Today , i'm presenting to you the first nougat for Blu vivo 5 and clones...
The rom is very fast ans smooth , stable enaugh for daily use ...
Bugs :
Camera 8mp only , and video recording (use Camu or cameringo to record video for now )
Downlaod :
for blu vivo 5 , you will get unknown baseband ,, for other clones it works very well , hope someone upload a working version for blu vivo 5
here
Flash it with this recovery
pixel mod
here
Screenshots :
see attachement
Kernel : 3.18.19
Credits :
me for porting
LineageOS comunity
Iacob Ionut and Omar Zaid from Gionee s plus/s6pro mt6753 facebook group for support
Jhonny Xda for the rom i ported
AMT team for aosp nougat which i edited its boot.img...
XDA:DevDB Information
LineageOS 14.1 , ROM for the Blu Vivo 5
Contributors
Mechalikh
ROM OS Version: 7.x Nougat
ROM Firmware Required: Marshmallow
Based On: LineageOS
Version Information
Status: Stable
Current Stable Version: 1
Stable Release Date: 2017-02-19
Created 2017-02-19
Last Updated 2017-02-20
Downloaded, backing up now. Will report back with feedback!
victorvscn said:
Downloaded, backing up now. Will report back with feedback!
Click to expand...
Click to collapse
okey , i will wit for other nougat roms right now , because video recording is on other roms too , so try using third party apps , till we find a good solution..
Mechalikh said:
okey , i will wit for other nougat roms right now , because video recording is on other roms too , so try using third party apps , till we find a good solution..
Click to expand...
Click to collapse
It's throwing an error. I think it's because of system mountpoint. Here's VIVO's 5 fstab:
Code:
# Android fstab file.
#<src> <mnt_point> <type> <mnt_flags and options> <fs_mgr_flags>
# The filesystem that contains the filesystem checker binary (typically /system) cannot
# specify MF_CHECK, and must come before any filesystems that do specify MF_CHECK
/dev/block/platform/mtk-msdc.0/by-name/system /system ext4 ro wait
/dev/block/platform/mtk-msdc.0/by-name/userdata /data ext4 noatime,nosuid,nodev,noauto_da_alloc,discard wait,check,resize,encryptable=/dev/block/platform/mtk-msdc.0/by-name/metadata
/dev/block/platform/mtk-msdc.0/by-name/cache /cache ext4 noatime,nosuid,nodev,noauto_da_alloc,discard wait,check
/dev/block/platform/mtk-msdc.0/by-name/protect1 /protect_f ext4 noatime,nosuid,nodev,noauto_da_alloc,commit=1,nodelalloc wait,check,autoformat
/dev/block/platform/mtk-msdc.0/by-name/protect2 /protect_s ext4 noatime,nosuid,nodev,noauto_da_alloc,commit=1,nodelalloc wait,check,autoformat
/dev/block/platform/mtk-msdc.0/by-name/nvdata /nvdata ext4 noatime,nosuid,nodev,noauto_da_alloc,discard wait,check,autoformat
#please add cip or persist on project fstab
#/dev/block/platform/mtk-msdc.0/by-name/persist /persist ext4 noatime,nosuid,nodev,noauto_da_alloc,commit=1,nodelalloc wait,check,autoformat
#/dev/block/platform/mtk-msdc.0/by-name/custom /custom ext4 ro wait
/devices/mtk-msdc.0/11230000.MSDC0 auto vfat defaults voldmanaged=sdcard0:[email protected],noemulatedsd
/devices/mtk-msdc.0/11240000.MSDC1 auto vfat defaults voldmanaged=sdcard1:auto
/devices/platform/mt_usb auto vfat defaults voldmanaged=usbotg:auto
/dev/block/platform/mtk-msdc.0/by-name/frp /persistent emmc defaults defaults
and here's what you're trying to mount:
Code:
mount("ext4", "EMMC", "/dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/system", "/system", "");
victorvscn said:
It's throwing an error. I think it's because of system mountpoint. Here's VIVO's 5 fstab
Click to expand...
Click to collapse
it is from recovery , use the recovery i uploded yesterday
I see. Will do.
---------- Post added at 11:15 ---------- Previous post was at 10:31 ----------
Very responsive. Animations are beautiful. Didn't test camera yet. Lost IMEI, so currently trying the MAUI method. Having trouble to get MAUI to recognize the phone. Any tips?
---------- Post added at 11:35 ---------- Previous post was at 11:15 ----------
Also getting a NVRAM WARNING: Err = 0x10 on Wifi. This looks like it should help:
https://forum.xda-developers.com/showthread.php?t=2730486
I haven't been able to restore the IMEI, unfortunately. I tried using SN Write Tool (didn't recognize the MDDB) and Maui META (it turned on the phone, but couldn't "freeze" it before boot). Exact error message was "It cannot find the Kernal USB comport for AP and Modem handshake."
The ROM is great but IMEI is a must. I backed up the ROM for further testing, but for now went back to my previous one.
Nice. Thanks for upload. I will test it.
Edit: Works great. The only problem is like victorvscn with the Imei. Also, I have the NVRAM Warning error and isn't solve with the Fix Wifi files. I only can use other Wifi red instead of my wifi red
Edit 2: I restarted my modem and connected to my Wifi.
this is working fine on my algerian clone "Condor a55 slim" , so i need help making a rom for blu vivo 5 , so there will be two links one for blu vivo 5 and otther for the other clones... hope someone helps
try replacing from stock rom
etc/firmware (first delete this folder and then past yours)
etc/mddb (same thing ,delete before pasting)
etc/apns***.xml (all xml files containing apns in the name)
Mechalikh said:
this is working fine on my algerian clone "Condor a55 slim" , so i need help making a rom for blu vivo 5 , so there will be two links one for blu vivo 5 and otther for the other clones... hope someone helps
try replacing from stock rom
etc/firmware (first delete this folder and then past yours)
etc/mddb (same thing ,delete before pasting)
etc/apns***.xml (all xml files containing apns in the name)
Click to expand...
