I'm new to rooting and all of this type of thing, i figured I would first start with my HTC Flyer. I successfully unlocked the bootloader, and installed SuperUser, upon installing greenify and i tried to install the Xposed Framework, and my device now is stuck in a boot loop.
When enter the bootloader and do a factory reset or try to enter factory it completely freezes, and when i try to connect it to my PC via fastboot the PC says that the USB device that is connected cannot be recognized and fastboot will not work. Did i completely fry this device? Also if you have time I couldnt figure out a proper way to flash a custom rom so if anyone has a guide for that I would appreciate a link to that as well.
Thank you so much!!
I have been looking at hundreds of forums to find no true solution to my problem.
I installed a custom boot and now my phone is stuck boot looping. There are actually some solutions to my problem but, this is what I have.
Usb debugging is disabled
Cannot axcess device through ADB
I do have axcess to fastboot
When trying to flash, get error phone returned fail
Cannot axcess recovery menu
Device not detected by odin
Is there a way to fix any of these so I can get rid of bootanimation.zip and fix my issue?
Please help!
Hi XDA Community,
I have been a silent reader and user of many custom roms but now I can't solve my problem alone, I have to admit. My current device is a redmi note 3 and I am using it for about a year now. Today the phone went into a bootloop itself and I can't bring it back.
It runs the CM 14.1 kenzo and got xposed and xprivacy installed.
The problem is caused by xposed (very sure) but unfortunately every solution I tried failed.
-My plan was to flash the xposed disabler.zip using TWRP 3.0.2-2 but that won't let me get to main menu. Its stuck at the twrp boot screen. (Any ideas why? Maybe weak battery)
-The next I tried was entering fastboot and flash it this way, but it seems like usb debugging is disabled. (Is there a chance to enabled USB debugging without beeing able to boot?)
-Next I tried was to enter edl mode and flash twrp again using miflash but that gave me the error "unable to communicate on port COM10"
So now I really don't know what to do to disable the xposed moduls and boot again.
I guess possible was would be to enable usb debugging or find out why twrp won't boot or flash that disabler zip in odin. But let me know what ideas you have.
Thanks for your help guys
ligger_sunnyboy said:
Hi XDA Community,
I have been a silent reader and user of many custom roms but now I can't solve my problem alone, I have to admit. My current device is a redmi note 3 and I am using it for about a year now. Today the phone went into a bootloop itself and I can't bring it back.
It runs the CM 14.1 kenzo and got xposed and xprivacy installed.
The problem is caused by xposed (very sure) but unfortunately every solution I tried failed.
-My plan was to flash the xposed disabler.zip using TWRP 3.0.2-2 but that won't let me get to main menu. Its stuck at the twrp boot screen. (Any ideas why? Maybe weak battery)
-The next I tried was entering fastboot and flash it this way, but it seems like usb debugging is disabled. (Is there a chance to enabled USB debugging without beeing able to boot?)
-Next I tried was to enter edl mode and flash twrp again using miflash but that gave me the error "unable to communicate on port COM10"
So now I really don't know what to do to disable the xposed moduls and boot again.
I guess possible was would be to enable usb debugging or find out why twrp won't boot or flash that disabler zip in odin. But let me know what ideas you have.
Thanks for your help guys
Click to expand...
Click to collapse
xposed is not supported on android 7 roms, please dont try that again.
i would suggest that if fastboot is accessible you should use miflash to starover with miui.
if you can access fastboot mode and your device is officially unlocked then try to boot into twrp using fastboot boot <name of the recovery>.img
or you can try flash with mitools (USB debugging is not needed for flashing ). you can use the deep flash cable to flash your device in edl mode
Follow this guide http://en.miui.com/thread-235865-1-1.html
Hello,
I have Samsung A5 2017, my cell has virus attack and every minute it restart automatically, all things are stocks so not able to reflash,reset device
is there any way usb debugging enabled from recovery/download mode ?
Not adb, but hold volume down while the phone is starting. A watermark will appear, "Safe Mode", the "virus", if not a root exploit, will not load and you could uninstall it. Also remove it from the device administrators & accessibility settings. If it doesn't work, hold volume up. If it doesn't work, press and hold the menu/recents key when the "SAMSUNG" logo and the brightness changes.
sunnymodh said:
Hello,
I have Samsung A5 2017, my cell has virus attack and every minute it restart automatically, all things are stocks so not able to reflash,reset device
is there any way usb debugging enabled from recovery/download mode ?
Click to expand...
Click to collapse
If you know your Google account details and you don't mind losing all your data reset your device.
It's unlikely it has compromised the system partition unless you were rooted.
If you were rooted then you may as well just wipe data with twrp.
Failing that reinstall the stock firmware.
nothing worked, i think virus at boot level, because can able to enter stock recovery, after factory reset result is same, tried with safe mode, but not work, not able to connect internet and reset device because it turn only 50 Seconds and rebooted, if i tried with odin than got error - FRP Lock, i also tried google device reset from web but it required internet connection on phone , so this option also not worked
sunnymodh said:
nothing worked, i think virus at boot level, because can able to enter stock recovery, after factory reset result is same, tried with safe mode, but not work, not able to connect internet and reset device because it turn only 50 Seconds and rebooted, if i tried with odin than got error - FRP Lock, i also tried google device reset from web but it required internet connection on phone , so this option also not worked
Click to expand...
