H9500+ = ZP900 : 1GB RAM 8MP Rear Camera
H9300+ = ZP900S : 512MB RAM 5MP Rear Camera
HDC Galaxy Note 2 : 512MB RAM 8MP Rear Camera (I don't sure about this model)
There's 2 way to install ROMS for these models
1. Flashtool 4.0 : for install with scattered rom files : use for install CWM Recovery or partition modifying patch - it's hard for the first time installation because Driver installation. please be patient
2. CWM Recovery : for install with zip rom file : after install CWM Recovery, i usually use this way for installation
INSTALLATION TOOLS
USB drivers zopo - mediafire.com/?l88i78kesvp4b49
Flashtool4 - mediafire.com/?sf2dk21sm1a1a4g
CWM Recovery - mediafire.com/?9xr03iagvb07vcb
2.5GB data partition.7z - https://dl.dropbox.com/u/11743546/2.5GB data partition.7z - Install with flashtool 4.0 for increase /data partition to 2.5GB app space! & CWM Recovery Included
INSTRUCTIONS by darevix
- First it is advisable to backup your data applications with Titanium Backup or Rom Toolbox.
- You must have ClockworkMod Recovery installed, instructions below.
- Copy the ROM to the root of the SD card.
- Boot into CWM recovery mode. A simple method is to restart the phone by holding the button "volume up" down.
- Although not required, I recommend making a backup of your current ROM in case things go wrong. (Backup and restore> backup) will take a few minutes.
- Do a "wipe data / factory reset"
- Install the rom with the option: Install zip from sdcard> choose zip from sdcard> zom name. Zip
- Reboot and wait.
INSTALL ClockworkMod recovery by darevix
1 - Download:
USB drivers zopo - mediafire.com/?l88i78kesvp4b49
Flashtool4 - mediafire.com/?sf2dk21sm1a1a4g
CWM Recovery - mediafire.com/?9xr03iagvb07vcb
We took 2nd phone battery and put it back on.
3 - FlashTool execute, open the file downloaded scatter of recovery before and give the download button. We display a message indicating that not all files have been loaded. We will give the button if we want to continue.
4 - With battery and mobile tucked off connect the phone to the PC via the USB cable. Windows will detect a new device. When applying for a driver to choose the previously downloaded our version of Windows.
5 If we get an error FlashTool to overcome the waiting time, we repeat the steps 2,3 and 4 with the driver already installed.
dynamo4ever said:
will make edt. in 1-2 hours , the form will be better
1st of all the flashtool : http://d01.megashares.com/dl/3zCOrTe/Flashtool_4.0.rar
here is the CWM from taiwan101 for the 9300+: http://d01.megashares.com/dl/KicT315/Taiwan101_CWM_Recovery.rar thx for nice work
here is my moded stockrom ( root ) for the 9300+ : http://d01.megashares.com/dl/bX4QEh8/Heo 9300+ stock root.rar
here is the share folder from jonny hung for taiwan101 rom for 9300+ : http://www.4shared.com/folder/rwLGnosD/Hero-9300.html thx for nice work
here is my smaller release from jonny hungs rom ( root chinesse an trash apps deleted ) for 9300+ : comming soon
here another working Rom , Zopo 900 MoD for 9300+ from russia : http://narod.ru/disk/60451899001.01...958_9300+_zwx_ics_sw_20120815-163917.rar.html Kyrie1965 thx for nice work
this i have tested and work stable
the standart zopo firmware works ,but without backcam camera is not the same hardware
see you later
Click to expand...
Click to collapse
HyperEscape said:
Thank you so much. After some hit and trial I was able to flash the ROM. Actually it installs two VCOM (usb2ser) drivers which are to be configured before the flashtool actually recognizes the phone virtual COM port. But it actually needs flash tool to be installed properly. So for any newbie, based on my experience the following should be the path followed. I have installed USBLogView http://www.nirsoft.net/utils/usb_log_view.html to watch and monitor which USB device are installed. I am using Windows XP-32 bit but he procedure should remain mainly similar for Windows 7 as well.
1. First turn off the phone, pull out the battery. Keep the microUSB cable connected to you PC, but dont connect the phone to it as yet.
