it into recovery and restore a backup. If you don't have a backup try wiping your data and cache.
Click to expand...
Click to collapse
Thanks for the reply!
That emblem only shows up when the battery is removed and I'm trying to put the phone in download mode. So it makes sense. Any other ideas? The battery that I'm using is about 80% full. I still can't find a way to recovery mode.
What other information can I provide to help you out?
Well when your in download mode it does not take any commands can you get the lg powered by android screen? Or just nothing happens? If nothing at all happenes it is most likly bricked. If it boots to the lg screen it is most likly soft bricked.
Bricked- Phone is dead and very very hard to fix if there is a fix
Soft Brick- No OS so you have to reinstall a rom could also be, because of apps.
1619415 said:
Well when your in download mode it does not take any commands can you get the lg powered by android screen? Or just nothing happens? If nothing at all happenes it is most likly bricked. If it boots to the lg screen it is most likly soft bricked.
Bricked- Phone is dead and very very hard to fix if there is a fix
Soft Brick- No OS so you have to reinstall a rom could also be, because of apps.
Click to expand...
Click to collapse
No screen. For anything (other than described).
This is exactly what I was afraid of, but my phone has always been odd. This dead battery screen has always shown up in download mode... even when my phone worked, I've never had the firmware update screen. Which has always been weird to me.
However, the only time my phone shows anything is with the dead battery screen. During such it will show up as an unrecognized device when attached to a computer, again... it's always done this. I was just curious if there was something else or a suggestion that someone more experienced then myself might have.
No that I read it, it sounds like there maybe a very slim chance of getting your device to work. If you mange to get some drivers for the unreconized device driver you maybe able to send adb and fastboot commands. I found this one tool (will limk below) that is call cydia impactor I found in one of rootjunky's toolkit files. I used this one function that was able to make drivers for my sony smartwatch 3 and phone. I will link for the direct download make sure to extract the zip. Inside of the zip you will find another zip called "Impactor_0.9.14.zip" make sure to extract it to it's own folder. If you want you can delete the first folder juat save the impactor folder. Then run the program called "Impactor" can connect your phone to the computer and click on the tab called "USB" then click the button called "Driver Scan". Follow any on screen instructions. It should now generate a driver for your phone if all went well and it will be reconized. Then you should be able to run adb reboot recovery or fastboot reboot-bootloader. The fact that your computer is even seeing the phone tells me that it has so hope of being fixed because your computer see's it. Your device might be in a bootloop of some sort. You may just have no os installed and it may have just glitched.
Download: http://rootjunkysdl.com/getdownload.php?file=Tegra Note 7/ADB root.zip (will immeditly download it)
Worst case scenario, you may try this, or at least read it for general info. I don't think you'll have to go this far though
http://forum.xda-developers.com/showthread.php?t=2582142
[FIX] NO Recovery mode, No download mode, after OTA on rooted LG G2
i changed my dpi once and it bootlooped on me. i was lucky enough to get into recovery and then i restored the data partition from an older nandroid.
i agree with 16. it does sound like the drivers may not be loaded up properly if your computer recognizes a device. have you tried the official lg drivers?
What system are you guys running?
Well, I've found out that for whatever reason... on my phone I have to take out the battery for a period of ~5-10 mins on any change DPI, system rom update, anything. Otherwise, my phone will not turn on. So if someone else find this, give it a try.
First of all, I want to apologize if I put this question in a wrong section or place. I'm a newbie around here at XDA and been following this since my eyes were opened for android stuff. I'M JUST REALLY SEEKING HELP. :crying:
It's been 6 months since I hardbricked my Huawei Y6. I only used it for two weeks but when I messed it up, it's been dead ever since. I have searched almost every corner of Google and XDA for a solution but none of them ever came up with one that is successful. I tried to recover it and sht to no avail. It's a Snapdragon 210 (MSM8909) btw, and Qualcomm. Used lots of things like QPST, EMMC DL tool, and whatever those other things are but here's really my problem..
Huawei Y6 has no firmware available online. If there is, only that ****ty UPDATE.APP. I did extract it and I don't know what to do with these files. There's no PROG_EMMC_FIREHOSE_8909.MBN, the PATCH0, and that other one which are what I am supposed to be using with QFIL. Anyway, NO DOWNLOAD MODE, NO RECOVERY MODE, NO FASTBOOT, and completely dead. I did something terrible internally to the device, I know.. messed up the partition table. I did bring it to lots of technicians around here and to the service center but all of them declined and denied me saying that it's dead and must be replaced. But if plugged in to a computer, LED will slowly blink Red. And.. it's detected as Qualcomm HS-USB QDLoader 9008.
