Hi,
Today i flashed Omni Rom and i was unable to get the goodix fingerprint to work.. so i tried to flash the psy firmware suggested in the thread.. still did not work.. so i thought of going back to NOS.. but the rom flashing was stuck at patch system image unconditionally..
Already tried flashing MIUI again and tried to flash this same error.. Using cofface TWRP 3.0.0.0
Any help to flash NOS again..
Download again ROM lokks like currupted
Related
I was on 4.4.4 and i flashed 5.1.1 rom. it didnt flash. but gave me no error. So when i flash a new rom with cwm or odin, (even with 4 file stock rom and repartition thing) i still cant flash another rom. İt flash kernels or gapps succesfully but when i restore my nandroid backup or flash a rom it shows succesfull but when i check system it has 26 mb. What should i do
Maybe flashing stock rom and after installing custom recovery fix issue but maybe there is an error at backup
im having very weird boot loops, which i think is because of full wipes, i couldnt install carhd rom, with full wipe and without..but with crisscross it only works without full wipe. if i fullwiped and installed crisscross, i get stuck in a boot loop...
does anyone have any idea? these are my first roms btw.
Have you updated your bootloader and modem to MM?
Also have you installed TWRP v3.x.x.x (arter has custom recovery for F and I variants).
I'd suggest you do the MM update through odin
Valkiry said:
Have you updated your bootloader and modem to MM?
Also have you installed TWRP v3.x.x.x (arter has custom recovery for F and I variants).
I'd suggest you do the MM update through odin
Click to expand...
Click to collapse
i flashed by being on stock MM, do i still need to flash the bootloaded and modem to MM? im already using the arter TWRP
1) cm-14.0-20160914-UNOFFICIAL-onyx.zip, 2) cm-14.0-20160917-UNOFFICIAL-onyx.zip
These are the 2 cm14 zips that I tried to flash multiple times (using twrp 3.0.2.0). The flash was successful everytime. But no matter how hard I try, it just won't boot. Just stays stuck on the OnePlus logo for eternity. I just recovered my phone from a soft-brick (no OS, no Recovery) and still continuously trying since days to use cm14.
Please, if anyone can then PLEASE HELP!
amritanshu.sikdar said:
1) cm-14.0-20160914-UNOFFICIAL-onyx.zip, 2) cm-14.0-20160917-UNOFFICIAL-onyx.zip
These are the 2 cm14 zips that I tried to flash multiple times (using twrp 3.0.2.0). The flash was successful everytime. But no matter how hard I try, it just won't boot. Just stays stuck on the OnePlus logo for eternity. I just recovered my phone from a soft-brick (no OS, no Recovery) and still continuously trying since days to use cm14.
Please, if anyone can then PLEASE HELP!
Click to expand...
Click to collapse
Check the bootloader compatibilty of these roms, if they r for the mm bootloader it ll not boot untill u upgrade ur bootloader, check the threads from wer u hv downloaded this...
amritanshu.sikdar said:
1) cm-14.0-20160914-UNOFFICIAL-onyx.zip, 2) cm-14.0-20160917-UNOFFICIAL-onyx.zip
These are the 2 cm14 zips that I tried to flash multiple times (using twrp 3.0.2.0). The flash was successful everytime. But no matter how hard I try, it just won't boot. Just stays stuck on the OnePlus logo for eternity. I just recovered my phone from a soft-brick (no OS, no Recovery) and still continuously trying since days to use cm14.
Please, if anyone can then PLEASE HELP!
Click to expand...
Click to collapse
Most Roms now require you too flash OOS 3.1.3 first. Like mentioned above bootloader issue.
Exodusche said:
Most Roms now require you too flash OOS 3.1.3 first. Like mentioned above bootloader issue.
Click to expand...
Click to collapse
I already flash the OOS 3, but still this problem continues.
File name: OnePlusXOxygen_14_OTA_015_all_201608181615_e03d2112e8ad4bff
Is there any other way how I can manually upgrade my bootloader? That would really help.
amritanshu.sikdar said:
I already flash the OOS 3, but still this problem continues.
File name: OnePlusXOxygen_14_OTA_015_all_201608181615_e03d2112e8ad4bff
Is there any other way how I can manually upgrade my bootloader? That would really help.
Click to expand...
Click to collapse
check out this thread http://forum.xda-developers.com/oneplus-x/general/guide-update-bootloader-firmware-to-t3478917
amritanshu.sikdar said:
I already flash the OOS 3, but still this problem continues.