2. Download the intended ROM files,for me it was the modded ZOPO ROM (downloaded from the earlier posts in the same thread) for ZP900. it is a RAR/ZIP file which you have to unRAR in any folder, make sure the folder name is short and preferably should not contain spaces. I created a folder in my D drive called D:\ZP900\ZP900 ( i will be posting my sample files). When unzipped it will extract many files which you have to correctly assign with the relevant path in the flashtool to work properly
3. When you unRAR the Flashtool (downloaded from earlier posts in this thread) folder there is a subfolder called Android (in which you have an Android.INI, this file ) . Do the process mentioned in the screenshot to edit your Android.ini file properly.
4. Run the flash tool , select your correct scatter file which will be found in the ROM unzipped folder, for me the file name is "MT6577_Android_scatter_emmc.txt" which came with the ZOPO ROM (downloaded from the earlier posts in the same thread) for ZP900. This scatter file contains the memory addresses which are to be rewritten in the phone ROM with the correct type of images (found in the unzipped ROM directory). It is different for every mobile architecture , in our case it is the correct one for MTK6577 (which is the ZOPO/Hero 9500). Once you select scatter file the file locations for various image types would be automatically files from the android.ini file which we edited in the last step. Now open the Windows device manager to see what USB device gets in installed. Also open the USBLogview to see what is plugged in and out (just if you like to do so). Follow the steps in the next screen shot to attach the phone for the first time , it will show an unidentified MTKxxxx_preloader VCOM.
5. When it does select the install driver manually option and choose the USB drivers (as downloaded from the earlier post and unzipped in a separate folder) it will install the first VCOM port as seen in USBLogview. It is the behaviour of this port to keep plugging/unplugging itself . So you have to grab the right moment in device manager to click the device and open its properties window to supply the driver yourself.
After that what I did was to remove the phone, insert the battery, keep it switched off. Exit the flashtool, re-run it again to repeat the procedure in step number 4 till the end, and then reconnect the phone (this time with battery and turned OFF), this time it will detect another unknown VCOM device, as earlier supply the same driver as you have downloaded from the same location as you did previously, but this time it will install a slightly differently named VCOM device and it will stay in device manager after the installation, unlike the first device which keeps flashing in/out. Check out the screen shot.
Once this second device is correctly installed the firmware flashing begins itself, when the flashtool bar turns red/purple, then yellow and finally you will be shown the green circle with OK prompt.
Hopefully if you did it right, you have flashed your Hero H9500+ (mine with 1G RAM) with the ZOPO ZP900 ROM. After a lot of frustration at last this was the way which worked for me of course with the guidance from the posters.
Happy flashing and say thanks if it helped you.
Click to expand...
Click to collapse
ZOPO STOCK ROM
zopomobile.com/xiazai.php
Originally Posted by Kyrie1965
Latest stock ZOPO 900 (WOHTC G36, etc., any with 1 GB RAM) ROM 29.08.2012: ZP900_20120829-113139_PC : http://kuai.xunlei.com/d/DDOCSMPRUGGL
Latest stock ZOPO 900S (9300+, H9500, H9500S, etc., any with 512 MB RAM) ROM 31.08.2012: ZP900S_20120831-104539_PC : http://kuai.xunlei.com/d/DSFPWQMUVYFT
MOD based on ZP900_20120829-113139_PC: ZP900_20120829-113139_PC_MOD
http://narod.ru/disk/60395664001.84...0_ZWX_ICS_20120829-113139_LXL_PC_MOD.rar.html
MOD based on ZP900S_20120831-104539_PC: ZP900S_20120831-104539_PC_MOD
http://narod.ru/disk/60864110001.e0...58_ZP900S_ZWX_ICS_HW_20120831-104539.rar.html
http://narod.ru/disk/60864110001.e0...58_ZP900S_ZWX_ICS_HW_20120831-104539.rar.html
HDC Galaxy Note ROM by Cristallx
http://narod.ru/disk/60451899001.01...958_9300+_zwx_ics_sw_20120815-163917.rar.html
H9300/ZP900S ROM
http://narod.ru/disk/60864110001.e0...58_ZP900S_ZWX_ICS_HW_20120831-104539.rar.html
H9500/ZP900 ROM
http://www.4shared.com/rar/yo6LqGpG/MP_MT77_root_en_play_zp900s_zw.html
ZP900S Stock ROM from Mawe79
http://www.movilesdualsim.com/foro/...CS-4-0-4-para-ZP900-y-clonicos-de-1GB-y-512MB
darevix's DRX ROM
i'm using this rom
http://bbs.lewaos.com/download.php?rom=release
Lewa OS ROM
"everything works. Chinese folks will be very happy since it is primarily made with Chinese as the default language. You can select english but it is not very accurate and you will see many grammatical and syntax error. Chinese does creep in some of the applications which makes it difficult to use them. however the rom is super smooth without any glitches"
commented by vijayar
How to Install
Download the correct zip file
Search and install 7-zip & Notepad++ via google on your PC.
