There is a continuous black screen on my canvas hd always
i tried to power on but nothing happen
even i cant reach the canvas hd logo screen
when i connect it to my laptop nothing happen (micromax drivers already installed)
in device manager there is detection but unkowndevice
it connects to sp tool software after installing mobistel cynus t1 driver
but i can't flash my rom
there is one more problem
when i connect my micromax canvas hd to my laptop it can't show internal /external both storage so i can't move in or out any file
please friends help me to solve this problem .....
thanks in advance
soft bircked & YGDP not working a311
please help me.. i soft bricked my nitro a311 & try to flash stock rom with the help of YGDP.. but it is stucking at "Enetering download mode"..
please tell me how can i flash to stock rom in brief...:crying::crying:
@bhavincb check this thread for flashable stock rom for a311 via twrp recovery
http://forum.xda-developers.com/a310/orig-development/rom-twrp-flashable-micromax-canvas-t3287008
bhavincb said:
please help me.. i soft bricked my nitro a311 & try to flash stock rom with the help of YGDP.. but it is stucking at "Enetering download mode"..
please tell me how can i flash to stock rom in brief...:crying::crying:
Click to expand...
Click to collapse
Do you have custom recovery? If yes then follow Bhushan1985's post
if having stock recovery then download latest ygdp tool and while flashing (ENTERING DOWNLOAD MODE) connect your phone WITHOUT BATTERY.
Hope it will help!
---------- Post added at 08:59 AM ---------- Previous post was at 08:57 AM ----------
Check this link for step to step instruction for flashing stock rom with ygdp
when flashing micromax nitro a311 usig ygdp tool it stuck on 80%
when flashing micromax nitro a311 usig ygdp tool it stuck on 80% please help.
when i start and use usb cable connect and it stay entering mode and it sound begin connect and disconect plz help what will doooo??????
bhavincb said:
please help me.. i soft bricked my nitro a311 & try to flash stock rom with the help of YGDP.. but it is stucking at "Enetering download mode"..
please tell me how can i flash to stock rom in brief...:crying::crying:
Click to expand...
Click to collapse
don't know you still have this problem, may be it will help other user
If YGDP tool not working for you use sptool but where to find firmware for sptool...
its easy, Load your .CPB in YGDP tool. Once it loaded you will have new folder "DownFiles" in YGDP directory for example in my case
C:\YLXZGJ\YGDP\DownFiles
Here you will find your sptool firmware, grap it past somewhere
Flash with sptool
Enjoy....Hope it help
u need to install & upgrade the drivers
khan_frd2002 said:
don't know you still have this problem, may be it will help other user
If YGDP tool not working for you use sptool but where to find firmware for sptool...
its easy, Load your .CPB in YGDP tool. Once it loaded you will have new folder "DownFiles" in YGDP directory for example in my case
C:\YLXZGJ\YGDP\DownFiles
Here you will find your sptool firmware, grap it past somewhere
Flash with sptool
Enjoy....Hope it help
Click to expand...
Click to collapse
I was irritated by the same problem, u need to install (or upgrade the drivers when u connect your phone it will be shown under device manager-port (COM & LTP) only for few seconds ) vcom driver then only YGPD will detect your phone.
preetigupta590 said:
when i start and use usb cable connect and it stay entering mode and it sound begin connect and disconect plz help what will doooo??????
Click to expand...
Click to collapse
I was irritated by the same problem, u need to install (or upgrade the drivers when u connect your phone it will be shown under device manager-port (COM & LTP) only for few seconds ) vcom driver then only YGPD will detect your phone.
i also have same problem sir........
k2ajeet said:
when flashing micromax nitro a311 usig ygdp tool it stuck on 80% please help.
Click to expand...
Click to collapse
my download stop at 83% and cpb download failed..............................
please help me as possible as.
sp tool also not working it shows brom error 2035
how to update drivers
lokesh314 said:
I was irritated by the same problem, u need to install (or upgrade the drivers when u connect your phone it will be shown under device manager-port (COM & LTP) only for few seconds ) vcom driver then only YGPD will detect your phone.
Click to expand...
Click to collapse
i am facing the same problem, i dont know how to update driver, i tried to update from windows update, it says you got the the latest drivers, can you provide me the link/ files for micromaxa311 driver by which my mobile can get detected by sp flash tool (ygdp too)
Same issuew
bhavincb said:
please help me.. I soft bricked my nitro a311 & try to flash stock rom with the help of ygdp.. But it is stucking at "enetering download mode"..
Please tell me how can i flash to stock rom in brief...:crying::crying:
Click to expand...
Click to collapse
same issue kya karu bhai
Just FYI: I have a Coolpad F1 (which is the same hardware as the A310). I tried a bunch of ROM's incl. the 7.1.2 Lineage one, but non worked with Pokemon Go (it's my daughters "gaming phone"). So I tried the Micromax stock ROM - and Pokeman Go works. It's a terrible 4.4 ROM with a lot of trash programs built in, so really not worth considering - but Pokeman Go works..
My phone has TWRP 2.8.x installed, but I flashed it with fastboot (only boot & system), which I extracted from the stock cpb-file (4.4.031.P0.141015.8297W_I01.CPB). No need to use ygdp at all - besides using it to split the cpb-file into the flashable images. Wipe data, dalvik and cache in TWRP and then flash with fastboot the boot.img and system.img. I had some problem flashing the system.img, it worked with first formatting it and then flash with "fastboot flash -u system.img".
First install coolpad driver . because ygdp coolpad software.
Then use sp tool and flash
But sptool give error,that time you go to device manager and uninstall the driver,after uninstall coolpad driver automatically taken.and then ygdp detect your device and start flashing.
Don't use battery .
100% successful
preetigupta590 said:
when i start and use usb cable connect and it stay entering mode and it sound begin connect and disconect plz help what will doooo??????
Click to expand...
Click to collapse
Me to in the problem
MediaTek 6582- canvas A120 ( micromax canvas 2 colours ) unfortunately format in "SP Flash tool" all the data including mt6582 preloader also deleted from phone. Whole phone is formated including driver.
how can i install MediaTek driver to mobile? {mobile is not opening. no response even connect charging }
how can i restore whole
waiting for reply ..... please.
i just wanted to restore my micromax canvas aq5001 to its stock rom.But my phone is stuck in the boot loop.Can i proceed using SP tools without usb debugging turned on.
Hello Developer's I am Rakesh dhawan iam using MMX A310 and I have a problem on my device my problem is when I starred my mobile its not open i men it's not working only its shows only Powered by andriod that's one and :crying:
Wen I Go to Recovery mode its also not working that's also stock on Teamwin Recovery shows only but that's Not Going to Recovery option's Now what can I do and I have A Windows 10 32bits PC now any one can tell me how to set the problem can you tell me please:crying::crying::crying: