Hey!
My Moto E 2 LTE XT1524 restarts itself while loading apps or sometimes on standby mode.
I tried to flash the stock firmware and restore it, but problem remains there.
Then i flashed CM12.1 and after the flash, problem remains.
Then i found a thread Squid Kernel for Moto E LTE (2015) and i flashed the Kernel zip file that matches for CM12.1 "r11e" and yeah!! problem solved...... but! but! but!................ when i flash CM13.1 and the matching Kernel zip file r16g, r17 and r18 versions (tried one by one), all of these bricked the firmware and i had to reflash the CM13.1 zip for booting it into the system and it restarts again on usage. Those kernel files just didn't work this time........... i need help in this situation.
I am fed up of using CM12.1 just because of that it is the only stable ROM and the Squid Kernel r11e is the only stable kernel file that works fine on my phone, any other kernel file didn't work on it... please help me to fix this thing. At least i knew that this is kernel problem which cannot be fixed with stock ROM, i have to use custom ROM as my daily driver.... but this also needs a good Kernel zip file which works fine with my device... i have tried alot of kernels files..... but...... failed to have a smooth ride on my phone.....
Thank you for posting this in the right section. Unfortunately, I do not know how to fix your issue with the information provided but you may want to pull a logcat buddy, catch the issue in act and we'll go from there
umairprince2009 said:
Hey!
My Moto E 2 LTE XT1524 restarts itself while loading apps or sometimes on standby mode.
I tried to flash the stock firmware and restore it, but problem remains there.
Then i flashed CM12.1 and after the flash, problem remains.
Then i found a thread Squid Kernel for Moto E LTE (2015) and i flashed the Kernel zip file that matches for CM12.1 "r11e" and yeah!! problem solved...... but! but! but!................ when i flash CM13.1 and the matching Kernel zip file r16g, r17 and r18 versions (tried one by one), all of these bricked the firmware and i had to reflash the CM13.1 zip for booting it into the system and it restarts again on usage. Those kernel files just didn't work this time........... i need help in this situation.
I am fed up of using CM12.1 just because of that it is the only stable ROM and the Squid Kernel r11e is the only stable kernel file that works fine on my phone, any other kernel file didn't work on it... please help me to fix this thing. At least i knew that this is kernel problem which cannot be fixed with stock ROM, i have to use custom ROM as my daily driver.... but this also needs a good Kernel zip file which works fine with my device... i have tried alot of kernels files..... but...... failed to have a smooth ride on my phone.....
Click to expand...
Click to collapse
Try disabling Kernel Panic with HEBF Optimizer. You can get it on XDA (more features) or Google Play.
Related
Hello guys ,, I have downloaded VK ICS ROM V5.1.3 and i have put it in the internal memory of my device. I am now on the previous version of the same rom V5.1.2 , when i want to flash the new rom in the recovery mod,, it takes only few seconds no more than five seconds and says the installation was successful but actually when i reboot the phone, it stops on the first Logo which appears in the beginning of the Restart process. Although i do all the wipes before i start to flash the rom, i am unable to flash it
Plz help me
Guys I need help please
Flash thru odin instead, that might work
St0rmzx said:
Flash thru odin instead, that might work
Click to expand...
Click to collapse
the file is not appropriate except for rocoverymod so how can i flash it throw Odin !!!!!!
Flash to stock then flash to the new version, make sure the file isn't corrupted.
St0rmzx said:
Flash to stock then flash to the new version, make sure the file isn't corrupted.
Click to expand...
Click to collapse
I did that but still doesn't work
Guys !!!!!!! heeeeeeeeeeeeelp
Hi,
Did you tried another rom?
Flash a new kernel, (siyah) then re-download the rom and flash again
ruicc said:
Hi,
Did you tried another rom?
Flash a new kernel, (siyah) then re-download the rom and flash again
Click to expand...
Click to collapse
yes bro different roms are normally installed and i even changed my kernel to siyah but still the problem occurs !! the previous version which is 5.1.2 gets flashed normally,
Note:
I flashed to an official 4.0.3 rom and then rooted my device to flash this rom but doesn't work and i have this problem only with this version of VK roms other roms are okay ,,, even the Rom file (zip) is okay not corrupted !!
this is the weird thing which i faced with my android device. i flashed to cm10.1 + lupus jb kernal. now my device keep restarting. i thought it was rom fault. then i tried jellyvanilla ex1.0. but problem was same. then i reflashed to stock rom via seus. but still my device keep rebooting when i use internet. im not sure what is the reason for it. i did everything which i can do.
anybody have any idea about this problem hope i will get a answer
cm roms need freexperia kernal. you can find the kernal (boot.img) file in the rom zip file. flash that kernel and reflash the rom.
RavinduSha said:
cm roms need freexperia kernal. you can find the kernal (boot.img) file in the rom zip file. flash that kernel and reflash the rom.
Click to expand...
Click to collapse
but problem is even get reboot on stock rom
not sure if this works or not. try to reflash or change the kernal.
RavinduSha said:
not sure if this works or not. try to reflash or change the kernal.
Click to expand...
Click to collapse
did it several time bro, i think its not matter of rom
Hi every one
i run (cm-10.1-20130519-NIGHTLY) on my gt-i9100
and its work fine for me , when i update it with ota its work fine but the wifi cant find any thing .
yesterday i download
(Resurrection_Remix_KK_v5.0.4-20140227-i9100) with
CWM-KitKatCompatible-i9100 v 6.0.4.7,
and i have the same problem everything work fine but wifi found nothing
i try Siyah-s2-v6.0b5-CWM kernel but after the Siyah logo dim out nothing happen for about 90 min but the phone heat up .
after flash (Resurrection_Remix_KK_v5.0.4-20140227-i9100) again i flash gustavo kernel (kk-kernel-22-02-CWM) but nothing happen
i also try ( cm-11-20140301-NIGHTLY-i9100) and dirt unicorn ( du_i9100_20140218-0916)
with the same problem
any help please
tareq agha said:
Hi every one
i run (cm-10.1-20130519-NIGHTLY) on my gt-i9100
and its work fine for me , when i update it with ota its work fine but the wifi cant find any thing .
yesterday i download
(Resurrection_Remix_KK_v5.0.4-20140227-i9100) with
CWM-KitKatCompatible-i9100 v 6.0.4.7,
and i have the same problem everything work fine but wifi found nothing
i try Siyah-s2-v6.0b5-CWM kernel but after the Siyah logo dim out nothing happen for about 90 min but the phone heat up .
after flash (Resurrection_Remix_KK_v5.0.4-20140227-i9100) again i flash gustavo kernel (kk-kernel-22-02-CWM) but nothing happen
i also try ( cm-11-20140301-NIGHTLY-i9100) and dirt unicorn ( du_i9100_20140218-0916)
with the same problem
any help please
Click to expand...
Click to collapse
Flash kitkat roms only from cwm 6.0.4.3+ and other roms with lower version of recovery. This is a known prob with kitkat recoverys
bhavstech said:
Flash kitkat roms only from cwm 6.0.4.3+ and other roms with lower version of recovery. This is a known prob with kitkat recoverys
Click to expand...
Click to collapse
thank you for replay
but i previously use many cwm versions 6.0.1.3 and 5 v and 4.0.1.5 with the same problem .
but once when i flash Siyah-s2-v6.0b5 kernel , i use fix permission command from its recovery version and flash Resurrection_Remix_KK_v5.0.4-20140227-i9100 again , the wifi work for about 1 min and stop working.
whats the solution ?
tareq agha said:
thank you for replay
but i previously use many cwm versions 6.0.1.3 and 5 v and 4.0.1.5 with the same problem .
but once when i flash Siyah-s2-v6.0b5 kernel , i use fix permission command from its recovery version and flash Resurrection_Remix_KK_v5.0.4-20140227-i9100 again , the wifi work for about 1 min and stop working.
whats the solution ?
Click to expand...
Click to collapse
Kitkat roms have to be flashed from cwm 6.0.4.3 +
bhavstech said:
Kitkat roms have to be flashed from cwm 6.0.4.3 +
Click to expand...
Click to collapse
i use this version CWM-KitKatCompatible-i9100 v 6.0.4.7
and still not work
and thank u again
The two of you in this thread are talking about two separate things. Yes you need to flash KitKat using a CWM 6.0.4.3+.... But OP has stated he's done that, so that's fine. The flash worked fine, but wifi doesn't.
OP, first try using a static ip address. If that doesn't work, time for you to flash a stock ROM and test wifi. Flash it with Odin using the stickied guide at the top of this forum, or use Mobile Odin, up to you.
If wifi works on stock ROM, then that's good... No hardware fault. If it doesn't work on stock with a static ip, it could be your router. Else, it's hardware fault and time for a service centre.
Sent from a galaxy far, far away
thanks all for replay
the problem is fixed
i change the wi-fi region code and every thing work fine , just like that.
and again thanks all
Hi Guys!
Today I need your help. My moto e runs perfectly on kitkat roms only. When I flash lp or mm roms, it's system ui starts force closing. This is how the problem started:
I was on cm13 nightly and I decided to update my twrp from play store. So, I downloaded the twrp manager app from play store and updated my recovery to 3.0.0. And the phone worked perfectly until the next day, when it started giving Fc's all of a sudden. I rebooted to recovery and made a full wipe including internal storage. Then I flashed cm11 and flashed gapps. The ROM booted up perfectly and had no fc's at all. So I decided to flash mm again. I flashed AOKP marshmallow but it again started giving me FC's. So, I reverted back to cm11and found no fc's again.
Here's the list of ROMs I tried and was unsuccessful each time:
AOKP(MM)
AOSP(MM and LP)
Cm13
Cm12.1
Blisspop(MM and LP)
Tesla ROM(LP)
Crdroid(MM)
ZephyrOS(MM)
AICP(MM)
Here's the list of ROMs I flashed and the device didn't give any fc's:
Cm11 nightly
Stock ROM Optimized
Stock ROM Full
CrDroid(kitkat)
Please guys I am in need of Deliberate help. Please do not post condolence comments like,"Strange issue mate, Sorry I don't know, Best of Luck". Please post only if you know the method or you have any links to the method.
In need of your help,
Regards,
PoseidonKing
I had the same issue with other MM roms. I got no fc error on CM13 and Resurrection Remix MM rom. Only these two mm Roms worked for me.
It's surely a device hardware issue. If only kitkat based roms work in your condor, then maybe it doesn't properly support art framework. So your last resort maybe going to service center
Sent from my Moto E
Try flashing factory image
Sent from my Moto E using Tapatalk
i think the problem is in the recovery. download cwm recovery img and flash it with fastboot and after that wipe everything including internal storage (do not reboot recovery at that tyme or before installing rom ) do not wipe ur sd card and then install rom without gapps and boot up after sucessful boot then again boot to recovery and install gapps... if problems remains same then try downloading other gapps package for 6.0 (preferred open gapps).
no need all of this, just record the logcat and post here, surely you'll get proper fix!
I think Twrp 3.0 is causing this revert to old 2.8 version.It is nothing to do with hardware if it is a hardware related problem then you can't even switch on phone.
Agreed! Custom recoveries known to, often cause these sort of problems.. Give the twrp 3.0.2 by magdoez or 2.8.7 a try.. These are the ones that work perfectly for me.
Try updating recovery from your current recovery itself & reboot.. Then try the aforementioned mm roms..
piku 123 said:
I think Twrp 3.0 is causing this revert to old 2.8 version.It is nothing to do with hardware if it is a hardware related problem then you can't even switch on phone.
Click to expand...
Click to collapse
Thanks bro, but the method ain't working. I am currently on TWRP 2.7.1.0 and I still face the same problem...
Adarsh1998 said:
no need all of this, just record the logcat and post here, surely you'll get proper fix!
Click to expand...
Click to collapse
Okay, thanks! But how the hell do I record a logcat??
PoseidonKing said:
Okay, thanks! But how the hell do I record a logcat??
Click to expand...
Click to collapse
Refer this thread: http://forum.xda-developers.com/showthread.php?t=1726238&page=28
Sent from my Moto E using Tapatalk
Hi guys,
Thank You everyone for your generous and quick help. My Moto E is fixed now. I flashed cyanpop mm and then tried the adopted sd option. Rebooted the device and now it is working perfectly. Though it wouldn't have been possible without my brother's help @Andy1911. Thank you once again to all of them who helped me.
Regards,
PoseidonKing.
There are no Android 10 Kernel threads that I could find, so i want to know if there are any kernels for Android 10 (Currently using the Bliss ROM) that have the Wireguard kernel module ?
Yoda007 said:
There are no Android 10 Kernel threads that I could find, so i want to know if there are any kernels for Android 10 (Currently using the Bliss ROM) that have the Wireguard kernel module ?
Click to expand...
Click to collapse
? KalinaNegev: Continuum Turbulence 2 - Kernel
? Redmi Note 3 Pro (Kenzo)
? By MocaRafee
? 24/03/2020
? Changelog:
* Added back WireGuard Support
* Added some optimization to the Audio
* Overclocked CPU and GPU DDR to 1296MHz and BIMC to 648MHz for the OCed variant
Big thanks to @Krittin for the Overclocked DDR & BIMC
? Additional Info:
* Support AOSP (Nougat, Oreo, Pie, Ten)
? Notes:
* Available 4 version: Normal, Normal with JackFix, OC, and OC with JackFix.
* Some notes about additional optimization based on experience. READ HERE.
Download Link:
MOD EDIT: Link Removed
? Subscribe: nTu21 ?
#kalinanegev #kernel #kenzo
Thanks, the kernel module option is now available in the Wireguard app, but unfortunately is not working - when i click to enable it it tries but does not work. So if you encounter another kernel that supports it in the future, please post the link here.
Yoda007 said:
Thanks, the kernel module option is now available in the Wireguard app, but unfortunately is not working - when i click to enable it it tries but does not work. So if you encounter another kernel that supports it in the future, please post the link here.
Click to expand...
Click to collapse
Try this
Elindir kernel
https://github.com/androbada525/Eli...4/Elindir-v4-60Hz-kenzo-22032020-05.47.08.zip
Note:
Never flash custom kernel over another custom kernel.
Always dirty flash the current rom zip first .
before flashing this kernel. Dirty flash ur current rom zip To restore stock kernel.
Then flash this kernel and wipe cachedalvik.
Thank you! Will try next week (tried the v4 Elindir with no success but did it over another custom kernel, so need to try again over stock ROMs) since before i was trying different kernels i did a nandroid backup, flashed a kernel, then restored the nandroid backup. After restoring a nandroid backup i got a bootloop and had to return to an Android 9 backup., and i am not in the mood to set up my phone again this weekend. Your way (dirty flashing of rom to get old kernel back) sounds much faster heh.
BTW: Is the nandroid backup not working a specific ROM issue (Bliss) or does it happen with all Android 10 ROMS ? I have the latest 3.3.1 official TWRP.
Yoda007 said:
Thank you! Will try next week (tried the v4 Elindir with no success but did it over another custom kernel, so need to try again over stock ROMs) since before i was trying different kernels i did a nandroid backup, flashed a kernel, then restored the nandroid backup. After restoring a nandroid backup i got a bootloop and had to return to an Android 9 backup., and i am not in the mood to set up my phone again this weekend. Your way (dirty flashing of rom to get old kernel back) sounds much faster heh.
BTW: Is the nandroid backup not working a specific ROM issue (Bliss) or does it happen with all Android 10 ROMS ? I have the latest 3.3.1 official TWRP.
Click to expand...
Click to collapse
Stay on android 9 . 10 roms got issues with flashing procedure.
To flash Most of the 10 roms u need to strictly follow
Wipe all, format data, reboot to recovery again , install rom and gapps. Only then 10 will boot.
Even before restoring nandroid u need to do format data command.
They say its happens coz of broken installation script on 10.
Android 9 flashing instruction is very simple.
Factory reset
Install rom and gapps
Reboot.
Now encryption on 10 is fixed in latest havoc, syberia.
I m waiting for bliss to fix it.
Black_Stark said:
Note:
Never flash custom kernel over another custom kernel.
Always dirty flash the current rom zip first .
before flashing this kernel. Dirty flash ur current rom zip To restore stock kernel.
Then flash a kernel and wipe cachedalvik.
Click to expand...
Click to collapse
Or you can just backup the existing boot.img and reflash if needed? No? Also there's this twrp flashable module by AnggaSync which cleans the boot.img for flashing a kernel.