Open Lewa ROM with 7-zip but don't extract it.
Drag & drop out META-INF\com\google\android\updater-script to ur PC desktop
Open it with Notepad++ & delete the first 2 lines & save it.
Drag & drop it back to open lewa ROM in 7-zip
Save and close
Flash this modified zip via CWMR
zp900s 20121029 rom from russian forum
recommended by ilut74
http://forum.china-iphone.ru/viewtopic.php?f=85&t=22830
Where did you found the rom??
If you find one compatible rom please tell us
Iheings vow
dskhas said:
Where did you found the rom??
If you find one compatible rom please tell us
Click to expand...
Click to collapse
i didn't found the other rom
so i search the zopo mobileshop's blog that guide the way to flash recovery to CWM recovery and you can root with it
but before that i've just flash wrong boot.img (ZP900) so the camera can't be used
if you ask about zp900's rom you can find it here
http://www.zopomobileshop.com/en/content/9-download-zopo-mobile-latest-rom
PLEASE HELP ME ABOUT BOOT.IMG PLEASE!!
Stock ROM for "OEM ZOPO 900" (9300+, H9500, H9500+, etc. with 512 MB RAM and 5 MP sensor) 15.08.2012: http://narod.ru/disk/60451899001.01...958_9300+_zwx_ics_sw_20120815-163917.rar.html
Kyrie1965 said:
Stock ROM for "OEM ZOPO 900" (9300+, H9500, H9500+, etc. with 512 MB RAM and 5 MP sensor) 15.08.2012: http://narod.ru/disk/60451899001.01...958_9300+_zwx_ics_sw_20120815-163917.rar.html
Click to expand...
Click to collapse
is there because the camera bug fixed? So runs the back camera ? I had a Mod. Zopo 900 Rom , also with 512 mb , but non working back Cam
edt. self tested all works well , cam works also
@xenoxc
I have backups from the Real Hero 9300 + firmware, but must be restored with the Chinese cwm
which cwm you got?
And i also have a Custom Rom , from Taiwan 101 This is the best for me at the Moment , since it is already rooted,
and otherwise very good runs.:good:
I Upload that all , but Takes a while .
Greets
will make edt. in 1-2 hours , the form will be better
1st of all the flashtool : http://d01.megashares.com/dl/3zCOrTe/Flashtool_4.0.rar
here is the CWM from taiwan101 for the 9300+: http://d01.megashares.com/dl/KicT315/Taiwan101_CWM_Recovery.rar thx for nice work
here is my moded stockrom ( root ) for the 9300+ : http://d01.megashares.com/dl/bX4QEh8/Heo 9300+ stock root.rar
here is the share folder from jonny hung for taiwan101 rom for 9300+ : http://www.4shared.com/folder/rwLGnosD/Hero-9300.html thx for nice work
here is my smaller release from jonny hungs rom ( root chinesse an trash apps deleted ) for 9300+ : comming soon
here another working Rom , Zopo 900 MoD for 9300+ from russia : http://narod.ru/disk/60451899001.01...958_9300+_zwx_ics_sw_20120815-163917.rar.html Kyrie1965 thx for nice work
this i have tested and work stable
the standart zopo firmware works ,but without backcam camera is not the same hardware
see you later
kyrie1965 said:
stock rom for "oem zopo 900" (9300+, h9500, h9500+, etc. With 512 mb ram and 5 mp sensor) 15.08.2012: http://narod.ru/disk/60451899001.01...958_9300+_zwx_ics_sw_20120815-163917.rar.html
Click to expand...
