Related
Q&A for [APOLLO/RECOVERY LOCKED] Safestrap Recovery v3.72/v3.75 [B02 2014-07-03]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [APOLLO/RECOVERY LOCKED] Safestrap Recovery v3.72/v3.75 [B02 2014-07-03]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Fire HDX 8.9 vs Kindle Fire HDX 8.9
Okay, so I have noticed that Hashcode built this for both the 7" and 8.9" versions of the Kindle Fire HDX, but does the 8.9" version here: http://forum.xda-developers.com/showthread.php?t=2612772
Does this support the 3rd generation Fire HDX 8.9" version? I noticed that the download links say it supports systems earlier than 14.3.2.1 and later than 14.3.2.1, but does it support the newer Fire HDX 8.9" system 4.1.1? Judging from what I have researched, I believe that there isn't much difference between 14.3.2.1 and 4.1.1. Has anyone tried to root or install CM on this newest version of the HDX 8.9 yet?
Thanks in advance.
WickdWzrd said:
Okay, so I have noticed that Hashcode built this for both the 7" and 8.9" versions of the Kindle Fire HDX, but does the 8.9" version here: http://forum.xda-developers.com/showthread.php?t=2612772
Does this support the 3rd generation Fire HDX 8.9" version? I noticed that the download links say it supports systems earlier than 14.3.2.1 and later than 14.3.2.1, but does it support the newer Fire HDX 8.9" system 4.1.1? Judging from what I have researched, I believe that there isn't much difference between 14.3.2.1 and 4.1.1. Has anyone tried to root or install CM on this newest version of the HDX 8.9 yet?
Thanks in advance.
Click to expand...
Click to collapse
No, it's not possible to mod FireOS 4 in any way.
Safestrap apk for Kindle Fire HDX 14.3.2.3.2
Hi I'm trying to install safestrap on my kfhdx, but all the links in the forums seem to be broken. Any suggestions on where I can find this download? Thanks a lot
j1mbo83 said:
Hi I'm trying to install safestrap on my kfhdx, but all the links in the forums seem to be broken. Any suggestions on where I can find this download? Thanks a lot
Click to expand...
Click to collapse
Available here.
Although I'm not sure why you want to install safestrap as the firmware version you are running (self reported as 14.3.2.3.2) permits flashing 'native' twrp which is far more robust. From there you can flash CM11 or Nexus 2.0.5. With a bit of work you can also unlock your bootloader which opens the door to CM12 and Nexus 4.x. None of these roms work with safestrap.
Safestrap is a primary used by those who cannot flash 'native' twrp (most newer Kindles) and/or if you wish to toggle between Fire OS and Nexus 1.01. Those are the only roms that work with safestrap. Also note you must take steps to block OTA while using Safestrap or risk bricking your device. At present the only method that works reliably is HDX toolkit.
Thanks for the reply, I'm obviously new to this but I've rooted my Kindle, installed Google play, but recently Google has been forcing updates of play services and I'm afraid to mess with anything else until I can either unlock bootloader it install custom recovery, if you could point me in the right direction on how to do this I'd appreciate it. Didn't know I could install twrp. Any directions in layman's terms would help, thanks.
j1mbo83 said:
Thanks for the reply, I'm obviously new to this but I've rooted my Kindle, installed Google play, but recently Google has been forcing updates of play services and I'm afraid to mess with anything else until I can either unlock bootloader it install custom recovery, if you could point me in the right direction on how to do this I'd appreciate it. Didn't know I could install twrp. Any directions in layman's terms would help, thanks.
Click to expand...
Click to collapse
Installing a custom recovery (twrp) is straight forward given your version of Fire OS. Please confirm you really are on v14.3.2.3.2 and OTA (over-the-air) updates have been blocked and if so, via which method. Did you roll your device back from a higher firmware version? Sorry for all the questions - want to make sure the foundation is solid before taking next steps.
Outline to install custom recovery:
- side load Flashify (here). You can also find/install this from Play Store if working on your device.
- download custom twrp (here); you want Apollo v2.8.6.0
- use Flashify to backup your current recovery (don't skip this step)
- use Flashify to flash (install) the twrp recovery image previously downloaded. You must use this image; don't go downloading/flashing a generic version!
When complete you device will reboot back into Fire OS as if nothing changed. You can verify twrp was correctly installed by powering down and then restarting by pressing power + vol-up. Release the power button when the grey Kindle logo appears; release the vol-up button a few seconds alter. After a few moments a blue logo should appear and you will enter twrp recovery. Have a look around but don't change anything. Reboot you device and post back for further instructions (actually information on next steps; where the fun begins!) .