Click to collapse
Ok. I will try.
Mechalikh said:
this is working fine on my algerian clone "Condor a55 slim" , so i need help making a rom for blu vivo 5 , so there will be two links one for blu vivo 5 and otther for the other clones... hope someone helps
try replacing from stock rom
etc/firmware (first delete this folder and then past yours)
etc/mddb (same thing ,delete before pasting)
etc/apns***.xml (all xml files containing apns in the name)
Click to expand...
Click to collapse
Here's the 100% Stock Marshmallow ROM in SP Flash format:
https://drive.google.com/open?id=0B6T1KY-3ETcOYURKUkJuY21UYnM
Imei fixed, now the camera.
Letrix said:
Imei fixed, now the camera.
Click to expand...
Click to collapse
Can you post the contents of your /etc/mddb /etc/firmware and /etc/ap*.xml?
Mine still isn't working and I'm having trouble extracting system.img from the stock ROM.
victorvscn said:
Can you post the contents of your /etc/mddb /etc/firmware and /etc/ap*.xml?
Mine still isn't working and I'm having trouble extracting system.img from the stock ROM.
Click to expand...
Click to collapse
Image of files in attachments.
PD: You can extract system.img with Android Kitchen in Ubuntu
Thanks, looks rather like mine. I got Android Kitchen working and will test again after rebuilding the ROM with the right files.
EDIT: IMEI fixed!
Edit 2: Just adding information for someone else who might need: it didn't work when I swapped the files with the system turned on (via adb shell), even after restarting, but it did work upon doing a clean install and swapping them via TWRP's file manager.
Letrix said:
Imei fixed, now the camera.
Click to expand...
Click to collapse
bro can you upload the rom , so i will add the link
it will be :
one link for blu vivo 5
and another for the clones
please upload the new rom with working RIL and pm me
[/COLOR]
victorvscn said:
Thanks, looks rather like mine. I got Android Kitchen working and will test again after rebuilding the ROM with the right files.
EDIT: IMEI fixed!
Edit 2: Just adding information for someone else who might need: it didn't work when I swapped the files with the system turned on (via adb shell), even after restarting, but it did work upon doing a clean install and swapping them via TWRP's file manager.
Click to expand...
Click to collapse
Works if you swap files via recovery.
Mechalikh said:
bro can you upload the rom , so i will add the link
it will be :
one link for blu vivo 5
and another for the clones
please upload the new rom with working RIL and pm me
Click to expand...
Click to collapse
Ok. I will try.
Letrix said:
Ok. I will try.
Click to expand...
Click to collapse
great , i want to add it in thread ,
because blu vivo 5 ,is deffierent ( baseband)
so we will provide two links , one for blu vivo 5 , and one for other clones
I can't fix anything. Only Imei is working well.
Bugs:
Camera doesn't work.
Headphones doesn't work.
NVRAM Error in Wifi Settings.
Features than doesn't works are present (like fingerprint scanner, live display, etc.)
Here are files for fix Imei. You need to extract on Internal Storage. Enter TWRP, mount System partition, go to recovery file manager and copy&paste system folder to root directory (/).
https://www.mediafire.com/?ide56usmej7kz9r
Related
I bought a IUNI U3 recently and found two recoveries for the device. There is only these two builds.
I bought the device to try something new and I wanted to translate the IUNI OS ROM.
Problem is: The CWM recovery is non touch and has a bug which causes backups not to work. The TWRP is version 2.8.3 and me and a friend of mine managed to get rid of an overheating bug by adding
other default governors for the recovery (setting on demand instead of performance). Still I have some trouble with this recovery, but it is the only thing I got.
If I want to flash a ROM with it I get errors.
Code:
msm.boot_update("backup");
msm.boot_update("finalize");
in the updater script gives me a
Code:
line 108 col 26: unknown function "msm.boot_update"
line 109 col 28: unknown function "msm.boot_update"
2 parse errors
using TWRP while CWM flashes the ZIP without a problem.
If I remove
Code:
ui_print("Patching firmware images...");
package_extract_file("firmware-update/tz.mbn", "/dev/block/platform/msm_sdcc.1/by-name/tz");
package_extract_file("firmware-update/sbl1.mbn", "/dev/block/platform/msm_sdcc.1/by-name/sbl1");
package_extract_file("firmware-update/rpm.mbn", "/dev/block/platform/msm_sdcc.1/by-name/rpm");
package_extract_file("firmware-update/emmc_appsboot.mbn", "/dev/block/platform/msm_sdcc.1/by-name/aboot");
msm.boot_update("backup");
msm.boot_update("finalize");
package_extract_file("firmware-update/NON-HLOS.bin", "/dev/block/platform/msm_sdcc.1/by-name/modem");
package_extract_file("firmware-update/splash.bin", "/dev/block/platform/msm_sdcc.1/by-name/splash");
unmount("/system");
from the updater script (deleting the /firmware folder in the zip of course) TWRP flashes the ZIP without a problem like CWM does.
Is there a problem within the TWRP build or is this related to the updater binary?
Or is this command being processed correctly by the stock recovery only?
I am kind of a beginner and I wondered if someone could give me some advice so I do not have to remove the radio update.
Btw: the cooks of the mentioned recoveries are russians and I got no response until now. On 4PDA ru I can not register etc etc.
Regarding IUNI U3
Hello t-ryder,
I am sorry I cannot help you with that. I have IUNI U3 for 6 months now. I am sadly using Chinese CWM :crying: and I think I tried restoring backup once and was ok. I tried TWRP once when I bought it and it failed in installing update package so I returned back to chinese CWM.
