Hello all
I have unlock the bootloader of my Moto Z, rooted it and install twrp.
since that, it's nomore possible to boot with the original Nougat rom.
I can flash other roms with twrp but the phone is no more recognized with i plug it to my computer (MW10)
I have tried many roms and choose the MTP transfert but it don't works anymore.
I think somethin get wrong with the bootloader.
If somebody could help me
Do not forget, if you did "turn on write on system" (or something like that), you need to disable dm-verity!
After this you have to wipe data.
To disable dm-verity it is enough to flash a file with TWRP or flash a custom kernel.
(Everyone here tells that you have to flash a custom kernel in order to disable dm-verity, but this is not true.)
Flash the file attached to this post.
I have try this but it does not help me.
I think something get wrong with the bootloader because everytime i boot it asks me for the pin i gave before unloking it.
i have tried some roms and kernels but already the samr problem
frorgaba said:
I think something get wrong with the bootloader because everytime i boot it asks me for the pin i gave before unloking it.
i have tried some roms and kernels but already the samr problem
Click to expand...
Click to collapse
Bootloader is not your problem I think. Can you boot into bootloader from twrp?
Did you wipe data?
Cancel the "enter password" request and then wipe data.
Then data is unencrypted but you can easily enable it with a custom rom.
lollyjay said:
Bootloader is not your problem I think. Can you boot into bootloader from twrp?
Click to expand...
Click to collapse
yes i can boot with twrp
lollyjay said:
Bootloader is not your problem I think. Can you boot into bootloader from twrp?
Click to expand...
Click to collapse
Loader009 said:
Did you wipe data?
Cancel the "enter password" request and then wipe data.
Then data is unencrypted but you can easily enable it with a custom rom.
Click to expand...
Click to collapse
could you please explain how shall i do this
Boot into TWRP.
It will ask for a password (if phone is really encrypted), tap on cancel.
Go to wipe and follow what it shows. After this you can restart your phone.
Alternatively you can go to wipe, Advanced, select data and cache and wipe those two.
OK; I think I have solved my problem.
I have flashed an image of nougat with fastboot then i have flashed a new logo-bin and now i have th original Moto rom. I also get an official update from Moto.
fot the connectio with my PC I could also solved the problem. The MotoZ was recognized with fastboot but not when it was running with Android.
I have simply buy a new USB cable and now it works.
Thank you to all to have helped a biggener;
First of all I must apologize for my low level of English.
I will try to explain something strange that happens to my Pocophone since the arrival of the OTA with Android 10 and Miui11
Since I bought the Poco I have always used TWRP as recovery.
I currently use the 3.3.0.0 official TWRP version downloaded from its official app and I have no problem until the past weekend-
However, I have tried installing OrangeFox Recovery Project (OFRP), PitchBlack Recovery Project (PBRP) and an unofficial TWRP mod whose name is twrp-3.3.1-2-beryllium-adil2.img
And now I tell you I miss it.
If I boot into recovery using TWRP 3.3.0.0 it does not ask me for password, but if I flash OFRP, PBRP or mod 3.3.1.2 adil 2, it always asks me for a password when booting and tells me that the partition /data is encrypted. I do not know the password and I have never encrypted the Poco. Also the 3 revoveries show that is not installed any Tom, but when a reboot the system works perfectly.
Some colleagues have indicated to me that the data partition had been encrypted so I followed the next process to try to install a clean rom.
1. Boot in bootloader with Power + Vol-
2. Via fastboot flash OFRP
3. Boot in recovery (OFRP)
4. Format data and factory reset
5. Reboot recovery OFRP
6. Wipe: cache, Dalvik/Cache, Data and System partitions
7. Install rom XiaomiEU V11.0.4.0.QEJMIXM.zip
8. Flash DFE + Magisk
9. Reboot system
10. Complete ROM configuration
When I start again in recovery, it asks me for a password, informs me that data is encrypted and I cannot mount it, and I can't install anything.
