So, I won't go into too much details how I got into this one but, in nutshell:
I had CM 12 on my SGS II, tried to flash some ROM's and now when I try to boot my phone it's stuck at Samsung logo.
I can acess recovery (but my PC does not recognize it or it just recongizes it as Android ADB Recovery Interface) and I can acess download mode but I don't know what's the best way out of this mess.
Can someone give me quickest route to some kind of light at the end of the tunnel?
skunky90 said:
So, I won't go into too much details how I got into this one but, in nutshell:
I had CM 12 on my SGS II, tried to flash some ROM's and now when I try to boot my phone it's stuck at Samsung logo.
I can acess recovery (but my PC does not recognize it or it just recongizes it as Android ADB Recovery Interface) and I can acess download mode but I don't know what's the best way out of this mess.
Can someone give me quickest route to some kind of light at the end of the tunnel?
Click to expand...
Click to collapse
Did you by chance make any nandroid backups in TWRP? If so, restore one if them.
Have you tried flashing a smaller Gapps package with your ROM? You probably don't have the system space to fit the larger Gapps packages, that's why the i9100 has to use the re-PIT before flashing CM12, you might need to use the re-PIT with all ROMs newer than CM12, I'm not sure about that though.
Sent from my SM-S903VL using Tapatalk
Droidriven said:
Did you by chance make any nandroid backups in TWRP? If so, restore one if them.
Have you tried flashing a smaller Gapps package with your ROM? You probably don't have the system space to fit the larger Gapps packages, that's why the i9100 has to use the re-PIT before flashing CM12, you might need to use the re-PIT with all ROMs newer than CM12, I'm not sure about that though.
Sent from my SM-S903VL using Tapatalk
Click to expand...
Click to collapse
I didn't do any backups because Cyanogen mod recovery didn't support making and restoring backups! =((((
Well, man, I can't even find a way to transfer files to my PC right now so I don't know how to flash that thing that's why I need solution for that problem first.
skunky90 said:
I didn't do any backups because Cyanogen mod recovery didn't support making and restoring backups! =((((
Well, man, I can't even find a way to transfer files to my PC right now so I don't know how to flash that thing that's why I need solution for that problem first.
Click to expand...
Click to collapse
If you have access to download mode, enter it and flash CWM Kernel recovery and then boot into recovery and wipe data and format system flash cm12 to get isorec support and then flash Isorec TWRP and then reboot recovery again, you should now have twrp 3.0.X.X, now connect your phone to pc and it should recognise your device and you would be able to transfar your files to pc..
After that try rebooting -...as you already have cm12 installed...- and see if it still stuck, then try wiping all including system and internal sdcard and reflash again and see what happens
Edit: use cm11 instead of cm12 as suggested by @TriboDoP
MigoMujahid said:
If you have access to download mode, enter it and flash CWM Kernel recovery and then boot into recovery and wipe data and format system flash cm12 to get isorec support and then flash Isorec TWRP and then reboot recovery again, you should now have twrp 3.0.X.X, now connect your phone to pc and it should recognise your device and you would be able to transfar your files to pc..
After that try rebooting -...as you already have cm12 installed...- and see if it still stuck, then try wiping all including system and internal sdcard and reflash again and see what happens
Click to expand...
Click to collapse
Hi
I would do it also als you described but would not flash cm 12 because this old rom has no isorec Kernel
You could use this cm 11 which has Isorec kernel:
https://www.androidfilehost.com/?fid=673368273298924336
Regards!
Sent from my ME173X using XDA-Developers Legacy app
TriboDoP said:
Hi
I would do it also als you described but would not flash cm 12 because this old rom has no isorec Kernel
You could use this cm 11 which has Isorec kernel:
https://www.androidfilehost.com/?fid=673368273298924336
Regards!
Click to expand...
Click to collapse
Cm12 has no isorec support and cm11 has it???!!!
Well..that....is....WEEEEIRD !! :laugh:
I mean cm12.1 is newer, right?
MigoMujahid said:
Cm12 has no isorec support and cm11 has it???!!!
Well..that....is....WEEEEIRD !! [emoji23]I mean cm12.1 is newer, right?