I am currently stuck at ROM BetaV2.0 20150105. When I tried to update to Beta 3.0 It got stuck at IUNI logo because of problem with Xposed. The IUNIOS use Xposed in their ROM unofficially like MIUI did and they moved forward to blow the Xposed installation in new ROMs. Some OnePlus one users spotted Xposed working for IUNIOS Beta3 custom rom and I did not know how they did it, or may be it is broken for IUNI U3 only.
Can you tell me which ROM you installed and if Xposed is working? Which GApps you use?
The only source I found for IUNI U3 was the chinses official forums. Can you tell me if you found any other sources?
Thanks
t-ryder said:
If I want to flash a ROM with it I get errors.
Code:
msm.boot_update("backup");
msm.boot_update("finalize");
in the updater script gives me a
Code:
line 108 col 26: unknown function "msm.boot_update"
line 109 col 28: unknown function "msm.boot_update"
2 parse errors
using TWRP while CWM flashes the ZIP without a problem.
Click to expand...
Click to collapse
The updater-script is parsed by the update-binary (which communicates with the recovery only for UI updates), so it's hard to imagine why it would work in one recovery but not in the other.
Thanks for your reply.
Thought of something like that.
When I get a new build ready I am gonna try an older updater-binary.
I heard that some builds of TWRP have problems with newer updater-binaries for some devcies.
t-ryder said:
Thanks for your reply.
Thought of something like that.
When I get a new build ready I am gonna try an older updater-binary.
I heard that some builds of TWRP have problems with newer updater-binaries for some devcies.
Click to expand...
Click to collapse
Sounds like or the updater binary has no implementation of the msm.bootupdater function or maybe you need some binary of /bin folder that has this function.
You can decompress the boot image from recovery.img and compare to the CWM boot image if there is any missing binary that has this function.
prof_mastermind said:
Hello t-ryder,
I am sorry I cannot help you with that. I have IUNI U3 for 6 months now. I am sadly using Chinese CWM :crying: and I think I tried restoring backup once and was ok. I tried TWRP once when I bought it and it failed in installing update package so I returned back to chinese CWM.
I am currently stuck at ROM BetaV2.0 20150105. When I tried to update to Beta 3.0 It got stuck at IUNI logo because of problem with Xposed. The IUNIOS use Xposed in their ROM unofficially like MIUI did and they moved forward to blow the Xposed installation in new ROMs. Some OnePlus one users spotted Xposed working for IUNIOS Beta3 custom rom and I did not know how they did it, or may be it is broken for IUNI U3 only.
Can you tell me which ROM you installed and if Xposed is working? Which GApps you use?
The only source I found for IUNI U3 was the chinses official forums. Can you tell me if you found any other sources?
Thanks
Click to expand...
Click to collapse
On 4PDA ru there are some devs working on stuff for the U3. I have never used Xposed on the U3. Last stable build is b3.0.5 - b3.0.6 is so buggy, I wonder why the IUNI dev team even released that crap.
I managed to flash the b3.0.5 using TWRP changing the updater script removing the device check and the radio update.
delete (in updater script for b3.0.6)
Code:
getprop("ro.product.device") == "IUNI" || abort("This package is for \"IUNI\" devices; this is a \"" + getprop("ro.product.device") + "\".");
and
Code:
# ---- radio update tasks ----
ui_print("Patching firmware images...");
package_extract_file("firmware-update/tz.mbn", "/dev/block/platform/msm_sdcc.1/by-name/tz");
package_extract_file("firmware-update/sbl1.mbn", "/dev/block/platform/msm_sdcc.1/by-name/sbl1");
package_extract_file("firmware-update/rpm.mbn", "/dev/block/platform/msm_sdcc.1/by-name/rpm");
package_extract_file("firmware-update/emmc_appsboot.mbn", "/dev/block/platform/msm_sdcc.1/by-name/aboot");
msm.boot_update("backup");
msm.boot_update("finalize");
package_extract_file("firmware-update/NON-HLOS.bin", "/dev/block/platform/msm_sdcc.1/by-name/modem");
package_extract_file("firmware-update/splash.bin", "/dev/block/platform/msm_sdcc.1/by-name/splash");
unmount("/system");
Updating the radio once was enough (since I tried to translate the ROM and flashed the build over and over again to test).
Here is the thread on 4PDA ru - try reading using bing translator and if you want to dl something switch to original site view.
http://4pda.ru/forum/index.php?showtopic=598571
Me and my pal hellsgod edited the TWRP since there was a problem with the governors overheating the chip on performance gov.
Here the edited recovery build (originally compiled by evil goodd @ 4PDA ru)
Thanks T-ryder
t-ryder said:
On 4PDA ru there are some devs working on stuff for the U3. I have never used Xposed on the U3. Last stable build is b3.0.5 - b3.0.6 is so buggy, I wonder why the IUNI dev team even released that crap.
I managed to flash the b3.0.5 using TWRP changing the updater script removing the device check and the radio update.
delete (in updater script for b3.0.6)
Code:
getprop("ro.product.device") == "IUNI" || abort("This package is for \"IUNI\" devices; this is a \"" + getprop("ro.product.device") + "\".");
and
Code:
# ---- radio update tasks ----
ui_print("Patching firmware images...");
package_extract_file("firmware-update/tz.mbn", "/dev/block/platform/msm_sdcc.1/by-name/tz");
package_extract_file("firmware-update/sbl1.mbn", "/dev/block/platform/msm_sdcc.1/by-name/sbl1");
package_extract_file("firmware-update/rpm.mbn", "/dev/block/platform/msm_sdcc.1/by-name/rpm");
package_extract_file("firmware-update/emmc_appsboot.mbn", "/dev/block/platform/msm_sdcc.1/by-name/aboot");
msm.boot_update("backup");
msm.boot_update("finalize");
package_extract_file("firmware-update/NON-HLOS.bin", "/dev/block/platform/msm_sdcc.1/by-name/modem");
package_extract_file("firmware-update/splash.bin", "/dev/block/platform/msm_sdcc.1/by-name/splash");
unmount("/system");
Updating the radio once was enough (since I tried to translate the ROM and flashed the build over and over again to test).
Here is the thread on 4PDA ru - try reading using bing translator and if you want to dl something switch to original site view.
http://4pda.ru/forum/index.php?showtopic=598571
Me and my pal hellsgod edited the TWRP since there was a problem with the governors overheating the chip on performance gov.
Here the edited recovery build (originally compiled by evil goodd @ 4PDA ru)
Click to expand...
Click to collapse
Thank You T-ryder. I do not think Xposed will work for all these versions (they all have the same modified app_process) and I need it for many apps. By the way, there is a new version of firmware and it is only available in Chinese forums. its release date is 20150514 and it is recomended from the posts on the IUNI forums. The download link:
http://pan.baidu.com/s/1sj2txz3
pass: hsf2
Also 4PDA.ru looks interesting, I am already registered but I could not login because of the Russian handwriting capatcha
I need to upgrade the baseband of course, but I need Xposed as well so I am stuck. The strange thing that I saw OPO IUNI v3 ROM with Xposed installed and probably working!!
prof_mastermind said:
Thank You T-ryder. I do not think Xposed will work for all these versions...
Click to expand...
Click to collapse
Thanks. Did'nt know about the newer release. I just looove downloading from baidu...
atm I am using a MIUI v6 port by ry09iu modified by me (I call it MIUNI).
This is getting more and more OT, sry.
I tried to download the 20150514 ROM maybe like 10 times now. No succes. F*** baidu.
Could you mirror it for me? I want to have a look at the updater binary and the updater script (and maybe try the ROM itself).
btw...
I even got a crowdin repo for the german translation... but translating the whole OS is such a pain in the a**.
Just downloaded it
t-ryder said:
This is getting more and more OT, sry.
I tried to download the 20150514 ROM maybe like 10 times now. No succes. F*** baidu.
Could you mirror it for me? I want to have a look at the updater binary and the updater script (and maybe try the ROM itself).
btw...
I even got a crowdin repo for the german translation... but translating the whole OS is such a pain in the a**.
Click to expand...
Click to collapse
I have had the same problem of Baidu, I just successfully downloaded this ROM. Also I downloaded MIUI 6.0 v5.7.2 by Ry09iu if you want it. I will upload it to google drive and share the link.
Here the links
For the IUNI U3 20150514
https://drive.google.com/file/d/0B01YRIH4QUaBLUMxT2xXWlY2Q3c/view?usp=sharing
For The MIUI v5.7.2
https://drive.google.com/file/d/0B01YRIH4QUaBUENDR3dhNWpXcUk/view?usp=sharing
I hope it would help...........................
hi guys
comming from nubia z7 max and have now a iuni u3.
how can i download roms from the iuni baidu page
registation not working?
sorry for my funny english
andreas
prof_mastermind said:
I have had the same problem of Baidu, I just successfully downloaded this ROM. Also I downloaded MIUI 6.0 v5.7.2 by Ry09iu if you want it. I will upload it to google drive and share the link.
Click to expand...
Click to collapse
I just sold the IUNI... was fed up by this device and everything regarding it.
Burnin-Andy said:
hi guys
comming from nubia z7 max and have now a iuni u3.
how can i download roms from the iuni baidu page
registation not working?
sorry for my funny english
andreas
Click to expand...
Click to collapse
Here What I did, of course with the help of google translate:
1. Create A QQ acount from imqq.com
2. Use your QQ account to login Baidu and choose to transfere the files you want to download to your Baidu Cloud (using the right arrow sign ==>)
Note: In Egypt pan.baidu.com links are not opening even with proxies (give 404 error) with some of ISPs so I had to view these links with a different ISP!
3. Use Baidu Program to download the files (It works from any ISP) the program name is: BaiduYun
BaiduYunGuanjia_5.2.7.exe you can google it. you need to login with the same QQ account and it will show the files on your Baidu cloud and you can choose to download any of them (download sign in chinese is like a capital T with a small slash \ at its leg )
Hope this helps
prof_mastermind said:
For the IUNI U3 20150514
https://drive.google.com/file/d/0B01YRIH4QUaBLUMxT2xXWlY2Q3c/view?usp=sharing
For The MIUI v5.7.2
https://drive.google.com/file/d/0B01YRIH4QUaBUENDR3dhNWpXcUk/view?usp=sharing
I hope it would help...........................
Click to expand...
Click to collapse
Have you successfully flashed GAPPS on the latest IUNI beta rom? If so, what package did you use?
I'm having problems installing g-apps on iuni os as well. The phone always hang at welcome screen because settings crashes.
I'm currently using MIUI os, but prefer the iuni os.
wonderbao said:
I'm having problems installing g-apps on iuni os as well. The phone always hang at welcome screen because settings crashes.
I'm currently using MIUI os, but prefer the iuni os.
Click to expand...
Click to collapse
If you are using IUNI OS v2, you need to remove SetupWizard.apk from /system/priv-app after flashing, or remove it from the GAPPS zip prior to flashing.
I had Gapps working fine on the previous (buggy?) IUNI OS v3, but after upgrading to this one, I can flash the GAPPS package fine but the apps don't appear to be installed. Weird!
mikeysteele said:
If you are using IUNI OS v2, you need to remove SetupWizard.apk from /system/priv-app after flashing, or remove it from the GAPPS zip prior to flashing.
I had Gapps working fine on the previous (buggy?) IUNI OS v3, but after upgrading to this one, I can flash the GAPPS package fine but the apps don't appear to be installed. Weird!
Click to expand...