Click to collapse
great!! Thanks!!
dynamo4ever said:
will make edt. in 1-2 hours , the form will be better
1st of all the flashtool : http://d01.megashares.com/dl/3zCOrTe/Flashtool_4.0.rar
here is the CWM from taiwan101 for the 9300+: http://d01.megashares.com/dl/KicT315/Taiwan101_CWM_Recovery.rar thx for nice work
here is my moded stockrom ( root ) for the 9300+ : http://d01.megashares.com/dl/bX4QEh8/Heo 9300+ stock root.rar
here is the share folder from jonny hung for taiwan101 rom for 9300+ : http://www.4shared.com/folder/rwLGnosD/Hero-9300.html thx for nice work
here is my smaller release from jonny hungs rom ( root chinesse an trash apps deleted ) for 9300+ : comming soon
here another working Rom , Zopo 900 MoD for 9300+ from russia : http://narod.ru/disk/60451899001.01...958_9300+_zwx_ics_sw_20120815-163917.rar.html Kyrie1965 thx for nice work
this i have tested and work stable
the standart zopo firmware works ,but without backcam camera is not the same hardware
see you later
Click to expand...
Click to collapse
So will this ROM and rooting method also work on original ZOPO ZP900 Leader. I am planning to buy one, however I am reading in the thread that this ROM is limited to 512MB RAM, where the original ZOPO has 1GB RAM (opposed to the replica Hero i9300+ with 512MB). So if I root and flash this ROM , will I be limited to use the 512RAM only and would be enjoying the enhanced speed and performance difference there would be in a original ZOPO ZP900.
Also need your advice whether to go for the original ZOPO ZP900 or the Hero i9300+, since you guys already seem to have em. Can you please recommend based on the following areas. It is ok if the Hero is reasonably good enough and fast , i don't think I would then go for a ZOPO.
1. Speed and performance, any huge difference.? 1GB RAM v/s 512MB RAM.
2. Screen quality qHD , any noticeable difference in sharpness, colour clarity and visual aesthetics. I read that the original ZOPO has Corning Gorilla Glass. Any differce in the resolution b/w the ZOPO and Hero, does the qHD really feels good enough on Hero.
3. Overall build quality, plastic body smooth or thin and cheap.
4. Any sensors missing in the Hero ? Accelerometer, Compass, Gyroscope, GPS, Proximity , Light.
5. Battery timings and results (provided that there are two batteries shipped with the Hero 9300+).
6. Any other areas you feel are important to make a decision to spend the extra money on the original ZOPO.
Would be a great resource for anyone planning to buy but confused in making the decision.
Thanks for your replies so I can finalize my decision.
1. Speed and performance, any huge difference.? 1GB RAM v/s 512MB RAM.
FOR ME I've played with other model the 512MB & 1GB RAM difference is not much, it's increased smoothness but a little
2. Screen quality qHD , any noticeable difference in sharpness, colour clarity and visual aesthetics. I read that the original ZOPO has Corning Gorilla Glass. Any differce in the resolution b/w the ZOPO and Hero, does the qHD really feels good enough on Hero.
qHD is noticeable difference for me, it's sharp and good color but i didn't thinks it's gorilla glass for Hero H9300+, unknown for ZP900
3. Overall build quality, plastic body smooth or thin and cheap.
build quality is fine, not look very cheap
4. Any sensors missing in the Hero ? Accelerometer, Compass, Gyroscope, GPS, Proximity , Light.
there's all sensor except gyroscope
5. Battery timings and results (provided that there are two batteries shipped with the Hero 9300+).
it's fine stand by more than 1-2 days if you don't play it too much
6. Any other areas you feel are important to make a decision to spend the extra money on the original ZOPO.
no need for me Hero H9300+ is good for me
Thanks xenoxc,
I just ordered a H9500 (9300+) from Aliexpress. This is the same with 1GB of RAM, so hopefully would be equal to original zopo.
Can I use all theses mods mentioned in the thread on this mobile and would still get all the RAM and front/back camera working.
plus is there a mod or a kernel for this phone which enables BLN.