Be aware that any type of flashing can render your device unusable. The steps outlined above are relatively safe if you follow directions carefully and double check each action before executing. Ask questions in advance; don't panic and start doing unscripted stuff if something goes wrong.
I am running v14.3.2.3.2, I rooted the kindle and blocked OTA updates using hdx toolkit. I did this maybe about 7 months ago and never rolled back. Will these directions still work for me?
j1mbo83 said:
I am running v14.3.2.3.2, I rooted the kindle and blocked OTA updates using hdx toolkit. I did this maybe about 7 months ago and never rolled back. Will these directions still work for me?
Click to expand...
Click to collapse
Looks good. Just go slow and double check each step. Once twrp is installed and confirmed working you can then flash either the Nexus or CM11 rom which will give you unfettered access to the Play store and all the goodness of a 'generic' android device. Effectively your Kindle looses its identity as an Amazon tablet. Nexus (what I use) has proven rock solid but is getting a bit long in the tooth. CM11 is based on KitKat and only has a minor issues with bluetooth, LTE and occasionally wifi. Most users of this rom are quite happy and can easily work around the issues.
Prior to flashing a new rom you should make a complete backup of your current system in twrp and then store that image on another device. Also keep in mind that once you flash twrp it is very difficult to restore your device to full 'stock'. Assume a one way trip.
Edit: Forgot to mention LTE. At present none of the roms support LTE but that will likely change in the near future. If you have an LTE enabled tablet you'll have to decide if that or play store access is more important.
Thanks. Ok I installed flashify, then followed your link to download and install twrp and it has a note at the top that says to unlock boot loader. I don't think it is unlocked. How do I check this? And if it isn't, how would I go about unlocking it?
---------- Post added at 09:00 PM ---------- Previous post was at 08:11 PM ----------
Ok I successfully installed twrp, created a backup, and saved it to another device. Ready for the next step. Thanks for all your help.
Congrats. If you are asking how to know if you are unlocked, chances are good it is locked. You do not need to unlock the bootloader, but it is highly recommended as once successfully unlocked it is another failsafe, and opens up other roms (like cm 12). To unlock it, I suggest grabbing Draxie's automated (slightly) script from the original dev section. Know that the act of unlocking the bootloader is difficult, and will require you to learn more about your device, but it does pay off in the end.
j1mbo83 said:
Thanks. Ok I installed flashify, then followed your link to download and install twrp and it has a note at the top that says to unlock boot loader. I don't think it is unlocked. How do I check this? And if it isn't, how would I go about unlocking it?
---------- Post added at 09:00 PM ---------- Previous post was at 08:11 PM ----------
Ok I successfully installed twrp, created a backup, and saved it to another device. Ready for the next step. Thanks for all your help.
Click to expand...
Click to collapse
Congrats!! See post from lekofraggle (here) which I fully agree with. However, I think you can defer the bootloader unlock for a little while recognizing that it provides an important failsafe should you bork your device and is a prerequisite for some roms (eg: CM12).
Next step involves flashing a rom of your choice. Recognize all aps/data will be wiped; you'll be starting clean. However, anything previously purchased in the play store can be downloaded again assuming you use the same credentials when setting up accounts on the 'new' rom.
Choices:
- Nexus 2.0.5: JellyBean based, rock solid, near AOSP (unmodified Android). Info/links here.
- CM11: KitKat based, popular across numerous Android devices with useful extensions baked in. Some minor BT/WiFi flakiness on HDX devices. Info/links here.
Both roms can also be downloaded using the ROMs tab at the top of this page. Don't go trying anything else. You want HDX Nexus or CM11-Apollo. Magic Beans will also work but carries no significant advantage over the other two and hasn't see much development in recent months.
All ROMs can be flashed from twrp. Be sure to make a backup of your current environment first. Use caution in twrp if you are new to the tool; it's easy to mess things up including a full brick of your device.
I recommend you start with Nexus. It's a great rom that will serve you well; an upgrade (KitKat) is in the works and should be released in the not-too-distant future. CM11 is also a fine choice and offers greater compatibility with some of the more recent app releases. Both are further customizable via Xposed Framework but that's another discussion.
Ok thanks, I downloaded the zips, now I have just one more question (I know, I have a lot...). Do I need to wipe my system before installing new Rom?
j1mbo83 said:
Ok thanks, I downloaded the zips, now I have just one more question (I know, I have a lot...). Do I need to wipe my system before installing new Rom?
Click to expand...
Click to collapse
Keep asking! Lots of devices have died in the hands of ignorant users (not intended to be an insult...were are all ignorant until educated).