Click to expand...
Click to collapse
Last official cm12.1 ist from 2015.
Isorec started 2016.
The link is for unofficial cm11 from 2017.
I tried this one and i am 100% Sure.
Sent from my ME173X using XDA-Developers Legacy app
TriboDoP said:
Hi
I would do it also als you described but would not flash cm 12 because this old rom has no isorec Kernel
You could use this cm 11 which has Isorec kernel:
https://www.androidfilehost.com/?fid=673368273298924336
Regards!
Click to expand...
Click to collapse
Cm12.1 has isorec support mate:
TriboDoP said:
Last official cm12.1 ist from 2015.
Isorec started 2016.
The link is for unofficial cm11 from 2017.
I tried this one and i am 100% Sure.
Click to expand...
Click to collapse
Ok, maybe the last build that support isorec isn't available to download but the screenshot i attached is from the official thread
TriboDoP said:
Last official cm12.1 ist from 2015.
Isorec started 2016.
The link is for unofficial cm11 from 2017.
I tried this one and i am 100% Sure.
Sent from my ME173X using XDA-Developers Legacy app
Click to expand...
Click to collapse
Of course there could be some unofficial cm12 from 2016 and newer.
Sent from my ME173X using XDA-Developers Legacy app
TriboDoP said:
Of course there could be some unofficial cm12 from 2016 and newer.
Click to expand...
Click to collapse
I have the latest official cm12.1 nightly, it was released in 23/1/2016 and it supports isorec , any way it's ok, it won't matter cm11 from cm12.1 the most important is to solve the problem, then he can flash what ever he wants
MigoMujahid said:
I have the latest official cm12.1 nightly, it was released in 23/1/2016 and it supports isorec , any way it's ok, it won't matter cm11 from cm12.1 the most important is to solve the problem, then he can flash what ever he wants
Click to expand...
Click to collapse
Perfectly allright!
Now we sorted it out together.
Cm12 release ist 2015 and nightly 2016.
Any rom from 2016 and newer has isorec.
I did not want to interfere with your help but i noticed quite a number of people here which are on release build having trouble to Install isorec Recovery.
Cheers!
Sent from my ME173X using XDA-Developers Legacy app
Related
This recovery is more or less useless now. Files will still be hosted though.
ClockworkMod Recovery
Samsung Galaxy SII GT-I9100
All right guys im just going to keep this real nice and simple. Purpose of thread:
Latest CWM Recovery
Kit Kat 4.4 ROM Installation Compatible
Centralized Place to Put The Latest Recoveries
Just a heads up. This is NOT meant to be used as a kernel. I compiled these recoveries from source and only the recovery module is built therefore YOUR PHONE WILL NOT BOOT COMPLETELY AS THERE IS NO KERNEL. I made these recoveries so that users can flash
From ICS/JB to KK with ease
Flash This Over DorimanX Kernel So That You Can Update Your Kit Kat ROM
And Resolve Status 7 Errors When Flashing Kit Kat ROMs On A Out-Dated CWM Recovery
How To Use:
To Flash a Kit Kat ROM From a Out-Dated Recovery CWM Version Less Then 6.0.4.4:
Flash This CWM Recovery File (Does Not Matter Which Version You Pick Just Take The Latest) And Reboot Back Into Recovery Via The Option In The Advanced Menu
You Should Now Have A Grey Coloured Recovery With Version 6.0.4.X
Follow ROM Installation Guide From ROM Thread
Recovery Versions
Click The Numbers To Download e.g. 6.0.4.6
6.0.4.6 (Compiled From CM10.2 JB 4.3.1 Soruce)
6.0.4.7 (Compiled From CM11 KK 4.4.2 Source) (LATEST)
Thanks For Reading :good:
P.S. This is my first thread in the Galaxy SII forum
XDA:DevDB Information
ClockWorkMod Recovery For SGSII GT-I9100, Kernel for the Samsung Galaxy S II
Contributors
-Grift-, cyanogen
Kernel Special Features: Kit Kat Compatible CWM
Version Information
Status: Stable
Current Stable Version: 6.0.4.7
Stable Release Date: 2014-01-29
Created 2014-01-29
Last Updated 2014-08-16
good job! but i have to ask is Stweaks compatible?