Thanks for your replies.
Sent from my GT-I9100 using xda premium
HyperEscape said:
Thanks xenoxc,
I just ordered a H9500 (9300+) from Aliexpress. This is the same with 1GB of RAM, so hopefully would be equal to original zopo.
Can I use all theses mods mentioned in the thread on this mobile and would still get all the RAM and front/back camera working.
plus is there a mod or a kernel for this phone which enables BLN.
Thanks for your replies.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
i've tried to search in aliexpress but i can't find the 1G RAM with 5MP camera model
can you send me the link?
about the rom, i used to flash the H9300+ with ZP900 the only bug is the Camera so i think that RAM isn't the problem
This is my first chinese phone, I don't recive yet, I have rooted other phone and tablets but I have many dudes
Before install a mod CWM I need to root the phone??
Is possible to do a backup of original firmware before flashing any thing??
There are some tutorial or guide to flash??
Thanks for advence
dskhas said:
This is my first chinese phone, I don't recive yet, I have rooted other phone and tablets but I have many dudes
Before install a mod CWM I need to root the phone??
Is possible to do a backup of original firmware before flashing any thing??
There are some tutorial or guide to flash??
Thanks for advence
Click to expand...
Click to collapse
you can install CWM recovery before root
you can backup original firmware but after you install CWM you can't backup the original recovery
xenoxc said:
i've tried to search in aliexpress but i can't find the 1G RAM with 5MP camera model
can you send me the link?
about the rom, i used to flash the H9300+ with ZP900 the only bug is the Camera so i think that RAM isn't the problem
Click to expand...
Click to collapse
I have purchased from the following link :
http://www.aliexpress.com/item/Hero-H9500-5-3-QHD-960-540-1GHz-dual-core-android-4-0-3G-tablet-phone/630619479.html
Will get in touch with you for further modding with custom ROM and recovery once I receive the mobile.
Thanks.
dynamo4ever said:
will make edt. in 1-2 hours , the form will be better
1st of all the flashtool : http://d01.megashares.com/dl/3zCOrTe/Flashtool_4.0.rar
here is the CWM from taiwan101 for the 9300+: http://d01.megashares.com/dl/KicT315/Taiwan101_CWM_Recovery.rar thx for nice work
here is my moded stockrom ( root ) for the 9300+ : http://d01.megashares.com/dl/bX4QEh8/Heo 9300+ stock root.rar
here is the share folder from jonny hung for taiwan101 rom for 9300+ : http://www.4shared.com/folder/rwLGnosD/Hero-9300.html thx for nice work
here is my smaller release from jonny hungs rom ( root chinesse an trash apps deleted ) for 9300+ : comming soon
here another working Rom , Zopo 900 MoD for 9300+ from russia : http://narod.ru/disk/60451899001.01...958_9300+_zwx_ics_sw_20120815-163917.rar.html Kyrie1965 thx for nice work
this i have tested and work stable
the standart zopo firmware works ,but without backcam camera is not the same hardware
see you later
Click to expand...
Click to collapse
How can I use the 'moded stockroom ( root ) for the 9300+ '?
I've already downloaded it..
thanks...
and also, can you also give me a scatter file for 9300+ ?
thanks again..
Latest stock ZOPO 900 (WOHTC G36, etc., any with 1 GB RAM) ROM 29.08.2012: ZP900_20120829-113139_PC
Latest stock ZOPO 900S (9300+, H9500, H9500S, etc., any with 512 MB RAM) ROM 31.08.2012: ZP900S_20120831-104539_PC
MOD based on ZP900_20120829-113139_PC: ZP900_20120829-113139_PC_MOD
MOD based on ZP900S_20120831-104539_PC: ZP900S_20120831-104539_PC_MOD
MOD:
- CWM Recovery included
- rooted (su, Superuser.apk, RootExplorer.apk)
- DATA (for apps) partition size increased to 1 GB (512 MB in stock)
- removed all Chinese software
- default language is English
Kyrie1965 said:
Latest stock ZOPO 900 (WOHTC G36, etc., any with 1 GB RAM) ROM 29.08.2012: ZP900_20120829-113139_PC
Latest stock ZOPO 900S (9300+, H9500, H9500S, etc., any with 512 MB RAM) ROM 31.08.2012: ZP900S_20120831-104539_PC
Click to expand...