In theory you do not need to wipe the device but there have been scattered reports of strange behaviors after performing a 'dirty' flash. My recommendation is to perform a factory reset (under wipe) from within twrp. This will clear data, cache and dalvik while leaving system and internal storage intact. If you opt for an "advanced wipe" select the previous 3 plus system; leave internal storage alone. Do not format or repair; just asking for trouble.
As always make a backup before proceeding and store a copy of that off-device. Short term keep a copy on the device along with the rom image just in case you have to redo something and can't connect via tether. Rare but it does happen.
Hello,
I'm hoping that someone can help me out with this.
Last December i bought a Fire HDX 7 (Thor). I immediatley followed the procedure to install Safestrap and the Thor Nexus ROM v2.0.1. Shortly after that my device got lost. Just last week I found it because my parents moved. After this I started looking around the internet to check if there are any 5.0 or 5.1 ROMs available. I found out they are indeed available.
What I want to do now is get rid of Safestrap, unlock the bootloader and install TWRP to be able to flash new ROMs. I want to start using TWRP because I'm used to working with TWRP.
The problem is that I can't seem to find a way to get this done, despite searching for it on this page for several hours. Can anyone help me on the right track? Would be very much appreciated.
Timmetjuh said:
Hello,
I'm hoping that someone can help me out with this.
Last December i bought a Fire HDX 7 (Thor). I immediatley followed the procedure to install Safestrap and the Thor Nexus ROM v2.0.1. Shortly after that my device got lost. Just last week I found it because my parents moved. After this I started looking around the internet to check if there are any 5.0 or 5.1 ROMs available. I found out they are indeed available.
What I want to do now is get rid of Safestrap, unlock the bootloader and install TWRP to be able to flash new ROMs. I want to start using TWRP because I'm used to working with TWRP.
The problem is that I can't seem to find a way to get this done, despite searching for it on this page for several hours. Can anyone help me on the right track? Would be very much appreciated.
Click to expand...
Click to collapse
Your options are determined by the current version of Amazon firmware installed on your device. I assume you retained Fire OS in the base slot. Boot into that and poke around settings until you find the version number (should be 13.x.x plus some other gibberish). Post what you find and we'll go from there.
Caution: You should disable wifi immediately after booting into Fire OS to prevent an automatic update from Amazon from spoiling your day. At minimum an update will limit future options. I can also brick your device depending on firmware level and other previous mods (including safestrap). Disabling wifi in Nexus is not sufficient as the two roms operate independently.
Davey126 said:
Your options are determined by the current version of Amazon firmware installed on your device. I assume you retained Fire OS in the base slot. Boot into that and poke around settings until you find the version number (should be 13.x.x plus some other gibberish). Post what you find and we'll go from there.
Caution: You should disable wifi immediately after booting into Fire OS to prevent an automatic update from Amazon from spoiling your day. At minimum an update will limit future options. I can also brick your device depending on firmware level and other previous mods (including safestrap). Disabling wifi in Nexus is not sufficient as the two roms operate independently.
Click to expand...
Click to collapse
Could it be that I somehow deleted the Fire OS back then? Don't really remeber what I did exactly..
Timmetjuh said:
Could it be that I somehow deleted the Fire OS back then? Don't really remeber what I did exactly..
Click to expand...
Click to collapse
Quite possibly. Enjoy Nexus; it's a good rom. Alternatively, follow the directions to see if you still have Fire OS installed. If at/below v3.2.6 then Lollipop is possible albeit with a lot of work and significant risk to your device. Otherwise you are limited to Fire OS and Nexus.
Seriously, if you don't recall what you did and can't figure out how start Safestrap in recovery mode be happy with what you have. There are no step-by-step guides. You have to read (a lot) and be prepared for numerous setbacks including an unrecoverable brick of your now working Kindle.
Davey126 said:
Quite possibly. Enjoy Nexus; it's a good rom. Alternatively, follow the directions to see if you still have Fire OS installed. If at/below v3.2.6 then Lollipop is possible albeit with a lot of work and significant risk to your device. Otherwise you are limited to Fire OS and Nexus.
Seriously, if you don't recall what you did and can't figure out how start Safestrap in recovery mode be happy with what you have. There are no step-by-step guides. You have to read (a lot) and be prepared for numerous setbacks including an unrecoverable brick of your now working Kindle.
Click to expand...
Click to collapse
Sorry for my late response.. I just started Safestrap and can only find 1 ROM slot, the Stock ROM slot which probably means that I deleted the original OS.
I did find some files on my laptop that brought some memories back. What I did back then is downgrade the original software to version 13.3.2.6 and than to 13.3.1.0. Does this create any new possibilities?