Please help me.. 6 months = no phone = DEAD. </3 I know that this phone is not that popular because there's not that much things about this online. I really want to have this fixed.. I'm willing to do everything possible in return. Just help me. This is last resort and my only hope. HELP MEEEE. Thank you, XDA.
Update.. I somehow did something nice to it. It now can access fastboot but do not boot.
I got it in progress. Flashed system.img, boot.img, recovery.img, through fastboot flash and erased userdata and cache. If I turn it on, will just vibrate once. Can't enter recovery nor normal boot. But if plugged in, will be detected as Android Bootloader Interface. HELLLPPPPP!!!
And now.. it got even weirder. I flashed all its stock rom files (those that were extracted from UPDATE.APP) and now when booted, LED goes to RED-GREEN-BLUE cycle. What the heck is going on with this phone? It doesn't vibrate anymore and still can't go to recovery.
i also have this phone in same 9008 port condition , is there any solution to revive this ?
how to get the files to flash with QFIL ?
dear all
did you find the solution ??
I only want my Wogiz WX40 to work properly again. It somehow got into a booting loop and I spent many hours figuring out how to flash it due to drivers acting unexpectedly, incorrect instructions for my device and so on.
I finally got it to flash with stock software I got from needrom using SP Flash Tool. However 1) none of the bottom keys work now and 2) it looks as if the resolution is set too high for the device and I think there is also some slowness when using the phone. I have tried clicking upgrade firmware and formatting the entire flash and using different versions of the software and the result is always the same - the bottom keys not working in particular makes it unusable. I tried downloading the stock rom from another location but after downloading it said I needed a password.
So what is the next thing I can try? I'm at my wit's end here and just want it to work again. Thanks for all help.
Anyone know what I should try? For example what custom RAM + firmware might I want to try? At this point I don't care what it is as long as it works. It's a MT6580 device if that helps.
God, I FINALLY got it working.
In case there's anyone else that runs into this: My mistake was getting the stockrom from needrom, every one of those roms for this phone is bad. Get the rom from shareas.us and use SP Flash Tool to flash it, and even then you have to try to get the one that isn't password protected with no password. Leave the battery in, turn the phone off, use option "format + download" in the software and click download BEFORE you connect the phone, NOW connect the phone and after a little while it will start downloading. Disconnect the phone when it's done and switch it on, it will take a REALLY long time to boot up the first time but it should then work.
That's what came from hours of trying to get it to work. The tutorials etc. online are so confusing, even some incorrect instructions like saying I should take out the battery that are completely false and I would never have gotten it to work if I paid more attention to them. I don't ever want to go through something like that again. I finally have my phone back.
Hi hello
So here’s a head scratcher I hope someone can help me with that won’t involve replacing my main board.
Got myself the p20 lite (ANE-LX1 C432) - Single Sim.
I unlocked the bootloader with Huawei just before they stopped handing out the codes. All was good and happy with the world.
Rooted with Magisk and Was busy messing around With Termux, Linux deploy, Mobile Terminal and some pretty basic stuff. I’ve been out of the android scene for a while so was getting reacquainted with the scene.
Anyway. I was messing around in the terminal in a root shell just fixing basic permissions after messing up my termux environment as root. Phone randomly rebooted (I must’ve messed with the wrong folder -no idea which) came back on and my IMEI and baseband were gone.
No worries, I thought. Happened tonnes of times with my previous Devices (looking at you Samsung) just a quick restore or flash and all will be happy again.
Yeah, not quite.
Note that up until this point I hadn’t touched the system partition (probably besides the mobile terminal mishap -no idea)
So over the last week or so I have tried everything. Restore from Twrp backup. Flashed stock through fastboot, through erecovery. Those flashed ok but didn’t fix it.
Putting numerous different update.app FULL & OTA updates in dload folder on SD and internal all failed. Only used my builds version of course and only ones firmware finder deemed compatible/available
Then I got desperate (read: stupid) Decided to take the unpacked firmware files and flash whichever ones twrp would let me. First tried just the modem files. Didn’t help. Then just went through the list and flashed all I could.
I think the kicker came in when I installed the Trustfirmware.img because once I did that I rebooted and now I was stuck in an endless boot loop. No way to get into recovery. Not with their ton combo nor adb/fastboot.