Click to collapse
can you please upload those stock roms to different file hosting sites?
coz that host there is really slow..
Thank you
Hi everybody!
I want to buy this phone, but, what you guys think about it?
It's a good phone for web-browsing? (which will be the main use of the phone)
hi guys
i'm very interested of buying the 9300+ model with the 512 mb ram.
can i add an hebrew language (full system support) on it? the 4.1.1 JB comes without hebrew when you buy it...
thanks for your help!
no mobile of these have 4.1 (JB), chinese only modified build.prop, but it is not really jelly bean... we should try to port jb.. who agrees?
Time Appropriate Greetings fellas!!!
VIBE_PURE is based on the latest VIBEUI ROW Indian release for K3 Note by Lenovo and so it has the bugs that will be present in that release. This rom is developed with the idea to have the best of both words which is the simplicity of AOSP and the features of lenovo tied to K3 note, its a learning process for me and those who wish to test it or modify it are welcome to do it but please credit me and people in my credit section and also please comment in the thread what u have done to correct the bug because in the end all we need is Fully functioning ROM and knowledge of how to do it....
Known Bugs
Whatever the bugs listed for the latest ROW Release.
this is a stable release....rooted, busybox, gapps, xposed and few MultiLanguage...
Has VR mode and Dolby Atmos
With VIBEUI Dev 1629 Kernel...
Sticked to ROW Modem...
Thermal Files from Leishui 1629 Rom
Has Android Nify Xposed module installed which can be enabled in Xposed Installer
MiXplorer and Noozy Music Player Preinstalled.
WARNING TEST THIS AT UR OWN RISK....BACKUP EVERYTHING U HAVE BEFORE DOING ANYTHING...
Boot into TWRP recovery
Wipe Dalvik Cache, Cache, System and Data
Flash the ROM
Reboot....
POST 1 Intro
POST 2 Changelog
ROM DOWNLOAD
VIBE PURE Stable 1
SCREENSHOTS
Created : 26/07/2016
Last Release : 26/07/2016
State : STABLE
Credits :
Lenovo for phone and software, LeiShui, chainfire for supersu, osm0sis for busybox installation finally SuperR for SuperR's Kitchen with which the rom is made.
CHANGELOG
Vibe Pure Stable 1 - Initial Release
Downloading now. Will flash and update soon!
EDIT : I am using the Stable 1 version! Fantastic ROM. Completely preserves the functionality of Lenovo but with an clean front. Hats off. Will test battery life and update soon.
Thankyou pvkiniyan95 for the ROM. I installed on my Lenovo k3 Note K50a40.
UI was butter smooth and no issues regarding gapps FC's. Initial boot took 30mins then removed battery and formatted through twrp 2.8 ,then rebooted. Worked fine. Need more time to check all features. But my experience with this ROM gave pleasant and very smooth. Battery stable. Used hotstar live TV streaming for 30mins consumed around 2%battery. Amazing power stability.
There's a crash when trying to set a locally stored ringtone through Sound settings. Happens all the time. Any workarounds for that ?
I really like this rom but for some reason it cannot find internal sd card. The sdcard0 is missing.
When I connect pen drive via otg it's show POP-UP shows "unfortunately, system ui stoped"
Thx for this room to developers and xda team for this room.flashed today working very well.
It's not the problem
vaibhavmane4 said:
When I connect pen drive via otg it's show POP-UP shows "unfortunately, system ui stoped"
Click to expand...
Click to collapse
It's not the problem with this room it is the problem with mi file manager delete it and get another one like es file manager.
working twrp ? for all custom roms ?
Can some provide the download link. Above link is not working
[Check the first reply for all links]
Hello guys,
Here's my Redmi Note 3 running on CM14.1 (Abhishek's December 3 built).
[Check the video for all features: Link 1*]
Disclaimer!
I don't responsible if your device won't boot, do it ona your own risk! You were warned!
Anyway,
In order to make your Redmi Note 3 like this, you have to follow some steps!