I just managed to create a new ROM slot and succesfully installed stock 13.3.2.6 on it, so now running on Nexus ROM and stock 13.3.2.6.
Timmetjuh said:
Sorry for my late response.. I just started Safestrap and can only find 1 ROM slot, the Stock ROM slot which probably means that I deleted the original OS.
I did find some files on my laptop that brought some memories back. What I did back then is downgrade the original software to version 13.3.2.6 and than to 13.3.1.0. Does this create any new possibilities?
Click to expand...
Click to collapse
Timmetjuh said:
I just managed to create a new ROM slot and succesfully installed stock 13.3.2.6 on it, so now running on Nexus ROM and stock 13.3.2.6.
Click to expand...
Click to collapse
Warning: Do NOT allow Fire OS to auto-update. Doing so will likely brick your device. Short term the best way to prevent this is to only boot into Nexus. If necessary I can walk you through blocking OTA. Seriously - stay out of Fire OS for now.
I am no Safestrap expert but I believe the rom in the 'base' slot becomes the default when you uninstall Safestrap. So you may have some shuffling to do. Another concern is whether removing/reinstalling Fire OS will impact the ability to recognize the OS once Safetrap is gone. You need a functioning version of Fire OS (and recovery) to follow the 'standard' rollback/update/flash procedures.
However, there may be a shortcut. If 13.3.1.0 was the base rom just prior to installing Nexus and wiping out Fire OS you then should be able to flash twrp without further prep. That would give you access to both Nexus variants and CM11. Unfortunately, there is no easy way to determine the bootloader version which is the component that really matters. It should match the last version of Fire OS that was natively installed before you overwrite it with Nexus.
Unfortunately, the recent install of 13.3.2.6 into a safestrap slot complicates matters. I believe installs within Safestrap leaves the bootloader untouched. But I can't be sure. A misstep can leave your device in an unrecoverable condition; don't go experimenting.
Let's see which recovery you have installed. Power down the device then restart holding power + vol-up. When the grey Kindle logo appears release the power key; vol-up can be released a few seconds later. What happens after the grey logo disappears?
Davey126 said:
Warning: Do NOT allow Fire OS to auto-update. Doing so will likely brick your device. Short term the best way to prevent this is to only boot into Nexus. If necessary I can walk you through blocking OTA. Seriously - stay out of Fire OS for now.
I am no Safestrap expert but I believe the rom in the 'base' slot becomes the default when you uninstall Safestrap. So you may have some shuffling to do. Another concern is whether removing/reinstalling Fire OS will impact the ability to recognize the OS once Safetrap is gone. You need a functioning version of Fire OS (and recovery) to follow the 'standard' rollback/update/flash procedures.
However, there may be a shortcut. If 13.3.1.0 was the base rom just prior to installing Nexus and wiping out Fire OS you then should be able to flash twrp without further prep. That would give you access to both Nexus variants and CM11. Unfortunately, there is no easy way to determine the bootloader version which is the component that really matters. It should match the last version of Fire OS that was natively installed before you overwrite it with Nexus.
Unfortunately, the recent install of 13.3.2.6 into a safestrap slot complicates matters. I believe installs within Safestrap leaves the bootloader untouched. But I can't be sure. A misstep can leave your device in an unrecoverable condition; don't go experimenting.
Let's see which recovery you have installed. Power down the device then restart holding power + vol-up. When the grey Kindle logo appears release the power key; vol-up can be released a few seconds later. What happens after the grey logo disappears?
Click to expand...
Click to collapse
I see the following:
Kindle Fire System Recovery
Your Kindle doesn't seem to be able to boot. Resetting your device to Factory defaults may help you to fix this issue.
Then I get the options to Reboot or to reset to Factory Default.
Oh, the Fire OS is not connected to any networks so it won't be able to update.
Timmetjuh said:
I see the following:
Kindle Fire System Recovery
Your Kindle doesn't seem to be able to boot. Resetting your device to Factory defaults may help you to fix this issue.
Then I get the options to Reboot or to reset to Factory Default.
Oh, the Fire OS is not connected to any networks so it won't be able to update.
Click to expand...
Click to collapse
Ok - a working stock recovery. That's good.
I am conflicted on next steps. The scripted approach would have you uninstall Safestrap (assuming Fire OS had remained in slot 0), rollback to 3.1.0 and then install twrp. However, since slot 0 now contains Nexus I do not feel removing Safestrap is wise. Nor to I think reinstalling Fire OS in the base slow will yield a functioning system once Safestrap is gone.
The 'shortcut' would have you flash twrp recovery (via adb or Flashify) since your bootloader *should*_be at the right level due to a previous 3.1.0 rollback. However, if that is not correct you will end up with a borked recovery which is difficult to rectify.