However, if I flash TWRP 3.3.0.0 via fastboot, it no longer asks me for a password and I can mount the data partition and work normally.
If I flash again OFPR, PBRP or twrp-3.3.1-2-beryllium-adil2.img, ask me for a password again and it tells me that / data is encrypted
I tried to delete from /data/system the files locksettings.db, locksettings.db-shm and locksettings.db-wal but it continues asking me for a password if the recovery is always different of TWRP 3.3.0.0
otraver said:
First of all I must apologize for my low level of English.
I will try to explain something strange that happens to my Pocophone since the arrival of the OTA with Android 10 and Miui11
Since I bought the Poco I have always used TWRP as recovery.
I currently use the 3.3.0.0 official TWRP version downloaded from its official app and I have no problem until the past weekend-
However, I have tried installing OrangeFox Recovery Project (OFRP), PitchBlack Recovery Project (PBRP) and an unofficial TWRP mod whose name is twrp-3.3.1-2-beryllium-adil2.img
And now I tell you I miss it.
Click to expand...
Click to collapse
First off, your post belongs in the Q & A section. Please ask a moderator to move it as it has nothing to do with ROMs or development. Secondly, if official TWRP works, use it. Stop switching between recoveries and getting yourself all flustered.
PS: your English is fine. Don't sweat it.
Sent from my Galaxy Tab S5e using XDA Labs
Thank's for your answer.
guhvanoh said:
First off, your post belongs in the Q & A section. Please ask a moderator to move it as it has nothing to do with ROMs or development.
Click to expand...
Click to collapse
I don't know how conctact with the moderator. I'm a veteran user of the XDA-forums but I don't usually write frequently because my difficulty with the English language.
Secondly, if official TWRP works, use it. Stop switching between recoveries and getting yourself all flustered.
PS: your English is fine. Don't sweat it.
Click to expand...
Click to collapse
You're right. Here, in my country, we usually use this saying "if something works, don't touch it"
I wanted to try other recoveries because the official TWRP does not support USB-OTG access well.
About one year ago, I tried using a 256GB flashdrive with a m.2 ssd to perform a faster backup of the rom, but TWRP don't recognize the drive.
I read in these forums that TWRP had a problem managing USB-OTG and installed PBRP and it worked fine until last week I received the Miui11/Android10 OTA. After flashing it, PBRP started asking me for the password and displaying the message "I don't detect any rom installed". Despite having a recent backup (I always do it before flashing) I was a little scared.
I decided to reinstall TWRP by fastboot and I was surprised that the rom had been updated and everything worked ok.
As some colleagues tell me that I have the encrypted / data partition, I tried to make a format of the / data partition and new installation, with the result I commented above.
However, when I received the previous OTA, which was Android9 and Miui11, there was no problem.
I just wanted to share this strange situation.
I appreciate your message.
otraver said:
Thank's for your answer.
I don't know how conctact with the moderator. I'm a veteran user of the XDA-forums but I don't usually write frequently because my difficulty with the English language.
I appreciate your message.
Click to expand...
Click to collapse
Not a problem. If you view this in a web browser there is a button at the bottom left or right to report a post. Use that and ask for this thread to be moved.
PS: your English is still great.
Sent from my Galaxy Tab S5e using XDA Labs
otraver said:
First of all I must apologize for my low level of English.
I will try to explain something strange that happens to my Pocophone since the arrival of the OTA with Android 10 and Miui11
Since I bought the Poco I have always used TWRP as recovery.
I currently use the 3.3.0.0 official TWRP version downloaded from its official app and I have no problem until the past weekend-
However, I have tried installing OrangeFox Recovery Project (OFRP), PitchBlack Recovery Project (PBRP) and an unofficial TWRP mod whose name is twrp-3.3.1-2-beryllium-adil2.img
And now I tell you I miss it.
If I boot into recovery using TWRP 3.3.0.0 it does not ask me for password, but if I flash OFRP, PBRP or mod 3.3.1.2 adil 2, it always asks me for a password when booting and tells me that the partition /data is encrypted. I do not know the password and I have never encrypted the Poco. Also the 3 revoveries show that is not installed any Tom, but when a reboot the system works perfectly.
Some colleagues have indicated to me that the data partition had been encrypted so I followed the next process to try to install a clean rom.
1. Boot in bootloader with Power + Vol-
2. Via fastboot flash OFRP
3. Boot in recovery (OFRP)
4. Format data and factory reset
5. Reboot recovery OFRP
6. Wipe: cache, Dalvik/Cache, Data and System partitions
7. Install rom XiaomiEU V11.0.4.0.QEJMIXM.zip
8. Flash DFE + Magisk
9. Reboot system
10. Complete ROM configuration
When I start again in recovery, it asks me for a password, informs me that data is encrypted and I cannot mount it, and I can't install anything.
However, if I flash TWRP 3.3.0.0 via fastboot, it no longer asks me for a password and I can mount the data partition and work normally.
If I flash again OFPR, PBRP or twrp-3.3.1-2-beryllium-adil2.img, ask me for a password again and it tells me that / data is encrypted
I tried to delete from /data/system the files locksettings.db, locksettings.db-shm and locksettings.db-wal but it continues asking me for a password if the recovery is always different of TWRP 3.3.0.0
Click to expand...
Click to collapse
Hi bro I also facing same issue my problem is I m using orange fox recovery 10.0.1 version and when I flash miuiQ stable global with dfe it ask me to enter password when I boot to recovery don't know what happened. By the way is twrp official work perfectly????
---------- Post added at 04:07 PM ---------- Previous post was at 04:01 PM ----------
otraver said:
Thank's for your answer.
I don't know how conctact with the moderator. I'm a veteran user of the XDA-forums but I don't usually write frequently because my difficulty with the English language.
You're right. Here, in my country, we usually use this saying "if something works, don't touch it"
I wanted to try other recoveries because the official TWRP does not support USB-OTG access well.
About one year ago, I tried using a 256GB flashdrive with a m.2 ssd to perform a faster backup of the rom, but TWRP don't recognize the drive.
I read in these forums that TWRP had a problem managing USB-OTG and installed PBRP and it worked fine until last week I received the Miui11/Android10 OTA. After flashing it, PBRP started asking me for the password and displaying the message "I don't detect any rom installed". Despite having a recent backup (I always do it before flashing) I was a little scared.
I decided to reinstall TWRP by fastboot and I was surprised that the rom had been updated and everything worked ok.
As some colleagues tell me that I have the encrypted / data partition, I tried to make a format of the / data partition and new installation, with the result I commented above.
However, when I received the previous OTA, which was Android9 and Miui11, there was no problem.
I just wanted to share this strange situation.
I appreciate your message.
Click to expand...
Click to collapse
So bro twrp official never give encryption error if I flash miuiQ using it right ?
Hey there!
I have the same Situation here and I figured at least some points out:
- the Upgrade to Android 10 encrypted the data Partition. You can see that in in your phone settings under security and password. For some security reasons of Android Q I guess.
But what password and how to change is a mystery. There are tons of articles out there which are related to "encrypt with lock screen password" but thats something different. We have this Option too in developer settings but it is not Set. So the way of our New encrypted device is still a Secret.
- Official twrp is the only one to decrypt the data correct. If you go to the "save logs" section in twrp and save it you can see the log and it says that it decrypts with Standard password. But I wasnt able to find out that this is. And as I stated before we dont use the lockscreen password to decrypt, I tried to change and disable it but guess what... I didn't change anything.
I hope we can figure out as a community what's exactly going on here.
THE PASSWORD IS:
"default_password"
guhvanoh said:
Not a problem. If you view this in a web browser there is a button at the bottom left or right to report a post. Use that and ask for this thread to be moved.
Click to expand...
Click to collapse
Reported, thanks
sachin5555 said:
Hi bro I also facing same issue my problem is I m using orange fox recovery 10.0.1 version and when I flash miuiQ stable global with dfe it ask me to enter password when I boot to recovery don't know what happened. By the way is twrp official work perfectly????
Click to expand...
Click to collapse
I'm ussing the 3.3.0.0 and works perfectly...
So bro twrp official never give encryption error if I flash miuiQ using it right ?
Click to expand...
Click to collapse
In my case I have not had any problems.
I am currently using the global stable 11.0.4.0 QEJMIXM + TWRP 3.3.0.0 + Magisk 20.3
Fritzko said:
Hey there!
I have the same Situation here and I figured at least some points out:
- the Upgrade to Android 10 encrypted the data Partition. You can see that in in your phone settings under security and password. For some security reasons of Android Q I guess.
But what password and how to change is a mystery. There are tons of articles out there which are related to "encrypt with lock screen password" but thats something different. We have this Option too in developer settings but it is not Set. So the way of our New encrypted device is still a Secret.
Click to expand...
Click to collapse
I have checked what you say about ""encrypt with lock screen password" in developer settings and in my case it is disabled.
- Official twrp is the only one to decrypt the data correct. If you go to the "save logs" section in twrp and save it you can see the log and it says that it decrypts with Standard password. But I wasnt able to find out that this is. And as I stated before we dont use the lockscreen password to decrypt, I tried to change and disable it but guess what... I didn't change anything.
I hope we can figure out as a community what's exactly going on here.
Click to expand...
Click to collapse
Where can I find the logs you comment to check?
fraggy2 said:
THE PASSWORD IS:
"default_password"
Click to expand...
Click to collapse
Seriously?
I will not be able to try it until tomorrow. The motherboard of my PC has said that it doesn't work anymore and I am waiting for the arrival of a new one.
Where can I find the logs you comment to check?
Click to expand...
Click to collapse
Go to Twrp > advanced > copy logs. They are saved on your sd card.
fraggy2 said:
THE PASSWORD IS:
"default_password"
Click to expand...
Click to collapse
I tried wit "default_password" (without quotes) and don't work
Fritzko said:
Hey there!
- Official twrp is the only one to decrypt the data correct. If you go to the "save logs" section in twrp and save it you can see the log and it says that it decrypts with Standard password. But I wasnt able to find out that this is. And as I stated before we dont use the lockscreen password to decrypt, I tried to change and disable it but guess what... I didn't change anything.
Click to expand...
Click to collapse
I checked the TWRP logs and have you reason
Code:
I:Unmounting main partitions...
Successfully decrypted with default password.
I:Decrypt adopted storage starting
I:PageManager::LoadFileToBuffer loading filename: '/data/system/storage.xml' directly
I:successfully loaded storage.xml
Updating partition details...
I am using SHRP recovery for poco for 2 months now and I haven't faced any encryption problem (recovery asking for password). I would recommend you to try it buddy.
Champ16 said:
I am using SHRP recovery for poco for 2 months now and I haven't faced any encryption problem (recovery asking for password). I would recommend you to try it buddy.
Click to expand...
Click to collapse
If i flash it over twrp will it ask me to enter password?
sachin5555 said:
If i flash it over twrp will it ask me to enter password?
Click to expand...
Click to collapse
No
Champ16 said:
No
Click to expand...
Click to collapse
Done ! Thank u
Champ16 said:
I am using SHRP recovery for poco for 2 months now and I haven't faced any encryption problem (recovery asking for password). I would recommend you to try it buddy.
Click to expand...
Click to collapse
I don't think it works, but sure I will try it.
