Hi ,everyone ,
I'm sharing this recovery , ported by Syed Ahmed Ali Shah (All credits to him)
How to install:
Download Spflashtool and recovery zip file
Extract the zip file , you will find the recovery.img + scatter file
Open Spflashtool , and load that scatter file.
The recovery should appears now (in spflashtool , it is supposed to be chacked/selected)
Choose download only and press on download button
Turn of your device ,and plug it in
wait till the succes mark appears
unplug you're device and boot directly to recovery
the recovery will ask you t allow system modification , don't allow for now ...because this will brick (not really,it will stops at logo, can be fixed by rooting it) you're device..
Rooting the device :
Now that you have the recovery ,Download supersu.zip file and flash it with that recovery...
Backup your firmware before rooting/ allowing modification
I'm not responsible for any damage that could happen , do it at your own risk
Hello I have succeeded to boot to TWRP recovery tool but i don't see the buttons
I see only ReadOnly, Language
and also Give permission modification
and I am afraid to brick my new Allure A55 Slim
For updated rom
This method is suitable for marshmallow OTA updated? Because it is impossible to make a backup of rom/data in the MTK Droid tool, as well as generate a scatter file.
Done. TWRP has been flashed, then rooted. The current scatter file can be generated from a ROM backup created by SPFlashTool, using the WwR_MTK software. And also cuting the ROM to img files for flashing, look at 4pda.ru, really powerful combine.
Works for Blu Vivo 5 mini??
d3n1ls0n said:
Works for Blu Vivo 5 mini??
Click to expand...
Click to collapse
If you can make a backup and know how to use the recovery tools, then you can try. But I recommend trying a safer way first. With the Kingoroot application or AutoRoot Tools on this link https://qitapso.com/how-to-install-twrp-custom-recovery-on-blu-vivo-5-mini/ (works on Lollipop)
Related
I have an Vodafone Smart tab 2 (Lenovo A2107A) and i have attempted to instal a new room .
The thing is that i have got the error:
press and set the country code!
timeout failed!
The thing is that i have "cwm-based recovery v 6.0.1.5 and by mistake i flashed a room wich needed cwm 5.0.2. 8 cause i copied (by mistake) the wrong room .
I can get into cwm-based recovery v 6.0.1.5 but i cant do much as i dont have anymore that backup folder .
InfernoChz said:
I have an Vodafone Smart tab 2 (Lenovo A2107A) and i have attempted to instal a new room .
The thing is that i have got the error:
press and set the country code!
timeout failed!
The thing is that i have "cwm-based recovery v 6.0.1.5 and by mistake i flashed a room wich needed cwm 5.0.2. 8 cause i copied (by mistake) the wrong room .
I can get into cwm-based recovery v 6.0.1.5 but i cant do much as i dont have anymore that backup folder .
Click to expand...
Click to collapse
It sounds like you have two problems:
1. You have a Recovery (CWM) that's not the one you want.
2. You may be in jeopardy of loosing your NVRAM (Wifi Mac / MEID) if things get really bad, since you've lost your backup folder.
What I would do to get back to CWM 5...
1. get VCOM USB drivers installed
2. get SP Flash Tool installed
3. Find the appropriate scatter file and CWM recovery.img
4. open the scatter file in SPFT
5. then select *JUST* the RECOVERY block to write over
6. choose Download to write over that chuck of flash with the CWM5 recovery.img
(update: also there is a way to replace a recovery from within a recovery, someone might have cooked one of those up on the A2107 threads. It would be an update.zip that didn't do much other than flash the recovery.img to the proper part of flash)
syserr said:
It sounds like you have two problems:
1. You have a Recovery (CWM) that's not the one you want.
2. You may be in jeopardy of loosing your NVRAM (Wifi Mac / MEID) if things get really bad, since you've lost your backup folder.
What I would do to get back to CWM 5...
1. get VCOM USB drivers installed
2. get SP Flash Tool installed
3. Find the appropriate scatter file and CWM recovery.img
4. open the scatter file in SPFT
5. then select *JUST* the RECOVERY block to write over
6. choose Download to write over that chuck of flash with the CWM5 recovery.img
(update: also there is a way to replace a recovery from within a recovery, someone might have cooked one of those up on the A2107 threads. It would be an update.zip that didn't do much other than flash the recovery.img to the proper part of flash)
Click to expand...
Click to collapse
I did make another save just for nvram just in case .I just want to be able to acces my tablet pc,but i get stuck on that error that i had previously mentioned.
I dont have another backup(its corrupted)
I dont want another cwm (if i need to i would change it )
I would want to instal some "aftermarket" room ...
Well i instaled lewa and it was a succes.It works ,i've made my kingston card to be my the sistem sd card ..but i dont know how to root it .I have super user ,and root explorer but its not rooted and it doesnt work with my old method to root.
This is the method I discovered to root and install Custom ROMs on my Micromax A34..
I hope this will help you well...
There are 3 steps for your destination to root and install Custom ROMs on your Micromax A34..
Step 1> Root Your Model..
Step 2> Flash/Install Custom Recovery module for your Model..
Step 3> Flash/Install Custom ROM for your Model....
I am discussing all of these steps by this post here.. Please read carefully...
Step 1>>>> ( To Root Your Android Phone ) ( Any Android Phone is Supported For ROOT by this Method )
Components: A PC, Your Android phone, Your Original Data Cable, RootMaster.exe, Moborobo PC Suite..
A. Firstly Install Moborobo PC Suite from Here and install...(Download MOBOROBO PC SUITE
B. Then install Rootmaster from link given on file attached.. (Download ROOTMASTER from link given on file attached..)
C. Now connect your Android Mobile by Data Cable and make sure that Debugging mode is turned on from your handset..
( Debugging mode can be turned on from your mobile from Settings>Development or Settings>Applications>Development )
D. Make sure that your model is now detected by Moborobo PC Suite..
E. Now click on root button on Rootmaster (Make sure that your Model is now detected on Root Master )
F. That's all.. Your Phone is Now Rebooted..
YOUR PHONE IS NOW ROOTED AND YOU CAN CHECK YOUR PHONES ROOT STATUS FROM ROOT CHECKER APPLICATION...(Download ROOT CHECKER Apk here)
Step 2>>>> ( To Flash Custom Recovery Module on Your Phone (Micromax A34 only) )
Components: Mobile Uncle Tools, Recovery Module..
A. Firstly install Mobile Uncle Tools on your phone..(Download Mobile Uncle Tools By links on file attached below )
B. Then place the Recovery file on your sdcard.. (Download Recovery Module By links on file attached below )
(Don't place it in any subfolder. Otherwise it will not be detected)
C. Now open Mobile Uncle Tools and click on Recovery Update and then click on the file you havre loaded to your sdcard i.e recovery.img file..
D. Your phone is now restarted. and a white screen is displayed.. Dont afraid.. Your phone's Recovery is now replaced with Custom recovery Module..
E. Your phone will be auto Restarted..
( Recovery Module is now replaced )
Step 3>>>> ( To Flash/Install Custom ROM for your Model (Micromax A34) )
Components: Custom/Official ROM specially designed for your phone..
A. Download Custom ROM zip file from any source and place it on your sdcard.. Don't try to extract this zip file.. ( One Custom ROM for MICROMAX A34 is given here) (Download Now)
B. Open Mobile Uncle Tools on your phone..
C. Click on Update tool. And choose your flash file or Custom ROM downloaded from any source.. And click on next..
D. You can find that your phone's Software is changed to your new Custom ROM based software..
Links File:View attachment Links.txt
ENJOY>>>>>>>
IDEA GENERATED BY SKR
after flashing recovery via mbl uncl tools . my recovery is showing a white blank after doing so many reboots also
michel¥¥ said:
after flashing recovery via mbl uncl tools . my recovery is showing a white blank after doing so many reboots also
Click to expand...
Click to collapse
Yes. Thats happens to me also. Dont worry. Your recovery is working fine.
Do flash your custom rom with mobile uncle tool app. The link to download apk is available on links.txt file given with the post. Install that tool and try to flash rom by that.
If you guys are planning to update your recovery to twrp or any other recovery after flashing your stock rom on your device .....Then insteaad of going to through the long way that is
1.Rooting ur device
2.Downloading mobile uncle mtk tools
3.Downloading Recovery img and placing it in Root Directory
4.Flashing img file with the app
Above Step will take quite a time So instead Of doing these things what u can do is ....