In your shoes I would probably do nothing given the device is fully functional. The developer of the Nexus rom is working on a KitKat 'upgrade' which is close to being released; a Safestrap variant will hopefully follow. There's no shame in running Nexus. Upgrade to v4.4, add a few Xposed modules and you have fully supported, near AOSP environment that's only lacking a few eye candy elements from Lollipop.
Davey126 said:
Ok - a working stock recovery. That's good.
I am conflicted on next steps. The scripted approach would have you uninstall Safestrap (assuming Fire OS had remained in slot 0), rollback to 3.1.0 and then install twrp. However, since slot 0 now contains Nexus I do not feel removing Safestrap is wise. Nor to I think reinstalling Fire OS in the base slow will yield a functioning system once Safestrap is gone.
The 'shortcut' would have you flash twrp recovery (via adb or Flashify) since your bootloader *should*_be at the right level due to a previous 3.1.0 rollback. However, if that is not correct you will end up with a borked recovery which is difficult to rectify.
In your shoes I would probably do nothing given the device is fully functional. The developer of the Nexus rom is working on a KitKat 'upgrade' which is close to being released; a Safestrap variant will hopefully follow. There's no shame in running Nexus. Upgrade to v4.4, add a few Xposed modules and you have fully supported, near AOSP environment that's only lacking a few eye candy elements from Lollipop.
Click to expand...
Click to collapse
It's not that I don't like the Nexus ROM, I just like to experiment with these things..
So I just installed TWRP with Flashify (started Flashify from NEXUS) and now I seem stuck at the grey Kindle fire logo. I'm just going to leave it alone for a few hours, hopefully it boots later today.
Davey126 said:
Ok - a working stock recovery. That's good.
I am conflicted on next steps. The scripted approach would have you uninstall Safestrap (assuming Fire OS had remained in slot 0), rollback to 3.1.0 and then install twrp. However, since slot 0 now contains Nexus I do not feel removing Safestrap is wise. Nor to I think reinstalling Fire OS in the base slow will yield a functioning system once Safestrap is gone.
The 'shortcut' would have you flash twrp recovery (via adb or Flashify) since your bootloader *should*_be at the right level due to a previous 3.1.0 rollback. However, if that is not correct you will end up with a borked recovery which is difficult to rectify.
In your shoes I would probably do nothing given the device is fully functional. The developer of the Nexus rom is working on a KitKat 'upgrade' which is close to being released; a Safestrap variant will hopefully follow. There's no shame in running Nexus. Upgrade to v4.4, add a few Xposed modules and you have fully supported, near AOSP environment that's only lacking a few eye candy elements from Lollipop.
Click to expand...
Click to collapse
It still boots after a very long time, however I don't know if I get the possibility to enter recovery because it takes several hours to boot. Any more ideas?
Timmetjuh said:
It still boots after a very long time, however I don't know if I get the possibility to enter recovery because it takes several hours to boot. Any more ideas?
Click to expand...
Click to collapse
Power down device and attempt to enter recovery by pressing power + vol-up. Release the power button after the grey logo appears; vol-up can be released after a few seconds. What happens next? Likely one of the following (good -> bad):
- blue screen followed by twrp recovery
- stock recovery with only two options: factory reset and reboot
- continuation of grey kindle logo
Davey126 said:
Power down device and attempt to enter recovery by pressing power + vol-up. Release the power button after the grey logo appears; vol-up can be released after a few seconds. What happens next? Likely one of the following (good -> bad):
- blue screen followed by twrp recovery
- stock recovery with only two options: factory reset and reboot
- continuation of grey kindle logo
Click to expand...
Click to collapse
I'm stuck at the grey Kindle logo..
Did it! Managed to flash the stock bootloader, rollback and install TWRP. Now ready to flash CM11. Thanks for you help!
Timmetjuh said:
Did it! Managed to flash the stock bootloader, rollback and install TWRP. Now ready to flash CM11. Thanks for you help!
Click to expand...
Click to collapse
Congrats! Had a bad feeling after your earlier post; glad that was misplaced. Enjoy CM11 and all the goodness that comes from a liberated HDX.
At some point you should consider unlocking the bootloader. That will provide an important fail safe should things go wrong and opens the door to newer roms. Unlike previous flashes there is little/no risk in unlocking. It will either work or not with no adverse consequences. Unlocking can be a frustrating ride as the process involves multiple steps in unfamiliar territory but ultimately the benefits outweigh the effort IMO. Nothing that needs to be tackled right away but keep it on your radar ... especially if you plan to experiment with other roms.