Click to collapse
Thank you for your reply.
I now have the same problem as you, after flashing GAPPS, none of the apps appear.
Am using MIUI os from the link above right now.
Let me know if you find a solution.
wonderbao said:
Thank you for your reply.
I now have the same problem as you, after flashing GAPPS, none of the apps appear.
Am using MIUI os from the link above right now.
Let me know if you find a solution.
Click to expand...
Click to collapse
Problem is there's not enough space left on the system partition to flash gapps on the latest IUNI OS v3 beta
mikeysteele said:
Problem is there's not enough space left on the system partition to flash gapps on the latest IUNI OS v3 beta
Click to expand...
Click to collapse
The IUNI V3.0 ROM I shared on Google Drive is the latest production version not beta, it is better than Beta 3.06 because WhatsApp is working and it is the latest basband/firmware.
For the problem of the insufficient disk space, I have a solution:
There is a folder in most of official ROMs that you can remove safely (/system/sdcard), it contains the promotion videos and songs for IUNI U3. They are copoied to emulated storage during rom installation so they are not needed anymore because they are already there.
Delete this folder (need Root Access and file manager like Root Explorer) then there will not be space problem again (it is 250MB). Install The latest GAPPS by TKruzze, use mini/micro/pico no problem. I used pa_gapps-modular-pico-4.4.4-20150308-signed.zip and works perfectly. Here are new download page after TKruzze closed the thread:
http://www.androidrootz.com/2015/03/download-android-44x-kitkat-pa-gapps.html
Galaxy S6 V2.0 Looks like Lollipop 5.1.1 for MicroMaX A310 (MTK6592)
[SUPERFAST] [SUPERBATTERYBACKUP]
-Latest Android 4.4.2
-Latest Android 4.4.2 Stock Camera with Gallery with 16 MP front & rear camera
-Good Battery Backup
-Playing Games Smoothly
-Buttery Smooth
-Settings themed
-New Status Bar
-3G SIM Switch
-Sim Toolkit
-New Bootlogo
-Init.d Scripts
-Latest Playstore
-New LockScreen
-New Dialer
-New Contacts
-New Messages
And Many More.........
Bugs :
Tell if you see any more....
Installation :
How To Flash :
( You Can Take Recovery Backup for Revert back to your old system )
1) Download ROM zip File below link
2) Put into External/Internal SD Card
3) Go To Recovery
4) Wipe Data/Factory Reset
5) Wipe Cache
6) From Advance Menu Do Delvik Cache Clear
7) Go in Mount And Storage select FORMAT SYSTEM
8) Select Install From SD and Select file And Click YES
9) Select ROM zip And Select YES
10) Reboot
11) Congrats You have Rom now....Report if you find bugs
(It will take around 5 Min. for first boot)
Screen Shots
If flashing CUSTOM BASED ROM destruction in whatsoever in your world, neither me, nor any of my dev brothers and not even WEB OR FORUM SITE is responsible for that.
You are the one who has choosen to modify your phone and so all risk and durability is your only, no one
Original ROM Developer :- www.movilesdualsim.com
(credits : pocarropa, NeedRom, xda developers, 4pda.net . If I forgot a any developer name please suggest me I will add defiantly & Swapnil Bunjkar )
Credits & Big Thanks :
Micromax - For his Kernel for MTK6592.
All things happen because of all above users, developers and forums, so give Thanks and Credit them,
I am not developer I am just Porter.
DOWNLOADS
Customroms.theSwapnil.cOM
XDA:DevDB Information
Galaxy S6 V2.0 Looks like Lollipop 5.1.1 for MicroMaX A310 (MTK6592) [SUPERFAST] [SUP, ROM for the Micromax Canvas Nitro A310/A311
Contributors
theswapnil
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Version Information
Status: Stable
Created 2015-10-19
Last Updated 2015-10-19
where is the download link...... dont scam here bro...
I am not Scaming bro
rohheat said:
where is the download link...... dont scam here bro...
Click to expand...
Click to collapse
download link is in bottom of post, usersfiles , just like or +1 or tweet so simple and u get download link.
not installed
i never excpeted that much from u guys
i tried with every possible recovery
i downloaded this rom thrice
u guys have no idea
i m dying to get this rom
plz sort it out soon plz
the archive is damaged mate please reupload the correct one mate
plz upload it correctly its my humble request
even i repaired the archive using winrar by following this tutorial https://youtu.be/3i6PIVZPRBA and after that its opening fine in my pc but when i flash it in my phone ( MMX A310) it says the archive is damaged
karthik4 said:
even i repaired the archive using winrar by following this tutorial https://youtu.be/3i6PIVZPRBA and after that its opening fine in my pc but when i flash it in my phone ( MMX A310) it says the archive is damaged
Click to expand...
Click to collapse
ohhh sorry ...
If zip file is corrupted I will upload this file tomorrow (27 oct 2015)
thanks swapnil but plz upload it as soon as possible
When will u upload the rom???
New updated link added full rom WITH NEW DILER AND MORE ....
thanks for the updated link bro
will install and give the feedback
Anyone here got this ROM working on nitro A331??? Reply me how's the experience
the rom is good and works flawlessly
iam using micromax canvas nitro A310
but one thing is in the about phone section the version showa as 5.1.1 but not as 4.4.x as the OP mentioned
thanks for the awesome work bro
some questions:
1.is gps working?
2.can you add/remove tiles from quick settings or they are unchangeable?
3.is xInternal xposed module working?
Same questions as the guy before me asked, I want the gps to work completely...
Thanks man
Im using a311. everything is fine except Sd card.
file explorer (all file explorer) only showing internal sd card and camera saying no space in internal storage. On plugging to PC with Media device internal storage shows full.
please solve this bug other wise its a awsome rom.