Thanks for your efforts. Download link?
EDIT: Found it
edd89 said:
good job! but i have to ask is Stweaks compatible?
Click to expand...
Click to collapse
Its just the recovery module no use for stweaks :angel:
spectator123 said:
Thanks for your efforts. Download link?
Click to expand...
Click to collapse
Woa you guys are fast.. Just added
haha yes we are buddy keep up the good work
tried to flash this via CWM...does not work. am i doing anything wrong?
how do i install it normaly?
QuAn64m said:
tried to flash this via CWM...does not work. am i doing anything wrong?
how do i install it normaly?
Click to expand...
Click to collapse
Was there a error code?
Edit: Wait hold on you are using a GT-I9100G?????? This is only for the Exynos Galaxy SII GT-I9100/P/M/T
-Grift- said:
Was there a error code?
Click to expand...
Click to collapse
code 7 :-/
---------- Post added at 04:51 PM ---------- Previous post was at 04:29 PM ----------
QuAn64m said:
code 7 :-/
Click to expand...
Click to collapse
oops...my fault...i use a sgs2 G version. sorry !
can i flash this recovery on jb stock recovery??
scorpion.hbs said:
can i flash this recovery on jb stock recovery??
Click to expand...
Click to collapse
No you cannot but the fastest way to get from stock 4.1.2 to Kitkat 4.4 is to
1. Download this into external SDcard
2. Download my recovery and what ever ROM+Files you need into internal/external
3. Flash first file in stock recovery
4. Flash my recovery, reboot back into recovery
5. Wipe data+cache (factory reset)
6. Flash the ROM+Files
7. Reboot
:good:
@Grift, must say have been following your work/posts for sometime now and find/enjoy the way you can explain a lot of ( detail ) clearly without using many too English words. haha.
Thank you very much for this post & code CWM kk compatible.
foot note/tip. upgrade/flash Direct from ICS404 to KKat is possible But the user Must Format /system /data /cache within CWM Kkat as normal factory reset doesn't work for such a big version jump.(my thoughts/theory only).
Usual warning Nandroid backup First as all Rom data Lost doing it this way.
Copy of request below if possible. @Grift. If possible can you release a Temporary version of your (CWM kitkat with out kernel).
Similar to what Philz was releasing for GT i9100.
Reason for request. Is at moment Dorimanx kernel has older cwm. So when I flash permanent CWM kk compatible then re-flash Dori it can break 2nd ROM boot access/entry.
Therefore if possible a Temp version of what you are doing/releasing would be Perfect for my & others dualboot kitkat problems.
Thanks in advance bmad.
Barry Mad said:
@Grift, must say have been following your work/posts for sometime now and find/enjoy the way you can explain a lot of ( detail ) clearly without using many too English words. haha.
Thank you very much for this post & code CWM kk compatible.
foot note/tip. upgrade/flash Direct from ICS404 to KKat is possible But the user Must Format /system /data /cache within CWM Kkat as normal factory reset doesn't work for such a big version jump.(my thoughts/theory only).
Usual warning Nandroid backup First as all Rom data Lost doing it this way.
Copy of request below if possible. @Grift. If possible can you release a Temporary version of your (CWM kitkat with out kernel).
Similar to what Philz was releasing for GT i9100.
Reason for request. Is at moment Dorimanx kernel has older cwm. So when I flash permanent CWM kk compatible then re-flash Dori it can break 2nd ROM boot access/entry.
Therefore if possible a Temp version of what you are doing/releasing would be Perfect for my & others dualboot kitkat problems.
Thanks in advance bmad.
Click to expand...
Click to collapse
Will take a look into it:good:
@-Grift-
How much space is needed to compile a recovery in ubuntu? All, do I need trees used for building roms?
Aiko0923 said:
@-Grift-
How much space is needed to compile a recovery in ubuntu? All, do I need trees used for building roms?
Click to expand...