Unlock bootloader
Hello davey,
I am also interested in getting from safestrap v4 to an unlocked bootloader in order to use a lollipop ROM. My 3rd gen hdx 7 started on 4.5.5 so I did OTA rollback to 3.2.8, upgraded to 4.5.2, then rooted and safestrapped. Unfortunately I lost my stock ROM, but I current have both CM11 and HDZ nexus v4 on 2 different ROM slots. What would be my best way to proceed? From my research so far, it would appear I need to flash hdx nexus 2.0, then flash rollback image to get to modified 3.2.4, and from there 3.1.0 stock update with will allow me to use python method to unlock BL. Is this all correct?
Thanks in advance for your guidance
slothdabski said:
Hello davey,
I am also interested in getting from safestrap v4 to an unlocked bootloader in order to use a lollipop ROM. My 3rd gen hdx 7 started on 4.5.5 so I did OTA rollback to 3.2.8, upgraded to 4.5.2, then rooted and safestrapped. Unfortunately I lost my stock ROM, but I current have both CM11 and HDZ nexus v4 on 2 different ROM slots. What would be my best way to proceed? From my research so far, it would appear I need to flash hdx nexus 2.0, then flash rollback image to get to modified 3.2.4, and from there 3.1.0 stock update with will allow me to use python method to unlock BL. Is this all correct?
Thanks in advance for your guidance
Click to expand...
Click to collapse
No. You can NOT unlock the bootloader! You can NOT downgrade to 3.2.4 and then further to 3.1.0/3.2.3.2! DON'T attempt to do so, you will brick your HDX!
Your only available option is to stay on 4.5.2 and use Safestrap v4 with either Nexus and/or CM11.
slothdabski said:
Hello davey,
I am also interested in getting from safestrap v4 to an unlocked bootloader in order to use a lollipop ROM. My 3rd gen hdx 7 started on 4.5.5 so I did OTA rollback to 3.2.8, upgraded to 4.5.2, then rooted and safestrapped. Unfortunately I lost my stock ROM, but I current have both CM11 and HDZ nexus v4 on 2 different ROM slots. What would be my best way to proceed? From my research so far, it would appear I need to flash hdx nexus 2.0, then flash rollback image to get to modified 3.2.4, and from there 3.1.0 stock update with will allow me to use python method to unlock BL. Is this all correct?
Thanks in advance for your guidance
Click to expand...
Click to collapse
Unfortunately, you can not unlock your bootloader. Amazon introduced anti-rollback protection that will hard brick the device if rolled back below 3.2.8. Sorry, mate.
Davey126 said:
Unfortunately, you can not unlock your bootloader. Amazon introduced anti-rollback protection that will hard brick the device if rolled back below 3.2.8. Sorry, mate.
Click to expand...
Click to collapse
Thanks Davey, you have been very helpful replying to me in another thread also. My reason for seeking a ROM other, than Nexus v4 or CM11, is the kitkat bluetooth tether/VPN bug documented at code.google.com/p/android/issues/detail?id=62714 (sorry for no direct link, xda won't let me post them yet). A "work around" is to establish a wifi connection, even if it doesnt have internet access. This, for whatever reason, allows kitkat to forward the packets to apps on the kindle. I probably could get away with plugging in an old access point at work to enable the sharing sharing of my phones data connection with my safestrap kitkit kindle, but this isn't practical outside of my workplace.
FYI, I cant share my phone's connection via wifi because its an ATT note 4 with lollipop, a locked bootloader, and no permaroot available. I doubt there's a way to tether between 2 android devices via microUSB; but i'd be open to that too!
Thanks again for your wisdom and expertise!
slothdabski said:
Thanks Davey, you have been very helpful replying to me in another thread also. My reason for seeking a ROM other, than Nexus v4 or CM11, is the kitkat bluetooth tether/VPN bug documented at code.google.com/p/android/issues/detail?id=62714 (sorry for no direct link, xda won't let me post them yet). A "work around" is to establish a wifi connection, even if it doesnt have internet access. This, for whatever reason, allows kitkat to forward the packets to apps on the kindle. I probably could get away with plugging in an old access point at work to enable the sharing sharing of my phones data connection with my safestrap kitkit kindle, but this isn't practical outside of my workplace.
FYI, I cant share my phone's connection via wifi because its an ATT note 4 with lollipop, a locked bootloader, and no permaroot available. I doubt there's a way to tether between 2 android devices via microUSB; but i'd be open to that too!
Thanks again for your wisdom and expertise!
Click to expand...
Click to collapse
I actually just got it working by running the following as SU in terminal emaulator
# ip route add default dev tun0 scope link
Not sure yet if I have to do this every time I tether, but if so, i think i can just make a script to execute automatically?