AJ KumaR said:
Thanks man
Im using a311. everything is fine except Sd card.
file explorer (all file explorer) only showing internal sd card and camera saying no space in internal storage. On plugging to PC with Media device internal storage shows full.
please solve this bug other wise its a awsome rom.
Click to expand...
Click to collapse
-------------------------------------------------------------------------------------------------------------------------------------
I am using this rom for 3 days now and it works fine. I do not have the issues with SD-card. SD works fine for me. I connect phone trough MTP to the PC and in settings-->Storage --> I selected SD-card for default storage.
GPS is working. I checked with GPS TEST.
ydur1 said:
-------------------------------------------------------------------------------------------------------------------------------------
I am using this rom for 3 days now and it works fine. I do not have the issues with SD-card. SD works fine for me. I connect phone trough MTP to the PC and in settings-->Storage --> I selected SD-card for default storage.
GPS is working. I checked with GPS TEST.
Click to expand...
Click to collapse
In A311??
does your Volume Key and Light Sensor are working??
Now I noticed I'm facing problem after flashing patch for Vol Key and Sensor, For now I just managed to make it working but only when I selected Internal Storage as default storage.
If u Installed any patch and Storage working properly then pls tell me which patch u are using!!!
Thanks
AJ KumaR said:
In A311??
does your Volume Key and Light Sensor are working??
Now I noticed I'm facing problem after flashing patch for Vol Key and Sensor, For now I just managed to make it working but only when I selected Internal Storage as default storage.
If u Installed any patch and Storage working properly then pls tell me which patch u are using!!!
Thanks
Click to expand...
Click to collapse
I have a Coolpad F1 without any Vol patch. I have SDcard as efault storage.
ViperOS for Moto C Plus by DhirajMS
Instructions:
- Download Rom >> Link
- Download arm Gapps from http://opengapps.org
- Flash TWRP-3.2.1 >> Link
- Reboot to recovery and flash rom and then gapps.
- Click Reboot
>>Enjoy>>
All things are working fine for me.... So just flash and enjoy...
Sources >> https://github.com/DhirajSurvase
XDA:DevDB Information
ViperOS-Nougat-Moto-C-Plus-by_DhirajMS, ROM for all devices (see above for details)
Contributors
DhirajMS
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.x
Version Information
Status: Stable
Created 2018-03-31
Last Updated 2018-03-31
Reserved
wow.. downloading now. Big thank OP
Screenshots.
xDoge said:
Screenshots.
Click to expand...
Click to collapse
Kul
Works in Moto C plus 1gb of ram? Is model xt1725
Yes works in 1GB RAM models too.
hi, my phone's charging time is about 4 hours,maybe more (in all your roms) and this is very annoying!!
isn't this unusual?have you any solution for this problem? (i also flashed the kernel, but didn't work)
armin1256 said:
hi, my phone's charging time is about 4 hours,maybe more (in all your roms) and this is very annoying!!
isn't this unusual?have you any solution for this problem? (i also flashed the kernel, but didn't work)
Click to expand...
Click to collapse
use custom kernel:
(it takes around 3 hours for me)
if not working then it's your charger issue>
all the releases from DhirajMS are legit bro i never had any problems
error 6 during installation
hi... i have a error 6 during the installation of the rom... how to solve this error?
Update twrp.
https://forum.xda-developers.com/android/development/twrp-recovery-moto-c-plus-source-build-t3727007
The error has solved!
The ROM is the best! Function all the things and is so fast! Thx... I have another question... In the screen when i block de phone... Appear emergency calles only... But i can do calls without any problem.. How i solve this?
ludaga1989 said:
The ROM is the best! Function all the things and is so fast! Thx... I have another question... In the screen when i block de phone... Appear emergency calles only... But i can do calls without any problem.. How i solve this?
Click to expand...
Click to collapse
Reboot the phone, if the problem persists after reboot your phone contact the developer in the Telegram group
Telegram group: @Moto_c_plus
Does this rom have the option in phone settings " turn off screen during call" .. I have xt1723 2+16gb which doesnt have this feature and am wanting to flash a rom that supports it.
magicali said:
Does this rom have the option in phone settings " turn off screen during call" .. I have xt1723 2+16gb which doesnt have this feature and am wanting to flash a rom that supports it.
Click to expand...
Click to collapse
None of the custom ROM have that feature.
this is for c plus xt1723 2+16gb ?
bro
otg not detecting
but detects on other file managers but cant grant access to otg because otg not detecting in settings > storage
Hi, I have tested all available roms for moto C plus made by DhirajMS but it occurs always freeze and FC. (no offense and thx for your work)
However my device 1Gb/16Gb variant.
I have find on Youtube https://www.youtube.com/watch?v=tHKAY13_BaI a custom rom for Moto C Plus (all versions) with work like a charm with no freeze, good battery and good camera.
I share it to you.
Is It compatible with micro g?
Hi All
Since there is all sorts of development running at the moment and the treble Pie has been put within radar, I thought I make a grouped topic/discussion only for this sGSI version. Some known install procedure, adds and also the pros and cons about this version so everybody can learn.
As I have seen and heared, some users are confused and didn't find all data and files needed to boot, I grouped them here in order and add some other files to finalize what you can do with this version at the moment.
I give all the credits to those who made this possible so far.
Correct me where needed.