Click to collapse
I believe you do need the sources. From what I see you work on the Desire HD (Ace) ? Either you download the sources and compile from there or you can try Koush's CWM builder ( just search CWM builder on google ). As for source code Cm10.2 source can be upwards of 10GB easily. For the DHD im not sure if you guys have official CM11 source?
-Grift- said:
I believe you do need the sources. From what I see you work on the Desire HD (Ace) ? Either you download the sources and compile from there or you can try Koush's CWM builder ( just search CWM builder on google ). As for source code Cm10.2 source can be upwards of 10GB easily. For the DHD im not sure if you guys have official CM11 source?
Click to expand...
Click to collapse
We've got unofficial builds of cm11, and most devs have release pretty stable device and kernel trees. Thanks, 10GB isn't bad at all, but will it require me to setup my Build Environment differently?
Cwm
I'm running cwm version 5.8.1.5 and on stock rom 4.1.2. I am thinking of upgrading to 4.4.2. So can u just explain how to proceed with the recovery installation?
Okay can anyone help me? My odin 3.09 while flashing cwm 6.0.2.9 said reset instead of pass. Then phone turned off. After that I can only access download mode and it shows flash counter 2 times. Any help? Was running stock 4.1.2 rooted.
Sent from my Nexus 4
Sent from my Nexus 4
AndroidReborn said:
Okay can anyone help me? My odin 3.09 while flashing cwm 6.0.2.9 said reset instead of pass. Then phone turned off. After that I can only access download mode and it shows flash counter 2 times. Any help? Was running stock 4.1.2 rooted.
Sent from my Nexus 4
Sent from my Nexus 4
Click to expand...
Click to collapse
Flash this in odin
http://www.dorimanx.shine.sk/Androi...rimanx-V8.43-[12-21]-[24-10]-TAR-FOR-ODIN.tar
My rom is stock 4.1.2 and using cwm 6.0.1.5 but i can't flash anything include CWM 6.0.4.7 i back recovery and flash CWM 6.0.4.7 but it's error help please
Sent from my GT-i9100 by Tapatalk Pro ♠
6.0.4.8 is already out
Regards
Hello,
I have a Samsung Galaxy S2 GT-I9100p with CM12.1-20151023-NIGHTLY-i9100
I was recently on CM11 with CWM 6.0.4.3 recovery and everything worked as it should but since upgrading to CM12.1 I have been unable to boot in CWM recovery, it just takes me into the stock recovery. I've tried reflashing the CWM img but it has no effect.
Is this version of CWM not compatible with Lollipop? Can anyone tell me a version that will work?
I would also like to try TWRP but unsure which image to use, can anyone recommend one?
Thanks
Steven
caned_monkey said:
Hello,
I have a Samsung Galaxy S2 GT-I9100p with CM12.1-20151023-NIGHTLY-i9100
I was recently on CM11 with CWM 6.0.4.3 recovery and everything worked as it should but since upgrading to CM12.1 I have been unable to boot in CWM recovery, it just takes me into the stock recovery. I've tried reflashing the CWM img but it has no effect.
Is this version of CWM not compatible with Lollipop? Can anyone tell me a version that will work?
I would also like to try TWRP but unsure which image to use, can anyone recommend one?
Thanks
Steven
Click to expand...
Click to collapse
The recovery is bundled with the kernel in the S2. CM12.1 has CM recovery by default. The only way you can have a different recovery is to flash a compatible custom kernel. You could try the TWRP kernel from at the beginning of the CM12.1 thread or Dorimanx kernel that gsstudios builds
Thanks, where is the CM12.1 thread, I'm not sure which one you're referring to?
caned_monkey said:
Thanks, where is the CM12.1 thread, I'm not sure which one you're referring to?
Click to expand...
Click to collapse
This one. Under "Important information" in the first post there is a link
Thank you! Problem solved, very quick and easy to install
Hi everyone. I was read a lot off discussions about i9100 with CM12.1 but I still don't know how to do it without some problems.