At the time of flashing Stock Rom on your device by YGDP tool .....When you reach the "Entering Download Mode" Step.... Perform These steps:-
1.Download TWRP or Whichever recovery img file u wanna flash on ur device
2.Go to YGDP tool Directory that will be C:\YLXZGJ\YGDP
3.you Will Find Down Files folder in it.... open it....U will thrn find a folder with your device name .... open that
4. In that folder u will find a recovery img file already there which is the original recovery provided with the stock rom which u probabely dont want to flash on ur device
5. Replace this file with the recovery file which u downloaded which u wanna flash
6.Then Follow the normal Flashing Procedure
For Video Explaining Above Steps Go To :- https://www.youtube.com/watch?v=fz3FcN2mvcs
For Video Showing How to flash Stock Rom with actual flashing Go To:- https://www.youtube.com/watch?v=HoR5rqEMj1M&list=PLYXSfprHMN9rHR0yF8UAlJ3dPfM6ARXDG&index=1
Hi. I just want to ask about TWRP recovery that is Compatible with my Phone :
Starmabile PLAY Click
Android 5.1 Lollipop
Spreadtrum SC7731
4.5"
Quadcore
Anyone with a Phone with same specs as mine that is using A TWRP ?
Please help. I wanna try yours.
Cant find on google with the same specs with my phone with twrp working.
I have tried those TWRP on google but none of them works. All of them take me Only to the Bootlogo. Only thing i know as of now is i have to port twrp to my stock recovery or to my phone.
Anyone please help.
maucerezo said:
Hi. I just want to ask about TWRP recovery that is Compatible with my Phone :
Starmabile PLAY Click
Android 5.1 Lollipop
Spreadtrum SC7731
4.5"
Quadcore
Anyone with a Phone with same specs as mine that is using A TWRP ?
Please help. I wanna try yours.
Cant find on google with the same specs with my phone with twrp working.
I have tried those TWRP on google but none of them works. All of them take me Only to the Bootlogo. Only thing i know as of now is i have to port twrp to my stock recovery or to my phone.
Anyone please help.
Click to expand...
Click to collapse
Hi Bro,
i have sc7731c (karbonn titanium 3D Plex ) device too. and i have tried many available img but none of them worked this would be because these devices are new and there no suitable recovery available simply because people have not made any till now..
There is many programs that allows u to create a new custom recovery if there is no recovery is available for your device try to goggle it.
On windows, philz magic touch recovery tool, android kitchen recovery image unpacker and so on.
Can i make you custom recovery using your stock image if you're too lazy
as i said above i have been trying to flash online available recoveries and accidentally flashed my stock u could help me out this
can u provide me you stock recovery image file ?
@Maucurezo
Hey dude! Im a pinoy. Im running with my STARMOBILE PLAY CLICK. As same as yours. Im running on the same Spreadtrum SC7731C and I flashed a Custom Recovery but it would only bring me to bootload. I kept finding solutions to get my Stock recovery but failed. We have the same Problem. I need the Custom recovery too. Help us admins
You can try and do it yourself. Porting TWRP and CWM to a new device. You'll need the stock rom for your device or simply make an image "dump" of the system files (boot.img, etc) via adb. Goodluck.
TWRP for sc7731c hope it helps
hi all a have a sc7731c phone on android 6.0 and i was able to install twrp on my device
it all started when i found a stock rom on the web (Google your device for stock - rom or - firmware)
once i had the rom i started searching for a way to extract the stock recovery from the rom
and i found this tool SPD_Upgrade_Tool_R4.0.0001 using this tool i extracted my stock
recovery from the ROM ( recovery.img ) , first stage complete i had a stock recovery
taken from a rom for my phone - brand and model must be right on the stock
firmware/rom or you risk damaging you phone (DO NOT CHEAT PLZ)
ps:wen you unpack the firmware/rom you should get a .pac file
ps:finding my stock rom took me several days of search.
now for STAGE 2 i had a stock recovery a needed to change it
for twrp another few days of search i came across a site
called hovatek here i found a tool to port (change) the
stock recovery to boot the twrp recovery the tool name is
[Hovatek] Spreadtrum (SPD) Auto TWRP Recovery Porter V1.0 by Team Hovatek (x86)
i run my stock recovery with this tool the tool creates a modified recovery on the
output folder( a few kb bigger ) stage 2 done.