Base : https://forum.xda-developers.com/pr...ment/rom-android-p-developer-preview-t3816659 thnx @erfanoabdi
Pre-requirements :
*unlocked bootloader
*B12 Nfound
Files needed :
1. TWRP 3.2.1.8 treble thnx @NFound
2. AXON7_GPT_ADD_VENDOR_800MB.zip @djkuz
3. Project_Treble_v1.1_Axon7-by-NFound.zip @NFound
4. P-PR1-sGSI-Aonly.zip - extract the 7z to the img and put it on extSD
5. POST-sGSI_1_v0.14.zip
6. POST-sGSI_2_v0.17.zip
7. POST-sGSI_3_v0.5.zip
Installation :
a Install TWRP 3.2.1-8 - TREBLE, reboot into twrp
b reboot to EDL
c Install AXON7_GPT_ADD_VENDOR_800MB.zip through Miflash (so extract files to same folder name and search it via Miflash)
d reboot into twrp again
e format system, data, cache, wipe vendor
f install Project_Treble_v1.1_Axon7-by-NFound.zip. This will 'resize' vendor to a +-500mb / afaik also compatible with LOS15 (treble) now, betas(B01,B12), all official roms A7, GSI's
g install P-PR1-sGSI-Aonly.zip, so tap install/img and choose the img file and flash
h install the 1, 2, and 3 Post-sGSI files in order, so mount /vendor and flash those 3 files.
i Reboot
After boot :
*use the gms , install it and create an account on google. It will speed up installation
* use Gcam to have a working camera : https://github.com/AospExtended/platform_vendor_aosp/blob/8.1.x/prebuilt/common/apk/Gcam.apk
* use this patch to have settings working in camera : https://forum.xda-developers.com/showpost.php?p=77296562&postcount=55 thnx @yarecco
* disable the navbar with : go to vendor / build.prop and add "qemu.hw.mainkeys=1"
or flash this A2017X Vendor NavBar Remover
* reverse softkeys : https://forum.xda-developers.com/axon-7/themes/mod-soft-key-reverse-using-synapticsdsx-t3827574
* for those who have call issues : https://forum.xda-developers.com/showpost.php?p=77285228&postcount=22 thnx @atakan33
* best, even on v1.1 to flash the framework overlay again : https://www.sendspace.com/file/x7jv8q. Makes DT2W work as it should !
*flash the pr1-lag-fix.zip to get a smoother experience thnx @atakan33 to mention it
As far as I know these things work :
*playstore....
*magisk 16.4, 16.7 working ok - safetynet pass ok confirmed on 16.7 - all should work, only a temp problem : https://twitter.com/topjohnwu/status/1029239685338419200?s=09
*full root r/w
*modules like youtube, jojoc....
*adaway
*call app but with ECHO so other persons hear themselves... for some members, even without Volte, the echo is note there and call volume can be adjusted
*no overheating with the v1.1
*better battery performance since v1.1
*dt2w works if you flash the framework overlay again when you're already booted. I uploaded it here since it got lost : https://www.sendspace.com/file/x7jv8q
* fast charge works, no heating at all
* spilt screen : just long press the icon in recents thnx @SantiHurtado
Not working :
*auto-brightness...or not in a way we're used to.... - there is no quick settings toggle, so if you want to untick auto, go to settings/display...
*dolby , but try this : https://forum.xda-developers.com/showpost.php?p=77289658&postcount=31 thnx @yarecco NOT WORKING - tested it myself and even bootloop when removing them. So if you want to try BACKUP FIRST !
*usb bug : greyed out so no control - in dev options you can choose an option but the usb setting still will be greyed out
......
Hope you can join in to give your opinion and add some more feedback to the pros and cons.
Join telegram Axon7 (s)GSI trebleSHOOT
Thanks man.
Based on AospExtended thread, I have done step 1 and 2. At present, I am on the latest AospExtended treble. I was wondering if someone can tell me if I need to do step 3 to 7. Do I need these ONLY if I want to try other GSI Roms? Or, do I need to do all of them regardless sooner or later?
Thanks.
EDIT: After more reading on the other thread, I think I understand more about this. Step 4 to 7 are to install the GSI rom. I guess my question now is if for now I want to keep using the latest AospExtended treble (Oreo), do I need to do step 3? Thanks
The GCAM link does not work. Saying file too large to display.
have installed Magisk 16.7 and safety pass is true
Gesendet von meinem ZTE A2017G mit Tapatalk
What is meant by sGSI or semi GSI?
ttkian said:
Based on AospExtended thread, I have done step 1 and 2. At present, I am on the latest AospExtended treble. I was wondering if someone can tell me if I need to do step 3 to 7. Do I need these ONLY if I want to try other GSI Roms? Or, do I need to do all of them regardless sooner or later?
Thanks.
EDIT: After more reading on the other thread, I think I understand more about this. Step 4 to 7 are to install the GSI rom. I guess my question now is if for now I want to keep using the latest AospExtended treble (Oreo), do I need to do step 3? Thanks
Click to expand...
Click to collapse
For this semiGSI you will need all steps a to i. For GSI's you can skip step h afaik.
Raffikie said:
The GCAM link does not work. Saying file too large to display.
Click to expand...
Click to collapse
Is working fine. Go to the page and just download
Rennert said:
have installed Magisk 16.7 and safety pass is true
Gesendet von meinem ZTE A2017G mit Tapatalk
Click to expand...
Click to collapse
Are you on v1.0 or v1.1 ? Because as for me on v1.0 I had a pass but on v1.1 it was a no go. Special setting used ?
EDIT : safetynet works, only cant be checked for the moment : https://twitter.com/topjohnwu/status/1029239685338419200?s=09
StickMonster said:
What is meant by sGSI or semi GSI?
Click to expand...
Click to collapse
That's the same. But Oki explained it imo very well here : https://forum.xda-developers.com/showpost.php?p=77328471&postcount=4793
A2017X_vendor_navbar_remover
For those who don't want to mess with their build.prop, just flash this and it will remove the navbar (if there is).
It'll work on all vendor build.props in future.
Backup of original build.prop will be created in /vendor so you can always revert if needed.
1. Since DT2W wasn't working, as in my experience and many others, on V1.1, I reflashed the Framework Overlay again and DT2W is working now.
2. Also, seems with Volte working properly, @kountry83, could manage to get the incall echo disappear and make decent calls. Even call volume is adjustable.