My phone actually running CM13.1 latest nightly build with Team Win TWRP recovery v 2.8.XXX and maybe DorimanX kernel? I don't know how to find Kernel name and version... I would like to ask you how to go to Cm12.1 build with pico or nano GAPPS (And what build I should download). I need the most stable build for daily use. Next how to replace CM recovery with TWRP 3.0.2. . I am totally confused. I'll be glad for any help.
Oh. I have that problem too. CM 13.1 not stable!
Jaccob25 said:
Hi everyone. I was read a lot off discussions about i9100 with CM12.1 but I still don't know how to do it without some problems.
My phone actually running CM13.1 latest nightly build with Team Win TWRP recovery v 2.8.XXX and maybe DorimanX kernel? I don't know how to find Kernel name and version... I would like to ask you how to go to Cm12.1 build with pico or nano GAPPS (And what build I should download). I need the most stable build for daily use. Next how to replace CM recovery with TWRP 3.0.2. . I am totally confused. I'll be glad for any help.
Click to expand...
Click to collapse
Firstly look under settings -> about device and it will tell you the kernel version. If it says 3.0.101-CM------, you have the stock CM13 kernel. You said you have TWRP 2.8.x.x and not CM recovery?? This means you already have the isorec recovery enabled. All you need to do is flash the 3.0.2-1 .img from this recovery and you will have the newer one installed. And just do normal backup/wipes and install CM12.1 as you would any other rom. Just remember to use 5.1 gapps(arm;5.1;pico/nano)
Here is the last official CM12.1 I uploaded
Here is a more up to date unofficial CM12.1
noppy22 said:
Firstly look under settings -> about device and it will tell you the kernel version...
Click to expand...
Click to collapse
Yes I have stock cm13 kernel and TWRP flashed. Can I flash new TWRP via Odin?
Thank you very much!
Jaccob25 said:
Yes I have stock cm13 kernel and TWRP flashed. Can I flash new TWRP via Odin?
Thank you very much!
Click to expand...
Click to collapse
I don't think you can flash a .img file with odin. Honestly if you want to downgrade to 5.1.1 it would be easier to do it in one go.
Flash CM12.1, gapps, then TWRP 3.0.2-1.img all from TWRP 2.8
noppy22 said:
I don't think you can flash a .img file with odin. Honestly if you want to downgrade to 5.1.1 it would be easier to do it in one go.
Flash CM12.1, gapps, then TWRP 3.0.2-1.img all from TWRP 2.8
Click to expand...
Click to collapse
Ohh I thought that TWRP can't flash img file.
Thanks for advice. I try it today.
So I try that and almost everything works fine. Only GPS fixing seems like a little bit problematic. But I don't know my testing was short. I will see.
May I ask a supplementary question - I am in a similar position, I have an i9100 which I upgraded from stock 4.1.2 Jelly Bean to CM13 following (most of) djibe's guide here
So I now have CM13 ROM with kernel version 3.0.101, re-partitioned with Lanchons repit, and with recovery TWRP 3.1.0 installed and functioning.
I want to revert from CM13 to CM12.1. From above, I believe that I can simply backup, wipe, then flash the CM12.1 ROM (I'll be using the last nightly, cm-12.1-20160203-NIGHTLY-i9100.zip) - is that correct?
My question/confusion is, do I also need to flash an isorec-compatible kernel (ie kernel-Lanchon-TRIM-IsoRec-20160111-cm-12.1-i9100.zip)? The isorec thread (here) says that the "Official CyanogenMod 12.1 and 13 kernels are now IsoRec-compatible", so it seems to me unnecessary, but many threads/guides on XDA say to flash one of Lanchon's kernels.
Please could someone advise, and my apologies for what is probably an ignorant question.
teraghik said:
May I ask a supplementary question - I am in a similar position, I have an i9100 which I upgraded from stock 4.1.2 Jelly Bean to CM13 following (most of) djibe's guide here
So I now have CM13 ROM with kernel version 3.0.101, re-partitioned with Lanchons repit, and with recovery TWRP 3.1.0 installed and functioning.
I want to revert from CM13 to CM12.1. From above, I believe that I can simply backup, wipe, then flash the CM12.1 ROM (I'll be using the last nightly, cm-12.1-20160203-NIGHTLY-i9100.zip) - is that correct?