I still had access to fastboot at this point at least and started doing every single thing suggested all over the net just trying to get back to stock.
Tried the unbrick option on The Huawei Multi-Tool. Flashed ok. Phone still wouldn’t boot. Did it a few times with 3 approved versions. Nothing. Only access to fastboot otherwise I was in a boot loop with error mode error no 15 and the verification failure (Attached below)
Last thing I tried after reading online was to relock my boot loader and flash stock. So I locked it with Huawei Multi-Tool. Reboot......
Now I don’t even have access to fastboot. My PC’s (windows and Linux) don’t even acknowledge it and holding volume down in all the weird and wonderful ways and times does nothing. All I get is startup Huawei Logo, Error Mode as per pic Below and then reboot. That’s it.
I’m assuming it’s trying to do a factory reset after relocking the bootloader (if it even locked properly, can’t check) but it can’t get into recovery/erecovery. I dunno ?
That’s my essay of where I’m at. Warranty is already void so not an option and I don’t want to buy a new mainboard (may as well buy a new phone).
So here I am. Is this my life now or does anyone have any magic tricks to possibly suggest?
Pyrolectic13 said:
Hi hello
So here’s a head scratcher I hope someone can help me with that won’t involve replacing my main board.
Got myself the p20 lite (ANE-LX1 C432) - Single Sim.
I unlocked the bootloader with Huawei just before they stopped handing out the codes. All was good and happy with the world.
Rooted with Magisk and Was busy messing around With Termux, Linux deploy, Mobile Terminal and some pretty basic stuff. I’ve been out of the android scene for a while so was getting reacquainted with the scene.
Anyway. I was messing around in the terminal in a root shell just fixing basic permissions after messing up my termux environment as root. Phone randomly rebooted (I must’ve messed with the wrong folder -no idea which) came back on and my IMEI and baseband were gone.
No worries, I thought. Happened tonnes of times with my previous Devices (looking at you Samsung) just a quick restore or flash and all will be happy again.
Yeah, not quite.
Note that up until this point I hadn’t touched the system partition (probably besides the mobile terminal mishap -no idea)
So over the last week or so I have tried everything. Restore from Twrp backup. Flashed stock through fastboot, through erecovery. Those flashed ok but didn’t fix it.
Putting numerous different update.app FULL & OTA updates in dload folder on SD and internal all failed. Only used my builds version of course and only ones firmware finder deemed compatible/available
Then I got desperate (read: stupid) Decided to take the unpacked firmware files and flash whichever ones twrp would let me. First tried just the modem files. Didn’t help. Then just went through the list and flashed all I could.
I think the kicker came in when I installed the Trustfirmware.img because once I did that I rebooted and now I was stuck in an endless boot loop. No way to get into recovery. Not with their ton combo nor adb/fastboot.
I still had access to fastboot at this point at least and started doing every single thing suggested all over the net just trying to get back to stock.
Tried the unbrick option on The Huawei Multi-Tool. Flashed ok. Phone still wouldn’t boot. Did it a few times with 3 approved versions. Nothing. Only access to fastboot otherwise I was in a boot loop with error mode error no 15 and the verification failure (Attached below)
Last thing I tried after reading online was to relock my boot loader and flash stock. So I locked it with Huawei Multi-Tool. Reboot......
Now I don’t even have access to fastboot. My PC’s (windows and Linux) don’t even acknowledge it and holding volume down in all the weird and wonderful ways and times does nothing. All I get is startup Huawei Logo, Error Mode as per pic Below and then reboot. That’s it.
I’m assuming it’s trying to do a factory reset after relocking the bootloader (if it even locked properly, can’t check) but it can’t get into recovery/erecovery. I dunno ?
That’s my essay of where I’m at. Warranty is already void so not an option and I don’t want to buy a new mainboard (may as well buy a new phone).
So here I am. Is this my life now or does anyone have any magic tricks to possibly suggest?
Click to expand...
Click to collapse
Check the second post in this thread:
https://forum.xda-developers.com/honor-7x/help/help-stuck-error-mode-screen-t3735067
kilroystyx said:
Check the second post in this thread:
https://forum.xda-developers.com/honor-7x/help/help-stuck-error-mode-screen-t3735067
Click to expand...
Click to collapse
Thanks for this.
The battery discharged fully about two days ago.
I haven’t tried plugging it in and out as/if it turns on immediately (though even though it shows dead without charger it still comes on immediately).
I’m gonna get a weaker lower amp charger and see if that maybe helps. Fml ?
***UPDATE***
Been at it for hours. Battery is completely flat. But h second I plug it in the the Black Huawei logo comes up ten a few seconds later it’s on the same error screen for a little longer then boot loops like that constantly.
The error isn’t the same as the post in that link though. And I am FRP unlocked.
Eh.
Pyrolectic13 said:
Thanks for this.
The battery discharged fully about two days ago.
I haven’t tried plugging it in and out as/if it turns on immediately (though even though it shows dead without charger it still comes on immediately).
I’m gonna get a weaker lower amp charger and see if that maybe helps. Fml ?
***UPDATE***
Been at it for hours. Battery is completely flat. But h second I plug it in the the Black Huawei logo comes up ten a few seconds later it’s on the same error screen for a little longer then boot loops like that constantly.
The error isn’t the same as the post in that link though. And I am FRP unlocked.
Eh.
Click to expand...
Click to collapse
I guess your previous error was related to ramdisk...
Now what is your current situation?
-What error is showed in the Error mode?
-Can you reach FASTBOOT&RESCUE MODE menu?
-What is your current recovery?
kilroystyx said:
I guess your previous error was related to ramdisk...
Now what is your current situation?
-What error is showed in the Error mode?
-Can you reach FASTBOOT&RESCUE MODE menu?
-What is your current recovery?
Click to expand...
Click to collapse
As it stands I cannot enter fastboot or recovery mode. Update from SD also doesn’t do anything. Battery is completely discharged. And if I leave it on the charger it doesn’t charge, only boot loops.
So with all that the ONLY thing this phone does now is:
- Starts up Showing Huawei logo
- Error Mode Screen with Func No: 15 (bl31 image) & Error No: 1 (security verify failed)
- Reboots
Ths happens whether it’s plugged into the pc’s usb or the charger. Tried all combinations of buttons too.
It has stock recovery as I flashed that back when trying to revert back to stock.
I lost access to fastboot after I locked the bootlaoder again using the Huawei Multi Tool. It’s like it trying to do the factory wipe that it usually would after locking/unlocking the bootloader but is unable to due to the error mode screen.
Sent from my iPhone using Tapatalk
Pyrolectic13 said:
As it stands I cannot enter fastboot or recovery mode. Update from SD also doesn’t do anything. Battery is completely discharged. And if I leave it on the charger it doesn’t charge, only boot loops.
So with all that the ONLY thing this phone does now is:
- Starts up Showing Huawei logo
- Error Mode Screen with Func No: 15 (bl31 image) & Error No: 1 (security verify failed)
- Reboots
Ths happens whether it’s plugged into the pc’s usb or the charger. Tried all combinations of buttons too.
It has stock recovery as I flashed that back when trying to revert back to stock.
I lost access to fastboot after I locked the bootlaoder again using the Huawei Multi Tool. It’s like it trying to do the factory wipe that it usually would after locking/unlocking the bootloader but is unable to due to the error mode screen.
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
I see, it is really bad
My last hope is to be able to do a forced Firmware upgrade. Press power button and VOL + and VOL- simultaneously. Do you see the same as the attached image?
kilroystyx said:
I see, it is really bad
My last hope is to be able to do a forced Firmware upgrade. Press power button and VOL + and VOL- simultaneously. Do you see the same as the attached image?
Click to expand...
Click to collapse
Ah man, I wish it would even do that. It makes no attempt to even pretend to see the sd card update. If I hold all the buttons in it still only comes up with the error mode and reboots.
I popped it open and connected a charger up battery to see if that would help but it doesn’t.
Do you maybe know the pin layout on the inside or know where I could get schematics? Been looking everywhere.
I’m almost done building my own Jtag box and am hoping to bring it back to life by writing straight to the damn thing.
Sent from my iPhone using Tapatalk
Pyrolectic13 said:
Ah man, I wish it would even do that. It makes no attempt to even pretend to see the sd card update. If I hold all the buttons in it still only comes up with the error mode and reboots.
I popped it open and connected a charger up battery to see if that would help but it doesn’t.
Do you maybe know the pin layout on the inside or know where I could get schematics? Been looking everywhere.
I’m almost done building my own Jtag box and am hoping to bring it back to life by writing straight to the damn thing.
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
That is sad!!!
With JTAG and schematics stuff I cannot help you.
What I found recently and it was new for me (I didn't tested yet) is a possibility to install firmware via "dload" folder, but to start installation the stock recovery have to be full functional.
If I found something interesting for you I'll post here.
kilroystyx said:
That is sad!!!