Actually i am not an experienced person, Just get some help from youtube and this forum & rooted my Kindle fire HDX 7 using KFHDX toolkit to install google apps. Its perfectly done and i download number of apps. Then i tried to install Kitkat (thor) on it. During all this activity i go to recovery option and press the Wipe button "Cache and Dalvik Cache". after that my Kindle fire HDX 7 boot and stuck on Kindle fire starting Grey logo. I tried to factory reset but still keep stuck on start logo. While connected to PC, only hear one connectivity beep with PC but no device shows in my computer. Tried many trouble shoot find on google and this forum but issue still there. Please assist any solution. As already mentioned that i am not an experienced person. So please assist step by step.. Thanks in advance
How did you flash the ROM? Did you already have TWRP installed?
Also, do you have adb running? Do you know what version of the kindle os you had before flashing the Rom?
I had installed android 4.2.2 (thor) before and had installed TWRP. I flashed new rom 4.0.1 through TWRP and then immediately Nexus gapps v2.1. After that tablet stuck in grey logo. Unfortunately I haven't running abd now.
tishotch said:
I had installed android 4.2.2 (thor) before and had installed TWRP. I flashed new rom 4.0.1 through TWRP and then immediately Nexus gapps v2.1. After that tablet stuck in grey logo. Unfortunately I haven't running abd now.
Click to expand...
Click to collapse
With a vocubulary that includes 'flash' and 'twrp' it would appear you are more experienced than the average Kindle owner . However, you didn't read the cautions/prerequisites for installing 4.0.1. Bootloader must be unlocked (here). Not easy/intuitive but if you get through it 4.0.1 will boot just fine.
You can reflash Nexus v2 to restore functionality while working on the bootloader unlock. Our simply restore your system from the backup you made before flashing 4.0.1. To access TWRP directly press power and vol-up from a cold start. Release the power button when the grey logo appears; vol-up can be release a few seconds later.
Caveat: I assume you are not referencing the Safestrap variant of twrp. If that's the case then you are in a whole 'nother world of hurt ...
When I press power and vol-up from a cold start, It open only stock recovery (not TWRP). After reset to factory ( second options)...the result is the same - stuck logo.
tishotch said:
When I press power and vol-up from a cold start, It open only stock recovery (not TWRP). After reset to factory ( second options)...the result is the same - stuck logo.
Click to expand...
Click to collapse
Then you had Safestrap installed which emulates twrp but provides few real protections. You likely overwrote key portions of your device when flashing Nexus v4 which is incompatible with safestrap and has other prerequisites (ie: unlocked bootloader) which you ignored. There is no known recovery. Sorry, mate.
Thanks for the explanation, despite the bad news
Whether my Amazon warranty is valid in this case ?
tishotch said:
Thanks for the explanation, despite the bad news
Whether my Amazon warranty is valid in this case ?
Click to expand...
Click to collapse
Amazon is pretty good about providing replacements/refurbs during the warranty period which is typically 1 year from the date of purchase. I would not mention safestrap, twrp, nexus, rooting or any other 'key word' that suggest you were using your device in a manner other than Amazon intended. If honored the replacement will likely be more difficult to root and probably will not permit the installation of Safestrap v3 without some risky gymnastics. Safestrap v4 is in development but not yet ready for prime time (no pun intended).
Good luck.
I am thinking of buying Kindle Fire HDX 8.9 off ebay that says unable to register with Amazon . As i do not want it as a Kindle and would root and put custom rom on it would this be a problem in any other way?
bbthebeard said:
I am thinking of buying Kindle Fire HDX 8.9 off ebay that says unable to register with Amazon . As i do not want it as a Kindle and would root and put custom rom on it would this be a problem in any other way?
Click to expand...
Click to collapse
You don't have enough information to know whether it can be rooted or accept a custom ROM. Only firmware versions 4.5.2 and below can be rooted. The bootloader can only be unlocked with firmware 3.2.6 and below (ideally 3.2.3 or below). Between those versions you can install Safestrap and a limited selection of ROMs. Be aware Kindles in general and HDX models in particular are not like other android devices. Difficult to tame and easy to brick. The normal suite of advanced tools and recovery techniques don't work with Kindles including 'factory' cables and most fast boot commands. Make a simple mistake and you'll have an expensive door stop.
One has to question any device that can not be registered with Amazon. Why is that? A factory reset should allow the device to be registered to either the previous or new owner.