My question/confusion is, do I also need to flash an isorec-compatible kernel (ie kernel-Lanchon-TRIM-IsoRec-20160111-cm-12.1-i9100.zip)? The isorec thread (here) says that the "Official CyanogenMod 12.1 and 13 kernels are now IsoRec-compatible", so it seems to me unnecessary, but many threads/guides on XDA say to flash one of Lanchon's kernels.
Please could someone advise, and my apologies for what is probably an ignorant question.
Click to expand...
Click to collapse
You are correct. Isorec support was implemented before that last nightly iirc. No need to flash any kernels.
Note: Only use the official TWRP 3.1 from the TWRP website or the.gangster's one which is basically the same. They are compatible with the earlier android versions.
Hi Noppy,
Thanks very much for taking the time to reply and help - I am using "the gangsters" TWRP 3.1 from djibe's thread, appreciate the heads up. I can confirm that I flashed CM12.1, and it works fine!
Why don't you follow my tutorial to get the perfect smooth Android 7.1 for SGS2 ?
Here it is : https://forum.xda-developers.com/galaxy-s2/help/guide-tutorial-samsung-galaxy-s2-i9100-t3538601
I am using a SlimKAT rom and I am pretty happy with it, just one issue.
I want to increase the size of my /system partition, I tried flashing "lanchon-repit-20160923-system=1G-data=same-sdcard=max-preload=min+wipe-i9100.zip" but looks like I need TWRP 3 to be able to flash it, I have TWRP 2.7.*.
So I decided to flash that TWRP 3, but I need IsoRec compatible recovery, but I don't know if SlimKAT Kernel is IsoRec compatible.
Can somebody recommend any IsoRec compatible kernel for android 4.4.4?
andros705 said:
I am using a SlimKAT rom and I am pretty happy with it, just one issue.
I want to increase the size of my /system partition, I tried flashing "lanchon-repit-20160923-system=1G-data=same-sdcard=max-preload=min+wipe-i9100.zip" but looks like I need TWRP 3 to be able to flash it, I have TWRP 2.7.*.
So I decided to flash that TWRP 3, but I need IsoRec compatible recovery, but I don't know if SlimKAT Kernel is IsoRec compatible.
Can somebody recommend any IsoRec compatible kernel for android 4.4.4?
Click to expand...
Click to collapse
You could flash DorimanX 10.50 v007. It is isorec compatible
noppy22 said:
You could flash DorimanX 10.50 v007. It is isorec compatible
Click to expand...
Click to collapse
And i may add another one:
https://www.androidfilehost.com/?fid=24369303960683575
Sent from my ME173X using XDA-Developers mobile app
So I tried flashing DorimanX kernel and then twrp-3.0.2-1-i9100 using heimdall suite but I still have a "CWM-based Recovery" powered by DorimanX Kernel ??? Nothing changed?
About the "kernel-Lanchon-TRIM-IsoRec-20160112-cm-11-i9100.zip" kernel, how can I make sure that my phone don't have this bugged chip or something? I don't know if I should flash it or not.
andros705 said:
So I tried flashing DorimanX kernel and then twrp-3.0.2-1-i9100 using heimdall suite but I still have a "CWM-based Recovery" powered by DorimanX Kernel ??? Nothing changed?
About the "kernel-Lanchon-TRIM-IsoRec-20160112-cm-11-i9100.zip" kernel, how can I make sure that my phone don't have this bugged chip or something? I don't know if I should flash it or not.
Click to expand...
Click to collapse
Hi
If you want to be on safe side:
Flash latest cm11 20161119 rom by zjq985062714 ( has isorec kernel) and this twrp 3 zip:
http://forum.xda-developers.com/showthread.php?p=69511483
No need to use heimdall. Just flash all zips in present recovery .
Then Flash in twrp the lanchon repartition zip.
Then you can flash any rom up to cm14.
If you want your previous slimkat then install it again. keep in mind you will then have old recovery as twrp will only show up when beeing On isorec-kernel.