File name: OnePlusXOxygen_14_OTA_015_all_201608181615_e03d2112e8ad4bff
Is there any other way how I can manually upgrade my bootloader? That would really help.
Click to expand...
Click to collapse
I use Oxygen_14_OTA_18_all but there's a couple files posted on the bootloader upgrade threads that allow you not too flash the whole firmware just the partions you need to upgrade.
i am having same issue i was on oxygenos 3.1.3 firmware when i started to flash nogut roms every nogut rom works except cm. i flashed official cynogenmod 14.1 thinking that problem must have been solved but it wont boot it just shows oneplus logo. i have waited for 30 minutes but nothing happened if something worked out for you please tell me.
Well I've looked around XDA for soultion and this is it.
CM 14 has some Kernel problems, so only what you have to do is just install new kernel as Arsenic or Black Reactor kernel
I was running the new bootloader on cm13 nightlies and couldn't get it to boot either.
Even after a full wipe and reflash with v7 gapps
Gave up in the end and went back to the last cm13 Nightly
flash arsenic kernel after flashing rom and gapps it will boot. Read the posts in ashwin's official cm 14.1 thread.
Flash Black Reactor (recommended) or Arsenic Kernel.
The zip files that you have for CM are the unofficial ones. So I guess they're from Sarthak Narang. Or at least one of them. Those ROMs require the older bootloader to function. So if you have the newer bootloader, it won't work.
Hi ! all ,
i just unlock bootloader offically. now i m confused between these two TWRP. i just want to flash cm based roms as well as revert back to miui roms without any problem. also want to backup my rom & flash through twrp if ever i stuck on boot logo. i mean i dont wanna use fastboot method to flash miui roms everytime . i jsut want to simply revert back to current rom or flash any rom through TWRP. so tell me which is best for me & give me instruction & file link also
Thanks in advance
COFFACE and Alka are really meant for MIUI but I think you can flash CM, never tried it though, I always use official TWRP. then again, I never backup ROMs. I use titanium backup.
zooreo said:
Hi ! all ,
i just unlock bootloader offically. now i m confused between these two TWRP. i just want to flash cm based roms as well as revert back to miui roms without any problem. also want to backup my rom & flash through twrp if ever i stuck on boot logo. i mean i dont wanna use fastboot method to flash miui roms everytime . i jsut want to simply revert back to current rom or flash any rom through TWRP. so tell me which is best for me & give me instruction & file link also
Thanks in advance
Click to expand...
Click to collapse
i use alka with resurrection remix rom. but i have to admit that i did backups but never tried to restore them because there are no guids how to do so on the redmi note 3 pro. because at some roms it seems you have to deselect system partition restore to get a working restore of a backup.
so ... flashing CM or resurrection remix is no problem with alka twrp ... restoring i never tried
I personally prefer Cofface patched by feds64 with which you don't have encryption related problems. I have upgraded and downgraded multiple times in MIUI (dev/stable/miui7/miui8/M/L) and other custom ROMs; and have even restored MIUI and other custom ROM's backup. No issue yet.
You can get it from HERE.
h0LLe said:
i use alka with resurrection remix rom. but i have to admit that i did backups but never tried to restore them because there are no guids how to do so on the redmi note 3 pro. because at some roms it seems you have to deselect system partition restore to get a working restore of a backup.
so ... flashing CM or resurrection remix is no problem with alka twrp ... restoring i never tried
Click to expand...
Click to collapse
Thanx brother
sasukay said:
I personally prefer Cofface patched by feds64 with which you don't have encryption related problems. I have upgraded and downgraded multiple times in MIUI (dev/stable/miui7/miui8/M/L) and other custom ROMs; and have even restored MIUI and other custom ROM's backup. No issue yet.
You can get it from HERE.
Click to expand...
Click to collapse
Thank you bro but i cant get it properly , i mean i m currently on official TWRP now what next? first to flash cofface recovery and then do mentioned ( link ) step?? or directly Go to this step without installing cofface first?? i m currently on miui 8 ( lollipop 5.1 ).
zooreo said:
Thank you bro but i cant get it properly , i mean i m currently on official TWRP now what next?
Click to expand...
Click to collapse
Bro just DOWNLOAD THIS ZIP, connect your phone with usb debugging on and run "Kenzo_MM_TWRP.bat" and follow the steps to flash twrp.
When I flash only N ROM + Gapps, everything's going normal. But when I flash custom kernel (radon, agni, assassinx), my phone always ended bootloop. Is there something wrong? I'm using Psy_Man's firmware & Official TWRP 3.0.2-2 anyway.
Anyone? Please?