We're testing on TG (feel free to join too) further on.
3. The Dolby DDP and Audiomodification Lib seems not to work properly. Even bootloop when removing it...Did someone succeed in Dolby ?
4. flash the pr1-lag-fix.zip to get a smoother experience thnx @atakan33 to mention it
Dolby doesn't work, FC when start app. I don't have remove it, but can test it.
must i change the bootstack? because yesterday i tried to install PR1 but it cannot boot because i use universal bootstack that used on LOS 16 treble, i use Bootstack 12 and it boot, what is the best bootstack for this? thank you
shuemantri said:
must i change the bootstack? because yesterday i tried to install PR1 but it cannot boot because i use universal bootstack that used on LOS 16 treble, i use Bootstack 12 and it boot, what is the best bootstack for this? thank you
Click to expand...
Click to collapse
You're good to go on the B12 bootstack from NFound. Rest is in description of OP to boot any (s)GSI in future :good:
Did u miss me? jaja ok guys i still here, and now i bring to you an oren based rom for your beloved j5 prime M variant
Features:
odexed for fast boot
added samsung features
super kernel 2.0 for amazing performance and battery life
added some pie apps
others stuff
Installation:
put the zip file in your sd card
wipe data and then all partitions
open twrp and search for the rom and flash it
wait a few minutes enjoy
you need TWRP 3.2 to install this rom
Download: Cookie Rom
SM-G570M:
Download Cookie Rom S:
fixed some errors and added some features
make full wipe before install this update
Cookie RomS
Update Cookie Rom F Changelog:
Added Dolby Atmos ported from j6+
fixed multiwindow
updated gpu drivers
updated pie apps
updated some system apps
fixed weather location
stock updated gallery
some minor changes
added autotheme
others fixes
Download: Cookie Rom F
SM-G530F
added support for F variant ( cookie rom S )
Cookie Rom S F variant
SM-G530Y
updated with the new super kernel 2.0
Download:
Cookie Rom Y variant
Cookie Rom Alpha:
Changelog:
updated with stable pie apps
fixed and cleaned the code for better stability
performance improved without sacrifice battery life
kernel has been optimized with lz4 ram compression
some other stuff than i dont remenber
Only for M variant until now, other variants will be added later
Download:
Cookie rom Alpha
Oficial Telegram group for support and more:Telegram Group
Give us a like in our official fb comunity
Tutibreaker Designs in FB
ROM OS Version: 8.0.x Oreo
ROM Kernel: Linux 3.xx
ROM Firmware Required: Stock Oreo Android 8.0
Status: STABLE
Created 11-11-2018
Last Updated 27-01-2019
Special thanks to:
@corsicanu for ported pie apps
@adrodef for defex patch
@topjohwu for magisk app
@NiGhT6488 for the port to Y variant
@eNVy for his great pie theme
@Attie2 for add F variant support
Hit Thanks if you like my work :good:
include root and magisk? thanks
Thanks, TutiBreaker
I installed this Cookie ROM over the Cocktail Rom and it is perfect !
Quick question, flash via twrp = userdata preserve?
Its for g570y? And rooted already? Thinks for reply
Sadlyharry said:
Quick question, flash via twrp = userdata preserve?
Click to expand...
Click to collapse
I installed over the old Cocktail Rom and everything is Saved and working perfectly.
Perfect
Telegram group is a joke... useless. Spanish only and full of condescending and 2 word explanations. So, thanks but no thanks!
mach07 said:
Telegram group is a joke... useless. Spanish only and full of condescending and 2 word explanations. So, thanks but no thanks!
Click to expand...
Click to collapse
you should thank him for being the only active developer that produces great ROMs for the G570m
Should I? Even if I was not able to use it for lack of maturity from his group's "admins"? Bando de nóia...
I remember a time when I created such projects for iPhone. The thing is, if you gonna do it, do it right! Not the OP's fault actually, but the peoples he choose as supporters.
No, I thank AnonMx for his BeltaOS (that works flawlessly) and for his supporters, that provide support and answers for the questions at hand.
mach07 said:
Should I? Even if I was not able to use it for lack of maturity from his group's "admins"? Bando de nóia...
I remember a time when I created such projects for iPhone. The thing is, if you gonna do it, do it right! Not the OP's fault actually, but the peoples he choose as supporters.
No, I thank AnonMx for his BeltaOS (that works flawlessly) and for his supporters, that provide support and answers for the questions at hand.
Click to expand...
Click to collapse
dont cry bb
I guess the G570F variant will never get this rom ;-;
Thanks for added Y variant
This was a lovely rom for Y variant. The only problem I encountered was the vpn apps are not compatible on this rom.
Sent from my SM-G570Y using Tapatalk
@tutibreaker, I downloaded the Cookie ROM S but I open the zip and I didn't find the file boot.img
andreluizbarbieri said:
@tutibreaker, I downloaded the Cookie ROM S but I open the zip and I didn't find the file boot.img
Click to expand...
Click to collapse
so?
tutibreaker said:
so?
Click to expand...
Click to collapse
Cookie ROM without S had boot.img and the Cocktail ROM had also boot.img but the New Cookie ROM S have NO this file .... is it correct ? Can I install it over the old cookie Rom without Wipe Data (I installed the cookie over the cocktail without wipe data) ?
Edited : everything working ! I updated over the old cookie without wipe data
Porting To SM-G570F
May I ask tutibreaker if there are any intentions of the development team to port Cookie Rom to SM-G570F? I installed Cookie-Rom (M variant) over my F variant and I got a bunch of bootloops.
Root access
ROM working great, but root access option not found in developer options. Can I enable adb root somewhere else?
fetofatal said:
ROM working great, but root access option not found in developer options. Can I enable adb root somewhere else?
Click to expand...
Click to collapse
Use the Magisk