1. Unlock the bootloader,
2. Root your device
3. Install a custom recovery (TWRP)
[For the above 3 steps, I highly suggest to to check Jay Kapoor's tutorial: Link 2*]
4. Install CM14.1 Abhishek's December 3 built (Navbar & Round icons will not work in any other ROM, don't worry it supports VOLTE ?)
[For this step, follow Madhur Agarwal's tutorial:
Link 3* . Guys everything is ok just you have to download the ROM file from this link: Link 4* instead of the link mentioned in the video, all other steps are same just download the ROM file from here or you can directly check Abhishek's post: Link 5* ]
5. Download ES File Explorer: Link 6*
6. Now go to settings> About phone and tap on the Build Number for 6 times & it'll show that develops operation enabled. Now go to develops operation>Root access & select App only. Now reboot your phone.
7. Now open ES File explorer & grant root access.
Almost done now for step 8 & 9 you have to check 2 XDA developer's forum.
8. Enable Pixel Navbar: Link 7*
9. Round Pixel Style Icons: Link 8*
Okay, this is the last step! Now download the zip file (from here: Link 9 ) & extract it in your internal storage. Now this is the final Step!
10. Flash the 4 zip file in thia order:
i. GooglePixelBootanimation1920x1080.zip
ii. Pixel_Sounds.zip
iii. GoogleAssistantBuildProp.zip
iv. GoogleAssistantVelvet.zip
Okay guys this is very important! I don't know why but if you don't follow the steps, it'll not work!
But If everything goes fine, congratulations your Redmi Note 3 is now become a Google Pixel (Softwarically ?).
[** I'm really really sorry but I'm a new member & this is my 1st post. So I can't post any links?!
So I decided to post the thread & Mention all the links in the first reply. Sorry for that. Check the 1st reply for all the links]
So here are the links:
Link 1* : http://bit.ly/2gi2WYj
Link 2* : http://bit.ly/2ghTUuk
Link 3* : http://bit.ly/2ghQKqv
Link 4* : http://bit.ly/2ghUaJL
Link 5* : http://bit.ly/2h0WDXn
Link 6* : http://bit.ly/2gi0oct
Link 7* : http://bit.ly/2h0Vkrj
Link 8* : http://bit.ly/2h0XmYB
Link 9* : http://bit.ly/2gi7WvR
can we flash it over MIUI latest Global Developer version??
Triggered from my Nexus 10
amitroutray said:
can we flash it over MIUI latest Global Developer version??
Triggered from my Nexus 10
Click to expand...
Click to collapse
No, this for cm14.1 rom only
Can I use this on CM14.1 Nightly TheStrix build?
Can i get it on dev rom
Sent from my Redmi Note 3 using Tapatalk
Nice work but I prefer pure AOSP or CM as I rarely use all of that features,
Anyway, thanks for sharing.
Sent from my Redmi Note 3 using Tapatalk
MY ULTIMATE PIXEL UI MOD FOR OFFICIAL CM14.1 BY THESTRIX PLEASE LOOK AT IT.
Can use with custom rom? I use Epic Rom for 6.12.15
New stable ROM for MI5C - miui_MI5C_V8.5.3.0.NCJCNED_dd8416320b_7.1
Initial tests show good speeds on H compared to V8.1.19.0 (100K compared to 7M)
Download Link
https://mega.nz/#!c2ZgDZ7a!MoID1GvDC6PezTZ17NANZHsYgui9qjBBZp_Ygive6s8
the link isn't working
stewc said:
New stable ROM for MI5C - miui_MI5C_V8.5.3.0.NCJCNED_dd8416320b_7.1
Initial tests show good speeds on H compared to V8.1.19.0 (100K compared to 7M)
Link
the link isn't working ,the below error shown after the count down of download finished
Click to expand...
Click to collapse
Link updated
could share the steps to install it as till now.i.have big to.KNOW how.to.install.it
beko555 said:
could share the steps to install it as till now.i.have big to.KNOW how.to.install.it
Click to expand...
Click to collapse
open updater app;
see top right corner choose update packages select that download rom;
u should be connected to internet. package will get verified;
or other method is to install twrp in your phone to make force install this new rom
could you tell how can i twrp this.in details.plx.to avoide any wrong step
is this rom supporting multi languages and google play store
is this rom supporting multi languages and google play store
Click to expand...