Click to collapse
If you have installed the correct firmware with odin and factory reset and your device still has issues then your problem is not related to a virus. More likely a hardware issue.
ashyx said:
If you have installed the correct firmware with odin and factory reset and your device still has issues then your problem is not related to a virus. More likely a hardware issue.
Click to expand...
Click to collapse
May be, but when i tried to install Custom Recovery CWM, TWRP it gaves message - custom binary blocked by frp lock
If i tried same firmware - then stuck without any reason - log say - recovery.img cancelled
why i think this is virus because i enabled usb debug and after auto reboot again its shows disabled , even i change wallpaper and reboot its showing same old wallpaper, means anything i do after 50 seconds revert back as it is, one kind device is locked
sunnymodh said:
May be, but when i tried to install Custom Recovery CWM, TWRP it gaves message - custom binary blocked by frp lock
If i tried same firmware - then stuck without any reason - log say - recovery.img cancelled
why i think this is virus because i enabled usb debug and after auto reboot again its shows disabled , even i change wallpaper and reboot its showing same old wallpaper, means anything i do after 50 seconds revert back as it is, one kind device is locked
Click to expand...
Click to collapse
You can't install anything custom until OEM UNLOCK is enabled in settings.
Install the stock firmware with odin then factory reset in stock recovery.
You will need to enter your Google account details once the device has fully booted to disable FRP.
ashyx said:
You can't install anything custom until OEM UNLOCK is enabled in settings.
Install the stock firmware with odin then factory reset in stock recovery.
You will need to enter your Google account details once the device has fully booted to disable FRP.
Click to expand...
Click to collapse
Yes, i tried , but not successes, after complete reboot i get 50 Seconds only, in this time period i can only enable usb debug, but when i enabled OEM unlock option, its automatically turn off without any error, and device reboot, so neither able to uninstall anything nor accessing via adb because 50 seconds its too less
even i connect with pc and try to format phone memory , after reboot all deleted file again available, even renamed files back to with same name
sunnymodh said:
Yes, i tried , but not successes, after complete reboot i get 50 Seconds only, in this time period i can only enable usb debug, but when i enabled OEM unlock option, its automatically turn off without any error, and device reboot, so neither able to uninstall anything nor accessing via adb because 50 seconds its too less
even i connect with pc and try to format phone memory , after reboot all deleted file again available, even renamed files back to with same name
Click to expand...
Click to collapse
Forget about USB debugging it's not going to help you right now. I would try enabling OEM UNLOCK and then immediately power down the device BEFORE it reboots.
ashyx said:
Forget about USB debugging it's not going to help you right now. I would try enabling OEM UNLOCK and then immediately power down the device BEFORE it reboots.
Click to expand...
Click to collapse
i tried OEM , but automatically turn off without giving any message, i connect with Samsung Kies, it show " Your Device is Locked" i don't no why this message came
is there any chance to do from Download mode ? because odin not work, i flash with PIT file but nothing has to be worked, because Samsung Official Lock enabled so we cant flash anything but is there any alternative of Odin may be work
Hello androids, I have a big problem or a good challenge, depends on your optimism. I've been looking for and trying solutions for hours and hours, but I think I've come across a wall and I need your help:
Originally I wanted to root my s7 Edge / SM - G935F (OS Marshmallow 6.0.1) by following a tutorial using an autoroot ROM for this phone. I remember I had USB debugging and OEM unlock enabled. I also installed the USB / ADB drivers correctly.
I used Odin v3.11, since they recommended using it for this mobile and MM 6.0.1. According to Odin, the rom was installed successfully, but my phone entered a loop with the Samsung logo and "RECOVERY IS NOT SEANDROID ENFORCING". Something failed in the process and I decided to install a S7 Edge stock ROM in 8.0.0 from SAMMobile (this one) with Odin v3.13 using HOME_CSC so that I don't lose certain data
Unfortunately everything was going well until just at the end when "hidden.img" did not process correctly and resulted in FAIL. I've been since then stuck with this error:
"An Error has occurred while updating the device software. Use the Emergency Recovery in the Smart Switch PC Software."
It won't even turn off. From there I can only access the Download Mode and neither the Smart Switch or the ADB & Fastboot console won't detect the device. Odin does recognize the phone, but every time I try to install a rom, the log gets stuck in "SetupConnection ..".
I have tried a bunch of solutions such as removing the "hidden.img" from the package, reinstalling the drivers, changing the USB port, changing Odin's version, installing only the BL, etc., but nothing shows progress...
I'm sorry if during the process I managed to do some stupidity that I am not aware of. Other phones I have never had problems, but now I feel defeated and lost. I need a savior! :crying:
Any way to make Odin work, ADB detect my device or access a working bootload? Thanks in advance!