STAGE 3
1- a fully working ADB, for this your best option is android-studio
2-turn on USB debuging and OEM unlock in DEV options
3-name the new recovery file recovery.img
4-your device has to be in USB MTP mode
5-if ADB is properly installed and Windows has the correct android device
driver you should be able to use these commands using android-studio's ADB
command-adb devices
-if the device is detected a serial number apears
command-adb reboot bootloader
-the device reboots to a black screen with small white letters saying FASTBOOT mode
command-fastboot devices
-the device displays the serial number again
command-fastboot flash recovery recovery.img
- if all went well it will say successful
command-fastboot reboot
-dont remenber if it booted straight to twrp or if i had to use power + volume up
-by the way on my phone to get in the default recover its 1 second hold power
and then with the power pressed for 1 sec add volume up 3 sec and let go of both
any way it worked i hope it helps ppl with these sc7731c phones
i have twrp 3.0.0 fully working
tips: youtube vídeos on how to use SPD_Upgrade_Tool_R4.0.0001
the hovatek site has a great tutorial on how to use the recovery porter tool
the last part the ADB commands was a ***** as Windows did not install my device
correctly and this is crucial -install phone driver manualy/Google device/Google android device. good luck
ps: all merit goes to the developers of these tool, a great ty to them :highfive:
ps: at the start i did NOT have root, the success flashing the ported twrp recovery
was followed bi the installation of the magisk15.3.zip and voila twrp+root
any one help me i port twrp using adb but after i flash my twrp upside down on sc7731ceb it works fine but the twrp upside down any help me
pauljack2 said:
any one help me i port twrp using adb but after i flash my twrp upside down on sc7731ceb it works fine but the twrp upside down any help me
Click to expand...
Click to collapse
humm,.. as far as i now adb does not port recovery image´s you mean you found an image for sc7731?? phone and there are at least 4 or 5 variations of the sc7731 board and you
flashed it on your phone, by shear luck you did not soft-brick or brick your phone and it actualy Works, :cyclops:
you need to search Google/xda/hovatek site for your brand and model´s stock recovery or even better your custom recovery
or as an alternative your stock ROM/FIRMWARE and then extract the stock recovery from ROM/FIRM port it and flash it
im prety shure someone out there has a phone like your´s and you can , when you find it download the stock recovery - the custom recovery - or the ROM/FIRMWARE file
the hovatek site has a great auto port tool all you need is your stock recovery follow the vídeo simple steps and flash it now that you have root just use
twrp oficial app to flash it ,se my tutorial above it will be easy once you have the stock recovery or rom/firmware
i have a 50 buck cheap phone wierd brand,it took me several days to find the stock rom/firmware once i did all worked just fine no strange stuff
hovetek site also has a lot of rom´s/firmware files for many brands and model´s , again search Google/xda/hovatek for your model + stock recovery or recovery.img, custom recovery.
good luck
i have stock recovery so i copy the recovery from my stock and i use carlivimg so i can unpack my recovery.img but i have really problem on upside down but i work fine i flash supersu on it now i have rooted my phone. my phone by the way is ding ding defi go SC7731ceb i use TWRP 3.0.2.0 it works fine but if you update the latest twrp you have problem on failed mount and .etc
ANY can help that upside down ??? thats my problem now on my recovery
but you can port recovery using fastboot
i commend
c:/adb>adb devices
adb>adb reboot bootleader
adb>fastboot flash recovery recovery.img
thats i port my recovery on sc7731ceb
using pc
pauljack2 said:
i have stock recovery so i copy the recovery from my stock and i use carlivimg so i can unpack my recovery.img but i have really problem on upside down but i work fine i flash supersu on it now i have rooted my phone. my phone by the way is ding ding defi go SC7731ceb i use TWRP 3.0.2.0 it works fine but if you update the latest twrp you have problem on failed mount and .etc
ANY can help that upside down ??? thats my problem now on my recovery
but you can port recovery using fastboot
i commend
c:/adb>adb devices
adb>adb reboot bootleader
adb>fastboot flash recovery recovery.img
thats i port my recovery on sc7731ceb
using pc
Click to expand...
Click to collapse
Go here https://forum.hovatek.com/thread-21669.html try and port again with this tool it worked fine for me.