(But twrp will remain on device)
Sent from my ME173X using XDA-Developers mobile app
---------- Post added at 07:26 AM ---------- Previous post was at 07:22 AM ----------
Just want to add
I would flash lanchon repit 1.0 GB system and 4.0 GB data for beeing able to flash any rom up to cm14
Sent from my ME173X using XDA-Developers mobile app
Thanks @TriboDoP that worked!
andros705 said:
Thanks @TriboDoP that worked!
Click to expand...
Click to collapse
I am late but it is nice to see you got it done.
Just for couriosity: did you go back to your old rom or did you try any MM or even Nougat?
Regards
TriboDoP
Sent from my STAIRWAY using XDA-Developers Legacy app
Follow my tutorial to get IsoRec recovery with Isorec Kernel, withoud Odin.
Reformat is explained step by step.
https://forum.xda-developers.com/galaxy-s2/help/guide-tutorial-samsung-galaxy-s2-i9100-t3538601
Have a good reading
Hey XDA-Community
I sent my phone to oneplus for repairing it. They wrote that as solution for my problem (speakers didn't work) they just replaced the mainboard. But now I'm unable to install TWRP persistently. After every reboot I get the stock recovery. Furthermore if I'm in TWRP wich I just booted from fastboot I can't install anything. If I want to flash SuperSu it says errors like: "Unable to find partition size for '/boot'" (also other partitions like '/recovery', '/misc'...) then in the console the folowing error gets displayed: "Unable to mount '/data' (Invalid argument)" this continues with all the other partitions, and then (obviously) SuperSU doesn't get installed. I have attached a screentshot about my phone info. Do you have any idea how I can fix this? Do you need any further information? Feel free to ask.
Maybe this thread is helpful: https://forum.xda-developers.com/on...official-twrp-arsenic-kernel-oneplus-t3573644
It's for E1003_15
Tagion said:
Maybe this thread is helpful: https://forum.xda-developers.com/on...official-twrp-arsenic-kernel-oneplus-t3573644
It's for E1003_15
Click to expand...
Click to collapse
well TWRP does work, but I can't boot into android now do you know where I can find a compatible ROM for Oneplux X E1003 with arsenic kernel. I really searched everywhere, but haven't found anything
TheAustrian1337 said:
well TWRP does work, but I can't boot into android now do you know where I can find a compatible ROM for Oneplux X E1003 with arsenic kernel. I really searched everywhere, but haven't found anything
Click to expand...
Click to collapse
Did you flashed Arsenic Kernel (from the thread I sent) with the ROM?
Which version of oos was installed?
Samarth_17 said:
Which version of oos was installed?
Click to expand...
Click to collapse
It was version 3.1.4
Tagion said:
Did you flashed Arsenic Kernel (from the thread I sent) with the ROM?
Click to expand...
Click to collapse
Yeah I also flashed that one, should I undo this step? Like just wiping everything
TheAustrian1337 said:
Yeah I also flashed that one, should I undo this step? Like just wiping everything
Click to expand...
Click to collapse
Just follow the instructions
Tagion said:
Just follow the instructions
Click to expand...
Click to collapse
I did that (I hope a least) but the ROM just shows it's boot screen. The ROM I used is that one: https://forum.xda-developers.com/oneplus-x/development/rom-xperience-11-1-t3507588 do you think I should try the official ROM: http://downloads.oneplus.net/oneplus-x/oneplus_x_oxygenos_3.1.4/
TheAustrian1337 said:
Hey XDA-Community
I sent my phone to oneplus for repairing it. They wrote that as solution for my problem (speakers didn't work) they just replaced the mainboard. But now I'm unable to install TWRP persistently. After every reboot I get the stock recovery. Furthermore if I'm in TWRP wich I just booted from fastboot I can't install anything. If I want to flash SuperSu it says errors like: "Unable to find partition size for '/boot'" (also other partitions like '/recovery', '/misc'...) then in the console the folowing error gets displayed: "Unable to mount '/data' (Invalid argument)" this continues with all the other partitions, and then (obviously) SuperSU doesn't get installed. I have attached a screentshot about my phone info. Do you have any idea how I can fix this? Do you need any further information? Feel free to ask.