With JTAG and schematics stuff I cannot help you.
What I found recently and it was new for me (I didn't tested yet) is a possibility to install firmware via "dload" folder, but to start installation the stock recovery have to be full functional.
If I found something interesting for you I'll post here.
Click to expand...
Click to collapse
To my knowledge the recovery is installed. Well erecovery. It was working up until I locked the bootloader again and it went into a boot loop instead of doing the factory reset.
Is there any other way to force sd update other than with the dload folder?
Thanks for tying to help, I appreciate it.
Pyrolectic13 said:
To my knowledge the recovery is installed. Well erecovery. It was working up until I locked the bootloader again and it went into a boot loop instead of doing the factory reset.
Is there any other way to force sd update other than with the dload folder?
Thanks for tying to help, I appreciate it.
Click to expand...
Click to collapse
You can check the official documentation about that.
Please let us know how you solved this problem.
kumarsid7 said:
Please let us know how you solved this problem.
Click to expand...
Click to collapse
Still unsolved as of yet.
I’ve finished building my own version of the Riff/Octoplus box as well as a makeshift Jtag. I’m still trying to find and piece together some firmware files and other board software I think I need.
Also, if anyone has any idea where the test point is on this board I’d really appreciate you pointing it out. I cannot find the schematics or any solid documentation anywhere.
I will attach the pics I have of both sides of the board as soon as I get home.
Sent from my iPhone using Tapatalk
in first picture youle see many circles golden 2 smallest is testpoint good luck
Pyrolectic13 said:
Still unsolved as of yet.
I’ve finished building my own version of the Riff/Octoplus box as well as a makeshift Jtag. I’m still trying to find and piece together some firmware files and other board software I think I need.
Also, if anyone has any idea where the test point is on this board I’d really appreciate you pointing it out. I cannot find the schematics or any solid documentation anywhere.
I will attach the pics I have of both sides of the board as soon as I get home.
View attachment 4579956
View attachment 4579957
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
in first picture youle see many circles golden 2 smallest is testpoint good luck
well, try to restore your device using dload method. It needs you to copy the UPDATE.APP in dload folder of an external sd card(formated in NTFS format) and then just press both vol up+down along with power button for a few seconds. It will auto launch huawei e-recovery and will try to flash the UPDATE.APP you stored in ext sd card. This should definitely work.
Dload method doesn't need you to unlock your device or bootloader.
Maybe?
I know it’s a long shot but I still have this phone. If anyone maybe knows if there’s been a way to fix this as of yet please let me know. ?
Lol. Still got this damn thing. Been searching around and seen a few people reporting similar errors. Never find out if they ever solve it though.
So. Anyone maybe have any knowledge to share? Anything at all.
I don't know if you still have your device, but I had the exact same issue with a P10 (VTR-L09)
I was able to fix fastboot using https://github.com/mashed-potatoes/PotatoNV
That tool was designed to unlock the bootloader, but I noticed that It actually flashes a slightly modified version of fastboot.
PotatoNV can also unlock P20 lite bootloader, so you should give it a shot.
Good luck!
If it works, you should be able to flash stock recovery image and then restore the system using the dload folder.
you can Repair it with Software Testpoint and Full Bootloader Unlock ,and then flash a Board Software via Software Testpoint, that helps 100%!!!
use this Firmware Download ANE-LX1
use the Software with logins and you have all what you need.
you must start the Software Testpoint so!!
VIDEO : how to start Software Testpoint P20 Lite
than in Software Testpoint you flash the included Board Software with DC-Phoenix and after that use the included dload update via sdcard and eRecovery mode and your Phone is running!!!
I would unlock the bootloader via Software Testpoint with DC-Phoenix, then the FBLock is unlocked and you can flash as you wish!!!! And the great thing about it is that you don't need an UnlockKey either, you can then read this with HCU client software, the only thing that's stupid is that you need a time-based license for the two programs, which you have to buy.
HCU client download
https://hcu-client.com
DC Phoenix download
https://forum.dc-unlocker.com/forum/modems-and-phones/huawei/155916-dc-phoenix
Since I accidentally bought a 3-day license twice and my P20 Lite is now completely rooted on Lineage 19.1, I can give away 2 access data, which are still valid for 2 days.
you can edit your smartphone with it.
username : bl26457
password : kKncnkMj
username : bl26390
password : JDAZqnkN
Then I wish you a lot of fun with it, hope it helps you if someone else is active in this thread.