I have already tried everything I have been reading through many forums and I always get the same result.: the ****ing password
I have tried to deactivate the PIN, screen pattern, passwords, I have even logged off the Mi account and then I have tried to flash OFRP, PBRP and a TWRP mod and always, always ask me for password
I've tried booting on TWRP
1. Factory reset
2. Format data (not only wipe) (I answer "yes")
3. Reboot recovery
4. wipe cache, Dalvik / cache, Data and System
5 Install rom (miui_POCOF1Global_V11.0.4.0.QEJMIXM_74f88e6c8f_10.0.zip)
5. Flash twrp
6. Flash orange fox + DFE + magisk
7. Start rom and configure.
And without entering a PIN or blocking pattern, only gmail and Mi account and when returning to reboot in recovery it asks me again for a password.
SOLUTION:
I removed lockscreen password and flashed official TWRP.
Now it's decrypted successfully
The same kind of thing happened to me. I wish that I had seen this thread before. Lost all my data. ???
You can check it here
https://forum.xda-developers.com/poco-f1/help/miui-11-eu-android-10-encrypted-data-t4049421
Its seems like EU community released two version of twrp. So people how are facing white screen problem probably have the 1st version (recovery-TWRP-3.4.0B). Go to google and search "recovery-TWRP-3.4.1B-0322-REDMI_K30-CN-wzsx150" . Download and flash it. Hope it will fix it and can go normally to recovery using power& volume + button.
NB. Unfortunately i cant give the recovery link due to forum rules.
Its working fine ,guys just follow the steps.
Poco X2 official twrp When will it come?
luffy1212 said:
Its seems like EU community released two version of twrp. So people how are facing white screen problem probably have the 1st version (recovery-TWRP-3.4.0B). Go to google and search "recovery-TWRP-3.4.1B-0322-REDMI_K30-CN-wzsx150" . Download and flash it. Hope it will fix it and can go normally to recovery using power& volume + button.
NB. Unfortunately i cant give the recovery link due to forum rules.
Click to expand...
Click to collapse
Wow , thank you soo much bro
Hi, does this special edition TWRP support setting a password or trigger the same password/pattern set in MIUI, inorder to enter TWRP and flash something or access the file manager? Or in another word, does it support the encryption (is it FBE?) set in MIUI?
I installed the TWRP recovery and flashed a custom ROM using it (HAVOC OS). Now, I'm trying to get into the custom recovery but whenever I do that, it gives me a prompt for a password and says that the data is encrypted. How do I fix this? I can't find any solution to this.
LiLbomberxo said:
I installed the TWRP recovery and flashed a custom ROM using it (HAVOC OS). Now, I'm trying to get into the custom recovery but whenever I do that, it gives me a prompt for a password and says that the data is encrypted. How do I fix this? I can't find any solution to this.
Click to expand...
Click to collapse
boot to your stock system...or usuall
y the password for user[0] is your pin/password that you used to unlock your screen with
before flashing or unlocking your bootloader..the option is to just remove it before you flash..if not just enter that password..or you'll have format the whole thing
Hello guys ,
I want to know why he team of twrp recovery did not make any protection to the the recovery page after flashing the refovery ?!
Why is there no password to prevene anyone finding the mobile to get into the recovery page easily and flash new firmware ?
The bootloader page only is opened from twrp recovery so no one can flash without getting into the recovery . and if the recovery has password ,the phone will completely be protected.
You understand me or not because english is not my main language
asem54 said:
The bootloader page only is opened from twrp recovery so no one can flash without getting into the recovery .
Click to expand...
Click to collapse
Not true. anyone with physical access can enter download mode and flash everything. You better go for encryption!
aIecxs said:
Not true. anyone with physical access can enter download mode and flash everything. You better go for encryption!
Click to expand...
Click to collapse
I tried to encrypt my mobile but it does not success , so i sent to samsung support team and they told me that this option is no longer available on android 11
So what can i do now ?
oh well, I forgot to mention TWRP does not support samsung encryption, so this is not an option for you (although I am confused you asked samsung support)
so either go for OrangeFox recovery (afaik support pw) or use Migrate and drop TWRP completely, then you can encrypt your device again
MaNY THaNKs My FriEND IT wOrKEd WeLL !