TWRP for sc7731c hope it helps
hi all a have a sc7731c phone on android 6.0 and i was able to install twrp on my device
it all started when i found a stock rom on the web (Google your device for stock - rom or - firmware)
once i had the rom i started searching for a way to extract the stock recovery from the rom
and i found this tool SPD_Upgrade_Tool_R4.0.0001 using this tool i extracted my stock
recovery from the ROM ( recovery.img ) , first stage complete i had a stock recovery
taken from a rom for my phone - brand and model must be right on the stock
firmware/rom or you risk damaging your phone (DO NOT CHEAT PLZ)
ps:when you unpack the firmware/rom you should get a .pac file
ps:finding my stock rom took me several days of search.
now for STAGE 2 i had a stock recovery a needed to change it
for twrp another few days of search i came across a site
called hovatek here i found a tool to port (change) the
stock recovery to boot the twrp recovery the tool name is
[Hovatek] Spreadtrum (SPD) Auto TWRP Recovery Porter V1.0 by Team Hovatek (x86)
i PORT my stock recovery with this tool the tool creates a modified recovery on the
output folder( a few kb bigger ) stage 2 done.
STAGE 3
1- a fully working ADB, for this your best option is android-studio
2-turn on USB debuging and OEM unlock in DEV options
3-name the new recovery file recovery.img
4- place the new ported recovery.img in the adb
installation folder ( c:\platform-tools-latest-windows\platform-tools )
5-your device has to be in USB MTP mode
6-if ADB is properly installed and Windows has the correct android device
driver you should be able to use these commands using android-studio's ADB
command- adb devices
-if the device is detected a serial number apears
command- adb reboot bootloader
-the device reboots to a black screen with small white letters saying FASTBOOT mode
command- fastboot devices
-the device displays the serial number again
command- fastboot flash recovery recovery.img
- if all went well it will say successful
command- fastboot reboot
-dont remenber if it booted straight to twrp or if i had to use power + volume up
-by the way on my phone to get in the default recover its 1 second hold power
and then with the power pressed for 1 sec add volume up 3 sec and let go of both
any way it worked i hope it helps ppl with these sc7731c phones
i have twrp 3.0.0 fully working (My Model - Selecline/Auchan s6s4in3g)
tips: youtube vídeos on how to use SPD_Upgrade_Tool_R4.0.0001
the hovatek site has a great tutorial on how to use the recovery porter tool
the last part the ADB commands was a ***** as Windows did not install my device
correctly and this is crucial -install phone driver manualy/Google device/Google android device. good luck
ps: all merit goes to the developers of these tools, a great ty to them
ps: at the start i did NOT have root, the success flashing the ported twrp recovery
was followed by the installation of the magisk15.3.zip and voila twrp+root
Here is a Ready twrp 3.1.1-0 recovery for SELECLINE/AUCHAN S6S4IN3G
(WARNING)do not flash it on any other brand or model IM NOT TO BLAME
Enjoy https://drive.google.com/file/d/1n2crfK7qkEc0G5ZjsUQRD02YMNb_MLGw/view?usp=sharing
step 1 - here is a tutorial on how to unpack the rom/firmware and get the stock recovery.img https://forum.hovatek.com/thread-6236.html
ps:in the tutorial he is using na older version of the tool ,the newer versions looks exactly the same as the SPD_Upgrade_Tool_R4.0.0001
step 2 - here is a vídeo tutorial on how to use the twrp porter , it modifies your stock recovery to boot twrp https://forum.hovatek.com/thread-21669.html#.Wlcd9W4qhkE.facebook
step 3 - how to properly install android studio (aka ADB ) vídeo tutorial https://www.youtube.com/watch?v=0ccUcPR2Mko
PS:all credit bellongs to the wonderfull ppl that created these fine android tools thank them/donate to them if you can
Thank you for this! Followed your instructions and tweaked it a little bit. Made my own TWRP and finally my I root(ed?) my lesser known phone. My phone is rooted and I learned something. Again, thank you so much!!!
florain03 said:
Thank you for this! Followed your instructions and tweaked it a little bit. Made my own TWRP and finally my I root(ed?) my lesser known phone. My phone is rooted and I learned something. Again, thank you so much!!!
Click to expand...
