sorry for my bad English first, 如果恰好有人可以用中文回复那就更好了。:highfive:
i got a old device from my friend last week, a nook tablet 16g with a broken USB port (only charging no adb communicating. weird!).
then i flashed it from cm10 to cm14 through this topic : https://forum.xda-developers.com/no...-14-1-nook-tablet-acclaim-16gb-model-t3499226 (because all roms seems not to be downloaded now but this one)
and it was bricked.:crying: recovery shows a flashing text "no command". so i flashed the recovery, in recovery mode i cannot wipe to factory, it said "failed to locate device "/dev/block/mmcblk0p11", no matter cwm or twrp.
Code:
-- Factory reset started.
Formatting /data...
I:tw_format: Formatting "/dev/block/mmcblk0p11" as "ext4"
E:tw_format: failed to locate device "/dev/block/mmcblk0p11"
Formatting /cache...
I:tw_format: Formatting "/dev/block/mmcblk0p9" as "ext4"
I:mke2fs command: mke2fs -t ext4 -m 0 /dev/block/mmcblk0p9
mke2fs 1.41.11 (14-Mar-2010)
Filesystem label=
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
Stride=0 blocks, Stripe width=0 blocks
65536 inodes, 262144 blocks
0 blocks (0.00%) reserved for the super user
First data block=0
Maximum filesystem blocks=268435456
8 block groups
32768 blocks per group, 32768 fragments per group
8192 inodes per group
Superblock backups stored on blocks:
32768, 98304, 163840, 229376
i will up load the recovery.log file later.
now i connot flash any roms include stock, it always shows error.
here is the situation:
bad news is i have an bricked device with out USB communicating. good news is i made a SDcard booting cm10 with terminal in it that can be used and a SDcard booting TWRP recovery with terminal, but i dont know what to do now.
top priority now is make the data(mmcblk0p11) available. then i try to flash any other roms like cm14.
do i make myself clear on this? someone help me plz!:crying:
Have you tried this unbrick procedure outlined at http://bishoptec.com/2012/06/how-to-un-brick-a-nook-tablet-8gb-or-16gb/?
Related
I think after running wrong exit_recovery.zip, I managed to trash partition table/GPT - or some other combination of stupidity - hoping someone can help..
CWM Recovery Log
Starting recovery on Mon Jun 25 21:11:17 2012
can't open /dev/tty0: No such file or directory
framebuffer: fd 3 (1280 x 800)
ClockworkMod Recovery v5.8.2.0
recovery filesystem table
=========================
0 /tmp ramdisk (null) (null) 0
1 /system ext4 /dev/block/mmcblk0p1 (null) 0
2 /cache ext4 /dev/block/mmcblk0p2 (null) 0
3 /misc emmc /dev/block/mmcblk0p3 (null) 0
4 /staging ext3 /dev/block/mmcblk0p4 (null) 0
5 /data ext4 /dev/block/mmcblk0p8 (null) 0
6 /boot emmc /dev/block/mmcblk0p10 (null) 0
7 /recovery emmc /dev/block/mmcblk0p9 (null) 0
W:Unable to get recovery.fstab info for /datadata during fstab generation!
W:Unable to get recovery.fstab info for /emmc during fstab generation!
W:Unable to get recovery.fstab info for /sdcard during fstab generation!
W:Unable to get recovery.fstab info for /sd-ext during fstab generation!
I:Completed outputting fstab.
Irocessing arguments.
...
[recovery session] Fdisk
/tmp # fdisk -l /dev/block/mmcblk0
Disk /dev/block/mmcblk0: 63.5 GB, 63577260032 bytes
4 heads, 16 sectors/track, 1940224 cylinders
Units = cylinders of 64 * 512 = 32768 bytes
Disk /dev/block/mmcblk0 doesn't contain a valid partition table
[recovery session] Parted
/tmp # ./parted /dev/block/mmcblk0
GNU Parted 1.8.8.1.179-aef3
Using /dev/block/mmcblk0
Welcome to GNU Parted! Type 'help' to view a list of commands.
(parted) p
p
Error: /dev/block/mmcblk0: unrecognised disk label
Hypothesis
By doing exit recovery opt 1a http://forum.xda-developers.com/showthread.php?t=1514088 I was able to bring up the virtuousprime ROM boot, but virtuous failed (reboot) after trying to format /data.
I dd'd the first 8096 bytes of mmcblk0 and they are all zeros?
From CWM, I am able to mount partitions mmcblk0p1, mmcblk0p3, mmcblk0p5.
So from all that, I am thinking I need to flash MBR, replace GPT on LBA 1? If this is correct, does anyone have a stock GPT for the tf201?
I can then format /data (mmcblk0p8) and I think my ROMs will then work.
kind regs,
Based on the information here: https:// en.wikipedia.org/wiki/GUID_Partition_Table#Partition_table_header_.28LBA_1.29, replacing LBA 1 will only fix the GPT header. Since you said that the first 8096 bytes were all zeros, it would seem that those would fall into LBA 2, 3, etc., corrupting the partition table.
But since you said that CWM can mount your partitions, you might be able to use GPT fdisk's recovery features to fix the problem. I don't know if anyone has compiled it for Android though Please note that the regular fdisk cannot handle GPT, only MBR.
When you said "flash MBR", what exactly do you mean? GPT and MBR are two different partition structures and if you replace either one with the other, the partition table will be lost and you won't be able to mount any partition.
Was thinking about building LBA0 and LBA 1 separately, was going from that Wikipedia article, "...Legacy MBR information is contained in LBA 0, the GPT header is in LBA 1.." and I thought - perhaps naively - that an fdisk command with /mbr option would sort out LBA0, then I worry about GPT in LBA1, but maybe I am confusing fdisk /mbr option with another command (old DOS)?
I have all the partition offsets and disk size from backup (/sys/devices/platform/sdhci-tegra.3/mmc_host/mmc0/mmc0:0001/block/mmcblk0/..) and know what the partition table should look like; there was no "Partition 9", I made this up because there was 1024 unaccounted bytes after mmcblk0p8 (/data) ends:
Disk size: 1241744336 bytes
Partition 1 (/system): start 74752; End 1123328; Size 1048576
Partition 2 (/cache): start 1123328; End 1999872; Size 876544
Partition 3 (/misc): start 1999872; End 2003968; Size 4096
Partition 4 (/staging): start 2003968; End 3096576; Size 1092608
Partition 5 (/btmac): start 3096576; End 3106816; Size 10240
Partition 6 (/?): start 3106816; End 3107840; Size 1024
Partition 7 (/?): start 3107840; End 3118080; Size 10240
Partition 8 (/data): start 3118080; End 124173312; Size 121055232
Partition 9: start 124173312; End 124174336; Size 1024
Given that /system mounts, I think if I had a stock dump from a tf201 of bytes 0-74752 might also be an alternative - I could verify the GPT table against above before I put it in.
Another option I can think of, comes from reference I see to a "backup GPT" held in last sector of GPT disks? If you look at partition offsets above, there is 1024 bytes at the end where I may get this information - but I think injecting in a dump of those first 74k bytes into mmcblk0 - as above - would be safer.
damonbrisbane said:
Was thinking about building LBA0 and LBA 1 separately, was going from that Wikipedia article, "...Legacy MBR information is contained in LBA 0, the GPT header is in LBA 1.." and I thought - perhaps naively - that an fdisk command with /mbr option would sort out LBA0, then I worry about GPT in LBA1, but maybe I am confusing fdisk /mbr option with another command (old DOS)?
Click to expand...
Click to collapse
I wouldn't suggest doing that. That would create a hybrid MBR. When a hybrid MBR disk is read using MBR, only the first four partitions can be visible (after redefining the partition table in LBA0). If the disk is read using GPT, all the partitions will be visible. I don't know if Android and Linux prefer MBR over GPT, but if they do, you might lose access to partitions 5-8.
By the way, the '/mbr' option is for the diskpart tool from MSDOS and Windows
damonbrisbane said:
Another option I can think of, comes from reference I see to a "backup GPT" held in last sector of GPT disks? If you look at partition offsets above, there is 1024 bytes at the end where I may get this information - but I think injecting in a dump of those first 74k bytes into mmcblk0 - as above - would be safer.
Click to expand...
Click to collapse
You're absolutely right. I had forgotten about this. Do you happen to know if those mmcblk0p# partitions are visible when the tablet is plugged into a Linux computer? If so, GPT fdisk can restore the partition table and GPT header from the backup GPT.
You would run something like this to restore the backup GPT:
http://paste.kde.org/488054/
EDIT: I found a version of gdisk compiled for Android by meghd00t (http://forum.xda-developers.com/showpost.php?p=24805392&postcount=74). You may be able to restore the backup GPT directly from the tablet
Download link from the post: http://dl.dropbox.com/u/64885133/gptfdisk.zip
Thanks Chen, i plan to try the gptfdisk tonight when I get home from work and can post the result.
One thing i'm not sure about is access mmcblk0 from linux - does this mean I can access the internal mmcblk0 of the tf201 directly through a linux device? Right now I access mmcblk0 solely through adb shell to CWM recovery.
damonbrisbane said:
Thanks Chen, i plan to try the gptfdisk tonight when I get home from work and can post the result.
One thing i'm not sure about is access mmcblk0 from linux - does this mean I can access the internal mmcblk0 of the tf201 directly through a linux device? Right now I access mmcblk0 solely through adb shell to CWM recovery.
Click to expand...
Click to collapse
No problem There's also an option to backup the GPT header and partition table to file. I'd suggest doing that just in case anything goes wrong.
I'm not entirely sure if the internal memory can be accessed directly from Linux. But from what I've been reading in the forums today, it seems that it might not possible (I'm pretty new to Android).
Hopefully gptfdisk will work via adb shell
Whew, we're off life support! and more importantly - my wife wont kill me for an Unauthorised Brick to The Birthday Device
Steps Performed
ADB - Write backup GPT to LBA1 mmcblk0
~ # ./gdisk /dev/block/mmcblk0
GPT fdisk (gdisk) version 0.8.4
Unsupported GPT version in backup header; read 0x00000000, should be
0x00010000
Partition table scan:
MBR: not present
BSD: not present
APM: not present
GPT: not present
Creating new GPT entries.
Command (? for help): r
Recovery/transformation command (? for help): ?
b use backup GPT header (rebuilding main)
c load backup partition table from disk (rebuilding main)
…
? b
Recovery/transformation command (? for help):
? c
Warning! This will probably do weird things if you've converted an MBR to
GPT form and haven't yet saved the GPT! Proceed? (Y/N): Y
Caution! After loading partitions, the CRC doesn't check out!
Recovery/transformation command (? for help): p
Disk /dev/block/mmcblk0: 124174336 sectors, 59.2 GiB
Logical sector size: 512 bytes
Disk identifier (GUID): 2E8491CC-AFFC-43B9-B1C4-97D2F258BE1C
Partition table holds up to 128 entries
First usable sector is 34, last usable sector is 124174302
Partitions will be aligned on 2048-sector boundaries
Total free space is 75709 sectors (37.0 MiB)
Number Start (sector) End (sector) Size Code Name
1 74752 1123327 512.0 MiB 0700 AP
2 1123328 1999871 428.0 MiB 0700 CC
3 1999872 2003967 2.0 MiB 0700 MC
4 2003968 3096575 533.5 MiB 0700 UP
5 3096576 3106815 5.0 MiB 0700 PR
6 3106816 3107839 512.0 KiB 0700 YU
7 3107840 3118079 5.0 MiB 0700 CA
8 3118080 124173311 57.7 GiB 0700 UA
Recovery/transformation command (? for help): w
Final checks complete. About to write GPT data. THIS WILL OVERWRITE EXISTING
PARTITIONS!!
Do you want to proceed? (Y/N): Y
OK; writing new GUID partition table (GPT) to /dev/block/mmcblk0.
Warning: The kernel is still using the old partition table.
The new table will be used at the next reboot.
The operation has completed successfully.
~ #
ADB/CWM - Exit recovery and attempt Virtuousprime ROM install
I then did exit recovery as per 1a http://forum.xda-developers.com/showthread.php?t=1514088
Upon reboot Virtuousprime wouldn't go as far as it got before. I went back into adb shell and did wipe data:
Wipe data/factory reset
Formatting /data
Error mounting /data !
Skipping format...
Formatting /cache
Formatting /sd-ext
Formatting /sdcard/.android_secure...
Error mounting /sdcard/.android_secure!
Skipping format...
Data wipe complete
Note the error on /data. Could not format /data either using the CWM mounts and storage menu. I named the partitions I knew about and formatted /data (mmcblk0p8) from adb shell:
Number Start End Size File system Name Flags
1 38.3MB 575MB 537MB ext4 system
2 575MB 1024MB 449MB ext4 cache
3 1024MB 1026MB 2097kB misc
4 1026MB 1585MB 559MB ext3 staging
5 1585MB 1591MB 5243kB fat32 btmac
...
8 1596MB 63.6GB 62.0GB ext4 data
mke2fs -t ext4 /dev/block/mmcblk0p8
I then found that CWM data/factory reset went through without errors:
Wipe data/factory reset
Formatting /data
Formatting /cache
..
Data wipe complete
And subsequently exit recovery and virtuous prime rom have installed OK, tested across reboot and shutdown
Cheers!
damonbrisbane said:
Whew, we're off life support! and more importantly - my wife wont kill me for an Unauthorised Brick to The Birthday Device
Click to expand...
Click to collapse
Haha, I'm glad I was able to help
Hi Folks,
I have tried everything...... But I can't get my BRICKED device back to life! Pleae help, the person who will FIX this wil be donated $20,- for his help, because i've tried everything that I know.
The problem is:
I have a TF101 and it's BRICKED
It has ClockworkMod Recovery v6.0.1.3 installed, TWRP is also recognized at last time I was live and kickin in ROM MANAGER, but YES I was stupid and flashed ClockworkMod Recovery v6.0.1.3. Now I can't get /sdcard/ mounted. ADB drivers can not be installed even in APX modus windows 8,7, and XP are all saying UNKNOWN DEVICE.
When I try to format /system the log says:
Formating /system ...
Done.
Inodes per group: 8192
Inode size: 256
Journal blocks: 2048
LabeL:
Blocks: 131072
Block groups: 4
Reserved block gorup size: 31
Created filesystem with 11/32768 inodes and 4206/131072 blocks
Done.
I:Can't format unknown volume: /sdcard
I:Can't format unknown volume: /external_sd
I:Can't format unknown volume: /emmc
I can't push a rom to anywhere with ADB
Please help me!!!! You'll earn $ 20,- when I get my device fixed with TWRP running and a good ROM.
:crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying:
Erik Stroot said:
Hi Folks,
I have tried everything...... But I can't get my BRICKED device back to life! Pleae help, the person who will FIX this wil be donated $20,- for his help, because i've tried everything that I know.
The problem is:
I have a TF101 and it's BRICKED
It has ClockworkMod Recovery v6.0.1.3 installed, TWRP is also recognized at last time I was live and kickin in ROM MANAGER, but YES I was stupid and flashed ClockworkMod Recovery v6.0.1.3. Now I can't get /sdcard/ mounted. ADB drivers can not be installed even in APX modus windows 8,7, and XP are all saying UNKNOWN DEVICE.
When I try to format /system the log says:
Formating /system ...
Done.
Inodes per group: 8192
Inode size: 256
Journal blocks: 2048
LabeL:
Blocks: 131072
Block groups: 4
Reserved block gorup size: 31
Created filesystem with 11/32768 inodes and 4206/131072 blocks
Done.
I:Can't format unknown volume: /sdcard
I:Can't format unknown volume: /external_sd
I:Can't format unknown volume: /emmc
I can't push a rom to anywhere with ADB
Please help me!!!! You'll earn $ 20,- when I get my device fixed with TWRP running and a good ROM.
:crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
This is the TF201 forums
flumpster said:
This is the TF201 forums
Click to expand...
Click to collapse
I have moved this thread to the right forum!
Thanks for telling me!
Hi guys, I Have a Xperia P LT22i Black and I'm here because I can't restore my backups that I always used, but now is useless. I'm on same kernel (Sony stock), same FW (6.2.A.1.100) and can't backup anymore, always give me error while restoring those 2. Here is last_log from /cache/recovery.
Backing up .android_secure...
.
com.trust5.odp-1.asec
com.quoord.tapatalkxda.activity-1.a
com.loudtalks-1.asec
com.whatsapp.wallpaper-1.asec
com.music.download-1.asec
com.facebook.orca-1.asec
me.pou.app-2.asec
com.kiloo.subwaysurf-2.asec
com.davidamado.MetalGearOuterHeaven
Backing up cache...
.
lost+found
dalvik-cache
recovery
last_log
log
No sd-ext found. Skipping backup of sd-ext.
Generating md5 sum...
chmod: /sdcard/clockworkmod/blobs/02c/§☻‼/♀~|♫: No such file or directory
chmod: /sdcard/clockworkmod/blobs/235/∟/☺>☼>♣~: No such file or directory
Backup complete!
Checking MD5 sums...
boot.img: OK
cache.ext4.dup: OK
data.ext4.dup: OK
system.ext4.dup: OK
.android_secure.vfat.dup: OK
couldn't find default
Found new backup image: /sdcard/clockworkmod/backup/2013-06-30.03.16.22//data.ex
t4.dup
Restoring data...
Creating filesystem with parameters:
Size: 2147483648
Block size: 4096
Blocks per group: 32768
Inodes per group: 8192
Inode size: 256
Journal blocks: 8192
Label:
Blocks: 524288
Block groups: 16
Reserved block group size: 127
Created filesystem with 11/131072 inodes and 17193/524288 blocks
warning: wipe_block_device: Discard failed
Unable to copy file ./backup/processed
data
user
0
idd
etc
bluetooth_bdaddr
wlan_macaddr
light_themes
GNB_DEBUG.txt
backup
processed
Error while restoring /data!
Click to expand...
Click to collapse
Can someone answer that? Thank you!!
I had a similar problem with twrp recently. I had to completely reflash my rom. I ended up totally deleting the whole twrp folder
And after re trying making and restoring a new backup all worked.
I could only assume corrupted data in that folder caused the issue
Sent from my 4.2.2 Xperia S via Tapatalk
Reflashing d entire rom is d only way ............
so as i did so
Yeah, I had to start all over, some told me to change the format of the backup, but when I press to change the format, it stuck and i have to force reboot the phone. Can't change the format, anyone know how to reinstall CWM or delete CWM? So I can install it fresh again?
Thanks to @munjeni for tipping me off in the right direction and to @judas1977 + @Tesla-MADAL93 for having done this on the Ace 2 I come from ~~
Everything else in this post applies to Gingerbread, scroll down to the 5th message for a more clear guide centered around a 4.1.2 ROM.
This is my annotated diary about the last 2 hours, I'm sorry if the story feels a little bit Dadaist but I don't want to encourage people who don't feel ready to try it, so please read all of it first and if anything is unclear ask instead of doing!!
I installed Busybox 1.22.1 (iirc) and replaced the default shell with bash (install Bash-X from market, copy /S/xbin/bash over /S/bin/sh, remove app if you like to). All of this was done with Gingerbread .188 and CWM 5.5.0.4 from Supercharged kernel.
Original partition table, with names added:
[email protected]:~$ adb shell
Code:
sh-4.2# fdisk -u -l /dev/block/mmcblk0
Disk /dev/block/mmcblk0: 7944 MB, 7944011776 bytes
4 heads, 16 sectors/track, 242432 cylinders, total 15515648 sectors
Units = sectors of 1 * 512 = 512 bytes
Device Boot Start End Blocks Id System
/dev/block/mmcblk0p1 1 2047 1023+ 0 Empty #### TA ("Trim Area") IMEI, BL UNLOCK, SIMLOCK ETC -- DO NOT TOUCH
Partition 1 does not end on cylinder boundary
/dev/block/mmcblk0p2 2304 3327 512 f0 Linux/PA-RISC boot #### SBL? Mem-init? Power management? PARAM?
Partition 2 does not end on cylinder boundary
/dev/block/mmcblk0p3 2048 2303 128 f0 Linux/PA-RISC boot #### unknown, as above
Partition 3 does not end on cylinder boundary
/dev/block/mmcblk0p4 3328 15269887 7633280 5 Extended #### GROUPS ALL FOLLOWING PARTITIONS FOR THEM TO FIT INTO THE 4-PARTS MBR SCHEME
Partition 4 does not end on cylinder boundary
/dev/block/mmcblk0p5 4096 20479 8192 4a Unknown #### another of the 4 unclear partitions
/dev/block/mmcblk0p6 20480 26623 3072 83 Linux #### MODEMFS (Samsung's "EFS") RADIO CALIBRATION
/dev/block/mmcblk0p7 26624 36863 5120 70 Unknown #### no idea either
/dev/block/mmcblk0p8 36864 53247 8192 83 Linux #### IDD (apparently related to usage stats reporting)
/dev/block/mmcblk0p9 53248 86015 16384 48 Unknown #### KERNEL
/dev/block/mmcblk0p10 118784 2215935 1048576 83 Linux #### SYSTEM
/dev/block/mmcblk0p11 2727936 6922239 2097152 83 Linux #### DATAFS
/dev/block/mmcblk0p12 2215936 2727935 256000 83 Linux #### CACHEFS
/dev/block/mmcblk0p13 86016 118783 16384 48 Unknown #### FOTAKERNEL?
/dev/block/mmcblk0p14 6922240 15269887 4173824 c Win95 FAT32 (LBA) #### SDCARD/EMMC/UMS
Partition table entries are not in disk order
so let's rearrange this list for easier thinking & reading
Code:
/dev/block/mmcblk0p1 1 2047 1023+ TA
/dev/block/mmcblk0p3 2048 2303 128 ?
/dev/block/mmcblk0p2 2304 3327 512 ?
/dev/block/mmcblk0p5 4096 20479 8192 ?
/dev/block/mmcblk0p6 20480 26623 3072 MODEMFS
/dev/block/mmcblk0p7 26624 36863 5120 ?
/dev/block/mmcblk0p8 36864 53247 8192 IDD
/dev/block/mmcblk0p9 53248 86015 16384 KERNEL
/dev/block/mmcblk0p13 86016 118783 16384 FOTAKERNEL?
/dev/block/mmcblk0p10 118784 2215935 1048576 SYSTEM
/dev/block/mmcblk0p12 2215936 2727935 256000 CACHEFS
/dev/block/mmcblk0p11 2727936 6922239 2097152 DATAFS
/dev/block/mmcblk0p14 6922240 15269887 4173824 SDCARD
great, the important (for us) stuff is contiguous so we can delete those partitions and recreate them
(if fdisk works like parted we must do that in numerical order, so system>data>cache>ums)
we must delete and recreate partition 13 with the same sizes
OTOH fdisk lets us experiment without saving in real time (!!!) but let's do this in recovery mode
Let's research the sizes we want first -- I find Link2SD's graphical df the best way to do this (see photo 1)
so 540 MB for /system should be enough (I have 454M used, account a safety margin as I integrate updates + FS overhead + 1000 vs 1024 units)
4,14 MB used on /cache... 7,8 MB should be more than enough (same size I used on my Ace 2 which had about 5 MB used there)
this large size is for dalvik cache on ROMs that store it there (vm.dalvik.dexopt-data-only=0 and vm.dalvik.dexopt-cache-only=1 or something)
494 MB on /data, but I'd probably want to change apps and stuff... let's try with 1,25 GB
but if we remove /system we'll have to reflash the rom from a zip, which I'd need to make...
let's leave that partition alone for this first time
reboot now
Click to expand...
Click to collapse
Launching fdisk:
#### SONY
#### SONY (red green blue lightbar)
#### + button
#### CWM-based recovery v5.5.0.4
[email protected]:~$ adb shell
- exec '/system/bin/sh' failed: No such file or directory (2) -
#### No shell in ramdisk? Very lame...
#### [Mounts and storage]
#### [Mount /system, unmount everything else]
[email protected]:~$ adb shell
sh-4.2# fdisk -u /dev/block/mmcblk0
Command (m for help):
What I did in fdisk:
u #### change units to sectors
d #### delete
14
d
13
d
12
d
11
c #### disable cylinder rounding
n #### new
l #### logical partition
First sector (3334-15269887, default 3334): 2215936
Sector 2215936 is already allocated #### Apparently this version of fdisk makes you waste a sector...
First sector (2215937-15269887, default 2215937): Using default value 2215937
Last sector or +size or +sizeM or +sizeK (2215937-15269887, default 15269887): +1600M
#### CACHEFS:
n
l
First sector (3334-15269887, default 3334): 5340938
Sector 5340938 is already allocated
First sector (5340939-15269887, default 5340939): Using default value 5340939
Last sector or +size or +sizeM or +sizeK (5340939-15269887, default 15269887): +8M
#### FOTAKERNEL
n
l
First sector (3334-15269887, default 3334): 86016
Sector 86016 is already allocated
First sector (86017-15269887, default 86017): Using default value 86017
Last sector or +size or +sizeM or +sizeK (86017-118783, default 118783): Using default value 118783
t
Partition number (1-14): 13
Hex code (type L to list codes): 48
Changed system type of partition 13 to 48 (Unknown)
#### USB STORAGE
n
l
First sector (3334-15269887, default 3334): 5356564
Sector 5356564 is already allocated
First sector (5356566-15269887, default 5356566): Using default value 5356566
Last sector or +size or +sizeM or +sizeK (5356566-15269887, default 15269887): Using default value 15269887
c
Partition number (1-14): 14
Hex code (type L to list codes): c
Changed system type of partition 14 to c (W95 FAT32 LBA)
w
The partition table has been altered.
Calling ioctl() to re-read partition table
fdisk: WARNING: rereading partition table failed, kernel still uses old table: Device or resource busy
sh-4.2# reboot
Now enter CWM again and factory reset -- you'll get an error as it can't delete /sdcard/.android_secure as it's unformatted
(and for that matter this CWM can't format /sdcard either...)
No problem apart from skipped heartbeats, boot into Android and format it from the settings! (see photo 2)
Well, the last screenshot speaks for itself... but I'll repeat, don't try this at home! (Have a friend try it so you'll have someone to blame if it gets bricked)
Very interesting... It causes problems?
Inviato dal mio ST25i utilizzando Tapatalk
ale467 said:
Very interesting... It causes problems?
Click to expand...
Click to collapse
Unlike my example, you must have over 50M free on /cache (at least in Gingerbread) or cheat by bind-mounting it somewhere else... or give up on directly installing stuff from the market
I tried bind mounting /cache to /data/local/tmp/cache but Google Play is still broken, so I guess you'll want a 57M partition there...
Also, you can always return to stock layout by flashing a full ROM in green light download mode, then wiping /sdcard from settings
I'm going to update this for 4.1, it's even somewhat easier and more predictable
----------------
1: think of the rough partition sizes
Code:
system (350M)
data (1,5G)
cache (280M) ## keep in mind whether ROM uses this for dalvik-cache and at least in 2.x Google Play downloads there
sdcard (remaining space)
2: make sure you have some files ready
→ROM in recovery zip format
→Backup of everything you want
→Kernel with fdisk in ramdisk
→ADB known working in recovery and normal mode
→Fixed busybox (http://forum.xda-developers.com/attachment.php?attachmentid=1057725&d=1336884034)
3: enter recovery and dump partition table (adb shell, fdisk /dev/block/mmcblk0, p)
Unlike my previous experiment, I'll calculate sizes in cylinders -- harder but fdisk appears to work better that way
Code:
Disk /dev/block/mmcblk0: 7944 MB, 7944011776 bytes
4 heads, 16 sectors/track, 242432 cylinders
Units = cylinders of 64 * 512 = 32768 bytes
[...]
/dev/block/mmcblk0p10 1857 34624 1048576 83 Linux #SYSTEM
/dev/block/mmcblk0p11 42625 108160 2097152 83 Linux #DATAFS
/dev/block/mmcblk0p12 34625 42624 256000 83 Linux #CACHEFS
/dev/block/mmcblk0p13 1345 1856 16384 48 Unknown #FOTAKERNEL, move this on another line if it helps you think better but put it back there after calculations
/dev/block/mmcblk0p14 108161 238592 4173824 c Win95 FAT32 #UMS
so our work area starts at cylinder 1857 and ends at 238592!
4: calculate partition sizes (I'll only list start & end cylinders for clarity)
Code:
/dev/block/mmcblk0p10 1857 12538 << 1857 + (350000000÷32768)
/dev/block/mmcblk0p11 12538+1 >> 12539 58315 << 12539+(1500000000÷32768)
/dev/block/mmcblk0p12 58315+1 >> 58316 66861 << 58316 +(280000000÷32768)
/dev/block/mmcblk0p13 1345 1856
/dev/block/mmcblk0p14 66861+1 >> 66862 238592
5: remove partitions (d, 14, d, 13, ..., 10)
6: create partitions (n, l, 1857, 12538, repeat for next row)
7: retype partitions (t, 13, 48, t, 14, c)
8: save changes (w, reboot) - enter recovery again, you should get 5 "E: Can't {mount|open} /cache/[...]" lines
9: go to mounts and storage and run all 4 formats, sdcard will probably fail -- if it doesn't skip to step 13
10: install fixed busybox (adb push '/home/riki/Desktop/busybox' /cache/)
11: enter adb shell, make it executable (chmod +x /cache/busybox)
12: format media partition (/cache/busybox mkfs.vfat /dev/block/mmcblk0p14)
13: quit shell, mount /sdcard in CWM
14: adb push your ROM to /sdcard, install it and reboot!
This is so interesting, I've being doing this on a Samsung Galaxy SCL to fix it as its internal storage and /data partition were totally corrupted. I used parted instead of fdisk to repartition the external SD and edit then kernel's RAM disk to make it mount /data in one of the new partitions. Because of this that I've been doing lately, I'm thinking of using fdisk in my Xperia U too to have more available space in internal SD, that would be great, as I use dual boot feature.
I think I'll do this when I'm be fed up of Jelly Bean being the main ROM and KitKat just the secondary one.
By the way, I think it can be possible to leave enough free space before mmcblk0p14 to create my secondary ROM's partitions there (mmcblk0p15 for /system, mmcblk0p16 for /data and mmcblk0p17 for /cache) instead of creating system.ext4, data.ext4 and cache.ext4 inside my internal SD and mounting them in loop devices... What do you think? Could I brick my phone doing that? I've asked here too just in case.
The only thing I'd have to do is to format my mmcblk0p15 using mke2fs to set the same UUID as in mmcblk0p10 just if my secondary ROM doesn't boot (but I think this wouldn't be necessary):
Code:
mke2fs -T ext4 -O has_journal,extent,huge_file,flex_bg,uninit_bg,dir_nlink,extra_isize -U [COLOR="Silver"][mmcblk0p10's UUID][/COLOR] -I 256 /dev/block/mmcblk0p15
You've explained this how-to so well, @Ryccardo! Thanks for this tutorial.
Many, many thanks to you, sir!
Thanks to you i was able to increase data partition on my P (similar partition scheme to U).
Other tutorials weren't so useful than yours and i was searching quite a lot. Thank you, live in wealth!
Hi all,
I have taken a look at the threads that are similar to mine, as the forum suggests, and a lot more for about a week now.
I have not managed to solve my problem yet, I hope you will help to find a solution.
I own a Samsung Ace 2 GT-i8160.
A month ago a decided to change the stock rom and flashed my phone with a CM11 rom.
Everything worked perfectly.
However suddenly my phone has started rebooting by itself.
Every 2 or 3 minutes it reboots automatically. In fact is switches off and starts over again, it does not perform a software reboot.
I have tried these:
I have tried to use another battery, my wife owns the same mobile and we switched batteries.
I have tried to install the stock rom. The whole process seems to be perfect but when the phone reboots, everything is just like before the install. The phone boots into the old CM11 and reboots repeatedly every 2 minutes!
I have tried to install the CM12 rom. Now the setup seems to succedd again. However the phone again enters the old CM11 and reboots every 2 minutes. However now, there is this warning: symlink: some symlinks failed
I have tried to install the CM11 rom again. The whole process seems to be perfect but when the phone reboots, everything is just like before the install.
I try to format every partition (except for the external sdcard) and no error comes up. If i mount the partitions everything is in place! Nothing has been deleted!
I tried to format the /data partition with this command from adb shell:
Code:
mke2fs -t ext4 -c -v /dev/block/mmcblk0p5
Here is the output of the command:
Code:
mke2fs 1.41.14 (22-Dec-2010)
fs_types for mke2fs.conf resolution: 'ext4'
Calling BLKDISCARD from 0 to 1308622848 failed.
Filesystem label=
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
Stride=0 blocks, Stripe width=0 blocks
80000 inodes, 319488 blocks
15974 blocks (5.00%) reserved for the super user
First data block=0
Maximum filesystem blocks=327155712
10 block groups
32768 blocks per group, 32768 fragments per group
8000 inodes per group
Superblock backups stored on blocks:
32768, 98304, 163840, 229376, 294912
Running command: badblocks -b 4096 -X -s /dev/block/mmcblk0p5 319487
sh: badblocks: not found
Writing inode tables: done
Creating journal (8192 blocks): done
Writing superblocks and filesystem accounting information: done
This filesystem will be automatically checked every 21 mounts or
180 days, whichever comes first. Use tune2fs -c or -i to override.
If if mount the partition no change has been done!
fdisk yields this warning:
fdisk: WARNING: rereading partition table failed, kernel still uses old table: Invalid argument
I guess - it is only a guess - that for some reason the kernel protects the phone filesystems! How can I stop the kernel from doing that? Can i flash my phone with a tool, avoiding the use of the kernel?
Can you suggest something else?
In case you may ask, at this time in my phone are installed:
CWM-based Recovery v6.0.5.0
CyanogenMod: 11-20140807-unofficial-codina
Android Version: 4.4.4
Kernel Version: 3.0.101 - CyanogenMod-g17eea61
Thanks a lot for reading, I hope a solution comes up!