Click to expand...
Click to collapse
TWRP: https://forum.xda-developers.com/oneplus-x/orig-development/recovery-twrp-r1-03-05-t3600887
ROM (pick any): https://forum.xda-developers.com/oneplus-x/development/roms-ground-zero-roms-validus-tesla-t3546588
Kernel: https://www.arsenic-kernel.download
Flash the latest kernel along with zip, Tesla already has R46 which will work on your repaired device.
CheckYourScreen said:
TWRP: https://forum.xda-developers.com/oneplus-x/orig-development/recovery-twrp-r1-03-05-t3600887
ROM (pick any): https://forum.xda-developers.com/oneplus-x/development/roms-ground-zero-roms-validus-tesla-t3546588
Kernel: https://www.arsenic-kernel.download
Flash the latest kernel along with zip, Tesla already has R46 which will work on your repaired device.
Click to expand...
Click to collapse
I did that, and tried it for a few days. But unfortunately most of my Apps crash all the time, or after a few minutes. Sometimes I cant, lock or unlock my screen and root with SUperSU just disapperes sometimes Sadly this custom rom is very unstable. Is there maybe ANY way I cold just flash the Android 6 stock ROM on it and root it with anything? I really don't care what I have to do for rooting it, but this ROM is just too buggy... but it looks nice, and having Android 7 is also ver cool:fingers-crossed::good:
TheAustrian1337 said:
I did that, and tried it for a few days. But unfortunately most of my Apps crash all the time, or after a few minutes. Sometimes I cant, lock or unlock my screen and root with SUperSU just disapperes sometimes Sadly this custom rom is very unstable. Is there maybe ANY way I cold just flash the Android 6 stock ROM on it and root it with anything? I really don't care what I have to do for rooting it, but this ROM is just too buggy... but it looks nice, and having Android 7 is also ver cool:fingers-crossed::good:
Click to expand...
Click to collapse
Check inbox, I've sent you link of AOSP-JDC rom.
I haven't released it yet so can share it here in post, though its publicly available on my androidfilehost account.
Try it once.
CheckYourScreen said:
Check inbox, I've sent you link of AOSP-JDC rom.
I haven't released it yet so can share it here in post, though its publicly available on my androidfilehost account.
Try it once.
Click to expand...
Click to collapse
I found and installed your rom, works very well. I hope you will continue to update this rom
CheckYourScreen said:
TWRP: https://forum.xda-developers.com/oneplus-x/orig-development/recovery-twrp-r1-03-05-t3600887
ROM (pick any): https://forum.xda-developers.com/oneplus-x/development/roms-ground-zero-roms-validus-tesla-t3546588
Kernel: https://www.arsenic-kernel.download
Flash the latest kernel along with zip, Tesla already has R46 which will work on your repaired device.
Click to expand...
Click to collapse
I have the same build number as OP (E1003_15_161107). Phone is untouched and on stock ROM. Read things about our devices being different than others and hence little to no ROM support. So I am a bit lost. I reckon recovery provided by you works well on our device. What about the ROMs ? Can I flash any of my choice ? And Kernels ? Can I opt for kernels other than Arsenic ? (Big fan of Franco. Using his kernel on my OPO)
Ruvy said:
I have the same build number as OP (E1003_15_161107). Phone is untouched and on stock ROM. Read things about our devices being different than others and hence little to no ROM support. So I am a bit lost. I reckon recovery provided by you works well on our device. What about the ROMs ? Can I flash any of my choice ? And Kernels ? Can I opt for kernels other than Arsenic ? (Big fan of Franco. Using his kernel on my OPO)
Click to expand...
Click to collapse
Yes you can flash any rom of your choice, just make sure you flash Arsenic R46 along with the rom zip as kernel is what makes your device boot. I'm not sure about franco's kernel so better ask in his respective thread?
No Luck for me.
Version 3.2.1-0 not work here.
BUILD E1003_15, i have to use this Version to get a ROM work.
https://forum.xda-developers.com/on...official-twrp-arsenic-kernel-oneplus-t3573644
Is there be a fix for my Version of the OPX ?
Regards