I,ll give it a miss
Davey126 said:
You don't have enough information to know whether it can be rooted or accept a custom ROM. Only firmware versions 4.5.2 and below can be rooted. The bootloader can only be unlocked with firmware 3.2.6 and below (ideally 3.2.3 or below). Between those versions you can install Safestrap and a limited selection of ROMs. Be aware Kindles in general and HDX models in particular are not like other android devices. Difficult to tame and easy to brick. The normal suite of advanced tools and recovery techniques don't work with Kindles including 'factory' cables and most fast boot commands. Make a simple mistake and you'll have an expensive door stop.
One has to question any device that can not be registered with Amazon. Why is that? A factory reset should allow the device to be registered to either the previous or new owner.
Click to expand...
Click to collapse
Thanks for reply, Having already got a kindle fire hd i thought the hdx would be no problem rooting , Having read your thoughts and other peoples comments i think i will steer clear and definitely give dodgy ebay listing a miss
Hey everyone I have a kindle fire 3rd gen HDX 7" and my ultimate goal is to install a CyanogenMod OS instead of the stock fire OS. I have been following a youtube guide on installing CM and I was able to get it rooted. The guide instructed that I use an app called "fireflash" to flash TWRP, then install CM from there. Unfortunately I was unable to get fireflash to work, so I downloaded an app called "flashify" to flash "TWRP" as the recovery partition and "U-Boot" as the boot partition, as per the video's instructions.
Once I hit the flash button, the kindle for some reason booted into fastboot mode and it has been there ever since. After some research, I have tried to interact with my device in fastboot mode, but only commands that begin with “fastboot -i 0x1949” will work, and will not boot back into the stock OS, but instead gives the error message “FAIL: oem idme not allowed for locked hw.” When I give the command “adb devices”, nothing shows up. Also, when I try to flash TWRP, the command prompt simply tells me that the recovery image cannot be loaded. I am assuming that I need to unlock my bootloader to proceed, but I would appreciate it if someone could confirm this.
Sorry if this is a little long, but I wanted to be thorough. Can anyone suggest a way to either get back into stock fire os so I can start over, or proceed to install TWRP and CM in fastboot mode?
tropicallazerbeams said:
Hey everyone I have a kindle fire 3rd gen HDX 7" and my ultimate goal is to install a CyanogenMod OS instead of the stock fire OS. I have been following a youtube guide on installing CM and I was able to get it rooted. The guide instructed that I use an app called "fireflash" to flash TWRP, then install CM from there. Unfortunately I was unable to get fireflash to work, so I downloaded an app called "flashify" to flash "TWRP" as the recovery partition and "U-Boot" as the boot partition, as per the video's instructions.
Once I hit the flash button, the kindle for some reason booted into fastboot mode and it has been there ever since. After some research, I have tried to interact with my device in fastboot mode, but only commands that begin with “fastboot -i 0x1949” will work, and will not boot back into the stock OS, but instead gives the error message “FAIL: oem idme not allowed for locked hw.” When I give the command “adb devices”, nothing shows up. Also, when I try to flash TWRP, the command prompt simply tells me that the recovery image cannot be loaded. I am assuming that I need to unlock my bootloader to proceed, but I would appreciate it if someone could confirm this.
Sorry if this is a little long, but I wanted to be thorough. Can anyone suggest a way to either get back into stock fire os so I can start over, or proceed to install TWRP and CM in fastboot mode?
Click to expand...
Click to collapse
Unfortunately, there is little chance of recovery given the steps taken and symptoms exhibited. Fireflash is not compatible with HDX devices and almost always yields a brick. Sorry to break the news.
Hey thanks for the reply, I was afraid of the whole brick thing, but i will be more careful next time. I have learned my lesson! Luckily for me, I just got off the phone with Amazon customer support and they are willing to send me a new one. They didnt even ask if I had rooted it or anything, just whether or not I had dropped it or poured anything on it. So that being said, does anyone know of an accepted, working method to install CM on a Kindle Fire HDX 7" Thor that would be willing to provide a link or two? Thanks!
tropicallazerbeams said:
Hey thanks for the reply, I was afraid of the whole brick thing, but i will be more careful next time. I have learned my lesson! Luckily for me, I just got off the phone with Amazon customer support and they are willing to send me a new one. They didnt even ask if I had rooted it or anything, just whether or not I had dropped it or poured anything on it. So that being said, does anyone know of an accepted, working method to install CM on a Kindle Fire HDX 7" Thor that would be willing to provide a link or two? Thanks!
Click to expand...
Click to collapse
Yep - CM11, CM12 and/or Nexus v4 can be installed on most HDX models. You need to do some prep work up front the nature and magnitude determined by the version of FireOS on your replacement unit. Post back when you get it and someone will guide you through the process.