Click to collapse
its awsome when one understands it and can do it himself, enjoy your root :good:
In the Hovatek application, you can cheat your TWRP version. I don't know if it's working on other devices instead of using a lollipop version you can use Marshmallow version.
phonedriller said:
TWRP for sc7731c hope it helps
hi all a have a sc7731c phone on android 6.0 and i was able to install twrp on my device
it all started when i found a stock rom on the web (Google your device for stock - rom or - firmware)
once i had the rom i started searching for a way to extract the stock recovery from the rom
and i found this tool SPD_Upgrade_Tool_R4.0.0001 using this tool i extracted my stock
recovery from the ROM ( recovery.img ) , first stage complete i had a stock recovery
taken from a rom for my phone - brand and model must be right on the stock
firmware/rom or you risk damaging your phone (DO NOT CHEAT PLZ)
ps:when you unpack the firmware/rom you should get a .pac file
ps:finding my stock rom took me several days of search.
now for STAGE 2 i had a stock recovery a needed to change it
for twrp another few days of search i came across a site
called hovatek here i found a tool to port (change) the
stock recovery to boot the twrp recovery the tool name is
[Hovatek] Spreadtrum (SPD) Auto TWRP Recovery Porter V1.0 by Team Hovatek (x86)
i PORT my stock recovery with this tool the tool creates a modified recovery on the
output folder( a few kb bigger ) stage 2 done.
STAGE 3
1- a fully working ADB, for this your best option is android-studio
2-turn on USB debuging and OEM unlock in DEV options
3-name the new recovery file recovery.img
4- place the new ported recovery.img in the adb
installation folder ( c:\platform-tools-latest-windows\platform-tools )
5-your device has to be in USB MTP mode
6-if ADB is properly installed and Windows has the correct android device
driver you should be able to use these commands using android-studio's ADB
command- adb devices
-if the device is detected a serial number apears
command- adb reboot bootloader
-the device reboots to a black screen with small white letters saying FASTBOOT mode
command- fastboot devices
-the device displays the serial number again
command- fastboot flash recovery recovery.img
- if all went well it will say successful
command- fastboot reboot
-dont remenber if it booted straight to twrp or if i had to use power + volume up
-by the way on my phone to get in the default recover its 1 second hold power
and then with the power pressed for 1 sec add volume up 3 sec and let go of both
any way it worked i hope it helps ppl with these sc7731c phones
i have twrp 3.0.0 fully working (My Model - Selecline/Auchan s6s4in3g)
tips: youtube vídeos on how to use SPD_Upgrade_Tool_R4.0.0001
the hovatek site has a great tutorial on how to use the recovery porter tool
the last part the ADB commands was a ***** as Windows did not install my device
correctly and this is crucial -install phone driver manualy/Google device/Google android device. good luck
ps: all merit goes to the developers of these tools, a great ty to them
ps: at the start i did NOT have root, the success flashing the ported twrp recovery
was followed by the installation of the magisk15.3.zip and voila twrp+root
Here is a Ready twrp 3.1.1-0 recovery for SELECLINE/AUCHAN S6S4IN3G
(WARNING)do not flash it on any other brand or model IM NOT TO BLAME
Enjoy https://drive.google.com/file/d/1xiTuMA-8bGgY0wuulpljVawNWXrujx0F/view?usp=sharing
Click to expand...
Click to collapse
Hey, do you still have this recovery? I had this phone lying around and wanted to mess around with it, thanks in advance
here you go .
hope it helps - https://drive.google.com/file/d/1n2crfK7qkEc0G5ZjsUQRD02YMNb_MLGw/view?usp=sharing
phonedriller said:
hope it helps - https://drive.google.com/file/d/1n2crfK7qkEc0G5ZjsUQRD02YMNb_MLGw/view?usp=sharing
Click to expand...
Click to collapse
Thanks so much man, I've been pulling my hair trying to figure how to root this thing. You're the best. Do you know if there are any roms for it? maybe ported?
Thank you so much man, I can confirm this works with myphone a5!!!!
A different phone but same chip.
i have no image in the recovery, butyou can access it by adb anyway following this thread:
i have magisk now time to unninstall gapps!!!!
fastboot doesn't work to me anyway, I don't know why but it is the truth. may u can help me?
So many thanks for you work! I'd use your TWRP as base and ported it to the Wiko Sunny 2. The only problem is that touch input doesn't work well, it receives touches all the time.
I have an E504 with android 8.1.0 go edition, I accidentally deleted family photos and I need to recover them, for that I need to root the cell phone, you can do it or do you know how I can do it or who does it?
facamasi said:
I have an E504 with android 8.1.0 go edition, I accidentally deleted family photos and I need to recover them, for that I need to root the cell phone, you can do it or do you know how I can do it or who does it?
Click to expand...
Click to collapse
1. Flash TWRP what is at 100% suitable to your phone
2. Download SuperSU
3. Flash SuperSU by means of TWRP
0