Click to collapse
No, just Chinese and no Play store
is there any way to add multi language to this rom ?
You'll need to flash a multirom - https://xiaomi.eu/community/forums/miui-weekly-rom-releases.103/
mi 5c flash in fastboot mode after coming mi logo hange .not open. next download update file .flash in fastboot mode but flash erro bootlodear locked .please any solution
Hello everyone, whoever has a link to Miui 10 for Mi 5c
i looking for firmware mi 5c any body can help me please . need tested file . file name song
Over 400 views?! Thank you! ?
Hope we'll get 500 soon!
Nubia X GSI on A3 2017!
Instructions:
1. Flash Project Treble from https://forum.xda-developers.com/sa...ble-project-treble-galaxy-a3-2017-v1-t3953323
2. Flash Working Nubia GSI from https://sourceforge.net/projects/ve...bia-Aonly-9-20200115-ErfanGSI.img.gz/download
3. Flash GSI_PATCH_a3y17lte.zip to get fingerprint scanner working in-OS
4. Flash Permissiver v5 for patches https://androidfilehost.com/?fid=4349826312261812525
5. Reboot system
There you go! Very stable
GOOGLE APPS
Flash BiTGAPPS from https://bitgapps.cf/arm64/Pie/BiTGApps-arm64-9.0.0-R6_signed.zip
Bugs:
Can't send messages/send calls if detected SIM card
Nubia Account login isn't working
While others say they can't select their language, do it in setup instead
Gallery crashes when selecting 'Photos'
You have to use an external one (e.g. Camera Go) to take pictures since it doesn't come with its official camera app https://f.celsoazevedo.com/file/cfiles/gcm1/CameraGo.apk
You have to manually transfer A3 2017's stock wallpapers from here (Optional)
Screenshots: https://drive.google.com/drive/folders/1o6JDaTP2rDA12jL7bq-z9ZQXgO2o-rDt?usp=sharing
Post replies if you find any bugs, ok?
I can not send messages and send calls even if I detect the SIM card.
I also can't log in to my nubia account.
And I cannot fully use my language.
For example, when I choose Turkish language, there are English words in the system.
A nice system to choose if updated...
Please don't be like some developers. You don't have the luxury of not dealing with the project.. @amyhopps10
amyhopps10 said:
Over 400 views?! Thank you!
Hope we'll get 500 soon!
Nubia X GSI on A3 2017!
Instructions:
1. Flash Project Treble from https://forum.xda-developers.com/sa...ble-project-treble-galaxy-a3-2017-v1-t3953323
2. Flash Working Nubia GSI from https://sourceforge.net/projects/ve...bia-Aonly-9-20200115-ErfanGSI.img.gz/download
3. Flash GSI_PATCH_a3y17lte.zip to get fingerprint scanner working in-OS
4. Flash Permissiver v5 for patches https://androidfilehost.com/?fid=4349826312261812525
5. Reboot system
There you go! Very stable
GOOGLE APPS
Flash BiTGAPPS from https://bitgapps.cf/arm64/Pie/BiTGApps-arm64-9.0.0-R6_signed.zip
Bugs:
Can't send messages/send calls if detected SIM card
Nubia Account login isn't working
While others say they can't select their language, do it in setup instead
Gallery crashes when selecting 'Photos'
You have to use an external one (e.g. Camera Go) to take pictures since it doesn't come with its official camera app https://f.celsoazevedo.com/file/cfiles/gcm1/CameraGo.apk
You have to manually transfer A3 2017's stock wallpapers from here (Optional)
Screenshots: https://drive.google.com/drive/folders/1o6JDaTP2rDA12jL7bq-z9ZQXgO2o-rDt?usp=sharing
Click to expand...
Click to collapse
hi guys this GSI Nubia X port, Is it booting on Redmi note7 Lavender?
ahmet ferid said:
hi guys this GSI Nubia X port, Is it booting on Redmi note7 Lavender?
Click to expand...
Click to collapse
This forum is for A-series 2017 ONLY.
Go to the forum for your device please